8/11/2019 Cummins Faults

http://slidepdf.com/reader/full/cummins-faults 1/6

23.11.2006RTG-Training, AT V.1.1

Cummins Faults E-One

Previous

8/11/2019 Cummins Faults

http://slidepdf.com/reader/full/cummins-faults 2/6

Power unit Fault

Pressing the arrow push button up changes the display screen. You can finda page that shows the Alarm list, this is where the faults are displayed.Number on top right indicates the amount of different faults active.

Cummins fault

Alarm List 1Cummins fault

8/11/2019 Cummins Faults

http://slidepdf.com/reader/full/cummins-faults 3/6

ECM & Control switches

If there is a Cummins Fault- on the monitoringdisplay, the code can be monitored from theCummins ECM-unit

Turn the DIAGNOSTIC MODE-switch

The flashing led lights will indicate the fault code

There is also a FAULT RESET-switch for the ECM

ECM = Electronic C ontrol Module, the unit that controls the Cumminsengine

8/11/2019 Cummins Faults

http://slidepdf.com/reader/full/cummins-faults 4/6

Diagnostic LED lights

Diagnostic LEDsOverspeedLow Oil PressureHigh Engine TempShutdownWarning

8/11/2019 Cummins Faults

http://slidepdf.com/reader/full/cummins-faults 5/6

Fault flash out

Common Warning LED

Common Shutdown LED

Common Warning Led(indicate the start o f new fault code)

Common Shutdown LED

8/11/2019 Cummins Faults

http://slidepdf.com/reader/full/cummins-faults 6/6

Cummins Help file

With the Fault code, extra information fortrouble shooting can be found in the

CUMMINS HELP -file, located on thetraining CD

With a known fault code, go to

FAULT CODE DIAGNOSTICS

If no faults, SYMPTON BASEDDIAGNOSTICS can be used

Cummins engine wiring diagrams can also befound in this file