corte lambruschini – torre b 16129 genova...

sssiiidddeeecccooo

Corte Lambruschini – Torre B Piazza Borgo Pila 39

16129 – Genova telephone ++39 010 8681650

From 1977, after many years of activity, Sideco has achieved a leading position internationally among the suppliers of piping for power plants and for the chemical and petrochemical industries, and in particular for tubes, pipe-fittings, flanges and other accesories in all type of steel and special alloys. Sideco is a fully qualified and reliable supplier, able to guarantee full compliance with specifications and utmost observance of time schedules.

sideco is not only commited to the accurate supply of single materials or of assorted packages but fulfils a comprehensive service including: inspection, expediting, materials, documentation control and, when required, coating and lining, prefabrication, storage and delivery to destination. Piping is supplied in carbon and low alloy steel, ordinary and special stainless steel and duplex, as well as in copper alloys, titanium and special alloys.

Headquarters Corte Lambruschini –Torre B Piazza Borgo Pila, 39 16129 GENOVA ITALY telephone ++39 010 8681650 telefax ++39 010 8681198 web site: www.sideco.it E-mail: [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Registration no. 32316, Genoa VAT 00879670107 SHARE CAPITAL 1.000.000 EURO

Warehouse Strada Padana Superiore, 6 25045 Castegnato, BRESCIA

massimo

Font monospazio

massimo

Barra

sssiiidddeeecccooo

Corte Lambruschini – Torre B Piazza Borgo Pila 39

16129 – Genova telephone ++39 010 8681650

telefax ++39 010 8681198 EDITION AUGUST 2012

OUR MAIN BANKING REFERENCE

- UNICREDIT BANCA D’IMPRESA UNICREDIT GROUP Headquarter Genova

- INTESA SAN PAOLO SPA Filiale Imprese di Lavagna (Genova)

- BANCA NAZIONALE DEL LAVORO BNP PARIBAS GROUP Headquarter Genova

- BANCA CARIGE BANCA CARIGE GROUP Unita’ Imprese Ge - Levante (Genova)

- MONTE DEI PASCHI DI SIENA Headquarter Genova

- BANCA REGIONALE EUROPEA UBI BANCA GROUP Headquarter Genova

- BANCA POPOLARE DI LODI BANCO POPOLARE GROUP Branch Recco (Genova)

- CARIPARMA /

CARISPEZIA CREDIT AGRICOLE GROUP Headquarter Genova

sideco applicable standards for supplied products

product range Pipes and tubes Seamless line pipe black or lined up to 36” diameter according to ASTM, ASME, API, UNI, DIN, ANSI standards. Welded pipes (ERW, SAW, EFW, GMAW, PAW) longitudinal or spiral weld seam up to 60” diameter according to above standards. Finned tubes, from 3/8” to 3” for heaters, boilers, heat exchangers, air coolers and other purposes in the following executions: enbedded type, edge tension wound, tension wound footed type, tension wound overlap: fin can be provided in alluminium, carbon steel, copper and other alloys. Tubes, U-bent tubes for boilers, heat exchangers, condensers according to ASTM or other international standards. Type of material supplied: carbon steel, alloy steel, austenitic steel, ferritic-austenitic steel, titanium, copper, copper alloys, monel , inconel, hastelloy, incoloy. Main material codes and main dimensional standards applied: ASTM A106, A120, A178, A179, A200, A209, A210, A211, A213, A249, A269, A312, A333, A335, A358, A403, A409, A511, A789, A790, B68, B280, B163, B167, B337, B338, B407, B423. Steel grades: Gr.B, Gr.3, Gr.6, P1, P2, P5, P11, P22, Tp 304, Tp 304L, Tp 316, Tp 316L, Tp 321, UNS S31803, UNS S31550, UNS S32750, UNS S32760, UNS S31254, UNS C70600, UNS C70500, UNS N06600, UNS N08800, UNS N08825, UNS N08925, UNS C12200. API SPEC. 5L Gr.B, X42, X52, X60, X65. Dimensions acc. to ANSI B36.10, B36.19, API 5L.

Plates Steel plates, sheet, strip, cold or hot rolled, cut in length or in coils, with or without specific edge or with specific finish in all sizes required by client for general and specific purposes. Type of materials supplied: carbon steel, high strength carbon steel, austenitic and martensitic stainless steel, nickel and nickel based alloys. Main material codes and main dimensional standards applied: ASTM A240, A515, A516, A537, A20. Gr.60, Gr.65, Gr.70.


Butt weld fittings Seamless: Elbows and bends, short and long radius, bends (made by cold forming, hot forming in dies or by hot induction method), tees, caps and reducers up to 36” diameter according to ASTM, ASME, MSS SP 75, UNI, DIN, ANSI Standards. Welded: Elbows and bends, short and long radius, tees and reducers uo to 72” diameter, bends (made by hot induction method up to 48” diameter). Larger diameters can be produced in mitered execution. Type of materials supplied: carbon steel, alloy steel, austenitic steel, ferritic-austenitic steel, titanium, copper, monel, inconel, hastelloy, incoloy. Main material codes and main dimensional standards applied: ASTM A234, A403, A420, A815, B363, B366. Steel grades: WPB, WPL6, WP11, WP12, WP22, WP 304, 304L, WP316, 316L, WP 321, UNS S31803, UNS S31550, UNS S32750, UNS S32760, UNS S31254, UNS N06600, UNS N08800, UNS N08825, UNS N08925. MSS SP 75 WPHY 42, 52, 56, 60, 65. Dimensions acc. ANSI B16.9, ANSI B16.28, MSS SP 43, MSS SP 75. Others: Lateral, saddles, sphere, tee, split tee and pigging tees designed according to customer requirements. Small Bore forged fittings & self reinforced outlets Elbows, tees, crosses, couplings, half couplings, plugs, caps, bushings, unions, reducing inserts, hexagonal, straight and swage nipples with socket weld or threaded ends, butt weld outlets, socket outlets, threaded outlets, elbow, nipple and lateral outlets according to ASTM, ASME, UNI, DIN, ANSI, MSS SP standards. Material used: carbon steel, alloy steel, austenitic and austenitic-ferritic steels, titanium. Main material codes and main dimensional standards applied: ASTM A105, A181, A182, A350, A694. Steel grades: F5, F9, F11, F22, F304, F304L, F316, F316L, F321, F44, F51, F42, F52, F60, F65, UNS N08800, UNS N08825, UNS N08925, UNS C70600.

Dimensions according to ANSI B16.11, BS3799. For self reinforced outlets design calculations are carried out according to ANSI/ASME B31.1 or other Client specifications.


Compression fittings Unions: reducing union, bulkhead union, union elbow, union tee, union cross, male connector, male thermocouple connector, male elbow, male run tee, male branch tee, female connector, gauge connector, female bulkhead connector, female elbow, female run tee, female branch tee, male adaptor, female adaptor, tube end reducer, tube end bulkhead adaptor, eye banjo couplings, non return valves, shut-off valves, ball valves, control needle valves, fittings for plastic hose for process control and instrumentation. Material used: carbon steel, stainless steel, brass. Main material and dimensional standard applied: ASTM A105, A479, tp 316, A182 F316, B16 alloy 360, B453 alloy 345, B124 alloy 377. Dimensions acc. manufacturer standard, BS 4368 part 3; thread according ANSI B1.20.1, BS 3643, ISO 261, ISO 262. Flanges Welding neck, slip-on welding, screwed, lapped, socket welding, blind, reducing, orifice, anchor and swivel ring type up to 78” according to ASTM, ASME, API, BS, UNI, DIN, ANSI, MSS SP 44, AWWA, TEMA. Material used: carbon steel, alloy steel, austenitic and austenitic-ferritic steels, titanium. Main material and dimensional standards applied: ASTM A105, A181, A182, A350, A694, B381. Steel grades: F5, F9, F11, F22, F304, F304L, F316, F316L, F321, F44, F51, F42, F52, F60, F65, UNS N08800, UNS N08825, UNS N08925, UNS C70600, F2. Dimensions acc. to ANSI B16.25, ANSI B16.36, ANSI B16.1, B16.47, API 605, API 6A, MSS SP 44, BS 3293, AWWA C207-55. Others : long welding neck, buttered flanges, weld overlayed flanges, spectacle blinds, blind and spacers, drip rings, stub ends, orifice plates, tube sheets, girth flanges, pieces according to client drawings or different international standards.

Gaskets Metal plastic, octagonal or oval ring joints and spiral wound gaskets for flanges and heat exchangers. Materials: rubber, PTFE, fibres, , ceramic, lead, brass, copper, aluminium, stainless steel, carbon steel, soft iron, titanium, austenitic steel for urea grade, special alloys, nichel, monel, inconel.


Valves From ½” up to 80” in all ratings in different material grades suitable for all application. Valves can be supplied in carbon steel, alloy steel, stainless steel and other alloys (from standard carbon steel to ASTM A105 or A216 WCB up to stainless steels ASTM A351 CF8, CF8M and special alloys like monel, inconel, incoloy).The type of valve supplied includes globe, solid wedge gate, ball (full and reduced bore, floating and trunnion mounted) , butterfly, swing check, plug valves, manually or gear operated; with or without actuators and control panels. The main codes applied are ANSI B16.5 or B16.47 for flanged ends, ANSI B16.34, API 600, API 6D, BS 5351, BS 6755. In the event of a contract drawings are usually supplied for client approval with detailed part list, spare part list and instruction for assembling and maintenance. When required also after sale service can be supplied..


Other products Stud bolts, bolts and nuts, washers, structural tubolars products, shapes, angles., flat and round bars. Flowglasses, Pig launchers and receivers, manifolds, electrical cables, special equipments according to the client’s drawings. Coating and lining Material can be supplied coated and/or lined or can be arranged coating and/or lining of “free-issued” materials supplied by the client. Types of outer coating can be: standard and heavvy duty coating consisting of a priming coat of bituminous paint, one or more layers of treated bituminous substances, a spiral wrapping of bitumen bonded glass cloth tape between each bituminou layer, a final painting with limewash containing additives against sun beams. Polyethylene coating, applied by fusion or extrusion on steel piping; polyurethane coating priming coat with high build zinc rich ethylsilicate primer; epoxy coating. Type of lining can be bituminous or epoxy coal tar. However other types of coating and lining can be carried out according to client specifications. Prefabrication Prefabrication of spools of either carbon or stainless steel and special alloy piping components can also be provided . The supply of the spool can be inclusive of materials and fabrication or can be limited to the simple fabrication of free issued materials supplied by the client. Prefabrication is carried out according to Customer specification and/or drawings, if necessary drawings can be issued for approval.


