crown deadline anchors are titan tough

7
TITAN Tough TITAN anchors offer unmatched reliability, durability and cost savings over the competition.

Upload: kathy-deglandon

Post on 03-Aug-2015

163 views

Category:

Business


0 download

TRANSCRIPT

Page 1: Crown Deadline Anchors are Titan Tough

TITAN Tough

TITAN anchors offer unmatched reliability,

durability and cost savings over the

competition.

Page 2: Crown Deadline Anchors are Titan Tough

Why Choose TITANFabricated and

Assembled in the USA

Thicker Steel Than

Competition

Proof-Tested to 150% of

Rated Capacities

Oversized Internal

Bearings and Shaft

Assemblies

Improved bracing

compared to competition

Designed to offer

extremely accurate weight

indication

Engineered for years of worry-free, safe service

Page 3: Crown Deadline Anchors are Titan Tough

TITAN TA118T

Derrick Mounted

Single Line Pull 45,000

Pounds

Uses Crown 16.1 Square

Inch Load CellCCC104

Pull tested to 67,500 Pounds

Wireline Sizes7/8, 1, 1-1/8,

1-1/4

Drum Diameter16 inches

Page 4: Crown Deadline Anchors are Titan Tough

TITAN TA119

Floor Mounted

Single Line Pull 60,000

Wireline Sizes1-1/8, 1-1/4

Drum Diameter24 inches Crown

Compression Load CellCCC105

Pull tested to 90,000 Pounds

Page 5: Crown Deadline Anchors are Titan Tough

TITAN 120-SG

Floor Mounted

Crown Compression

Load CellCCC106

Single Line Pull 100,000

Pounds

Wireline Sizes1-1/4, 1-3/8, 1-1/2, 1-5/8Drum

Diameter28 inches

Pull Tested to 150% of capacity

Page 6: Crown Deadline Anchors are Titan Tough

TITAN vs.The

CompetitionModel

NumberMount Rotatin

gLoad Cell

Type & ModelSingle

Line Pull(pounds)

Wireline Sizes

(inches)

Drum Diamet

er (inches

)

Hercules Model

Equivalent

American Block Model

Equivalent

National Model

Equivalent

TA120-SG

Floor No Compression CCC106

100,000 1-1/4, 1-3/8,

1-1/2, 1-5/8

28 HA120T-SG

FCX-100 Type E/EB

TA119 Floor No Compression CCC105

60,000 1-1/8,1-1/4

24 HA119T FCX-60 Type D

TA118T Mast No CompressionCCC104

45,000 7/8, 1-1/8, 1-1/4

16 HAT118T FXC-45 Type FS

Page 7: Crown Deadline Anchors are Titan Tough

TITAN Tough

Hercules is a registered trademark of Quadco, Inc. Crown Oilfield Instrumentation is not affiliated with Hercules or Quadco INC.

TITAN DEADLINE ANCHOR & TITAN DRILLLINE ANCHOR are registered trademarks of Crown Energy Services, Incorporated.Crown Oilfield Instrumentation is an independent manufacturer and is not affiliated in any way with any of the OEMs identified on this page. The use of OEM

names is for identification purposes only and is not intended to cause confusion as to the source, identity, sponsorship, endorsement of qualities of the products made by the manufacturers of

Hercules, American Block, or National deadline anchors.