custom millwork & shop services 2 flexible mouldings 24...

1CONTENTS

STAIR PARTS

Custom Millwork & Shop Services 2

Cable Rail 3

Handrails 4

Handrail Fittings & Brackets 6

Shoe Rails & Fillet 7

Newels & Balusters 8

Square Newels & Balusters 9

Iron Balusters 10

Stair Installation Hardware & Accessories 12

Landing Treads & Starting Steps 13

Treads, Tread Caps & Risers 14

INTERIOR PRODUCTSFlexible Mouldings 24

Crown Mouldings 25

Picture Rails & Hanger Hardware 32

Chair Rails 33

Casings 34

Symmetrical Casings 37

Backband 38

Lintel & Bead Sets 39

Crown, Base & Casing Build-Ups 40

Plinths & Rosettes 42

Base Mouldings 43

Base Caps & Panel Mouldings 48

Quarter & Half Rounds, Shoes & Misc 50

Stops & Stools 51

Paneling & Bead Board 52

Wainscot & Panel Build-ups 53

MANTELS

CORBELS 54

Full Mantels 60

Shelf Mantels 62

EXTERIOR PRODUCTSPorch Rail 15

Balusters, Tread, Beaded Ceiling, 16Flooring & Post Caps

Columns & Porch Posts 17

Special Order Columns & Porch Posts 18

Exterior Mouldings 19

Hardwood and Softwood Lumber 21

Plywood and Jamb Stock 23

• PLEASE NOTE •All illustrations are for profile

identification and may not be to scale.

MOULDING INDEX 63

ARCHITECTURAL ADORNMENTS

Corbels 57

Centered Balanced Onlays 58

Asymmetrical & Corner Onlays 59

LUMBER & PLYWOOD

22

Ask a sales representative for information regarding custom moulding manufactured in our shop. Our stock lumber supply can be milled to order. We stock Fir, Hemlock and Poplar (for paint grade) in sizes suitable for mouldings. Other species and sizes of lumber are also available - lead times may vary based on availablity of lumber.

The following lists a few reasons you may choose custom moulding:1 To match the trim on a home built in the late 1800/

early 1900’s. Homes built during this period commonly had mouldings made on site by craftsman using hand moulding planes and chisels.

2 The profile you have chosen is not available in the wood species you prefer.

3 The profile you have chosen is not the right size for your home.

CUSTOM MILLWORK& SHOP SERVICES

CUSTOM PROFILESMILLING AND SHOP WORKPLOWING SANDINGPLANING RIPPINGEDGE EASING OGEE STOOL

With any custom product the price is determined by the species of wood you would like and how much of it you need. Our sales representatives are here to help you with your moulding options. We will need to know:

1 The amount of moulding needed in LINEAL feet2 The preferred species of wood.3 Will you be painting or staining?

You can expect to hear from us regarding pricing within 2 daysManufacturing time varies: 2 days - 2 weeks.

Our stock of knives is growing every day. Ask to see our Custom Profiles Catalog. Custom Hemlock 48” treads and 4000 series newels are also availble to order through our shop.

3CABLE R AIL

Fitting9903W 1/8” Quick-Connect® Fixed Surface Mount. 10% Discount by the case (20 Pcs)

Attaches to the face of the post using lag screws.130 pivoting allows for angled stair terminations.

Tools2972-PKG Rope Wire Cutter - 1/8” max3221-PKG Cable lacing needle3128-PKG Cable release tool5063 16 oz cleaner

Intermediate Posts 7648-SLVR Level picket, Silver7649-SLVR Stair rail picket, Silver7648-BLK Level picket, Black7649-BLK Stair rail picket, Black

Standard Cable Assemblies Includes all you need to install one cable run. 6305-PKG 5’ Cable - 1/8”6310-PKG 10’ Cable - 1/8”6315-PKG 15’ Cable - 1/8”6320-PKG 20’ Cable - 1/8”6325-PKG 25’ Cable - 1/8”6330-PKG 30’ Cable - 1/8”6340-PKG 40’ Cable - 1/8”6350-PKG 50’ Cable - 1/8”

Accessories3210-PKG Protector Sleeve, 10 pcs3792-PKG Beveled washer - 3/8”, 4 pcs3799-PKG Beveled washer - 9/32”, 4 pcs3372-PKG SS Dome Cap, 4 pcs3373-PKG SS Crown Cap, 4 pcs3374-PKG SS Chamfer Cap, 4 pcs

7071-PKG Black Cap, 10 pcs7072-PKG White Cap, 10 pcs7073-PKG Brown Cap, 10 pcs7074-PKG Gray Cap, 10 pcs7075-PKG Bronze Cap, 10 pcs

All Feeney cables and fittings are grade-316 ( Marine Grade) Stainless Steel

4

HemlockPrimed Finger Joint

2 3⁄16 x 1 7⁄8

H 6910 No PlowFJP 6910 SP18 18’

UTILITY R AIL

AlderHemlock

Oak2 1⁄4 x 2 3⁄8

A 6010 No PlowH 6010 No PlowO 6010 No Plow

AlderCherryMapleOak

White Oak2 5⁄8 x 2

A 6910 No PlowA 6910BR Bending RailP 6915 Bending Mould All Alder Rail is Finger Jointed

