corrosion inhibitors - chemtool incorporated...thixotropic and corrosion inhibitors intended to...

CORROSION INHIBITORSCHEMTOOL INCORPORATED

CHEMTOOL MISSIONOur mission is to leverage our world class manufacturing,

customized packaging capabilities and industry leading

technology to create sustainable value for our customers.

OUR VISIONTo become the preeminent specialty lubricants, grease and

functional fluids solution provider to the global marketplace.

Superior Formulas Sustainable SupportWorldwide Distribution

Chemtool Incorporated offers a complete line of products to meet all corrosion inhibitor applications. Whether your application needs are protecting short-term indoor or long-term outdoor uncovered parts, we have the product and solution. Our range of products includes water-based, vapor phase, thixotropic and corrosion inhibitors intended to protect ferrous and nonferrous products. We are driven to continuously develop the latest low VOC thin-film high-performance technologies that

comply with ever more stringent regulations.

Our products were developed for all types of applications such as dipping, brushing, roll, flow-coat, and various spray technologies. Along with our corrosion inhibitor products, Chemtool offers a line of premium rust removers and cleaners to remove coatings and light rust, as well as providing interim protection.

Our customers’ challenges are our next products. Our team of engineers and chemists focus and collaborate with our customers to provide typical and atypical solutions to solve corrosion challenges. The technologies and services we provide are solutions to problems that will improve performance, extend service life, provide process improvements and reduce the overall cost of running your facility.

Chemtool’s Corrosion Inhibitors have played an integral role in

keeping our customers efficient, safe and ahead of the curve

in their manufacturing process.

CORROSION INHIBITORS

I LONGTERM AND OUTDOOR STORAGETransStore Clear RP 8TransStore DTM-KS 10WeRP 10 T 12Kynetx HD CSN26 14Rust Proof Compounds L and H 16

I LONGTERM INDOOR STORAGEEnviro-Armor C-Blue 18Enviro-Armor DHF-3C 20

I MID TO SHORT TERM STORAGEWeRP 6 22CT 2 A 24CT 5 A 26TransStore SCST 30 28Metal Protective Oil L 30

I TRI PURPOSE OILSCT HD Penetrating Oil 32

I VOLATILE CORROSION INHIBITING OILVCI F 34

I SOLUBLE OILSORP 10 B 36

I LIGHT DUTY WATER BASE AND AMINE CARBOXYLATES

CT 1270 C 38RPA 500 40RPAL 600 42RPAM 700 44CT LFRP Extra 46

I RUST STRIPPERSRust RId 48Larzip 30 50ABC 1106 52

I CLEANERSHydrosolv 57 54LAC Additive BA 56

TABLE OF CONTENTS

TYPICAL PROPERTIESPhysical Properties Application Method Coverage Typical Drytime 25°C, 45% rH

Product NameProduct Number CAT Spec Chemistry

Appearance/ Film Type

Dried Film Thickness (Mils) Flash Point

VOC lbs/gal

Weightlbs/gal pH @ 5% Spray Dip Brush/Wipe Sq Ft/Gal. Minutes

LONGTERM AND OUTDOOR STORAGE: ROBUST FILMS FOR OUTDOOR OR INDOOR STORAGE

TransStore Clear RP 5207400000 NA Waterborne acrylic Clear hardshell 2.0 – 3.0 Non-flammable 0.32 8.50 8.5 (neat) Y N N 350 @ 3 mil 45

TransStore DTM-KS 52068K0000 NA Waterborne acrylic Black hardshell 1.5 – 2.5 Non-flammable 0.48 8.83 8.5 (neat) Y Y Y 400 @ 4 mil wet 30

WeRP 10 T 5223T00000 1E 4967A Waterborne wax emulsion Amber grease-like 2.0 – 3.0 Non-flammable

PROTECTION PROPERTIES Salt Fog

ASTM B 117Humidity

ASTM D 1748Cyclic

SAE J 2334Iron Chip Test 1%

ASTM 4627Outdoor Storage

UncoveredOutdoor Storage

CoveredIndoor

Storage

Product Name Product Number Hours Hours Hours Months Months Months Washablity Method Product Description


TransStore Clear RP 5207400000 360 @ 3 mil 1,000 @ 3 mil 2,000 @ 3 mil NA 36 48 72 Moderate until cured

10% Hydrosolv 57, 10% LAC Additive BA

Clear, permanent hard shell coating. Low VOC, water based, direct to metal

TransStore DTM-KS 52068K0000 NA 3,000 @ 2.5 mil 480 @ 2.5 mil NA 36 48 60 Moderate 10% Hydrosolv 57, 10% LAC Additive BA

Intended for Ground Engagement Tools (GET) Market

WeRP 10 T 5223T00000 168 3,000 240 NA 8 10 60 Very good 10% Hydrosolv 57

Kynetx HD CSN26 CSN2605000 4,000 @ 5 mil 3,744 @ 5 mil 2,500 @ 5 mil NA 15 18 60 Moderate Wipe 10% Hydrosolv 57

Alpha 460-RP CSW8601000 1,100 @ 3 mil NA NA NA 3 9 60 Very good Wipe 10% Hydrosolv 57 Thinner version of Kyntx HD CSN26

Rust Proof Compound L 5104000000 1,000 @ 3 mil 2,500 @ 3 mil 1,176 @ 3 mil NA 15 20 60 Moderate Wipe 10% Hydrosolv 57 Flow point: 64°C (147°F) Self healing film Brookfield viscosity @ 40°C - 20,000 cPoise @ 24°C - 30,000 cPoise

Rust Proof Compound H 5104100000 1,000 @ 3 mil 4,000 @ 3 mil 1,512 @ 3 mil NA 20 24 60 Moderate Wipe 10% Hydrosolv 57 Flow Point: 69 °C (157 °F) Self healing film

LONGTERM INDOOR STORAGE

Enviro-Armor C-Blue 50111B0000 1,000 @ 5 mil 2,000 @ 5 mil 500 @ 5 mil NA 1 6 60 Very good Wipe 10% Hydrosolv 57

Enviro-Armor DHF 3-C 5011300000 240 @ 3 mil 1,320 @ 3 mil 420 @ 3 mil NA 1 6 60 Very good Wipe 10% Hydrosolv 57

MID TO SHORT TERM STORAGE (IN-SERVICE)

WeRP 6 5223B00000 NA 600 @ 1 mil NA Pass NA NA 6 Very good 5% Hydrosolv 57

CT 2 A 5000200000 NA 240 @ 1 mil NA NA NA NA 2 Very good 10% Hydrosolv 57

CT 5 A 5100300000 NA 500 @ 1 mil NA NA NA NA 4 Very good 10% Hydrosolv 57 Ferrous Corrosion Inhibitor plus additional aluminum stain protection

TransStore SCST 30 50011C0000 24 @ 2 mil 240 @ 2 mil 8 @ 2 mil NA 2 Weeks 6 months 12 Very good 10% Hydrosolv 57 Weldable rust preventative

Metal Protective Oil L 5004600000 NA 240 @ 2 mil NA NA NR NR 3 Very good 10% Hydrosolv 57

TRI PURPOSE OILS: 3 IN 1 BENEFITS: RUST PROTECTION, LUBRICATES, PENETRATES (LOOSENS FROZEN RUSTED PARTS)

CT HD Penetrating Oil 7802000000 NA 72 @ 0.25 mil NA NA NR NR 0.75 Very good 5% Hydrosolv 57 pH neutralized phosphoric acid

VOLATILE CORROSION INHIBITING OIL

VCI F 8434A00000 3 NA 10 NA NR NR 0.5 Very good 10% Hydrosolv 57

SOLUBLE OIL

SORP 10 B 52061B0000 NA 240 @ 5% NA Pass NR NR 3 Very good Not required

LIGHT DUTY WATER BASE AND AMINE CARBOXYLATES

CT 1270 C 5200600000 NA 150 @ 5% NA Pass NR NR 1.5 (5%) Very good Not required Concentrate, not for yellow metals

RPA 500 5200300000 NA 50 @ 15% NA Pass at 3% NR NR 2.5 (neat) Very good Not required For ferrous metals only

RPAL 600 5201800000 NA 50 @ 15% NA Pass NR NR 9 (15%) Very good Not required For all metals

RPAM 700 52018A0000 NA 50 @ 15% NA Pass NR NR 9 (15%) Very good Not required Intended for engine stands and closed loop systems, good for multi-metal systems with aluminum

CT LFRP Extra 5201000000 NA 24 @ 15% NA Pass NR NR 1 week (15%)

Very good Not required Used for pre-paint operations

RUST STRIPPERS

Rust Rid 4116300000 NA NA NA NA NA NA NA NA For mild corrosion

Larzip 30 4121010000 NA NA NA NA NA NA NA NA For severe corrosion. Spray units only. Applied hot.

ABC 1106 4003200000 NA NA NA NA NA NA NA NA For severe corrosion. Spray units only. Applied hot.