WAREHOUSE LOCATION AND CAPABILITIES

stock & storage In the different warehouses (the pictures are relevant to the sideco warehouse, in Castegnato, Brescia) materials are stored for stock or for further division in various lots to be despatched separately to different destinations according to the customer’s instructions. Identification markings like colour coding, tagging and special packaging can also be provided. Materials are also stored on behalf of customer pending shipping instructions. The material at warehouses are fully traceable at any time. Brescia warehouse: Total available stock holding area: up to sq.m. 7500 Indoor: up to sq. m. 1500 Covered: up to sq. m 1000 Maximum lifting capacity : M/tons 35 Lifting equipments: 2 (two) bridge cranes, 2 (two) fork lifts.

types of packaging Packaging are usually carried out according sideco standards or, when agreed, according to prescriptions specified by the client. All type of packaging can be carried out by sideco; detailed packaging specification are available and can be supplied on request : the types of packaging can be identified as: reduced packaging is available for carriage of materials which cannot be damaged by falling during transport, loading and unloading and handling in store; in this case, packaging is limited to the protection of delicate mechanical parts. Pipes are generally shipped loose or in bundles; fittings and flanges are shipped on pallets covered by polyethilene film.

overseas for carriage by sea and then by road or rail with numerous transhipments : steel pipes of carbon steel, low alloy steel, galvanized, in diameter up to 2” and under 2 mm in wall thickness will be packed in crates; pipes up to 4” are made up into bundles with a maximum weight of 2000 kgs; the end of pipes are protected by plastic caps. Pipes in stainless steel, copper and alluminium will be packed in cases, or covered with polyethilene film and packed in crates. Flanges, valves and fittings for overseas transport are to be packed in cases or crates; carbon and low alloy steel material will be protected against oxydation by means of standard mill varnish. Flanges will be packed in order to avoid mechanical damage to the gasket contact surface.

QUALITY ASSURANCE AND QUALITY CONTROL

quality control Sideco ensure the carrying out of specific examinations, which may range from the control of production to presence at destructive or non-destructive tests and which always includes checks on the material test certificates issued by manufacturers. Inspector at sideco undergo periodic training and updating. Inspection are carried out according specific quality plans or check lists. type of test that can be performed on materials The following test are usually witnessed by sideco when required by client or when foreseen in applicable quality plans: • tensile test • bending, flattening,

flaring test • hardness test • impact test • chemical analysis • metallographic

examination • corrosion test • hydrostatic test • pneumatic test • functional test • x-ray, dye penetrant,

magnetic particle, ultrasonic and eddy current tests

• final visual and dimensional examination

• check of marking, packing

• loading operations

• Sideco inspectors are fully qualified. Curriculum Vitae of inspectors are available on request. Sideco inspectors are qualified II level in accordance with EN 473 for the following ndt methods:

• Dye Penetrant (PT) • Magnetic particle

(MT) • Ultrasonic test (UT) • Reading of

radiographic films (RT)

expediting Expediting activities are carried out by sideco expeditors in order to ensure that materials are delivered on time according to the contract and in line with the project schedule besides highlighting possible unforeseen events that could be cause of delay. Expediting activities are systematically carried out according to a specific procedure that keeps the work process under control by means of periodic controls of the supplier’s manufacturing schedules. The expeditors during their surveillance activities follows a specific expediting check list that includes: • review of order content

and evaluation of supplier production capability

• review of the correct understood, by the supplier, of order requirements

• availability of the necessary material for construction and in the negative review of schedule time of arrival.

• review of expediting activities of supplier on the respective sub-supplier’s.

• review of approval status of the documents related to production, inspection, release of material for shipment

• effective production status and respective scheduled date of material ready for final inspection

After review of above points the results of expediting activities are written in a report and forwarded to client.


quality assurance system quality assurance manual Sideco is acting according to a quality assurance system designed in accordance with the applicable parts of ISO 9001 standard. Internal specific procedures and instructions complete rules identified in quality assurance manual. organization Sideco have fully defined the organization and interrelations between each office. The quality system is constantly under control by means of internal audits and management review. contract review Each contract is reviewed by the area manager and when necessary by the quality assurance manager in order to ensure that all contractual requirements are adequately defined and documented, and that any requirement differing from those in the tender has been examined and met. The contract review results are documented. Afer satisfactory results on contract review the order data are introduced into the computer system enabling an efficient and updated job control.

design Design and design controls are not part of the activities carried out by sideco; if required, design activities are subcontracted to selected engineering companies, qualified to comply with the client’s requirements. document control All the technical documents relating to or affecting quality are reviewed and approved by the QA manager or other authorized personnel. Revision of documents follow the same procedure. purchasing All suppliers of sideco are qualified according to sideco procedure. Suppliers are classified according to the following categories: type A – suppliers approved by sideco based on quality management system approved by a third party according BS EN ISO 9000 series. type B – supplier approved by sideco based on satisfactory results of audits carried out by QA representative. type C – supplier approved by sideco on historical basis. type D – supplier indicated by client Records of the performed assessment are filed by the quality assurance office. Supplier’s performances are

systematically monitored. Suppliers are selected on the basis of their ability to meet contract requirements. All purchase orders are issued by sideco in writing and only to pre-qualified suppliers. Purchasing documents issued by sideco are reviewed prior to issue; revision to purchase order follow the same procedure. product identification An identification system is applied by sideco for all material available in sideco warehouse. For materials that are produced by manufacturers according to sideco purchase order the product identification is carried out by the supplier. In any case and at any time it is possible to correlate product relevant to job number and also the material designation, heat number and batch number, if required. activity control Activities are carried out in accordance with applicable procedures and instructions. Monitoring and controlling activities are performed during different stages, in order to achieve and assure the required final quality. The following activities are carried out by Sideco : evaluation of enquiries, selection of suppliers,


training

Training is relevant to all personnel of sideco. Training programmes is established by management on periodic basis . statistical techniques

Statistical evaluation is used for control of non-conformities, customer complains and control of performances of suppliers. certification of approval

Original approval date : 11 November 1994 The quality management system has been assessed and found to be in accordance with the requirements of the quality standards ISO 9001:2008 by Bureau Veritas Quality International. Subject to sideco’s continued satisfactory operation. Current valid certificate no. 209021 Expiry date 16 December 2015. Sideco is registered Achilles JQS Company reg. no. 227864, ID 14833. The qualification concerns the product and service categories listed in the ISO 9001 scope of supply.

Reference list supplies Customer Project Equipment Materials

sideco in bold offshore project

Year of supply 1995

HELLENIC ASPROPYRGOS REFINERY C/O TPL

HDSU / V -3400 AND SRU/V 2750 - GREECE

CONDUIT PIPES UNI 7683

SAGA PETROLEUM / AKER ENG.

VIGDIS - NORWAY B.W. FITTINGS, SPADE AND SPACERS

MSS SP 75 GR.WPHY 52 MOD. -ASTM A516 GR. 70

STATOIL

NORNE - NORWAY B.W. FITTINGS, SPADE AND SPACERS

ASTM A420 WPL6, MSS SP 75 WPHY52 MOD., ASTM A815 UNS S31803, ASTM A182 F51, ASTM B625 UNS N08925

CONOCO C/O M.W. KELLOG

HUMBER REFINERY VACUUM UNIT - U.K.

FLANGES, FORGED FITTINGS, SPADE AND SPACERS

ASTM A182F316L (min: Mo 2.5%)

ENGINEERING INDIAN OIL CORP. LTD./EIL

CRUNATHURA, INDIA C.S. FLANGES ASTM A105

GAS AUTHORITY OF INDIA / EIL

UPPC, AURAIYA, INDIA

B.W. FITTINGS HIGH STRENGTH C.S. MATERIAL (MSS SP 75 WPHY52)

GAS AUTHORITY OF INDIA LTD. / EIL

GREP (HBJ) BIJAIPUR DADRA, INDIA

SEAMLESS PIPES API 5L Gr.B

OIL & GAS EQUIPMENT COMPANY LTD C/O STONE & WEBSTER

RASTANURA UPGRADE, SAUDI ARABIA

FLANGES, FORGED AND B.W. FITTINGS, FIGURE 8

UNS N08925, Cu/Ni 90/10, 316L, UNS N08020

RELIANCE INDUSTRIES LTD.

HAZIRA, BOMBAY, INDIA SEAMLESS AND WELDED STAINLESS STEEL PIPES, C.S. AND S.S. FLANGES AND B.W. FITTINGS

ASTM A312 Tp 304, 316, 321, 347, ASTM A358 CL.1 Tp 304, Tp 316, Tp 321, Tp 347

AKER STORD

NJORD FLOATING PROJECT

SEAMLESS PIPES, FORGED AND B.W. FITTINGS SPADE AND SPACERS

API5L X52, ASTM A694 F52, A420 WPL6, A516 GR.70, A860 WPHY 52.

ABB SAE SADELMI

EL KUREIMAT - EGYPT C.S. FITTINGS AND FLANGES ASTM A234 WPB, WP22, ASTM A105,Tp 304, Tp 316L

SNAMPROGETTI

LANZHOU FERTILIZER PROJECT - CHINA

FORGINGS FOR TUBE SHEET ASTM A182 F304, F316

ANSALDO

HUBCO POWER, PAKISTAN

C.S. & S.S. SEAMLESS PIPES ASTM A106, A312 Tp 304, Tp316

TECHNIPETROL C/O AMOCO

N° 2 PTA PROJECT - COOPER RIVER PLANT - USA

PIPES, B.W. AND FORGED FITTINGS, FLANGES, AND STUB ENDS

STAINLESS STEEL MATERIAL (ASTM A106, A105, Tp 304L, Tp 316L)

WESTERN MINING CORP. LTD C/O MITSUI

EAST SPAR DEVELOPEMENT - AUSTRALIA

B.W. AND FORGED FITTINGS, FLANGES

CARBON STEEL TO ASTM A105, A234 WPB, A350 GR.LF2, A420 WPL6

BROWN AND ROOT

KURASINI - TANZANIA C.S. PIPES, B.W. AND FORGED FITTINGS, FLANGES, GASKETS AND STUD BOLTS

C.S. TO ASTM A106 GR.B, API5L GR.B ASTM A105, ASTM A234 WPB

TECHNIPETROL C/O API

RAFFINERIA DI ANCONA - ITALIA

CONDUIT PIPES AD-PE UNI 7683, 5745

AKER ENG.

ZEEPIPE - NORWAY FLANGES, TEES, ELBOWS, REDUCERS AND END CAPS

HIGH STRENGTH CARBON STEEL, IMPACT TESTED (WPHY65, 60, 52)



Year of supply 1996

MAN GHH

THALAMKO - INDIA ENGINEERING AND PREFABRICATION OF SPOOLS

VALVES, PIPES, FITTINGS , FLANGES AND ACCESSORIES IN CARBON AND STAINLESS STEEL MATERIAL

F.W.I

EQUATE AL SHUAIBA KUWAIT - ETHYLENE GLYCOL - PROJECT

COMPLETE PACKAGE OF PIPES, FITTINGS AND FLANGES

ASTM A106 GR.B, API 5L GR.B, ASTM A105, A182 F304/304L, F316/F316L, F44, A234 WPB, MONEL 400

ANSALDO

JEBEL ALI - DUBAI - U.A.E. C.S. AND S.S. FLANGES AND PLATES

ASTM A105, A182 F316L, A515 GR. 60

ANSALDO

MIRFA POWER & DESALINATION PLANT, ABU DHABI - U.A.E.

