+CURRICULUM VITAE

Dr. KAMBAGOWNI VENKATASUBBAIAH

Dean (R&D), Andhra University&

Professor of Mechanical Engineering ANDHRA UNIVERSITYVisakhapatnam 530003

Tel.: +91 (891) 2844813, +91 9848063452Email: drkvsau@yahoo.co.in

Date of Birth: JUNE 1, 1963

EDUCATIONAL QUALIFICATIONSSSC State Board of Secondary Education, A.P 1978Intermediate

Board of Intermediate Education, A.P 1980B.E. Mechanical Engineering Andhra University 1984M.E. Industrial Engineering Andhra University 1992Ph.D. Mechanical Engineering Andhra University 2001

Teaching Experience

Position From ToAssistant Professor July 11, 1986 June 7, 2001Associate Professor June 8, 2001 September 18, 2006Professor September 19, 2006 December 14, 2018Senior Professor December 15, 2018 Till date

AWARDS2017 Best Paper, Marine Engineering Division, The Institution of Engineers (India),

Kolkata2014 Bharat Ratna Sir M. Visvesvaraya Award from Government of Andhra Pradesh

and The Institution of Engineers (India), Andhra Pradesh State Centre2014 State Best Teacher Award from Government of Andhra Pradesh2014 Best Researcher Award from Andhra University2013 Engineer of the year Award from Government of Andhra Pradesh and The

Institution of Engineers (India), Andhra Pradesh State Centre2013 Technology Excellence Award in the field of Engineering Education2008 DR. Sarvepalli Radhakrishna Award for Best Academician of the year from

Andhra University1995 National Award for Best Article in Non-traditional Area published in Industrial

Engineering Journal of Indian Institution of Industrial Engineering, Bombay1992 National Award for Best Case Study published in Industrial Engineering

Journal of Indian Institution of Industrial Engineering, Bombay

ABROAD VISIT 10th Annual International Conference on Industrial Engineering Theory,

Applications & Practice, Clearwater, Florida, USA, 2005. International Conference on Manufacturing Engineering and Engineering

Management Part of the World Congress on Engineering, London, UK, 2008. International Conference on Research & Innovations in the field of Engineering and

Technology, at Kuala-Lumpur (Malaysia), 2015 International Engineers Alliance Meet, Istanbul, Turkey, 2015 International Conference on “Sustainable Infrastructure Construction for

Developing Countries”, Srilanka, 2015

Consulting Editor:

Journal of Mechanical Engineering, The Institution of Engineers (India), Kolkata, 2006-2008

Chief Editor: Journal of Manufacturing Technology and Management, Indian Institution of Production Engineers, Bangalore, 2014 till Date

Member, Editorial Advisory Board: Journal of The Institution of Engineers (India), Series C, Springer Publications, 2014 till Date

Member:Bureau of Indian Standards committee of ‘Domestic and Commercial Gas Burning Appliances (Pressure Type), 2013

ADMINISTRATIVE & ACADEMIC POSITIONS Dean Research & Development, Andhra University, Oct' 2016 to till

dateHon. Director Andhra University Development Centre, Oct’ 2008 –

Nov’2012Dean Transport, Andhra University, Visakhapatnam, Mar' 2005 –

July' 2008Member Academic Senate, Adikavi Nannaya University, Rajahmundry,

2018 to till dateChairman Board of Studies, Andhra University, Feb' 2014 to Feb' 2017Member Admission and Fee Regulatory Committee (ARFC),

Government of Andhra Pradesh, Jan' 2018 to till dateCore Committee Member

APSET-2016 & 2017, Andhra Pradesh

Committee member ECET – 2011, Andhra PradeshCommittee member EAMCET – 2017 Admission Committee, Andhra PradeshCommittee member PGECET – 2017 Admission Committee, Andhra PradeshRegional Coordinator EAMCET 2009, 2010, 2012, 2013, 2014 & 2015 Andhra

PradeshRegional Coordinator PGECET 2016, Andhra PradeshRegional Coordinator Andhra Pradesh State Level Police Recruitment Board, 2016

& 2017 Regional Coordinator Entrance Test for NTR Vidyonnati Scheme, 2016Member College Research Committee, A U College of Engg. (A),

Andhra University, Feb' 2014 to Feb' 2017Member Board of Studies, Mechanical Engg., Andhra University, 2006

to till dateMember Departmental Research Committee, Mechanical Engg.,

Andhra University, 2001 – 2009, 2012 to till dateMember Departmental Committee, Mechanical Engg., Andhra

University, 2000 – 2009, 2014 to till dateMember Board of Studies, Mechanical Engg. College of Engineering,

JNTUH,Hyderabad, 2009 – 2012

4

Member PG Board of Studies, Mechanical Engg., JNTUAnantapur, 2009 – 2012

Member Board of Studies, Mechanical Engg., College of Engineering (Autonomous), JNTU Kakinada, 2014 to till date

Member Board of Studies, Mechanical Engg, Sri Vidyanikethan Engineering College, Tirupati, 2012 – 2016

Member Board of Studies, Mechanical Engg, RGM Engineering College, Nandyal, 2013 – 2015

Member Board of Studies, Mechanical Engg, SRKR Engineering College, Bhimavaram, 2016 to till date

Member Governing Body - State Government Nominee for Bapatla Engineering College, Bapatla from Jan 2018 to till date

Member Governing Body - State Government Nominee for Chadalawada Ramanamma Engineering College, Tirupati from May 2017 to till date

In-Charge Mechanical Engineering Workshops, Mechanical Engineering Laboratories, Industrial Engineering Laboratory, Andhra University

POSITIONS IN PROFESSIONAL BODIES

Chairman Committee for Advancement of Technology and Engineering (CATE), The Institution of Engineers (India), Kolkata, Jan’ 2014 to Dec’ 2015 & Jan' 2017 to till date

Chairman Board of Examination (BOE), The Institution of Engineers (India), Kolkata, Jan' 2017 to till date

Chairman All India Technicians Committee (AITC), The Institution of Engineers (India), Kolkata, Jan' 2013 - Dec' 2013

Chairman The Institution of Engineers (India), Andhra Pradesh State Centre,2015 – 2016

Council Member The Institution of Engineers (India), Kolkata, Dec' 2005 – Dec' 2007, Dec' 2011 to till date

Council Member Indian Society for Technical Engineering, New Delhi, Jan' 2015 to till date

Executive Council Member

Andhra Pradesh Academy of Sciences, Amaravathi,2018 to till date

Member National Board of Governors, The Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), New Delhi, April' 2017 to till date

Chairman The Institution of Engineers (India), Visakhapatnam Local Centre, Nov' 2005 – Oct' 2007

President The Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), Visakhapatnam Chapter, 2017-2018

President Elect. The Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), Visakhapatnam Chapter, 2016-2017

Hon. Secretary The Institution of Engineers (India), Visakhapatnam Local

5

Centre, Feb' 2004 – Oct' 2005

Secretary The Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), Visakhapatnam Chapter, 2015-2016

MEMBERSHIPS IN PROFESSIONAL BODIESLife Member International Association of Engineers, Hong KongLife FellowLife Fellow

Andhra Pradesh Academy of Sciences, GunturThe Institution of Engineers (India), Kolkata

Life Fellow Indian Institution of Production Engineers, BengaluruLife Fellow Institution of Valuers, New DelhiLife Member Indian Society for Technical Education, New DelhiLife Member Indian Society for Mechanical Engineering, New DelhiLife Member Operations Research Society of India, KolkataLife Member Condition monitoring Society of India, VisakhapatnamLife Member Indian Society for Probability and Statistics, TirupathiLife Member Quality Circle Forum of India, HyderabadLife Member Indian Society of Heating, Refrigerating & Air-Conditioning

Engineers, New DelhiCharted Engineer The Institution of Engineers (India), Kolkata

PATENT APPLIED: D. Krishna Mohan Raju and K. Venkata Subbaiah, “Low Cost Automatic Two Axis Tracking System for Big Solar Dish Collectors”, Ref. No: E-2/2000/2015-CHE, 2015

COPY RIGHTS:

“Integration of Lean and Six Sigma with 5 I Approach in Service Sectors”- No. 8256/2011- CO/L, Dt. 04/04/2013

PROJECTS

Coordinator - Center for Advance Studies (CAS) sanctioned by UGC - Rs. 129.60 lakhs (on Going 2016-2021)

Principal Investigator - “Vibration Damping Studies on Nano Particles filled Polymers and FRP Composites” sanctioned by Naval Science & Technology Laboratory (NSTL), Visakhapatnam, 2011- Rs. 8.65 lakhs

CONSULTANCY

Visakhapatnam Port Modernization, 1996 Conduct of Written Examination for Junior Accounts Officers (JAOs) of APEPDCL,

Visakhapatnam, 2011

6

Carried out an Operational Research study in Visakhapatnam Port Trust for developing the mechanized loading and unloading facilities at EQ 7 berth, 2011

Conduct of Survey of Employment Satisfaction-2012 at RINL, Visakhapatnam, 2012

Motivational Employee Satisfaction Survey-2014 at RINL, Visakhapatnam, 2014 Competency Assessment for Senior Executives at RINL, Visakhapatnam, 2014

Ph.D. GUIDANCE1. Some Meta-Heuristics for Single and Multi-Objective Constrained Optimization

Problems – K.V.V. Chandra Mouli, 2007.2. Design of Supply Chain through Modeling and Selection in Fuzzy Environment –

K. Narayana Rao, 2008.3. Optimization Studies on Some Multi-Item Inventory Problems – V. Durga Prasada

Rao, 2009.4. Supply Chain Design in Crisp and Fuzzy Environment – G.V. Pratap Singh, 2010.5. Some Economic Production Models with Weibull Decay and Different Demand

Patterns - S.V.Uma Maheswara Rao, 2011.6. Some Economic Statistical Designs of Control Chart with Pareto and

Generalized Pareto in-control times – Neelufur, 2011.

7. Experimental Selection of Optimal Carbon Nano Tube Inclusion Levels in Cutting Fluids - S.Narayana Rao, 2011.

8. Integrating Product Design and Supply Chain Design through Quality Function Deployment - K.G.Durga Prasad, 2011.

9. Some strategic decision making approaches for optimal land allocation in agriculture planning - Annepu Gopi, 2012.

10. Some EOQ models under permissible delay in payments and inflation with time dependent deterioration – G.Rambabu, 2012.

11. Some experimental studies on management of municipal solid waste (A case study of municipal corporation of Eluru) – Jasti Sudheer kumar, 2013.

12. Studies on Montmorillonite clay filled Epoxy/Unsaturated polyester blended nanocomposite – K.V.P. Chakradhar, 2013.

13. Influence of hard surface coatings of cutting tools and process parameters on performance measures in turning AISI 304 Austenitic stainless steel – M.Kaladhar, 2014.

14. Synthesis and characterization of surface modified natural fibers reinforced blend composites – G.Venkatesh Prasanna, 2014

15. Working of Rajiv Aarogyasri Community Health Insurance Scheme in Andhra Pradesh (A Cross-Sectional Study)- Srikant Nagulapalli, 2015

16. Design and Deployment of 5 I Methodology for Process Improvement in Service Industries- K. Mallikarjun, 2015

17. Evaluation of Engineering Education Institutions Towards overall Service Quality- An Integrated Model- N. Chandra Shekhar, 2015

18. Enhancement of Production and Quality of Hot Metal through Lean and Six Sigma in an Integrated Steel Plant- O. Rama Mohana Rao, 2015

19. Identification of Supply Chain Strategies and Suppliers Selection for Manufacturing Industries – P. Jamaleswara Kumar, 2016

7

20. Studies on the Effect of Material Hardness and Cutting Insert During the Hard Turning Of AISI 4340 Steel - Chitla Raju, 2018

21. A Paradigm for Sustainable Supply Chain Management in Small and Medium Enterprises Through Fuzzy Analysis – Varanasi Narasimham, 2019

22. Influence of WEDM Process Parameters and Cryogenic Treatment During Taper Cutting of HSS M35 – Challa Suresh, 2019

23. Processing and Characterization of Graphene Nanoplatelets Reinforced Aluminium Metal Matrix Composites, Palampalle Bhanu Prakash, 2019

24. Investigation on the Fatigue Characteristics and Analysis of the Geometrical Parameters of Ti-6Al-4V Cruciform Shape Welded Joint- Srinivasa Reddy Vempati, 2019 (Submitted)

25. High Temperature Corrosion Studies on GTA Welded Dissimilar Metals of Inconel 718 and ASS 316 - Balaji Kandelli, 2019 (submitted)

M.E/M.TECH GUIDANCE1. Perception of organizational culture and job involvement: A comparative study

of public and private sector organizations – M.S.V.L.N. Reddy, 1995.2. Application of fuzzy goal programming to transportation problem – K Rama Rao,

1996.3. Inventory models in fuzzy environment – M. Srinivasulu, 1997. 4. Project planning and control with fuzzy project network analysis – E. Srinivasa

Reddy, 1997.5. Inventory models with changing transportation cost structure – P. Bhanu Murthy,

1998.6. A comparative study of goal programming and fuzzy goal programming for

decision making – N. Prabhakar, 1998.7. Stochastic programming in a fuzzy environment – K. Narayana Rao, 1998.8. Goal programming and fuzzy goal programming approaches to a transportation

problem R. Bhaskara Rao, 19999. Inventory models with stock dependent demand in crisp and fuzzy environment

– M.Lokeswara Rao, 1999.10. Optimal land allocation in agricultural planning through goal programming and

fuzzy goal programming – A case study of Visakhapatnam district – A. Gopi, 1999.

11. EOQ models for deteriorating items with order dependent demand – M. Manoj Kumar, 2000.

12. Design and evaluation of quality policies using fuzzy outranking technique – A case study – K. Lakshmana Rao, 2000.

13. Production inventory models for damageable items with stock dependent demand – T. Suseela, 2000

14. Multi criteria decision making to a product – mix problem – A case study of Visakhapatnam Steel Plant – P. Suresh, 2001

15. Production inventory models with inventory level dependent demand and exponential decay – G. Hemalatha, 2001.

16. Allocation of police patrol men in Visakhapatnam city – A case study – M.Ch. Jagadeswaradu, 2001.

17. Production inventory model for deteriorating items with exponential demand – N. Kalyani, 2002.

8

18. Implementation of Kaizen and 5’s principle in front spring assembly line – C. Venkateswara Rao, 2002.

19. Operations support system for cold storage transportation – B. Madhava Kumar, 2002.

20. Determination of base stock in a supply chain using simulation and tabu search - A case study at Visakhapatnam Steel Plant – A. Satyanarayana, 2002.

21. Inventory management in JIT age – A case study – K. Kumar, 2002.22. Optimization of feeder shop to assembly shop transportation costs in a heavy

fabrication industry – Neelufur, 2002.23. Inventory models with stock dependent demand and fuzzy deterioration rate –

B. Venkataswami Naidu, 2002.24. Solid transportation problem with budgetary constraint – K. Prabhakara Murthy,

2002.25. Management information system for effective materials management in

Visakhapatnam Steel Plant – B. Jagadish, 2002.26. Evaluation of agricultural development policies using fuzzy outranking technique

– A case study – A.V. Vijayasimha, 2003.27. Genetic algorithm approach to machine loading problem in flexible

manufacturing systems – Tata Hari Krishna, 2003.28. Simulated annealing algorithm for U-shaped line balancing problem – G.

Venugopal, 2003.29. Application of QFD for Improving Engineering Education - A Case Study –

K.G.Durga Prasad, 2003 30. Design of supply chain to a stochastic continuous review inventory model – H.

Murthy, 2003.31. Enhancing steel quality in Visakhapatnam Steel Plant – A six sigma approach

– K.Siva Kumar, 2003.32. Selection of projects using Analytical hierarchy process - M.Ramesh babu, 2003.33. Development of an Algorithm for Scheduling Flexible manufacturing system – L.

Deva, 2003.34. Producti-Mix Analysis in A Dairy Industry A Case Study of Visakha Dairy- N.

Sujata, 200335. ANT Colony Optimization for Traditional and U-Shaped Line Balancing

Problems- V. Sangeetha, 200436. Classification of comparing through neural network approach – Ch.Raju, 2004.37. Vender selection problem through a mixed-integer linear programming

approach - D.V.S.N Malleswara Rao, 2004.38. Simulated Annealing Algorithm for mixed model U-shaped line balancing

problem T.S.Suryakumari, 2004.39. Simulated Annealing Algorithm for machine loading problem in FMS - M.