WATER BASED AND HEAVY DUTY RUST PREVENTIVES & RUST STRIPPERS

6 | www.chemtool.com

PROTECTION PROPERTIES Salt Fog

ASTM B 117Humidity

ASTM D 1748Cyclic

SAE J 2334Iron Chip Test 1%

ASTM 4627Outdoor Storage

UncoveredOutdoor Storage

CoveredIndoor

Storage

Product Name Product Number Hours Hours Hours Months Months Months Washablity Method Product Description


TransStore Clear RP 5207400000 360 @ 3 mil 1,000 @ 3 mil 2,000 @ 3 mil NA 36 48 72 Moderate until cured

10% Hydrosolv 57, 10% LAC Additive BA

Clear, permanent hard shell coating. Low VOC, water based, direct to metal

TransStore DTM-KS 52068K0000 NA 3,000 @ 2.5 mil 480 @ 2.5 mil NA 36 48 60 Moderate 10% Hydrosolv 57, 10% LAC Additive BA

Intended for Ground Engagement Tools (GET) Market

WeRP 10 T 5223T00000 168 3,000 240 NA 8 10 60 Very good 10% Hydrosolv 57

Kynetx HD CSN26 CSN2605000 4,000 @ 5 mil 3,744 @ 5 mil 2,500 @ 5 mil NA 15 18 60 Moderate Wipe 10% Hydrosolv 57

Alpha 460-RP CSW8601000 1,100 @ 3 mil NA NA NA 3 9 60 Very good Wipe 10% Hydrosolv 57 Thinner version of Kyntx HD CSN26

Rust Proof Compound L 5104000000 1,000 @ 3 mil 2,500 @ 3 mil 1,176 @ 3 mil NA 15 20 60 Moderate Wipe 10% Hydrosolv 57 Flow point: 64°C (147°F) Self healing film Brookfield viscosity @ 40°C - 20,000 cPoise @ 24°C - 30,000 cPoise

Rust Proof Compound H 5104100000 1,000 @ 3 mil 4,000 @ 3 mil 1,512 @ 3 mil NA 20 24 60 Moderate Wipe 10% Hydrosolv 57 Flow Point: 69 °C (157 °F) Self healing film

LONGTERM INDOOR STORAGE

Enviro-Armor C-Blue 50111B0000 1,000 @ 5 mil 2,000 @ 5 mil 500 @ 5 mil NA 1 6 60 Very good Wipe 10% Hydrosolv 57

Enviro-Armor DHF 3-C 5011300000 240 @ 3 mil 1,320 @ 3 mil 420 @ 3 mil NA 1 6 60 Very good Wipe 10% Hydrosolv 57

MID TO SHORT TERM STORAGE (IN-SERVICE)

WeRP 6 5223B00000 NA 600 @ 1 mil NA Pass NA NA 6 Very good 5% Hydrosolv 57

CT 2 A 5000200000 NA 240 @ 1 mil NA NA NA NA 2 Very good 10% Hydrosolv 57

CT 5 A 5100300000 NA 500 @ 1 mil NA NA NA NA 4 Very good 10% Hydrosolv 57 Ferrous Corrosion Inhibitor plus additional aluminum stain protection

TransStore SCST 30 50011C0000 24 @ 2 mil 240 @ 2 mil 8 @ 2 mil NA 2 Weeks 6 months 12 Very good 10% Hydrosolv 57 Weldable rust preventative

Metal Protective Oil L 5004600000 NA 240 @ 2 mil NA NA NR NR 3 Very good 10% Hydrosolv 57

TRI PURPOSE OILS: 3 IN 1 BENEFITS: RUST PROTECTION, LUBRICATES, PENETRATES (LOOSENS FROZEN RUSTED PARTS)

CT HD Penetrating Oil 7802000000 NA 72 @ 0.25 mil NA NA NR NR 0.75 Very good 5% Hydrosolv 57 pH neutralized phosphoric acid

VOLATILE CORROSION INHIBITING OIL

VCI F 8434A00000 3 NA 10 NA NR NR 0.5 Very good 10% Hydrosolv 57

SOLUBLE OIL

SORP 10 B 52061B0000 NA 240 @ 5% NA Pass NR NR 3 Very good Not required

LIGHT DUTY WATER BASE AND AMINE CARBOXYLATES

CT 1270 C 5200600000 NA 150 @ 5% NA Pass NR NR 1.5 (5%) Very good Not required Concentrate, not for yellow metals

RPA 500 5200300000 NA 50 @ 15% NA Pass at 3% NR NR 2.5 (neat) Very good Not required For ferrous metals only

RPAL 600 5201800000 NA 50 @ 15% NA Pass NR NR 9 (15%) Very good Not required For all metals

RPAM 700 52018A0000 NA 50 @ 15% NA Pass NR NR 9 (15%) Very good Not required Intended for engine stands and closed loop systems, good for multi-metal systems with aluminum

CT LFRP Extra 5201000000 NA 24 @ 15% NA Pass NR NR 1 week (15%)

Very good Not required Used for pre-paint operations

RUST STRIPPERS

Rust Rid 4116300000 NA NA NA NA NA NA NA NA For mild corrosion

Larzip 30 4121010000 NA NA NA NA NA NA NA NA For severe corrosion. Spray units only. Applied hot.

ABC 1106 4003200000 NA NA NA NA NA NA NA NA For severe corrosion. Spray units only. Applied hot.

WATER BASED AND HEAVY DUTY RUST PREVENTIVES & RUST STRIPPERS

www.chemtool.com | 7


PRODUCT DESCRIPTIONTransstore Clear RP is a clear, thin, hard shell rust preventative for steel, aluminum, and cast iron parts. Transstore Clear RP is optimized for spray operations in low-pressure air spray and airless spray units. Transstore Clear RP is a low VOC, air dry, direct-to-metal coating that dries to the touch within 60 minutes. Excellent corrosion protection is obtained with thin coatings of 2-3 mils dry film thickness. The final film is dry, smooth and free of bubbles. Transstore Clear RP is ideal for permanent or semi-permanent rust protection for parts that may be installed or used outdoors. Transstore Clear RP is non-hazardous and non-flammable.

FEATURED BENEFITS• Easy water or mild alkaline cleaner tool clean up

• Environmentally friendly low odor product

• Low VOC

• Does not contain Hazardous Air Pollutants (HAPS): barium, cadmium, chromium, lead, and zinc. Contains components that are generally regarded as safe.

• Excellent adhesion/cohesion of the coating for even coverage

• May be applied using conventional spray systems

TRANSSTORE CLEAR RPHARD SHELL RUST PREVENTATIVE

COMPATIBLE METALSCarbon SteelCast IronTool SteelStainless SteelAluminumOther Non-Ferrous

APPLICATION


TYPICAL PROPERTIES Appearance White to off white liquid

Solubility Water soluble

Weight, 60°F (15.6°C) ~8.5 lbs/gal.

Viscosity (#2 Zahn cup) 40 to 45 seconds

Film Type Clear/firm, non-blocking

Optimal Application Temperature Range 60° to 90°F (16° to 32°C)

Dry Time, 77°F, 25% RH ~45 to 90 minutes

Adhesion ASTM D 3359 5B

Pencil Hardness ASTM 3363 HB

Coating Thickness 2-3 mils

Humidity Testing ASTM D 1748 >1,000 hours

Salt Fog Testing ASTM B 117 360 hours

Average Protection Indoor Up to 6 years

Outdoor (exposed) Up to 3 years

VOC EPA Method 24


PRODUCT DESCRIPTIONTransstore DTM-KS is an air dry, low-VOC, permanent hard shell rust pre-ventative coating specifically designed for use as a Direct-To-Metal (DTM) coating for track and link assemblies, Ground Engaging Tools (GET) and service parts. Transstore DTM-KS uses a novel self-crosslinking resin which requires no primer. Transstore DTM-KS not only provides excellent exterior protection but also enhances the part’s aesthetic appeal. This product contains no Hazardous Air Pollutants (HAPS) and uses components that are generally regarded as safe for greater operator acceptance. This product typically air dries in 30-60 minutes eliminating the need for expensive ovens or infrared heat systems for drying parts. Additionally, dried films can be easily handled before complete cure and cured films are not adversely affected by petroleum lubricants or water.

FEATURED BENEFITS• Easy water or mild alkaline cleaner tool clean up

• Environmentally friendly low odor product

• Low VOC

• Does not contain Hazardous Air Pollutants (HAPS): barium, cadmium, chromium, lead, and zinc. Contains components that are generally regarded as safe

• Excellent adhesion/cohesion of the coating for even coverage

• May be applied using conventional spray systems

TRANSSTORE DTM-KSHARD SHELL BLACK CORROSION INHIBITIVE COATING

APPLICATION

TYPICAL PROPERTIES Fluid Type Viscous, self-crosslinking Direct-To-Metal

Appearance Low-gloss, black fluid

Film Type Firm black, non-blocking

Carrier Type Pure water

Non-Volatile Matter, by weight ASTM D2369 48%

Dry Film Thickness, sprayed, 77°F (25°C) 1.5 – 2.5 mil

Fineness of Grind ASTM D1210 5 Hegman min.

VOC EPA Method 24 0.48 lbs/gal.

Flash Point PMCC Non-flammable

Weight, 77°F (25°C) ASTM D 1475 8.83 lbs/gal.

Coverage, 4 Mil WFT 400 sq ft/gal.

Cure Time, 77°F (25°C), 45% RH 60 minutes

pH, neat 8.5

Gouge Pencil Hardness ASTM D3363 2B minimum

Coating to Substrate Adhesion ASTM D 3359 4 minimum

Viscosity, 40°C #2 Zahn cup Approximately 37 - 42 cSt


PRODUCT APPLICATION / USAGE

Transstore DTM-KS is typically sprayed but can be used by dipping or even brushing. Maximum performance can be achieved only when the metal surfaces are clean, free of rust, oil, grease, ice and mill scale. The metal substrate should be at a temperature of 60° to 90°F (16° to 32°C) at the time of product application.

Do not mix Transstore DTM-KS with solvents. Do not dilute with water. Use product as supplied.

Recommended spray equipment: Low pressure pneumatic, pressure pot, or airless sprayer.

Mix using paint shaker or stir well before using. When spray painting use an even, steady technique to provide an even coating without runs or voids. Allow parts to dry before handling. 24 hour cure may be required on heavier parts to prevent blocking if parts are stacked together. Oven curing is not required.

PROTECTION PROPERTIES Test Dry Film Thickness Cleaned ACT 10160 panels

Cyclic Corrosion Test SAE J2334 2.5 mil (38µ) 20 cycles (480 hours)

Water Fog Test ASTM D 1735 2.5 mil (38µ) 3,000 hours min.

Indoor Warehouse 5 years

Outdoor Exposed 3 years

Outdoor Covered 4 years

TRANSSTORE DTM-KSTECHNICAL DATA

HEALTH AND SAFETYFor health and safety guidance, please refer to the Chemtool SDS (Safety Data Sheets).

PRODUCT CODE52068K0000

PRODUCT STORAGE

• Shelf life is 12 months• Store at temperatures 50° to 95°F (10° to 35°C)• Mild agitation is recommended prior to use. Continued agitation is not required.• KEEP LID ON PRODUCT AFTER USE• DO NOT GET WATER INTO PRODUCT• Do not store product in freezing conditions.

PRODUCT CLEANUP

• Use water and mild alkaline cleaner to remove wet Transstore DTM-KS

• Soak paint gun spray nozzles overnight in a 20% solution of Hydrosolv 57 Product# 840000 to remove build up and overspray.

• To remove fully cured films, add 10% Hydrosolv 57 with 10% LAC Additive BA Product# 420021 at a temperature of 130°F with high impingement.

