Cubot V2 Users Manual

Catalogue Assemble the band--------------------------------------------------------1

Activate---------------------------------------------------------------------------------------1

Wear------------------------------------------------------------------------------------------1

Hardware Features----------------------------------------------------------1 Touch and Use------------------------------------------------------------------------------1

Interface--------------------------------------------------------------------------------------2

Download and install APP----------------------------------------------------------------------------------------2

Download and Install-------------------------------------------------------------------------2

Settings for personal information------------------------------------------------------------2

Bind the device and data synchronization (interface of steps/ sleep / heart rate)--------------------------------------------------------------------------3

Bind the Device-------------------------------------------------------------------------------3

Data synchronization--------------------------------------------------------------------------3

On /off----------------------------------------------------------------------------------------4

Steps Interface--------------------------------------------------------------------------------4

Sleep Interface--------------------------------------------------------------------------------5

Heart Rate Interface--------------------------------------------------------------------------5

Health Management---------------------------------------------------------------------------------------------------6

Steps target----------------------------------------------------------------------------------6

Heart rate warning----------------------------------------------------------------------------6

24-hour monitoring---------------------------------------------------------------------------6

Alarm / Reminder--------------------------------------------------------------------------------------------------------7

Alarm Setting----------------------------------------------------------------------------------7

Sleep Preference-------------------------------------------------------------------------------7

Calls / SMS / WeChat Reminder---------------------------------------------------------------7

Sedentary Reminder----------------------------------------------------------------------------8

GPS--------------------------------------------------------------------------8

REMOTE CAMERA-----------------------------------------------------------------------------------------------------------9

Device Management-------------------------------------------------------------------------------------------------------9

Bind/unbind--------------------------------------------------------------------------------------9

Intelligent anti-lost-------------------------------------------------------------------------------9

Turn the wrist and brighten the screen---------------------------------------------------------10

Unit Conversion----------------------------------------------------------------------------------10

Time setting--------------------------------------------------------------------------------------10

About--------------------------------------------------------------------------11 Charge the band----------------------------------------------------------------11

USB cable CUBOT V2 band

ulna

Cubot V2 Users Manual

1. Activate(for the first time) and wear

1.1 Please connect the band with USB cable ,then charge by inserting into computer port or the

charger ,which activates the band .

1.2 When the band has been activated ,it shows the interface like :

1.3 Put the band at the right place and make sure your ulna is exposed , the heart rate sensor at back need

clinging to your skin .

2. Hardware features :

2.1 Touch and use

Touch the screen ,brighten it

Slide from left or right ,touch the screen to have page turning ,then you check all function interfaces .

2.2 Function interfaces .

3. Download and install the APP:

3.1 Click and download the app. Open "CUBOT v2" , make sure the phone is connecting to the network

(Wifi or mobile GPRS);

3.2 Scan QR code or enter major application store to download and install "CUBOT V2" (I Phone users go

to APP Store ,search and download. Android users go to Google Play Store ,search and download).

3.3 Personal information settings

3.3.1 Open the phone Bluetooth, start CubotV2 APP, for the first time use, there will be notification to set your personal

information: height , gender, weight, date of birth, steps target;

3.3.2 Users click personal profile and enter into “my” interface from the menu , fulfill every item .

click the head portrait items

3.3.3 Enter into the information setting interface ,slide and choose the number ,click ok to finish personal

information setting .

click the menu then enter the

menu bar ,click head portrait

to set personal information.

there will be a notification

when you set it for the first

time.

Renew the head

portrait ,there will be a

notification ,you can

choose shooting or

pick an image from the

gallery

click here to make

a nickname

Click and set the gender ,date

of birth ,height ,weight in turn.

there will be a suggestive

target given to you based on

your information.

Time ,date ,show

battery. steps . calories. Distance.

Heart rate.

菜单栏

Gender setting Birthday Height setting Weight setting

4. Bind the device and data synchronization (interface of steps / sleep / heart rate)

4.1 Bind the device

4.1.1 Open the app interface ,then click on top left, there will be a menu on the side bar.

4.1.2 Choose “Binding management ”,enter “binding interface” and bind the device, pick your band . After

binding , there will be a icon .

Notification :you could enter the next menu only when you bind the device .

click the menu bar choose device management choose binding management bind the device successfully

4.2 Data synchronization and the record

4.2.1 After binding successfully ,it will go to steps interface and automatically synchronize data .you slide from left or right

to have the page turning and switch the steps interface 、sleep interface 、the menu、the heart rate interface.

4.2.2 The band synchronize the data with App and auto regulation. Then later ,each time you open Cubot V2 APP, the

data automatically synchronizes once .

4.2.3 In the steps/ sleep interface ,Scroll down the menu and manually synchronize the data

monents

On the top right

of Steps/sleep

interface

Back

Click to back the previous

menu

单

Click the moments ,there will be

a note bar ,you choose one

platform to share

Menu

On the top left of

Steps/sleep

interface

(you need to ensure the band and the Bluetooth of the phone connection is normal)

4.2.4 Steps and sleep interface ,click the progress circle and check the historical record .

On and off

Slide from left or right , switch to the steps interface/sleep interface/menu interface/ heart rate interface .

click share bar beneath ,choose

a platform to share

Slide and switch

day/week/month

Click and jump to the

goal interface

1.scroll down the

drop-down list

2.click the progress to

see historical records

“Steps” interface

“Sleep” interface

1， click the drop down box to synchronize the data manually,

2， 2click the “progress” circle and check the records

click to switch

day/week/month

Slide and switch

day/week/month

click to switch

day/week/month

Click “start measuring ”to use

real time heart rate function ,click

“finish measuring ”to quit .

click to switch

day/week/month

Slide and switch

day/week/month

1.scroll down the drop-down

list

2.click the progress to see

historical records

“Heart rate” interface

5. Health management

5.1 Sports target

5.1.1 Choose “health management” and enter health management interface

5.1.2 click “sport target” and enter sport target setting interface

5.1.3 slide and set the sports target. Click ok and finish the setting .