Anuradha, 2004.40. An Economic design of control charts for weibull characters – M.Pardhasaradhi,

2004.41. An analysis of scheduling rules in a job shop production system – N. Arun Babu,

2004.42. Hybrid Simulated Annealing and Tabu Search algorithm for the vehicle routing

problem K.Lakshmi Suneetha, 2005.43. An Integrated System of MRP-II Kanban and Cost accounting – B.Anil Prasad,

2005.

9

44. Reduction of Turnaround time for sub-contractors’ vehicles using Kaizen – P.Satish Babu, 2005.

45. Fuzzy approach for solving Machine loading problem – Ch. Bhramaramba, 2005.46. Order allocation in Supply chain management – P. Kishore Kumar, 2005.47. Statistical analysis for simulation results of S-s inventory policy – B. Sumalatha,

2006.48. Selection of projects through MCDM methods (ELECTRE and TOPSIS) – A Case

study –K.Madhu Kumar, 2006.49. A study to Improve Maintance of Marine Diesel Engines Using Failure Mode and

Effect Analysis - CDR PS Malhotra, 200650. Application of Six Sigma to improve liquid steel quality – M.Jyothi, 2006.51. Development of a heuristic algorithm for scheduling on parallel machines – N.

Venkateswara Rao, 2006.52. Inventory models for deteriorating items having two component mixtures –

M.Hepziba, 2007.53. Optimization of Bi-criteria scheduling on parallel machines using Genetic

Algorithm – P. S. Prema Kumar, 2007. 54. A case study on 5S implementation in Hindustan Shipyard Limited – K.Manohar,

2008.55. Scheduling of AGVs and Machines in FMS with make span criteria using Sheep

Flock Heridity Algorithm – M. Nageswara Rao, 2008.56. Supplier selection in supply chain management through fuzzy multiple criteria

decision support system – K. Sukumar, 2008.57. Work measurement in body shop through Maynard Operation Sequence

Technique (MOST) – T.Sekhar Babu, 2009.58. Scheduling of Machines and AGVs in FMS with Multi objective criteria using

Heuristic Algorithm - B.Vidya Sagar, 2009.59. Multi objective oriented approaches for supplier selection – V.S. Satyanarayana

Raju, 2010. 60. Some interdependent heterogeneous Queueing models – Y.Bhim Shankar, 2010.61. A compensatory fuzzy approach to vendor selection – B.Tulasi Rao, 201062. Allocation of patrolmen in urban areas - A case study – S.Appala Naidu, 201063. Multi echelon supply chain network design in fuzzy environment – J.Rajesh, 201064. Development of multiple lots scheduling algorithm for optimization of makespan

time – S.Vikram, 2011.65. Supplier Evaluation through Data Envelopment Analysis – Ch.Venu Gopala Rao,

2011.66. Genetic algorithm approach to product-mix in a diary industry - B. Muralidhar

reddy, 2011.67. Vendor rating system – A key parameter to materials management – J.

Puspalatha, 2011.68. Fuzzy weighted additive approach to vendor selection under multi product

environment – B. Rama Sudheera, 2011.69. Process improvement to reduce frequently rework for non-conformity of

injection wheel assembly of Artouste IIIB engine – G. Ram Prasad, 2012.70. Modeling and Optimization of process parameters for milling of Hardened Steel –

V.V.K.Lakshmi, 2012.

10

71. Study and optimization of injection molding parameters and its effect on mechanical properties of high impact polystyrene – G.Srinivasa Santosh Pavan, 2012

72. Green Quality function deployment – Analytic hierarchy process methodology for product concept evaluation – V Mallikarjuna Kishan I, 2012

73. Investigating green supply chain management approaches using Analytic Network Process – K. Arun, 2012

74. Product mix analysis in a Pharma Industry- A Case Study - Y. Hima bindu, 2013 75. Prioritization of Engineering Characteristics of a Product Using HOQ-ANP

Approach - Challa Suresh, 2013 76. Supplier Selection through QFD Approach: a case Study – N.Sameera, 201377. Optimization of Wire-EDM Process Parameters Using Gray-Taguchi Technique

For Cutting HCHCr Material- P. Navaratna Kumar, 201478. Supplier Evaluation And Selection Through DEA-AHP-GRA Integrated Approach –

A Case Study- M.V. Prasad, 201479. Optimization of Process Parameters On Milling Of Glass-Fibre-Reinforced

Plastics- M.Muthukumaran, 201480. Optimization of Machining Process Parameters in Dry-Turning of EN19 Steel -

Ch.Maheswara Rao, 201581. Analysis and Ranking of Defects in Wire Rod Mill Through Six Sigma and Analytic

Hierarchy Process- Kasi Dhiraj Dhavala, 201582. Optimizing the Linear and Angular Distortions of Hatch Cover Girders in Cargo

Ships - Matham Ramesh Naidu, 2015 83. A Break-Even Analysis for Inventory Sensitive to Shrinkage Using RFID

Technology- Budupula Kishore, 201584. Performance Evaluation of Banks- A Case Study- M. Bharani, 201585. Hybrid Model of Lean Assessment and its Implementation in Manufacturing

Organization- A Case Study- Rajeswari Velaga, 201586. Facility Layout Planning using Computerized Algorithms – Jagadish K E, 201587. Optimal Land Allocation for Major Crops using Teaching Learning Based

Optimization – G. V. Arun Chaitanya, 201588. Optimization of Cutting Parameters in CNC Milling using Gray Relational Analysis

– G.Revanth, 201589. Optimization of Cutting Parameters in CNC Turning of EN8 Material – M.

Sameera Sarma, 201590. Analysis of key Factors Affecting the Variation of Labour Productivity in

Visakhapatnam Steel Plant- G.Samkeerth, 201591. QFD-ANP Approach for Conceptual Design of Research Vessels – A Case Study -

Yeshwanth Sai Koneru, 201592. Teaching Learning Based Optimization Approach for Product-Mix in A Dairy

Industry – Rayeneni Mounica, 201593. Optimization of Police Patrol Manpower Allocation Using Goal Programming

Approach – A Case Study – G. Daniel Vivek, 201594. Synthesis of Aluminium Nanocomposite and Optimazing the Wear

Characteristics - Beera Avinash Ben, 201595. Production Improvement in a Manufacturing Industry using Value Stream

Mapping Technique – A Case Study - P Meenakshi, 201596. Development Of A Student Database Management System In A University – D.

Dinesh, 2016

11

97. Prioritization Of Railway Passengers Service Quality Attribute Using QFD – ANP Methodology – P.V.Sai Gowtham, 2016.

98. Lean Assessment And Its Implementation In Manufacturing Organization – A Case Study – R.Venkateswara Rao, 2016

99. Effect of Variability on the Performance of a Production Line- K. Aravind Sankeerth, 2016

100. An Average And Marginal Cost Pricing Model For Rice Production And Distribution Utilities – V. Rami Reddy Padala, 2016

101. Influence of Turning Parameters on Surface Roughness and Flank Wear in Machining of SS304 Steel using Cryogenically Treated HSS Tool, S. V. Satya Prasad, 2016

102. Performance Evaluation and Modeling of Container Terminals, Malleswara Rao Mattam, 2016

103. Optimization of Process Parameters in CNC Drilling for EN 36 Material, Fiaz Khan, 2016

104. Design  and Optimization of Band Pass Filter in Telephones Using Taguchi Technique- M. Prem Sai, 2016

105. Solving A Capacitated Vehicle Routing Problem using Meta Heuristic Algorithm - Shaik Rehana, 2016

106. Quota Allocation to Distributors using Bullwhip Effect and Fuzzy Goal Programming, Ch. Suresh, 2017

107. Multi Objective Optimization of sliding wear of Al6061/Bagassae Ash by Using PROMETHEEII - M. Venkata Raju, 2017

108. Optimisation of Welding Process Parameters of Titanium Pipe for High Presssure Air System in Submarine - Lijo Joseph, 2018

109. HOQ-ANP Methodology for Prioritization of Engineering Characteristics of An Air Conditioner, Palepu Vani, 2018

110. Optimization of Milling Process Parameters Using MOORA and MOOSRA Methodology, R. Rambabu, 2018

111. Multi Objective Optimization of Machining Parameters for Turning Using Genetic Algorithm, P.V.J.S.Chandramouli, 2018

112. Optimization of Wire EDM Process Parameters on EN-8 Steel Using TOPSIS Method, Yalla Harikumar, 2019

113. Optimization of Process Parameters In Wire-EDM of A-2 Tool Steel Using RSMand Desirability Function, Y. Venkata Suresh, 2019

114. Parametric optimization of Multiple responses in Wire Electric Discharge Machining of Inconel 825using Taguchi based utility approach, CH. Neelima, 2019

115. Optimization of Process parameters in Wire EDM of Maraging steel using ANN and GA, Epari Dinesh, 2019

116. Fuel conservation in shunting locomotives through optimization of operating parameters with Factorial design of experiments, M. Siva Rama Krishna, 2019

117. Parametric optimization in Wire EDM of NIMONIC 90 using micro genetic algorithm, B. Simhadri Dora, 2019

BOOKS and BOOK CHAPTERS Editor/Editor in Chief:

12

1. Operation Research, Editor, published by School of Distance Education, Andhra University, Visakhapatnam. 2008

2. Competitiveness of Indian Steel Sector vis-à-vis Augmentation of Logistics Infrastructure and Solid Waste Management, MM, The Institution of Engineers (India), Kolkata, Vol. 1, 2014

3. Customer Centric Design and Manufacture of Mechanical Equipment, The Institution of Engineers (India), Kolkata, Vol. 1, 2015

4. Make in India to Made in India, The Institution of Engineers (India), Kolkata, Vol. 2, 2017

5. Emerging Technologies for Power Generating Systems, The Institution of Engineers (India), Kolkata, Vol. 2, 2017

6. Rise in New Generation Textiles, The Institution of Engineers (India), Kolkata, Vol. 2, 2017

7. e-Health, The Institution of Engineers (India), Kolkata, Vol. 2, 20178. Challenges & Opportunities in Meeting the Environmental Norms, The

Institution of Engineers (India), Kolkata, Vol. 2, 20179. Excellence in Manufacturing, The Institution of Engineers (India), Kolkata, Vol.

2, 2017

Author/Co-Author1. Engineering Economics, Co-Author, published by School of Distance Education,

Andhra University, Visakhapatnam. 20072. Production Management, Co-Author, published by School of Distance Education,

Andhra University, Visakhapatnam. 20083. Electronic Supply Network Coordination in Intelligent and Dynamic

Environments: Modeling and Implementation, Book Chapter, IGI Global DOI:10.4018/978-1-61350-456-7.ch609, 2011

4. Machining: Operations, Technology and Management, Co-Author, published by Nova Publishers, 2013

5. Supply Chain Management in a diary industry – A Case study, Book Chapter, Proceedings of World Congress on Engineering, Vol.1.595-599 (ISBN: 978-988-17012-5-1).

6. Sustainable Solid Waste Management, Co- Author, Published by Apple Academics, Inc., USA, 2012

7. Facilities layout optimization using Genetic Algorithm, Book Chapter, Proceedings of ICACT, 32-36, B.S.publications. (ISBN: 978-81-7800-188-3)

8. Modeling & Simulation of Planning decisions in FMS using Artificial Intelligence, Book Chapter, Proceedings of ICMOT, 365-379, B.S. Publications. (ISBN: 978-81-8465-701-2).

CONFERENCES / SEMINARS ORGANISED

1. National Seminar on ‘Safety & Quality – Impact on Productivity’, The Institution of Engineers (India), Visakhapatnam Local Centre, 2004.

2. National Seminar on ‘World Trade Organization and Engineering Profession’, The Institution of Engineers (India), Visakhapatnam Local Centre, 2005.

3. National Seminar on ‘Role of Engineers in Natural Disaster Mitigation and Management’, The Institution of Engineers (India), Visakhapatnam Local Centre, 2006.

13

4. National Seminar on ‘Convergence of Technologies for Rapid Development’, The Institution of Engineers (India), Visakhapatnam Local Centre, 2007.

5. 20th National Convention of Marine Engineers on ‘Dredging and integrated Development of Inland Waterways’ The Institution of Engineers (India), 2007.

6. ‘International Workshop on ‘Data mining and Stochastic modeling’, Visakhapatnam, 2008

7. International Conference on Statistics, Probability, Operations Research, Computer Science and Allied Areas, Visakhapatnam, India, 04-08 January, 2010.

8. MESCON’10, National level Mechanical Engineering student’s conference, Andhra University, Visakhapatnam, India, 24-25, September, 2010.

9. 27th National convention of Chemical Engineers on “Bio-fuels towards energy security and environment protection”, Visakhapatnam, India, September 30-October 1, 2011.

10. 27th National convention of Marine Engineers on “Opportunities / Challenges in Design / Construction of Vessels for Navy, Coast Guard and Offshore - Oil & Gas Industry”, Visakhapatnam, India, August 16-17, 2013.

11. Twenty –Second IEI Convocation and Technicians’/Students’ Convention”, The Institution of Engineers (India), Visakhapatnam, 15th - 16th November, 2014.

12. One day Workshop on “Entrepreneurship and Innovation”, Visakhapatnam, 13, July, 2016

13. One day National Workshop on “Materials & Manufacturing”, Visakhapatnam, 23rd March, 2017

14. National Conference on “Recent Trends in Manufacturing”, Department of Mechanical Engineering, Andhra University, Visakhapatnam on 29th March, 2018.

15.

PUBLICATIONS IN INTERNATIONAL JOURNALS

1. K. Venkata Subbaiah, A. Gopi and K. Narayana Rao (2003): ‘Optimal land allocation in agricultural planning through fuzzy goal programming’, International Journal of Management and Systems, Vol.19, No.3, 297-315.(ISSN: 0970-7328)

2. U.Adinarayana and K.Venkata Subbaiah, (2006): ‘Inventory model for items having stock dependent demand and fuzzy deterioration rate’, International Journal of physical sciences, Vol.18, No.2, 207-214. (ISSN: 0970-9150)

3. K. Narayana Rao, K. Venkata Subbaiah and V. Ramachandra Raju, (2008): ‘Selection of Supply Chain through Fuzzy Analytical Hierarchy Process (FAHP)’ International Journal of Mathematical Science, Vol.7, No.3-4, 393-404. (ISSN: 0972-754X)

4. V. Durga Prasada Rao, K. Venkata Subbaiah, V. Ramachandra Raju (2009): ‘Fuzzy Genetic Approach to Economic Lot-Size Scheduling Problem’, Jordan Journal of Mechanical and Industrial Engineering, Vol.3, No. 1, 9-16. (ISSN: 1995-6665)

5. K. Venkata Subbaiah and B.Vidya Sagar (2009): ‘Scheduling of Machines and AGV are in FMS with Mean Flow Time criteria using Scatter Search and Sheep Flock Heredity Algorithms’, Manufacturing Technology & Research: An International Journal, Vol.5, No. 1 & 2, 56 - 65. (ISSN: 0973-0281)

14

6. K.V.Subbaiah, M.Nageswara Rao and K.Narayana Rao (2009): ‘Scheduling of AGVs and machines in FMS with makespan criteria using sheep flock heredity algorithm’, International Journal of Physical Sciences, Vol.4 (2), 139-148. (ISSN: 1992-1950)

7. K. Venkata Subbaiah, K. Narayana Rao and K. Nookesh babu (2009): ‘Supply Chain Management in a diary industry – A Case study’ Proceedings of World Congress on Engineering, Vol.1.595-599 (ISBN: 978-988-17012-5-1).