• Use Tyvek protective clothing when applying since removing cured film from clothing is difficult even when dry cleaning.


PRODUCT DESCRIPTIONWeRP 10T provides the high performance of conventional solvent/oil based rust preventatives without the flash/flame, safety and housekeeping liabilities associated with them. WeRP 10T is a low VOC, non-toxic, lower melt point wax emulsion which deposits a soft greasy amber film when cured. When liquid, the product is nonflammable and can easily be cleaned with detergent and hot water. The thixotropic nature of the product minimizes dripping as well as a uniform film build. When fully cured the grease-like film exhibits excellent high humidity and salt spray protection. As such, WeRP 10T can be used in applying a final preservative coating to production parts for storage or shipment. WeRP 10T is formulated with a multi-metal package to inhibit corrosion on yellow metals and prevents magnetite corrosion due to stacking parts. Optimal coverage is as received in a dip tank, brushed, flow coating or sprayed using an airless spray gun. The lower melt point wax ensures minimal build up and hard crusting at the air liquid interface. The greasy film can be easily removed with a hot 5-10% diluted industrial grade cleaner.

FEATURED BENEFITS• Long term rust protection

• No flash point or fire point liabilities

• Easy cleanup

• Better plant housekeeping

• Multi-metal protection

• Easily cleaned

APPROVALS• CAT 1E 4967A Certified

COMPATIBLE METALSCarbon SteelStainless SteelAluminumCast Iron

TYPICAL APPLICATIONSTubesSteel PlateParts Storage

APPLICATION

WeRP 10T WAX EMULSION RUST PREVENTATIVE


TYPICAL PROPERTIES Fluid Type Wax emulsion rust preventative

Film Type Soft greasy

DFT dipped, 77°F (25°C) 3 mil

Specific Gravity, 60°F (15.6°C) 1.00

Weight, 60°F (15.6°C) 7.9 lbs/gal.

Flash Point (COC) Non-flammable

Viscosity (#2 Zahn cup), 77°F (25°C) 40 seconds

Dry Time, 77°F, 25% RH


KYNETX HD CSN26HEAVY DUTY OBCS GREASE

PRODUCT DESCRIPTIONKYNETX HD CSN26 is a state-of-the-art product which is characterized by exceptional mechanical stability. The very high load carrying ability, excellent resistance to water, oxidation and corrosion, and outstanding performance in a wide temperature range, make it a high performance premium grease. It contains no heavy metals or other harmful or environmentally undesirable ad-ditives, such as phosphorus, chlorine, zinc, phenols, antimony, barium or lead.

FEATURED BENEFITS• Outstanding extreme pressure and anti-wear properties

• Superior rust and corrosion protection

• Strongest resistance to water washout

• Excellent thermal stability at high temperatures

• Excellent shear stability

• Contains no heavy metals

APPROVALS• CAT 1E 4967Y Certified

FOR USE IN/ON:Marine equipment

Heavy mobile equipment

Cables exposed to saltwater

Paper machine (wet and dry end bearings)

Slab mills/steel mills roller bearings

Centralized lube systems/auto lube service shops

APPLICATION

TYPICAL PROPERTIES Thickener Type OBCS

ISO VG 220

NLGI Grade 2

Color Tan

Texture Buttery

Appearance Smooth

Operating Temperature Range -20° to 350°F (-29° to 177°C)


KYNETX HD CSN26TECHNICAL DATA

TYPICAL PROPERTIES Penetration, 77°F (25°C), mm/10 ASTM D 217

Worked 60 Strokes 265 – 295

Worked 10,000 Strokes, change from 60 strokes -1

Worked 100,000 Stokes, change from 60 strokes +2

Dropping Point ASTM D 2265 572°F (300°C)

Oil Separation, 24 hours @ 77°F (25°C) ASTM D 1742 0.17

Four Ball EP, Weld Point ASTM D 2596 500

Four Ball EP, LWI ASTM D 2596 65

Four Ball Wear, Scar diameter ASTM D 2266 0.39 mm

Timken OK Load ASTM D 2509 65 lbs.

Water Washout, 175°F (79°C), loss ASTM D 1264 1.75%

Corrosion Protection ASTM D 1743 Pass

Salt Fog Test ASTM B 117 4,000 hours

Roll Stability, Pen ASTM D 1831 +19

Pressure Vessel Oxidation ASTM D 942

Psi pressure drop, 100 hours 0

Psi pressure drop, 500 hours 2

Psi pressure drop, 1,000 hours 9

Wheel Bearing Leakage, modified, 325°F (163°C) ASTM D 1263 0.40 grams

Mobility of Grease U.S. Steel Method, 40°F (4.4°C) LT-37 133.1 grams/minute

NOTES

When changing from one grease product to another, it is recommended that the incumbent grease is completely purged from the application. The replacement grease should then be used to flush the application. Reduce the re-lubrication interval by half for the next 3-4 cycles to ensure removal of the incumbent grease. This should be done regardless of compatibility or incompatibility.


PRODUCT CODECSN26050000


FOR USE IN/ON:Iron and steel exposed to atmospheric conditions before, during, and after manufacturinginto finished parts

Undercoating of vehicles

Wire rope lubricants/rust preventatives

Transformer casings

Bridges and floating bridge pontoons

Non-food storage vessels

Non-potable water tanks

Ballast tanks

Gas holders

Hoisting equipment

Farm implements

APPLICATION

RUST PROOF COMPOUNDS L AND HTRANSIT / HEAVY DUTY RUST PREVENTIVES

PRODUCT DESCRIPTIONRust Proof Compounds are soft film rust preventives designed for relatively long-term protection of both iron and steel. Rust proof compounds are formulated from high melting point petrolatum and a special rust inhibitor system with penetrating and water displacing capabilities.

FEATURED BENEFITS• Excellent long-term rust protection—Petrolatum and special additive sys-

tem form a nonhardening, self-sealing film to protect surfaces against the elements. Good water displacing capabilities ensure that the protective film is also waterproof. The special rust inhibitor system ensures maximum protection against corrosive attack. Good penetrating characteristics ensure difficult-to-reach seams and crevices receive effective corrosion protection.

• Minimum surface preparation required—The ability to penetrate existing flaky or heavy rust means that little or no preliminary cleaning of metal surfaces is required before application. This penetrating ability makes existing rust easier to remove should it be considered desirable to do so for a better or more economical job.

• Minimal cost—Self-sealing properties of the protective film minimize the need for touch-ups when film damage occurs through scratches or brush marks. The overall cost of this soft film rust protection is much less than ordinary paint.

• Easy removal—Soft protective film is readily soluble in petroleum solvent, mineral spirits, or kerosene to enable easy removal when required.


TYPICAL PROPERTIES Rust Proof Compound L Rust Proof Compound H

Appearance Dark amber Dark amber

Film Type Gel Stiff semi-solid

Chemistry Self healing thixotropic solvent cutback hotmelt

Self healing thixotropic hotmelt

Percent Non-volatile Materials 80.0% 99.8%

Flow Point 147°F (64°C) 157°F (69°C)

Typical Dried Film Thickness 1.0 - 5.0 mils 1.0 - 5.0 mils

Typical Dried Film Thickness, microns 24.4 - 127.0 24.4 - 127.0

Flash Point (PMCC) 125°F (51°C) 435°F (224°C)

Brookfield Viscosity, 77°F (25°C), Spindle 6 rpm 30,000 NA

Brookfield Viscosity, 100°F (40°C), 10 rpm, cP 20,000 NA

VOC, lbs/gal. 1.43 0.05

Application Temperature

Spray 100° to 130°F (38° to 54°C) 130° to 150°F (54° to 66°C)

Dip Not recommended 150° to 175°F (66° to 79°C)

Brush/Wipe 77° to 100°F (25° to 38°C) ≥80°F (27°C)

Coverage, 3 mils applied thickness 300 sq ft/gal. 280 sq ft/gal.

Dry Time, , 45% rh Immediate Immediate

Salt Fog Test, 3 mils DFT, ASTM B 117 A 1,000 hours 1,000 hours

Humidity, 3 mils DFT, ASTM D 1748 A 2,500 hours 4,000 hours

Cyclic Corrosion Cabinet, 3 mils DFT, SAE J 2334 A

1,176 hours 1,512 hours

Outdoor Storage, 3 mils DFT, Uncovered A 15 months 20 months

Outdoor Storage, 3 mils DFT, Covered A 20 months 24 months

Indoor Storage, 3 mils DFT A 60 months 60 months

Cleanablity Method Wipe off, use hot alkaline cleaner soak or use high impingement B

A Data on 20 Ra (smooth) 1010 carbon steel panels. B Recommend using 5 - 10% Hydrosolv 57 840000 at 140° to 160°F (60° to 71°C).

SURFACE PREPARATION, APPLICATION AND SHELF LIFE

Maximum performance of Rust Proof Compounds L and H can be achieved when the metal surfaces are clean, free of rust, water, ice and mill scale. The metal substrate should be at a temperature of 50° to 95°F (10° to 35°C) at the time of product application.

Rust Proof Compounds L and H are formulated to be used as-supplied. The product can be thinned with an aliphatic solvent, however, be advised that doing so will reduce film build and as such will reduce the protective property performance. We advise contacting Chemtool before thinning the product. Ensure uniform consistancy before use.

Shelf life for both products is 2 years, if products are hermetically sealed. Immediately seal Rust Proof Compounds L after use to prevent solvent evaporation.

RUST PROOF COMPOUNDS L AND HTECHNICAL DATA


PRODUCT CODE

Rust Proof Compound L 5104000000 Rust Proof Compound H 5104100000


ENVIRO-ARMOR C-BLUE THIXOTROPIC RUST PREVENTIVE COATING

COMPATIBLE METALSCarbon SteelStainless SteelCast Iron Aluminum

TYPICAL APPLICATIONSMachined PartsSteel PlateParts Storage

APPLICATION PRODUCT DESCRIPTIONEnviro-Armor C-Blue is a petroleum based, thixotropic rust preventive coating which provides excellent protection of parts in harsh environments. The thixotropic chemistry provides a fluid consistency during agitation, which allows for easier application and transitions through a self-healing phase to form a set coating on the newly protected part. Enviro-Armor C-Blue is truly an excellent rust preventive coating for long-term protection against corrosion. It is formulated with very low VOC content and no HAPs for compliance with tight emissions regulations.