C 6910 No PlowM 6910 No PlowO 6910 No PlowWO 6910 No Plow

ALL HANDRAILS ARE PLOWED TO ORDER 1- 1/4” STANDARD PLOW

A ALDER

C CHERRY

H HEMLOCK

M MAPLE

O OAK

P POPLAR

WO WHITE OAK

FJP FINGER JOINT PRIMED

KEY

BENDING RAIL AND CUSTOM HANDRAILS AVAILABLE BY SPECIAL ORDER

Oak1 3⁄4 x 1 5⁄8

Hemlock 1 5⁄8 x 1 7⁄16

O 6040O 7023 QuarterturnH 6040

O 6042O 7005 Quarterturn FJP 6042 16’H 6042

Oak2 1⁄4 x 1 1⁄4

Finger JointHemlock

2 1⁄4 x 1 3⁄16

HAND R AIL

5

H 6244

Hemlock 2 7⁄16 x 1 3⁄8

HAND R AIL

FirHemlock

OakWhite Oak

2 5⁄8 x 2 3⁄8

H 6500 No PlowF 6500 No PlowO 6500 No PlowWO 6500 No Plow

AlderHemlock

OakWhite Oak

2 9⁄16 x 2 3⁄8

A 6210 No PlowH 6210 No PlowO 6210 No PlowWO 6210 No Plow

Alder2 9⁄16 x 2 3⁄8

A 6510 No Plow

ALL HANDRAILS ARE PLOWED TO ORDER 1-1/4” AND 1-5/8” STANDARD PLOW

A ALDER

F FIR

H HEMLOCK

O OAK

WO WHITE OAK

KEY

BENDING RAIL AND CUSTOM HANDRAILS AVAILABLE BY SPECIAL ORDER

NEW

NEW

6 R AIL FITTINGS

Shaded fittings are in Inventory

Non-Stock Fittings

For a full selection of fittings that can be special ordered ask at the sales desk or visit:

http://www.fitts.com Typical lead time is 2-5 days

We can arrange to order fittings overnight - shipping, extra

3003 BB Bright Brass (US-3)3003 AB Antique Brass(US-5)3003 SB Satin Black(US-1D)3003 ORB Oil Rubbed Bronze(US-10B)3003 RC Rubbed Copper3003 BC Bright Chrome(US-26)3003 DC Dull Chrome(US-26D)3003 SN Satin NIckel(US-15)

3004 BB Bright Solid Brass(US-3)3004 DC Dull Chrome(US-26D)

*Off set: center of rail screws to wall; screws included.

3002 BB Bright Brass(US-3)3002 AB Antique Brass(US-5)3002 SB Satin Black(US-1D)3002 SN Satin Nickel(US-15)

Off set 25⁄8”Off set 21⁄4” Off set 25⁄8” 3003 LA ORB Oil Rubbed Bronze(US-10B)3003 LA SN Satin Nickel(US-15)

Off set 33⁄8” Long Arm

A ALDER

C CHERRY

H HEMLOCK

M MAPLE

O OAK

KEY

RAIL GOOSENECK2 RISER - NO CAP

LEVELQUARTERTURN

UP EASING90 - DEGREE UP EASING OVER EASING

H6010 HEMLOCK H7099 H7011 H7014 H7012 H7013

06010 OAK O7099 O7011 O7014 O7012 O7013

A6010 ALDER A7099 A7011 A7014 A7012 A7013

M6010 MAPLE M7099 M7011 M7014 M7012 M7013

06210 OAK O7299 O7211 O7214 O7212 O7213

C6910 CHERRY C7999 C7911 C7914 C7912 C7913

06910 OAK O7999 O7911 O7914 O7912 O7913

M6910 MAPLE M7999 M7911 M7914 M7912 M7913

A6910 ALDER A7999 A7911 A7914 A7912 A7913

H6910 HEMLOCK H7999 H7911 H7914 H7912 H7913

TANDEM CAP

OPENING CAP

RETURNED ENDTURN OUTLEFT & RIGHT HAND

HAND R AIL BR ACKETS

7HARDWOOD SHOE R AIL & FILLET

H 6006 1 5⁄8 Plow (fillet included)H 6045 1 1⁄4 Plow (fillet included)

