custom application product guide - fleetman · pdf filevarious arm designs are available to...

Custom Application Product Guide

Special “AED” ProductsWe use the acronym “AED” for Application Engineered Design. When a standard unit will not perform in a particular application, a special unit can be designed and built based on the specifi c requirements to satisfactorily perform the job. In some cases it may be as simple as modifying the arms on a standard unit, while most other applications require a complete custom unit designed solely for the application.

Over the years we have been involved in numerous special applications ranging from handling tires to fully automated pallet transfer systems. Cascade is committed to providing solutions for any material handling application. This booklet captures a majority of the custom products we have designed and produced for special applications worldwide.

Please feel free to contact us with any special requests.

5570 Timberlea Blvd. • Mississauga, Ontario L4W 4M6 • Canada800.380.2272 • Tel 905.629.7777 • Fax 905.629.7785

Form 1114412-07/2011-R0Cascade is a registered trademark of Cascade Corporation.© Cascade Corporation 2006. All rights reserved. www.cascorp.com

cascade CANADACustom Application Products

PRODUCT SECTION

Anode Handlers ............................................................................ 1Bale Clamps.................................................................................. 2Bin Dumpers ................................................................................. 3Block Handling .............................................................................. 4Broke Clamps ............................................................................... 5Buckets ......................................................................................... 6Concrete Structure Handlers ........................................................ 7Drum Handling .............................................................................. 8 Fixed Fork Spreaders ................................................................... 9Foam Handling............................................................................ 10Forging Clamps............................................................................11Fork Positioners .......................................................................... 12Forward Dumpers ....................................................................... 13Furnace Chargers ....................................................................... 14Glass Panel Handlers ................................................................. 15Grapple Arm Clamps................................................................... 16Inverta-Push................................................................................ 17Load Extenders ........................................................................... 18Load Stabilizers .......................................................................... 19Load Transfer Systems ............................................................... 20Marble Slab Handlers ................................................................. 21Pipe/Pole Hold Down .................................................................. 22Load Pusher................................................................................ 23Roll Clamps ................................................................................. 24Roll Scoop................................................................................... 25Rotators ...................................................................................... 26Special Applications .................................................................... 27 Stationary Load Inverters ............................................................ 28Stationary Mast Stands ............................................................... 29Tire Handling ............................................................................... 30Train Wheel Handling ................................................................. 31Turnafork Clamps ....................................................................... 32Turnaload Clamps ....................................................................... 33Upending Clamps ....................................................................... 34Wine/Wooden Barrel Handling .................................................... 35

Anode Handler

1.1 Custom Application Products Guide

55C-AED-61981Special Clamp Arm Frame

to grab post of Anode

CFS 90° Rotation

Insulated Arm "Lexan"

Specially designed units to handle a variety of shapes and sizes.

Anode Handler

Custom Application Products Guide 1.2

50D-AED-SP- Arms with 360° continous Rotating Pads- Round Pads with Spikes to handle Anode

180° Forward Tipping Clampwith Flat Pads

Bale Clamps


70D-PBSHigh Profi le Bale Arms48" High x 24" Deep

BCB/BCR/BCS35D-BCBFolding Arm Clamp

140D - PBSIntegral ArmsNo Mounting

200D - PBSBolt-On Arms

Bale Clamps


35D-BCR-60809Two Bale Clamps mounted on

360° Rotating Baseused as a Bale Separator

35D-BCB / BCSBale Clamp with Folding Arms

Special designed Arms are easily foldedinwards by pulling a pin at base

Bale Clamps


Bale Arms (Bat Wings)

Various Arm Designs are available to handle different size Bales.

140D- Centre Arm (Removable)

220D-PBS

Bale Arm Extension Rear

Bale Clamps


Bin Dumpers


- Hydraulic Hold Down mounts in between Forks. - Arm design retains Bin by locking the Bin wall.

50D-RBD-SP- 360° Rotation- Lower Adjustable Forks- Top Arm opens / closes to handle various size Bin heights & widths

Bin Dumpers


Forward Drum DumperSpecially designed to handle Scrap Bins.

Special Hold Down Pad foldsdown over Bin. Pad has meshwith sliding Door. Required bycustomer

Bin Dumpers


Rotator withHold Down &Fixed Side Fork

Rotator with custom Fork Assemblies andHydraulic Hold Down Arm.Designed to empty Bins with Funnel Top.

