course syllabus department: electronics...

Course SyllabusDepartment:ElectronicsSemester 8

14/11/2011 - 06:49:38 114/11/2011 - 06:49:38 1

http://www.enseirb.fr

Course Syllabus

ElectronicsSemester 8 -

MODULE UV INTITULÉ INTERVENANTS COEF./ECTS

E8-A Micro informatics H. HENRY (Resp.) 4.50

MI201 Micro informatics H. HENRY (Resp.) 2.00 p. 46MI202 Micro informatic project Y. BORNAT

H. HENRY (Resp.)V. LEBRET

1.50 p. 47

MI203 Introduction to Operating Systems P. KADIONIK (Resp.) 1.00 p. 48

E8-B Automatic control and Signal processing M. DONIAS (Resp.)P. MELCHIOR (Resp.)

5.00

AU205 Digital control system P. MELCHIOR (Resp.) 1.50 p. 6AU208 Automatic control practical lessons 2 P. LANUSSE

P. MELCHIOR (Resp.)1.00 p. 9

TS206 Introduction to image processing Y. BERTHOUMIEU (Resp.)M. DONIASN. LASMAR

1.50 p. 54

TS208 Filter and estimation design M. NAJIM (Resp.) 1.00 p. 55

E8-C Electronics E. GARNIER (Resp.) 4.50

EA202 PLL: Principle and Applications E. GARNIER (Resp.) 0.75 p. 21EA203 Data converter circuits D. DALLET (Resp.) 0.50 p. 22EA206 Interconnections and pulsatory mode P. TESSON (Resp.) 0.75 p. 23EA212 Electronic circuits practical lessons 2 N. DELTIMPLE

P. DONDON (Resp.)V. LEBRETG. MORIZET

1.50 p. 25

EA222 Noise in the electronics components A. MABROUKI 1.00 p. 30

E8-D Optional Unit of Learning B. LE GAL (Resp.) 5.00UV au choix parmi les suivantes

E8-G Mixed Electronics and HF circuits 5.00 p. 3

E8-H Automatic Control 5.00 p. 3

E8-I Signal and image processing 5.00 p. 4

E8-J Heterogeneous digital electronic systems 5.00 p. 4

E8-E Personalized Unit of Learning P. LANUSSE (Resp.)F. RODES (Resp.)

5.00

EX200 Personalized module (1) P. LANUSSE (Resp.) 1.00 p. 34 CE200 Safety environment and sustainable development J. MARGUERAT (Resp.) p. 10

CE203 Economic intelligence C. DELESSE (Resp.) p. 12

CE210 Software law S. CANEVETF. PELLEGRINI (Resp.)

p. 14

CE215 Introduction to financial markets É. ASTIEN (Resp.) p. 16

CE219 Introduction to project management B. BERDEU (Resp.) p. 18

CE235 Sciences techniques et sociétés A. GLYKOS (Resp.) p. 19

EA214 Power electronics 2 S. AZZOPARDI (Resp.) p. 26

EA217 Advanced architecture of data converters D. DALLET (Resp.) p. 29

EX213 Module libre extérieur P. LANUSSE (Resp.) p. 36

IT221 Introductory course on programming with real-time Labview V. COUDRE (Resp.) p. 37

LC206 TOEIC Re-sit S8 P. FLOQUET (Resp.) p. 40

ME200 Nanoelectronics S. RENAUD (Resp.) p. 43

ME201 Microsystems C. DEJOUSJ. PISTRE (Resp.)

p. 44

EX201 Personalized module (2) P. LANUSSE (Resp.) 1.00 p. 35 CE200 Safety environment and sustainable development J. MARGUERAT (Resp.) p. 10

CE203 Economic intelligence C. DELESSE (Resp.) p. 12

14/11/2011 - 06:49:38 2



Course Syllabus

CE210 Software law S. CANEVETF. PELLEGRINI (Resp.)

p. 14

CE215 Introduction to financial markets É. ASTIEN (Resp.) p. 16

CE219 Introduction to project management B. BERDEU (Resp.) p. 18

CE235 Sciences techniques et sociétés A. GLYKOS (Resp.) p. 19

EA214 Power electronics 2 S. AZZOPARDI (Resp.) p. 26

EA217 Advanced architecture of data converters D. DALLET (Resp.) p. 29

EX213 Module libre extérieur P. LANUSSE (Resp.) p. 36

IT221 Introductory course on programming with real-time Labview V. COUDRE (Resp.) p. 37

LC206 TOEIC Re-sit S8 P. FLOQUET (Resp.) p. 40

ME200 Nanoelectronics S. RENAUD (Resp.) p. 43

ME201 Microsystems C. DEJOUSJ. PISTRE (Resp.)

p. 44

PR202 S8 project S. AZZOPARDIY. BORNATP. DONDONG. FERREE. GARNIERP. LANUSSEV. LEBRETR. MEGRETP. MELCHIORG. MORIZETF. RODES (Resp.)

3.00 p. 50

E8-F Languages and Management J. FAUCHER (Resp.) 6.00

CE209 Management de la performance des processuset des projets

É. ASTIEN (Resp.)R. LABAKI (Resp.)

1.50 p. 13

CE212 Quality management C. MENANT (Resp.) 0.50 p. 15CE216 Personal Project É. ASTIEN (Resp.) 1.00 p. 17LC205 English S8 K. BEIRNE

D. CHEN SEGUIP. CROCKERJ. FAUCHER (Resp.)P. FLOQUET (Resp.)M. FLORESL. HORBACHJ. MCWILLIAMS. MÉDINA (Resp.)P. WADE

2.00 p. 38

LC214 2nd Foreign Language S8 G. AGRAFOJOI. CANOYRA UBEDAM. EUGENEJ. FAUCHER (Resp.)P. FLOQUET (Resp.)F. HUMMELJ. IBANEZF. JUGELV. LEME LIOTEH. MATSUIS. MÉDINA (Resp.)A. MEDJTOUHM. RASTREROG. SCHNEIDERT. SHOCHIY. TAKAYAMAA. VELASQUEZM. YUE

1.00 p. 41

E8-G Mixed Electronics and HF circuits 5.00Option pour E8-D (p. 2)

EA201 High Speed Linear Circuits Y. DEVAL (Resp.) 1.25 p. 20EA215 RF techniques F. RODES (Resp.) 1.25 p. 27PG208 Object Oriented Programming in C++ G. FERRE

B. LE GAL (Resp.)2.50 p. 49

E8-H Automatic Control 5.00Option pour E8-D (p. 2)

AU204 Control system design A. OUSTALOUP (Resp.) 0.50 p. 5AU206 State space modeling, observation and control P. LANUSSE (Resp.) 1.00 p. 7

14/11/2011 - 06:49:38 3



Course Syllabus

AU207 Implementing control systems P. LANUSSE (Resp.)P. MELCHIOR

1.00 p. 8

PG208 Object Oriented Programming in C++ G. FERREB. LE GAL (Resp.)

2.50 p. 49

E8-I Signal and image processing 5.00Option pour E8-D (p. 2)

PG208 Object Oriented Programming in C++ G. FERREB. LE GAL (Resp.)