C.S. LARGE SIZE FLANGE, FORGED AND B.W. FITTINGS IN CARBON AND STAINLESS STEEL

ASTM A105, A182 F316L, A403 WP 316L

HYDRO - TECNOLOGY & PROJECT DIVISION

VISUND - NORWAY FLANGES AND SELF REINFORCED O’LETS

TTIANIUM - ASTM B381 GR.F2

ANSALDO ZAHRANI - LEBANON PIPES FOR SEALINE CONCRETE WEIGHTED PIPES AND BENDS, API 5LX52 MODIFIED

TITAS GAS GAS TRANSMISSION & DISTRIBUITION - BANGLADESH

COMPRESSION TUBING FITTINGS

AISI 316

F.W.I.

COMUNANZA COGENERATION UNIT (AP) - ITALIA

PIPING MATERIALS: PIPES, FITTINGS, FLANGES AND ACCESSORIES


F.W.I.

TEVEROLA COGENERATION UNIT - ITALIA

PIPING MATERIALS: PIPES, FITTINGS, FLANGES AND ACCESSORIES


COEMSA / ANSALDO BRASIL HEAVY W.TH PLATES WITH IMPROVED DEFORMATION PROPERTIES

ASTM A537

HITACHI ZOSEN

ASGARD - NORWAY TITANIUM FLANGES ASTM B381 GR.F2

GAIL

UPCC AURAYA -INDIA LARGE SIZE, SMLS PIPELINE API 5L GR.B, ASTM A333 GR.6

GAIL

GREP (HBJ) FARIDABAD, VIJAIPUR, AONLA AND HAZIRA TERMINAL PROJECT - INDIA

SMLS PIPELINE API 5L GR.B

SUNKYONG ENGINEERING & CONSTR’JCTION LTD.

TOR PROJECT - THAILAND HEAT EXCHANGER TUBES ASTM A178, ASTM A249



Year of supply 1996

IPCL

GANDHAR PETROCHEMICAL COMPLEX - PHASE I & II - INDIA

SMLS. PIPE LINE, FORGED FLENGES

API 5L GR.B, ASTM A350 LF2, LF3

TECHNIPETROL

NO.1 - PTA DEBOTTLENECKING AMOCO CHEMICAL - MALAYSIA

PIPES AND ACCESORIES FOR PNEUMATIC LINES, L.W.N. SPECIAL FLANGES, B.W. FITTINGS

AISI 321, AISI 304

TECHNIPETROL

JIZAN BULK PLANT EXPANSION - ARAMCO - SAUDI ARABIA

FORGED FITTINGS AND VALVES (GATE, CHECK, BALL)

ASTM A 105, API 5L GR.B, ASTM A234 WPB, VALVES IN BRONZE, MONEL AND SPECIAL ALLOYS.

SNAMPROGETTI

ZAKLADY CHEMICZNE OSWIECIM - POLAND

PIPES AND FITTINGS ALLOY 800HT - SERVICE TEMPERATURE ABOVE 760°C

ANSALDO

LIBERTY - PAKISTAN LOW ALLOY PIPES AND FITTINGS

ASTM A335 P91

ANSALDO

CENTRALE TERMIQUE DE RADES - TUNISIE

PIPES, FITTINGS, FLANGES, PLATES

CARBON STEEL, LOW ALLOY STEEL AND STAINLESS TEEL TO ASTM STD.

TECHNIP - ABAY ENGINEERING

ARAK REFINERY - IRAN S.S. SMLS. PIPES ASTM A312 TP 316 - 8 KM

ANSALDO

ZAHRANI & BEDDAWI - LEBANON

PIPES, FITTINGS AND FLANGES

CARBON STEEL & STAINLESS STEEL

SNAMPROGETTI SUD

ENICHEM - PRIOLO - ITALY

SMLS PIPES AND FLANGES MONEL 400 (UNS N4400, HASTELLOY C276)

ANSALDO

AGHIOS DIMITRIOS S.E.S. UNIT 5, GREECE

PIPES, FLANGES, FORGED AND B.W. FITTINGS IN CARBON, LOW ALLOY AND STAINLESS STEEL

15Mo3, 13CrMo44, ASTM A 106 GR.B, ASTM A234 WPB, WPB11, ASTM A105, A182 F11, F304/304L



Year of supply 1997

BAKHARRABAD GAS SYSTEMS LTD.

BGSL/FPO/OECF - 04 BANGLADESH

INSULATING JOINTS, FLANGES, ANCHOR FLANGES AND FITTINGS

ASTM A105, A694 F60, MSS SP 75 WPHY 56, WPHY 60

FOSTER WHEELER ITALIANA

ISAB ENERGY - IGCC PROJECT - PRIOLO - ITALIA

SPIRAL WELDED PIPES, LARGGE DIAMETERS (5000 M/TONS)

API 5L GR.B

TPL

CUSIANA / CUIAGUA - FULL FIELD DEVELOPMENT PROJECT - COLOMBIA

B.W. FITTINGS, BARRED TEES

MSS SP 75; ASTM A 860 WPHY 65

ANSALDO

CENTRAL NEHUENCO - CILE

FITTINGS AND FLANGES C.S. ASTM A105 / A234 WPB

AGIP

CENTRO OLIO VAL D’AGRI (PZ) - ITALIA

PIPING - S.S. ASTM A312 TP 316L - NACE MR 01 75

STONE & WEBSTER

BRITISH GAS - TRANSCO - GAS COMPRESSION STATION - PETERSTOW - U.K.

L.T.C.S. AND HIGH STRENGTH C.S. FITTINGS AND FLANGES

A694 F65, ASTM A860 WPHY 65, A350 LF2, A420 WPL6, A333 GR.6

LG ENGINEERING C/O THAI PLASTIC AND CHEMICAL PUBLIC CO.

300,000 MPTY VCM EXPANSION PLANT RAYONG THAILAND

FORGED FITTINGS AND FLANGS

ASTM A105, A234 WPB, A350 LF2, A333 GR.6, A182 F304, F316L, F51

BROWN & ROOT LTD

RAS BUDRAN WATER INJECTION PIPELINE REPLACEMENT PROJECT - EGYPT

SMLS LINPIPE RISERS, FLANGES AND BENDS

API 5L X52, A694 F52

KALA NAFT CO. THERAN (NIOC)

TABRIZ -IRAN FURNACE TUBES - AUSTENTIC STEEL STABILIZED

ASTM A 376 TP 347H

KALA NAFT CO. THERAN (NIOC)

ARAK PETROCHEMICAL SMLS FURNACE TUBES ASTM A200T9

BECHTEL / RELIANCE

JAMNAGAR REFINERY COMPLEX

S.S. PIPES, FLANGES AND SPECTACLE BLINDS, SPADE AND SPACERS IN CARBON, LOW ALLOY AND STAINLESS STEEL

ASTM A358 TP 321 CLASS 1, ASTM A105, A182 F5, F9, F11, D22, ASTM A350 LF2, ASTM A515 GR. 70, A516 GR.70

SNAMPROGETTI - ADCO

SHAIL PROJECT SMLS C.S. PIPES ASTM A333 GR.6, API 5L X52

EIL, HALDIA

IOP - INDIA SMLS AND WELDED PIES AND FLANGES IN DIFFERENT MATERIALS

ASTM A106 GR.B, API 5L GR.B, ASTM A105, ASTMA350 LF2, ASTM A312 TP 304, TP304H, TP316L



Year of supply 1998

COCHIN REFINERY LTD.

COCHIN REFINERY - INDIA C.S. AND S.S. PIPES, SIZE 8” - 6900 METERS

API 5L GR. B, ASTM A358 TP 304 CL.1

ANSALDO

CONSORZIO EURIALO - VADO LIGURE - ITALY

FLANGES, SPECTACLE BLINDS, BOLTS, GASKETS

C.S. ALLOY STEEL AND S.S.

ANSALDO ACQUE

SAMARA C.S. FLANGES ASTM A105

STONE & WEBSTER

BRITISH GAS - TRANSCO - RGS PROJECT - LOCKERLEY

B.W. FITTINGS ASTM A234 WPB, MSS SP 75 WPHY 60, ASTM A420 WPL6

ANSALDO

ISAB - PRIOLO GARGALLO SIRACUSA ITALY-

HIGH PRESSURE GATE AND GLOBE VALVES, FLANGES, SPECTACLE BLINDS, BOLTS, GASKETS

ASTM A216 WCB, ASTM A105, AISI 316, ASTM A193 B7, A194 2H.

RELIANCE LTD

JAMNAGAR REFINERY - INDIA

S.S. PIPES, C.S. & S.S. FLANGE AND SPECTACLE BLIND, LOW ALLOY FLANGES AND B.W. FITTINGS

ASTM A312 TP 316L, ASTM A105, A285 GR.C, A515 GR. 70, A350 LF2, A234 WPB, WP11 CL.2, A182 F5, F11, F22

IOCL

MSPF PROJECT OF MATHURA REFINERY - INDIA

C.S. AND LOW ALLOY C.S. PIPES

ASTM A106 GR.B, A335

ANSALDO

VARIOUS PROJECTS: ANSCO - EGYPT BARGE - GHANA MEJILLONES - CILE AEM MONCALIERI -ITALY

C.S. AND S.S. FLANGES ASTM A105, A182 F304/316

TECHNIP

PROJECT 1908 - MODERNZATION OF FCC UNIT MOTOR OIL HELLAS

PIPES, FLANGES, VALVES, FITTINGS (B.W. AND FORGED) GASKETS

C.S. LOW ALLOY STEEL (1.25 CR - 0.5 Mo) AND S.S. ACC. TO ASTM

F.W.I. SASREF - THREMAL GASOIL UNIT / GAS TURBINE PROJECT AL JUBAIL - SAUDI ARABIA

C.S. & S.S.PIPES, FLANGES, B.W. FITTINGS GASKETS FOR STD. SERVICE ANDSOUR SERVICE

API 5L GR.B, ASTM A106 GR.B, A333 GR.6 A312 TP 304, 316, A335 P5, P11, A234 WPB, WP5, WP11, A105, A182 F5, F11, F304, F316

MTBE PROPANE DEHYDROGENATION PROJECT - KUANTAN - MALAYSIA

B.W.FITTINGS AND O’LETS IN C.S., ALLOY STEEL, STAINLESS, INCONEL, HASTELLOY

ASTM A234 WPB, WP11, A403 WP-S, WP-WX 304, 316, ASTM A105, ASTM A182 F304, F316, F11

VEBA OIL SEAMLESS LINE PIPES FOR VEBA OIL OPERATIONS - LYBIA

10000 METERS 4” 6600 METERS 12”

ASTM A106 GR.B

HELLENIC PETROLEUM

ASPROPYRGOS REFINERY INDUSTRIAL COMPLEX GREECE

SMLS TUBS ASTM A213 T5, TP 304, TP304L, TP 410, TP 316, TP 321.

