ctast·l f-clamp - ideal type 301 catalog number ks-3 l

Click here to load reader

Post on 19-Mar-2018

239 views

Category:

Documents

7 download

Embed Size (px)

TRANSCRIPT

  • ctASTl F-ClampPREFORMED AND OPEN END PUNCH-TYPE HOSE CLAMPS

    FAST LOK Open End Clamp

    Preformed Clamps are double wrapped and formed to a given diameter. Used primarily where one end of the hose or article is free to allow the clamps to be slid over the hose end before the fitting is inserted. Preformed clamps range in size from 13/16 inch I.D. to 8 inch I.D.; all clamps may be pulled down to a smaller diameter but cannot be adjusted to a larger diameter.

    Open End Clamps are of the same general construction as the preformed clamps with this exception, the double wrapping of the band around the hose or article is a part of the application. The open end clamps are used when one end or both, of the article to be clamped Is not free, or an obstruction prevents slipping a preformed clamp over the end. Open End Clamps range in size from 13/16 inch I.D. to 48 inch I.D.

    Galvanized Preformed Clamps 2 1 /2 Inch I.D. and above, and 5/8" wide open end clamps have a stainless steel lok for greater strength and rigidity.

    AVAILABLE IN YOUR AREA FROM

    FAST LOK Preformed Clamp

    Double-Wrapped Triple-Punched Holds Permanently

    Ask for a current price list at your distributor or

    write for literature.

  • GALVANIZED

    STEEL

    Catalog Number F-3 F-311F-4F-5

    F-CLAMPREFORMED CLAMPS

    (3/8 11 AND 5/8" (NOMINAL) WIDTH)

    Band Width Clamp 1.0. Clamps & Thickness Inches Per Pkg.

    3/o X .025 13/16 11 100 3/a X .025 13/a" 100 5/a X .025 111 100 5/a X .025 1" 100

    STAINLESS STEEL

    Catalog Number

    --

    FS-3 FS-311 FS-4 FS-5

    Band Width & Thickness 3/a X .020 3/e X .020 5/e X .022 5/9 X .022

    HEAVY DUTY BANDS F-6 5/e X .031 1" 100 FS-6 5/a X .022 F-7 6/9 X .031 1" 100 FS-7 5/a X .022 F-8 5/a X .031 2" 100 FS-8 5/a X .022 F-9 5/e X .031 2" 100 FS-9 5/a X .022

    WITH STAINLESS STEEL LOKS F-10 5/e X .031 2" 50 FS-10 5/a X .022 F-11 5/a X .031 2" 50 FS-11 5/o X .022 F-12 5/e X .031 311 50 FS-12 5/e X .022 F-14 5/9 X .031 3" 50 FS-14 5/e X .022 F-16 6/a X .031 4"' 25 FS-16 5/e X .022 F-18 5/a X .031 4" 25 FS-18 5/e X .022 F-20 5/e X .031 5" 25 FS-20 5/a X .022 F-24 6/a X .031 6" 25 FS-24 5/a X .022 F-28 5/e X .031 7" 25 FS-28 5/a X .022 F-32 5/a X .031 8" 25 FS-32 5/a X .022

    OPEN END CLAMPS

    (3/8" AND 5/8 11 (NOMINAL) WIDTH) GALVANIZED STEEL

    Catalog NumberF0-3 F0-311 F0-316 F0-325

    Band Width & Thickness3/9 X .022 3/a X .022 3/9 X .022 3/e X .022

    iwlTH STAINLESS STEEL LOKS F0-8 5/a X .025 F0-10 I 5/e X .025

    HEAVY DUTY BANDS F0-12 5/e x.031 F0-14 5/e X .031 F0-16 5/e X .031 F0-18 5/a X .031F0-20 5/a X .031F0-24 5/a X .031 F0-28 o/a X .031 F0-32 % X .031 F0-36 o/e X .031 F0-40 5/e x.031 F0-48 o/a X .031 F0-56 5/a X .031 F0-64 5/e X .031 F0-72 o/s X ,031 F0-80 o/a X .031 F0-96 5/a X .031 F0-120 5/e X .031 F0-144 5/s X ,031 F0-168 5/a X .031 F0-192 o/e X .031

    Clamp I.D.Inches 13/16" 13/8 112" 31/e

    2" 2 11

    3" 3 11 411 4 11 511 5117115 11 911

    10 11 12" 14" 16" 18" 20 11 24" 30 11 36 11 42 11 48"

