CS 4731: Computer GraphicsLecture 24: Color Science

Emmanuel Agu

Basics Of Color

Elements of color:

What is color?

Color is defined many ways Physical definition

Wavelength of photons Electromagnetic spectrum: infra-red to ultra-violet

But so much more than that… Excitation of photosensitive molecules in eye Electrical impulses through optical nerves Interpretation by brain

Introduction

Color description: Red, greyish blue, white, dark green… Computer Scientist:

Hue: dominant wavelength, color we see Saturation

• how pure the mixture of wavelength is• How far is the color from gray (pink is less saturated than red, sky

blue is less saturated than royal blue) Lightness/brightness: how intense/bright is the light

The Human Eye

The eye: The retina

Rods Cones

• Color!

The Human Eye

The center of the retina is a densely packed region called the fovea. Eye has about 6- 7 million cones Cones much denser here than the periphery

The Human Eye

Rods: relatively insensitive to color, detail Good at seeing in dim light, general object form

Human eye can distinguish 128 different hues of color 20 different saturations of a given hue

Visible spectrum: about 380nm to 720nm Hue, luminance, saturation useful for describing color Given a color, tough to derive HSL though

Tristimulus theory

3 types of cones Loosely identify as R, G, and

B cones Each is sensitive to its own

spectrum of wavelengths Combination of cone cell

stimulations give perception of COLOR

The Human Eye: Cones

Three types of cones: L or R, most sensitive to red light (610 nm) M or G, most sensitive to green light (560 nm) S or B, most sensitive to blue light (430 nm)

Color blindness results from missing cone type(s)

The Human Eye: Seeing Color

The tristimulus curve shows overlaps, and different levels of responses

Eyes more sensitive around 550nm, can distinquish smaller differences

What color do we see the best? Yellow-green at 550 nm

What color do we see the worst? Blue at 440 nm

Color Spaces

Three types of cones suggests color is a 3D quantity. How to define 3D color space? Color matching idea:

shine given wavelength () on a screen Mix three other wavelengths (R,G,B) on same screen. Have user adjust intensity of RGB until colors are identical:

CIE Color Space

CIE (Commission Internationale d’Eclairage) came up with three hypothetical lights X, Y, and Z with these spectra:

Idea: any wavelength can be matched perceptually by positive combinations of X,Y,Z

CIE created table of XYZ values for all visible colors

Note that:X ~ RY ~ GZ ~ B

CIE Color Space

The gamut of all colors perceivable is thus a three-dimensional shape in X,Y,Z

Color = X’X + Y’Y + Z’Z

CIE Chromaticity Diagram (1931)

•For simplicity, we often project to the 2D plane •Also normalize

X’+Y’+Z’=1X’’ = X’ / (X’+Y’+Z’)Y’’ = Y’ / (X’+Y’+Z’)Z’’ = 1 – X’’ – Y’’

•Note: Inside horseshoe visible, outside invisible to eye

CIE uses

Find complementary colors: equal linear distances from white in opposite directions

Measure hue and saturation: extend line from color to white till it cuts horseshoe (hue) Saturation is ratio of distances color-to-white/hue-to-white

Define and compare device color gamut (color ranges) Problem: not perceptually uniform:

Same amount of changes in different directions generate perceived difference that are not equal

CIE LUV - uniform

Color Spaces

CIE very exact, defined Alternate lingo may be better for other domains Artists: tint, tone shade CG: Hue, saturation, luminance Many different color spaces

RGB CMY HLS HSV Color Model And more…..

Combining Colors: Additive and Subtractive

Additive (RGB) Subtractive (CMYK)

Add componentsRemove components from white

Some color spaces are additive, others are subtractive Examples: Additive (light) and subtractive (paint)

RGB Color Space

Define colors with (r, g, b) amounts of red, green, and blue Most popular Additive

CMY

Subtractive For printing Cyan, Magenta, Yellow Sometimes black (K) is

also used for richer black (c, m, y) means subtract

the c, m, y of the compliments of C (red) M (green) and Y (blue)

HLS

Hue, Lightness, Saturation Based on warped RGB cube Look from (1,1,1) to (0,0,0) or RGB

cube All hues then lie on hexagon Express hue as angle in degrees 0 degrees: red

HSV Color Space

A more intuitive color space H = Hue S = Saturation V = Value (or brightness)

Based on artist Tint, Shade, Tone

Similar to HLS in concept

ValueSaturation

Hue

Converting Color Spaces

Converting between color models can also be expressed as such a matrix transform:

105.1033.0424.0

333.0029.2145.1

138.0110.1739.2

ZYXBGR

Color Quantization

True color can be quite large in actual description Sometimes need to reduce size Example: take a true-color description from database and

convert to web image format Replace true-color with “best match” from smaller subset Quantization algorithms:

Uniform quantization Popularity algorithm Median-cut algorithm Octree algorithm

Gamma Correction

Color spaces, RGB, HLS, etc are all linear. E.g. (0.1,0.1,0.1) in RGB is half the intensity of (0.2,0.2,0.2) However, CRT Intensity: I=kN

N is no. of electrons hitting screen (voltage), related to pixel value k and are constants for each monitor

Intensity-voltage relationship is non-linear, different min/max N for different devices

Gamma correction: make relationship linear, match up intensity on different devices

How? Invert above equation so that N = (I/k)1/

Choose k and so that I becomes linearly related to N

Gamma Correction

Typical gamma values in range [1.7 – 2.3] E.g. NTSC TV standard in US defines gamma = 2.2 Some monitors perform the gamma correction in hardware

(SGI’s) Others do not (most PCs) Tough to generate images that look good on both platforms

(i.e. images from web pages)

Device Color Gamuts

Since X, Y, and Z are hypothetical light sources, no real device can produce the entire gamut of perceivable color

Depends on physical means of producing color on device Example: R,G,B phosphors on CRT monitor

Device Color Gamuts

The RGB color cube sits within CIE color space We can use the CIE chromaticity diagram to compare the

gamuts of various devices E.g. compare color printer and monitor color gamuts

References

Hill, chapter 12