PETROJET ANNUAL SUPPLY AGREEMENT P.O. 437/MMS/98 EGYPT

BARS A193 B7 – A194 2H



Year of supply 1999

ANSALDO

MIRFA - SUPERHEATER TUBES ASTM A 213 T22

ANSALDO MEJILLONES III - CILE FLANGES

ASTM A 105, A182 F11, F12, F304, F316

TECHNIP GROUP MIDOR - MIDDLE EAST OIL REFINERY - EGYPT

RIGID GALVANIZED STEEL CONDUIT PIPES

UNI 7863 ADPE - UNI 5745

CCT

ALBA BAHRAIN SEAMLESS PIPES ASME - ASTM A106 GR.B

ANSALDO

S. FILIPPO - IMP. DESOLFORAZIONE E FUMI - AIRFOILS

SEAMLESS PIPES HASTELLOY C276

VEBA OIL

SIRTICA PIPELINE REPAIRS - LIBYA

24” LINE PIPE - 12000 m S.A.W. API 5L X52

A/S STAVANGER ROERHANDEL - A/S BERGENS ROERHANDEL

SNORRE B - NORWAY WELDED PIPES, B.W. FITTINGS, SPADE & SPACERS, BRANCH FITTINGS

ASTM A 182 F316L, A358 TP 316L, A403 WP316L, B381 F2, UNS S31803

BRITISH STEEL WAHA OIL CO. - LIBYA

FITTINGS, FLANGES, ACCESSORIES

ASTM A 105, A234 WPB, B72H, UNS N08020

TUPRAS IZMIT REFINERY - SPARE PARTS

TITANIUM WITH AL FINNED TUBES

ASTM B338 GR.2

PETROJET

NPC-SUEZ - SEA WATERLINE

SEAMLESS PIPES ASTM A106 GR.B

NORTH OIL COMPANY - KIRKUK -MINISTRY OF OIL - STATE OIL MARKETING ORGANIZATION

HEATER TUBES FOR PROCESS PLANT BAGHDAD - IRAQ

SEAMLESS TUBES ASTM A161, A200 T5

ANSALDO SERVOLA, ITALY FLANGES ASTM A105

PETROJET MIDTAP - EGYPT SEAMLESS PIPES ASTM A106 B

AL QAHTANI - BECTHEL

GHAZLAND 2 POWER PLANT PROJECT

SAW AND ERW PIPES API 5L X60 IN ACC. WITH ARAMCO SPECIFICATIONS

MINISTRY OF OIL - STATE OIL MARKETING ORGANIZATION

DAURA REF. - IRAQ PIPES, FITTINGS, VALVES AND FLANGES

ASTM A106 B, A234 WPB, ASTM A 105, ASTM A 216 WCB / F6

ANSALDO ENERGIA EDISON TERNI PIPES, FITTINGS AND FLANGES

ASTM A335 P22, A 234 WPB, WP11, WP22, A105.

WTD MIDWATER - EGYPT 25 KM - LINE PIPE API 5L X52, LDPE COATED

FISIA ITALIMPIANTI - ABU DHABI NATIONAL OIL COMPANY

RUWAIS REFINERY EXPANSION PROJECT

PIPING BULK MATERIAL, CARBON STEEL AND STAINLESS STEEL

ASTM A106 GR.B , A234 WPB, UNS S31254, 317L, 316L

RASCHID PETROLEUM / ENPPI

ROSETTA FIELD DEVELOPMENT PROJECT - EGYPT

ONSHORE PIPING BULK MATERIAL

API 5L GR.B, A106 GR.B, A234 WPB, A105, A350 LF2, A358 TP 316L

F.W.I. / EXXON CHEMICAL COMPANY - SINGAPORE

ALCOHOL PROJECT STAINLESS STEEL AND DUPLEX PIPES, FITTINGS AND FLANGES

ASTM A312, A358, A790 A403, A815- TP 316/316L - UNS S31803/S32205

PETROJET ANNUAL SUPPLY AGREEMENT PO 18/MMS/99, 60/MMS/99, PO 184/MMS/99, 674/MMS/99 EGYPT

SEAMLESS PIPES , FLANGES, ELBOWS

ASTM A106 GR.B, A234 WPB, A105



Year of supply 2000

COPESUL

COMPANHIA PETROQUIMICA DO SUL- BRAZIL

SEAMLESS TUBES O.D. 76,1, 177,7, 219.1, 323.9 WITH W.TH UP TO 25 mm

DIN 2448 /17175 15Ni Cu Nb5

ANSALDO ENERGIA KOMOTINI COMBINED

CYCLE FLANGES AND STEEL STRUCTURES FOR PIPES SUPPORTS

CARBON STEEL

ANSALDO

ENICHEM BRINDISI – ITALY

STAINLESS STEEL PLATES UP TO 18 mm. (APPROX 350 TONS)

ASTM A 240 TP 316/316L

KALA NAFT CO. TEHRAN

MATERIAL FOR NIOC PLATES IN CARBON STEEL, STAINLESS STEEL, TITANIUM AND SPECIAL ALLOYS (APPROX. 250 METRIC TONS)

ASTM A240 TP 304, B171M C61400, B265 GR.2, B169 C61400

COEMSA ANSALDO BRAZIL

W02021 UHE PORTO PRIMAVERA (CESP)

STAINLESS STEEL PLATES – HEAVVY WALL (60 mm) 165 TONS

ASTM A240 TP 304L

ANSALDO ENERGIA JEBEL ALI - U.A.E. STAINLESS STEEL PLATES (W.TH UP TO 12 mm – APPROX 80 TONS)

ASTM A240 TP 316L

ANSALDO ENERGIA GAS TURBINE DEV. AND

MANUFACTURING APPROX 1600 TONS. OF C.S. AND S.S. PLATES

A 240 TP 321 ASTM A240 TP 409

PROJECT - IRAN UNITS 3, 4, 5, 6, 7, 8, 9, 10

PIPES, COILS, STRUCTURALS (200 TONS PER UNIT)

ASTM A 312 TP 316L/TP304 EN 10025 S275 JR

F.W. IBERIA TUPRAS CCR & APPROX 2000 TONS OF ASTM A 182 F11 A105 ISOMERIZATION

PROJECT – IZMIR REFINERY - TURKEY

CARBON STEEL & ALLOY STEEL PIPES FLANGES, FITTINGS AND VALVES

ASTM A 335 Gr. P11, ASTM A672 GR. A55 C55, ASTM A691 CL.22

ALLOY SEAMLESS PIPES WELDED C.S./ALLOY PIPES

N.I.G.C. S/N GAS SUPPLY PROJ. SWEEPOLET ASTM A 105 KHANGIRAN GAS 8” THRU 48” TREATING PLANT PH. 2

P.C.C. (U.K.) LTD. STRANDED ROUND ANNEALED

IEC 60502-2 04/97

For COPPER CONDUCTORS,CROSS LINKED

RATED VOLTAGE : 3.6/6 KV

SHIRAZ POLYETHYLENE INSULATION,TAPES

(MAX 7.2)

PETROCHEMICAL COPPER SCREEN,LAY-UP OF CORES

PVC SHEATH, GALVANIZED STEEL

WIRES ARMOUR,GALVANIZED STEEL

TAPE COUTERSPIRAL ,PVS SHEATH

KARACHAGANAK KAZAKSTAN APPROX. 10.000 TONS OF ASTM A 333 Gr.6 PETROLEUM KARACHAGANAK SEAMLESS AND WELDED

PIPES FOR A671 CC 60 cl.22

OPEARTING B.V. DEVELOPMENT PROJ. LOW TEMPERATURE



Year of supply 2001

ANSALDO ENERGIA GAS TURBINE DEV. AND APPROX. 800 TONS. OF A 240 TP 321 MANUFACTURING

PROJECT - IRAN UNITS 11, 12, 13, 14

S.S. PLATES PIPES, COILS, STRUCTURAL – (200 TONS PER UNIT)

ASTM A 312 TP 316L/TP304 EN 10025 S275 JR ASTM A240 TP 409

(RAW MATERIALS)

F.W.I. C/O CHEMOPETROL

POLYPROPILENE PLANT PP2 – LITVINOV – CZECH REPUBLIC

STAINLESS AND CARBON STEEL PIPES FITTINGS AND FLANGES

1.4541, ST 35.8 GR. I AND II

ENELPOWER JEBEL ALI POWER AND

DESALINATION – STATION K – PHASE II – DUBAI – U.A.E.

LARGE DIAMETER C.S. PIPES AND FITTINGS

ASTM A691 2 ¼ Cr CL. 22, API 5L GR.B, ASTM A 234 WPB, WP22

A/S BERGENS ROERHANDEL

ATTAHADDY SOC SIRTE OIL COMPANY – MARSA EL BRAGA, LIBYA

APPROX. 1000 TONS. OF C.S. SEAMLESS PIPES

ASTM A333 GR.6, API 5L GR.B

OIL INDUSTRIES ENGINEERING AND CONSTRUCTION (OIEC)

AMIRKABIR PETRPCHEMICAL COMPANY – IRAN

APPROX. 3000 TONS. OF PIPES, FITTINGS, FLANGES, FORGED AND CAST VALVES, GASKETS OVER 1000 ITEMS

ASTM A105, ASTM A216 WCB, WC6, ASTM A351 CF8, ASTM A335 P11, ASTM A234 WPB, ASTM A182 F304, ASTM A 403 WP304.

CARLO GAVAZZI IMPIANTI

CROTONE AND BANDO D’ARGENTA PLANTS - ITALY

PIPES, FORGED AND B.W. FITTINGS – CARBON AND STAINLESS STEEL

ASTM A234 WPB, ASTM A 105, ASTM A182 F316L,ASTM A 106 GR.B, ASTM A312 TP 316L, ASTM A 335 P11, ASTM A 234 WP11

KVAERNER PROCESS SYSTEM A.S.

SULPHATE REDUCTION PLANT – SELANGOR - MALAYSIA

PIPES, FLANGES AND FITTINGS – STAINLESS AND SUPER DUPLEX STEEL

ASTM A312 TP 316L, ASTM A403 WP 316L, ASTM A182 F316L, ASTM A790 UNS S32750 – UNS S32760

ENEL POWER BALLYLUMFORD CCGT

PROJECT – IRELAND UK

GALVANIZED PIPES API 5L GR.B – ASTM A153

KARACHAGANAK PETROLEUM OPERATING B.V.

KARACHAGANAK DEV. PROJECT – BOLSOI CHAGAN – ATTYRAU EXPORT PIPELINE

APPROX. 1000 TONS. OF SEAMLESS PIPES FOR LOW TEMPERATURE APPLICATION

ASTM A 333 Gr.6

OIL INDUSTRIES ENGINEERING AND CONSTRUCTION

NGL 1200 / 1300 IRAN

APPROX. 6 m. EURO SMLS AND WEDED PIPES, B.W. AND FORGED FITTINGS, FLANGES, PRESSURE BLINDS, STUD BOLTS, GASKETS OVER 4100 ITEMS IN TOTAL 26 MANUFACTURERS

ASTM A106 GR.B, ASTM A333 GR.6, A333 GR.3, A234 WPB, A420 WPL6, WPL3, A182, A312 A403 WP 304, 316, 304L, 316L.