2.50 p. 49

TS200 Signal compression Y. BERTHOUMIEU (Resp.)M. DONIAS

1.00 p. 52

TS205 Advanced digital communication G. FERRE (Resp.) 1.00 p. 53TS221 Image processing practical lessons M. DONIAS (Resp.) 0.50 p. 56

E8-J Heterogeneous digital electronic systems 5.00Option pour E8-D (p. 2)

EN210 Advanced micro informatics H. HENRY (Resp.) 1.00 p. 31EN211 Machine to machine 0.50 p. 32EN212 Systems on programmable chips Y. BORNAT (Resp.) 1.00 p. 33PG208 Object Oriented Programming in C++ G. FERRE

B. LE GAL (Resp.)2.50 p. 49

14/11/2011 - 06:49:38 4



Course Syllabus

AU204 : Control system designShared by UV(s) :

E8-H Automatic Control p. 3

Crédits ECTS :

0.50

Number of hours :Lecture : 8.00

Teacher(s) :OUSTALOUP Alain

Title :Control system design

Abstract :This module follow AU201 (Linearizing approach and linear automatic control) and AU209 (Nonlinear systems -part 1) courses. It deals with the state space representation of the behavior of nonlinear systems and the study oftheir stability with the Lyapunov theory.

Plan :* State-space plane representation.* Definition and construction state-space trajectories.* Singular point : Definition for linear and nonlinear systems* Definition of Lyapunov stabilities.* Use of Lyapunov theorem to analyse the stability of nonlinear systems

Prerequisite :Linearizing approach and linear automatic control (AU201) and Nonlinear systems - part 1 (AU209)

Evaluation :1h20 Exam, lecture notes allowedFinal report of the lab. work

Keyword(s) :Control engineering, State-space plane method, Lyapunov stability analysis

14/11/2011 - 06:49:38 5



Course Syllabus

AU205 : Digital control systemShared by UV(s) :

E8-B Automatic control and Signal processing p. 2

Crédits ECTS :

1.50

Number of hours :Lecture : 10.66Combined lecture and tutorial classes : 8.00Individual work : 10.00

Teacher(s) :MELCHIOR Pierre

Title :Digital control system

Abstract :

Plan :

Document(s) :

Keyword(s) :

14/11/2011 - 06:49:38 6



Course Syllabus

AU206 : State space modeling, observation and control Shared by UV(s) :


Crédits ECTS :

1.00

Number of hours :Lecture : 10.66Combined lecture and tutorial classes : 8.00

Teacher(s) :LANUSSE Patrick [email protected] 05 4000 2417

http://www.enseirb.fr/~lanusse

Title :State space modeling, observation and control

Abstract :Dynamic systems are often modelled using transfert functions that take into account their input/output behavior.Unlikely, that modelling does not always permit to take into account all the internal states of the system. Thestate-space representation is an other way to model systems. It permits to save all parts of the systems. The aimof this course is to present how system could be modelled and control using the state space representation. Theobservability and controlability criterion will be used to design state observers and state feedback controllers. 8hours will permit to model a magnetic levitation system and to design an observer/controller.

Plan :* State and state-space representation of a system.* Various form of state-space representation.* Transition matrix properties.* Controllability and observability.* Design of an observer.* State feedback controller.

Prerequisite :Linear systems and linear control systems.Matrix calculus.

Evaluation :1h20 exam with lecture notesFinal report of the lab. project

Document(s) :83 page lecture notes

Keyword(s) :Control engineering, State-space representation, State-space feedback controller, Observer.

14/11/2011 - 06:49:38 7


mailto:[email protected]





Course Syllabus

AU207 : Implementing control systemsShared by UV(s) :


Crédits ECTS :

1.00

Number of hours :Combined lecture and tutorial classes : 8.00Practical work : 6.00


http://www.enseirb.fr/~lanusseMELCHIOR Pierre

Title :Implementing control systems

Abstract :-Design of a linear robust controller for a nonlinear system-Control of an electromechanical system with a strong stauration of the control effort. Analysis of the windupphenomenon and design of an antiwindup system with Matlab/Simulink.

Prerequisite :Linear control design and describing function analysis.

Evaluation :Report for both topics

14/11/2011 - 06:49:38 8







Course Syllabus

AU208 : Automatic control practical lessons 2Shared by UV(s) :


Crédits ECTS :

1.00

Number of hours :Practical work : 12.00


http://www.enseirb.fr/~lanusseMELCHIOR Pierre

Title :Automatic control practical lessons 2

Abstract :Commande d'un asservissement de vitesse avec action de préfiltrage et cahier des charge réaliste.(Manipulation sur Banc moteur à courant continu Leroy Somer 300W).

Commande en tout ou rien d'une enceinte thermique avec observation et minimisation du phénomène depompage

Synthèse fréquentielle d'un correcteur numérique à l'aide des transformations en Delta et W(bilinéaire),application à la commande numérique d'un asservissement de vitesse.

14/11/2011 - 06:49:38 9







Course Syllabus

CE200 : Safety environment and sustainable developmentShared by choice module(s) :

EX200 Personalized module (1) p. 34EX201 Personalized module (2) p. 35EX202 Modules "Cultures de l'ingénieur" (choisir 1 module exactement) p. 0EX206 If you failed the TOEIC, you have to take LC206 plus one module different

from EX205. If you pass the TOEIC: one module among:EX208,IF217,IF222,IF230,IT218, PG205 different from EX205 or twomodules among: CE200, CE203, CE207, CE210, CE215, CE219, EX203

p. 0

EX215 Optional units O82 (if TOEIC not validated, LC206+1 unit CExxx) p. 0EX216 Optional units O82 (if TOEIC validated, 3 units CExxx) p. 0

Crédits ECTS :

1.00


Teacher(s) :MARGUERAT Jean-Michel

Title :Safety environment and sustainable development

Abstract :Formation accès sur les exigences actuelles des entreprises en matière de qualité, sécurité et environnement.

Plan :La qualité, qu'est-ce ce que c'est ??Enjeux de la qualitéBases – VocabulaireRepères HistoriquesRéférentiels normatifsRéférentiels qualité : Importance de laNorme ISOLe PDCARelations clients-fournisseurs internes etexternesCommunicationQualité dans les services

Démarche qualité et normes isoPourquoi une démarche qualité ?Responsabilité de la Direction :l’organisation impliquée par une démarchequalitéPolitique, objectifs, contenu, mise en oeuvreDescriptif des Exigences ISOExigences règlementaires et légalesSystème documentaire Le système documentairequalité : manuel qualité, procédures,maîtrise des documentsRessourcesRéalisation du produitMesures & analyseProcessus de Certification : audits qualité

Qualité dans la réalisation d'un produitContrôle qualitéNotion de traçabilité

14/11/2011 - 06:49:38 10



Course Syllabus

Conception et productionContrôle, Mesures & VérificationMaîtrise de la métrologieCotation des fournisseursMaîtrise des risques

Management dans les processusApproche systèmeCartographie des processusMaîtrise des processusIndicateurs et tableaux de Bord

-----Actions d’amélioration (corrective, préventive)Méthodes de résolution de problèmesMesure de la satisfaction des clients

Mise en place d'une démarcheCertification ? Ou non ?Outils optimisés de la Qualité : systèmedocumentaire, approche processus,amélioration continue, indicateursOptimisation de la démarche par lamesure des coûtsAvenir : Démarches Qualité-Sécurité-Environnement(QSE)

Evaluation :examen

14/11/2011 - 06:49:38 11



Course Syllabus

CE203 : Economic intelligenceShared by choice module(s) :



p. 0


Crédits ECTS :

1.00


Teacher(s) :DELESSE Claude

Title :Economic intelligence

Abstract :Ce cours à pour Objectifs

- de clarifier les concepts d'intelligence économique et de sécurité globale.- de sensibiliser :- aux enjeux professionnels, géoéconomiques, scientifiques, techniques et sociétaux actuels et futurs ;- aux différentes guerres de l'information ;- aux apports de la maîtrise et de la protection des informations stratégiques- de confronter aux méthodes de l'intelligence économique ;- d'entraîner au travail en équipe

Plan :- L'intelligence économique : une politique publique.- L'intelligence économique : un mode de management- Innovation, patrimoine technologique et protection industrielle- Sécurité globale et management des risques.- Guerres de l'information et contre-intelligence- Les systèmes étrangers d'intelligence économique : Etats-Unis, Chine…

Notation :Travaux par équipes : observatoire des bonnes et mauvaises pratiques en intelligence économique etmanagement des risquesModulation de la note en fonction de la participation individuelle.

