cs 3500i-4500i-5500ientb1r2

TECHNICAL BULLETIN CS 3500i/4500i/5500i

SUBJECT: BULLETIN INDEX 05/16/11

SUBJECT: BULLETIN #

NEW MODEL PRODUCT INFORMATION.....................................................................................1

TABLE OF CONTENTS

INTRODUCTION ..............................................................................................................................................................................................................1

GENERAL INFORMATION ..............................................................................................................................................................................................1

DEALER LIMITED WARRANTIES ...................................................................................................................................................................................2

WARRANTY RETURNS...................................................................................................................................................................................................3

PRODUCT TRAINING......................................................................................................................................................................................................6

MAXIMUM MONTHLY VOLUME......................................................................................................................................................................................6

SERVICE DOCUMENTATION .........................................................................................................................................................................................7

ACCESSORY / OPTIONS ................................................................................................................................................................................................8

MEMORY SPECIFICATIONS AND REFERENCE...........................................................................................................................................................8

YIELDS OF SUPPLY ITEMS & COST PER COPY..........................................................................................................................................................9

FIRMWARE INFORMATION ............................................................................................................................................................................................9

3500i/4500i5500i NEW & REPAIR PRINTED CIRCUIT BOARDS.................................................................................................................................10

MAINTENANCE KIT YIELDS & COST PER COPY .......................................................................................................................................................10

MAINTENANCE KIT CONTENTS ..................................................................................................................................................................................10

3500i/4500i/5500i MACHINE SPECIFICATIONS...........................................................................................................................................................11

3500i/4500i/5500i MACHINE SPECIFICATIONS (continued) ...................................................................................................................................12 Printer Functions ........................................................................................................................................................................................................13 Scanner functions ......................................................................................................................................................................................................13 DF-770/AK-730/PH-7A...............................................................................................................................................................................................14 JS-730/731.................................................................................................................................................................................................................14 DF-790 .......................................................................................................................................................................................................................15 BF-730........................................................................................................................................................................................................................15 MT-730.......................................................................................................................................................................................................................16 PH-7A.........................................................................................................................................................................................................................16 Fax System (V)...........................................................................................................................................................................................................16 DP-770 .......................................................................................................................................................................................................................17 DP-771 .......................................................................................................................................................................................................................17 PF-770........................................................................................................................................................................................................................17

BTU’s ..............................................................................................................................................................................................................................18

POWER CONSUMPTION ..............................................................................................................................................................................................18

INSTALLATION REQUIREMENTS ................................................................................................................................................................................19

WEIGHT AND DIMENSIONS .........................................................................................................................................................................................19

MACHINE SPACE REQUIREMENTS ............................................................................................................................................................................19

UTILITIES .......................................................................................................................................................................................................................20

PRINT DRIVERS ............................................................................................................................................................................................................21

PRODUCT CONFIGURATION.......................................................................................................................................................................................22

ACCESSORY COMPATIBILITY.....................................................................................................................................................................................23

SK-720 MFP STABLIZERS ............................................................................................................................................................................................24

RECOMMENDED ACTION FOR FIELD MACHINES

AT SETUP NEXT SERVICE CALL

NEXT PM INFORMATION ONLY

TECHNICAL BULLETIN CS 3500i/4500i/5500i

Bulletin # CS 3500i/4500i/5500i-01

Model CS 3500i/4500i/5500i

Date 05/16/11

Updated Serial Number From introduction Subject

NEW MODEL PRODUCT INFORMATION This technical publication is confidential information that is the property of Kyocera Mita America, Inc. It is solely for the use of Kyocera Mita’s authorized dealers. This information may not be published, reproduced, sold, or copied in any media. Its unauthorized use is prohibited. Copyright © 2011 by Kyocera Mita America, Inc. All rights reserved.

INTRODUCTION Technical Services is pleased to announce the Kyocera CS 3500i/4500i/5500i B&W MFP’s. All Models in the Series come standard with Duplex capabilities, Scan System, 1GB Standard Shared System Memory and are Energy Star Compliant. These new additions to our product line deliver the Ultra-Reliability, Unsurpassed Performance and Superior Image Quality you have come to expect from Kyocera and are further enhanced by a common design concept, common user interface and common accessories. Key Features are as follows: CS 3500i: 35 PPM B &W (Letter) CS 4500i: 45 PPM B &W (Letter) CS 5000i: 55 PPM B &W (Letter)

• Standard Hard Drive (160GB) • Standard Print Controller, PowerPC750 GL 600MHz • 1GB Standard System Memory, Upgradable to a Max 2GB •

GENERAL INFORMATION

Product Name CS 3500i/4500i/5500i Product Code 2LL/2LJ/2LH Product Training Learning Center on KMAconnect Diagnostic Center Contact Number 1-800-255-6482 Software Solution Group Email [email protected] KMAconnect Web Site kmaconnect.com KMAconnect Help Desk [email protected] Kyocera Mita Web Site kyoceramita.com Kyocera Technical Support (Email) [email protected] Material Safety Data Sheet Available on KMAconnect National Processing Center (Customer Service) 1-866-596-2372 or [email protected] National Training Center [email protected]

