curso extreme
TRANSCRIPT
EXTREME NETWORKS
OVERVIEW
• Capacidad de restauración de procesos por
separado:
– Telnet (11.0) – SSH / SCP (11.0) – SNMP (11.0) – TFTP (11.0) – HTTPD (11.3) – XML/SOAP (12.0) – CNA Agent (11.2) – Network Login (11.3) – LLDP (11.4) – EAPS (11.0) – VRRP (11.0) – OSPF (with Graceful Restart extensions,
11.3) – BGP (with Graceful Restart extensions,
11.4) – IS-IS (with Graceful Restart extensions,
12.1)
EXTREME XOS – RESTAURACIÓN DE PROCESOS
EXTREME XOS – SIMPLIFICADO Y SENCILLO
10.1 12.1 11.0 11.1 11.2 11.3 11.4 11.5 11.6 12.0
2003
En comparación con otros fabricantes donde…
Cada producto tiene su propio SW
El SW no es modular
Complicadas releases como las descritas en la web de este otro fabricante
ExtremeXOS simplifica los upgrades de su SW mediante:
Ciclos de release predecibles
El mismo SO y línea de release para toda la gamas de switches
SUMMIT X150 – FRONT AND REAR VIEW
• 8.8 Gbps – 13.6 Gbps de ancho de banda para trama de conmutación, y velocidad de retransmisión de paquetes de Capa 2 de 6.5 Mpps – 10.1 Mpps •Tamaño máximo de paquete de 9,216 bytes (trama Jumbo) • 8 colas/puertos de QoS • 4,094 VLANs (Puerto, IEEE 802.1Q, basadas en MAC) • ACLs basadas en hardware con clasificación de Capa 2 – Capa 4, incluyendo ACL IPv6
TRAINING MADE EXTREME
The Clear Alternative
-Free Content -Online ENA -Sandbox -Certification
Instructor, Student and Lab Guides all available online, free of charge, to enable self-learning
Nominal testing fee for certification either online for ENA or proctored for Extreme Networks Specialist (ENS)
Online Extreme Networks Associate (ENA) training allowing you to learn in a directed manner at the entry level
Freely available (first come, first serve) environment to practice, reserved time available for fee
LOCAL AND REMOTE ACCESS
configure vlan mgmt ipaddress <ipaddress> {<netmask>} Examples: configure vlan mgmt ipaddress 10.0.0.1 255.255.255.0
1- Download the software module from your TFTP server or external compact flash memory card using the following command: download image [[<hostname> | <ipaddress>] <filename> {{vr} <vrname>} | memorycard <filename>] {<partition>} {msm <slotid>} {slot <slotid>} 2 - Activate the installed modular package, if installed on the active partition, using the following command: run update 3 Terminate and restart the processes associated with the software module using one of the following commands: restart process [class <cname> | <name> {msm <slot>}] (modular switches) restart process [class <cname> | <name> {slot <slot>}] (SummitStack)
INSTALATION SSH MODULE - STEPS
REBOOT, SAVE AND RECOVERY
CONFIGURATION
REBOOT, SAVE AND RECOVERY
CONFIGURATION
ACCOUNTS CREATE AND
RECOVERY
BootROM Menu Options
The BootROM of the switch initializes certain important switch variables during
the boot process.
If necessary, the BootROM can be upgraded using TFTP.
For disaster recovery purposes (i.e. in the event the switch does not boot
properly), you can download a rescue image from a TFTP server by entering
the dowload image command from the BootROM menu.
INTRODUCCION TO VLANS
STATIC ROUTES
CONFIGURATION LAYER 1
TEST LAYER 1 AND LAYER 2
LOGS
POE CONFIGURATION AND
VERIFICATION
Here is represented the general command to verify the status of
POE
WORKING WITH PROCESS
ACL AND POLICES
MAKING ACL TEST IN YOUR SWITCH:
Your policy is the next :
entry test{
if{
protocol icmp;
icmp-type echo-request;
ethernet-source-address 1C:75:08:44:70:7E; # You shuld change this
source address
}
then{
deny;
}
}
QoS