8. V.S.Satyanarayana Raju, K. Venkata Subbaiah, K. Narayana Rao, (2009): ‘Supplier Selection through Fuzzy Goal Programming’ CiiT International Journal of Artificial Intelligent Systems and Machine Learning, Vol. 1, No.7, 235-242.(ISSN: 0974-9667)

9. Neelufur, K. Srinivasa Rao and K. Venkata Subbaiah (2010): ‘Studies on control chart with Pareto in-control times for Non normal variates’, Jordan Journal of Mechanical and Industrial Engineering. Vol. 4, No. 3, 364-371. (ISSN: 1995-6665)

10. K. Venkata Subbaiah, K. Narayana Rao and V. Ramachandra Raju, (2010): ‘Selection of Supply Chain through Fuzzy Outranking Technique’ Journal of Information, Intelligence and Knowledge, Vol.2, Issue 2, 109-118. (ISSN: 1937-7983)

11. K. Srinivasa Rao , Neelufur and K. Venkata Subbaiah (2010): ‘Optimal Operating policies of control chart for Non normal variables with Generalised Pareto in-control times ’ International Journal of Productivity and Quality Management, Vol. 6, No.1, 91-111. (ISSN: 1746-6474) X¯

12. J.Sudhir kumar, K. Venkata Subbaiah and P.V.V. Prasada Rao (2010): ‘Statistical and regression analysis of Muncipal solid waste – A case study’, International Journal of Applied Engineering Research, Vol.5, No.2, 285-292. (ISSN: 0973-4562)

13. V. Durga Prasada Rao, K. Venkata Subbaiah, V. Ramachandra Raju and K. Narayana Rao (2010): ‘Optimization of Constrained Multi-item Fuzzy Inventory Problems using Genetic Algorithm’, International Journal of Mechanical Engineering, Vol.3, Issue 1, 29-35. (ISSN: 0974-5823)

14. Neelufur, K.Srinivasa Rao and K. Venkata Subbaiah (2010): ‘Optimal design of control chart with Pareto in-control times’, International Journal of Advanced Manufacturing Technology, 48, 829-837. (ISSN: 0268-3768)

15. K.G. Durga Prasad, K. Venkata Subbaiah, K. Narayana Rao and C.V.R.S.Sastry (2010): ‘Prioritization of Customer needs in house of quality using conjoint analysis’, International Journal for Quality Research, Vol.4, No.2, 145-154. (ISSN: 1800-6450)

16. J.Sudhir kumar, K. Venkata Subbaiah and P.V.V. Prasada Rao (2010): ‘Waste to energy: A case study of Eluru, A.P, India’, International Journal of Environmental Science and development, Vol.1, No.3, 238-243.(ISSN: 2010-0264)

17. T.R.Boddepalli, K. Venkata Subbaiah and K. Narayana Rao (2010): ‘A compensatory fuzzy approach for vendor selection’, Global Journal of Researches in Engineering, Vol.10, No.6, 20-25. (ISSN: 0975-5861)

18. M.Kaladhar,K.Venkata Subbaiah, Ch. Srinivasarao andK.Narayana Rao (2010): Optimization of Process Parameters in turning of AISI 202 Austenitic Stainless Steel, ARPN Journal of Engineering and applied sciences, Vol.5, No.9, 79-87. (ISSN: 1819-6608)

15

19. J.Sudhir kumar, K. Venkata Subbaiah and P.V.V. Prasada Rao (2010): ‘Management of Muncipal solid waste by Vermi Compost - A case study of Eluru’, International Journal of Environmental Sciences, Vol.1, No.1, 82-90.

20. K. Venkata Subbaiah, U.V.Adinarayana Rao and K. Narayana Rao (2010): ‘Order Allocation in Supply Chain Management’, International journal of Management Sciences, Vol.6, No.1, 167-177. (ISSN: 0973-2101)

21. K.Durga Rani, K. Venkata Subbaiah, C.N.V.Satyanarayana Reddy and S.S.S.V.Gopala Raju (2010): ‘A Simulation study on Overtakings and Lane changing behaviour on an Urban Road Corridor’, International Journal of Engineering Research and Technology, Vol.3, No.3, 691-698. (ISSN: 0974 –3154)

22. S.V.Uma Maheswara Rao , K. Venkata Subbaiah and K. Sreenivasa Rao (2010): ‘Production Inventory models for deteriorating items with Stock dependent demand and Weibull decay’ IST Transactions of Mechanical Systems - Theory and Applications, Vol.1, No.1(2), 13-23.(ISSN: 1913-8261)

23. N.Chandra sekhar, K. Venkata Subbaiah, K. Narayana Rao (2010): ‘Enhancing the Quality of the Engineering Education Institutions (EEIs) through Gap Analysis’, International Journal for Quality Research, Vol.4, No.4, 241-248. (ISSN: 1800-6450)

24. S.V. Uma Maheswara Rao, K. Srinivasa Rao, and K. Venkata Subbaiah (2010): ‘Production Inventory Model for Deteriorating Items with on hand Inventory and Time Dependent Demand’, Jordan Journal of Mechanical and Industrial Engineering, Vol.4, No.6, 739-756.(ISSN: 1995-6665)

25. K. Venkata Subbaiah, S.G. Acharyulu and K.V.V.Chandra Mouli (2011): ‘Fuzzy Goal Programming Method for Solving Multi-Objective Transportation Problems’, Global Journal of Researches in Engineering, Vol.11, No.3, 5-10. (ISSN: 0975-5861)

26. K. Venkata Subbaiah, K.G. Durga Prasad and K. Narayana Rao (2011): ‘Customer-Driven Product Planning using Conjoint Analysis and QFD-ANP Methodology’, International Journal of Productivity and Quality Management, Vol.7, No.3, 374-394. (ISSN: 1746-6474)

27. K.G. Durga Prasad, K. Venkata Subbaiah, and K. Narayana Rao (2011): ‘Cost Engineering with QFD: A Mathematical Model’, International Journal for Quality Research, Vol.5, No.1, 33-37. (ISSN: 1800-6450)

28. Venkata Subbaiah K., Uma Maheswara Rao, S.V. and Srinivasa Rao, K (2011): ‘Inventory model for perishable items with alternating rate of production’, International Journal of Advanced Operations Management, Vol.1, No.1, 66-87. (ISSN: 1758-938X)

29. O.Ram Mohan Rao, K. Venkata Subbaiah, K. Narayana Rao and T.Srinivasa Rao (2011): ‘Enhancing productivity of hot metal in blast furnace – A case study in an integrated steel plant’, International Journal of Engineering Science & Technology, Vol.3, No.4, 3518-3525. (ISSN: 0975-5462)

30. S.Narayana Rao, B.Satyanarayana and K.Venkata Subbaiah(2011): ‘Experimental investigation of microbial contamination of nano cutting fluids with CNT inclusion,’ Global Journal of Researches in Engineering Vol.11, No.4, 23-26.(ISSN: 0975-5861)

31. K. Srinivasa Rao, S.V. Uma Maheswara Rao and K. Venkata Subbaiah (2011): ‘Production Inventory models for deteriorating items with production quantity dependent demana and Weibull decay’ International Journal of Operational Research, Vol.11, No.1, 31-53.(ISSN: 1745-7645)

16

32. G.Venkatesha Prasanna and K. Venkata Subbaiah (2011), ‘Tensile Properties of Banana-Palmyra Fibers Reinforced Epoxy-Unsaturated Polyster Blended Composites’, International Journal of Advanced Materials Science, Vol.1, No.1, 29-34. (ISSN: 2231-1211)

33. M. Kaladhar, K. Venkata Subbaiah, Ch. Srinivasarao and K.Narayana Rao (2011): Application of Taguchi approach and utility concept in solving the Multi-objective problem when turning AISI 202 Austenitic Stainless Steel, Journal of Engineering Science and Technology Review, Vol.4, No.1, 55-61. (ISSN: 1791-2377)

34. Gopi. Annepu, K. Venkata Subbaiah and N.R.Kandukuri (2011): ‘Land allocation strategies through genetic algorithm approach – A case study,’ Global Journal of Researches in Engineering Vol.11, No.4, 6-14. (ISSN: 0975-5861)

35. S.Narayana Rao, B.Satyanarayana and K.Venkata Subbaiah (2011): ‘Experimental estimation of tool wear and cutting temperatures in MQL using cutting fluids with CNT inclusion’, International Journal of Engineering Science & Technology, Vol.3, No.4, 2928-2931. (ISSN: 2278-9510)

36. G.Venkatesha Prasanna and K. Venkata Subbaiah (2011): ‘Chemical Resistance and Compressive Properties of Banana-Palmyra Fibers Reinforced Epoxy- Unsaturated Polyster Blended Composites’, International Journal of Multidisciplinary Research and Advances in Engineering, Vol.3, and No.2, 123-130. (ISSN: 0975-7074)

37. J.Sudhir Kumar, Dr.K.Venkata Subbaiah and Dr. P.V.V.Prasada Rao (2011): ‘Experimental studies on a DI-CI engine using blends of diesel fuel with Plasti diesel derived from Plastic Waste’, International Review of Mechanical Engg., Vol.5, No.3, 540-547. (ISSN: 1970 – 8734)

38. K. Venkata Subbaiah, K.G. Durga Prasad, M.Uma Bharathi and K. Soma Sekhara Rao (2011): ‘Integrating factor analysis and Analytical hierarchy process for library service quality’, International Journal for Quality Research, Vol. 5, No. 3, 205-212. (ISSN: 1800-6450)

39. M. Kaladhar, K. Venkata Subbaiah, Ch. Srinivasarao (2011): Performance evaluation of coating materials and process parameters optimization for surface quality during turning of AISI 304 austenitic stainless steel, International Journal of Engineering, Science and Technology, Vol. 3, No. 4, 89-102. (ISSN: 2278-9510)

40. K.V.P.Chakradhar, K.Venkata Subbaiah, M.Ashok Kumar and N.Subbarami Reddy (2011): Thermal analysis of Epoxy/Polyester Blend filled with Montomorillonite(MMT) clay Nanocomposites, International Journal of Engineering Research and Industrial Applications, Vol.4, No.III, 123-132. (ISSN: 0974-1518)

41. S.Narayana Rao, B.Satyanarayana and K.Venkata Subbaiah (2011): ‘Online tool wear prediction models in minimum quantity lubrication,’ Global Journal of Researches in Engineering, Vol.11, No.5, 13-18. (ISSN: 0975-5861)

42. K. Venkata Subbaiah, K. Narayana Rao and S.Appala Naidu (2011): ‘Allocation of patrolmen in urban areas - A case study’, International Journal of Services Operation and Informatics, Vol.6, No.4, 273-291. (ISSN: 1741-539X)

43. G.Venkatesha Prasanna and K. Venkata Subbaiah (2011): ‘Flexural & Impact Properties of Banana-Palmyra Fibers Reinforced Epoxy-Unsaturated Polyster Blended Composites’, International Journal of Mechanical Engineering, Vol.4, No.1, 35-38. (ISSN: 0976 – 6340)

17

44. K.V.P.Chakradhar, K.Venkata Subbaiah, M.Ashok Kumar and G.Ramachandra Reddy (2011): Epoxy/Polyester Blend Nanocomposites: Effect of Nanoclay on Mechanical, Thermal and Morphology Properties, Malyasian Polymer Journal, Vol.6, No.2, 109-118. (ISSN: 1823-7789)

45. J.Sudhir Kumar, Dr. K.Venkata Subbaiah and Dr. P.V.V.Prasada Rao (2011): ‘Municipal solid waste management scenario in India, Australian Journal of Engineering Research, SCIE Journals.

46. Sudhir Kumar. J, Joshua Prasad V. J, Venkata Subbaiah. K and V.V.Prasada Rao. P (2011): ‘Experimental studies on a DI-CI engine using blends of diesel fuel with Plastic diesel derived from Plastic Waste at 250 bar injection pressure’, International Journal of Current Engineering and Technology, Vol. 1, No.1. (ISSN: 2277 – 4106)

47. K.G. Durga Prasad, K.Venkata Subbaiah and G.Padmavathi (2012): ‘Application of Six Sigma methodology in an Engineering Educational Institution’, International Journal of Emerging Sciences, Vol.2, No.2, 222-237.

48. K.V.P.Chakradhar, K.Venkata Subbaiah, M.Ashok Kumar and G.Ramachandra Reddy (2012): Blended Epoxy/Polyester Polymer Nanocomposites: Effect of Nano on Mechanical, Polymer - Plastics Technology and Engineering, Vol. 51, 92-96.

49. M. Kaladhar, K. Venkata Subbaiah and Ch. Srinivasarao (2012): ‘Machining of Austenitic Stainless Steels- A review’ International Journal of Machining and Machinability of Materials , Vol.12, Nos.1/2, 178-192.

50. V V K Lakshmi, and K. Venkata Subbaiah (2012): ‘Modelling and Optimization of Process Parameters during End Milling of Hardened Steel’ International Journal of Engineering Research and Applications, Vol.2, Issue 2, 674-679. (ISSN: 2248-9662)

51. Mallikarjun Koripadu and K. Venkata Subbaiah (2012): Service sectors growth in India: can integration of Lean Six sigma be a solution?’ Elixir International Journal, Vol.49, 9910-9913.

52. M.Kaladhar, K Venkata Subbaiah , Ch. Srinivasa Rao (2012): Parametric optimization during machining of AISI 304 austenitic stainless steel using CVD coated DuratomicTM cutting insert, International Journal of Industrial Engineering Computations, Vol.3,577–586.

53. K.G. Durga Prasad, K. Venkata Subbaiah and K. Narayana Rao (2012): ‘Aligning the competitive strategy with supply chain strategy through QFD’, Journal of Advances in Management Research, Vol.9, No.2, pp.189-198.

54. M. Kaladhar, K. Venkata Subbaiah and Ch. Srinivasarao (2012): Determination of Optimum Process Parameters during turning of AISI 304 Austenitic Stainless Steels using Taguchi method and ANOVA, International Journal of Lean Thinking,Vol.3(1),1-19.

55. A. Gopi, K. Venkata Subbaiah and K. Narayana Rao, (2012): ‘Genetic Algorithm Approach to a Multiobjective Land Allocation Model - A Case Study’, International Journal of Agricultural and Environmental Information Systems, Vol.3, No. 2, 86-99.

56. Murali Krishna.M, K. Venkata Subbaiah(2012): ‘Supply chain Management: The Educational Organization Perspective’, Asian Journal of Management Research, Vol.3, No. 1, 277-281.

57. N.Chandra Shekhar, K.Venkatasubbaiah and K.Narayana Rao (2012): Establishing the overall service quality of engineering education – fuzzy logic approach’, European Journal of Engineering Education, Vol. 37, No.6, 575-591.

18

58. M.Kaladhar, K Venkata Subbaiah, Ch. Srinivasa Rao, K Narayana Rao (2012):  Process parameters optimization and coatings influence on the surface quality during turning of AISI 202 austenitic stainless steel, International Journal of Machining and Machinability of Materials, Vol. 11, Issue 4, 371-383.

59. Murali Krishna.M, K. Venkata Subbaiah (2012): ‘A Research Frame work on Role of Information in Educational Supply chain’, World Applied Sciences Journal, Vol.17, No. 5, 617-621.

60. D.Venkata Ramana, K.Narayana Rao, J.Suresh Kumar and K.Venkatasubbaiah(2012):‘Identification of Measurement items of design requirements for lean and Agile supplychain-Confirmatory Factor Analysis’, International Journal for Quality Research, Vol. 7, No. 2,255-264. (ISSN: 1800-6450)

61. Sudhir Kumar. J, Ravi. K, Satyanarayana. D, Venkata Subbaiah. K and V.V.Prasada Rao. P (2012): ‘Experimental studies on a SI engine using Plastic petrol derived from Waste Plastic’, International Journal of Thermal Technologies, Vol. 2, No.2. (ISSN: 2277 – 4114)

62. G.Venkatesha Prasanna, K. Venkata Subbaiah and A. Varada Rajulu (2012), ‘Chemical Resistance , Impact, Flexural, Compressive Properties and Optimization of fibers of Natural fiber reinforced blend Composites ’, Scholarly Journal of Engineering Research, Vol.1, No.6, 21-29.

63. V.Narasimham, K.Venkatasubbaiah and P.S.Avadhani, (2013): ‘ Identification of critical SSCM activities through Confirmatory Factor Analysis, International Journal for Quality Research, Vol. 7, No. 2,239-248. (ISSN: 1800-6450)

64. N.Chandra sekhar, K. Venkata Subbaiah and K. Narayana Rao, (2013): ‘Factor Analysis-AHP Approach to enhancing the quality of the Engineering Education Institutions (EEIs): A Case Study’, International Journal of management in Education, Vol. 7, No. 3, 237-253.

65. Murali Krishna .M, K. Venkata Subbaiah, (2013): ‘Supply chain Coordination by Information Sharing: The Educational Organization Perspective’, International Journal of Business and Management Tomorrow, Vol.3, No. 2, 1-7.

66. G.Venkatesha Prasanna and K. Venkata Subbaiah (2013): ‘Modification, Flexural, Impact, Compressive Properties & Chemical resistance of Natural Fibers Reinforced Blend Composites’, Malaysian Polymer Journal, Vol.8, No.1, 38-44.

67. M. Kaladhar, K. Venkata Subbaiah, Ch. Srinivasa Rao (2013): Optimization of surface roughness and tool flank wear in turning of AISI 304 austenitic stainless steel with CVD coated tool, Journal of Engineering Science and Technology, Vol. 8, Issue 2, 165 – 176.