    Clamps Per Pkg.100 100 100 100

    100 50

    50 50 50 50 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10

    STAINLESS STEEL

    Catalog Number

    FOS-3 FOS-311 FOS-316 FOS-325

    FOS-8 FOS-10

    FOS-12 FOS-14 FOS-16 FOS-18 FOS-20 FOS-24 FOS-28FOS-32 FOS-36 FOS-40 FOS-48 FOS-56 FOS-64 FOS-72 FOS-80 FOS-96 FOS-120 FOS-144 FOS-168 FOS-192

    I Band Width & Thickness 3/a X .020 3/e X .020 3/9 X .020 3/e X .020

    5/e X .022 5/a X .022

    5/a X .022 6/a X .022 5/9 X .022 5/a X .022 5/e X .022 5/e X .022 6/9 X .022 6/a X .022 5/e X .022 5/a X .022 5/a X .022 o/e X .022 5/s X .022 5/e X .022 5/a X .022 o/s X .022 5/e X .022 5/e X .022 5/e X .022 % X .022

    and TOOL PREFORMED AND OPEN END CLA.MPS are available in various materials and widths to satisfy a wide variety of applications; Galvanized Steel and Stainless Steel; 3/8" & 5/8" (Nominal) widths.

    TO ORDER the correct size Fast Lok Clamps, measure the outside diameter of the hose or article and then select the next larger inside diameter clamp by catalog number.

    APPLICATION TOOLS available from FastLok: For 3/8" and 5/8" widths ... F-38, F-40, F-100.

    F-38

    Laking Tool

    Intermediate sizetool with antiback lash ratchet.

    F-100

    Laking Tool (Revised F-1)

    t F-225Mallet

    a

    IDEAL CLAMP PRODUCTS, INC. 8100 TRIDON DRIVE SMYRNA, TN 37167 800-251-3220 | 615-459-5800

  • PREFORMED HOSE CLAMPS

    Punch Indentation for ease .of center pu ..

    Heavy Duty Lok for greater strength and rigidity

    K-Clamps may be secured by either a punch or fold-up method.(See cross sectioned views below)

    Center Punched Fold-up

    Less tension loss. Patented hole in inner band gives better internal mechanical locking after punching. AVAILABLE IN YOUR AREA FROM

    Ask for a current price 11st at your distributor or

    write for literature.

  • K-CLAMPS and TOOLS

    GALVANIZED

    STEEL

    Catalog Number

    K-3K-311K-4K-5K-6K-7K-8K-9K10 K-11K-12K-14K-16K-18K-20K-24K-28K-32

    PREFORMED CLAMPS

    (3/8" AND 5/8" (NOMINAL} WIDTH}

    Clamp 1.0. Inches 13/16 tl

    1" 1" 1" 1" 1tl

    2" 2" 2" 2tl

    3" 3" 4"

    41/2 ti

    5" 6" 7t1

    Btl

    Band Width & Thickness 3/a" X .025 3/a" X .025 5/a t1 X .0305/a" X .030 5/a" X .030 5/a" X .030 5/a t1 X .030%

    t1 X .030 5/a" X .030 5/a t1 X .030 5/a t1 X .030 5/a" X .030 51a t1 X .0305/a t1 X .030 5/a" X .030 51a t1 X .0305/a" X .030 5/a" X .030

    Clamps per Pka.

    100 100 100 100 100 100 100 100

    50 50 50 50 25 25 25 25 25 25

    PREFORMED CLAMPS

    (3/4" (NOMINAL} WIDTH}

    STAINLESS

    STEEL

    TYPE 301

    Catalog Number

    KS-3 l

  • he [?[bJ-Cla PREFORMED HOSE CLAMPS

    KA001

    FOLD-UP ADAPTER

    KS001

    WIND-UP TOOL

    J-Clamps are available in 3/a", 5/a" and" widths, from 13/15" to 8"I.D. These none punch type clamps are to be secured by the foldup method, using the WIND-UP tool, our part no. KS001 andadapter KA001.