FEATURED BENEFITS• Long term indoor and covered outdoor protection against rust and corrosion for ferrous and non-ferrous parts in wet, corrosive or acidic environments

• Thixotropic properties allow for application by spray methods when agitated, with little or no dripping after applied to the part

• Blue color for easy identification

• Easily removed in hot, alkaline wash

• High flash point for safe application

• Low odor, non-irritating formulation for good operator acceptance

• Excellent long term protection in salt spray environments

• Barium free formula

• Lubricating characteristics

APPROVALS• CAT 1E 4973 Long Term Corrosion Inhibitor Certified (Up to 5 years indoor warehouse storage)

• Super-compliant for California SCAQMD Rule 1144


TYPICAL PROPERTIES Fluid Type Oil based

Appearance Blue thixotropic gel

Film Type Blue greasy film



Flash Point (ASTM D93) >350°F (>177°C )

Brookfield Viscosity Unworked cPs Spindle 6 10 RPM @ 77°F

Typical 15,000 – 50,000

Brookfield Viscosity Worked cPs Spindle 6 10 RPM @ 77°F (25°C)

Typical 3,000 – 14,000

VOC (EPA Method 24)


ENVIRO-ARMOR DHF-3C CORROSION INHIBITIVE COATING

COMPATIBLE METALSCarbon SteelStainless SteelCast Iron Aluminum

TYPICAL APPLICATIONSMachined PartsSteel PlateParts Storage

APPLICATION PRODUCT DESCRIPTIONEnviro-Armor DHF-3C is a high flash point, oil based, ready to use, short to long-term rust preventive / corrosion inhibitor designed to provide a translu-cent, dry, durable coating. Enviro-Armor DHF-3C provides long term indoor storage protection and short to long-term outdoor protection on sheet steel and other ferrous parts. The coating is extremely durable and resilient in a variety of harsh environments and can withstand unprotected, outdoor envi-ronments (rain impingement) for storage of parts. This product dries in 24 to 48 hours (depending on application environment) and can be handled prior to complete cure. Enviro-Armor DHF-3C is safe to use.

FEATURED BENEFITS• Long term indoor and covered outdoor protection against rust and corrosion for ferrous and nonferrous parts in wet, corrosive or acidic environments

• Oily film can be sprayed, dipped or flow coated

• Easily removed in hot alkaline wash

• High flash point for safe application

• Low odor, non-irritating formulation for good operator acceptance

• Excellent long term protection in salt spray environments

• Barium free formula

• Lubricating characteristics

APPROVALS• CAT 1E 4973 Certified - Long Term Indoor Storage RP (Up to 5 years indoor warehouse storage)

• Compliant for California 8CAQMD rule 1144


TYPICAL PROPERTIES Appearance Dark liquid

Film Type Translucent, dry to touch



Film Thickness 1.0 – 5.0 mil

Flash Point (ASTM D93) >140°F (60°C)

Dry Time, 77°F (25°C), 50% RH ~24-48 hours

VOC


WeRP 6WATER EMULSION RUST PREVENTATIVEENVIRONMENTALLY FRIENDLY ALKALINE SPRAY CLEANER

APPLICATION PRODUCT DESCRIPTIONWeRP 6 provides the high performance of conventional solvent/oil based rust preventatives without the flash/flame, safety, or housekeeping liabilities associated with them. WeRP 6 is a 10% solids, low VOC, non-toxic synthetic surfactant blend that deposits an ultra-thin uniform film when cured. The product is non-flammable and can easily be cleaned with detergent and hot water. The product is as thin as a solvent, yet it contains no solvent or mineral oils and is readily biodegradable. When fully cured, the thin film exhibits excellent high humidity protection. WeRP 6 is formulated with a multi-metal package to inhibit corrosion on yellow metals and to prevent magnetite corrosion due to stacking parts. Optimal coverage is as received in a dip tank, flow coating, or when brushed or sprayed using an airless or pneumatic spray gun. WeRP 6 is formulated with an optimal blend of preservatives to extend shelf life. WeRP 6 is an excellent choice for the last stage of a washer, as it will help disperse dirt while coating the parts with a near-imperceptible film. In many instances the product is paintable as in the benchmarking study done below.

FEATURED BENEFITS• Parts can be welded with no defects

• Thin film is non-hazardous and poses no flash or fire hazard during welding

• Extremely low foaming characteristics ideal for high pressure washers

• Contains a preservative for maximum sump life yet is biodegradable

• Imperceptible thin film corrosion preventative offers superior rust protection and weldable surface

• Lean concentrations assure low consumption and cost effectiveness

• High detergency/surfactant package providing added cleaning power beyond alkalinity

• Contains no phosphates, nitrites, or silicones

APPROVALS• CAT 1E 4971 Indoor Storage Corrosion Inhibitor Certified



TYPICAL PROPERTIES Fluid Type Alkaline spray cleaner

Appearance Creamy colored emulsion

Odor Mild amine

Film Type Non-sticky, near imperceptible

DFT dipped, 77°F (25°C)


APPLICATION

COMPATIBLE METALSCast IronCarbon SteelTool SteelStainless SteelAluminumBronzeCopperBrass

PRODUCT DESCRIPTIONCT 2 A is a solvent based water displacing barium free rust preventive specially formulated to leave a light imperceptible residual film. CT 2 A will displace free standing water and provides short to medium term indoor protection.

FEATURED BENEFITS• Thin film non discernible coating

• Low odor based solvent for worker health and safety

• Barium free

• Low residues for clean packaging, handling, and post machining processes

TYPICAL PROPERTIES Fluid Type Solvent based

Appearance Clear Amber liquid



Viscosity, 40°C 2.6 cSt

Pour Point 20°F (-6.7°C)

Flash Point 180°F (82.2°C)

VOC, ASTM E 1868 317.4 grams/liter

PROTECTION PROPERTIES

Test Dry Film Thickness20 Ra (Smooth)

1010 Carbon Steel Panels

Humidity ASTM D 1748 1 Mil (25µ) 240 hours

Indoor Warehouse 1 Mil (25µ) 2 months

CT 2 A SOLVENT OIL BASED RUST PREVENTIVE


CT 2 ATECHNICAL DATA


PRODUCT CODE5000200000


CT 2 A is designed primarily for indoor protection only.

CT 2 A may be applied by brushing, spraying, or dipping. Maximum performance of CT 2 A can be achieved only when the metal surfaces are clean, free of rust, water, ice and mill scale. The metal substrate should be at a temperature of 50° to 95°F (10° to 35°C) at the time of product application. CT 2 A is formulated to be used as supplied. DO NOT THIN CT 2 A. Incorrect thinning will compromise film build, dry time, and coverage. Ensure uniform consistency prior to use.

Where water displacement is of primary importance, the dip tank should be equipped with a bottom drain for removing accumu-lated water. A false bottom tank is desireable to prevent parts from being dipped through rust preventative into water layer below.

DO NOT HERMETICALLY SEAL BAGS IF BAGGING PARTS.

RECOMMENDED SPRAY EQUIPMENT: CT 2 A is a ready to use product. The viscosity is low enough to be easily sprayed using a pneumatic spray gun/body shutz gun or pressure pot. Airless spray equipment is not required but can be used if other methods are not available.

PRODUCT CLEANUP

It is recommended to use 5 -10% hot (140° to 160°F) alkaline cleaner such as Hydrosolv 57, Product number: 840000 with low to moderate impingement. Dry cleaning can remove CT 2 A from fabrics.

PRODUCT STORAGE

• Shelf life is 24 months• Store CT 2 A at temperatures 50° to 95°F (10° to 35°C)• Mild agitation is recommended prior to use. Continued agitation is not required.• KEEP LID ON PRODUCT AFTER USE• DO NOT GET WATER INTO PRODUCT


TYPICAL PROPERTIES Fluid Type Oil based rust preventative

Appearance Clear brown liquid

Odor Mild petroleum



VOC, ASTM E 1868 333.0 grams/liter

Viscosity, 100°F 35 SUS

Flash Point, PMCC 160°F (71°C)

Sulfated Ash 0.12 – 0.17%

Humidity Cabinet Corrosion, ASTM D 1748 Sandblasted panels – 500 hours Polished panels – 90 hours

CT 5 ASOLVENT OIL BASED RUST PREVENTATIVE

PRODUCT DESCRIPTIONCT 5 A is an oil dispersed, non-staining rust preventative designed to deposit a light oily film which provides indoor protection on sheet steel and other ferrous parts. The CT 5 A will neutralize fingerprints and provides excellent water displacing characteristics while preventing the formation of black stains when parts are stored in contact with each other.

FEATURED BENEFITS• Low odor based solvent for worker health and safety

• Barium free

• Low residues for clean package and handling and post-machining processes

• Excellent for in-process rust protection

APPROVALS• CAT 1E 4971 Indoor Storage Corrosion Inhibitor Certified

APPLICATION

PROTECTION PROPERTIES Test Method Dry Film Thickness 20 Ra (Smooth) 1010 Carbon Steel Panels




CT 5 ATECHNICAL DATA



PRODUCT APPLICATION

CT 5 A is designed primarily for indoor protection only.

CT 5 A may be applied by brushing, spraying, or dipping. Maximum performance of CT 5 A can be achieved only when the metal surfaces are clean, free of rust, water, ice and mill scale. The metal substrate should be at a temperature of 50° to 95°F (10° to 35°C) at the time of product application. CT 5 A is formulated to be used as supplied. DO NOT THIN CT 5 A. Incorrect thinning will com-promise film build, dry time, and coverage. Ensure uniform consistency prior to use.

Normally a single tank is adequate for dipping operations, however, if parts are extremely wet or dirty and where carry-over is great, a two-tank system will produce the best results. Where water displacement is of primary importance, the dip tank should be equipped with a bottom drain for removing accumulated water. A false bottom tank is desirable to prevent parts from being dipped through rust preventative into water layer below.


RECOMMENDED SPRAY EQUIPMENT: CT 5 A is a ready to use product. The viscosity is low enough to be easily sprayed using a pneumatic spray gun/body shutz gun or pressure pot. Airless spray equipment is not required but can be used if other methods are not available.

PRODUCT CLEANUP

It is recommended to use 5 -10% hot (140° to 160°F) alkaline cleaner such as Hydrosolv 57, Product number: 840000 with low to moderate impingement. Dry cleaning can remove CT 5 A from fabrics.