68. K.V.P.Chakradhar, and K.Venkata Subbaiah, (2013): ‘Effect of clay on chemical and mechanical properties of blended nanocomposites’. Elixir Mechanical Engineering, Vol. 57A, 14448-14451

69. Venkatesh Gowda GiriPrasanna and K. Venkata Subbaiah (2013): ‘Modification of Tensile, Compressive Properties & Chemical resistance of Hybrid Biocomposites’, International Journal of Nanomaterials and Biostructures, Vol.3, No.1, 9-12.

70. K.Narayana Rao, K.Venkata Subbaiah and G.V.Pratap Singh (2013): ‘Design of supply chain in fuzzy environment’ Journal of Industrial Engineering International, Vol. 9, No.9,1-11

19

71. P. Jamaleswara Kumar, K.Venkatasubbaiah and K.Narayana Rao (2013): ‘Identification SWOT variables for Supplier Selection – A Case study’ International Journal of Mechanical and Production Engineering Research and Development, Vol. 3, No. 3, 19-26, (ISSN 2249-6890).

72. A.V.N.L. Sharma, K.Venkatasubbaiah and P.S.N. Raju (2013): ‘Parametric Analysis and Multi Objective Optimisation of Cutting Parameters in Turning Operation of EN353-With CVD Cutting Tool Using Taguchi Method’, International Journal of Engineering and Innovative Technology, Vol. 2, No. 9, 283-289, ISSN 2277-3754.

73. O.Rama Mohana Rao, K.Venkatasubbaiah, K.Narayana Rao and T. Srinivasa Rao(2013): ‘Application of Univariate Statistical Process Control Charts for Improvement of Hot Metal Quality- A Case Study’, International Journal of Engineering Research and Applications Vol. 3, Issue 3, 635-641.

74. K.V.P.Chakradhar,K.Venkata Subbaiahand K.Devaki Devi (2013): ‘Optimization Studies on Mechanical Properties Of Montmorillonite (mmt) Clay Filled Epoxy/Polyester Nanocomposite’ , Malyasian Polymer Journal, Vol.8, No.2, 34-40. (ISSN: 1823-7789)

75. O.Rama Mohana Rao, K.Venkatasubbaiah, K.Narayana Rao and T. Srinivasa Rao(2013): 'Application of Multivariate Control Chart for Improvement in Quality of Hotmetal- A Case Study', International Journal for Quality Research, Vol. 7, No. 4, pp: 623-640.

76. G.Venkatesha Prasanna and K. Venkata Subbaiah (2013), ‘Hardness, tensile properties and morphology of blend hybrid biocomposites’, Scholarly Journal of Engineering Research, Vol.2, No.1, 21-29.

77. K.G. Durga Prasad, K.Venkata Subbaiah and K.Narayana Rao (2014): ‘Multi-objective optimization approach for cost management during product design at the conceptual phase’, Journal of Industrial Engineering International, Vol.10, No.1, 1-12.

78. M. Kaladhar, K. Venkata Subbaiah, Ch. Srinivasa Rao (2014): Simulataneous optimization of multiplr responses in turning operations, Proc. IMech E Part B: Journal of Engineering Manufacture, Vol. 228(7), 707– 714.

79. K.Venkatasubbaiah, N.Chandra Shekhar, and K.Narayana Rao (2014):‘Prioritization of design requirements for quality engineering education’, International Journal of Applied Management Sciences and Engineering,Vol.1, No.1, 17-40.

80. K.Venkatasubbaiah, K. Arun, S B V K Chand Badshah, M. Gopal Krishna and K.Narayana Rao (2014): ‘Investigating green supply chain management approaches using analytic network process’, International Journal of Advanced Scientific and Technical Research, Vol. 4, No. 2, 2680279, ISSN 2249-9954.

81. P. Jamaleswara Kumar, K.Venkatasubbaiah and K.Narayana Rao (2014):’Determination of supply chain strategy determinants through conformatory factor analysis - a case study’, International journal of applied science, technology and engineering research, Vol. 3, No. 3, 32-49, ISSN 2315-6783.

82. K.Venkatasubbaiah, N.Chandra Shekhar, and K.Narayana Rao, (2014): ‘Integrated DEA/TOPSIS approach for ranking of engineering education institutions – A case study’, International Journal of Management Science and Engineering Management, Vol.9, No.4, 249-264.

83. K.Venkatasubbaiah, K.Narayana Rao and M. Malleswara Rao (2014): ‘Evaluation of Performance of Container Terminals through DEMATEL-AHP’,

20

International Journal for Quality Research, Vol.8, No.4, 533-542. (ISSN: 1800-6450)

84. Srinivasa Reddy Vempati, K. Brahma Raju and K. Venkata Subbaiah (2014): ‘Parametric Studies on Stress Intensity Factors in A Fillet Welded Cruciform Joint’, Interational Journal of Scientific Engineering and Technology Research, Vol. 3, No. 46, 9347-9352.

85. K.G. Durga Prasad, K.Venkata Subbaiah and G. Venu Gopal Rao and G. Padmavathi (2014): Simulated Annealing for U-Shaped Line Balancing Problem’, International Journal of Advanced Research in Science and Technology, Vol.3, No.1, pp: 01-07.

86. K.G. Durga Prasad, K.Venkata Subbaiah and K.Narayana Rao (2014): 'Supply Chain design through QFD-Based optimization', Journal of Manufacturing Technology Management, Vol. 25, No.5, 721-733.

87. Mallikarjun Koripadu and K. Venkata Subbaiah (2014): 'Skill Gap Analysis for Improve Skill and Quality Deliverables’ International Journal of Engineering Research and Applications, Vol. 4, No. 10, pp: 09-11.

88. Mallikarjun Koripadu and K. Venkata Subbaiah (2014): 'Productivity Improvement by applying DILO (Time and Motion) and Lean Principles’ International Journal of Engineering Research and Applications, Vol. 4, No. 10, pp: 12-14.

89. Mallikarjun Koripadu and K. Venkata Subbaiah (2014): 'Problem Sloving Management using Six Sigma Tools & Techniques’ International Journal of Scientific & Technology Research, Vol. 3, No. 2.

90. K.Venkatasubbaiah, P. Jamaleswara Kumar and K.Narayana Rao (2014): ' Identification of Supply Chain Strategies-An Integrated Frame work’, American Journal of Science and Technology

91. K.G. Durga Prasad, M. V. Prasad and K.Venkata Subbaiah (2015): 'Optimization of Process Parameters in CNC End Milling of Glass - Fiber Reinforced Plastic', International Journal for Research in Emerging Science and Technology, Vol. 2, No. 6

92. G.V. Arunchaitanya, K. Venkatasubbaiah (2015): ‘Determination of optimal land allocation for major crops using Teaching – Learning Based Optimization Techchnique – A Case Study of Visakhapatnam Dist in Andhra Pradesh’, International Journal of Multidisciplinary Research Review, Vol.1, No.4, 60-69

93. K. Venkata Subbaiah, G. Daniel Vivek, Ch. Suresh (2015), ‘Optimization of Police Patrol Manpower Allocation Using Goal Programming Approach – A Case Study’ International Journal of Engineering Research and Applications, Vol. 5, No.10, 142-153

94. G. Samkeerth, K.Venkata Subbaiah and K.G. Durga Prasad, (2015): 'Analysis of Key Factors Affecting Labour Productivity in Steel Manufacturing Company', International Journal of Engineering and Management Research, Vol. 5, No. 5

95. S. Hemalatha, G. Rambabu, K.Narayana Rao, K.Venkatasubbaiah (2015): “Supply Chain Strategy Based Supplier Evaluation- An Integrated Framework”, International Journal of Managing Value and Supply Chains (IJMVSC), Vol. 6, No. 2

96. K.Balaji, K. Brahma Raju and K.V. Subbaiah (2016): ‘Oxidization and Hot Corrosion behavior of Inconel718 and ASS 316 Dissimilar joints in GTAW Process’, Journal of Material Science and Mechanical Engineering, Vol. 3, No. 1, 31-33.

21

97. K. Venkata Subbaiah, Rayeneni Mounica, Challa Suresh (2016), ‘Teaching Learning Based Optimization Approach for Product-Mix in a Dairy Industry’, International Journal on Recent Technologies in Mechanical and Electrical Engineering (IJRMEE), Vol. 3 Issue 6, ISSN: 2349-7947, PP: 01 – 04.

98. K. Venkatasubbaiah, Yeshwanth Sai Koneru and Challa Suresh (2016): ‘QFD–ANP Approach for the Conceptual Design of Research Vessels: A Case Study’, Journal of The Institution of Engineers (India), Series- C.

99. Ch. Maheswara Rao and K. Venkatasubbaiah (2016): Effect and Optimization of EDM Process Parameters on Surface Roughness for En41 steel, International Journal of Hybrid Information Technology, Vol. 9, No.5, 343-358.

100. Srinivasareddy Vempati, Dr. K. Brahmaraju, Dr. K. Venkata Subbaiah (2016): ‘Optimization of TIG welding parameters for maximizing weld streangth of TI 6AL 4V cruciform shape joint’ International Journal of Engineering Research and Industrial Applications, Vol. 9, No.II, (ISSN 0975-1758).

101. Ch. Maheswara Rao, K. Venkatasubbaiah, K.Sowjanya and K. Anusha (2016):Influence of Speed, Feed and Depth of Cut on Multiple Responses in CNC Turning, International Journal of Advanced Science and Technology, Vol. 92, 59-76 (ISSN 2005-4238).

102. K. Venkatasubbaiah, D.Dinesh and Challa Suresh (2016): ‘Development of a Student Database Management System for a University’, International Journal of Engineering Research and Application, Vol. 6, Issue 8, 16-24.( ISSN : 2248-9622).

103. Ch. Maheswara Rao and K. Venkatasubbaiah (2016): Optimization of Surface Roughness in CNC Turning Using Taguchi Method and ANOVA, International Journal of Advanced Science and Technology, Vol. 93, 1-14 (ISSN 2005-4238).

104. K. Venkatasubbaiah, Ch. Raju and Ch. Suresh (2016): “Influence of cutting parameters on Roughness characteristics: Hard Turning of AISI 4340 Steel with Wiper Ceramic Inserts”. International Journal for Research & Development in Technology, Vol. 6, No. 2, PP: 31-36.

105. M. Prem Sai, K.Venkatasubbaiah, Shaik Rehana (2016): 'Design  and Optimization of Band Pass Filter in Telephones Using Taguchi Technique', International Journal of Advance Research and Latest Trends" Vol. 8, No.8, Pg: 1942-1946

106. Ch. Maheswara Rao, K. Venkata Subbaiah and Ch. Suresh (2016), “Prediction of Optimal Designs for Material Removal Rate and Surface Roughness Characteristics”, International Journal of Lean Thinking, Vol-7, Issue-2, pp.24-46

107. Ch. Maheswara Rao and K. Venkata Subbaiah (2016), “Application of MCDM Approach-TOPSIS for the Multi-Objective Optimization Problem”, International Journal of Grid and Distributed Computing, ISSN: 2005-4262, Vol-9, No.10, pp.17-32.

108. Ch. Maheswara Rao and K. Venkata Subbaiah(2016), “Application of WSM, WPM and TOPSIS Methods for the Optimization of Multiple Responses”, International Journal of Hybrid Information Technology, ISSN: 1738-9968, Vol-9, No.10, pp.59-72.

109. Ch. Maheswara Rao, K. Venkata Subbaiah and K. Jagadeeswara Rao (2016), “Experimental Investigation of Surface Roughness Characteristics Ra, Rq and Rz”, International Journal of Hybrid Information Technology, ISSN: 1738-9968, Vol-9, No.7, pp.373-388.

22

110. Ch. Maheswara Rao and K. Venkata Subbaiah (2016), ' Effect and Optimization of EDM Process Parameters on Surface Roughness for EN 41 Steel', International Journal of Hybrid Information Technology, ISSN: 1738-9968, Vol-9, No.5, pp. 343-358

111. Ch. Maheswara Rao and K. Venkata Subbaiah (2016), ' Optimization of Surface Roughness in CNC Turning using Taguchi Method and ANOVA', International Journal of Advanced Science and Technology, Vol.93. pp: 1-14.

112. Kammuluri.Baburaja, Dr.Kambagowni.VenkataSubbaiah, Dr.Ramakotaiah Kalluri, " Hybrid materials of aluminium" Materials Today: Proceedings 3 (2016) 4140–4145

113. Shaik Rehana, K.Venkatasubbaiah, M. Prem Sai (2017): "Solving A Capacitated Vehicle Routing Problem using Meta Heuristic Algorithm", "Imperial Journal of Interdisciplinary Research", Vol. 3 No. 1, Pg: 804-808.

114. P. Bhanu Prakash, V.Ramya, K. Brahma Raju, K.Venkata Subbaiah, N.ManiKandan, (2017), ” Development of Aluminium 6061 Silicon Carbide (SiC) Composites using Stir Casting Technique”, International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE), Vol 2, Issue 3, pg: 119-121.

115. Ch. Maheswara Rao, K. Venkata Subbaiah and Ch. Suresh (2017), “Optimization of Cutting Parameters Using Weighted Principal Component Analysis (WPCA) Combined with Grey Relational Analysis (GRA) While Turning of AA7075”, International Journal of Hybrid Information Technology, ISSN: 1738-9968, Vol-10, No.1,, pp.47-62.

116. Dr.K. Venkata Subbaiah, Fiaz khan, Challa Suresh (2017): “Optimization of Process Parameters in CNC Drilling of EN 36” SSRG International Journal of Mechanical Engineering (SSRG-IJME) – Special Issue May - 2017, ISSN: 2348 – 8360, PP: 213-221

117. K.G.Durga Prasad, K.Venkata Subbaiah, Ch.Hima Gireesh, U.Koushik (2017): “Evaluation of Conceptual Product Design Solutions using House of Quality-TOPSIS Integrated Methodology” SSRG International Journal of Mechanical Engineering (SSRG-IJME) – Special Issue May - 2017, ISSN: 2348 – 8360, PP: 206-212

118. V.V. K. Lakshmi and Dr. K. Venkata Subbaiah,Dr. Sarojini J and. Dr. Shabana (2017): “Study of Mechanical Properties and Wear Behaviour of Sugarcane Ash Reinforced Aluminium Composite”,  International Journal of Mechanical Engineering and Technology (IJMET), Vol. 8 No.6  Pg: 597-606.

119. K. Venkatasubbaiah, Ch. Raju, R. S.Pawade and Ch. Suresh (2017): “Hard Turning With Wiper Ceramic Insert; Parametric Analysis and Optimization with Desirability Approach”, International Journal of Engineering Trends and Technology (IJETT) – Vol. 49 No. 7, ISSN: 2231-5381, PP: 430-436.

120. K. Venkatasubbaiah, Ch. Raju and Ch. Suresh (2017): “Comparative Assessment of Cutting Inserts andOptimization during Hard Turning: Taguchi-BasedGrey Relational Analysis”, IOP Conference Series: Materials Science and Engineering, Vol. 225, 012165.

121. K.G. Durga Prasad, K.Venkata Subbaiah and M.V. Prasad (2017) : “Supplier evaluation and selection through DEA-AHP-GRA integrated approach- A case study”, Uncertain Supply Chain Management, Vol. 5. Pg. 369–382

23

122. S. Hemalatha, G. Rambabu, K.Narayana Rao, K.Venkatasubbaiah (2017): “Supply chain performance evaluation through AHM and Membership degree transformation”, Materials Today: Proceedings 4 (2017) 7848–7858.

123. K.Venkatasubbaiah, K.Narayana Rao, M. Malleswara Rao and Ch. Suresh (2017): ‘Performance Evaluation and Modeling of Container Terminals’, Journal of The Institution of Engineers (India), Series- C, Vol. 99, No. 1, PP:87-96

124. K.Baburaja, .K.Venkata Subbaiah, T.Vanaja, .N.N.Ramesh(2017), " Resultant Surface Roughness Aluminiumand Hastelloy C-276 Using Wire Electro Discharge Machining" Materials Today Proceedings, Elsevier , vol4 pg: 1013-1018

125. Ch. Suresh, Dr. K. Venkata Subbaiah, Ch. Raju (2018): “Effect of Process Parameters on Surface Roughness of HSS M35 in Wire-EDM during Taper Cutting” International Journal of Advanced Mechanical Engineering (IJAME),Vol. 8, No.1, pp. 127-136, ISSN 2250-3234.

126. CH. Raju, Dr. K. Venkata Subbaiah, Ch. Suresh, Ch. Maheswara Rao (2018): “Predictive Modeling of Tool Wear, Surface Roughness and Machining Force in Hard Turning using Taguchi Approach”. International Journal of Advanced Mechanical Engineering (IJAME), Vol. 8, No.1, pp. 119-126, ISSN 2250-3234.