  • LA

    PREFORMED CLAMPS

    GALVANIZED STAINLESS

    STEEL STEEL

    3/8" ( NOMINAL WIDTH ) TYPE 301

    CATALOG CLAMP I.D. BAND WIDTH CLAMPS CATALOG

    NUMBER INCHES

    FLJ 301 13/16"

    FLJ 343 1II

    FLJ 302 1 3/8"

    FLJ 345 2"

    FLJ 346 3"

    N/A 3 1 /4"

    FLJ 303 1 "

    FLJ 304 1 1 /4"

    FLJ 305 1 1 /2"

    FLJ 306 1 3/4"

    FLJ 307 2"

    FLJ 308 2 1 /4"

    FLJ 309 2 1 /2"

    FLJ 327 2"

    FLJ 310 2 3/4"

    FLJ 311 3"

    FLJ 312 3 1/2"

    FLJ 313 4"

    FLJ 314 4 1 /2"

    FLJ 315 5"

    FLJ 316 6"

    FLJ 318 7"

    FLJ 319 8"

    IDEAL CLAMP PRODUCTS, INC. 8100 TRIDON DRIVE SMYRNA, TN 37167 800-251-3220 | 615-459-5800

    & THICKNESS PER PKG. NUMBER

    3/8" X .025 100 FLJ 201

    3/8" X .025 100 FLJ 243

    3/8" X .025 100 FLJ 202

    3/8" X .025 100 FLJ 245

    3/8" X .025 100 FLJ 246

    3/8" X .025 100 FLJ 255

    5/8" ( NOMINAL WIDTH )

    5/8" X .030 100 FLJ 203

    5/8" X .030 100 FLJ 204

    5/8" X .030 100 FLJ 205

    5/8" X .030 100 FLJ 206

    5/8" X .030 100 FLJ 207

    5/8" X .030 100 FLJ 208

    5/8" X .030 100 FLJ 209

    3/4" ( NOMINAL WIDTH )

    3/4" X .030 100 FLJ 227

    3/4" X .030 50 FLJ 210

    3/4" X .030 50 FLJ 211

    3/4" X .030 50 FLJ 212

    3/4" X .030 25 FLJ 213

    3/4" X .030 25 FLJ 214

    3/4" X .030 25 FLJ 215

    3/4" X .030 25 FLJ 216

    3/4" X .030 25 FLJ 218

    3/4" X .030 25 FLJ 219

    316 STAINLESS AVAILABLE UPON REQUEST

    AVAILABLE IN YOUR AREA FROM

    FLJ895

    l

  • e [?f1JS-Cla SMOOTH I.D. CLAMPS

    KADD1

    FOLD-UP ADAPTER

    KS001

    WIND-UP TOOL

    Fast Lok JS - clamps are double wrapped clamps with a more smooth inside diameter, intended for your thermoplastic and other thinner wall hose clamping applications. The JS series clamps slide on the hose prior to inserting the fitting.

    Preformed JS - Clamps are available in 5/a and inch widths, 1 inch I.D. to 8 inch 1.0. in inch increments. The clamps are produced from galvanized or stainless steel, the locks are stainless steel.

    The Fast Lok JS - clamp is intended to be applied with a Fast Lok, l

  • -CL M

    SMOOTH I.D. CLAMPS

    GALVANIZED STAINLESS

    STEEL STEEL

    5/8" ( NOMINAL WIDTH) TYPE 301

    CATALOG CLAMP I.D. BAND WIDTH CLAMPS CATALOG

    NUMBER INCHES & THICl

  • Please use the Part Numbers when placing orders. (The illustrations are not in correct proportion to one another).

    QTY. Part Per Tool Descri tion

    Punch Head 1 Punch 1 Punch Head Pin 1 Pusher Nose 1 Holding Dog 1 Pusher Nose Pin 1 Holding Dog Spring 2 Puller Links 2 Puller Links

    Puller Link Pin Pulling Dog Pulling Dog Spring Pulling Dog Pin

    1 Ball Handle Assy 1 3/8" Clamp Adapter

    Pusher Puller Assy 3 Retaining Rings

    Cresent Ring Punch Retainer Ring

    1 Pulling Dog 1 Pulling Dog Spring 2 Puller Links 2 Puller Links

    VIEW1

    (

    VIEW3

    Part Number F-202

    FX-201 F-202F-233F-206F-207

    F-208

    F-208 FX-211 B F-212

    F-209

    /FY-214

    F-206

    FX-211 A

    FY-217F-209

    FX-211AFX-211 B F-212FY-214FY-217F-233

    F-233

    ' FA-220 F-242

    FA-220

    . F-232

    F-229HT FA-231

    F-235

    F-229HT0 C 0 FA-231

    F-242F-232F-235

    Sliding Jack Replacement Kit No. FY205K FY-214 FY-217 FX- 211A FX-2118

    (Kit Fits The F-1,F-100, F-175, & the C-2 Tools)

    INSTRUCTIONS FOR OPERATING

    TOOL No. F-100

    Hold Laking Tool as shown with b