CS 3500i/4500i/5500i-01 May 16, 2011

Page 2

DEALER LIMITED WARRANTIES FOR CS 3500i/4500i/5500i

MULTIFUNCTIONAL PRODUCTS

Copystar, a Division of Kyocera Mita America, Inc. (“Copystar”) warrants its new color Multifunctional Products (referred to herein as “MFP”) to Authorized Dealers as follows: Mainframes and Accessories. The MFP’s mainframe and accessories are warranted against defects in workmanship and material under normal use and service for a period of 36 months from installation with first end-user, or 39 months from Copystar's invoice date to Dealer, or the specified number of copies/prints as listed below, whichever occurs first (referred to herein as “MFP Warranty Period”). Copystar’s obligation hereunder is expressly limited to providing Dealer with the parts required to repair the MFP or crediting Dealer's account for the cost of said parts, at Copystar's election. Maintenance Kits. Maintenance Kits consist of the developing unit, the drum unit, the transfer belt, and the fixing unit. Components of Maintenance Kits included with the original MFP are warranted against defects in material and workmanship for a period of 36 months from date of installation with first end-user, or 39 months from Copystar's invoice date to Dealer, or the specified number of copies/prints listed below, whichever occurs first (referred to herein as the “Original Maintenance Kit Copy Allowance”). Replacement Maintenance Kits purchased and installed after the Original Maintenance Kit Copy Allowance has expired, shall have a limited warranty for the specified number of copies/prints listed below, or until the Original Maintenance Kit Warranty Period expires, whichever occurs first. Replacement Maintenance Kits purchased and installed after the Maintenance Kit Warranty Period has expired, shall have a limited warranty of 90 days. To be covered by this 90 day warranty, the Replacement Maintenance Kit must be installed and registered prior to the MFP exceeding 10% of the original Maintenance Kit Copy Allowance.

These warranties do not cover MFPs or components of Maintenance Kits which: (a) have become damaged due to operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress, (b) have used parts or supplies which are not genuine Kyocera brand parts or supplies, (c) have been installed or serviced by a technician not employed by Copystar or an Authorized Copystar's Dealer, (d) have had the serial number modified, altered, or removed, or (e) Dealer fails to register the installation information for the MFP with Copystar utilizing KMAconnect. THESE WARRANTIES SHALL BE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. COPYSTAR SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF THE USE OF, OR INABILITY TO USE, THE MFP.

MFP MODEL COPIES/PRINTS ORIGINAL MAINTENANCE KIT COPY ALLOWANCE

3500i 1,800,000 600,000 4500i 1,800,000 600,000 5500i 1,800,000 600,000

CS 3500i/4500i/5500i-01 May 16, 2011

Page 3

WARRANTY RETURNS

To process your Warranty Claim and verify other key information, the Maintenance Report (Nine Pages), Event Log (One Page), Status Page (One Page), Service Status Page (Two Pages), and Network Status Page (Three Pages) must be included with the returned item along with the MIP-PG Pattern. In past products, these Reports were accessed from different locations. All necessary Reports can now be output under Maintenance Mode 952, Maintenance Mode Workflow with a few easy steps. New Model MFP’s now have a new procedure for a Parts Warranty Claim. A 12-digit RP code representing the MFP's current Firmware version is printed on the Status Page. This RP code is now required in OTS, when inputting a Parts Warranty Claim or registering a Maintenance Kit Item. The MFP’s Firmware version will be compared to the current firmware version maintained in the system. If the MFP's Firmware version matches the latest Firmware version available on KMAconnect, and all other return request requirements have been met, a Return Authorization will be issued. A 30-day grace period from the release date of the latest Firmware posted on KMAconnect will be allowed before the rule is enforced. If the MFP’s Firmware version is Older than the current version posted on KMAconnect, the following will occur:

1. The system will deny the Return Request and prompt user to update the Firmware first, resubmit the Return Request and enter the new RP Code.

2. If a Return Authorization is not requested and an MK item is being registered, the RP code is still required. The system will allow the item to be registered, but issue a warning, notifying the user that new firmware is available and to update the MFP Firmware.

Maintenance Mode Workflow

1. Start by entering Maintenance Mode U952.

2. Select “Execute”.

3. Select “Warranty”

CS 3500i/4500i/5500i-01 May 16, 2011

Page 4

4. Maintenance Mode U089, Outputting MIP-PG Pattern and U000, Outputting an own-status report is required to be returned with the Warranty Claim Item.

5. Select “U089”.

6. Select “Color Belt”.

7. Press Start, Press System Menu, Press the Start Key again.

8. Press System Menu to return to the Maintenance Mode

9. Press “Sample Set”

10. Press “Start”, Press “System Menu”, Press the “Start Key” again.

11. Press “System Menu” to return to the Maintenance Mode

CS 3500i/4500i/5500i-01 May 16, 2011

Page 5

12. Press the “Reset Key”.

13. After the output is complete, Select “U000”.

14. Select “All” and Press the “Start Key”. All required Maintenance Reports will be printed.

15. The final step consists of entering the Underlined RP Code from the First Page of the Service Status Page, in the RP Code field, on the Parts Warranty Return Section in OTS.

16. Failure to input the correct RP Code will deny the Return Request and not let you proceed.

CS 3500i/4500i/5500i-01 May 16, 2011

Page 6

PRODUCT TRAINING

Product Training Step 1: On-Line TASKalfa MFP Pre-training Step 2: Four Day TASKalfa MFP Classroom Training

Prerequisites 500ci Series or Equivalent Color Training

TASKalfa MFP Classroom Training is available at your Regional Office. The Training Class will include 3050ci/3550ci/4550ci/5550ci/6550ci/7550ci Full Color models and the 3500i/4500i/5500i/6500i/8000i B&W Models. Color experience is required for participation in this course. Scheduling for the 4-day Regional classroom training is available through the Learning Center. Be sure to select a class held at the appropriate Regional location. Upon registering for a class, verification will be made that each Technician meets the prerequisite. The Technician will be required to complete the Online Pre-Training course and pass with a score of 80% or higher. It is also recommended that the Online Color Theory 101 course be completed. The On-line TASKalfa MFP Pre-training Course is available at the Learning Center on KMAconnect, only for Technicians that meet the Prerequisite. For those who do not meet the prerequisite, contact your Regional Technical Manager. The Dealership will not be authorized to purchase a machine until at least one Technician has completed either the Four day classroom training.