Hold Down Arm Offset

Bin Dumpers


40D-RBD-SPRotating Bin Dumper designed speciallyfor the Produce Industry to handle Bins

of various Vegetables and Fruits

Block Handling


BSSSingle Block Handler

BSSWith Integral Mounting

BDSDouble Block HandlerIV False Carriage III Front

BDSDouble Block HandlerWith Integral Mounting

Block Handling


Single Block HandlerAdjustable Forks Hydraulic

Double wide Block Handler withRoller design for easy maintenance.

70D-CFSFork Clampwith slip-on Rubber FacePads to handle ConcreteBricks and Pavers.

Broke Clamps


Special Dual Grapple Arm Design

BPR - Broke Clamp Revolving

Broke Clampwith Forward & Backward Tilt

Vertical Broke Clamp

BPV - Broke Clampwith Kicker Arm

Broke Clamp with Pusher

Broke Clamps


Forward Tilting Broke Clamp

50C-BPV Broke Clampwith Vertical Opening Arm

50C-BPCBroke Clamp to handle

"Broke" Paper inPrinting Facilities

Buckets


FHB - Fork Mounted

Rotating Bucket

ITA Mounted Bucket with Grapple.Grapple Arms offer Load Securing feature

15°

35°

Buckets


CHB - Comes with Forward and Backward Tilt

ForwardBackward

-Custom design Bucket with special tilt angle ITA mounted bucket

ITA Mounted Bucket with Grapple

Buckets are custom made to width and tilt angle required.Available as Carriage mount or Fork mounted.

Concrete Structure Handlers


200D-CFS-SPFork Clamp with Slip-OnFree Swivel Pads

Fork Clampwith Slip-On "Brick Pads"for handling Cub of Bricks

MCRConcrete Pipe Handler

Concrete Structure Handlers


70D-MCR 300D-MCR 140D-MCR

300D-MCR 200D-MCR

Flat Arms for Square Concrete Structures

Curved Pads Slip-Onwith locking pin tohandle Round Structures

Drum Handling


50D-DTR-SP- 360° Rotation- Special Arms with Articulating Pads to handle Various Diameter Bins

ArticulatingDrum Arms

CFB c/wArticulatingSlip On Pads

FDD-180°Forward

Drum Dumper

Rotator with special Armsto handle large waste bins.Arms designed to fi t intoside pockets.

Drum Handling


35D-FDD-13AForward Drum Dumper

35D-DTR-SP to handle Two DrumHinged Pads to Hand Various Diameters

50D-DFB-61457

35D-DTR-61531- 360° Rotation- Special large radius Arms- Adjustable Hold Down

Fixed Fork Spreaders


120C-FFS-216Extra Wide Unit

150C-FFSDesigned to fi tShaft Type Carriage

100C-FFS-120Designed to fi t on ITA Class Hook Carriage

100C-FFS Special unit with Load Hold Down

to handle stack of Steel Strips

Fixed Fork Spreaders are designed to stabilize wide loads.•

Must be used in conjunction with Truck Forks.•

Each Unit is designed to fi t a specifi c Truck Carriage.•

Fixed Fork Spreaders


FFS on 50D Clamp

ITA Mounting FFS with Hold Down

FFS on “C” Fork Positionerwith Hold Down

Foam Handling


FMB - Foam Block

15D-FMS-SP

35D - With special tubular designed Arms to handle Foam

Foam Handling


25D

50D - 96” Long 50D - 48” Long

Forging Clamps


30D-FRG

90D-FRG

300D-FRG

90D-FRG

150D-FRG

300D-FRG-61858

Forging Clamps


90D-FRG

150C-FRG-62694 35C-FRG-64000

140D-FRG140D-FRG

50D-FRG-63853

90D-FRG-60869

Fork Positioners


V-Series S/S Frame

120V - FPS

60V - FPS

200D - FPSFork Positionerc/w Pin Mounting

40C-FPS-SP 100C-FPB

150V-FPB

100V-FPS

150J - IFSFork PositionerIntergral Mounting

Fork Positioners


"C" SpreaderHold DownDesigned tohandle stack

of Steel plates

"C" ITA Poles "C" Bob CatMounting

"C" Fork Positioner Hold DownDesigned tohandle stack

of Steel plates

Frame Handler c/w Vertical Fork AdjustmentDesigned to handle Truck Frames

"D" FORK POSITIONER "C" FORK POSITIONER

Forward Dumpers


120° Bin & Drum

35D-CCS90° Forward Tipping

180° - 24 x 48 Flat Pad120° - Multiple Design

35D-FDD - Bin Dumper

Forward Dumpers


FDD - 180°

25D - On Crown 90° Forward180° SST Arms on Crown

Furnace Chargers


BAC - 30

Furnace Chargers


"Chrysler on Yale"

"Chrysler on Clark"No Bucket

Glass Panel Handlers


70D-MCR-SPGlass Handler

100C-MCB-SPGlass Handler

100C-MCHGlass Handler

Glass Panel Handlers


70D-MCR SP • Glass HandlerGlass Adjustable Foot

Grapple Arm Clamps


CBC - 30

70C-GRP-63881

Bale Grapple

Grapple Arm Clamps


Scrap Grapple

100C-GRP-62715

50C-GRP

Inverta Push


45E-IVP

The Inverta Push is a very unique attachment that can clamp, rotate, sideshift, push, pull and stabilize loads.