14/11/2011 - 06:49:38 12



Course Syllabus

CE209 : Management de la performance des processus et desprojets

Shared by UV(s) :E8-F Languages and Management p. 3I8-E Languages and Management p. 0M8-E Languages and Management p. 0T8-E Languages and Management p. 0

Crédits ECTS :

1.50


Teacher(s) :ASTIEN ÉricLABAKI Rania

Title :Management de la performance des processus et des projets

Abstract :Présenter les technique de calcul de coût dans le cadre d'une gestion de projet.Présenter une initiation au contrôle de gestion.

Plan :Introduction

Partie 1. Maîtrise des coûts1. La diversité des coûts2. L'analyse des coûts3. Technique de coûts complets : la méthode ABC4. Les coûts partiels5. Les coûts cibles

Partie 2. Gestion et contrôle des projets1. La notion de projet2. Particularité des projets3. La gestion des projets4. Le poiuvoir des responsables projet5. le suivi des projets

Prerequisite :Gestion comptable

Evaluation :Simulation + Examen de 1h20

Document(s) :Sans document, ni calculatrice

14/11/2011 - 06:49:38 13



Course Syllabus

CE210 : Software lawShared by choice module(s) :



p. 0


Crédits ECTS :

1.00

Number of hours :Lecture : 12.00Individual work : 8.00

Teacher(s) :CANEVET SébastienPELLEGRINI Francois

Title :Software law

Abstract :The aim of this class is to familiarize students with the main legal notions used in the computer programmingsector, the relevant laws, and their impact on the technical side, in order for them to be able to integrate theseaspects in their engineering practice.

Plan :- Author's right and copyright- The adaptation of author's right to software- Licenses and contracts- Main types of licenses- Interoperability- Contracts for software development- Incongruity of software patents

Prerequisite :Basic notions in computer programming, software development and operating systems: source code vs. objectcode, compilation vs. interpretation, main features of an operating system, operations of Internet.

Evaluation :This module is evaluated by the submission of a short report.

Document(s) :Numerous reference resources available on the Internet: laws, licenses, etc.

Keyword(s) :law, copyright, software, license, trade mark, data base, patent.

14/11/2011 - 06:49:38 14



Course Syllabus

CE212 : Quality managementShared by UV(s) :

E8-F Languages and Management p. 3I8-E Languages and Management p. 0M8-E Languages and Management p. 0T8-E Languages and Management p. 0

Crédits ECTS :

0.50


Teacher(s) :MENANT Christophe

Title :Quality management

Abstract :Démarche qualité et management dans l'entreprise et la conception des produits

Evaluation :Examen de 0h30 (QCM)

Document(s) :Sans document, ni calculatrice

14/11/2011 - 06:49:38 15



Course Syllabus

CE215 : Introduction to financial marketsShared by choice module(s) :



p. 0


Crédits ECTS :

1.00


Teacher(s) :ASTIEN Éric

Title :Introduction to financial markets

Abstract :Initiation aux mécanismes de finance de marché.Pré requis pour intégrer l'option de 3ème année IRE

Plan :* Partie 1 : le marché monétaire* Partie 2 : Le marché obligataire* Partie 3 : la bourse des valeurs mobilières* Partie 4 : la couverture des risques

14/11/2011 - 06:49:38 16



Course Syllabus

CE216 : Personal Project Shared by UV(s) :


Crédits ECTS :

1.00

Number of hours :Individual work : 20.00

Teacher(s) :ASTIEN Éric

Title :Personal Project

Abstract :http://uuu.enseirb.fr/~astien/CREGE/documents/dossier%20manager/index.htm

Evaluation :Soutenance

14/11/2011 - 06:49:38 17



Course Syllabus

CE219 : Introduction to project managementShared by choice module(s) :



p. 0


Crédits ECTS :

1.00


Teacher(s) :BERDEU Bernard

Title :Introduction to project management

Abstract :Products complexity shortened time-to market delivery, search for resources optimization are reasons whyorganizations increasingly resort to management by project. The course introduces the notion of project, themanagement tools and techniques used to master it, and the human and social dimensions inherent to anyproject.

Plan :1. Différentes natures de projets ; Cycles de vie ; Définition d’un projet. Planning et Analyse.

2. Evaluation et Management des risques dans les projets

3. Dimension sociale du management de projet

4. Gestion de projets : Représentation des projets, Détermination des durées, gestion des moyens, analyse descoûts et performances.

5. Projet organisationnel et Conduite du changement

Evaluation :Examen 1 heure

Document(s) :Sans documents

Keyword(s) :projet, management de projet

14/11/2011 - 06:49:38 18



Course Syllabus

CE235 : Sciences techniques et sociétésShared by choice module(s) :



p. 0


Crédits ECTS :

1.00


Teacher(s) :GLYKOS Allain

Title :Sciences techniques et sociétés

Abstract :Le but de cet enseignement est de

1. montrer que la technique est au coeur d'un conflit de pouvoir entre la volonté de contrôle des dirigeants et dedétournement du contrôle par les populations.

2. définir la notion de système technique (théorie de Bertrand Gille, Thierry Gaudin), d'identifier les événementstechniques et scientifiques qui déstabilisent les sociétés. Structuration du temps, représentation de l'espace,émergence de nouveaux matériaux, de nouvelles sources d'énergie, de nouvelles relations au vivant.

3. resituer la notion d'intelligence artificielle dans l'histoire et par rapport aux grandes figures mythiques(Pygmalion, Golem, Automates, Frankenstein, etc.).

4. revisiter le concept de progrès à la lumière des nouvelles technologies et leurs enjeux sociaux et culturels(philosophique, religieux, économiques, etc.)

Plan :1. Technique : contrôle et délinquance2. Notion de système technique3. Enjeux culturels de l'intelligence artificielle4. La notion de progrès

14/11/2011 - 06:49:38 19



Course Syllabus

EA201 : High Speed Linear CircuitsShared by UV(s) :

E8-G Mixed Electronics and HF circuits p. 3

Crédits ECTS :

1.25

Number of hours :Lecture : 12.00Tutorial classes : 1.20Practical work : 6.00

Teacher(s) :DEVAL yann

Title :High Speed Linear Circuits

Abstract :Objective :To investigate the limits of classical opamps and introduce the various designs and performance of new highspeed opamps.

Plan :Summary:

*Ch.1: Limitation of classical opamps, limitations due to the design and technology, gain-bandwidth product,compensation, Miller capacitor, Slew-rate, CMRR, filters; active and passive sensitivities.

*Ch. 2: High speed opamps; principle, schematics, characteristics, performance, stability.

*Ch. 3: Current feedback opamps (CFOA); principle, schematics, characteristics, performance, bandwidth ,Slew-rate .

*Ch. 4: Voltage feedback opamps (VFOA); principle, schematics, characteristics, performance, bandwidth ,Slew-rate .

*Ch. 5: Operational Transconductance Amplifiers (OTA), principle, schematics, equivalent circuit, characteristics,application examples, controlled elements, filters

*Ch. 6: SC filters, state variable filters, simulated resistances, controlled integrator, controlled filter examples.