MAXIMUM MONTHLY VOLUME

3500i/ MAX. MONTHLY VOLUME

175,000 Pages

4500i MAX. MONTHLY VOLUME 200,000 Pages

5500i MAX. MONTHLY VOLUME

225,000 Pages

CS 3500i/4500i/5500i-01 May 16, 2011

Page 7

SERVICE DOCUMENTATION

Description Part Number CS 3500i/4500i/5500i Service Manual Available on KMAconnect

CS 3500i/4500i/5500i Parts List Available on KMAconnect

3500i/4500i/5500i Operation Guide Available on KMAconnect

3500i/4500i/5500i Quick Guide Available on KMAconnect

3500i/4500i/5500i Safety Guide Available on KMAconnect

3500i/4500i/5500i/ 6500ci/7500ci Printer Driver User Guide

Available on KMAconnect

DF-770/AK-730/PH-7A Service Manual Available on KMAconnect

DF-770/AK-730/PH-7A Parts List Available on KMAconnect

DF-790/BF-730/MT-730/AK-730/PH-7A Service Manual Available on KMAconnect

DF-790/BF-730/MT-730/AK-730/PH-7A Parts List Available on KMAconnect

JS-730/731 Service Manual Available on KMAconnect

JS-730/731 Parts List Available on KMAconnect

DP-770 Service Manual Available on KMAconnect

DP-770 Parts List Available on KMAconnect

DP-771 Service Manual Available on KMAconnect

DP-771 Parts List Available on KMAconnect

PF-730 Service Manual Available on KMAconnect

PF-730 Parts List Available on KMAconnect

PF-740 Service Manual Available on KMAconnect

PF-740 Parts List Available on KMAconnect

Fax System (V) Service Manual Available on KMAconnect

PRESCRIBE Commands Command Reference Operation Guide Rev-4.8 Available on KMAconnect

PRESCRIBE Commands Technical Reference Operation Guide Rev-4.7 Available on KMAconnect

KM-NET Viewer User Guide Rev-5.2-2011-3 Available on KMAconnect

Kyocera Command Center RX User Guide Rev-1.2 Available on KMAconnect

KM-NET for Direct Printing Operation Guide Rev-3.2 2010.06 Available on KMAconnect

Fax System (V) Operation Guide Available on KMAconnect

Data Security Kit (E) Operation Guide Available on KMAconnect

TASKalfa MFP Network Fax Driver Operation Guide Rev 2011.1 Available on KMAconnect

File Management Utility User Guide Available on KMAconnect

UG-34 Installation Guide/Operation Guide Available on KMAconnect

CS 3500i/4500i/5500i-01 May 16, 2011

Page 8

ACCESSORY / OPTIONS

Item Part Number Description

DP-770 1203NV6US0 Reverse Duplex Scan Document Feeder DP-771 1203NW6US0 Single Pass Document Feeder Platen Cover 1202H70UN0 Platen Cover DF-770 1203NC0UN0 1,000 Sheet Finisher DF-790 1203NB0UN0 4,000 Sheet Finisher AK-730 1703NB0UN0 Paper Pass for Finisher

(Required with DF-770 or DF-790) MT-730 1203N00UN0 7-bin Mail box BF-730 1203ND0UN0 Booklet and Tri Folding PH-7A 1203NK2US0 Punch Unit PF-770 1203NG7US0 3,000 sheet side deck PF-730 1203NJ7US0 500 sheet x 2 Paper Drawer PF-740 1203NF7US0 1,500 Sheets x2 Paper Drawer Fax System (V) 1505JT2US0 Network Fax

(Required for installation of Internet Fax Kit (A) MM-16-128 1503MB0UN0 Fax Memory 128MB SO-200-1G 855D200612 Optional 1GB of Memory required for Duplex

Scan (DP-771), Form Overlay & Stamp FunctionsInternet Fax Kit (A) 1703MC0UN0 Internet Fax Kit JS-730 1203NZ0UN0 Job Separator, Inner (Cannot be installed with a

DF-770 or DF-790 Finisher). JS-731 1203NM0UN0 Job Separator, Side Data Security Kit (E) 1503MS0UN0 Hard Drive Encryption/Overwrite Kit Printed Document Guard Kit (A) 1703L90UN0 Printed Document Guard Kit (A) SH-10 1903JY0000 Staple Cartridge for DF-770/BF-730 SH-12 1903NB0UN0 Staple Cartridge for DF-790 DT-730 1902LC0UN1 Document Table UG-34 1503NX0UN0 Emulation Kit IB-50 1505JV0UN0 Gigabit Ethernet Board Card Reader Holder (B) 1709AD0UN0 Card Reader Holder WT-860 1902LC0UN0 Waste Toner Box Stand 855D200605 Copier Stand

MEMORY SPECIFICATIONS AND REFERENCE

Memory Type Standard Maximum System Memory

200PIN DDR2 SO DIMM 1GB 2GB

Hard Drive

160GB 160GB

A total of 2GB of Memory is required for Duplex Scan (DP-771), Form Overlay & Stamp Functions.

CS 3500i/4500i/5500i-01 May 16, 2011

Page 9

YIELDS OF SUPPLY ITEMS & COST PER COPY

Description Part Number Yield / 5% Price CPC

Toner TK-6309 1T02LH0CS0 35,000 pages/5% coverage $97.97 0.002799 Toner Cartridge Price & CPC is based on case price.

FIRMWARE INFORMATION

Version (Shown on the Status Page)

Description Location Availability

Upgrade Pack Initial 2LH_2F00.001.229 SOFTWARE MAIN (FS) 2LC_7000.001.226 SOFTWARE MMI 2LC_81BR.001.011 SOFTWARE LANGUAGE BR 2LC_F000.001.007 SOFTWARE BROWSER 2LC_J000.001.022 SOFTWARE PDF RESORCE 2LF_1000.001.196 SOFTWARE ENGINE 2LC_1200.002.007 SOFTWARE SCANNER 2LC_1400.001.023 SOFTWARE MOTOR 2LC_1A00.002.001 SOFTWARE IH

Version (Shown on the Status Page)

Description

Option Upgrade 3NF_9000.003.001 SOFTWARE FRNOT DECK 3NJ_9000.002.001 SOFTWARE CASSETTE DECK 3NL_9000.001.021 SOFTWARE SIDE MULTI TRAY 3NG_9000.001.018 SOFTWARE SIDE DECK 3NB_9200.001.179 SOFTWARE DF MAIN(4K) 3NC_9200.002.001 SOFTWARE DF MAIN(1K) 3ND_9700.001.067 SOFTWARE BF MAIN 3NK_9A00.001.048 SOFTWARE PH MAIN 3N0_9800.001.011 SOFTWARE MB MAIN 3M4_9500.002.006 SOFTWARE DP (CIS) 3NV_9500.001.020 SOFTWARE DP

(USB) Available on KMAconnect

Two Versions of Firmware Packs will be available for download from KMAconnect. The normal 3500i/4500i/5500i Combined Firmware Pack and a 3500i/4500i/5500i Combined Firmware “Turbo” Pack. The “Turbo” Pack will contain a special Skip file “ES_SKIP.ON.V001” which will speed up the upgrade process by only upgrading versions that have changed. The Normal Pack will over write all firmware. Note: At Setup, Technical Services recommends checking KMAconnect and downloading the current Upgrade Pack Firmware and to periodically check for new updates to install.