Each unit is custom designed to suit a specifi c application.

Inverta Push


Load Extenders


30-CLX-26

50-CLX-26

45-CLX

Load Extenders


Load Stabilizers


60-LST c/w LBR

30C-LSB c/w Folding Fork & FoldingStabilizer Pad

Hold Down onIndependent

Fork

Hold Down on70D False Carriage

225-LSB c/w Pin Mounting

60-LSBHold Down Even with Forks

Load Stabilizers


25D - On Crown 90° Forward

Hold Down on Single Double

60-LSB c/w Articulating

Pad

50C-LSB Transformer

Load Stabilizers


Hold DownFolding Fork

120C-LSB-61125

Load Stabilizers


35C-LSB

Side Stabilizer

Chain Drive

Load Transfer Systems


Automated Pallet Dispenser Unit



Automated Pallet Dispenser Unit

Load Transfer Station



Pallet Replacement System220" Long x 50.25" Wide

40A-LTSLoad Transfer Stationfor 40" W x 48" L Pallet

Semi Automated Pallet Transfer



Stationary Stand with Load PushDesigned to push load from Pallet to Pallet.

Stand with Power Pack and single function controls.

Marble Slab Handlers


Traversing

70D-MCBMarble HandlerNon Traversing

70D-MHTDouble Stacked / Finished Marble

Marble HandlerS/S Cross Faceof Carriage


Marble Slab Handlers

165D-MHBSpecial design to

pick up complete load

165D-MHB-61852

Pipe/Pole Hold Down


Specially designed clamping arms mounted on top of carriage. The arms fold down on the pipe/poles to secure and prevent load from rolling off or tipping sideways. When not required, the arm assembly pivots to the full vertical position so the truck can beutilized for typical loads. The hold down arm assembly consists of two sections, the main arm and the inner pad. Two hydraulic functions are required to operate the arm assembly. First function activates the main arm up and down. The second function is required to activate the inner pad which provides the clamping. This arm design offers the most versatility for handling variousdiameters and lengths. This type of attachment can be offered in a few different ways. As with all special application designed units, detailed load information is required to determine the features for each attachment.

1. Complete Carriage with Hold Down Arms

Integral mounting for increased capacity.•

Designed for trucks 8,000 lbs to 36,000 lbs Capacity•

Sideshifting frame and hydraulic fork positioning available. •

Pipe/Pole Hold Down


2. Weld-On Hold Down Arms

The hold down arm assembly only can be offered for fi eld installation. Welding instructions are provided based on truck• carriage details.

Pipe/Pole Hold Down


CUSTOMERCARRIAGE

PIPE HOLD DOWN

CUSTOMER FORKS

3. Hang-On Hold Down Arms

The hold down arm assembly only can be offered for fi eld installation as a hang-on to fi t ITA hook type or shaft type carriages.•

Pipe/Pole Hold Down


80C-PHD-63338

4. Single Function Pivot Arm Design

This design offers a single function hold down arm with a pivoting bar to hold down load.•

Pipe/Pole Hold Down


5. Grapple Type Arm Design

This design offers a single function hold down arm to retain and secure load.•

Pipe/Pole Hold Down


Load Pusher


Bean Pusher with Clamp

Insulation Handler

Pusher with Clamp On Rotator

Load Pusher


Pusher with Vertical Broke Clamp

Pusher & Single/Double

BeanBag

Pusher

PusherSideStabilizer

Roll Clamps


Load / RollTower Clamp 60F - TCS 80F - TCS

25F

Roll Clamps


Single Tower- Adjustable Top Arm

100F-RCQ 4 Roll

Non RotatingSplit

Roll Clamps


25F-TCSTower Roll Clamp

50D-RTR-36/412-Roll Clamp Rotating

45F-RCPSingle Paper Roll Clamp

25D - RCS

60F-TCSTower Roll Clamp

Roll Clamps


80D - UKD 100F - RCQ Roll Guard

80D - RTR 100F - RCQ Roll Scoop

66D -RTR 100F - RCQ Portable Roll Slitter

150F - RCP 25F - RCQ Portable Roll Slitter

Roll Scoop


Rotator with Side Arm

Walkie Modifi ed to handle Roll in bilge position

Roll Scoop


Rotators


120D-RRB-61472Rotator with special

QD Hook Style Mounting

Rotator with Side Stabilizer ForkSide Stabilizer Fork is available

as a Folding or Fixed Design

Rotator with Visibility Hole

Rotator


Special Applications


Drop BottomBox Dumper

Mandrel Clamp

Fork Clamp with special Forks to handle Gypsum Slip on Poly Backs are requiredto protect Gypsum sheets