127. V.V. K. Lakshmi, Dr. K. Venkata Subbaiah, Ch. Suresh (2018): “Optimization of Machining Parameters on Sugarcane Ash Aluminium Composite for Optimum Power Consumption and Roughness”, International Journal of Advanced Mechanical Engineering (IJAME), Vol. 8, No.1, pp. 137-148, ISSN 2250-3234.

128. P. Bhanu Prakash, K. Brahma Raju, K.Venkata Subbaiah, N.ManiKandan (2018), “Microstructure Analysis and Evaluation of Mechanical Properties of Al 7075 GNP’s Composites”, Materials Today Proceedings, Elsevier. Vol. 5, No.6, 14281-14291.

129. P. Bhanu Prakash, K. Brahma Raju, K.Venkata Subbaiah, P.C. Krishnamachary, N.ManiKandan (2018), “Application of Taguchi based Grey Method for Multi Aspects Optimization on CNC Turning of AlSi7 Mg”, Materials Today Proceedings, Elsevier, Vol. 5, No.6, 14292-14301.

130. Ch. Suresh, Dr. K. Venkata Subbaiah, Ch. Raju (2018): “Prioritization of Wire EDM Response Parameters using Analytical Network Process”, International Journal of Research and Analytical Reviews, Vol. 5, No.4, pp: 42-46.

131. Dr. K. Venkata Subbaiah, Dr. K. Brahmaraju, Srinivasareddy Vempati(2018): "Examination of Hardness Values for Ti-6Al-4V Welded Specimens and Micro Structural Characterization of Fractured specimens", International Research Journal of Engineering and Technology (IRJET), Vol. 5, No. 12, 371-375

132. K.Venkata Subbaiah, Srinivasa Reddy Vempati, K.Brahma Raju. (2018) “Fatigue loading on Ti-6Al-4V cruciform shape welded joints with different weld bead shapes, International Journal of Mechanical and Production Engineering Research and Development, (IJMPERD).Vol, 8,(6), 819-826. ISSN(P): 2249-6890; ISSN(E): 2249-8001 (Scopus indexed)

133. K.Venkata Subbaiah, K.Brahma Raju, Srinivasa Reddy Vempati (2018) “Examination of Hardness values for Ti-6Al-4V welded specimens and micro structural characterization of fractured specimens” International Research Journal of Engineering and Technology, Vol 5, Issue 12 ,371-375 E-ISSN: 2395-0056

134. S. Hemalatha, K.Venkatasubbaiah, G. Rambabu, K.Narayana Rao (2018): “Modeling and Analysis of A Four Stage Supply Chain under Fuzzy Environment”, International Journal of Enterprise Network Management (IJENM), Vol. 9, No. 2

24

135. K. Venkatasubbaiah, Ch. Raju and Ch. Suresh (2018): “Determining the Effect of Material Hardness on Surface Roughness Characteristics During the Hard Turning”, Journal of The Institution of Engineers (India): Series D, Springer, Vol. 99, No.2, pp: 185-192, ISSN: 2250-2122

136. P. Bhanu Prakash, K. Brahma Raju, K.Venkata Subbaiah (2018), “Development and characterization of Al-GNP composites by stir casting method”, SAE International - 2018-28-0096 Published 09 Jul 2018.

137. K. Venkata Subbaiah , Kammuluri Baburaja (2018), "Empirical modeling and optimization of kerf width in abrasive water jet machining – a short review" International Journal of Engineering & Technology, 7 (4) (2018) 3238-3240

138. K. Venkata Subbaiah, P. Naren Chakravarthy, Bhanu Prakash Palampalle, K. Brahma Raju , J. S. Binoj ,(2018) " Microstructural Analysis And Mechanical Behaviour Of Aluminium-Gnps Composites Fabricated By Ultrasonic Assisted Stir Casting Technique" International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8, Special Issue 8, Jun 2018, 385-392. (ISSN (P): 2249-6890; ISSN (E): 2249-8001)

139. Kammuluri Baburaja, J V Abhishekb, Bandi Vamsi Krishna, K.Venkatasubbaiah Kiran Kumar Dama (2018)," Additive-Manufacturing Volumetric Errors" Journal of Advanced Research in Dynamical and Control Systems 10(6 spl. issue), pp. 1374-1378

140. Srinivasa Reddy Vempati, K.Brahma Raju, K.Venkata Subbaiah , (2018) “Optimization of Welding Parameters of Ti-6Al-4V Cruciform shape Weld joint to Improve Weld Strength Based on Taguchi Method, Materials Today Proceedings, Vol.5, 4948–4957, ISSN: 2214-7853  (Scopus indexed)

141. Srinivas Reddy Vempati , K.Brahma Raju ,K.Venkata Subbaiah. (2018) “ Estimation of fatigue life of Ti-6Al-4V welded joints using Response surface methodology and simulation through Abaqus”, International Journal of Current Engineering and Technology, Vol 8(6), 1635-1639. E-ISSN 2277 – 4106, P-ISSN 2347 – 5161

142. S.Kartikeyan, K.Venkata Subbaiah, Ch. Suresh,(2019) "Optimization of Welding parameters of Mild Steel in Gas Metal Arc Welding Using Grey based Taguchi Method" International Journal of Management, Technology and Engineering, Vol IX, Issue V, May, 3383-3394. (ISSN No: 2249-7455)

143. K.Venkata Subbaiah, Bhanu Palampalle & K. Brahmaraju (2019), " Microstructural Analysis and Mechanical Properties of Pure Al–GNPs Composites by Stir Casting Method” J. Inst. Eng. India Ser. C,100(3), 493–500

144. Ch. Neelima, K. Venkata Subbaiah, K. Narayana Rao, Ch. Suresh (2019) " Parametric optimization of Multiple Responses in Wire Electric Discharge Machining of Inconel 825 Using Taguchi Based Utility Approach", " International Journal of Management, Technology and Engineering, ISSN No: 2249-7455, Vol IX, Issue IX, 2191-2202.

145. A.Ramki, K. Brahma Raju, K. Venkatasubbaiah, Ch. Suresh, Jagadish K E (2019) " Microstructure and Hardness Characterization behavior of Al-Mg-TiB2 In-Situ Composite " International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-10, pg: 461 - 466.

146. K. Venkatasubbaiah, Ch. Raju and Ch. Suresh (2016): “Parametric Analysis and Optimization of Hard Turning at Different Levels of Hardness using Wiper Ceramic Insert”, Measurement, Elsevier. (Accepted)

25

147. K. Venkatasubbaiah, Ch. Raju, R. S. Pawade and Ch. Suresh (2018), "Machinability investigation with Wiper Ceramic Insert and Optimization during the Hard Turning of AISI 4340 Steel", Materials Today: Proceedings, ISSN: 2214-7853 (Accepted)

148. Srinivasa Reddy Vempati, K.Brahma Raju, K.Venkata Subbaiah. “Effect of residual stresses on the Ti-6Al-4V cruciform shape welded joints by XRD technique and influence of hardness –An Experiment approach” Journal of Engineering science and Technology , Vol 14, Issue 5 0ct 2019 ISSN 1823-4690 (Accepted) (ESCI & Scopus indexed)

149. Ch. Suresh, Dr. K. Venkata Subbaiah, VVK Lakshmi, Ch. Raju (2018): “Multi Objective Optimization Wire EDM Process Parameters using Taguchi Grey during Taper Cutting” International Journal of Mechanical and Production Engineering Research and Development (IJMPERD). (Under Review)

150. Ch. Suresh, Dr. K. Venkata Subbaiah, Ch. Suresh (2018): “Quota Allocation to Distributors using Bullwhip Effect and Fuzzy Goal Programming”, International Journal of Construction Supply Chain Management. (ISSN 1179-0776) (Under Review)

151. Dr. K. Venkata Subbaiah, P.V.J.S. Chandramouli, Dr. K. Narayanarao, Ch. Suresh (2018), "Multi Objective Optimization of Machining Parameters for Turning Using Genetic Algorithm", International Journal of Manufacturing Research, Inderscience. (Submitted)

152. P. Bhanu Prakash, K. Brahma Raju, K.Venkata Subbaiah (2017), “Fabrication and characterization of Pure Al -GNP’s Composites using stir casting Technique”, Journal in Advanced Manufacturing Systems (JAMS)- (Under Review)

153. Ch. Maheswara Rao, K.Venkatasubbaiah, Ch. Suresh (2017): “Multi-Objective Optimization of Material Removal Rate and Surface Roughness in Dry Turning of Aluminium Alloy AA7075 Using Taguchi-Utility Method” International Journal of Industrial Engineering Computations. (Subimtted)

154. Lakshmi Vennela, K Venkata Subbaiah, K Arun Vikram and Challa Suresh (2017): “Optimization of Machining Parameters on Sugarcane Ash Aluminium Composite Using Hybrid Taguchi ,Grey Relational Analysis and Entropy Method" , Journal of The Institution of Engineers (India): Series D. (Submitted)

155. S.V Satyaprasad, K.Venkatasubbaiah, Ch. Suresh (2017): "Influence of Turning Parameters on Surface Roughness and Flank Wear in Machining of SS304 Steel using Cryogenically Treated HSS Tool", International Journal of Machining and Machinability of Materials. (Submitted)

156. V.V. K. Lakshmi and Dr. K. Venkata Subbaiah (2018): “Micro structure and Mechanical properties of Vermiculite filled Low density Aluminum Composite for Impact Energy Absorber”, Materials Science & Engineering A. (Submitted)

157. K.Venkata Subbaiah,P. Bhanu Prakash, K. Brahma Raju(2018): "Development and Characterization of Al-GNPs Composites by Ultrasonic Assisted Stir Casting Technique",International Journal of Materials Research. (Submitted)

158. P. Bhanu Prakash, K. Brahma Raju, K.Venkata Subbaiah (2018),"Preparation and Characterization Of Pure Al -GNPs Composites Using Stir Casting Technique", Journal of Dynamic Behavior of Materials. (Submitted)

26

PUBLICATIONS IN NATIONAL JOURNALS1. M.V. Ramana Rao, B. Satyam and K. Venkata Subbaiah (1992): ‘An

analysis of non-productive man days in ship building industry – A case study’, Industrial Engineering Journal, Vol.XXI, No.2, 1-6. (ISSN: 0970-2555)

2. K. Venkata Subbaiah and M. Sugunatha Reddy (1994): ‘Job involvement, work involvement and work motivation: A study in banking industry’, Industrial Engineering Journal, Vol. XXIII, No.2, 23-26. (ISSN: 0970-2555)

3. M. Sugunatha Reddy, G.S.S. Raju and K. Venkata Subbaiah (1994): ‘Determination of optimal land allocation in agricultural planning through goal programming with penalty functions – A case study of Cuddapah District in Andhra Pradesh’, Industrial Engineering Journal, Vol. XXIII, No.4, 18-24. (ISSN: 0970-2555)

4. K. Venkata Subbaiah and B. Satyam (1994): ‘A practical method of estimating the load carrying capacity using thread mill’, Industrial Engineering Journal, Vol. XXIII, No.5, 19-25. (ISSN: 0970-2555)

5. K. Venkata Subbaiah, M. Srinivasulu and B. Satyanarayana (2000): ‘Fuzzy EOQ model with shortages’, Industrial Engineering Journal, Vol. XXIX, No.6, 8-12. (ISSN: 0970-2555)

6. K. Venkata Subbaiah, K. Lakshmana Rao, K. Narayana Rao and A. Gopi, (2003): ‘Design and evaluation of quality policies using fuzzy outranking technique – A case study’. Proceedings of International conference on Quality, Reliability and Information Technology, Trends and Future Directions, Narosa Publishing House, New Delhi, 124-131.

7. K. Narayana Rao and K. Venkata Subbaiah (2004): ‘Supplier selection in Supply Chain Management through AHP’. Proceedings of VIII Annual International Conference of the Society of Operations Management – Supply Chain Management in Global Enterprise, 72-80, Tata Mc-Graw-Hill Publishing Company Limited, New Delhi.

8. K. Venkata Subbaiah, J. Srinivas and K.V.V. Chandra Mouli (2004): ‘A neuro-genetic approach for optimization problems’, The Journal of Computer Society of India, Vol. 34, No.2, 19-23.

9. K.V.V. Chandra Mouli, J. Srinivas and K. Venkata Subbaiah (2004): ‘An improved heuristic method for transportation problem’, Industrial Engineering Journal, Vol. XXXIII, No. 7, 2-5. (ISSN: 0970-2555)

10. K. Venkata Subbaiah, K. Srinivasa Rao and B. Satyanarayana (2004): ‘Inventory models for perishable items having demand rate dependent on stock level’, Opsearch, Vol. 41, No. 4, 222-235. (ISSN:0030-3887)

11. J. Srinivas, K. Venkata Subbaiah and K.V.V. Chandra Mouli (2004): ‘An optimal sequencing approach for job shop production’, Journal of Scientific & Industrial Research, Vol. 63, 458-461.

12. K.G. Durga Prasad, K.Narayana rao, G.Padmavathi and K.Venkata Subbaiah (2004): ‘Total Quality Engineering Education: A Model Developed through QFD’, The Journal of Engineering Education, XVII, No. 4, 39-44. (ISSN: 0971-5843)

13. V.Durga Prasada Rao and K.Venkata Subbaiah (2005): ‘Analysis for absenteeism of students in a class of a college by using attributes control charts – A Case Study’, Industrial Engineering Journal, Vol. XXXIV, No.8, 30-33. (ISSN: 0970-2555)

14. K.V.V. Chandra Mouli, J. Srinivas and K. Venkata Subbaiah, (2005): ‘Particles Swarm Optimization for production planning problems’, Journal of Decision and Mathematical sciences , Vol.10, 101-112

27

15. K.Venkata Subbaiah and T.S.A. Surya Kumari, (2005): ‘Simulated annealing algorithm for mixed-model U-shaped line balancing problem’, Productivity, Vol.45, No.4, 642-647.(ISSN:0032-9924)

16. K.Venkata Subbaiah, J.Srinivas and K.V.V.Chandra Mouli, (2005): ‘An unsupervised neural network to solve transportation problems’, Journal of Production Engineering, Vol.86, 5-7.(ISSN: 0257-6708)

17. K. Venkata Subbaiah, K. Srinivasa Rao and K. Nirupama Devi, (2005): ‘An EOQ model for deteriorating items with stock dependent demand’, Assam Statistical Review, Vol.19, No.2, 84-94.

18. K.V.V. Chandra Mouli, K. Venkata Subbaiah and K. Mallikarjuna Rao, (2005): ‘An Efficient Method for Solving multi objective transportation problems’, Journal of Computer Society of India, Vol.35 No.3, 39-46.

19. K.V.V. Chandra Mouli, J. Srinivas and K. Venkata Subbaiah, (2006): ‘Optimization and output forecasting using Taguchi-Neural network approach’, Journal of Production Engineering, Vol.86, 54-57. .(ISSN: 0257-6708)

20. K.Venkata Subbaiah and V.Sangeetha, (2006): ‘Ant algorithm for simple assembly line balancing problem’, Industrial Engineering Journal, Vol. XXXV, No. 7, 16-19. (ISSN: 0970-2555)

21. K.V.V. Chandra Mouli, K. Venkata Subbaiah, K.Mallikarjuna Rao and S.G.Acharyulu, (2006): ‘Particles Swarm Optimization Approach for vendor selection’, Journal of Production Engineering, Vol.87, 3-6. .(ISSN: 0257-6708)

22. V. Durga Prasada Rao, V. Ramachandra Raju and K. Venkata Subbaiah, (2006): ‘Optimal policy curve as a means of finding optimal inventory policy - A case study’, Industrial Engineering Journal, Vol. XXXV, No. 8, 35-40. (ISSN: 0970-2555)

23. K.Venkata Subbaiah and M.Anuradha, (2006): ‘Simulated annealing algorithm for machine loading problem in FMS’, Productivity, Vol.46, No.1, 81-85. .(ISSN:0032-9924)

24. K.V.V. Chandra Mouli, K. Venkata Subbaiah and S.G.Acharyulu, (2006) ‘Optimal production planning under resource constraints’, Journal of Scientific & Industrial Research, Vol. 65, 966-969.