PRODUCT STORAGE

• Shelf life is 24 months• Store CT 5 A at temperatures 50° to 95°F (10° to 35°C)• Mild agitation is recommended prior to use. Continued agitation is not required.• KEEP LID ON PRODUCT AFTER USE• DO NOT GET WATER INTO PRODUCT


APPLICATION

COMPATIBLE METALSCarbon SteelStainless SteelCast IronCopper Aluminum

TYPICAL APPLICATIONSMachined PartsEnginesForged Hot PartsSteel PlateParts Storage

TRANSSTORE SCST 30 CORROSION INHIBITIVE COATING

PRODUCT DESCRIPTIONTransStore SCST 30 is a high flash point solvent type rust preventive/corrosion inhibitor designed to provide a translucent, dry, durable coating. TransStore SCST 30 provides long term indoor storage protection and short to long-term outdoor protection on sheet steel and other ferrous parts. The coating is extremely durable and resilient in a variety of harsh environments and can withstand unprotected, outdoor environments (rain impingement) for storage of parts. This product cures completely in 24 to 48 hours (depending on application environment) and can be handled prior to complete cure.

FEATURED BENEFITS• Excellent humidity protection

• Low VOC

• Non flammable

• Multi-metal protection

• Easily cleaned

• Thin film

• Excellent shelf life

• Easy clean up

• Non-hazardous

• Contains no heavy metals, phosphates, nitrites, or silicones

APPROVALS• Satifies CAT IE 4969 Weldable Rust Preventative Specification

• Satisfies CAT MS 2260 High Flash Oil Rust Preventative Specification


Test Method Dry Film Thickness20 Ra (Smooth)


Humidity ASTM D 1748 2 mils (50 microns) 240 hours

Water Fog ASTM D 1735 2 mils (50 microns) 72 hours

Salt Fog ASTM B 117 2 mils (50 microns) 24 hours

Cyclic SAE J 2334 2 mils (50 microns) 8 hours

Indoor Warehouse 2 mils (50 microns) 1 year

Outdoor Covered 2 mils (50 microns) 6 months

Outdoor Uncovered 2 mils (50 microns) 2 weeks


PRODUCT STORAGE

• Shelf life is 24 months• Store TransStore SCST 30 at temperatures from 50° to 95°F (10° to 35°C)• Mild agitation is recommended prior to use. Continued agitation is generally not required.• KEEP LID ON PRODUCT AFTER USE• DO NOT GET WATER INTO PRODUCT

TRANSSTORE SCST 30TECHNICAL DATA


PRODUCT CODE50011C0000


TransStore SCST 30 is designed primarily for indoor or short-term outdoor protection only.

TransStore SCST 30 may be applied by brushing, spraying, or dipping. Maximum performance of TransStore SCST 30 can be achieved only when the metal surfaces are clean, free of rust, oil, and mill scale. The metal substrate should be at a temperature of 50° to 95°F (10° to 35°C) at the time of product application. TransStore SCST 30 is formulated to be used as supplied. DO NOT THIN TransStore SCST 30. Incorrect thinning will compromise film build, dry time, and coverage. Ensure uniform consistency prior to use.


RECOMMENDED SPRAY EQUIPMENT: TransStore SCST 30 is a ready to use product. The viscosity is low enough to be easily sprayed using a hand held pump aerosol spray bottle, pressure pot, or pneumatic spray gun/ body shutz gun. Airless spray equipment is not required but can be used if other methods are not available.

TYPICAL PROPERTIES Fluid Type Solvent based

Appearance Clear Clear dark liquid

Coverage, 2 mils 400 – 450 ft2/gal

Coverage, 50 microns 9.8 – 11m2/l

Film type Oily translucent

DFT dipped, 77°F (25°C) 2 mils (50 microns)


Weight, 77°F (25°C) 7.35 lbs/gal.


Carrier Type High Flash Aliphatic Solvent

Viscosity, #2 Zahn cup, 77°F (25°C) 65 seconds

Non-Volatile Content, by weight 95%

Cure Time, 77°F (25°C), 25% RH 24 hours

VOC, ASTM 1868


TYPICAL PROPERTIES Fluid Type Oil based rust inhibitor

Appearance Clear amber liquid

Film Type Oily translucent

Dry Film Thickness, Dipped, 77°F (25°C) 1 mil (25µ)


VOC, EPA Method 24 0.56 lbs/gal.


Coverage, 2 Mil WFT 550 sq ft/gal.

Cure Time, 77°F (25°C), 45% RH Immediate

Viscosity, 40°C 18 cSt






METAL PROTECTIVE OIL LCORROSION INHIBITIVE COATING

APPLICATION PRODUCT DESCRIPTIONMetal Protective Oil L is a barium-free corrosion inhibiting fluid providing a low viscosity light oily film for long term storage solutions.

FEATURED BENEFITS• Provides short-term protection for acid, salt, and high humidity conditions• High flash point• No heavy metals, pleasant odor, safe handling• Can be used as a light duty lubricant

APPROVALS• CAT IE 4971 Certified - Short-Term Indoor Storage COMPATIBLE METALS

Carbon SteelStainless SteelCast IronCopper Aluminum

TYPICAL APPLICATIONSMachined PartsEnginesForged Hot PartsSteel PlateParts Storage


PRODUCT APPLICATION

Metal Protective Oil L is designed primarily for indoor protection only.

Metal Protective Oil L may be applied by brushing, spraying, or dipping. Maximum performance of Metal Protective Oil L can be achieved only when the metal surfaces are clean, free of rust, water, ice and mill scale. The metal substrate should be at a tem-perature of 50° to 95°F (10° to 35°C) at the time of product application. Metal Protective Oil L is formulated to be used as supplied. DO NOT THIN Metal Protective Oil L. Incorrect thinning will compromise film build, dry time, and coverage. Ensure uniform consis-tency prior to use.

Normally a single tank is adequate for dipping operations, however, if parts are extremely wet or dirty and where carry-over is great, a two-tank system will produce the best results. Where water displacement is of primary importance, the dip tank should be equipped with a bottom drain for removing accumulated water. A false bottom tank is desirable to prevent parts from being dipped through rust preventative into water layer below.


RECOMMENDED SPRAY EQUIPMENT: Metal Protective Oil L is a ready to use product. The viscosity is low enough to be easily sprayed using a pneumatic spray gun/body shutz gun or pressure pot. Airless spray equipment is not required but can be used if other methods are not available.

METAL PROTECTIVE OIL L TECHNICAL DATA



PRODUCT STORAGE• Shelf life is 24 months• Store at temperatures 50° to 95°F (10° to 35°C)• Mild agitation is recommended prior to use. Continued agitation is not required.• KEEP LID ON PRODUCT AFTER USE• DO NOT GET WATER INTO PRODUCT

PRODUCT CLEANUPIt is recommended to use 5 – 10% hot (140° to 160°F) alkaline cleaner such as Hydrosolv 57, Product # 840000 with low to moderate impingement. Dry cleaning can remove Metal Pro-tective Oil L from fabrics.


APPLICATION

TYPICAL PROPERTIES Fluid Type Oil based rust inhibitor

Appearance Clear yellow liquid

Film Type Thin film, translucent

DFT Dipped, 77°F (25°C) 0.25 mil (6µ)

Kinematic Viscosity, 40°C 1.0 cSt

VOC, EPA Method 24 4.20 lbs/gal.



Coverage, 0.25 Mil WFT 1,500 sq ft/gal.

Cure Time, 77°F (25°C), 45% RH Immediate




Humidity ASTM D 1748 0.25 Mil (6µ) 72 hours

Indoor Warehouse 0.25 Mil (6µ) 3 weeks

CT HD PENETRATING OILMULTIPURPOSE LUBRICATING AND RUST PROOFING OIL

PRODUCT DESCRIPTIONCT HD Penetrating Oil lubricates, penetrates frozen rusted bolts, displaces water and provides good short-term rust protection. CT HD Penetrating Oil is compatible with various elastomers and will not harm hard surfaces.

FEATURED BENEFITS• No heavy metals, pleasant odor, safe handling

• Can be used as a light duty lubricant

• All in one product makes it ideal for shop maintenance boxes

• Multi-metal compatible


PRODUCT APPLICATION

CT HD Penetrating Oil is designed primarily for indoor protection only.

CT HD Penetrating Oil is formulated to be used as supplied. DO NOT THIN CT HD Penetrating Oil. Incorrect thinning will compro-mise film build, dry time, and coverage. Ensure uniform consistency prior to use.d as a spray, however may be easily applied using other methods such as brushing, or dipping.

Used as a corrosion inhibitor maximum performance of CT HD Penetrating Oil can be achieved only when the metal surfaces are clean, free of rust, water, ice and mill scale. The metal substrate should be at a temperature of 50° to 95°F (10° to 35°C) at the time of product application.

Normally a single tank is adequate for dipping operations, however, if parts are extremely wet or dirty and where carry- over is great, a two-tank system will produce the best results. Where water displacement is of primary importance, the dip tank should be equipped with a bottom drain for removing accumulated water. A false bottom tank is desirable to prevent parts from being dipped through rust preventative into water layer below.


RECOMMENDED SPRAY EQUIPMENT: CT HD Penetrating Oil is a ready to use product. The viscosity is low enough to be easily sprayed using a spray bottle or pneumatic spray gun.

CT HD PENETRATING OIL TECHNICAL DATA



PRODUCT STORAGE

• Shelf life is 24 months• Store at temperatures 50° to 95°F (10° to 35°C)• Mild agitation is recommended prior to use. Continued agitation is not required.• KEEP LID ON PRODUCT AFTER USE• DO NOT GET WATER INTO PRODUCT

PRODUCT CLEANUP

It is recommended to use 5-10% hot (140° to 160°F) alkaline cleaner such as Hydrosolv 57, Product no.: 840000 with low to moderate impingement. Dry cleaning can remove CT HD Penetrating Oil from fabrics.


PRODUCT DESCRIPTIONVCI-F Oil is a vapor phase corrosion inhibitor and flushing fluid, which should be used to protect internal tanks from corrosion, flush tanks to disperse debris and offer protection for the external surfaces of parts. It contains less than 15 ppm sulfur and is compatible with fuel, lubricating and hydraulic oils. VCI-F Oil con-tains a special low pour point synthetic ester contact inhibitor blend, which will not varnish, harden or react with cleaner residues left in systems. The volatile corrosion inhibitor blend will protect the head space in “closed systems” such as: engines, transmissions, hydraulic tanks and cylinders, gear housings, fuel tanks and steel drums. The duration of the vapor phase protection provided depends on how well the tank is sealed. Protection for several years can be achieved if the tank is hermetically sealed or bagged with LDPE (>0.125mm thick) plastic and sealed. For incompletely sealed systems periodic endoscope inspection and possible re-application may be required.