Prerequisite :UV Electronique Fondamentale (S1 et S2)UV Electronique linéaire (S3)

Evaluation :Epreuve écrite de 1H.couplée a celle du module EA223

Document(s) :Cours Polycopié

14/11/2011 - 06:49:38 20



Course Syllabus

EA202 : PLL: Principle and ApplicationsShared by UV(s) :

E8-C Electronics p. 2

Crédits ECTS :

0.75


Teacher(s) :GARNIER Eliane

Title :PLL: Principle and Applications

Abstract :This course focuses on principle and linear behavior of PLL in the first place, next, non linear effects andapplications.

Plan :*Ch1: Introduction, capture and locked plages*Ch2: Phase comparators; linear behavior and limitations*Ch3: Loop filter and specifications of PLL*Ch4: Applications*Ch5: Conclusion

Prerequisite :Electronique générale (S1 et S2)Electronique Analogique (S3)Traitement du signal (S3)Electronique des Transmissions (S3)Communications Numériques (S3)

Evaluation :Examen écrit de 1H ( Avec les documents)

Document(s) :Support de cours

Keyword(s) :Mixer, PLL, VCO, Discriminateur, Asservissement

14/11/2011 - 06:49:38 21



Course Syllabus

EA203 : Data converter circuitsShared by UV(s) :


Crédits ECTS :

0.50

Number of hours :Lecture : 2.66Tutorial classes : 4.00

Teacher(s) :DALLET Dominique

Title :Data converter circuits

Abstract :This course details data converter architectures, either Analog-to-Digital or Digital-to-Analog (ADC or DAC).

Plan :o Digital-to-Analog converters (DAC)° Parameters and specifications° Basic architectures° Advanced architectureso Analog-to-Digital converters (ADC)° Parameters and specifications° Basic architectures° Advanced architectures

Prerequisite :Electronique générale (S1 et S2) - Electronique linéaire(S3) - Circuits de commutation(S3)

Evaluation :Epreuve écrite de 0H30 sans les documents

Document(s) :Polycopiés de cours

14/11/2011 - 06:49:38 22



Course Syllabus

EA206 : Interconnections and pulsatory modeShared by UV(s) :


Crédits ECTS :

0.75

Number of hours :Lecture : 8.00Practical work : 4.00

Teacher(s) :TESSON Patrice

Title :Interconnections and pulsatory mode

Abstract :Savoir dans le cas où ils doivent être pris en compte, quantifier et analyser l'impact des principaux phénomènesde propagation mis en jeux dans les interconnexions des systèmes électroniques numériques et mixtes, etnuisant à l'intégrité des signaux :

- Retards de propagation

- Atténuations et distorsions linéaires d'amplitude et de phase.

- Réflexions multiples dues aux ruptures d'impédance en particulier sur terminaisons linéaires et nonlinéaires.

- Diaphonie

Savoir mener une étude à partir de méthodes théoriques, expérimentales et numériques en particulier unesimulation dans le cadre de la CAO.

Plan :*Chapitre 1 : Généralités sur les interconnexions

- 1 Introduction- 2 Hiérarchie du packaging. Technologies d'interconnexions- 3 Les phénomènes de propagation doivent-ils être pris en compte ?- 4 Définition électromagnétique d'une ligne. Modélisation

*Chapitre 2 : Etude des phénomènes de propagation dans une ligne simple.- 1 Equations de télégraphiste dans le domaine temporel.- 2 Equations de propagation dans les domaines symbolique et fréquentiel.- 3 Modèlisation d'une ligne sous SPICE

4 Etude de cas. Stratégie d'adaption.*Chapitre 3 : Propagation sur les lignes couplées

- 1 Généralités. Position du problème- 2 Modélisation et mise en équation.- 3 Résolution des équations en vue de la simulation sous SPICE. Décomposition modale.- 4 Cas de deux lignes en couplage lâche.- 5 Etude de cas.

Evaluation :Epreuve écrite de 1h avec documents associé à celui du module EA202( examen de 1H. également)

14/11/2011 - 06:49:38 23



Course Syllabus

Document(s) :Polycopiés de cours et d'exercices.

14/11/2011 - 06:49:38 24



Course Syllabus

EA212 : Electronic circuits practical lessons 2Shared by UV(s) :


Crédits ECTS :

1.50


Teacher(s) :DELTIMPLE NathalieDONDON PhilippeLEBRET ValeryMORIZET Guy

Title :Electronic circuits practical lessons 2

Abstract :5 pratical lessons in parallel

Plan :1. Phase locked Loop 22. AM modulations demodulation3. switched capacitors filters4. Power converter5.FM Modulation/ Demodulation

Evaluation :written report

Document(s) :on line courses http://www.enseirb.fr/~dondon

14/11/2011 - 06:49:38 25



Course Syllabus

EA214 : Power electronics 2Shared by choice module(s) :

EX200 Personalized module (1) p. 34EX201 Personalized module (2) p. 35

Crédits ECTS :

1.00


Teacher(s) :AZZOPARDI Stéphane

Title :Power electronics 2

Abstract :Provide to the audience the basic requirement to design a power system

A overview of the transformer modelling and his application to a pulse tramission circuit allows to understand theapproch of the energy isolated conversion. The main isolated DC-DC converters are studied. Some powersemiconductors are analysied as well as their control and protection circuits. A short description of the basicSwitching Mode Power Supplies is propopsed. Finally the basics of the dynamics modelling of DC-DC convertersare detailed.

Plan :* Ch. 1 : Transformers (basics, simple model, design, pulse transmission)* Ch. 2 : Isolated DC-DC converters (flyback, forward, push-pull..)* Ch. 3 : Power semiconductors (internal structure, characteristics : Thyristors, IGBT)* Ch. 4 : Control circuit and protection of power semiconductors (snubbers, soft-switching)* Ch. 5 : Switching Mode Power Supplies examples* Ch. 6 :An introduction to the dynamics modelling of DC-DC converters

Prerequisite :Power Electronics 1

Evaluation :2h exam with documents

Document(s) :Lecture material/ Power Electronics, Mohan, Undeland, Robbins / Alimentations à découpage (2ème édition),Michel Girard, Hugues Angelis, Magali Girard, DUNOD, 2003, ISBN 2-1000-6940-3/ Techniques de l'Ingenieur

Keyword(s) :Isolated DC-DC converters, transformers, control circuits, protection circuits, dynamics modelling

Online course :www.enseirb.fr/~azzopard

14/11/2011 - 06:49:38 26



Course Syllabus

EA215 : RF techniquesShared by UV(s) :

E8-G Mixed Electronics and HF circuits p. 3

Crédits ECTS :

1.25


Teacher(s) :RODES Francis

Title :RF techniques

Abstract :Electronic circuits and systems are working at frequencies that rise at an accelerated pace. For instance, one canobserve the sustained rise of the clock frequencies of computers and digital circuits. Consequently it becomesobvious nowadays that an electronic engineer should acquire some basic expertise in High Frequencytechniques. The main objective of this course is to fulfil this need by presenting the various basic knowledge andtechniques that are useful for designing High frequency circuits and systems (mainly, radio communicationssystems). From a pedagogic point of view, this course brings some complementary information to the courses:Mixed Electronic and RF circuits (UVE4Ba). Moreover, it constitutes a theoretical basis for the electronic designprojects of S3 and S4 and a recommended prerequisite for attending the various courses that are proposed in S5in the field of analogue electronic. (Particularly the projects of RF circuits design).