25. K.Venkata Subbaiah and K.Lakshmi Suneetha, (2007): ‘Hybrid simulated annealing and tabu search algorithm for the vehicle routing problem’ Industrial Engineering Journal, Vol. XXXVI, No. 2, 2-5. (ISSN: 0970-2555)

26. K.Venkata Subbaiah, V.Sangeetha and G.Venugopala Rao, (2007): ‘Ant algorithm for U- shaped line balancing problem’, Journal of Production Engineering, Vol.87, 9-13. .(ISSN: 0257-6708)

27. K. Venkata Subbaiah, K. Narayana Rao and V. Ramachandra Raju, (2007): ‘Supplier Selection in Supply Chain Management through Fuzzy Outranking Technique’ Industrial Engineering Journal, Vol.XXXVI, No.9, 17-21. (ISSN: 0970-2555)

28. K.G. Durga Prasad, K. Venkata Subbaiah, K. Narayana Rao and G.Padmavathi (2007): ‘Enhancing Engineering Education through QFD – A Case Study’, The Indian Journal of Technical Education, Vol.30, No.3, 91-98.

29. V. Durga Prasada Rao, K. Venkata Subbaiah, V. Ramachandra Raju and T. V. Subba Rao, (2007): ‘Optimization of Constrained Multi- Item Inventory Problems Using Penalty Function Approach’, Industrial Engineering Journal, Vol.XXXVI, No.9, 26-29. (ISSN: 0970-2555)

30. Neelufur, K. Venkata Subbaiah and K.Nirupama Devi, (2007): ‘Optimization of material handling cost – A case study’, Industrial Engineering Journal, Vol.XXXVI, No.11, 37-43 . (ISSN: 0970-2555)

28

31. K. Venkata Subbaiah, K. Narayana Rao, A. Gopi and N. Sujatha, (2007): ‘Product mix analysis in a diary – A Case Study’, Journal of Agricultural Engineering, Vol.88, 35-38.

32. K.G. Durga Prasad, K. Narayana Rao, G.Padmavathi and K. Venkata Subbaiah (2008): ‘Development of Total Quality Engineering Education model using QFD’, The Journal of Engineering Education, Vol.XXI, No.4, 1-6. (ISSN: 0971-5843)

33. Neelufur and K. Venkata Subbaiah, (2008): ‘Statistical Process Control in a Fertilizer Industry’, Industrial Engineering Journal, Vol. I, No.3, 9-13. (ISSN: 0970-2555)

34. K. Venkata Subbaiah, A.V.L.N.Sharma, G.V.S.Raju and Altab H. Basha (2008): ‘Facilities layout optimization using Genetic Algorithm’. Proceedings of ICACT, 32-36, B.S.publications. (ISBN: 978-81-7800-188-3)

35. V. Durga Prasada Rao, K. Venkata Subbaiah and V. Ramachandra Raju, (2009): ‘Optimization of constrained Multi-item Inventory Problems using Genetic Algorithm’, Industrial Engineering Journal, Vol. I, No.7, 21-28. (ISSN: 0970-2555)

36. G.V.Pratap Singh, K.Venkata Subbaiah and K.Narayana Rao (2009): ‘Fuzzy Outranking Approach to Vendor Selection’ Manufacturing Technology and Management, Quarterly Journal of the IIPE, Vol. 3, No.1, 54-58. (ISSN: 0974-6692)

37. V. Durga Prasada Rao, K. Venkata Subbaiah, V. Ramachandra Raju and K. Narayana Rao (2009): ‘Optimization of Multi-item Fuzzy Lot Sizing Problems using Genetic Algorithm’, Industrial Engineering Journal, Vol. II, No.6, 29-32. (ISSN: 0970-2555)

38. J.Sudhir kumar, K. Venkata Subbaiah and P.V.V. Prasada Rao (2010): ‘Management of Muncipal solid waste by vermi compost – A case study’, Environmental pollution control journal, Vol.13, No.5, 70-74.

39. K. Venkata Subbaiah, A.V.L.N.Sharma, and A.Gopichand (2010): ‘Modeling & Simulation of Planning decisions in FMS using Artificial Intelligence’. Proceedings of ICMOT, 365-379, B.S.publications. (ISBN: 978-81-8465-701-2)

40. S.Narayana Rao, K.Venkata Subbaiah and B.Satyanarayana (2011): ‘Experimental Evaluation of the influence of CNT inclusion in cutting fluids’ Manufacturing Technology and Management, Quarterly Journal of the IIPE, Vol.5, No.3, 24-26. (ISSN: 0974-6692)

41. K.Venkata Subbaiah, K.Durga Rani and G.Padmavathi (2011): ‘Two Server Interdependnet Heterogenous Queueing Model with Balking’ Manufacturing Technology and Management, Quarterly Journal of the IIPE, Vol.5, No.3, 54-58. (ISSN: 0974-6692)

42. V. Durga Prasada Rao, V. Ramachandra Raju ,K. Venkata Subbaiah and P.V.Kumar Raju (2012): ‘Optimization of product mix in a paper mill using branch and bound paradigm - A case study’, Industrial Engineering Journal, Vol. II, No. 4, 13-16. (ISSN: 0970-2555)

43. K.V.P.Chakradhar, K.Venkata Subbaiah, M.Ashok Kumar , G.Ramachandra Reddy and A.Varada Rajulu (2011): Polyester Nanocomposites: Effect of hydrophilic clay on chemical resistance, Macromolecules: An Indian Journal, Vol.7, No.3, 1-4.

44. V. Durga Prasada Rao, K. Venkata Subbaiah, V. Ramachandra Raju and T.V.Subba Rao (2012): ‘Multi-objective Optimization of Multi-item Inventory Problems using Genetic Algorithm’, Industrial Engineering Journal, Vol. V, No.7, 6-10. (ISSN: 0970-2555)

29

45. J.Sudhir kumar, K. Venkata Subbaiah and P.V.V. Prasada Rao (2012): ‘Vermi composting - Organic waste management and disposable’, J. Environ. Science & Engg, Vol.54, No.1, 134-139.

46. K.G. Durga Prasad, K. Venkata Subbaiah, Ch. Venu Gopala Rao and K. Narayana Rao (2012), ‘Supplier Evaluation through Data Envelopment Analysis’, Journal of Supply chain Management Systems, Vol.1, No.2, 1-11.

47. K.Venkata Subbaiah and U.Adinarayana (2012): ‘Organization culture and job involvement in cement industry-A study’, Prastuti Journal of Management and Research, Vol.01, No.1, 55-61. (ISSN: 2320-2262)

48. K. Venkata Subbaiah, Dr. S.V. Uma Maheswara Rao and Smt. G. Hemalatha (2012): ‘ A Production inventory model for perishable items with shortages’ Manufacturing Technology and Management, Quarterly Journal of the IIPE, Vol.6, No.3, 23-27. (ISSN: 0974-6692)

49. A.V.N.L. Sharma, K.Venkatasubbaiah, and V. Diwakar Reddy (2013), ‘Influence of Cutting Parameters on surface roughness Metal removal rate and power consumption on EN353 with Coated Tools by ANOVA’, Central Manufacturing Technology Institute, Manufacturing Technology Today, Vol. 12, No. 3, 10-23, ISSN 0972-7396.

50. V. Durga Prasada Rao, V. Ramachandra Raju, K. Venkata Subbaiah and T V Subba Rao (2013): ‘Genetic Algorithm Approch To Economic Lot Size Scheduling Problem’, Industrial Engineering Journal, Vol. VI, No. 10, 20-24. (ISSN: 0970-2555)

51. Dr. S. V Uma Maheswara Rao, Prof. K. Venakata Subbaiah (2014), ‘Development of Multiple- lot Scheduling Algorithm for Optimization of Makespan time’ Manufacturing Technology and Management, Quarterly Journal of the IIPE, Vol. 8, No.3, 1-7

52. Smt. G. Hemalatha, Dr. S. V Uma Maheswara Rao, Prof. K. Venakata Subbaiah (2014), ‘A Production Inventory Model for Perishable items with Shortages ’ Manufacturing Technology and Management, Quarterly Journal of the IIPE, Vol. 8, No.3, 11-18

53. K. Durga Rani, K. Venakata Subbaiah, SSSV Gopala Raju, K.V.G.D Balaji (2014), ‘A Study on Engineering Graduates in India’ The Indian Journal of Technical Education, Vol. 37, No.2, 13-16.

54. Ch. Maheswara Rao and K. Venkata Subbaiah (2017), ' Preference Number Based Taguchi-Utility Method for the Optimization of Multiple Responses', Journal of Recent Activities in Production. Vol.3. No.2

55. Ch. Maheswara Rao and K. Venkata Subbaiah (2017), ' Multi-Objective Optimization of Material Removal Rate and Surface Roughness in Dry Turning of Aluminium Alloy AA7075 Using Taguchi-Utility Method', Journal of Recent Activities in Production. Vol.3. No.2

56. Ch. Maheswara Rao and K. Venkata Subbaiah (2017), ' Investigation of the Impact of Nose Radius on the Multiple Performance Characteristics', Journal of Recent Activities in Production. Vol.3. No.2

PUBLICATIONS IN PROCEEDINGS OF CONFERENCES/SEMINARS

1. K. Venkata Subbaiah, M. Srinivasulu and B. Satyanarayana (1998): ‘Fuzzy EOQ model with budget constraint’, Proceedings of National Seminar on Fuzzy Technique Applications in Manufacturing and Engineering. 24-29.

2. K. Venkata Subbaiah, E. Srinivasa Reddy, B. Satyanarayana and K. Narayana Rao (1998): ‘Project management with fuzzy project network analyses,

30

Proceedings of National Seminar on Fuzzy Technique Applications in Manufacturing and Engineering. 145-155.

3. K. Venkata Subbaiah, K. Narayana Rao and V. Ramachandra Raju, (2005): ‘Evaluation of Supply Chain through Response Surface Methodology’ Proceedings of 10th Annaul International Conference on “Industrial Engineering Theory, Applications and Practice”. Clear Water Florida, USA, December, 53-58.

4. K. Venkata Subbaiah, K. Narayana Rao and K.G. Durga Prasad, (2005): ‘ Evaluation of design requirements for quality engineering education using fuzzy outranking technique – a case study’ Proceedings of 10th Annaul International Conference on ”Industrial Engineering Theory, Applications and Practice”. Clear Water Florida, USA, December, 710-717.

5. V. Durga Prasada Rao, K. Venkata Subbaiah, V. Ramachandra Raju and T.V. Subbarao, (2005): ‘Genetic algorithm approach to solve multi – item inventory problems’, Proceedings of International Conference on Operations Research Applications in Infrastructure Development, Bangalore, December, 27- 29.

6. K. Narayana Rao and K. Venkata Subbaiah (2005): ‘World Trade Organization- Role of Engineering Profession’ Proceedings of Seminar on World Trade Organization and Engineering Profession , Visakhapatnam, September, 10-13

7. V.Pavitra and K. Venkata Subbaiah (2005): ‘ The Measurement of Production and International Trade in Service and GATS’ Proceedings of Seminar on World Trade Organization and Engineering Profession , Visakhapatnam, September, 26-32

8. Cdr. S.V. Uma Maheswara Rao, K. Venkata Subbaiah and G. Padmavathi (2007): ‘Convergence of Technologies for Rapid Development’ Proceedings of Seminar on Convergence Technologies for Rapid Development , Visakhapatnam, September, 20-24

9. V.Durga Prasada Rao, K. Venkata Subbaiah , V.Ramachandra Raju and T.V.Subbarao (2009): ‘ Optimization of Cutting Parameters in Shaping by Taguchi Method’ Proceedings of NCAMIT-2009 Jammu, 132-138

10. K.G.Durga Prasad, K.Venkata Subbaiah and K.Narayana Rao (2010):‘Aligning the competitive strategy with supply chain strategy through QFD’, Proceedings of 3rd International Conference and 24th All India Manufacturing Technology, Design and Research (AIMTDR) held at Andhra University, Visakhapatnam, India , December, Vol.2, 815-820.

11. G.V.Pratap Singh, K.Venkata Subbaiah and K.Narayana Rao (2010):‘Supplier Selection in Supply chain management through Fuzzy Topsis’, Proceedings of 3rd International Conference and 24th All India Manufacturing Technology, Design and Research (AIMTDR) held at Andhra University, Visakhapatnam, India , December, Vol.2, 853-858.

12. K. Venkata Subbaiah, Gopi Annepu and N.R.Kandukuri (2010): ‘Economic and Ecological based Land allocation in Fuzzy environment-A case study’, Proceedings of 25th Indian Engineering Congress, Kochi, India, 15-17 December.

13. K. Venkata Subbaiah, Sudhir Kumar. J and P.V.V. Prasada Rao (2010):‘Experimental study of exhaust emissions & performance analysis of single cylinder SI engine with plastic petrol derived from plastic waste’, Proceedings of 25th Indian Engineering Congress, Kochi, India, 15-17 December.

14. J. Sudhir Kumar, Dr. K. Venkata Subbaiah, Dr. P.V.V.Prasada Rao (2011): ‘Waste to Energy’, 2nd national conference on Urban, Industrial and Hospital Waste Management , Ahmedabad Management Association (AMA), Ahmedabad, 147-151.

31

15. K.Venkata Subbaiah, N.R Kandukuri, Ch Raju and G.V Pratap Singh (2011): ‘Multi –echelon Supply chain network design in fuzzy environment’, Proceedings of the International Congress on Productivity, Quality, Reliability, Optimization and Modelling, Allide Publishers Pvt. Ltd., New Delhi, Vol. I, 705-716.

16. N.Chandra Sekhar, K.Venkata Subbaiah and N.R Kandukuri (2011): ‘Cross efficiency approach for ranking of engineering education institutions(EEIs) - A case study’, Proceedings of the International Congress on Productivity, Quality, Reliability, Optimization and Modelling, Allide Publishers Pvt. Ltd., New Delhi, Vol. II, 885-897.

17. Gopi Annepu, K.Venkata Subbaiah and N.R Kandukuri (2011): ‘Fuzzy Compensation Approach for Land Allocation in Agricultural Planning: A Case Study’, Proceedings of the International Congress on Productivity, Quality, Reliability, Optimization and Modelling, Allide Publishers Pvt. Ltd., New Delhi, Vol. II, 921-931.

18. Gopi, Annepu, K.Venkata Subbaiah and N.R.Kandukuri (2011):‘ Ecological agricultural planning for optimal land allocation’, Proceedings of 27th National convention of Chemical Engineers on Bio-fuels towards energy security and environment protection, Visakhapatnam, India, September 30-October 1, 52-62.

19. J. Sudhir Kumar, Dr. K. Venkata Subbaiah, Dr. P.V.V.Prasada Rao (2011): ‘Fuel from plastic waste’, Proceedings of 27th National convention of Chemical Engineers on Bio-fuels towards energy security and environment protection, Visakhapatnam, India, September 30-October 1, 92-96.

20. S.V.Uma Maheswara Rao and K. Venkata Subbaiah (2011): ‘Bio Fuels – Hope for future’, Proceedings of 27th National convention of Chemical Engineers on Bio-fuels towards energy security and environment protection, Visakhapatnam, India, September 30-October 1, 92-96

21. K.Venkata Subbaiah, P. Nava Ratna Kumar, Ch. Raju (2013): ‘Optimization of Wire-EDM process parameters using Gray-Taguchi technique for cutting HCHCR material’ Presented at 28th Indian Engineering Congress, on 20-22, December 2013, Chennai, India.

22. K.Venkata Subbaiah, K.G.Durga Prasad, N. Sameera (2013): ‘Kano-GRA-HOQ Approach for prioritizing the supplier selection attributes- A Case Study’ Presented at 28th Indian Engineering Congress, on 20-22, December 2013, Chennai, India.

23. Dr. K. Venkata Subbaiah, Ch. Suresh, Ch. Raju (2016): “Surface Roughness and Tool Wear Optimization in Hard Turning Using Taguchi Based Utility Concept during Comparative Assessment of Inserts”, Presented at Indian Engineering Congress (IEC) 2016, Kolkata, during 15th and 18th December 2016.

24. Dr. K. Venkata Subbaiah, Ch. Raju & Ch. Suresh (2016): “Comparative Assessment of Cutting Inserts and Optimization during Hard Turning: Taguchi-Based Grey Relational Analysis”, Presented at International Conference on Advanced Material Technologies (ICAMT)-2016, Visakhapatnam, during 27 -28 December 2016.

25. V.V. K. Lakshmi and Dr. K. Venkata Subbaiah (2016): “Multi-Response Optimization of Machining Parameters Aluminum Sugarcane Bagasse Ash Composite Through Taguchi – Grey Relational Entropy Method”, Presented at International Conference on Advanced Material Technologies (ICAMT)-2016, Visakhapatnam, during 27 -28 December 2016.

