crealco horizon - eurostyle aluminium · adjustable louvre shutters profile identification 28.00...
TRANSCRIPT
-
ADJUSTABLE LOUVRE SHUTTERS
PRODUCT MANUAL
Revision: November 2012
CREALCO HORIZON
crealco. H O R I Z O N
Disclaimer: The right to make alterations is reserved© 2012 Wispeco (Pty) Ltd, All Rights Reserved
-
INDEX
Legal Disclaimer 3Profile Identification 4Extruded Profile Identification 5Hardware Identification 6Window Cross Section 7Cross Section Detail – Closed 8Cross Section Detail – Half Open 9Wall Fixing Detail 10Outer Frame Component Assembly Detail 11Sash Frame Component Assembly Detail 12Louvre Mechanism Assembly Detail 13Machining Detail 14Sinkless Hinge Frame Attachment 15Setting Block Location 16
Disclaimer: The right to make alterations is reserved
PAGE 2© 2012 Wispeco (Pty) Ltd, All Rights Reserved
crealco. H O R I Z O N
This manual must be read in conjunction with the Installation, Cleaning and Maintenance Document,BEE Certificates and the Performance Certificates for the relevant system. The manual must also beused in conjunction with the design and cutting list from the latest version of StarFront.
-
LEGAL DISCLAIMERAll information, recommendations or advice contained in this documentationis given in good faith to the best of Wispeco’s knowledge and is based oncurrent procedures in effect.
Since the actual use of this documentation by the user is beyond the control ofWispeco, such use is within the exclusive responsibility of the user. Wispecocannot be held responsible for any loss incurred through incorrect or faulty useof this documentation.
Great care has been taken to ensure that the information provided is correct.Wispeco will accept no responsibility for any errors and/or omissions, which mayhave inadvertently occurred.
All mechanical joints must be sealed with a Wispeco approved joint sealer.
Laminated glass must not stand in water.
All drawings in the Wispeco Documentation are shown NOT to scale.
Wispeco cannot accept responsibility for the use of standard products sinceWispeco does not know where these products are being installed.
The use of anti-magnetic stainless steel screws and pop rivets is recommendedto reduce galvanic corrosion in harsh environments.
The hardware recommended in this documentation is suitable for use in mostatmospheric environments. When hardware is used in severe coastal environmentsthe manufacturer of the hardware must be consulted.
Fixing lugs on frames must be positioned as per the user manual and used inaccordance to the AAAMSA specifications. When profiles are screwed togetherthe screw centers must also be according to the user manual.
All glass used within Wispeco products must comply with SAGGA regulations.
All glazing above 10m from ground level must be signed off by a competent person(Glazing) in accordance with the national building regulations
By continuing to use this documentation you acknowledge that youunderstand and accept the legal disclaimer.
Disclaimer: The right to make alterations is reserved
PAGE 3© 2012 Wispeco (Pty) Ltd, All Rights Reserved
crealco. H O R I Z O N
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSPROFILE IDENTIFICATION
28.00 16.50
FRAME STANDARDW33021
FRAME CAPW33022
30.0032.00 30.00
STILE 32MMW56087
MIDRAIL 32MM
TOP/BTM RAIL 32MMW56085
72.45
ADJUSTABLE LOUVREW55474
58.00
TOP/BTM LOUVREW55469
20.00
ASTRAGAL TW32846
HORIZON SHUTLOCKING BARW32847
Disclaimer: The right to make alterations is reserved
PAGE 4© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSEXTRUDED PROFILE IDENTIFICATION
STILE 32MMW56087
MIDRAIL 32MMW56086
TOP/BTM RAIL 32MMW56085
ADJUSTABLE LOUVREW55474
TOP/BTM LOUVREW55469
ASTRAGAL 32MMW32846
FRAME STANDARDW33021
FRAME CAPW33022
Disclaimer: The right to make alterations is reserved
PAGE 5© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
HARDWARE IDENTIFICATION
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERS
4x10 COUNTERSUNKRIVETCSKR410
BUBBLE SEALWSG001E
LOUVRE MECHANISMABLM14
ALUFAB HINGESSINKLESS 100x40MMHRA1040
HORIZON ANGLE HINGE100x40MMHNG003HA
V-CATCHVC001P
8X20 COUNTERSUNKPOSI S/S SCREWSTCPS840
Disclaimer: The right to make alterations is reserved
PAGE 6© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSWINDOW CROSS SECTIONWITH MIDRAIL
A A
SECTION A - A
SECTION B - B
B
B
Disclaimer: The right to make alterations is reserved
PAGE 7© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSCROSS SECTION DETAILBI-FOLD -WITH MIDRAIL CLOSED
SECTION A - A
SECTION B-B
A
A
B B
Disclaimer: The right to make alterations is reserved
PAGE 8© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSCROSS SECTIONAL DETAILBI-FOLD WITH MIDRAIL - HALF OPEN
A A
SECTION A - A
Disclaimer: The right to make alterations is reserved
PAGE 9© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSWALL FIXING DETAIL
Bi-fold Louvre with Frame Detail
Bi-fold Louvre with Frameattached to wall
Bi-fold Louvre with Angle Hingeattached to wall
Disclaimer: The right to make alterations is reserved
PAGE 10© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSOUTER FRAME COMPONENTASSEMBLY DETAIL
W33021
W33022
W33021
W33022
Disclaimer: The right to make alterations is reserved
PAGE 11© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSSASH FRAME COMPONENTASSEMBLY DETAIL
W32846
W56087
W56085
W56086
W56085
Disclaimer: The right to make alterations is reserved
PAGE 12© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSLOUVRE MECHANISMASSEMBLY DETAIL
ABLM14
W55469
W55474
W55469
Disclaimer: The right to make alterations is reserved
PAGE 13© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSMACHINING DETAIL
CORNER CLEAT
Holes for HingesW33021
Mitre cut
W33021
Holes on Frame outer edgefor Corner Cleat
W33021
W33021
Disclaimer: The right to make alterations is reserved
PAGE 14© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.
-
CREALCO HORIZONADJUSTABLE LOUVRE SHUTTERSSINKLESS HINGEFRAME ATTACHMENT
W33021
HRA1040
Disclaimer: The right to make alterations is reserved
PAGE 15© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Aluminium Profile StockistsEst. 1946
crealco.