Plan :-RF units.-Quality factor Q, general definition and RF applications.-Power matching strategies.-Noise, noise matching.-Impedance matching with lumped elements:-Matching with analytical methods-Matching with analytical methods (Smith chart)-Matching with the help of CAE/CAD software tools (Smith Tool / Ansoft Designer)-From the concept of power matching to the principle of S parameter of a dipole-Extension to the Sij parameters of a quadripole-Theoretical network analysis with Sij parameters-Application of the Sij parameters to the design of oscillators; relation with the negative resistance method.-Graphical network analysis with the flow graph and Sij parameters.-Application of the Sij parameters to the design of linear amplifiers.-Extension conditions of the Sij parameters to non linear power devices.-Sij parameters measurement, the calibration issue.-Practical work/Project : Design of the matching networks of a linear amplifier with the aid of AnsoftDesigner’s Smith Tool.

Prerequisite :UV1 (1° A) : Analog Electronic, UV5 (2° A) : Module digital communications, UV11(2° A) : Integrated AnalogElectronic , Module circuits and systems of analog communications.

Evaluation :

14/11/2011 - 06:49:38 27



Course Syllabus

A project report

Document(s) :Power transmission, impedance matching.Introduction to S parameters.Tutorials of software tools: ANSOFT DESIGNER, SMITH TOOL.CD ROM's of software tool: ANSOFT DESIGNER, (Student Version)

Keyword(s) :RF, power matching, noise matching, impedance matching, Smith chart, S parameters, oscillator, amplifier, VNAcalibration

14/11/2011 - 06:49:38 28



Course Syllabus

EA217 : Advanced architecture of data convertersShared by choice module(s) :


Crédits ECTS :

1.00


Teacher(s) :DALLET Dominique

Title :Advanced architecture of data converters

Abstract :Il est de plus ne plus difficile de réaliser des circuits de conversion de données à la fois rapide (fréquenced'échantillonnage) et précis (résolution). Le concepteur en électronique analogique et mixte préfère relâcher unede ces contraintes, au détriment des performances associées à ces contraintes. Il fera ensuite appel à desspécialistes en traitement du signal et en électronique numérique pour proposer des méthodes de compensationafin d'atteindre les performances optimales. C'est cette dernière partie qui sera traitée dans ce module.

Prerequisite :Circuit de conversion de données, traitement du signal

14/11/2011 - 06:49:38 29



Course Syllabus

EA222 : Noise in the electronics componentsShared by UV(s) :


Crédits ECTS :

1.00

Number of hours :Combined lecture and tutorial classes : 10.66

Teacher(s) :MABROUKI Aya

Title :Noise in the electronics components

Abstract :After reviewing basic mathematic tools dedicated to noise analysis, this course describes noise source origins andtheir analytic expression forms. Noise modelling of basic electronic devices is so set up. The remaining part of theteaching is oriented to noise analysis of elementary analog circuits.

Evaluation :Examen écrit de 1H30 avec documents

14/11/2011 - 06:49:38 30



Course Syllabus

EN210 : Advanced micro informaticsShared by UV(s) :

E8-J Heterogeneous digital electronic systems p. 4

Crédits ECTS :

1.00


Teacher(s) :HENRY Hervé

Title :Advanced micro informatics

14/11/2011 - 06:49:38 31



Course Syllabus

EN211 : Machine to machineShared by UV(s) :


Crédits ECTS :

0.50


Title :Machine to machine

14/11/2011 - 06:49:38 32



Course Syllabus

EN212 : Systems on programmable chipsShared by UV(s) :


Crédits ECTS :

1.00


Teacher(s) :BORNAT Yannick

Title :Systems on programmable chips

Abstract :This module is an introduction to system design on FPGAs. The students are faced to the different issues thatoccure when mixing hardware and software modules in a single desing

Prerequisite :VHDL

Evaluation :project with report evaluation

Document(s) :VHDL and processor descriptions, software suite for software assembly

14/11/2011 - 06:49:38 33



Course Syllabus

EX200 : Personalized module (1)Shared by UV(s) :

E8-E Personalized Unit of Learning p. 2

To choose from :CE200 Safety environment and sustainable development p. 10CE203 Economic intelligence p. 12CE210 Software law p. 14CE215 Introduction to financial markets p. 16CE219 Introduction to project management p. 18CE235 Sciences techniques et sociétés p. 19EA214 Power electronics 2 p. 26EA217 Advanced architecture of data converters p. 29EX213 Module libre extérieur p. 36IT221 Introductory course on programming with real-time Labview p. 37LC206 TOEIC Re-sit S8 p. 40ME200 Nanoelectronics p. 43ME201 Microsystems p. 44

Crédits ECTS :

1.00




Title :Personalized module (1)

14/11/2011 - 06:49:38 34







Course Syllabus

EX201 : Personalized module (2)Shared by UV(s) :


To choose from :CE200 Safety environment and sustainable development p. 10CE203 Economic intelligence p. 12CE210 Software law p. 14CE215 Introduction to financial markets p. 16CE219 Introduction to project management p. 18CE235 Sciences techniques et sociétés p. 19EA214 Power electronics 2 p. 26EA217 Advanced architecture of data converters p. 29EX213 Module libre extérieur p. 36IT221 Introductory course on programming with real-time Labview p. 37LC206 TOEIC Re-sit S8 p. 40ME200 Nanoelectronics p. 43ME201 Microsystems p. 44

Crédits ECTS :

1.00




Title :Personalized module (2)

14/11/2011 - 06:49:38 35







Course Syllabus

EX213 : Module libre extérieurShared by choice module(s) :


Crédits ECTS :

1.00



Title :Module libre extérieur

Abstract :Ce module peut concerner des activités d'encadrement, de pratique sportive ou culturelle de bon niveau ou deformation, non déjà prises en compte dans le processus d'évaluation propre à l'Ecole. Son choix est conditionnerà un accord du responsable pédagogique de 2ème année. Ce module est évalué à travers un rapport décrivantl'activité concernée ainsi que ses connections avec la future fonction d'ingénieur.

Evaluation :Compte rendu.

14/11/2011 - 06:49:38 36







Course Syllabus

IT221 : Introductory course on programming with real-timeLabview

Shared by choice module(s) :EX200 Personalized module (1) p. 34EX201 Personalized module (2) p. 35

Crédits ECTS :

1.00

Number of hours :Tutorial classes : 18.00

Teacher(s) :COUDRE Vincent

Title :Introductory course on programming with real-time Labview

Abstract :L'objectif du cours est l'initiation à la programmation Labview (National Instrument) permettant la gestioninteractive d'applications automatisées. Une attention plus particulière sera portée sur les applications nécessitantayant des contraintes de temps-réel comme celles implémentant des boucles de commande.

Prerequisite :Aucun pré-requis

14/11/2011 - 06:49:38 37



Course Syllabus

LC205 : English S8Shared by UV(s) :


Crédits ECTS :

2.00

Number of hours :Tutorial classes : 26.00Individual work : 15.00

Teacher(s) :BEIRNE KennethCHEN SEGUI DianneCROCKER PaulFAUCHER JillFLOQUET PierreFLORES ManuelHORBACH LeonardMCWILLIAM JamesMÉDINA SusanWADE Phil

Title :English S8

Abstract :-An approach to English speaking cultures-Intercultural awareness

Plan :-Societies-Education-Literature-Cultural exchange via webcam-Film

Evaluation :Continuous assessment based on active participation, oral presentations and written assignments

Document(s) :-Extracts from TV documentaries, internet and film-Extracts from literature from the English-speaking world

Keyword(s) :Active participation - Critical analysis - Creativity

14/11/2011 - 06:49:38 38



Course Syllabus

Online course :See the Language Resource Centre web site :http://www.enseirb-matmeca.fr/extranet/fr/%C3%A9tudiants/centres-de-ressources/crel/anglais/s4

14/11/2011 - 06:49:38 39



Course Syllabus

LC206 : TOEIC Re-sit S8Shared by choice module(s) :



p. 0

EX215 Optional units O82 (if TOEIC not validated, LC206+1 unit CExxx) p. 0

Crédits ECTS :

1.00


Teacher(s) :FLOQUET Pierre

Title :TOEIC Re-sit S8

Abstract :-Continuing work on the TOEIC-Compulsory for students who have not yet obtained the required score (750 points TOEIC promo 2011 et2012)

Plan :-Listening skills-Grammatical accuracy-Reading skills-International business context

Evaluation :Assessment is based on presence and progress.

