corporate innovation value creation on basics of interior ... · this confidential presentation...

Corporate Innovation Value Creation on Basics of Interior Parts

Investor Day - February 10, 2017 - Redditch

Disclaimer

2

©2016 GRUPO ANTOLIN-Irausa, S.A. All rights reserved

This Confidential Presentation (the “Presentation”) has been prepared by Grupo Antolin-Irausa, S.A. (the “Group”) for information purposes only. The distribution and use by recipients of the information contained herein and any other information provided to the recipient by or on

behalf of the Group or its representatives is strictly confidential and the recipients bind themselves to strictly limit within their respective organization the circulation, copying and disclosure of the information contained in the Presentation. Except with the expressed consent of

the Group, you may not use, distribute, sell, modify, revise, republish, post or create derivative works (where applicable) of the trademarks, logos, information or other material or content in this Presentation. The Group has prepared this Presentation with due care based on available information; however, it does not accept any liability whatsoever for the contents or interpretation of the information

provided herein. The Group makes no representation or any other form of assurance as to the accuracy or completeness of the information in this document.

Agenda

3

► Introduction

► New major trends on Automotive Interiors

► Our answer from Grupo Antolin Innovation


Grupo Antolin, an Industrial Company

4

Talent

28,500 motivated individuals.

75 nationalities

Financial Strength

Global Presence Innovation Products

2016 annual Consolidated

sales > €5,287 Mio capex > €336 Mio

More than 160 production plants and centers Just in Time across 26 countries

We innovate today to obtain a

sustainable future > every year 3% of revenues but no limits for value

creation projects

OverheadsDoors

LightingCockpits

Interior TrimSeating


Agenda

5

► Introduction




Four major trends

6

Source: Roland Berger (2017)



New MobilityPeople, life on board, shared, distance, new functionalities by cheaper technologies, …. request new interiors design, and parts will suffers a disruptive changes to satisfice them

Power Train Electrification

8



Smart vehicles by Connectivity

9



Autonomous

10

Source: European Commission (2016)

The arrival of the fully autonomous vehicles is expected by the end of this decade


New demands, new product landscape

New interiors

11

Products for:

• Shared mobility

• Exclusive mobility

• Mobility as a Service

• Transport Capacity as a Service

• …….


12

And one fifth : ‘Smart Production”

STRICTLY CONFIDENTIALSource: Roland Berger (2015) Investor Day - February 10, 2017 - Redditch

Agenda

13

► Introduction




Challenges of Grupo Antolin

14

• Keep our competitiveness

• Integrate new technologies

• Develop new skills

• Value creation, where it would be reasonable


Don´t forget: Basics of Automotive Interior Business

15

LOW COST

HIGH TECHICAL PERFOMANCE ON BASIC TECHNOLOGIES (INCLUDING SAFETY)

LOW WEIGHT

There are a huge a amount of functionalities and technologies that would be candidates to create value in the interior or the vehicle but only a few of them will become a reality

HIGH QUALITY

PRODUCT VALUE

+ THE HIGHEST COMPETITIVENESS


Basics lines of innovation

16Investor Day - February 10, 2017 - Redditch

17

Lean and Open Innovation Ecosystem

With full involvement of:- Advance Engineering- Business Development- Quality- Laboratories- Graphic Engineering- Purchasing- Simulation- …..

- Strategic Research Centers

- Strategic Suppliers


Lean and Open Innovation Ecosystem

18

PHASE I:

“ Generic” Projects classified by Knowledge areas (ideas)

PHASE II:

Specific programs, focused on a product or process. - Concept definition- Validation plan- Prototypes manufacturing

PHASE III:

- Commercial : promotion of innovative products or processes

- Technical: support for the introduction of innovations into the first development projects

Dossier of Pre-validation

Innovation Program closure dossier (technology is validated)

Creation of Innovation

Experts Network(CI and BUs/AEs)

Innovation Program DevelopmentResponsible:

Corporate Innovation

Introducing Innovation into the

marketResponsible:

AE& BU

Organic Materials

Metallic Materials

Mechanisms & Architecture

Hybrid Structures & Composites

Advanced Manufacturing

Industrial Design & Fabrics

Electronics & Lighting

Pilot Means

Validation & Applied Eng.