CS 3500i/4500i/5500i-01 May 16, 2011

Page 10

3500i/4500i5500i NEW & REPAIR PRINTED CIRCUIT BOARDS

PCB NAME NEW PCB P/N

REPAIR PCB P/N

REPAIR PCB PRICE *

PARTS PWB MAIN ASSY SP 302LH94140 855RB00224 $378.78 PARTS PWB ENGINE ASSY SP 302LH94170 855RB00225 $112.39 PARTS UNIT LOW VOLTAGE 100 SP 302LH94010 855RB00226 $96.22 PARTS PWB OPERATION ASSY SP 302K994240 855RB00227 $32.32 * Repair PCB Price includes credit issued after return of old Board. Defective PCB’s being returned within the 3-Year warranty period must be returned to the National Return Center utilizing the Parts Warranty Registration & Return System on KMAconnect. Print out the Return Authorization form obtained through the system and return it with the Circuit Board for Credit. Any associated mounting brackets, hardware, system software and original packaging must be included with the claim. Credit will then be issued to your account. For defective PCB’s out of warranty, a Repair PCB must be ordered from the Parts Distribution Center. The dealer will be charged 100% of the New PCB price. The defective PCB can be returned using the Online Repair Board Core Form within 30 days of the Repair PCB invoice date. Upon receipt of the defective PCB at the National Return Center, the dealer will be credited 55% of the New PCB price. If a New PCB is ordered instead of a Repair PCB, credit will not be issued for the returned defective PCB. All Part Numbers and Pricing subject to change without notice.

MAINTENANCE KIT YIELDS & COST PER COPY

Description Part Number Yield Price CPC

MK-6305A (Maintenance Kit) 1702LH7US1 600K $407.02 0.000678

MAINTENANCE KIT CONTENTS MK-6305A 600K Yield

Description P/N Qty DK-6305 302LH93010 1 DV-6305 302LH93030 1 FK-6306 302LH93050 1 Filter Top 302LF33660 2 Filter Left Side 302LC33370 2 Parts Belt Ass’y SP 302LF94060 1

Contents and Item Numbers subject to change without Notice.

CS 3500i/4500i/5500i-01 (revised)June 01, 2011

Page 11

3500i/4500i/5500i MACHINE SPECIFICATIONS

Specifications Item 35ppm 45ppm 55ppm

Type Desktop Printing Method Electrophotography by semiconductor laser Originals Sheet, Book, 3-dimensional objects (maximum original size: A3/Ledgerl) Original Feed System Fixed

Cassette 60 to 220 g/m2, 16~58lb. Bond Paper Weight MP Tray 60 to 300 g/m2, 16~67lb. Bond,

67lb.Bond = 140lb. Index Cassette Plain, Rough, Vellum, Recycled, Preprinted, Bond, Color,

Prepunched, Letterhead, Thick, High Quality, Custom 1 to 8 (Duplex: Same as simplex)

Paper Type

MP Tray Plain, Transparency (OHP film), Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock, Color, Prepunched, Letterhead, Thick, Coated, Envelope, High Quality, Custom 1 to 8

Cassette A3, B4, A4, A4R, B5, B5R, A5R, Ledger, Legal, Letter, LetterR, Statement, Oficio II, 12 × 18", Folio, 8K, 16K, 16KR

Paper Size

MP Tray A3, B4, A4, A4R, B5, ISO B5, B5R, A5R, B6R, A6R, Return postcard, Postcards, Envelope DL, Envelope C5, Envelope C4, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9), Envelope #6 (Commercial #6 3/4), Envelope Monarch, Youkei 2, Youkei 4, Ledger, Legal, Letter, LetterR, ExecutiveR, Statement, Oficio II, 12 × 18", Folio, 8K, 16K, 16KR, Custom, Banner: 304.8mm x 1,219.2mm (12”x48”) Width Universal

Zoom Level Manual mode : 25 to 400%, 1% increments Auto mode : Preset Zoom A4: 35 sheets/min A4: 45 sheets/min A4: 55 sheets/min Letter: 35 sheets/min Letter: 45 sheets/min Letter: 55 sheets/min A4R: 24 sheets/min A4R: 24 sheets/min A4R: 24 sheets/min LetterR: 24 sheets/min LetterR: 24 sheets/min LetterR: 24 sheets/min A3: 17 sheets/min A3: 22 sheets/min A3: 27 sheets/min Ledger: 17 sheets/min Ledger: 22 sheets/min Ledger: 27 sheets/min B4: 21 sheets/min B4: 27 sheets/min B4: 33 sheets/min Legal: 21 sheets/min Legal: 21 sheets/min Legal: 21 sheets/min

Copying Speed

B5: 35 sheets/min B5: 45 sheets/min B5: 55 sheets/min First copy time (A4/Letter, feed from cassette)

B/W: 6.1s or less B/W: 4.5s or less B/W: 4.1s or less

Power ON 23s or less 23 s or less 23 s or less

Low Power 10s or less 10s or less 10s or less

Warm-up time (22 °C/71.6 °F, 60% RH)