Document(s) :-Language learning software: TOEIC Simulator, Voicebook, Audioster.

Keyword(s) :-B2 level on the Common European Framework (CEF) http://culture2.coe.int/portfolio

Online course :See the Language Resource Centre web site :http://www.enseirb-matmeca.fr/extranet/fr/%C3%A9tudiants/centres-de-ressources/crel/anglais/s3-toeic

14/11/2011 - 06:49:38 40



Course Syllabus

LC214 : 2nd Foreign Language S8Shared by UV(s) :


Crédits ECTS :

1.00


Teacher(s) :AGRAFOJO GeneCANOYRA UBEDA IsmaelEUGENE Marie PierreFAUCHER JillFLOQUET PierreHUMMEL FraukeIBANEZ JorgeJUGEL FranjoLEME LIOTE VivianeMATSUI HiroshiMÉDINA SusanMEDJTOUH AliRASTRERO ManuelSCHNEIDER GabrieleSHOCHI TakaakiTAKAYAMA YukimiVELASQUEZ AdelaYUE Martin

Title :2nd Foreign Language S8

Abstract :-Levels of competence and activity corresponding to A2-B2 (Common European Framework) in thelanguage chosen in Year 1 and continued in S3 .-Level groups are maintained.-Culture and civilisation

Plan :Consolidating skills - Vocabulary and idiomatic expressions - Oral presentations

Prerequisite :S5, S6, S7 and S8 in the same language

Evaluation :-Continuous assessment based on active participation and assignments (2/3)-Final exam (1/3)

14/11/2011 - 06:49:38 41



Course Syllabus

Document(s) :- Course book chosen by the teacher and provided by ENSEIRB- Video and audio material, the press- Language learning software

Keyword(s) :Developing Grammar and Vocabulary - A2-B2 Languages skills - Active participation

Online course :See the Language Resource Centre web site : http://www.enseirb.fr/extranet/fr/etudiants/ressources/crel

14/11/2011 - 06:49:38 42



Course Syllabus

ME200 : NanoelectronicsShared by choice module(s) :


Crédits ECTS :

1.00

Number of hours :Tutorial classes : 18.00

Teacher(s) :RENAUD Sylvie

Title :Nanoelectronics

Abstract :This course includes 6 practical labs. All are conducted in a microelectronics research unit. During each lab, thestudents participate in the design, or characterization of nano-components: VLSI, MEMs, organic components,power devices.

Evaluation :Final questionary

14/11/2011 - 06:49:38 43



Course Syllabus

ME201 : MicrosystemsShared by choice module(s) :


Crédits ECTS :

1.00

Number of hours :Combined lecture and tutorial classes : 12.00Individual work : 12.00

Teacher(s) :DEJOUS Corinne [email protected] JACQUES [email protected] 0556846508

http://www.enseirb.fr/~pistre

Title :Microsystems

Abstract :This class is divided into three parts: A general presentation of microsystems, a presentation of the technologiesimplemented and a projection towards nano-sciences and nano-technologies. A workout is proposed. Theseexercises pertain to physics and also electronic circuits specific to microsystems. They are in close relationshipwith existing objects.

Plan :MICROSYSTEMS_______

Contents

THE WORLD OF MICROSYSTEMS-Introduction (definition, historic, examples, the market)-Towardsminiaturization (examples, why, the concept)-Microsystem and microtechnologies-The dimensions-A selfcontained component-Microsystems and interdisciplinarity-Microsystem structure-Some importantmilestones-Examples : Accelerometers, Adaptative optics, Ink jet printers, Insulin dispensers, lab on chip, DNAbiochip-The market-Economic data-Distribution-Car industry-Medical-Evolution-Industrial activity-Bibliography.

MICROSYSTEM TECHNOLOGIES-Manufacturing sequence-Specificities-Lithography-Double sidealignments-Etching-Bulk micro machining-Surface micro machining-Bonding-Activematerials-Examples-PolyMUMPS technology-Electrostatic micro engine-SUMMIT V technology-Microengines-Micro gears-Mechanical transmissions-Hinges-Mobile micro mirrors.

NANO SCIENCES AND NANO TECHNOLOGIES Diaporama

EXERCISES- Pressure sensor-Acceleration sensor-Integrated temperature sensor-Nickel probe linearization-Ttype thermocouple with 4-20mA connection-AD590 temperature sensor-Acoustic and optictelemeters-Electrostatic telemeter-Actuator miniaturization-Microcantilevers-Variable capacity microengine-Electrostatic actuation.

Prerequisite :Bases on integrated circuit-Electricity, mechanics, optics, thermics (bachelor level)

Evaluation :

14/11/2011 - 06:49:38 44









Course Syllabus

1/2 hour oral presentation on a topical subject

Document(s) :Books and Journals of the domain

Keyword(s) :Microsystems Microtechnologies Nanosciences

Online course :Some details available at http://www.enseirb.fr/~pistre

14/11/2011 - 06:49:38 45



Course Syllabus

MI201 : Micro informaticsShared by UV(s) :

E8-A Micro informatics p. 2

Crédits ECTS :

2.00

Number of hours :Lecture : 20.00Tutorial classes : 10.00

Teacher(s) :HENRY Hervé

Title :Micro informatics

Abstract :INTRODUCTION : Historique - Situation actuelle - Perspectives

STRUCTURE GENERALE D'UN SYSTEME A MICROPROCESSEUR : Module et système modulaire - Modulesd'un système informatique - Comparaison des liaisons entre modules - Divers types de bus - Exemple d'unsystème à bus complexes

ETUDE DES BUS : Liaisons unidirectionnelles - Liaisons bidirectionnelles - Sens de transfert sur un busbidirectionnel - Normalisation de l'écriture des variables - Conception des bus bidirectionnels - Capacité d'un bus -Débit d'un bus - Paramètres statiques des liaisons - Paramètres dynamiques des liaisons - Etude statique d'uneligne bus à trois états - Etude dynamique du troisième état - Commande des lignes bus bidirectionnelles - Lignesbus à haute vitesse

UNITE CENTRALE : Programmation de l'unité centrale - Déroulement d'une instruction machine - Synchronisme- Organisation des données en mémoire - Organisation des instructions en mémoire - Protection des accèsmémoire - Les cycles machines - Les exceptions - Les exceptions matérielles ou interruptions

MEMOIRE : Les différents types de mémoire - Cycles d'une mémoire vive statique - Cycles d'une mémoire vivedynamique - Décodage mémoire - Association processeur - Mémoire - Mémoires spécialisées

14/11/2011 - 06:49:38 46



Course Syllabus

MI202 : Micro informatic projectShared by UV(s) :


Crédits ECTS :

1.50


Teacher(s) :BORNAT YannickHENRY HervéLEBRET Valery

Title :Micro informatic project

Abstract :PROGRAMME DU STAGE : Cours de langage assembleur sur microprocesseur de la famille 68000 - Travauxdirigés d'exercices de program-mation - Applications des programmes et manipu-lations sur des kits 68 000.