FEATURED BENEFITS• VCI-F Oil is often used to protect sheet metal stampings, spare parts, etc. if sealed in >0.125mm LDPE bags.

• VCI-F Oil is distinguishable from conventional preservative oils as it gives both vapor phase and contact corrosion protection.

• VCI-F Oil is particularly effective in fuel tanks, hydraulic tanks and ferrous components while in transit or in temporary storage. VCI-F Oil is designed to lift, displace and encapsulate adsorbed water and washer residue from the surface to protect the tank from corrosion and staining.

APPROVALS• Certified CAT 1E 2359 Corrosion Preventative VCI Oil


COMPATIBLE METALS Cast IronCarbon SteelTool SteelStainless SteelAluminumBronzeCopperBrassMagnesiumZinc

TYPICAL USESFuel TanksEnginesHydraulic Tanks & CylindersGear HousingsSteel Drums

APPLICATION

VCI F OIL VAPOR PHASE CORROSION INHIBITOR


TYPICAL PROPERTIES Fluid Type Oil based

Appearance Clear liquid

Odor Mild amine



Flash Point (COC) 385°F (196°C)



Viscosity Index 34

Pour Point -67°F (-55°C)

VOC 70 grams/liter

DIRECTIONS FOR USE

Adequate protection is achieved at 0.2 to 0.8% volume of VCI-F liquid/volume of internal tank space. The tank should be as dry as possible before the addition of VCI-F Oil. To ensure optimal protection, it is preferred that the oil is fogged into the tank using a 360° pole gun atomizer or wand. After application, if possible, the tank should be rotated 360° from both axes for maximum wetting with at least 10 microns of oil film thickness per square centimeter. This is especially critical in the top portion of the inside of the tank since the top portion of the tank is the most critical area. Be aware of baffles within the tank which may inhibit ade-quate coverage. Using an endoscope to confirm that coverage of VCI-F Oil in the tank is adequate is a way to minimize potential corrosion issues. After coverage, the fuel can be added.

TOXICITYVCI-F Oil is composed of highly refined petroleum distillate and a non-toxic synthetic ester blend. The product contains a relatively small amount of a volatile substance which may be irritating to eyes, skin and mucous membranes. Prolonged exposure to the vapors should be avoided. Consult the SDS for more details.

STABILITYVCI-F Oil is unaffected by ambient temperatures and remains stable (and effective) indefinitely as long as kept indoors in a vapor-tight container. The material should always be placed in a closed container to minimize escape of the Volatile Corrosion Inhibitor.

EFFECT ON NON-METALLIC MATERIALSVCI-F Oil has little to no effect on rubber, painted surfaces, or plastics. Should a question arise, however, because of the wide variance in the composition of these materials, immerse the specimen in a container of VCI-F Oil and maintain at 130°F (55°C) in an oven for 72 hours. Examine the specimen for visible signs of change.

VCI F OILTECHNICAL DATA


PRODUCT CODE8434A00000


APPLICATION

SORP 10 B SOLUBLE OIL RUST PREVENTIVE LIQUID ALKALINE SPRAY CLEANER

PRODUCT DESCRIPTIONSORP 10 B is a low foaming soluble oil corrosion inhibitor. Run at a concen-tration as high as 10% its protective film is near non discernable. Sorp 10 B has no volatile solvents and contains components which prevent biological growth (bacteria, yeast, fungus) for a long sump life with little to no mainte-nance. Sorp 10 B offers better corrosion protection than traditional synthetic amine carboxglates.

FEATURED BENEFITS• Extremely low foaming characteristics ideal for high pressure washers

• Contains additives to prevent biological growth for extended sump life


• Exceptional hard water stability keeps washers clean and maintenance free

• Lean concentrations ensure low consumption and cost effectiveness


• Contains no phosphates, nitrites, or silicones

APPROVALS• Compliant for California SCAQMD Rule 1144

COMPATIBLE METALSCast IronCarbon SteelTool SteelStainless SteelAluminumBronzeCopperBrass


SORP 10 BTECHNICAL DATA


PRODUCT CODE52061B0000

TYPICAL PROPERTIES Fluid Type Water based/soluable oil

Appearance Straw colored liquid

Odor Mild



pH (5% dilution) 9.0

Foaming Tendency None

VOC, ASTM 1868 61.0 grams/liter

MIXING DATA

Always add water first, turn mixer or recirculating pump on then slowly add oil into vortex. Do not add oil first and then water this will cause inversion and clumping. Product concentration is best monitored by refractometer.

Concentration 10% 6% 5% 4% 3%

Refractometer Reading (factor = 1.0) 10 6 5 4 3

PRODUCT APPLICATION / USAGEOperation Temperature Cast Iron, Ferrous Alloys Aluminum Alloys

Spray Washer 100° – 120°F (38° to 49°C) 4 – 6% 5 – 7%

Immersion Tank/Agi-Lift 100° – 120°F (38° to 49°C) 5 – 6% 5 – 7%


APPLICATION PRODUCT DESCRIPTIONCT 1270 C is an 80% solids synthetic aqueous amine-carboxylate corrosion inhibitor which can be diluted to tailor the protection required in metalworking operations. CT 1270 C is recommended for applications requiring short term indoor protection. CT 1270 C is buffered for lower pH ranges, does not contain dicyclohexylamine (DCHA), diethanolamine (DEA) or nitrites and is compounded with raw materials generally considered as safe for greater operator acceptance. CT 1270 C is low foaming and has a break point as low as 1% in pure water when running ASTM 4627-12 cast iron chip test. The product is compounded with a sequestrant to allow prevention of flocculation up to 400 ppm hardness.

It is completely soluble in water and may be used as an in-process rust preventative or added to dilutions on synthetic, semi-synthetic, and soluble oil metalworking fluids. CT 1270 C forms a soft, non-tacky near imperceptible film on machine parts for excellent corrosion protection without forming a sticky residue. CT 1270 C can be used for aluminum and zinc, however, should not be used for copper containing metals such as bronze or brass.

FEATURED BENEFITS• Non-flammable, easy clean up

• Biodegradeable

• Low to no foaming characteristics ideal for high pressure washers

• Contains a sequestrant for added hard water stability


• Dispersant qualities keeps washers clean and free of maintenance

• Contains no phosphates, nitrites, silicones, DEA or DCHA

• Freeze-thaw stable

• Will not leave heavy tacky residues typicallty associated with traditional water based RPs

CT 1270 CCONCENTRATED AQUEOUS SYNTHETIC CORROSION INHIBITOR


TYPICAL PROPERTIES Fluid Type Amine Carboxylate

Appearance Clear, yellow liquid

Film Type Imperceptible

Carrier Type Pure water

Dry Film Thickness, Dipped, 5% dilution, 77°F (25°C)

0.2 mil (5µ)

VOC EPA Method 24 0.22 lbs/gal.

Flash Point PMCC Non-flammable

Weight, 77°F (25°C) ASTM D 1475 9.04 lbs/gal.

Coverage, 0.5 Mil WFT, 5% o/w 4,000 sq ft/gal.

Cure Time, 77°F (25°C), 45% RH 60 minutes

pH, 5% dilution 7.6

MIXING DATA

Tap or well water can be used but ensure that chlorides


RPA 500AQUEOUS BASED SYNTHETIC CORROSION PREVENTATIVE

APPLICATION PRODUCT DESCRIPTIONRPA 500 is a water dilutable corrosion inhibitor based on the select volatility of amine chemistries. RPA 500 is recommended for applications that require short-term (1-3 months) to long term (12-16 months) indoor protection of cast iron and steel alloys. RPA 500 contains no diethanolamine or nitrites. RPA 500 is an effective rust inhibitor at low concentrations. It is completely soluble in water and may be used as an in-process rust inhibitor. Due to the product’s solubility, you can tailor the product’s concentration to meet your protection requirements. RPA 500 forms a near imperceptible film on machine parts for excellent corrosion protection without forming a sticky residue. It is also compatible in a wide range of water hardness. The clear dilution makes it ideal choice for leak test baths.

FEATURED BENEFITS• Short term nondiscernible film

• Will not leave heavy tacky residues typically associated with water based RP’s

• Low foaming for both spray and dip applications

• Passes 10 freeze thaw cycles

• Nitrite free

APPROVALS• Ford TOX 174072 Certified

• GM C-28446

COMPATIBLE METALSCast IronCarbon SteelTool SteelStainless Steel

TYPICAL USESFuel TanksEnginesHydraulic Tanks & CylindersGear HousingsSteel Drums

APPLICATION METHODImmersion TankSprayFlow-coat

OPERATING TEMPERATUREAmbient to 150°F (66°C)

DILUTION RANGE2 – 10% v/v

RUST PROTECTIONIndoor up to 16 months


RPA 500TECHNICAL DATA



TYPICAL PROPERTIES Fluid Type Water based

Appearance Viscous amber liquid

Odor Mild chemical




Freeze Point 32°F (0°C)

VOC, ASTM 1868 116.0 grams/liter


RPA 500 can be applied to ferrous parts by immersion, spray, or flow-coat systems. Initially a 5% concentration of RPA 500 should be added to the mixed coolant tank. Then adjust the concentration to provide the desired level of protection. RPA 500 can also be used as a standalone corrosion inhibitor. A concentration of 10-15% will provide indoor storage protection for 6-12 months. It is desirable to dry the parts as quickly as possible after treating with RPA 500 to increase the length of corrosion protection. This can be achieved from the blow off after applying in the last stage of a conventional washer.

MIXING DATA

Concentration control is easily maintained with a hand held refractometer or Chemtool titration kit.