Sleep 16s or less 16s or less 16s or less

CS 3500i/4500i/5500i-01 May 16, 2011

Page 12

3500i/4500i/5500i MACHINE SPECIFICATIONS (continued)


Cassette 550 sheets (64g/m2, 17lb. Bond) 500 sheets (80g/m2, 21lb. Bond)

Paper Capacity

MP Tray A4/Letter or less 165 sheets (64 g/m2) 150 sheets (80 g/m2) 21lb. Bond More than Letter/A4 55 sheets (64 g/m2) 50 sheets (80 g/m2) 21lb. Bond Top Tray 250 sheets (80g/m2, 21lb. Bond) Inner Job Separator

30 sheets (80g/m2, 21lb. Bond) Output Tray Capacity

Right Job Separator

100 sheets (80g/m2, 21lb. Bond)

Continuous Copying 1 to 999 sheets Light Source LED Scanning System Flat bed scanning by CCD image sensor Photoconductor a-Si drum (diameter 40 mm) Image write system Semiconductor laser Charging System Charger roller Developing System Touchdown developing system

Developer: 2-component Toner replenishing: Automatic from Toner Container

Transfer System Transfer Belt and Roller Separation System Small diameter separation, separation electrode Cleaning System Counter blade, cleaning roller Charge Erase System Exposure by cleaning lamp (LED) Fusing System Heat Roller Fusing

Heat source: Halogen heaters Abnormally high temperature protection devices: thermostat

CPU PowerPC750CL (600MHz) Standard 1024 MB Main Memory Maximum 2048 MB

Hard Disk 160GB Standard USB interface connector: 1 (USB Hi-speed)

USB host: 2 (USB Full-speed) Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)

Interface

Option Fax Slot : 2 Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)

Resolution 600 × 600 dpi Temperature 10 to 32.5 °C/50 to 90.5 °F Humidity 15 to 80% RH Altitude 2,500 m/8,202 ft or less

Operating Environment

Brightness 1,500 lux or less Dimensions (W × D × H) Machine only: 668 × 767 × 747 mm, 26 5/16 × 30 3/16 × 29 3/8”

With Paper Feeder: 668 × 767 × 1053 mm, 26 5/16 × 30 3/16 × 41 7/16” Weight (with toner container) 82 kg / 180.8 lb. with toner containers Space required (W × D) 977 × 767 mm (using MP tray)

38 7/16 × 30 3/16” (using MP tray) Power source 120 V AC, 60 Hz, more than 12 A

220 - 240 V AC, 50/60 Hz, more than 7.2 A Ready 58dB(A) Noise Levels

ISO7779/ISO9296 Copy/Printing 69.5dB(A) 72.5dB(A) 75dB(A)

CS 3500i/4500i/5500i-01 May 16, 2011

Page 13

Printer Functions


Printing Speed Same as copying speed First print time (A4, feed from cassette)

6.2s or less 5.4s or less 4.9s or less

Resolution 600 x 600 dpi Operating System Windows 2000 (Service Pack 2 or later), Windows XP,

Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Apple Macintosh OS 10.x

Interface USB interface connector: 1 (USB Hi-speed) Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)

Page description language PRESCRIBE

Scanner functions


System Requirements CPU: 600 Mhz or higher RAM: 128 MB or more

Resolution 600 dpi, 400 dpi, 300 dpi, 200 dpi, 200 ×100 dpi, 200 × 400 dpi File format TIFF, JPEG, XPS, PDF (MMR/JPEG compression), PDF (high compression)

Simplex B/W : 80 images/min Color: 50 images/min

B/W : 75 images/min Color: 50 images/min

Scanning speed (A4 landscape, 300 dpi, Image quality: Text/Photo original

Duplex

DP-771


DP-770


Interface Ethernet (10 BASE-T/100 BASE-TX/1000 BASE-T) Network Protocol TCP/IP Transmission System PC transmission

SMB Scan to SMB FTP Scan to FTP, FTP over SSL E-mail transmission SMTP Scan to E-mail TWAIN scan*1 WIA scan*2

All Specifications are subject to change without notice.

CS 3500i/4500i/5500i-01 May 16, 2011

Page 14

DF-770/AK-730/PH-7A

Item Specifications Type Floor model Number of Trays Two tray Paper Weight 45 to 300 g/m2

When not stapling A3, B4, Ledger, Legal, Oficio II, 12×18", 8K: 500 sheets A4, A4R, B5, Letter, LetterR, 16K: 1000 sheets

When stapling 2 or 4 sheets A3, B4, Ledger, Legal, 8K: 220 sheets (55-110 sets) A4R, LetterR: 350 sheets (85-175 sets) A4, B5,Letter, 16K:350 sheets (85-175 sets)

When stapling 5 or 10 sheets A3, B4, Ledger, Legal, 8K: 250 sheets (20-50 sets) A4R, LetterR: 350 sheets (35-70 sets) A4, B5,Letter, 16K:350 sheets (35-70 sets)

When stapling 11 or 20 sheets A3, B4, Ledger, Legal, 8K: 300 sheets (15-30 sets) A4R, LetterR: 400 sheets (20-40 sets) A4, B5,Letter, 16K: 400 sheets (20-40 sets)

When stapling 21 or 30 sheets A3, B4, Ledger, Legal, 8K: 500 sheets (16-25 sets)

Tray capacity Main Tray (Tray A)

When stapling 21 or 50 sheets A4, A4R, B5, Letter, LetterR, 16K: 1000 sheets (20-50 sets) Tray capacity Sub Tray (Tray B)

A4, A4R, B5, Letter, LetterR, 16K: 100 sheets

Stapling capacity Paper weight 90 g/m2 or less

A3, B4, Ledger, Legal, 12×18", 8K: 30 sheets A4, A4R, B5, Letter, LetterR, 16K: 50 sheets

Power source Electrically connected to the machine Dimensions (W × D × H) 666 ×618.5 ×1013.5 mm

26 7/32 × 24 11 × 32 × 39 57/64” Weight Approx. 26.5 kg/Approx. 58.42 lb

Item Specifications Tray capacity Main Tray (Tray A)

