Yarn/ ThreadAnchor Stranded Cotton. 5 skeins of shade 01089, 2 skeins of shades 00328, 00382, 01025 and 1 skein each of shades 00063, 00065 and 00072Anchor Metallic Embroidery Thread. 1 spool of shade 00300

Additional RequirementsMilward : Needle, Embroidery scissorsTape measureDouble sided tape2 large recycled bangles3 thin recycled bangles

Wrapped Bangles

Skill level - Easy

By Sheree Dean makeitcoats.com

Technique: Wrapping

Brand:Anchor Stranded Cotton, Anchor Metallic

Crafting time: Evening

Colour Options - Set One

Colour option 2

✳ Anchor Stranded Cotton 4635000-

col. option 1 ✳ 00065 ▷ 00089 ≠ 00300

col. option 2 ✳ 00885 ▷ 00286 ▶ 00303

col. option 1 ✳ 01089 x4 ✳ 00328 x1 ✳ 01025 x1 ✳ 00063 x1 ✳ 00065 x1 ✳ 00382 x1

col. option 2 ▷ 00524 x1 ✳ 00063 x1 ✳ 00065 x1 ✳ 00075 x1 ▷ 08411 x1 ▷ 08001 x1

▷ Anchor Style 4625000-

Colour Options - Set Two

✳ Anchor Stranded Cotton 4635000-

col. option 1 ✳ 00065 ▷ 00089 ≠ 00300

col. option 2 ✳ 00885 ▷ 00286 ▶ 00303

col. option 1 ✳ 01089 x1 ✳ 00328 x1 ✳ 01025 x1 ✳ 00072 x1 ✳ 00382 x1 ≠ 00300 x1

col. option 2 ▷ 08411 x1 ✳ 00075 x1 ✳ 00065 x1 ✳ 00063 x1 ▷ 00524 x1 ▷ 08001 x1

▷ Anchor Style 4625000- ≠ Anchor Metallic 4316000 -

Colour option 2

Wrapped Bangles - Set One

Copyright © 2015

Coats PLC

makeitcoats.com

1 2 3 4 5

Place double sided tape onto the inside of the bangle.

Place the thread at an angle on the inside of the bangle.

Wrap the thread around the bangle. Place the thread on at an angle and trim.

6 7 8 9 10

Continue to wrap the thread around the bangle.

Trim the thread and add more tape if needed.

Place threads on using the method above. Wrap both threads together around the bangle.

Continue wrapping the threads.

11 12 13 14

Using the other bangle, place double sided tape on the inside.

Place the thread at angle on the inside of the bangle.

Continue to wrap the thread around the bangle.

Place the thread on the inside of the bangle. You can add more double sided tape over the top of the thread if needed to secure.

15

Using a needle pull the thread behind to secure and trim.

Using a needle pull the thread behind to secure and trim.

Wrapped Bangles - Set Two

Copyright © 2015

Coats PLC

makeitcoats.com

1 2 3 4 5

Place double sided tape onto the inside of the bangles.

Place the thread at an angle on the inside of the bangle.

Wrap the thread around the bangle. Using a needle pull the thread behind to secure and trim.

6 7 8 9 10

Wrap the thread and tie off at the starting point. Trim the threads. You can also add a small amount of craft glue if needed.

Place the thread at an angle on the inside of the bangle. Wrap the thread around the bangle, leaving an approx 4cm gap.

Place the gold thread on the inside at angle. Add more double sided tape if needed. Wrap the thread around untill the bangle is completely covered.

Using a needle pull the thread behind to secure and trim.

11 12 13 14

Continue to wrap the bangle with the gold thread and shade 00072. Secure and trim.

Wrap 3.5m around three of your fingers. Tie gold thread through the loop and leave the threads long. Wrap gold thread around the tassel. Cut the bottom of the loop. Trim the ends.

Wrap round the gold thread twice and tie a knot to secure. Leave both ends of threads long.

15

Attach the tassel to the bangle. Using a needle pull the loose threads through the tassel and trim if needed.

Place the thread on the inside of the bangle at an angle and wrap the thread around the bangle, leaving an approx 4cm gap.