RELIANCE INDUSTRIES

JAMNAGAR PROJECT INDIA

APPROX. 2500 TONS. OF C.S. SEAMLESS PIPES

ASTM A106 GR.B AND IBR REQUIREMENTS



Year of supply 2002

IRASCO & IRITEC AMAK PROJECT – IRAN AHWAZ 1 AHWAZ 2 AHWAZ 3 AB TEYMOUR MANSURI MARUN KUPAL PIPELINE

APPROX. 2000 TONS. OF CARBON STEEL SEAMLESS PIPES, B.W. FITTINGS, FORGED FITTINGS, FLANGES, SPECTACLE BLINDS, STUD BOLTS, STRAINERS, BARRED TEES, 6D BENDS OVER 2200 ITEMS IN TOTAL 15 MANUFACTURERS

API 5L GR.B, AND X42, A234 WPB, A105, A193 B7/2H, MSS SP 75 WPHY 42.

SICES – AEM

POWER PLANT CASSANO D’ADDA ITALY

WELDED PIPES FOR HIGH TEMPERATURE SERVICES

ASTM A691 CL.22 (A387 GR. 22 CL.2)

NE CCT

ENIPOWER 1001 ITALY

STAINLESS AND CARBON STEEL SEAMLEES SPECIAL 180° RETURN BENDS

A210 GR.1 – A312 TP 304LI

A/S BERGENS ROERHANDEL

KVITEBJORN PROJECT- NORWAY

PIPE SPOOLS ALLOY 800 MATERIAL, UNS S31803 AND UNS S31254

ALSTOM POWER PIRATININGA NO. 4 –

HRSG BOILERS - BRASIL PIPES AND B.W. FITTINGS – HEAVVY WALL

ASTM A106 GR.B, A234 WPB

ANSALDO TECNIMONT PIDEC

COOGENERATION CET3 TARANTO - ITALY EO/EG MARUN IRAN

HEAT EXCHANGER TUBES Cu/Ni (FOR SEA WATER) APPROX. 2000 TONS. AND OVER 900 ITEMS OF PIPES AND FITTINGS, SEAMLESS AND WELDED FROM ½” UP TO 54” IN CARBON STEEL, STAINLESS STEEL AND LOW ALLOY MATERIAL FOR UNDERGROUND AND ABOVE GROUND

ASTM B 111 UNS C71500, C70600 API 5L GR.B, ASTM A53 GR.B ASTM A106 GR.B, ASTM A234 WPB ASTM A312 TP 304, TP316 ASTM A105, ASTM A182 F304, F316, F11

NIOC

SHARJAH

SEAMLESS AND WELDED HIGH STRENGTH CARBON STEEL PIPES FOR SOUR SERVICE SIZES FROM 6” TO 32” – W.TH UP TO 52 mm

API 5L GR. X52 AND X60 SUITABLE FOR HIC AND SSCC

ANSALDO ENERGIA GAS TURBINE DEV. AND MANUFACTURING PROJECT - DAMAVAND IRAN UNITS 17, 18, 19, 20 (RAW MATERIAL) UNIT 13, 14, 15, 16 (EQUIPMENT)

APPROX. 1000 TONS. OF S.S. PLATES PIPES, COILS, STRUCTURAL – (200 TONS PER UNIT)

A 240 TP 321 ASTM A 312 TP 316L/TP304 EN 10025 S275 JR ASTM A240 TP 409

UMM AL-JAWABY OIL SERVICE CO. LTD

BREGA PETROLEUM LYBIA

SAFETY VALVES ASTM A216 WCB – SEATS 316

RELIANCE ENGINEERING ASS. PRIVATE LIMITED

HAZIRA NG3 - INDIA PIPES AND B.W. FITTINGS, WELDED STAINLESS STEEL SIZES FROM 6 TO 24”

TP 304 / TP 304L A312 / A403



Year of supply 2003

IRASCO & IRITEC AMAK PROJECT – IRAN AHWAZ 1 AHWAZ 2 AHWAZ 3 AB TEYMOUR MANSURI MARUN KUPAL PIPELINE

APPROX. 2500 TONS. OF CARBON STEEL SEAMLESS PIPES, B.W. FITTINGS, FORGED FITTINGS, FLANGES, SPECTACLE BLINDS, STUD BOLTS, STRAINERS, BARRED TEES, 6D BENDS OVER 2000 ITEMS IN TOTAL 15 MANUFACTURERS

API 5L GR.B, A234 WPB, A105, A193 B7/2H, A312 TP 304.

SICES / TECNIMONT MARUN JAM IRAN

COLD FINISHED PIPES FOR HEAT EXCHANGERS ON VARIOUS PROJECTS

ASTM A213 TP 304, 316, UNS S31803

PROTECMA CENTRALE DI COGENERAZIONE A CICLO COMBINATO, REGGIO EMILIA ITALY

PIPES, FITTINGS, FLANGES, BOLTS IN CARBON AND ALLOY STEEL, PEAD AND FIBERGLASS

ASTM A106, API 5L, A335 P22, A234 WPB. WP22, A193 B7/2H..

TECNIMONT / PIDEC

P.P. JAM IRAN

APPROX. 2000 TONS. AND PACKAGE CONSISTING OF APPROX. 800 ITEMS OF PIPES AND FITTINGS, SEAMLESS AND WELDED IN CARBON STEEL, STAINLESS STEEL AND LOW ALLOY MATERIAL

API 5L GR.B, ASTM A53 GR.B ASTM A106 GR.B, ASTM A234 WPB ASTM A312 TP 304, TP316 ASTM A105, ASTM A182 F304, F316, F11

ANSALDO ENERGIA GAS TURBINE DEV. AND MANUFACTURING PROJECT - DAMAVAND IRAN UNITS 17, 18, 19, 20, 21, 22, 23, 24. (RAW MATERIAL) UNIT 15, 16, 17, 18, 19, 20. (EQUIPMENT)

APPROX. 1000 TONS. OF S.S. PLATES PIPES, COILS, STRUCTURAL, FITTINGS, BOLTS, – (APPROX. 200 TONS PER UNIT)

A 240 TP 321 ASTM A 312 TP 316L/TP304 EN 10025 S275 JR ASTM A240 TP 409 A106 GR. B, A 234 WPB.

FOSTER WHEELER

POLIMERI EUROPA INTERVENTI DI SICUREZZA CRACKER PRIOLO – ITALY

LARGE DIAMETER CARBON STEEL PIPES FOR INTERMEDIATE AND LOW TEMPERATURE APPLICATION SIZES 711, 813, 914, 1016, 1067 mm.

ASTM A 671 CC60 CL.12 ASTM A 672 CC60 CL. 22

ESSO AUGUSTA (EXXON)

MODIFICA LINEA ACQUA MARE – AUGUSTA ITALY

CARBON STEEL PIPES, FITTINGS AND SPOOLS CEMENT LINED - FROM 4” NPS UP TO 30”

ASTM A106, ASTM A234 WPB, API 5L

OIEC – NIGC IGAT III – SIX GAS STATIONS IRAN

CARBON STEEL, HIGH YIELD PIPES, FITTINGS AND SPECTACLE BLINDS- SIZES FROM ½” UP TO 56”

ASTM AB60 WPHY52, WPHY65, A234 WPB, API 5L X65, GR.B PSL1 ASTM A403 WP 316L

SICES TECNIMONT / EDISON

ALTOMONTE POWER PLANT - ITALY

ALLOY PIPES, FITTINGS AND FORGED FITTINGS FOR HIGH TEMPERATURE SERVICE DESIGN TEMP. 570°C

ASTM A335 P91, A234 WP91, A182 F91

POLIMEX – SICES- TECNIMONT

MONIKA - POLAND CARBON STEEL AND LOW TEMP CARBON STEEL PIPES, FITTINGS, FLANGES, BOLTS, GASKETS

A 106 GR.B, A234 WPB, A333 GR.6, A420 WPL6, A193 B7/2H



Year of supply 2004

SADRA – A/S BERGENS ROERHANDEL

SOUTH PARS 6, 7, 8 IRAN

CARBON STEEL, LOW TEMPERATURE CARBON STEEL, STAINLESS STEEL PIPES, FLANGES, GASKETS, B.W. FITTINGS.

ASTM A106, API 5L GR.B, A234 WPB, A105, A193 B7/2H, A312 TP 304.

SADRA – A/S BERGENS ROERHANDEL

SALMAN IRAN

LINE BLINDS, GASKETS IN ALLOY 625

ASTM B564 UNS N06625

TECNIMONT - EDISON

ALTOMONTE - ITALY CARBON AND STAINLESS STEEL PIPES, FITTINGS, FLANGES; TILTING CHECK VALVES

A105, A234 WPB, A312 AND A403 TP 304/304L. A216 WCB.

TECNIMONT PETROCHINA DRCC BOREALIS RELIANCE INDUSTRIES LTD TECNIMONT PETROCHINA DRCC RELIANCE EUROPE

DAQING – CHINA POLYETHYLENE OY BORSTAR PE-4 SCHWECHAT – AUSTRIA MATERIAL FOR HAZIRA, JAMNAGAR AND PATALGANGA PROJECT LANZHOU – CHINA JAMNAGAR COMPLEX EMERGENCY FOR CPP

PIPES, FLANGES, DRIP RING, LINE BLINDS, EXPANSION JOINT, VALVES IN STAINLESS STEEL AND HIGH ALLOY SEMALESS AND WELDED PIPES, B.W. FITTINGS AND FLANGES, LATERALS SMLS CARBON STEEL PIPES PIPES, FLANGES, DRIP RING, LINE BLINDS, EXPANSION JOINT, VALVES IN STAINLESS STEEL AND HIGH ALLOY B.W. FITTINGS AND FLANGES FOR HIGH TEMPERATURE APPLICATION

ASTM B677, B673, B625, B366 UNS N08904. ASTM A333 GR.6, A 106 GR.B, A420 WPL6, A234 WPB, A403 WP 316, A105, A350 LF2, A182 F316L, F321 ASTM A106 GR.B + IBR ASTM B677, B673, B625, B366 UNS N08904. A234 WP22, WP91, A182 F22, F91

SICES

INSTALLATION OF NEW HEATING SYSTEM IN SARIR ECD PROJECT G76 - LYBIA

PIPES, B.W. AND FORGED FITTINGS, GASKETS, FLANGES, MANUAL BALL, GATE, GLOBE, CHECKVALVES.

A234 WPB, A105, A106 GR.B, API 5L GR.B, A216 WCB/F6

SIDEM / COMAR MOBIN – WATER TREATMENT PLANT

MANUAL BUTTERFLY VALVES, LUG TYPE, GLOBE, GATE, BALL AND CHECK VALVES, CENTRIFUGAL PUMPS, BLOWERS.

CAST IRON,, STAINLESS STEEL, BRONZE, STD. QUALITY



Year of supply 2005

CONOCO / PHILLIPS CHINA INC. CHINA NATIONAL OFFSHORE OIL CORP.

BOHAI PHASE II DEVELOPMENT PROJECT CHINA

FITTINGS, BOLTS AND GASKETS, RUBBER COATING OF RISER PIPES.