When not stapling A3, B4, Ledger, Legal,Statement R, Folio, A4, A4R, B5, B5R, Letter, LetterR,12×18",8K,16K,16KR

Paper weight 45 to 300 g/m2

JS-730/731

Item Specifications Type Enclosed Hanger (right side) Number of trays 1 tray 1 tray Tray capacity 30 sheets (80 g/m2) 100 sheets (80 g/m2) Paper weight 45 to 300 g/m2 Paper size A3, B4,A4, A4R, A5R,B5, B5R, Folio,Ledger, Legal, Letter, LetterR,

Oficio II, 216 x 340mm, 8K, 16K Paper weight 60 to 256 g/m2 Power source Electrically connected to the

machine Dimensions (W × D × H) 443 ×392 ×102 mm

17 1/2 × 15 3/8 × 4 1/8” 337 ×442 ×150 mm 13 1/4 × 17 3/8 × 5 7/8”

Weight Approx. 0.8 kg/Approx. 1.8 lb Approx. 2.3 kg/Approx. 5.1 lb

CS 3500i/4500i/5500i-01 (revised) June 01, 2011

Page 15

DF-790

Item Specifications Type Floor model Number of Trays Three tray Paper Weight 45 to 300 g/m2

Main Tray (Tray A)

A3, B4, Ledger, Legal, 8K: 1500 sheets A4, A4R, B5, Letter, LetterR,16K: 4000 sheets A5R, B6R,Statement R:500 sheets

Sub Tray left (Tray B)

A3, B4, Ledger, Legal, 8K A4R, LetterR A4, B5,Letter, 16K:200 sheets

Tray capacity

Sub Tray right (Tray C)

LetterR: 350 sheets(35-70 sets) A4,A4R, B5,B5R,A6R,Letter,Letter R, 16K:100 sheets

Stapling capacity Paper weight 90 g/m2 or less

A4, A4R, B5,Letter,Letter R, 16K : 65 sheets(90 g/m2) : 70 sheets(64 g/m2)

Power source Electrically connected to the machine Dimensions (W × D × H) 607.2 ×668.5 ×1061.3 mm

23 29/32 × 26 5/16 × 41 25/32” Weight Approx. 40kg/Approx. 82.2 lb

BF-730

Item Specifications Foldable sizes A3, B4,A4R, Ledger, Legal,LetterR,8K

Center-folding Center-folding-Stapling 60 to 90 g/m2 : 16 sheets 91 to 120 g/m2 : 13 sheets Centerfold 60 to 90 g/m2 : 5 sheets 91 to120 g/m2 : 3 sheets 121 to 256 g/m2 : 1 sheet

Foldable number of sheets

Tri-folding 60 to 90 g/m2 : 5 sheets LTR(R) 91 to120 g/m2 : 3 sheets LTR(R)

Center-folding 5 or less copies in a set: 30 sets 6 to 10 copies in a set: 20 sets 11 to 16 copies in a set: 10 sets

Maximum number for storage

Tri-folding 1 or less copies in a set: 30 sets LTR(R) 2 to 5 copies in a set: 5 sets LTR(R)

Center-folding 60 to 256 g/m2 Paper weight Tri-folding 60 to 120 g/m2

CS 3500i/4500i/5500i-01 May 16, 2011

Page 16

MT-730

Item Specifications Number of trays 7 trays Paper size A3, B4, A4, A4R, B5, B5R, A5R, Folio, Ledger, Legal,

Letter, LetterR, statementR, 8K, 16K, 16KR A3, B4, Folio, Ledger, Legal 60 to 105 g/m2: 50 sheets 106 to 163 g/m2: 25 sheets

Maximum number for storage

A4, A4R, B5, B5R, A5R, Letter, LetterR, statementR, 8K, 16K, 16KR 60 to 105 g/m2: 100 sheets 106 to 163 g/m2: 50 sheets

Dimensions 510 (W) x 400 (D) x 470 (H) mm 20 1/16” (W) x 15 3/4” (D) x 18 1/2” (H)

Weight 10 kg or less/22 lbs or less

PH-7A

Item Specifications Tray capacity Main Tray (Tray A)

When not stapling A3, B4, Ledger, Legal,Statement R, Folio, A4, A4R, B5, B5R, Letter, LetterR,12×18",8K,16K,16KR

Paper weight 45 to 300 g/m2

Fax System (V)

Item Specifications Compatibility G3 Communication line Subscriber telephone line Transmission time 3 s or less (33600 bps, JBIG, ITU-T A4 #1 chart) Transmission speed 33600/31200/28800/26400/24000/21600/19200/16800/14400/12000/9600/

7200/4800/2400/1200/300 bps Coding scheme JBIG/MMR/MR/MH Error correction ECM Original size Max. width: 11"/297 mm

Max. length: 63"/1,600 mm Automatic document feed Max. 100 sheets (with optional DP) Scanner resolution Horizontal × Vertical

200 × 100 dpi Normal (8 dot/mm × 3.85 line/mm) 200 × 200 dpi Fine (8 dot/mm × 7.7 line/mm) 200 × 400 dpi Super fine (8 dot/mm × 15.4 line/mm) 400 × 400 dpi Ultra fine (16 dot/mm × 15.4 line/mm) 600 × 600 dpi

Printing resolution 600 × 600 dpi Gradations 256 shades (Error diffusion) One-Touch key 1000 keys Multi-Station transmission Max. 500 destinations Substitute memory reception 700 sheets or more (when using ITU-T A4 #1 chart) Image memory capacity 12 MB (standard) (for incoming faxed originals) Report output Sent result report, FAX RX result report, Report for job canceled before

sending, Activity report, Status page Option Dual FAX, expanded memory and internet FAX kit

CS 3500i/4500i/5500i-01 May 16, 2011

Page 17

DP-770

Item Specifications Original feed method Automatic feed Supported original types Sheet originals Original sizes Maximum: A3/Ledger