26. Ch. Suresh, K. Venkata Subbaiah, Ch. Maheswara Rao (2017): “Experimental Investigation on Effect of Cutting Parameters in Drilling of EN36 Steel” A One Day National Conference on “Nascent Technologies in Mechanical Engineering for

32

Sustainable research”, University College of Engineering, JNTU Kakinada, Vizianagaram on 7th October, 2017

27. Ch. Maheswara Rao, K. Venkata Subbaiah, Ch. Suresh, B. Nagaraju (2017): “Optimization of Multiple Responses using Utility Method”, A One Day National Conference on “Nascent Technologies in Mechanical Engineering for Sustainable research”, University College of Engineering, JNTU Kakinada, Vizianagaram on 7th October, 2017

28. Ch. Suresh, Dr. K. Venkata Subbaiah, Ch. Raju (2017): “Effect of Process Parameters on Surface Roughness of HSS M35 in Wire-EDM during Taper Cutting” 2nd National Conference on Multi-Dimensional Advancement in Mechanical Engineering, Government College of Engineering, Kalahandi, Bhawanipatnam, Odisha during 27 & 28 December 2017.

29. CH. Raju, Dr. K. Venkata Subbaiah, Ch. Suresh, Ch. Maheswara Rao (2017): “Predictive Modeling of Tool Wear, Surface Roughness and Machining Force in Hard Turning using Taguchi Approach”. 2nd National Conference on Multi-Dimensional Advancement in Mechanical Engineering, Government College of Engineering, Kalahandi, Bhawanipatnam, Odisha during 27 & 28 December 2017.

30. V.V. K. Lakshmi, Dr. K. Venkata Subbaiah, Ch. Suresh, Ch. Raju (2017): “Optimization of Machining Parameters on Sugarcane Ash Aluminium Composite for Optimum Power Consumption and Roughness”, 2nd National Conference on Multi-Dimensional Advancement in Mechanical Engineering, Government College of Engineering, Kalahandi, Bhawanipatnam, Odisha during 27 & 28 December 2017.

PAPERS PRESENTATED AT CONFERENCES / SEMINARS

1. K. Venkata Subbaiah, B. Satyanarayana, K. Srinivasa Rao and K. Nirupama Devi (1999): ‘Perishable inventory model with stock dependent demand and weibull rate of deterioration’, Paper presented at XIX Annual Conference of ISPS and National Seminar on Stochastic Modeling and its Applications. Visakhapatnam.

2. K. Venkata Subbaiah, K.G. Durga Prasad, B. Satyanarayana and K. Narayana Rao, (2003): ‘Application of QFD for improving engineering education – A study’, presented at International conference on Quality, Reliability and Information Technology: Trends and Future Directions, New Delhi.

3. K. Narayana Rao, Ch.Raju, R.Bhaskara Rao and K. Venkata Subbaiah, (2003): ‘Classification of companies through neural network approach’, presented at International conference on Quality, Reliability and Information Technology: Trends and Future Directions, New Delhi.

4. V. Durga Prasada Rao, K. Venkata Subbaiah, V. Ramachandra Raju and T.V. Subbarao, (2006): ‘Genetic algorithm to solve constrained multi-item inventory problems’, presented at Annual conference of the society of operation management, Indian Institute of Management, Ahmedabad.

5. K. Venkata Subbaiah, K.Narayana Rao and K.Nookesh babu (2008): ‘Supply chain Management in a diary industry- A Case study’ Presented at International Conference on Manufacturing Engineering and Engineering Management, part of the World Congress on Engineering 2008, London, UK.

33

6. Neelufur, Srinivasa Rao, K and Venkata Subbaiah.K (2008): ‘Optimal design of control chart with generalized Pareto in-control times’, International Conference on Operations Research for a Growing Nation, 14-17 December, 2008, Tirupati, India

7. Neelufur and Venkata Subbaiah K.,(2010) : ‘A Comparative Study of Designing the Control Chart with Random Out-of-Control Times’, International Conference on Statistics, Probability, Operations Research, Computer Science and Allied Areas, 04-08 January, 2010, Visakhapatnam, India

8. Uma Maheswara Rao, S.V., Venkata Subbaiah K and Srinivasa Rao, K.(2010): ‘An EPQ model for deteriorating items having alternating rate of production and Weibull decay’, International conference on Statistics, Probability, Operations Research, Computer Science and Allied areas, 04-08 January 2010, Visakhapatnam, India.

9. K.G.Durga Prasad, K.Venkata Subbaiah and K.Narayana Rao (2011): ‘Design of Supply chain through Quality Function Deployment’, Presented at International Congress on Productivity, Quality, Reliability, Optimization and Modelling, 7-8, February 2011, New Delhi, India.

10. K.Narayana Rao, K.Venkata Subbaiah, Ch.Venugopala Rao and R.Bhaskara Rao (2011): ‘Selection of Supply chain through integrated DEA’, Presented at International Congress on Productivity, Quality, Reliability, Optimization and Modelling, 7-8, February 2011, New Delhi, India.

11. S.V.Uma Maheswara Rao, K.Srinivasa Rao and K.Venkata Subbaiah (2011): ‘An EPQ model for deteriorating items with alternating rates of production and time dependent demand’, Presented at International Congress on Productivity, Quality, Reliability, Optimization and Modelling, 7-8, February 2011, New Delhi, India.

12. Neelufur, K.Srinivasa Rao and K.Venkata Subbaiah (2011): ‘Study of Economic Statistical Design of Control Chart with Random Out-of-Control Times’, Presented at International Congress on Productivity, Quality, Reliability, Optimization and Modelling, 7-8, February 2011, New Delhi, India.

13. Ram Mohana Rao.O, K.Venkata Subbaiah, K.Narayana Rao and T.Srinivasa Rao (2011): ‘Ensure Productivity of Hot Metal in a Blast Furnace in an Integrated Steel Plant’, Presented at International Congress on Productivity, Quality, Reliability, Optimization and Modelling, 7-8, February 2011, New Delhi, India.

14. I V Mallikharjuna Kishan, K V Rammohan Rao and K.Venkata Subbaiah, (2011): ‘optimization of Bi-Criteria scheduling on parallel machines using Genetic Algorithm.’, Presented at 26th Indian Engineering Congress, on 15-18, December 2011, Bangalore, India.

15. K.Arun, A. Prudhvi, I V Mallikharjuna Kishan, and K.Venkata Subbaiah, (2011): ‘Fuzzy Aproach for a Machine Loading Problem’, Presented at 26th Indian Engineering Congress, on 15-18, December 2011, Bangalore, India

16. N. V S Raju, and K.Venkata Subbaiah, (2011): ‘Lean Supply Chain Management in Steel Industry.’ Presented at 26th Indian Engineering Congress, on 15-18, December 2011, Bangalore, India.

17. K.Mallikarjun. and K.Venkata Subbaiah, (2011): ‘Service Sectors Growth in India: Can Integration of Lean Six Sigma be a Solution?’ Presented at 26th Indian Engineering Congress, on 15-18, December 2011, Bangalore, India.

18. Ram Mohana Rao.O, K.Venkata Subbaiah and K.Narayana Rao (2011): ‘Ensure High Quality Hot Metal in a Blast Furnace: A Case Study in an Integrated

34

Steel Plant’, Presented at 26th Indian Engineering Congress, on 15-18, December 2011, Bangalore, India

19. K.Venkata Subbaiah, G. Padmvathi, K.G. Durga Prasad and K.Narayana Rao (2011): ‘Enhancing Quality in Engineering Educational Institutions- Six Sigma Approach’, Presented at 26th Indian Engineering Congress, on 15-18, December 2011, Bangalore, India

20. S.V.Uma Maheswara Rao and K.Venkata Subbaiah, (2011): ‘Air Pollution- Developments in Marine Diesel Engines’, Presented at 26th Indian Engineering Congress on 15-18, December 2011, Bangalore, India

21. M Srinivasulu and K.Venkata Subbaiah (2011): ‘Multi Item EOQ Model With Budget Constraint in Fuzzy Environment’, Presented at 26th Indian Engineering Congress, on 15-18, December 2011, Bangalore, India.

22. K.V.P Chakradhar and K. Venkatasubbaiah (2011): “Effect of Montrmorillonite Clay on Mechanical Properties of Epoxy/Unsaturated Polyster Blend Nano Composite”, Presented at 26th Indian Engineering Congress, on 15-18, December 2011, Bangalore, India.

23. N Chandra Shekar, K.Venkata Subbaiah and K Narayana Rao (2011): ‘Prioritization of Engineering Education Enterprise Resource Planning (EEERP) Modules through QFD ’, Presented at International Conference on Advance in Supply Chain and Manufacturing Management, on 16-18, December 2011, IIT-Khargpur, India

24. K Narayana Rao, R. Bhaskara Rao, K.Venkata Subbaiah and K Sukumar (2011): ‘Supplier Selection through Fuzzy Multiple Criteria Decision Support System’, Presented at International Conference on Advance in Supply Chain and Manufacturing Management, on 16-18, December 2011, IIT-Khargpur, India.

25. Neelufur and K.Venkata Subbaiah (2011): ‘Economic Statistical Design of -Control Chart with Random Out –of-Control Times’, Presented at International

Conference on Advance in Supply Chain and Manufacturing Management, on 16-18, December 2011, IIT-Khargpur, India

26. K.Venkata Subbaiah, B. Rama Sudheera, K Raju and K Narayana Rao (2011): ‘Fuzzy Weighted Additive Approach to Vendor Selection under Multi-Product Procurement’, Presented at International Conference on Advance in Supply Chain and Manufacturing Management, on 16-18, December 2011, IIT-Khargpur, India.

27. K.Venkata Subbaiah, Ch. Suresh, K. G. Dugra Prasad (2013): ‘Prioritization of Engineering Characteristics of a Product using HOQ-ANP Approach’, Presented at Indian Technology Congress, on 24-25, July 2013, Bengaluru, India.

28. K.Venkata Subbaiah, A.V.N.L. Sharma, C.H. Venkata Rao (2013): ‘Multi-Objective Optimization of Machining Parameters in Hard Turning Operations’, Presented at Indian Technology Congress, on 24-25, July 2013, Bengaluru, India.

29. Mallikarjun Koripadu, K.Venkata Subbaiah, (2013): ‘Problem Management using Six Sigma Tools and Techniques’, Presented at Indian Technology Congress, on 24-25, July 2013, Bengaluru, India.

30. Ch. Suresh, Ch. Raju, K. Venkata Subbaiah (2013): ‘The Optimization of Design Characteristics in Ship Building by using QFD-DSS Approach’, Presented at Twenty Seventh National convention of Marine Engineers, on 16th -17th, August 2013, Visakhapatnam, India.

31. K.Venkata Subbaiah, K.G.Durga Prasad, M.V. Prasad (2014): ‘Supplier Evaluation And Selection Through DEA-AHP-GRA Integrated Approach – A Case

35

Study’ Presented at Indian Technology Congress, on 21-22, August 2014, Bengaluru, India.

32. G. Rambabu, K.Venkata Subbaiah, B.Satyanarayana & K. Srinvasa Rao (2014): ‘Inventory Model for Deteriorating Items with Selling Price Dependent and Permissible Delay in Payments Under Inflation’ Presented at Indian Technology Congress, on 21-22, August 2014, Bengaluru, India.

33. K.Venkata Subbaiah, K.G.Durga Prasad, M.V. Prasad (2014): “Supplier Evaluation And Selection Through DEA-AHP-GRA Integrated Approach – A Case Study” Presented at Indian Technology Congress, on 21-22, August 2014, Bengaluru, India.

34. Srinivasa Reddy Vempati, Dr. K. Brahma Raju, Dr.K.Venkata Subbaiah (2014): ‘Estimating and Improving the Fatigue Strength of Butt Welding Joint by Using Fracturing Mechanics Approach’ Presented at Indian Technology Congress, on 21-22, August 2014, Bengaluru, India.

35. P.Jamaleswara kumar, K.Venkata Subbaiah, K.Narayana Rao (2014): ‘Prioritization of Measuring factors of supply chain strategies through cluster analysis and ANOVA’ Presented at International conference on ‘Advanced Materials and Manufacturing Technologies’, on 18-20, December 2014, Hyderabad, India.

36. Lt Commander A. K Shrutikar, Cdr AVSN Murty, Dr. K. Venkata Subbaiah, S.K Panigrahi (2015): ‘Infrared Signature Management in Naval Ships: A Review’ Presented at International Conference and Technology Meet on Military & Marine Applications’, on 23-25, May 2015, Pune, India.

37. Jagadish .K.E, K. Venkata Subbaiah, Mallikarjun. K (2015): ‘Facility Layout Planning using Computerized Algorithms’ Presented at Indian Technology Congress, on 29-30, July 2015, Bengaluru, India.

38. CH. Raju, Dr. K. Venkata Subbaiah, CH. Suresh (2015): ‘Influence of Material Hardness in Hard Turning with Wiper Ceramic Insert on Surface Roughness’ Presented at Indian Technology Congress, on 29-30, July 2015, Bengaluru, India.

39. CH. Suresh, Dr. K. Venkata Subbaiah, CH. Raju (2015): ‘Prioritization of Railway Passenger’S Service Quality Attributes using Factor Analysis and AHP Methodology – A Case Study’ Presented at Indian Technology Congress, on 29-30, July 2015, Bengaluru, India.

40. Dr. G. Rambabu, Prof. K. Venkatasubbaiah, CH. Suresh, D. Balaji Naik (2015): ‘QFD Approach to Road Safety - A Case Study’ Presented at Indian Technology Congress, on 29-30, July 2015, Bengaluru, India.

41. Srinivasareddy Vempati, Dr. K. Brahmaraju, Dr. K. Venkata Subbaiah (2015): ‘Geometrical Analysis of Weld Bead Shape for Titanium Alloy (Grade 5) Cruciform Welded Joint’ Presented at Indian Technology Congress, on 29-30, July 2015, Bengaluru, India.

42. K. Balaji, Dr. K. Brahma Raju & Dr. K.V. Subbaiah (2015): ‘Critical Crack Length and SIF Computation of High Grade Steel C45’ Presented at Indian Technology Congress, on 29-30, July 2015, Bengaluru, India.

43. K.Balaji, Dr. K. Brahma Raju, & Prof. K.V.Subbaiah (2016)“Oxidization And Hot Corrosion Behavior Of Inconel718 And Ass 316 Dissimilar Joints In Gtaw Process” International conference on Innovation Research in Mechanical Engineering Automotive and Aero space Technology (MEAT- 2016) on 23rd Jan 2016 at New Delhi.

36

44. Ch. Suresh, Dr. K. Venkata Subbaiah, Ch. Raju (2016): ‘Optimization of Wire-EDM process parameters using Taguchi and Grey Relational Analysis’ Presented at National Workshop on Machining & Machinability of Advanced Materials (NWMMAM- 2016), on 29th - 30th September, 2016, CSIR-CMERI, Durgapur, India.

45. Dr. K. Venkata Subbaiah, Ch. Raju, Ch. Suresh (2016): ‘Effect of Machining Parameters on surface roughness during the Hard turning of AISI 4340 Steel’ Presented at National Workshop on Machining & Machinability of Advanced Materials (NWMMAM- 2016), on 29th - 30th September, 2016, CSIR-CMERI, Durgapur, India.

46. Ch. Suresh, Dr. K. Venkata Subbaiah, Ch. Raju (2016): “Optimization Of Wire EDM Process Parameters Using Taguchi And Grey Relation Analysis” Presented at Indian Technology Congress, on 1st -2nd, December 2016, Bengaluru, India.

47. Ch. Raju, Dr. K. Venkata Subbaiah, Ch. Suresh (2016): “Multi-Objective Optimisation of Surface Roughness and MRR With Desirability and TLBO Approaches during The Hard Turning with Wiper Ceramic Insert” Presented at Indian Technology Congress, on 1st -2nd, December 2016, Bengaluru, India.

48. K. Balaji, K. Brahma Raju and Dr. K. Venkata Subbaiah (2016): “Microstructure and Hot Corrosion Behavior of Inconel 718 and ASS 316 Dissimilar Joints in GTAW Process” Presented at Indian Technology Congress, on 1st -2nd, December 2016, Bengaluru, India.

49. Srinivasareddy Vempati, K. Brahma Raju and Dr. K. Venkata Subbaiah (2016): “Optimization of Weld Parameters of Ti6Al4V Cruciform Shape Weld Joint to Improve Weld Strength Based on Taguchi Method” Presented at Indian Technology Congress, on 1st -2nd, December 2016, Bengaluru, India.

50. K. Brahma Raju, Dr. K. Venkata Subbaiah, Ch. Suresh (2016): “Optimisation of Cutting Parameters in CNC Milling using Taguchi Technique” Presented at Indian Technology Congress, on 1st -2nd, December 2016, Bengaluru, India.