ASTM A193 B7/2H, ASTM A105, UNS S31803 316L

LG/ OIEC/IOEC CONSORTIUM ENPPI

SOUTH PARS PHASE 9 & 10 IRAN BURULLUS GAS COMPANY SAPHIRE CONDENSATE EXPORT PIPELINE PROJECT EGYPT

CARBON STEEL SEAMLESS PIPES PIPES, FITTINGS, FLANGES, INSULATING JOINTS, SPECTACLE BLINDS

API 5L GR.B, API TL X60, ASTM A335 P11, API 5L HOT DIPPED GALVANIZED FOR STD. AND SOUR SERVICE . API 5L GR.B, ASTM A105, A694 F52, WPB, WPHY52

SICES PETROIRAN

SALMAN SLUG CATCHER IRAN

HIGH STRENGTH B.W. FITTINGS, FLANGES, VALVES FOR SOUR SERVICE APPLICATION

WPHY 65, A69 4 F65, A105

IRASCO MOBARAKEH STEEL CO.

IRAN INSTRUMENTATION TUBES AND ASSOCIATED COMPRESSION FITTINGS / ACCESSORIES

TP 316, ST37.4

ODCC & IGC JOINT VENTURE

BANDAR ABBAS REFINERY – DEBOTTLENECKING PROJECT IRAN

SEAMLESS CARBON STEEL AND LOW ALLOY STEEL

ASTM A335 P5, A53 GR.B

ANSALDO ENERGIA CET SPARANISE ITALIA

SEAMLESS AND WELDED PIPES, FITTINGS, FLANGES IN CARBON STEEL, ALLOY STEEL AND STAINLESS STEEL

ASTM A106, A335 P22, A358 CL.1 TP 316L. A312 TP 316L, A234 WPB, A403 WP 316, A234 WP22, A182 F22, A182 F316L, A105.

ANSALDO ENERGIA CET FERRARA SEAMLESS AND WELDED PIPES, FITTINGS, FLANGES IN CARBON STEEL AND STAINLESS STEEL

ASTM A106, A358 CL.1 TP 316L. A312 TP 316L, A234 WPB, A403 WP 316, A182 F316L, A105.



Year of supply 2006

TECHINT COMPAGNIA TECNICA INDUSTRIALE

LISCO MISURATA LIBYA

SEAMLESS & WELDED PIPES, FLANGES, FITTINGS, SPADE & SPACERS, ORIFICE PLATES, RUBBER JOINTS AND FLEXIBLE HOOSE.

CARBON STEEL., BARE AND OUTSIDE BITUMEN COATED ST 35.8, P235 TR2, API 5L GR.B, DIN 1626 ST 37, WPB, AISI 316

TECHNIP – GERMANY

AMAL LIBYA

ANCHOR FLANGES, 150 LBS AND 1500 LBS

ASTM A105, ASTM A694 F52, WITH EXTERNAL COATING

PETROFAC ENGINEERING LTD

IN AMENAS GATHERING SYSTEM ALGERIA

CARBON STEEL AND STAINLESS STEEL SEAMLESS PIPES

ASTM A 333 GR.6 AND ASTM A312 TP 304L ABOUT 3000 METERS IN SIZES FROM ½’’ TO 20’’

SICES Q-CHEM, QATAR SEAMLESS PIPES AND 180 DEGREE BENDS, SPECIAL RADIUS

ASME SA 210 GR.C, SA234 WPC (APPROX 3000 TONS)

BECHTEL RELIANCE JAMNAGAR EXPORT REFINERY PROJECT 25194

LTCS AND ALLOY SEAMLESS PIPES, AUSTENITIC STAINLESS STEEL WELDED PIPES AND B.W. FITTINGS

ASTM A 333 GR.6, A335 P5, P9, P11, P22, A358 TP 321, A234 WPB, WP11, WP5, A420 WPL6

FOSTER WHEELER

KSC OL2K EG2 - KUWAIT PIPES, FITTINGS AND FLANGES IN C.S., AND LOW TEMPERATURE CARBON STEEL

ASTM A53, A106 GR.B, API 5L, ASTM A 105, A350 LF2, A420 WPL6.

SUNCOR ENERGY SERVICES INC.

FIRE IN – OILSANDS STAGE III - CANADA

LONG. WELDED C.S. PIPES API 5L PSL2 GR.B – 30’’ 2,250” W.TH

ENPPI ROSETTA PHASE III – EGYPT

BARRED TEES WPHY 60 AND WPHY 65

ANSALDO VADO LIGURE- ELECTRIC POWER PLANT

PIPES AND FITTINGS A106 GR.B, GR.C, A 234 WPB, WPC, WP22, A335 P22



Year of supply 2007INRADA N.V. – BECHTEL - RELIANCE

JAMNAGAR EXPORT REFINERY PROJECT – INDIA

SPECIAL ALLOYS PIPES, FITTINGS AND FLANGES

UNS N08020 AND UNS N06625

SUNCOR ENERGY SERVICES INC.

FIREBAG STAGE III CANADA

SPIRAL WELDED PILES, HEAVY WALL WELDED PIPES

ASTM A252 GR.3 – 1905 PCS. 17 AND 13 METER LENGTH – 12’’ NPS 30’’ AND 36’’ 2,25” AND 2,75” W.TH – API 5L PSL2 GR.B

ANSALDO RIZZICONI- ELECTRIC POWER PLANT ITALY

PIPES AND FITTINGS A106 GR.B, GR.C, A 234 WPB, WPC, WP22, A335 P22 , A312 TP 316/316L

TECNIMONT S.P.A. AROMATIC COMPLEX – SHUAIBA - KUWAIT

C.S. AND STAINLESS STEEL PIPES AND FITTINGS INCLUDING LOW ALLOY MATERIAL

ASTM A182 F11, TP 304, TP 316, ASTM A691.

TECNIMONT S.P.A. HD/LDPE AL JUBAIL – SAUDI ARABIA

C.S. PIPES ASTM A672 CL.13, GALV. HOT DIPPED TO ASTM A53 GR.B..

IRASCO WALKING BEAM - IRAN PACKAGE OF PIPES AND FITTINGS / FLANGES

STAINLESS STEEL TP 304, TP 316.

PAUL WURTH REVAMPING IN STEEL MAKING PLANT - TARANTO – ITALY

PIPES AND FITINGS SAF 2507

TECNIMONT S.P.A. PE PLANT 230 KTY – TATARSTAN - RUSSIA

PIPES AND FITTINGS STAINLESS STEEL AND ALLOY 904 L

IRASCO

BIMAK - IRAN FORGED FITTINGS AND FLANGES

CARBON AND STAINLESS STEEL

C B & I (CHICAGO BRIDGE & IRON COMPANY)

PERU’ LNG PLANT PROJECT ° 157883 LIQUEFIED NATURAL GAS - LIQUEFACTION PLANT IN PAMPA – APPROX 170 KMM SOUTH OF LIMA – PERU’ MATERIAL SUPPLIED IN JOINT VENTURE WITH CUNADO GROUP TO A CONSORTIUM COMPRISED OF: HUNT OIL COMPANY US, SK CORPORATION - KOREA, REPSOL YPF – SPAIN

LARGE BORE S.S. PIPES 30’’ TO 72’; STAINLESS STEEL FITTINGS AND FLANGES 374” TO 24’’, CPVC& HDPE PIPES, FITTINGS AND FLANGES’

ASTM A 358 TP 304/304L ASTM A 403 WP 304 / 304L, A182 F304 / F304L, ASTM D1784, D3350

IRASCO

UPPER BURDEN FEEDERS SHAFT FOR KHOROSAN DIRECT REDUCTION PLANT – IRAN

LONG. WELDED PIPES - 65 mm w.th

CARBON STEEL

SICES GROUP QATAR SHEEL GTL LTD - QATAR

PIPES & B.W. FITTINGS UP TO 24’’ FOR STEAM DRUMS

CARBON STEEL & 20 Mn, Mo, Ni, 4-5 VdTUV W.BLATT 440/3

HELLENIC PETROLEUM S.A.

ELEFIS REFINERY GREECE

PIPES AND FINNED TUBES CARBON STEEL

J&P AVAX – J&P (O) ELECTRICITY AUTHORITY OF CIPRUS 1915 – VASILIKOS POWER STATION – PHASE III – UNIT 4. CIPRUS

PIPES, FITTINGS AND FLANGES IN CARBON STEEL, STAINLESS STEEL AND ALLOY MATERIAL FOR HIGH TEMPERATURE APPLICATION

ASTM A335 P91, A234 WP91, A335 P11, A234 WP11, A182 F91, F11, A387 GR.11 ASTM A106 GR.B, ASTM A312 TP 316L, ASTM A234 WPB, ASTM A403 WP 316L

MEDITERRANEA PROGETTI

ZUETINA - LYBIA PIPES, VALVES & FITTINGS – CARBON STEEL AND GRP

GR B, BS5480

MEDITERRANEA PROGETTI

ZAWIA - LYBIA BOILER PIPES, CARBON AND ALLOY STEEL

ASTM A192 AND ASTM A213 T11



Year of supply 2008 ANSALDO BATNA – POWER

STATION - ALGERIA BULK MATERIAL – PIPES AND FITTINGS, FLANGES IN CARBON STEEL AND STAINLESS STEEL.

ASTM A106 GR.B, A234 WPB, A312 TP 316L, A403 WP 316L

IRASCO KHORASAN DIRECT REDUCTION PLANT & GHADIR DIRECT REDUCTION PLANT – IRAN

PIPES AND FITTINGS / PLATES / FLANGES AND GASKETS

ASTM A53 GR.B, API 5L GR.B, ASTM A106 GR. B, ASTM A105, ASTM A182 F316, A403 WP 316L, ROD AND PLATES IN TP 310

ANSALDO CENTRALE TERMOELETTRICA – MONCALIERI ITALY

TUBES FOR HEAT EXCHANGERS – COPPER NICKEL AND ALLUMINIUM BRASS

ASTM B111 UNS C 71500, C68700

FOSTER WHEELER

SARPOM – FCCU DEBOTTLENECKING PROJECT – REFINERY IN TRECATE – ITALY

PIPES, FITTINGS AND FLANGES IN C.S. LOW ALLOY C.S. AND AUSTENITIC STEEL

ASTM A106 GR.B, ASTM A 234WPB, WP5, A335 P5, A358 TP304/304L, A182 F5, F304/304L, A105

A.P.S. GALP – SINES REFINERY – PORTUGAL

FITTINGS, FLANGES, BOLTS AND GASKETS IN C.S. AND IN STAINLESS STEEL

A234WPB, A105, A403 WP304L, A182 F304L, A193 / A194 L7/7, B8/8, B16/4

ENPPI PDVSA / PAGMI PROJECT

PHASE I GAS TREATMENT

PIPES, FITTINGS, FLANGES, GASKETS, BOLTS AND STRAINER IN C.S. AND S.S.