Concentration 10% 6% 5% 4% 3% 2%

Titration Test Kit (# drops 0.5 N HCl) 22 13 11 9 7 5

Refractometer Reading 3.75 2.25 1.75 1.50 1.00 .75


APPLICATION

COMPATIBLE METALSCast IronCarbon SteelTool SteelStainless SteelCopperBrass Alloys

APPLICATION METHODImmersion TankSprayFlow-coat

OPERATING TEMPERATUREAmbient to 150°F (66°C)


FOAMING CHARACTERISTICSLow

RUST PROTECTIONIndoors up to 9 months

RPAL 600SYNTHETIC (AQUEOUS BASED) CORROSION INHIBITOR/ CORROSION PREVENTATIVES FOR ALL METALS

PRODUCT DESCRIPTIONRPAL 600 is a synthetic, water dilutable corrosion inhibitor based upon an en-hanced blend of select corrosion inhibitor- surfactant chemistries. RPAL 600 is recommended for applications which require short term (1-3 months) to long term (6-9 months) indoor protection of cast iron, steel, aluminum, copper and brass alloys. RPAL 600 contains no diethanolamine or nitrites.

RPAL 600 exhibits superior wetting and coverage properties on all metallic alloys. This outstanding film coverage is critical for good corrosion protec-tion, especially on complex surfaces and geometries. It is low foaming and is an effective rust inhibitor at low concentrations for immersion application sys-tems. RPAL 600 is completely soluble in water and may be used as either an in-process rust inhibitor or for long term finished storage. Due to the products solubility, you can tailor the products concentration to meet your protection requirements.

RPAL 600 forms a near imperceptible film on machine parts for excellent cor-rosion protection without forming a sticky residue. It is also compatible with a variety of process water chemistries. It is an ideal choice for manufacturers and facilities processing a variety of mixed metals. RPAL 600 also exhibits mild vapor phase properties.

FEATURED BENEFITS• Outstanding in-process corrosion protection on all metallic substrates

• Provides good corrosion protection for all machine surfaces

• Superior wetting and coverage properties

• Excellent pH control and reserve alkalinity

• Outstanding hard water stability

• Excellent corrosion protection on aluminum castings


TYPICAL PROPERTIES Fluid Type Water based

Appearance Viscous amber liquid

Odor Mild chemical



pH (concentrate) 9.5



RPAL 600 can be applied to non-ferrous and ferrous parts by immersion, spray, or flow-coat systems. Initially a 10% concen-tration of RPAL 600 should be added to the mixed coolant tank. Then adjust the concentration to provide the desired level of protection.

RPAL 600 can also be used as a stand alone corrosion inhibitor. Usually a concentration of 10-15% will provide indoor storage protection for three to nine months. It is desirable to dry the parts as quickly as possible after treating with RPAL 600, to increase the length of corrosion protection. This can be achieved from the blow off after applying in the last stage of a conventional washer.

MIXING DATA



Titration Test Kit (# drops 0.5 N HCl) 22 13 11 9 7 5

Refractometer Reading 3.75 2.25 1.75 1.50 1.00 0.75

RPAL 600TECHNICAL DATA




RPAM 70055% NVM AQUEOUS SYNTHETIC CORROSION INHIBITOR

PRODUCT DESCRIPTIONRPAM 700 is a 55% solids in-process aqueous amine carboxylate corrosion inhibitor primarily intended for use as a dilutable fluid to protect, flush, and clean the cooling system/engine blocks during testing of internal combus-tion engines. RPAM 700 is engineered to be fully compatible with ferrous alloys such as cast iron, and steel, “white metals” (aluminum, zinc, magne-sium) and “yellow metals” (copper, brass, and bronze) including all alloys of those metals. RPAM 700 contains a select blend of volatile corrosion inhib-itor (VCI) components such that when the liquid phase wets the substrate and is drained, the thin film emits these components to further protect the headspace against corrosion allowing engines to be shipped without coolant. Wetting agents have been incorporated into RPAM 700 to allow for a more even film coverage especially for complex surfaces and geometries.

Because of the full compatibility and the VCI quality of RPAM 700, the product can be used to protect any high value closed loop systems such as radiators and heat exchangers. If the tank is to hold gasoline, diesel or other oil soluble hydrocarbon it is advised to fully dry the tank prior to shipping to prevent trace water contamination. To ensure the VCI does not evaporate from the headspace it is advised that system is capped and sealed. RPAM 700 is compati-ble with all high grade elastomers such as fluorinated or acrylonitrile that it may come in contact with.

RPAM 700 contains no phosphates, silicones, nonylphenols, dicyclohexylamine (DCHA), diethanolamine (DEA) or nitrites and is compounded with components generally regarded as safe for greater operator acceptance. RPAM 700 is very low foaming and is an effective rust inhibitor at low concentrations. Due to the products solubility you can tailor the product’s concentration to meet your protection requirements however it is generally used at 5–15% concentration.

RPAM 700 forms a near imperceptible film on machine parts for excellent corrosion protection without forming a sticky residue. It is also compatible in a wide range of water hardness. The clear dilution makes it ideal choice for leak test baths as well.

FEATURED BENEFITS• Excellent choice for engine test stand fluid or protecting closed loop systems

• Contains Volatile Corrosion Inhibitors to protect enclosed headspaces

• Nonflammable, easy clean up

• Biodegradeable

• Contains a sequestrant for added hard water stability

• Imperceptible thin film corrosion preventative offers superior rust protection and weldable surface.

• Film is non-tacky

• Dispersant qualities keeps coolant systems of engines, closed systems, and washers clean and free of maintenance

• All ingredients in this product are generally regarded as safe for greater operator acceptance

• Does not contain DEA or DCHA

• Freeze-thaw stable

APPLICATION


RPAM 700TECHNICAL DATA


RPAM 700 is designed primarily for indoor protection only, and typically used as a 5–15% solution and is typically used as a flush, but can be used by spraying, dipping or even brushing. Maximum performance of RPAM 700 can be achieved only when metal surfaces are clean, free of rust, water, ice and mill scale. The metal substrate should be at a temperature of 50° to 130°F (10° to 54°C) at the time of product application.

Ensure that parts are dry before packaging. Do not hermetically seal bags if bagging parts.

MIXING DATA

To ensure highest performance it is recommended to use deionized or reverse-osmosis water. Always add RPAM 700 to the water while mixing to ensure a good mix. Water should be 50° to 130°F (10° to 54°C) when adding RPAM 700.

Concentration 20.0% 15.0% 12.0% 10.0% 5.0% 2.0%

Refractometer Reading 11.0 8.7 7.0 6.2 3.1 1.2

TYPICAL PROPERTIES Fluid Type Amine Carboxylate rust inhibitor

Appearance Clear, light yellow liquid

Film Type Imperceptible

Carrier Type Water

Dry Film Thickness, Dipped, 77°F (25°C), 5% dilution


PRODUCT DESCRIPTIONCT LFRP Extra is a water soluble, volatile rust preventive that provides short term, indoor rust protection to ferrous surfaces. CT LFRP Extra can be used in final stage rinse water for washer applications to eliminate flash rust that can occur when water is used alone to rinse with. CT LFRP Extra is also compatible in a wide range of water hardness and will maintain a clear dilution, which makes it an ideal choice for leak detection test baths where visual clarity is critical. CT LFRP Extra has an additional wetting agent to ensure critical coverage over substrates. CT LFRP Extra forms a nearly imperceptible film on machine parts for excellent corrosion protection without forming a sticky residue. CT LFRP Extra deposits a thin indiscernible film, which when applied and handled properly, gives excellent inside rust protection on ferrous surfaces.

FEATURED BENEFITS• Low applied cost

• Fast drying—product or parts may be heated

• Elimination of fire hazards

• Elimination of hazardous fumes and odors


APPLICATION

CT LFRP EXTRA WATER BASED LOW FILM RUST PREVENTATIVE


CT LFRP EXTRATECHNICAL DATA



TYPICAL PROPERTIES Fluid Type Synthetic

Appearance Clear transparent liquid

Odor Mild, slight amine

Specific Gravity, 77°F (25°C) 1.01


MIXING DATA

Concentration control is easily maintained with the hand held refractometer or Chemtool’s Titration Kit.


Alkalinity (factor = 0.2) Titration Test Kit (# drops 0.5 N HCl)

50 25 20 15 10 5

Refractometer Reading (factor = 5.0) 2.0 1.0 0.8 0.6 0.4 0.2


CT LFRP Extra may be used in spray washers, dip tanks, rinse tanks, and ultra-sonic or vibratory systems. CT LFRP Extra may also be used in leak detection tanks where fluid clarity is critical. CT LFRP Extra water based volatile corrosion inhibitor is intended to be mixed with water at dilution ranges from 1% to 4%.


APPLICATION


APPLICATION METHODSprayImmersion Tank/Agi-LiftUltrasonic

RECOMMENDEDOPERATING TEMPERATURE Ambient to 160°F (71°C)

DILUTION RANGE 5 – 20% v/v


RUST PROTECTIONLimited Indoor

RUST RIDNEUTRAL PH RUST REMOVER

PRODUCT DESCRIPTIONRust Rid is a uniquely formulated water-based rust remover that exhibits a near neutral pH. Rust Rid is ideally suited for removing rust on cast iron alloys, tool steels, and all carbon steels. Rust Rid is most effective against surface and blush rust. Rust Rid contains no caustic, toxic, or hazardous components.

Rust Rid offers excellent wetting and de-foaming properties allowing for uniform coverage on complex part geometries in immersion applications.

Note: For best results it is recommended that Rust Rid be used in immersion baths for optimum exposure and coverage. In addition, if Rust Rid is to be used for extended periods of time, it should be used only in process vessels composed of plastic, fiberglass, or stainless steel alloys (316 stainless steel) to avoid potential chelation and staining of process vessel surfaces.

Although heat accelerates the rust removing ability of Rust Rid, it can be extremely effective at ambient temperatures if given sufficient concentration and processing time. For purposes of testing, evaluate Rust Rid at 15% to 25% in cold solutions and 5% to 20% in solutions at 140°F or 160°F depending on the substrate metallurgy and condition as well as the type and degree of corrosion being removed. Initial screening evaluations should be conducted in the lab prior to full-scale implementation under industrial conditions.

FEATURED BENEFITS• Neutral pH for easy handling and worker health, safety, and piece of mind

• Low use concentration assures low consumption and cost effectiveness

• Dilutes easily and hard water stable

• Low foaming

• Excellent wetting and coverage on all ferrous alloys

APPROVALS• Super-compliant for California SCAQMD Rule 1144


RUST RIDTECHNICAL DATA



TYPICAL PROPERTIES Fluid Type Water based/slightly acidic

Appearance Straw yellow liquid

Odor Chemical



pH (concentrate) 7.0


Freeze Point 25°F (-4°C)

VOC, ASTM 1868 Nil

MIXING DATA

Rust Rid fluid is to be mixed with water for use. Always add product concentrate to the water, not water to product concentrate. Add with mild agitation. Product concentration can easily be monitored by refractometer.