Minimum : A5R/StatementR Original weights Simplex: 45 to 160 g/m2

Duplex : 50 to 120 g/m2 Loading capacity 100 sheets (50 to 80 g/m2) or less

Mixed original sizes (auto selection) 30sheets (50 to 80 g/m2) maximum Power source Electrically connected to the machine. Dimensions (W × D × H) 577 × 534 × 180 mm

22 3/4 × 21 × 7 1/16” Weight 14.5 kg/32 lb or less

DP-771

Item Specifications Original feed method Automatic feed Supported original types Sheet originals Original sizes Maximum: A3/Ledger

Minimum : A5R/StatementR Original weights Simplex: 35 to 220 g/m2

Duplex : 50 to 220 g/m2 Loading capacity 175 sheets (50 to 80 g/m2) or less

Mixed original sizes (auto selection) 30sheets (50 to 80 g/m2) maximum Power source Electrically connected to the machine. Dimensions (W × D × H) 600 × 513 × 170 mm

23 5/8 × 20 3/16 × 6 11/16” Weight 14.5 kg/32 lb or less

PF-770

Item Specifications Paper weight 60 to 300g/m2 Paper types Plain (80g/m2 or less), Thick (256g/m2 or less), recycled Paper size A4, B5, Letter Paper capacity 3000 sheets (80g/m2) Dimensions 321 (W) x 504 (H) x 620 (D) mm

12 5/8” (W) x 19 13/16” (H) x 24 7/16” (D) Weight Approx. 25kg / Approx. 55.1 lbs Power source Electrically connected to the machine. (24 V DC)

CS 3500i/4500i/5500i-01 May 16, 2011

Page 18

BTU’s

Model Power

Consumption PPM Prints/Hr

Watts based on

PPM & Pr/Hr

Watts based on PPM & Pr/Hr

kW/hour Total BTU

Total Print (W)

Total Ready (W)

Print Ready (*3421.14)

740 170 35 500 176.2 129.5 0.3057 1043.1 740 170 35 1,000 352.4 89.0 0.4414 1506.2

3500i

740 170 35 2,100 740.0 0.0 0.7400 2525.0 860 170 45 500 159.3 138.5 0.2978 1016.1 860 170 45 1,000 318.5 107.0 0.4256 1452.1 860 170 45 2,000 637.0 44.1 0.6811 2324.0

4500i

860 170 45 2,700 860.0 0.0 0.8600 2934.4 970 170 55 500 147.0 144.2 0.2912 993.7 970 170 55 1,000 293.9 118.5 0.4124 1407.2 970 170 55 2,000 587.9 67.0 0.6548 2234.4

5500i

970 170 55 3,300 970.0 0.0 0.9700 3309.8 Total BTU’s are based on Prints per Minute, Prints per Hour. Watts are based on PPM & Pr/Hr and Kw/Hour.

POWER CONSUMPTION

Specification Main Body

US/Canada 120 V AC ±10%, 60Hz ±2%, 12A Voltage requirements Maximum 1800W Low Power Mode 100W or less Sleep Mode 15W or less Copy/Print 740W or less Ready 170W or less

3500i

Plug-in mode 1W or less Low Power Mode 100W or less Sleep Mode 15W or less Copy/Print 860W or less Ready 170W or less

4500i

Plug-in mode 1W or less Low Power Mode 100W or less Sleep Mode 15W or less Copy/Print 970W or less Ready 170W or less

5500i

Plug-in mode 1W or less US/Canada 12A

NEMA 5-15R Dedicated line

All Specifications are subject to change without notice.

CS 3500i/4500i/5500i-01 May 16, 2011

Page 19

INSTALLATION REQUIREMENTS

Installation Time 30 Minutes or less (Main Body Only) Standard Temperature 73.4 F (23 C) Standard Humidity 60%RH (Relative Humidity) Temperature Range 50 F ~ 90 F (10 C ~ 32.5 C) Humidity Range 15% ~ 80%RH Condensation and Humidity

Rapid Temperature change, Humidity drift, and condensation should be avoided

Altitude Maximum 8202 ft. (2500 meters) Illumination Maximum 1,500 lux Levelness Maximum levelness: 5mm (0.2inch)

The Printer must be placed on a level and sturdy surface

WEIGHT AND DIMENSIONS

Specification Width 26 5/16” Height 30 3/16” Depth 29 3/8 ” Weight (Main unit) 180.8 lbs. with Toner and Waste Toner box

MACHINE SPACE REQUIREMENTS

Allow sufficient access for proper operation and maintenance of the machine. Machine front: 100 cm/39 3/8" Machine rear: 10 cm/ 3 15/16" Machine right: 35 cm/13 3/4" Machine left: 30 cm/11 13/16" Machine top: 40 cm/15 3/4"

*All Specifications Subject to Change without Notice.

CS 3500i/4500i/5500i-01 (revised) May 26, 2011

Page 20

UTILITIES

NETWORK DESCRIPTION KMnet Admin v2.0.2813 KMnet Admin is Kyocera's unified device management

solution that uses a web-based platform to give network administrators easy and uncomplicated control of all network enabled printing devices. KMnet Admin is web-based, so no client software installation is necessary.

KM-NET Viewer Administrator Utility, which monitors Kyocera network devices with the ability to display and report device conditions via e-mail using SMTP.

Command Center RX Command Center RX features allow the user to access the User Box and carry out operations such as printing data, sending, and downloading. Download settings can be changed (such data as format, resolution, color mode), data stored inside the Box can be viewed as lists or thumbnails, or even as an image preview with the preview image feature. Other features include automatically updating of screens, customizing user screens and viewing department & restriction settings

ID Register v1.8.1511a Card Access Account Configuration Application FMU v1.1.1318 The File Management Utility (FMU) distributes

documents scanned on a multifunction print system (MFP) to specified network folders or computers. The user can set the criteria for distributing the scanned files. Advanced distribution criteria are available for certain MFPs.

Quick Set-up Utility Quick Set-up Utility for Network Administrators used to set-up IP Printing and Addresses on Network Printers.

PRINT Barcode Flash B/C

One and two Dimensional PCL compatible Barcode Fonts stored on Compact Flash Card technology.