A105, A106, A234WPB, A192F304 F316,

MITSUBISHI

PKN PTA PLANT - POLAND

FLANGES IN C.S. AND S.S., FORGED FITTINGS IN C.S. S.S. HASTELLOY AND TITANIUM. PLUS VARIOUS PIPING BULKS MATERIALS FOR UNDERGROUNGD

A105, A182 F316, A106, A106 GALV. A234WPB

OIEC

SOUTH PARS PHASE 17 & 18 IRAN

SEAMLESS CARBON STEEL PIPES AND ALLOY STEEL PIPES

ABOUT 4000 MTONS. API 5L GR.B PSL1/PSL2, A333 GR.6, A335 P11

SUNCOR ENERGY SERVICES

FIREBAG STAGE IV - CANADA

SPIRAL WELDED PIPES

ABOUT 3300 MTONS. A252 GR.3

IZAK BUSINESS CORPORATION (END USER TOYO – THAI) PETRA FABRICATORS SDN BHD (END USER CLOUGH AUSTRALIA)

PRESSURE VESSEL CONSTRUCTION PRESSURE VESSEL CONSTRUCTION

C.S. PLATES C.S. PLATES

A516 GR. 60 SA516 GR.70

TECNIMONT PANIPAT - INDIA C.S., LTCS, S.S., NICKEL ALLOY STEEL PIPES AND FITTINGS, S.S AND C.S. STRAINERS

ASTM A106 GR.B, ASTM A333 GR.6,, TP 304, 304L, 316L, 904L



Year of supply 2008 TECNIMONT - ICB 450 MTPD C02

RECOVERY- SITRA ISLAND – BAHRAIN

S.S. PLATES ASTM A240 /A480 TP 304

TECNIMONT MUNCHMUNSTER - GERMANY

C.S., S.S., PIPES FITTINGS, LARGE RADIUS BENDS, DISCS AND RINGS INCLUDING HOT DIPPED GALVANIZED ITEMS

API 5L GR.B, ASTM A53 GR.B, ASTM A106 GR.B, ASTM A312 TP 316L, ASTM A234 WPB, ASTM A403 WP 316L, ASTM A105, ASTM A182 F316L

TECNIMONT OMSK – RUSSI A C.S., S.S., PIPES FITTINGS, FLANGES INCLUDING HOT DIPPED GALVANIZED ITEMS, S,S. NICKEL ALLOY STEEL PIPES

API 5L GR.B, ASTM A53 GR.B, ASTM A106 GR.B, ASTM A312 TP 316L, ASTM A234 WPB, ASTM A403 WP 316L, ASTM A105, ASTM A182 F316L, ASTM A403 904L

TECNIMONT NIZHNEKAMSK – RUSSIA S.S. PIPES, FITTINGS, LATERAL TEES, FORGINGS

ASTM A403 WP 304, 304L, 316L, , ASTM A182 F304, F304L, F316L, 904L

Year of supply 2009 OIEC


WELDED CARBON STEEL PIPES AND LOW TEMPERATURE CARBON STEEL PIPES FOR STD. AND SOUR SERVICE APPLICATION ( APPROX 2300 PIPES – 18” THRU 48’’ O.D)

API 5L GR.B PSL1/PSL2, A671 CC65 CL.22

S.W.C.C. SPARE PARTS FOR SALINE WATER CONV. CORP – SAUDI ARABIA

MANUAL AND ACTUATED BALL VALVES (FROM 2’’ THRU 48’’)

ASTM A350 LF2, AISI 4140

HELLENIC PETROLEUM (FWI)

THESSALONIKI REFINERY UPGRADING PROJECT

C.S., LOW ALLOY AND S.S., PIPES FITTINGS, FLANGES BOLTS, GASKETS

API 5L GR.B, ASTM A53 GR.B, ASTM A106 GR.B, ASTM A312 TP 304, ASTM A234 WPB, ASTM A403 WP 304, ASTM A105, ASTM A182 F304, ASTM A182 F11, ASTM A234 WP11

LOTUS ENERJI FZE TURKMENBASHI REFINERY DCU & SDA PROJECT

WROUGHT FITTINGS AND FORGED FITTINGS IN LOW ALLOY, DUPLEX AND STAINLESS STEEL

ASTM A234 WP5, WP9, WP11, A815 UNS S31803, A403 WP316/316L,

W.T.D. - ROME KWAIT STAINLESS STEEL PIPES AND B.W. FITTINGS, SIZES UP TO DN 600

A312 TP 316/316L, A403 WP 316/316L



Year of supply 2010

OIEC SOUTH PARS PHASE 17 & 18 IRAN

SEAMLESS CARBON STEEL, LOW TEMPERATURE CARBON STEEL, STAINLESS STEEL PIPES. FOR STD. AND SOUR SERVICE APPLICATION

API 5L GR.B PSL1/PSL2, A333 GR.6, ASTM A312 TP 304/304L – PE COATED

E.N.P.P.I E-STYRENICS – EGYPT

PIPES, FITTINGS, FLANGES AND ACCESSORIES

API 5L GR.B, A106 GR.B, A312 TP 304/304L, 316/316L A234 WPB, A403 WP 304/304l 316/316L, A105, A182 F316/316L, A193 B7/A194 2H

GASCO SINAI LOOP – SECOND STAGE 36” GAS - EGYPT

HIGH STRENGTH FLANGES, BOLTS, NUTS AND GASKETS

ASTM A694 F52, F60, A193 B7/A94 2H

ENPPI PDVSA / PAGMI PROJECT HIGH STRENGTH PIPES & FITTINGS, 26” X 28,16 mm W.TH

API 5L X65 + ASTM A860 WPHY 65

MITSUBISHI HEAVY INDUSTRIES

TAKASAGO NUON POWER PROJECTS I B.V. DESTINATION OF MATERIAL - BELGIUM

PIPES, FLANGES AND FORGED FITTINGS IN CARBON, LOW ALLOY,AND STAINLESS STEEL

A106 GR B / GR C / A335 P11, P22, A312 TP 304/304L 316/316L , A105, A182

IRASCO KHARG ISLAND GATHERING & NGL RECOVERY PROJECT - IRAN

SEAMLESS HIGH STRENGTH CARBON STEEL PIPES FOR SOUR SERVICE APPLICATION - PE COATED – APPROX 4,5 KM SIZE 12”

API 5L X52 QS PSL2 ACCORDING CUSTOMER SPEC.


EL-DJAZAIRIA EL OMANIA LIL ASMIDA - ALGERIA OMAN FERTILISER PROJECT AOFP – ALGERIA

FORGED FITTINGS INCLUDING MATERIAL FOR UREA APPLICATION

A 182 F347 H, A105, A350 LF2, A182 F316L MOD.

IOEC


HOT FORMED, LARGE RADIUS BENDS FOR 32” LINE PIPE – SOUR SERVICE

API 5L X 65 PSL2 MODIFIED

THAI NIPPON STEEL TEPM – MOGE MYANMAR THAILAND

COMPACT FLANGES 24” 900# FOR SOUR SERVICE AND SUBSEA APPLICATION COMPLETE OF ACCESSORIES

ASTM A694 F65

I.O.O.C. RESHADAT - IRAN SHAPES AND PROFILES (HE, IPE, UNP, L)) FOR STRUCTURAL (APPROX 400 TONS)

EN 10025, EN 10219 S355 JO, S355 J2, ASTM A572 GRADE 50 WITH CHARPY TEST AT 0 AND -20°C.

GASCO TIE IN DASHOUR COMPRESSION STATION WITH NATIONAL GAS GRID OFF- TAKE TO DESHNA OFF TAKE TO QUOUS 24” GAS PIPELINE PROJECT NEW NATURAL GAS METERING AND REDUCING STATION ENPC EGYPT

FLANGES, FITTINGS, BOLTS AND GASKETS , SWEEPOLETS

DIFFERENT MATERIAL GRADES INCLUDING HIGH YELD A234 WPB, A105, A694 F52, A694 F60, MSS SP 75 WPHY 52, WPHY 60, A193 B7 A194 2H

SUNCOR ENERGY SERVICES INC

FIREBAG IN SITU PROJECT – CANADA

TRANSITION PIECES HIGH STRENGTH FORGED PCS. A694 F65

GENERAL ELECTRIC WEST QURNA WATER INJECTION PROJECT - IRAQ

SEAMLESS AND WELDED PIPES – SIZES UP TO 48’’

API 5L GR. B – S, SAWL, SAWH, EW

APS RAFFINERIA DI MILAZZO - ITALY

B.W. AND FORGED FITTINGS ASTM A 234 WPB, ASTM A 105, ASTM A224 WP 11, A182 F11

TECNIMONT PDH – TOBOLSK – TYUMEN, OBLAST – RUSSIAN FEDERATION

B.W. FITTINGS, SEAMLESS & WELDED UP TO DN 1600

ASTM A420 WPL6, B366 WPNC, A182 F304H

RADMAN / EIED / IGEDC

PARCHIN, SEMNAM, DASHT GAS COMPRESSOR STATION - IRAN

B.W. FITTINGS, FLANGES, FORGED FITTINGS AND SPADE & SPACERS

ASTM A 234 WPB, A860 WPHY 52, WPHY 6’0, A 105, A694 F52, F60



Year of supply 2011

NORTH OIL COMPANY (NOC) – IRAQ

PIPELINE - IRAQ LONGITUDINAL WELDED C.S. PIPES 16’’ AND 18’’ PIPELINE 10 KM

API 5L X52

O.I.E.C. SOUTH PARS PHASE 17 & 18 IRAN

SEAMLESS TUBES EMMUA 144 – ASTM B466 C70600

I.P.M.I. SOUTH PARS PHASE 17 & 18 IRAN

SEAMLESS CARBON STEEL, LOW TEMPERATURE CARBON STEEL, HOT DIPPED GALV C.S. PIPES. FOR STD. AND SOUR SERVICE APPLICATION

API 5L GR.B PSL1/PSL2, A333 GR.6, API 5L X60

O.I.E.C. SOUTH PARS PHASE 17 & 18 IRAN

BALL VALVES, METAL SEATS, RATING 600 # LBS AND OVER BALL VALVES FOR CRYOGENIC SERVICE

ASTM A105, ASTM A 182 F316 / ASTM A351 CF8M.