( when you achieve your target steps ,there will be an icon and the band will vibrate.）

Choose the health management Click the sport target Set the target

5.2 open the heart rate warning and enter heart rate interface ,slide and choose the number then confirm .

The simplest way to count the heart rate is 220 subtract your age (App will also predict your heart rate

warning data according to your personal information)

5.3Open the "24 hour monitoring" switch, click the health management interface and open "24 hours

monitoring" switch, use all-day heart rate monitoring function ,the band will automatically monitor the heart

rate regularly, and the heart rate data will be uploaded to APP and do the heart rate curve line (you should

wear at least 30 minutes to collect the heart rate data), when you switch off the band, all-day monitoring will

be finished.

6. Alarm/ reminder

6.1 Alarm setting

6.1.1Click the "Alarm / reminder" menu, enter alarm / reminder interface, click anywhere of this area then get

into alarm settings page;

6.1.2 In the "alarm clock time" ,click any area, there will be "Time Settings" interface, in a digital area ,choose

the right time . click “confirm” and set the time successfully.

6.1.3. In the "Alarm clock name", you can customize the alarm name.

6.1.4. For the date in "repetition period " , you can select anyone randomly ,click “confirm” to set the time

successfully.

(open these three Alarms , Cubot V2 will remind :when you close it ,no reminder.

6.2 Sleep preference

6.2.1. Open “sleep preferences” then click anywhere to enter sleep Preferences page,

6.2.2. Choose “fall sleep or wake up”, the interface will pop up "time settings" ,

6.2.3. Slide up and down the digital area then set sleep / wake time, “confirm” means setting successfully.

6.3Call/messages/wechat reminder

6.3.1 Open call/messages/wechat reminder ,When there is calls/messages/wechat messages/,App will

deliver the information

(alarm reminder 、call reminder 、messages reminder 、wechat reminder ；)

Operation reminder :alarm 、sleep preference、call/messages/wechat

Open call

reminder/m

essage

reminder/w

echat

reminder,

app will

deliver

Sedentary

reminder

6.4 Sedentary reminder: open it and set the time to remind. when the time is up ,there will be a sign in

the display of the band. ( there will be no reminder in the period if you walk more than100 steps )

Click anyone and

choose

“alarm/reminder”

click here，and set the

alarm time

click here and

name the alarm

click here to

set what day in

a week

Open “sleep

preference”

and enter

sleep setting

interface

Click “fall asleep” or

“wake up” and set

the sleep time

Time setting box,

slide up and

down to choose

the time of alarm

and

sleep ,confirm it .

click here and

enter

sedentary

reminder

setting box

click here and

enter sedentary

reminder setting

box

slide up and

down to set

how long

for

sedentary

time

slide up and

down to set

sedentary

time period

choose what

day in a week

to remind

Click “ start to jogging” , you begin the

track to sport.

Press this button long press to pause ,you

choose stop or continue. Cilck her to view

this exercise record

Warm tips :

.before using the band ,you need to connect it with APP and calibrate the automatic synchronization of time

and data, otherwise the steps and sleep data will be wrong

.If the APP is unable to search the device after twice search connection, go to the phone settings and ignore

the paired devices and switch on Bluetooth again

.In static state, except for alarm clock ,other reminders will be closed

7.GPS movement

7.1 select "GPS" in the menu bar interface, enter the "running" interface, click "start running", enter the track

interface and start running.

(APP will draw the trajectory based on your line of motion. )

7.2 click the track interface below the "long press pause", you will end or continue. Click on the button , you

can check the exercise time, distance, speed, calories

8. Remote camera

8.1 in the APP menu bar, select remote camera interface, enter the picture page, the mobile phone camera

shooting through the remote control, there will be an icon in display, click the icon to complete shooting.

9 Device management

9.1 Binding /unbinding management

Bind the device (check item4.1 at the third page for details)

9.1.2 Get into the binding device interface, click unbinding it pops up unbinding tips , confirm it to complete

unbinding. When the distance between the band and APP surpass the effective distance, the Bluetooth will

automatically disconnect and show , the band vibrate to remind.

9.2 Intelligent anti –lost

9.2.1 Search for the device: Open the menu bar ,click the device management, enter the device management

interface, select intelligent anti lost, click search device button , the band will vibrate to remind. App will pop

up a notification box

9.2.2 intelligent warning: click intelligent warning , there will be a notification box , open it , and open all items

like “push reminder/ vibration reminder /ring reminder .When APP disconnected with the band ,there will be

warning .

9.3 The RSSI :When you search for the band ,the smaller of RSSI ,the distance is closer.

choose device management choose intelligent anti-lost

search for the device or intelligent alarm switch on intelligent alarm

9.3 Turn over your wrist and brighten the display: open the switch .lift your wrist and keep your palm down ,

you can light up the display.

9.4 units conversion: click the device management interface, start ,you set the metric or

British system , the band will make a synchronous conversion.

Metric system British system

time setting : in the device management interface ,click and make 12 hour setting or 24 hour setting.

12hour setting 24hour setting

10.About

10.1 open the sidebar menu, click the interface;

10.2 click the help, it pops up guidelines, click one by one, users will know the operation instructions

10.3 click "about us" to enter the "us" interface, the user can understand the company's product information.

11.charge for the band

When the band shows a low power icon, indicating that the battery is not enough , you need to connect your

band with the computer or power bank through USB cable , the charging time is about 1.5 hours.