KM-NET for Direct Printing v2.4.1304

Allows Direct Printing of Adobe PDF’s without launching Adobe’s Acrobat or Acrobat Reader applications.

CS 3500i/4500i/5500i-01 May 16, 2011

Page 21

PRINT DRIVERS Print Drivers can be downloaded from KMAconnect and kyoceramita.com. Note: Drivers and Descriptions are periodically updated and versions posted in the future may not match this chart.

Description Version Operating System Kyocera TASKalfa MFP KPDL Uni Driver 8.4 for Win XP, 2003, Vista, 2008, Windows 7

8.4 Windows XP, 2003, Vista, 2008, Windows 7

Kyocera TASKalfa MFP KX Print Driver 5.2.1327d for Win XP, 2003, Vista, 2008, Windows 7 (32-bit)

5.2.1327d Windows XP, 2003, Vista, 2008, Windows 7 (32-bit)

Kyocera TASKalfa MFP KX Print Driver 5.2.1327d for Win XP, 2003, Vista, 2008, Windows 7 (64-bit)

5.2.1327d Windows XP, 2003, Vista, 2008, Windows 7 (64-bit)

Kyocera TASKalfa MFP KX XPS Print Driver 1.2.1327d for Win Vista, 2008, Windows 7 (32-bit)

1.2.1327d Windows Vista/Server 2008 (32-bit)

Kyocera TASKalfa MFP KX XPS Print Driver 1.2.1327d for Win Vista, 2008, Windows 7 (64-bit)

1.2.1327d Windows Vista, 2008, Windows 7 (64-bit)

Kyocera TASKalfa MFP PCL Uni Driver 1.0 for Win XP, 2003, Vista, 2008, Windows 7

1.0 Windows XP, 2003, Vista, 2008, Windows 7

Kyocera TASKalfa MFP Twain Driver 1.8.1402 for Win XP, 2003, Vista, 2008, Windows 7

1.8.1402 Windows XP, 2003, Vista, 2008, Windows 7

Kyocera TASKalfa MFP WIA Driver 1.8.1331 for Win Vista, 2008, Windows 7 (Network Only)

1.8.1331 Windows Vista, 2008, Windows 7

Kyocera TASKalfa MFP NDPS Driver 5.2.1327d for Win XP

5.2.1327d Windows XP

Kyocera TASKalfa MFP Network Fax Driver 3.7.1503 for Win XP, 2003, Vista, 2008, Windows 7

3.7.1503 Windows XP, 2003, Vista, 2008, Windows 7

Kyocera TASKalfa MFP OSX 10.2 and 10.3 Installer

8.4 OSX 10.2 and 10.3

Kyocera TASKalfa MFP OSX 10.4 Installer 8.4 OSX 10.4 Kyocera TASKalfa MFP OSX 10.5 and 10.6 Installer

8.4 10.5 and 10.6 Installer

Kyocera TASKalfa MFP Linux PPD 8.4 Linux

CS 3500i/4500i/5500i-01 May 16, 2011

Page 22

PRODUCT CONFIGURATION

DP-770/DP-771

PF-770

DF-770/PH-7A

DF-790/BF-730/PH-7A

MT-790 Fax System (V)

MM-16-128 Fax Memory

IB-50 Gigabit

Ethernet

PF-730

PF-740

See Page 3 for a complete list of Options

CS 3500i/4500i/5500i-01 (revised) May 26, 2011

Page 23

ACCESSORY COMPATIBILITY Color B/W Color B/W

Model 3050ci 3550ci

4550ci 5550ci

3500i 4500i 5500i

6550ci 7550ci

8000i 6500i

Paper Feeder PF-730 500 x 2 Y Y(x2) Y Y Y PF-740 1,500 x 1 Y Y(x2) Y Y Y PF-770 A4 side Deck 3,000 Y Y Y Y Y

PF-780 Multi Media Tray N Y

Requires a PF-730 or PF-740

N Y

Requires a PF-730 or PF-740

Y Requires a

PF-730 or PF-740Document Processor

Platen Cover E Y Y Y N N

DP-770 RADF Y Y Y N N DP-771 Dual Scan DP Y Y Y N N

Document Finisher DF-770 1,000 sheet Y Y Y N N DF-790 4,000 sheet Y Y Y Y Y BF-730 Booklet folder Y Y Y Y Y PH-7x punch unit Y Y Y Y Y MT-730 Mail box Y Y Y Y Y

Other

JS-730 Job separator(inner) Y Y Y Standard built-in Standard built-in

JS-731 Job separator Y Y Y Standard built-in Standard built-inFAX System (V) FAX Y(x2) Y(x2) Y(x2) Y(x2) Y(x2)

Printing System (11)

Fiery Y Y N N N

Printing System (12)

Fiery N N N Y Y

Printing System Interface Kit (A)

Fiery Controller Adapter

Required with Printing System

(11)


(11) N


(12) N

AK-730 Bridge Unit Attachment Kit

Y Required when attaching a DF-770 or DF-790

Y Required when attaching a DF-770 or DF-790

Y Required when

attaching a DF-770 or

DF-790

Standard Standard

The 6550ci/7550ci/6500i/8000i has a standard Document Processor that is unique to these models. A JS-730 cannot be installed with a DF-770 or DF-790 Finisher. Y- YES or Available N- Not Compatible or Not Available

Key Boards

Adesso ACK-595 USB Y Y Y Y Y Cherry ML 4100 USB Y Y Y Y Y

Other USB Key Boards are compatible. Please check size of the Key board to ensure it fits the Keyboard Mount

CS 3500i/4500i/5500i-01 May 16, 2011

Page 24

SK-720 MFP STABLIZERS The Stabilizers are included with a PF-730 or PF-740. They should be installed when the configuration does not consist of a Side Paper Feeder or Finisher.

DP-770 or DP-771

PF-730 or PF-740

SK-720

5550ci 4550ci 3550ci 3050ci

3500i 4500i 5500i

cs 3500i-4500i-5500ientb1r2

Documents