Bread Tray Handler

200D - Car Handler

35D - Panel "Siemens"

TobaccoSpecial Attachment solely designed for handling Tobacco.



100C-SLP-60024Slope Piler Carriage with 10° of total side tilt.

155C-SLU-61122Slue Carriage with 6° of total in / out tilt



55C-SPC-63696 - Snow Plow Attachment. Also available as a Fork Pocket Mounting.

Various widths & design

Special Lifting Blade Attachmentfor handling Appliances

with "Folded Cap" packaging.

Stationary Load Inverters


SLI with PLC & Photo Eyes

SLI140D Design, PLC & Adjustable Side Arm

SLI - Standard



SLI with Pusher

SLI Pallet RetentionPallet Retention Mechanism retainsTop Pallet when load is inverted.



SLI - Adjustable Side Arm

"Floor Loading" design allows loadingand unloading using Hand Pallet Jack



Most Stationary Load Inverter are custom designed.Many features are available such as:

Fully Automated Controls•

Safety Photo Eyes•

Pallet Retainers•

and Adjustable Pressure Settings•

Stationary Mast Stands


25D - SABc/w Carton Clamp

& Fork Pockets

Stationary Mast Stands


Stationary Pusher

c/w RotatingDrum Arms

Tire Handling


50D-TSH-SPTire Stack Handler

45F - RCPc/w Spray

Metal Pads

50D-BCR-SPTire Clamp

Designed to clamp downand stabilize stack of Tiresfor Load Trailers or Containers

Tire Handling


50D-TIR-6135790° Tire Handler




Slip On Tire Handlers

Tire Handling


Tire Handling


Dedicated Tire Handlers are available for capacities ranging from 6,600 lbs to 33,000 lbs.Tire and Rim combinations

Train Wheel Handling


80 - TWH

100C - TWHSlip-On to Shaft Fork

50D-CFB-61211

Train Wheel Handling


Various designs available to wheel only, wheel axle assembly or complete drive wheel assembly.

Turnafork Clamps


40D - HTS - Hydraulic Turnafork

35D-TMS-61735Manual Turnafork

40D-HTB-61453

Turnaforks with hydraulically actuated Armsoffer the ability to position the Arms in any angle from horizontal to vertical.

Turnafork Clamps


Turnafork Clamps


70D-HTS-62887

70D-HTS is theHeavy Duty version Turnafork.

Custom designed Arms to handlevarious loads such as large Tires.

Turnafork Clamps


Turnaload Clamps


Most Turnaloads are designed to handle a specifi c load.Various Arms and features can be incorperated for any application.

25D-TAL-63378

35D-TAL-62178

70D-TAL-61972

Turnaload Clamps


70D-TAL Double Turnaloadwith Side Stabilizer

Designed to handleseparate loads side by side

TAL c/w "C"-Pusher

Turnaload Clamps


35D-TAL-62431Designed for handling sheets of laminate ranging from 1/16" thick to 16" Thick

50D-TAL-SPDesigned with Articulating Arm

for handling scrap bales at recycling yard

Turnaload Clamps


Turnaload Side/Stabilizer

Turnaload c/w Retaining Lips

Turnaload Clamps


Turnaload c/w One Fixed Arm

Handling stack chairs

Turnaload Clamps


Upending Clamps


50D-FBB-SP

77F-RUP-63593

C6 UpendingRoll Clamp

Upending Roll Clamp

Upending Clamps


50D-MCU-62638

15D-CCU-63258

15D Appliance

Upending Clamps


Special unit that clamps, rotatesand 90° forward tipping action. Also has special long arms witharticulating pads for handlingunique load.

35D-DCU-62416

Upending Clamp


Wine/Wooden Barrel Handling


WBH-A002Wine Barrel Handlerwith Cradle Arm

Offers a unique method of handling wine barrels.Cradle arm assembly pivots 180° and traverses sideways

Wine/Wooden Barrel Handling


WBH-T004Wine Barrel Handlerwith Top Grab Arm

Notes


custom application product guide - fleetman · pdf filevarious arm designs are available to...

Documents