DEROULEMENT DU STAGE : Le stage se déroule sur deux semaines - Des kits sont prêtés aux élèves.

VALIDATION DES ACQUIS : Immédiatement après le stage, un contrôle écrit des connaissances termine cettepartie d'enseignement de la micro-informatique.

(récupéré d'un document de 1996)

14/11/2011 - 06:49:38 47



Course Syllabus

MI203 : Introduction to Operating SystemsShared by UV(s) :


Crédits ECTS :

1.00


Teacher(s) :KADIONIK Patrice

Title :Introduction to Operating Systems

Plan :- Introduction.- General interests of an OS.- Definitions.- OS Classification.- Multitasking OS conception: HW contrainsts.- General Features of a multitasking OS.- Advanced Features of a multitasking OS.- * NIX OS.- Interprocess communications: fork, exec, signals and pipes.- Interprocess Communications: System V IPC- Conclusion.

Prerequisite :C Language.*NIX Environment.

Evaluation :Practical exercice Report.

Document(s) :Course Material.

Keyword(s) :C Language, *NIX, fork, exec, signals, pipes, System V IPC.

14/11/2011 - 06:49:38 48



Course Syllabus

PG208 : Object Oriented Programming in C++Shared by UV(s) :

E8-G Mixed Electronics and HF circuits p. 3E8-H Automatic Control p. 3E8-I Signal and image processing p. 4E8-J Heterogeneous digital electronic systems p. 4

Crédits ECTS :

2.50


Teacher(s) :FERRE GuillaumeLE GAL Bertrand

Title :Object Oriented Programming in C++

Abstract :In this course, object-orientation is introduced as a new programming concept which should help you indeveloping high quality software. Object-orientation is also introduced as a concept which makes developing ofprojects easier. However, this is not a course for learning only the C++ programming language it first introducesthe object concepts then it applies then to C++ and finally present the UML langage used in object based projects.

Plan :1. Notions de programmation objet.2. Introduction au langage C++.3. Eléments de base concernant la syntaxe du langage.4. Les classes en C++ et les constructeurs.5. La sucharge des fonctions et des opérateurs.6. L'héritage et le polymorphisme.7. Les classes et fonctions template.8. Utilisation des S.T.L. (Standard Template Library).

Prerequisite :Connaissance du langage C.

Evaluation :Epreuve écrite

Online course :Introduction au langage UML : http://uuu.enseirb.fr/~legal/library/filedetails.php?id=74

14/11/2011 - 06:49:38 49



Course Syllabus

PR202 : S8 projectShared by UV(s) :


Crédits ECTS :

3.00


Teacher(s) :AZZOPARDI StéphaneBORNAT YannickDONDON PhilippeFERRE GuillaumeGARNIER ElianeLANUSSE Patrick [email protected] 05 4000 2417

http://www.enseirb.fr/~lanusseLEBRET ValeryMEGRET RémiMELCHIOR PierreMORIZET GuyRODES Francis

Title :S8 project

Abstract :A subject of project in the field of mixed signal Electronic design is proposed at the beginning of S4 at each coupleof student. This project work is aiming at applying to the real world, the theoretical courses of general Electronic(S1 & S2), analog Electronic (S3), digital design (S1, S2, S3, S4), Power Electronic (S3 & S4), RF design (S4).The students are managed by a teacher during weekly tutorial classes that span over a full semester. Theobjective of the project that is proposed to the students is to design and realize in its definitive version: a moduleor a system that calls for a wide domain of Electronic Engineering: mixed electronic (analog / digital), feed backcontrol, power electronic, RF design.The themes and the difficulty level of these design projects are aiming at reaching the following objectives:

-Training to the work of a R&D engineer that is facing issues in the field of Electronic design.-An application as large as possible of the theoretical courses proposed at ENSEIRB in the fields of: mixedelectronic, feed back control, power electronic, RF design.-An initiation to project management-A development of initiatives and the senses of responsibilities-The acquisition of aptitudes in communication and team work-The quest for efficiency and pragmatism-A sensitization to the capabilities and limitations of the tools currently used by an engineer: Scientific andtechnical documentation, mathematics, simulation tools, test and measurements.-A consciousness of the differences that exist between reality and the results given by: a mathematicalanalysis, a computer simulation or a measurement.

In order to reach these objectives, the students can rely on tools and equipments similar to those encountered inthe industry:

-A specific laboratory where each couple of students disposes of a work bench that is equipped withstandard test and measurement instrumentation, a work station or a Personal Computer. Furthermore,each work station or Personal Computer allows an access to the internet and offers a complete set of CAE /

14/11/2011 - 06:49:38 50







Course Syllabus

CAD software tools.-A laboratory dedicated to DC and Low Frequency test and measurement-A laboratory dedicated to High Frequency test and measurement-A scientific library-Two technical libraries-A fabrication facility and a laboratory dedicated to the realization of Printed Circuit Boards and prototypes-An electronic components stock and purchase centre managed by a technician affected to the electronicprojects laboratories.

Plan :1.Bibliographic research2.Theoretical design of the electronic circuits3.Prototypes realization4.Test and measurements5.Report writing

Prerequisite :General Electronic. (S1 & S2): Analog Electronic UVE3B (S3) : Analog Circuits & systems, Digital design.

Evaluation :Technical report relative to the Practical Work.

Document(s) :Project subject, manufacturer’s data books, scientific and technical books, printed courses, internetaccess. Sample of project’s titles proposed: Circuit for extracting the maximum power from a solar cell,composite amplifier, cardio-frequency-meter, storm detector, battery charger and light control using a bicyclealternator and a high efficiency converter, 27MHz/ 5W class C transmitter for FSK modulation, transceiver120MHz AM 1W, wireless infrared audio transmission, coded infrared remote control, car accelerometer, digitalthermometer …

Keyword(s) :Analog electronic, digital electronic, mixed circuits, feed back control, power electronic, RF circuits

14/11/2011 - 06:49:38 51



Course Syllabus

TS200 : Signal compressionShared by UV(s) :

E8-I Signal and image processing p. 4

Crédits ECTS :

1.00

Number of hours :Lecture : 5.33Tutorial classes : 6.66Practical work : 4.00

Teacher(s) :BERTHOUMIEU YannickDONIAS Marc

Title :Signal compression

Abstract :The lecture deals with the major aspects of coding theory which are used in data compression algorithms. Signalprocessing methods which allow to reducing the binary bandwidth are studied. The different parts are illustratedwith the Jpeg and Mpeg compression standards.

Plan :- Context- Source coding- Data compression- JPEG- Motion and coding- MPEG1-2- MPEG4

Evaluation :Project

14/11/2011 - 06:49:38 52



Course Syllabus

TS205 : Advanced digital communicationShared by UV(s) :


Crédits ECTS :

1.00

Number of hours :Combined lecture and tutorial classes : 8.00Practical work : 8.00

Teacher(s) :FERRE Guillaume

Title :Advanced digital communication

Abstract :Orthogonal Frequency Division Multiplexing (OFDM) is a special form of multicarrier modulation (MCM), where asingle data stream is transmitted over a number of lower rate subcarriers.One of the main reasons to use OFDM is to increase the robustness against frequency selective fading andnarrowband interference. In a single carrier system, a single fade or interferer can cause the entire link to fail, butin a multicarrier system, only a small percentage of subcarriers will be affected. Error correction coding can thenbe used to correct the few erroneous subcarriers.