Concentration 20.0% 15.0% 10.0% 7.0% 5.0%

Refractometer Reading 5.00 3.75 2.50 1.75 1.25


Rust Rid should always be added to the water in the system tank with mild agitation. Mild agitation during use will also improve performance. Filter accumulated rust from the system over time.

Operation Temperature Cast Iron and Ferrous Alloys

Spray Washer Ambient to 160°F (to 71°C) 10 – 25%

Immersion Tank / Agi-Lift Ambient to 160°F (to 71°C) 5 – 20%


TYPICAL PROPERTIES Fluid Type Strong caustic cleaner/rust stripper

Appearance Clear yellow liquid

Odor Mild


Weight, 60°F (15.6°C) 12.25 lbs/gal.


Foaming Tendency Very low to none

COMPATIBLE METALSCast IronCarbon SteelTool St eelStainless Steel

APPLICATION METHODEnclosed Spray WasherImmersion TankAgi-Lift

OPERATING TEMPERATURE140° to 180°F (60° to 82°C)


FOAMING CHARACTERISTICSVery low to none

RUST PROTECTIONShort term

APPLICATION

LARZIP 30HEAVY DUTY FERROUS CAUSTIC CLEANER AND RUST REMOVER

PRODUCT DESCRIPTIONLarzip 30 is a highly caustic, highly concentrated alkaline cleaner and rust stripper. Larzip 30 is recommended for use on steel substrates. Larzip 30 is also highly effective for carbon removal, rust removal, paint stripping (with a solvent additive –10% Paint Strip Additive) and zinc phosphate removal. Paint removal properties accelerated with the addition of Elimicote Additive PR/LAC Additive BA at 4%-15% The residual films of Larzip 30 can provide flash rust protection for short term in-process corrosion protection for parts in storage and during shipping.

FEATURED BENEFITS• Improved rust removal with “chelating” action

• Excellent carbon removal

• High temperature stable/hard water stable

• Low foaming for use in high pressure spray cabinets

• Increased detergency for oil and grease removal (with DAC 900)

• Flash rust and corrosion protection

• Excellent oil rejection

• Softens and loosens paint (accelerated with addition of Elimicote Additive PR/LAC Additive BA.)


Recommended Operating Parameters for Larzip 30 and Elimicote Additive BA/LAC Additive BA

Degree of rust, paint, carbon

Spray Immersion (limited agitation)

Larzip 30 Elimicote Additive BA

/LAC Additive BA

Temperature Time Larzip 30 Elimicote Additive BA

/LAC Additive BA

Temperature Time

Light 5% 5 – 7% 140°F (60°C) 10 minutes

5% 5 – 7% 140°F (60°C) 15 minutes

Medium 5 – 8% 5 – 7% 140°F (60°C) 10 – 15 minutes

5 – 10% 5 – 7% 158°F (70°C) 15 – 30 minutes

Large 8 – 12% 10% 158°F (70°C) 11 – 45 minutes

10 – 40% 10% 158° to 176°F (70° to 80°C)

11 – 45 minutes

All recommended operating parameters are based on previous trials and should be used as a guide when setting up a wash process. Start at the lower end of the concentration and time recommendations to avoid any darkening of the metal being washed and to evaluate the most efficient process.


Larzip 30 is recommended for enclosed high pressure washer spray systems. For added detergency, DAC 900, a low foaming detergent additive, should be used with Larzip 30. Consult your technical representative for usage instructions.

Larzip 30 is recommended for use at elevated temperatures (160° to 180°F) for the most effective cleaning and rust removal. Larzip 30 is ideally suited for facilities requiring a high degree of cleanliness on their ferrous materials. Larzip 30 should always be added to the water in the washer.

Operation Temperature Cast Iron, Steel, Ferrous Alloys

Rust Stripping/Reman Parts Cleaning

Aluminum Alloys

Spray Washer 140° to 180°F (60° to 82°C) 5 – 25% 30 – 60% Not Recommended

Immersion Tank/Agi-Lift 140° to 180°F (60° to 82°C) 5 – 25% 30 – 60% Not Recommended

MIXING DATA

Larzip 30 concentration is best monitored by means of a Chemtool Total Alkalinity Titration Kit, Refractometer, or buret style acid base titration method.

Concentration 50% 40% 30%

Free Alkalinity, 5.0ml bath, 25 ml DI water, pth, 1.0N HCL %v/v Conc.=1.818 (ml Titr.) – 1.2076

28.2 22.7 17.2

Total alkalinity, 5.0ml bath + 25ml DI Water, bcg/mo, 1.0N HCI %v/v Conc.=1.7542 (ml Titr.) – 0.2883

28.7 23.0 17.3

LARZIP 30TECHNICAL DATA




COMPATIBLE METALSSteelCast IronStainless Steel

APPLICATION METHODDunk or spray washers

RECOMMENDEDOPERATING TEMPERATURE120° to 150°F (49° to 66°C)

RECOMMENDED DILUTION RANGE10 – 25% v/v


RUST PROTECTIONProvides in-process corro-sion protection. For long term corrosion protection in storage or shipping, parts should be painted or an RP applied.

APPLICATION PRODUCT DESCRIPTIONABC 1106 is an inhibited, concentrated liquid phosphoric acid cleaner and descaler formulated to remove rust, oil, and laser welding scale on steel products. ABC 1106 should not be used on galvanized parts, brass or copper parts. ABC 1106 is recommended for all steel parts requiring in-process rust removal, brightening or scale removal.

ABC 1106 is a heavy duty parts cleaner and may be used to remove rust on painted or unpainted steel, cast iron or aluminum parts. It may be used as part of a five or seven stage wash process prior to painting or coating parts.ABC 1106 contains a high level of surfactants and may be used to clean parts with heavy oil or soil loads. It is effective in removing welding scale and slag from laser welded parts. ABC 1106 contains a rust inhibitor to prevent flash rusting on parts and equipment. It is intended for heated wash tanks at 120° – 150°F, although it may be used in soak applications at ambient temperatures.

FEATURED BENEFITS• Enhanced Acid Cleaning technology for removing soils and welding slag from stamped, formed and welded parts and tubing

• Effectively removes rust and mineral deposits from tubing and parts

• Safe for aluminum, steel, cast iron and stainless steel

• High performance, low foam detergent package for removing oily soils in soak or spray applications

• Excellent product for pre-paint applications

• Corrosion inhibitor to prevent attack on base metal

• May be used as a rust remover on most painted steel surfaces

APPROVALS• Super-compliant for California SCAQMD Rule 1144

ABC 1106 LIQUID ACID BASED SCALE, RUST, WELDING SLAG AND BRAZING MATERIAL CLEANER


ABC 1106TECHNICAL DATA



TYPICAL PROPERTIES Fluid Type Acid based cleaner

Appearance Clear, light gold liquid

Odor Mild

Specific Gravity 1.35

pH Approximately 0.5

Freezing Point -20°F (-28.9°C)

VOC, ASTM 1868 Nil


ABC 1106 is a heavy duty parts cleaner and should be used on unpainted steel, cast iron or aluminum parts. It may be used as part of a five or seven stage wash process prior to painting or coating parts. ABC 1106 contains a high level of surfactants and may be used to clean parts with heavy oil or soil loads. It is effective in removing welding scale and slag from laser welded parts. ABC 1106 contains a rust inhibitor to prevent flash rusting on parts and equipment. It is intended for heated wash tanks at 120° to 150°F, although it may be used in soak applications at ambient temperatures. ABC 1106 wash stage should be followed by a tap water rinse stage.

MIXING DATA

The concentration of ABC 1106 may be controlled using an acid titration procedure.Titrant: 0.1 N NaOH Sample Size: 1 ml Indicator: Bromcresol green-methyl red indicator. Titrate to color change.

Concentration 14% 12% 10% 8% 6% 4% 2%

Base (factor = 0.035) Titration Test Kit (# drops 0.1 N NaOH)

10.5 9.0 7.5 6.0 4.5 3.0 1.5

TANK SIDE ADDITION EQUATION%v/v= 1.333(titration, mL)

(Target concentration – %v/v) Tank capacity = amount to add100



OPERATION/APPLICATION METHODSprayImmersion Tank/Agi-Lift

RECOMMENDEDOPERATING TEMPERATURE140° to 160° (60° to 71°C)

RECOMMENDED DILUTION RANGE5 – 15% v/v


RUST PROTECTIONLimited Indoor

APPLICATION PRODUCT DESCRIPTIONHydrosolv 57 is a heavy duty concentrated liquid alkaline cleaner used primarily in industrial applications for in-process cleaning of ferrous metals. Using the latest additives for detergency and wetting available, Hydrosolv 57 offers exceptional cleaning properties for the removal of most industrial contaminants, particularly smut and fine particulate entrained into the substrate’s surface. If you do not rinse parts after cleaning, residual films of Hydrosolv 57 can provide indoor corrosion protection for parts in between machining processes.

FEATURED BENEFITS• Extremely low foaming characteristics ideal for high-pressure washers


• Exceptional hard water stability keeps washers clean and maintenance free

• Lean concentrations assure low consumption and cost effectiveness


• Contains no nitrites or silicones

• Contains phosphate

HYDROSOLV 57 LIQUID ALKALINE SPRAY CLEANER


HYDROSOLV 57TECHNICAL DATA



TYPICAL PROPERTIES Fluid Type Alkaline cleaner

Appearance Clear green liquid

Specific Gravity, 60/60°F (15.6/15.6°C) 1.09


pH (5% dilution) 11.5 – 12.5

Foaming Tendency Low

MIXING DATA


Concentration 6% 4% 2%

Alkalinity (factor = 0.22) Titration Test Kit (# drops 0.5 N HCl)

27 18 9

Refractometer Reading (factor = 2.2) 2.5 1.8 1.0


Hydrosolv 57 leaves a thin, transparent rust proofing film which will not only prevent problems with subsequent gauging on critical dimensions but will not show

corrosion inhibitors - chemtool incorporated...thixotropic and corrosion inhibitors intended to...

Documents