CREATING A TIMELAPSE

@campbellcameras

Choosing Your Subject

@campbellcameras

1THINK CREATIVELY! Here are some suggestions:

1) Cloud / Sky / Weather / Stars 2) City Scene 3) Reflections

4) Small Animals 5) Snow Melting 6) Clock photo credit: www.hdwallpaper.me

photo credit: www.richard-seaman.com

photo credit: www.beautiful-lanscape.com

photo credit: www.sodahead.com

photo credit: www.123rf.com

What You Need2

@campbellcameras

DSLR, Video Camera, or GoPro HD HERO

1 Support System- Triplod & Fluid Head, Slider, Egg Timer, etc.

2

BONUS TIP: Put your GoPro on a kitchen egg timer to get a 360º 1 hour timelapse

If you are using a DSLR you will also need an intervalometer

3

Shooting a Timelapse on a GoPro3

@campbellcameras

Mount GoPro on your support system and frame your subject

Put your GoPro in Timelapse Mode -A class 10 SDHC Card is required.

Timelapse Complete!!

REMEMBER: Make sure you have a full charged battery, or a spare battery!

Shooting a Timelapse on a Video Camera4

@campbellcameras

Mount Video Camera on your support system and frame your subjectIn menu settings, turn off the auto power

off or standby mode so that the camerawon’t turn off during your timelapse.

Manually adjust your settings, includ-ing your focus, white balance, shutter speed, etc.

Record your video the length of your timelapse

You speed up your timelapse in Post Production

Shooting a Timelapse on a DSLR5

@campbellcameras

• Shoot in RAW, it allows you more creative control in post production. Takes up more room on card & computer.

• Always shoot in Manual Mode.

• If unsure, ALWAYS underexpose your image (change in post)

• You can shoot in AV (aperture priority) if you will have a dramatic change in lighting.

• An intervalometer is a must!!

TIPS:

BASIC DSLR TIMELAPSE FORMULA6

@campbellcameras

1) Decide the length of the timelapse (example 10 min.) multiply by 60 to get seconds.

10

2) To get smooth footage, you need at least 24fps. So take the length of your end video and multiply it by 24. (example end video is 10 secs)

You will need at least 240 frames to create a smooth 10 sec timelapse

3) Divide the number of seconds of your timelapse by the numer of frames you need.

60x = 600 sec

10 24x = 240 frames

600240 = 2.5 To get a smooth 10 second timelapse from

a 10 min film, you will need to take at least an image every 2.5 seconds.

Setting Your Canon intervalometer7

@campbellcameras

Intervalometer: Plugs into your DSLR and controls how often, how long, and how many shots are taken.Intervalometers are a MUST if using a DSLR to film a timelapse.

Setting up a timelapse on the Canon Invervalometer:

Setting up an interval timer. Interval timer takes a photo every ____ sec/min/hour 1) Enter the Interval Mode - 2) Then set the desired time interval between shots 3) Press the start/stop button to begin timelapse

A photo will be taken every 30 seconds in this example.

Setting the exposure count. Can be used in conjunction with the interval timer. 1) After you set the interval timer, move to the exposure count mode - 2) Then set the desired # of shots you want to capture 3) Press the start/stop button to begin timelapse

TIP: If you want an unlimited number of interval exposures, set the exposure count to “00”*** If you don’t have the interval timer set up and just use the exposure count, then it will take a shot every 1 second ***

Setting Your Hahnel intervalometer8

@campbellcameras

Setting up an interval timer. 1) Enter the Interval Mode - 2) Set the Delay, the time in hours, min, and seconds before the interval starts. 3) Set up the Long. A- Single Shot- set it to 00 00 00 B- Continuous shooting - set the length of the continuous shooting burst C- Bulb Exposure - Sets the length of the time the shutter is open 4) Set the Interval 1, the time between shooting (*** must be higher than camera shutter speed***) 5) Set the N1. A- Single Shot- sets the number of shots taken B- Continuous Shooting- number of bursts of continuous shooting C- Bulb Exposure - number of shots taken 6) Set the Interval 2, the time between each interval 7) Set the N2 - the number of times the program is repeated 8) Press the play/stop to activate or stop the program.

THE END

Got questions or comments? Tweet Us @campbellcameras

Tag us in your wildlife photos on INSTAGRAM @campbell_cameras or #campbellcameras