……

• Innovation can be developed

- in any of GA companies, sites or departments

- on products and process

- always under the Innovation “Process and Budget”

- this activity is reported directly to ExCom on a quarterly bases

Cockpits / Instrumental Panels

Soft Trims


Our “3rd living place”: Design for Milennials

19

“Automotive interiors design and parts will suffers a disruptive changes”


Life on boardSmart and integrated lighting to generate different atmospheres, feelings and offer information in different parts of the interior

Investor Day - February 10, 2017 - Redditch 20

Smart solutions & Connectivity


Smart solutions & ConnectivitySmart sensors every where


High range of customization


25

Our innovate solutions portfolio validated (Ph3)► Backlit Trim► Surpright ► Novaform (high quality fabric

covered)► Agro - PP (PP + Sisal fibers for

injection)► New Fillers: Micro talc, MOS

Milliken Hyperform HPR 803-i► Chemical Foaming► Capacitive Sensor for Pockets► Electronics for Plastic Windows

Elevators► Fabrics BAMBOO, SAMOA,

SWAN► Lit Headliners► Hybrid backrest structures

(steel-plastic)► Dynamic Ambient Lighting

► Acoustic performance HDL► Projection Module► ILM / Dome Lamp► PWR, MPWR, SPWR, …► DHM +, DTM +, …► SEAT LATCH G2/G3► Composite rear foldable

Backrest► Anchorage with liberty

position and automatic electrification for removable seats

► Frames in AHSS, Aluminum► S-Sential (mechanisms and

frame simplification)► Laser engraved vanity

mirrors

► Foamed plastic sun visor► Hybrid PP/Foam sun visor► PP Natural fibers / Back

injection► Magnesium structural parts► Headliners - Green materials► Anticorrosion powder coating► Seamless leather passenger

airbags► Faux seam with live stitching -

vacuum laminated and cast skin constructions

► …..


Overview of Innovation/AE Projects (Ph2: Validation)

26

Intentionality blank for distribution

Total: > 26 phases 2 - Validation < 1,5 year


Some examples of Innovation/AE (Ph1: Research)

27

►In industrial design costumer and OEM needs for individualization and personalization, an intelligent luggage compartment management systems, storage space concepts, Bijou effects …

►In innovative surfaces fabrics, natural looking materials in A face, digital printing, halo effects, Fake illuminated surfaces …

►In organic materials fillers, additives, organosheets, recycled and renewable raw materials, PC+ (glazing) …

►In electronics conductive inks for 3D parts, touch sensors, smart/connected functions, components integration over substrate, integration of smart elements, view systems, in-vehicle entertainment systems …

►In lighting OLEDs, 3D Effects, Silicon Optics, High power lighting spots, gradual illumination effects, night vision systems, picoprojectors ...

►In mechanisms & architectures DTM+, hybrid car cross been, easy Ingress / egress, noise management , cockpit architectures, INTEGRATION …

►In advanced manufacturing personalization process for plastics and textiles, tools and means, additive manufacturing, big data, sensors, actuators, connectivity , augmented reality ……. an so on


Serial applications vs. short/mid term Innovative Solutions & long term Visions

Time line

Leve

l of i

nteg

ratio

n

Serial Applications (current)• IP/Cockpit, CC, DT• Separate light unit

light pipe, support, electronics• Many bought out parts

• GA content often limited to lighting components or plastcis / assembly

Function Integration (1st step)• Integration of components

into plastic carrier- light pipe- support

2D Ambient Lighting (2nd step)• Transfer of Lighting conce

pt- Lighting a pipe tolighting an area

- Light curtain in front of part

to backlighted area• Lighting becomes part of

trim manufacturing process

Grupo AntolinIntegrated Ambient

Lighting Interiors (Evolution)

• Full interiorslighting concept

• GA with full product portfolio

• Smart Interiors (textiles & plastics,

etc. provide function)

0

1 23

i.e. GA Integrated Ambient Lighting Roadmap


www.grupoantolin.com

jignacio.villacampa @grupoantolin.com

Tn. +34 947 47 7792

Thanks so much for your attention

corporate innovation value creation on basics of interior ... · this confidential presentation...

Documents