Plan :1. Introduction2. Multi Carrier Modulation Systems2.a. Propagation Channel caracteristics2.b. OFDM presentation2.c. Guard Interval and cyclic prefix3. Coded OFDM4. OFDM in pratice : DVB-T and IEEE 802.11a5. Conclusion

Prerequisite :TS208, TS201, EN206

Evaluation :Written and laboratory exams

Document(s) :

Keyword(s) :Multi Carrier Modulation, OFDM, Signal Processing, Digital Communications, WLAN WiFi IEEE 802.11

14/11/2011 - 06:49:38 53



Course Syllabus

TS206 : Introduction to image processingShared by UV(s) :


Crédits ECTS :

1.50


Teacher(s) :BERTHOUMIEU YannickDONIAS MarcLASMAR nour-eddine

Title :Introduction to image processing

Abstract :The goal of this class is to familiarize the students with the numerical processing of images: its major concepts,basic algorithms and applications are considered.

Plan :Lecture1. General notions.2. Color representation.3. Usual transforms.4. Enhancement.5. Spatial and frequential filtering.6. Non linear methods.7. Geometrical transforms.8. Mathematical morphology.9. Segmentation.

Combined lecture and tutorial classes1. Image synthesis and processing with Matlab.

Prerequisite :Signal processing, Fourier transform

Evaluation :Written exam

Document(s) :lecture notes for class based on matlab

Keyword(s) :Image processing, Frequency analysis, Filtering

14/11/2011 - 06:49:38 54



Course Syllabus

TS208 : Filter and estimation designShared by UV(s) :


Crédits ECTS :

1.00


Teacher(s) :NAJIM Mohamed

Title :Filter and estimation design

Abstract :We propose to discuss a large number of methods that makes it possible to design 1D digital filters. For thispurpose, we first recall the main features of the analog filter design (Butterworth and Chebychev filters forinstance). Then, we introduce the so-called bilinear transform and the Impulse invariance method for analog todigital filter conversion. It should be noted that we also investigate the choice of the structure and the problemsone runs into when implementing FIR or IIR filters. It is well-known that low-pass or high-pass filtering is a basicprocessing and used in a wide range of applications. It should be noted that the principles we present arenecessary to understand for instance the speech modeling for CELP coding, the filterbank that are used in MPEGcoding, etc. It also a preliminary step before discovering adaptive and optimal filtering.

Plan :1. Introduction to Digital filter design2. RIF filter : frequency features, filter design including a few information about windowing3. IIR filter : frequency features and filter design including bilinear transform and impulse response invariance4. Selection of the strictures and influence of the quantization on the selection of the structure5. Applications

Prerequisite :basic notions in digital signal processing and analog filter if possible (some information are nevertheless recalled)

Evaluation :written exam, 1H

Document(s) :Lecture Notes for class and exercices

Keyword(s) :FIR, IIR, Stability, Window, Bilinear transform, Impulse response invariance, Remez algorithm, window method,influence of the quantization on the choice of the filter structure

14/11/2011 - 06:49:38 55



Course Syllabus

TS221 : Image processing practical lessonsShared by UV(s) :


Crédits ECTS :

0.50


Teacher(s) :DONIAS Marc

Title :Image processing practical lessons

Abstract :The objective is to apply concepts of image processing.

Plan :- Chroma-Keying- Denoising- Derivative Filters

Evaluation :Report

14/11/2011 - 06:49:38 56



Course Syllabus

Index

AU204 : Control system design .................................................................................................................................................................................................................. 5

AU205 : Digital control system................................................................................................................................................................................................................... 6

AU206 : State space modeling, observation and control ........................................................................................................................................................................... 7

AU207 : Implementing control systems...................................................................................................................................................................................................... 8

AU208 : Automatic control practical lessons 2........................................................................................................................................................................................... 9

CE200 : Safety environment and sustainable development ...................................................................................................................................................................... 10

CE203 : Economic intelligence ................................................................................................................................................................................................................. 12

CE209 : Management de la performance des processus et des projets ..................................................................................................................................................... 13

CE210 : Software law................................................................................................................................................................................................................................ 14

CE212 : Quality management ................................................................................................................................................................................................................... 15

CE215 : Introduction to financial markets ................................................................................................................................................................................................ 16

CE216 : Personal Project .......................................................................................................................................................................................................................... 17

CE219 : Introduction to project management .......................................................................................................................................................................................... 18

CE235 : Sciences techniques et sociétés ................................................................................................................................................................................................... 19

E8-A : Micro informatics ............................................................................................................................................................................................................................ 2

E8-B : Automatic control and Signal processing ........................................................................................................................................................................................ 2

E8-C : Electronics........................................................................................................................................................................................................................................ 2

E8-D : Optional Unit of Learning ............................................................................................................................................................................................................... 2

E8-E : Personalized Unit of Learning ......................................................................................................................................................................................................... 2

E8-F : Languages and Management ............................................................................................................................................................................................................ 3

E8-G : Mixed Electronics and HF circuits .................................................................................................................................................................................................. 3

E8-H : Automatic Control ........................................................................................................................................................................................................................... 3

E8-I : Signal and image processing ............................................................................................................................................................................................................. 4

E8-J : Heterogeneous digital electronic systems ......................................................................................................................................................................................... 4

EA201 : High Speed Linear Circuits......................................................................................................................................................................................................... 20

EA202 : PLL: Principle and Applications................................................................................................................................................................................................. 21

EA203 : Data converter circuits ................................................................................................................................................................................................................ 22

EA206 : Interconnections and pulsatory mode ......................................................................................................................................................................................... 23

EA212 : Electronic circuits practical lessons 2 ......................................................................................................................................................................................... 25

EA214 : Power electronics 2 ..................................................................................................................................................................................................................... 26

EA215 : RF techniques.............................................................................................................................................................................................................................. 27

EA217 : Advanced architecture of data converters ................................................................................................................................................................................... 29

EA222 : Noise in the electronics components........................................................................................................................................................................................... 30

EN210 : Advanced micro informatics ....................................................................................................................................................................................................... 31

EN211 : Machine to machine .................................................................................................................................................................................................................... 32

EN212 : Systems on programmable chips................................................................................................................................................................................................. 33

EX200 : Personalized module (1).............................................................................................................................................................................................................. 34

EX201 : Personalized module (2).............................................................................................................................................................................................................. 35

EX213 : Module libre extérieur................................................................................................................................................................................................................. 36

IT221 : Introductory course on programming with real-time Labview .................................................................................................................................................... 37

LC205 : English S8 ................................................................................................................................................................................................................................... 38

LC206 : TOEIC Re-sit S8 ......................................................................................................................................................................................................................... 40

LC214 : 2nd Foreign Language S8 ........................................................................................................................................................................................................... 41

ME200 : Nanoelectronics .......................................................................................................................................................................................................................... 43

ME201 : Microsystems.............................................................................................................................................................................................................................. 44

MI201 : Micro informatics ........................................................................................................................................................................................................................ 46

MI202 : Micro informatic project.............................................................................................................................................................................................................. 47

MI203 : Introduction to Operating Systems.............................................................................................................................................................................................. 48

PG208 : Object Oriented Programming in C++........................................................................................................................................................................................ 49

PR202 : S8 project..................................................................................................................................................................................................................................... 50


Course Syllabus

TS200 : Signal compression...................................................................................................................................................................................................................... 52

TS205 : Advanced digital communication ................................................................................................................................................................................................ 53

TS206 : Introduction to image processing................................................................................................................................................................................................. 54

TS208 : Filter and estimation design......................................................................................................................................................................................................... 55

TS221 : Image processing practical lessons .............................................................................................................................................................................................. 56


course syllabus department: electronics...

Documents