51. V V K Lakshmi, Ch Suresh, Dr. K. Venkata Subbaiah (2016): “Mechanical Properties and Wear Behaviour of Sugarcane Bagasse Ash Reinforced AA6061 Composite” Presented at Indian Technology Congress, on 1st -2nd, December 2016, Bengaluru, India.

52. Dr. K. Venkata Subbaiah, Ch. Suresh, Ch. Raju (2016): “Surface Roughness and Tool Wear Optimization in Hard Turning Using Taguchi Based Utility Concept during Comparative Assessment of Inserts”, Presented at Indian Engineering Congress (IEC) 2016, Kolkata, during 15th - 18th December 2016.

53. Dr. K. Venkata Subbaiah, Ch. Raju (2016): “Analysis and Optimization of Response Parameters during hard turning with Wiper Ceramic inserts using Response Surface Methodology”, Presented at International Conference on Materials, Manufacturing and Design Engineering (ICMMD2016), Pune, during 20-21, December 2016.

54. Dr. K. Venkata Subbaiah, Fiaz khan, Challa Suresh (2017): “Optimization of Process Parameters in CNC Drilling of EN 36” National Conference on Recent Advances in Mechanical Engineering (NCRAME-2017), on 9-10th March, 2017, Andhra University, Visakhapatanam

55. K.G.Durga Prasad, K.Venkata Subbaiah, Ch.Hima Gireesh, U.Koushik (2017): “Evaluation of Conceptual Product Design Solutions using House of Quality-TOPSIS Integrated Methodology” National Conference on Recent

37

Advances in Mechanical Engineering (NCRAME-2017), on 9-10th March, 2017, Andhra University, Visakhapatanam

56. P. Bhanu Prakash, K. Brahma Raju, K.Venkata Subbaiah, P.C. Krishnamachary, N.ManiKandan, V.Ramya (2017): “Application of Taguchi based Grey Method for Multi Aspects Optimization on CNC Turning of AlSi7Mg”, International Conference on Advanced Functional Material (ICAFM 2017), Adhi College of Engineering & Technology, Chennai, during 3-5 May, 2017.

57. P. Bhanu Prakash, K. Brahma Raju, K. Venkata Subbaiah, N.ManiKandan (2017): “Multi Objective Optimization on CNC Turning of Alsi7 Mg Using Taguchi Based Grey Approach”, International Conference on Advanced Functional Material (ICAFM 2017), Adhi College of Engineering & Technology, Chennai, during 3-5 May, 2017.

58. Ch. Suresh, K. Venkata Subbaiah, Ch. Maheswara Rao (2017): “Experimental Investigation on Effect of Cutting Parameters in Drilling of EN36 Steel” A One Day National Conference on “Nascent Technologies in Mechanical Engineering for Sustainable research”, University College of Engineering, JNTU Kakinada, Vizianagaram on 7th October, 2017

59. Ch. Maheswara Rao, K. Venkata Subbaiah, Ch. Suresh, B. Nagaraju (2017): “Optimization of Multiple Responses using Utility Method”, A One Day National Conference on “Nascent Technologies in Mechanical Engineering for Sustainable research”, University College of Engineering, JNTU Kakinada, Vizianagaram on 7th October, 2017

60. Ch. Suresh, Dr. K. Venkata Subbaiah, Ch. Raju (2017): “Effect of Process Parameters on Surface Roughness of HSS M35 in Wire-EDM during Taper Cutting” 2nd National Conference on Multi-Dimensional Advancement in Mechanical Engineering, Government College of Engineering, Kalahandi, Bhawanipatnam, Odisha during 27 & 28 December 2017.

61. CH. Raju, Dr. K. Venkata Subbaiah, Ch. Suresh, Ch. Maheswara Rao (2017): “Predictive Modeling of Tool Wear, Surface Roughness and Machining Force in Hard Turning using Taguchi Approach”. 2nd National Conference on Multi-Dimensional Advancement in Mechanical Engineering, Government College of Engineering, Kalahandi, Bhawanipatnam, Odisha during 27 & 28 December 2017.

62. V.V. K. Lakshmi, Dr. K. Venkata Subbaiah, Ch. Suresh, Ch. Raju (2017): “Optimization of Machining Parameters on Sugarcane Ash Aluminium Composite for Optimum Power Consumption and Roughness”, 2nd National Conference on Multi-Dimensional Advancement in Mechanical Engineering, Government College of Engineering, Kalahandi, Bhawanipatnam, Odisha during 27 & 28 December 2017.

63. CH. Raju, Dr. K. Venkata Subbaiah, R. S. Pawade Ch. Suresh (2017) : “Machinability investigation with Wiper Ceramic Insert and Optimization during the Hard Turning of AISI 4340 Steel”, International Conference on Advances in Materials and Manufacturing Engineering, ICAMME-2018, Acharya Nagarjuna University, Guntur during 24 & 25 January, 2018.

64. V.V.K Lakshmi, K. Venkatasubbaiah, B. Surendra Babu (2018), “Effect of Hydrated Mg-Al-silicate Ceramic Particle on Microstructure and Compressive Properties of AL6063MMC” 8th International Conference on Materials Processing and Characterization (ICMPC-2018), Hyderabad

65. Ch. Suresh, Dr. K. Venkatasubbaiah, Ch. Raju, Ch. Maheswara Rao (2018), "Prediction of the Performance Characteristics of WEDM on HSS M 35 during Taper Cutting", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

38

66. Ch. Maheswara Rao, K. Venkata Subbaiah, Ch. Suresh, B. Naga Raju (2018), "Optimal Setting of Wire EDM Process Parameters Using A MCDM Method of VIKOR Analysis", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

67. Dr. K. Venkatasubbaiah, R. Rambabu, Ch. Suresh (2018), "Optimization of Milling Process Parameters using MOORA And MOOSRA Methodology", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

68. Dr. K. Venkatasubbaiah, Lijo Joseph , Ch. Suresh (2016), "Optimization of Welding Parameters for Orbital Welding of HPA System Pipe in Submarines", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

69. V.V. K. Lakshmi, Dr. K. Venkatasubbaiah, Ch. Suresh, M. VenkataRaju (2018), "Multi Objective Optimization of Dry Sliding Wear of Al 6061/Bagasse Ash Using PROMETHEE II, National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

70. Ch. Maheswara Rao, K. Venkata Subbaiah, Ch. Suresh, B. Naga Raju, T.V. Hanumantha Rao (2018), "Investigation of Effect of Cutting Parameters on the Multiple Performance Characteristics", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

71. Prof. K.Venkata Subbaiah, A.Ramki, Dr. K.Brahma Raju, Ch. Suresh, Jagadish K E (2018), "Effects of Tool Rotational Speed and Transverse Speed on Mechanical Properties of Similar and Dissimilar Aluminium Alloys Using Friction Stir Welding", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

72. Dr. K. Venkatasubbaiah, Ch. Raju, Ch. Suresh (2018), "Effect of Cutting Edge Geometry, Workpiece Hardness on Residual Stress during Hard Turning", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

73. Dr. K. Venkatasubbaiah, S. Karthieyan, Ch. Suresh (2018), "Optimization of process parameters in Gas metal arc welding using multi objective Taguchi method", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

74. Dr.K. Venkata Subbaiah, P.V.J.S.Chandramouli, Dr.K.Narayanarao, Ch. Suresh (2018), "Multi Objective Optimization of Machining Parameters for Turning Using Genetic Algorithm", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

75. K. Venkatasubbaiah, M. Ramesh Naidu, Ch. Suresh (2018), "Optimizing the Linear and Angular Distortions of Hatch Cover Girders in Cargo Ships", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

76. Sneha. H.Dhoria, V.Durga PrasadaRao, K.Venkata Subbaiah (2018), "Review on Aluminium Hybrid Metal Matrix Composites", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

77. B.B. Ashok Kumar, Ch. Maheswara Rao, K. Venkata Subbaiah, B. Naga raju, T.V. Hanumantha Rao (2018), "Application of Taguchi’s Quality Loss Method to Optimize the Multiple Responses in turning of AA7075", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

39

78. Srinivasa Rao K, K. Venkatasubbaiah, Bala Murali Krishna G, A.Prashanth (2018), "Effect of Red Mud and Mild Steel Particle on Impact Properties of New Natural Fiber Reinforced Epoxy Composites", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

79. Srinivasareddy Vempati, Dr.K.Brahmaraju, Dr. K. Venkata Subbaiah (2018), "Fatigue Life Of Ti 6al4v Cruciform Shape Welded Joint By Using Rsm Technique And Analyzing The Geometrical Parameters", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

80. Jagadish K E, Prof. K.Venkata Subbaiah, Ramki A, V Shiva Kumar(2018), "The Influence of Nickel on the Mechanical Properties of AA6061", National Conference on Recent Trends in Manufacturing, Andhra University, Visakhapatnam on 29th March, 2018

81. Dr. K. Venkatasubbaiah, Ch. Suresh, Ch. Raju (2018), “Study of Machining Characteristics of High Speed Steel M35 Using Wire-Cut EDM”, at 4th AP Science Congress, Yogi Vemana Unniversity, Kadapa during 9th – 11th November, 2018. (Accepted)

82. Suresh CH, Venkatasubbaiah K, Balaji Naik D, Raju CH (2018), “Study of Wire EDM Machining Characteristics using Taguchi Grey Relational Analysis on Cryogenic Treated HSS M35 During Taper Cutting”, at International Conference on Metallurgy (COMET)- ushering industry 4.0- 2018, IIM Bhilai, Bhilai during 26th -27th November, 2018. (Accepted)

83. Dr. K. Venkatasubbaiah, Ch. Suresh, Ch. Raju (2018), “Optimization of Wire EDM Process Parameters During Taper Cutting Using Taguchi and Grey Relational Analysis”, at 33rd Indian Engineering Congress (IEC) 2016, Udaipur, during 21st – 23rd December 2018. (Accepted)

REFRESHER / ORIENTATION COURSES ATTENDED1. Computer Numerical Computer Aided Manufacturing, Department of

Mechanical Engineering, Andhra University, 1994.2. Induction Training Course of AICTE, Academic Staff College, Andhra

University, 1995.3. SERC School on Advanced Manufacturing Technology, IIT, New Delhi, 1998.4. Orientation Course, Academic Staff College, Andhra University, 2002.5. Refresher Course in Statistics and Research Methodology, Academic Staff

College, Andhra University, 2003.

CONFERENCES / SEMINARS / WORKSHOPS ATTENDED

1. National Seminar on Fuzzy Technique Applications in Manufacturing and Engineering, Andhra University, Visakhapatnam, 1998.

2. XIX Annual Conference of ISPS and National Seminar on Stochastic Modeling and its Applications, Andhra University, Visakhapatnam. 1999.

3. 2nd International Conference on Quality, Reliability and Information Technology (Trends and Future Directions), New Delhi, 2003.

4. The 10th Annual International Conference on Industrial Engineering Theory, Applications & Practice, Clearwater Beach, Florida, USA, 2005.

40

5. Indian Engineering Congress on ‘Global Leadership in Engineering and Technology: India’s Emergent role’, Kolkata, 2005.

6. Indian Engineering Congress on ‘Challenges of engineering for sustainable 10% growth and beyond’, Guwahati, 2006.

7. 51st Congress of Indian Society of Theoretical & Applied Mechanics’, Visakhapatnam, 2006.

8. National Workshop on Composite Materials, Andhra University, Visakhapatnam, 2007.

9. 23rd National convention of Mechanical Engineers on ‘Emerging Trends in Manufacturing Systems and Technologies’ Hyderabad, 2007.

10. Indian Engineering Congress on ‘Globalization: Engineering and Technology Challenges’, Udaipur, December, 2007.

11. Indian Science Congress on ‘Knowledge based Society using Environmentally Sustainable Science and Technology’, Visakhapatnam, 3-7, January, 2008.

12. International Seminar on Modeling, Simulation and Manufacturing Systems, Visakhapatnam, 2008.

13. International Conference on Manufacturing Engineering and Engineering Management part of the World Congress on Engineering 2008, London, UK, 2008.

14. Workshop on Modeling and Analysis of Future Virtual Factories using Witness, Coimbatore, 2009.

15. International Conference on “Statistics, Probability, Operations Research, Computer Science and Alied Areas”, Andhra University, Visakhapatnam, 4-8, January 2010

16. International Congress on Productivity, Quality, Reliability, Optimization and Modeling, New Delhi, India, 7-8, February, 2011.

17. Indian Engineering Congress on ‘Globalization: Engineering and Technology Challenges’, Bangalore, 15-18, December, 2011.

18. National Workshop on “ Recent Advances in SAtistical Signal Processing and its Application, Andhra University, Visakhapatnam, 24-27, August 2012

19. 27th Indian Engineering Congress on ‘Engineering for Sustainable Development and Inclusive Growth: Vision 2025, New Delhi, 13-16, December, 2012.

20. International Conference on ‘Frontiers of Statistics and Its Applications’ and 32nd Annual Convention of Indian Society for probability and Statistics, Puduchery, 21-23, December, 2012.

21. National Seminar on “Recent Advances in Stochastic Modelic Modeling and its Application”, Andhra University, Visakhapatnam, 10-11, February, 2018

22. Indian Technology Congress on “Towards making India a Hub of Knowledge and Innovation” Bengaluru, 24-25, July, 2013.

23. The institution of engineers (India) on ”Green Initiatives in Mechanical Engineering”, Hyderabad, 13-14, November, 2013

24. 28th Indian Engineering Congress on ‘Engineering Advancements and Accelerated Nation Building”, Chennai, 20-22, December, 2013.

25. 2nd World Summit on Accreditation on ‘ International Recognition of Educational Qualifications’ National Board of Accreditation, New Delhi, 8th -10th , March 2014

26. Indian Technology Congress on “Advanced Technology as Change Agent to Make India an Economic Superpower”,NIMHANS convention center ,Bangalore, 21-22, August 2014

41

27. 29th Indian Engineering Congress on ‘Manufacturing –Key to Industrial Development’, Hyderabad,18th to 22nd, December 2014

28. National Seminar on “Recent Advances In Data Analytics & Its Applications”, AU Visakhapatnam, 13-14,March, 2015

29. International Conference on Research & Innovations in the field of Engineering and Technology, at Kuala-Lumpur(Malaysia), 2015

30. International Engineers Alliance Meet, Istanbul, Turkey, 201531. Indian Technology Congress on “Transforming India as a Global Engineering

and Technology Hub – Prospects and Pathways” Bengaluru, 29-30, July, 2015.32. International Conference on “Sustainable Infrastructure Construction for

Developing Countries”, Srilanka, 201533. 30th Indian Engineering Congress on "The Make in India Pathway",

Guwahathi, 17-20, December, 201534. 45th ISTE Annual National Convention & International Conference 0n “

Challenges & opportunities in Technical Education in The Era of Sustainable Development”, Amravati, 09-11, January 2016

35. Two Day National Workshop on “Recent Advances in Structural Health Monitoring (RASHM-2016)”, Andhra University, Visakhapatnam, 25-26, October, 2016

36. Indian Technology Congress on " Excellence in Engineering Practice: Networking and Collaboration, Bengaluru, 1st -2nd, December 2016.

37. 31st Indian Engineering Congress on " SMART Technologies for Natural Resource Conservation and Sustainable Development", Kolkata, 15-18, December, 2016

38. Two-Day National Conference on “Recent Advances in Mechanical Engineering (RAME-2017)” Andhra University, Visakhapatnam, 10 -11, March 2017

39. One day National Workshop on “A Review on Heat Transfer”, Andhra University, Visakhapatnam, 30th June, 2017

40. National Conference on “Nacsent Technologies in Mechanical Engineering for Sustainable Research“, JNTUK Viziayanagaram, 7th October, 2017.

41. “Andhra Pradesh Science Congress – 2017” by Andhra University & Andhra Pradesh Akademi of Sciences, Andhra University, Visakhapatnam, 7th – 9th November, 2017

42. 32nd Indian Engineering Congress on "Innovation in Engineering: Competitive Strategy Perspective", Chennai, 21-23, December, 2017

43. 4th Andhra Pradesh Science Congress, Yogi Vemana Unniversity, Kadapa during 9th – 11th November, 2018.

44. 33rd Indian Engineering Congress on the theme "Integration of Technologies: Emerging Engineering Paradigm", Udaipur, 21-23, December, 2018

***********

42

AWARDS RECEIVED

State Best Teacher Award from Government of Andhra Pradesh-2014

Bharat Ratna Sir M. Visvesvaraya Award-2014 Best Researcher Award-2014

Technology Excellence Award-2013 Engineer of the year Award-2013