I.P.M.I. SOUTH PARS

PHASE 14 IRAN

SEAMLESS STAINLESS STEEL PIPES

ASTM A312 TP 304 AND TP 321 INCLUDING SOUR SERVICE

I.P.M.I. SOUTH PARS

PHASE 14 IRAN

FORGED FLANGES AND FORGED FITTINGS IN CARBON AND STAINLESS STEEL MATERIALS

ASTM A105, A350 LF2 CL.1, A182 F304 AND F321 INCLUDING SOUR SERVICE

TERNA . CCPP MEGALOPOLIS

UNIT V CONTRACT NO. 11 07 2251 - GREECE

SMLS. PIPES, FORGED FLANGES , SPECIAL FORGED FITTINGS (LATERAL AND Y) FORGED FITTINGS AND B.W. FITTINGS IN CARBON STEEL AND LOW ALLOY MATERIALS

ASTM A105, A234 WP11, WP22, WP91, A182 F11, F22, F91, A335 P11, P22, P91, A106

METKA . GENERAL AGREEMENT

A-15974 DEIR ALI SYRIA

SMLS. PIPES, FORGED FITTINGS AND FLANGES , B.W. FITTINGS IN CARBON STEEL AND STAINLESS STEEL INCLUDING PE COATED MATERIAL

ASTM A105, API5L, A312 TP 304, 316, A182 F304, F316, ASTM A105,

ANSALDO ENERGIA POWER STATION CAIRO ELECTRICITY PROD. CO. 6th OCTOBER - EGYPT

SMLS. CARBON STEEL, LTCS, AND STAINLESS STEEL PIPES, FITTINGS, FLANGES

ASTM A106 GR.B, A106 GR.C, A333 GR.6, A234 WPB, A420 WPL6, A105, A350 LF2, A312 TP 316L, A403 WP 316L

OMV PETROM S.A. PETROBRAZI – FOSTER WHEELER ITALIANA

DAV 2 REVAMP – ROMANIA

STAINLESS STEEL WELDED PIPES, SMLS. PIPES, FORGED FLANGES, BUTT WELD & FORGED FITTINGS IN CARBON AND ALLOY STEEL MATERIALS, SPECTACLE BLINDS, STEAM TRAPS, BATH TUBE STRAINERS, BOLTS, NUTS, GASKETS FOR STD. AND SOUR SERVICE

A106 GR.B, A335 P5, P9, A312 TP 316/316L A234 WPB, WP5, WP9, , A105, A182 F5, F9, A193 B7M/A194 2HM, EN 10269 21 CrMoV 5.7, EN10269 25 CrMo4



Year of supply 2012

ANSALDO ENERGIA POWER STATION, SOUSSE TUNISIA

SMLS CARBON STEEL AND L.T.C.S PIPES, FITTINGS,.FLANGES STAINLESS STEEL PIPES AND FITTINGS, FLANGES

ASTM A106 GR.B, A106 GR.C, A333 GR.6, A234 WPB, A420 WPL6, A105, A350 LF2, A312 TP 316L, A403 WP 316L

E.N.P.P.I / PETRO AMIR CO.

GAS HANDLING PROJECT – EGYPT

FLANGES, GASKETS, BOLTS, FITTINGS & VALVES

ASTM A694 F52, A516 GR.70, WPHY 52, A193 B7, A194 2H, A105, A216 WCB, A351 CF8M

ANSALDO ENERGIA POWER STATION GEBZE TURKEY

HIGH STRENGTH WELDED PIP’ES AND FITTINGS, SEAMLESS PIPES

API 5L X70 PSL2, MSS SP 75 WPHY 60, A106 GR.B, GR.C, A333 GR.6

APS NEW PUMPING

STATIONS OF LIGHT PRODUCTS PIPELINE (SHUAIBA-KARKH)-IRAQ

CARBON A STEEL FLANGES, B.W AND FORGED FITTINGS, STUDBOLTS, FLAME ARRESTOR

ASTM A105, ASTM A694 F60, ASTM A234 WPB.

EXXON MOBIL ESSO AUGUSTA REFINERY - ITALY

CEMENT LINED CARBON STEEL PIPES, FITTINGS AND ASSOCIATED ACCESSORIES FROM 4’’ UP TO 30’’.

API 5L GR.B, A234 WPB, A105, AWWA C205

VIETNAM NATIONAL OIL AND GAS GROUP- PETROVIETNAM ENERGY TECHNOLOGICAL CORP.

CONTRACT 05 PVEIC.TMDV VIETNAM

PIPES, FLANGES, FITTINGS, INSTRUMENTATION (PRESSURE GAUGES, THERMOMETERS, FLANGE THERMOWELL) , BOLTS & U-BOLTS

API 5L GR.B, API 5L X60, , ASTM A105, A694 F60, A193 B7, A194 2H

TECNIMONT ICB HIGH PRESSURE BOILER

& SUBSTATION #10 SITRA ISLAND BAHRAIN

PIPES, FORGED AND B.W. FITTINGS, STUB ENDS, GASKETS

A106, A403 WP 304, WP316, A234 WPB, A234 WP11, A182 F304, F316,

E.N.P.P.I, PHARAONIC PETROLEUM COMPANY PhPC

WEST HARBOUR EXPANSION PROJECT EGYPT

C.S. AND STAINLESS SMLS. PIPES, FORGED AND BW.. FITTINGS, FLANGES, SPECTACLE BLIND, HIGH PRESSURE RASTING GATE, BALL, CHECK VALVES, INCLUDING TOP ENTRY BALL VALVES

ASTM , A216 WCB, A312 TP316, A106, A333 GR.6, A234 WPB, A403 WP 316, A105, A182 F316, A479 GR 316, A350 LF2, A351 CF8M

VEOLIA WATER STI EQUIPMENT FOR EAST DELTA ELECTRICITY PRODUCTION COMPANY EGYPT

NON FERROUS FLANGES, B.W. AND FORGED FITTINGS, SMLS. PIPES

ASTM B729,UNS N08020, B366 WP20CB, B462 UNS N08020

LANCO INFRATECH LTD.

2 X 15 MW SIMPLE CYCLE POWER AL-KAZ - IRAQ

CARBON AND STAINLESS STEEL PIPES, B.W. AND FORGED FITTINGS, FLANGES, STUD BOLTS, GASKETS, Y AND T STRAINERS, FLEXIBLE HOSE, RUBBER EXPANSION JOINTS

API 5L, ASTM A106, A 312 TP 316L, A105, A182 F316L, A216 WCB, A234 WPB, A403 WP 316

RELIANCE IND. LTD GANDHAR COMPLEX INDIA

NON FERROUS B.W. FITTINGS & STUB ENDS

ASTM B366 WPN, WPN-WX UNS N02200, B366 WPNC 04400

DALIAN YUN HONG

INNER MONGOLIA 1200000 MT/YEAR DIMETHOXYETHANE – CHINA

RESTRICTION ORIFICE & RING JOINTS

HIGH NICKEL ALLOYS – UNS N04400, UNS N02200

VERGA ENG. FOR MOTOR OIL HELLAS

CORINTH REFINERIES VISBREAKER FURNACE

SEAMLESS ALLOY PIPES A335 P9



Year of supply 2013

TECNIMONT – SAMSUNG J.V.

LDPE RUWAIS EPC BOROUGE 3

C.S. & L.T.C.S WELDED PIPES API 5L GR.B, A671 C60 CL.22


TAF PROJECT FITTINGS / NIPPLES A105, A182 F304L, F316L

ANSALDO ENERGIA FOR CAIRO ELECTRICITY PRODUCTION COMPANY

GIZA NORTH & BANHA 1500 MW COMBINED CYCLE- POWER PROJECT - EGYPT

SMLS CARBON STEEL AND L.T.C.S PIPES, FITTINGS,.FLANGES STAINLESS STEEL PIPES AND FITTINGS, FLANGES ALLOY STEEL FOR HIGH TEMPERATURE SERVICE

ASTM A106 GR.B, , A333 GR.6, A234 WPB, A420 WPL6, A105, A350 LF2, A312 TP 316L, A403 WP 316L A335 P22, P91, A234WP22, WP91, A182 F22, F91

TECNIMONT (BRASKEM – IDESA SAPI)

ETILENO XXI PROJECT MEXICO

C.S. AND L.T.C.S. SEAMLESS PIPERS - APPROX 800 TONS

ASTM A106 GR.B, A333 GR.6


RSAE RUSSIA

HASTELLOY FORGED FITTINGS

ASTM B565, B622 UNS N10276

BONATTI WAFA INLET GAS

COMPRESSION STATION LYBIA

SEAMLESS & S.A.W. C.S & S.S.. PIPES, SEAMLESS & WELDED C.S. & S.S. BW FITTINGS

API 5L GR.B / A671 C60, A333 GR.6, A312 TP 316L, A358 TP 316L A234 WPB, A420 WPL6, A403 WP 316L

ARTH ALMURAD

DAURA REFINERY IRAQ

VALVES (GTE, BALL, GLOBE, CHECK, PLUG) Y-STRINERS

CARBON STEEL AND LOW TEMPERATURE CARBON STEEL, FORGED AND CASTED, COPPER ALLOY, STAINLESS STEEL AND SANICRO 28


SAMUR

UREA GRADE MATERIAL BW AND FORGED FITTINGS

ASTM A182 F316L UG, A403 WP316L UG

MASS GROUP HOLDING CAPITAL CITY INVESTMENT FOR ENKA INSAAT VE SANAYI A.S.

ERBIL COMBINED CYCLE POWER - IRAQ

SPECTACLE BLIND, RING SPACERS AND PADDLE BLIND

ASTM A516 GR.70 N

DAEKYUNG MACHINERY & ENGINEERING CO. LTD FOR SAMSUNG ENGINEERING CO. LTD

DOW FALCON USA

ALLOY COPPER NICKEL TUBES (90/10)

ASME SB111-C70620

TECNIMONT PLANUNG UND INDUSTRIEAN LAGENBAU

LDPE BRATISLAVA SLOVAKIA FOR SLOVNAFT PETROCHEMICAL

PIPE, FITTINGS AND FLANGES EN 10216/2, EN 10253/2 16Mo3

OMV EXPLORATION PACKISTAN

SAWAN GAS FIELD DEV. PROJECT

FLANGES INCLUDING ANCHOR TYPE, FITTINGS

ASTM A 694 F52, A182 F51, A105

ENPPI QASR COMPRESSION

PROJECT - EGYPT FITTINGS, FLANGES, SPECTACLE BLINDS, RING SPACERS, PADDLE BLIND, DRUIP RING, AND Y AND BATH TUBE STRAINERS AND OTHER ACCESSORIES

C.S., STAINLESS STEEL, DUPLEX

BONATTI SEPARATEUR A DOIGT

DE GANT DU CENTRE DE TREITEMENT D’HUILE DE BIR REBAA NORTH -ALGERIE

CARBON STEEL FORGED AND BW FITTINGS

ASTM A105, A234 WPB



Year of supply 2014

METKA

SAMRA III- SIGMA BLOW GREECE

CS & S.S. PIPES, FITTINGS & FLANGES

A105, A106 GR.B, A234 WPB, A403 WP 316L, A182 F316L

BONATTI RAJOUT D’UN 3emme

TURBOCOMPRESSEUR A LA STATION DE COMPRESSION TFT DU STC GR1/GR2 ALGERIA

B.W. FITTINGS, FORGED FITTINGS AND STRAINERS

MSS SP 75 WPHY 70, A694 F70, A234 WPB, A105, A403 WP 316L, A182 F316L

ENPPI QASR PROJECT

EGYPT CS., LTCS, STAINLESS AND FERRITIC ASUSTENITIC DUPLEX FLANGES, FITTINGS, GASKETS

A105, A350 LF2, A234 WPB, A420 WPL6, A182 F51, A815 UNS S31803, A403 WP316L

BONATTI TEMPA ROSSA ITALY

CASING PIPES – EXTERNALLY COATED

API 5L GR.B, X52 PSL1

corte lambruschini – torre b 16129 genova...

Documents