11⁄4 and 15⁄8

SOF T WOOD SHOE R AIL & FILLET

1 5⁄8 Plow

1 3⁄4 Plow O 60061 x 2 3⁄4

FirHemlock

2 3⁄8 x 1 1⁄2

F 6545 No PlowH 6545 No Plow

A ALDER

C CHERRY

F FIR

H HEMLOCK

M MAPLE

O OAK

WO WHITE OAK

KEY

A 6045O 6045WO 6045

11⁄4

F 6050

3⁄8

1 1⁄4

F 6051

3⁄8

1 1⁄2

H 6044 1⁄2” Plow (fillet included)for IRON BALUSTERS

Hemlock 2 1⁄2 x 3⁄4

H 6052A 6052 3⁄8

1⁄2

11⁄4 and 15⁄8

H 6007 P2 1 5⁄8H 6050 1 1⁄4

3⁄8

A 1045 O 1045

5⁄16

1 1⁄4

A 6050C 6050M 6050

O 6050WO 6050

3⁄81 1⁄4

A 6007 P2O 6007 P2

3⁄8

1 5⁄8

3⁄4 x 2 1⁄2

8 NEWELS AND BALUSTERS

FLUTED NEWELS AND BALUSTERS ARE AVAILABLE BY SPECIAL ORDERA ALDER

H HEMLOCK

O OAK

PR PRIMED

KEY

OAKO 49403 1⁄2 x 52

HEMLOCKH 48423 1⁄4 x 60

ALDERA 49153 1⁄2 x 60Including pin

HEMLOCKH 45003 1⁄4 x 48H 45013 1⁄4 x 56

HEMLOCKH 45053 1⁄4 x 60

H 58011 1⁄4 x 36, 42

36” 42”

10 3⁄4”

14 1⁄2”

10 3⁄4”16 3⁄4”

H 58021 5⁄8 x 32, 36, 42

10 3⁄4” 8 3⁄4”

14 1⁄2” 14 1⁄2”

10 3⁄4” 16 3⁄4”

8 3⁄4

32”36” 42”

H 50701 1⁄4 x 36, 42

H 51051 1⁄4 x 36, 42

53⁄4” 71⁄2”

171⁄2” 19”

123⁄4” 91⁄2” 183⁄4” 151⁄2”

36” 42”

36” 42”

PR 50151 1⁄4 x 36, 42

7 3⁄4”

36” 42”

9SQUARE NEWELS & BALUSTERS

MAPLEM 40013 1⁄2 x 56

ALDERA 40013 1⁄2 x 56

CHERRYC 40013 1⁄2 x 56

OAKO 40003 1⁄2 x 48O 4001WO40013 1⁄2 x 56

HEMLOCKH 40003 1⁄4 x 47 3⁄4H 40013 1⁄4 x 59 3⁄4

OAK O 5060 1 1⁄4 x 36, 42

ALDER A 50601 1⁄4 x 36, 42

HEMLOCK H 50601 1⁄4 x 36, 42H 536015⁄8 x 36, 42

PRIMED PR 50601 1⁄4 x 36, 41 PR 53601 5⁄8 x 36, 41

HEMLOCKH 41053 1⁄4 x 59 1⁄2

OAK - Special Order1 1⁄4 x 36, 42

HEMLOCKH 5060 CH1 1⁄4 x 36, 42H 5360 CH1 5⁄8 x 36, 42

Plain Square

ChamferedSquare

POPLARP 50015 1⁄4 x 56

HEMLOCKH 50015 1⁄4 x 56

HEMLOCKH 30915 1⁄4 x 55

PAINT-GRADEPG 30915 1⁄4 x 556 1⁄2”

PYRAMID CAPS

Add a pyramid cap and panel mould to a plain shaft to create a simple box newel.

5 x 5 x 11⁄2

Alder 5” PC 55AOak 5” PC 550 Maple 5” PC 55MCherry 5” PC 55CHemlock 5” PC 55HFir 71⁄4” PC 725F

Box Newels come with interchangeable flat and pyramid caps. Paint grade newels may be partially constructed with MDF

Other species available by special order.

ALDERA 40914 3⁄4 x 55

OAKO 4091WO 40914 3⁄4 x 55

HEMLOCKH 40914 3⁄4 x 55

POPLARP 40914 3⁄4 x 55

PAINT-GRADEPG 40914 3⁄4 x 556 1⁄4”

ALDERA 20913 1⁄2 x 55

OAKO 2091WO20913 1⁄2 x 55

HEMLOCKH 20913 1⁄2 x 55

POPLARP 20913 1⁄2 x 55

PAINT-GRADEPG 20913 1⁄2 x 55

2091 Newel with adjustable length base block

4091 Newels have a hollow (3-5/16”) base and come with a base block

41⁄2”

O OAK

P POPLAR

PG PAINT GRADE

PR PRIMEDWO WHITE OAK

A ALDER

C CHERRY

F FIR

H HEMLOCK

M MAPLE

KEY

NEW

NEW

10 IRON IN STOCK

PITCH SHOEwith Set Screw

PITCH SHOE - 1/2”- SATHOLLOWPITCHSHOE-1/2”- FBMEGAPITCHSAT - 3/4” - SATSQ ORB PITCH - 1/2” - ORB

1/2” ROUND

1/2” SQUARE

1/2” SQUARENEWEL

PLAI

N OR

B - o

il ru

bbed

bro

nze

2 BA

LL O

RB -

oil r

ubbe

d br

onze

1 BA

LL O

RB -

oil r

ubbe

d br

onze

1TW

IST

- sa

tin b

lack

sol

idSA

TINH

OLLO

W1T

W -

satin

bla

ck h

ollo

wHO

LLOW

1TW

IST

- fla

t bla

ck h

ollo

wM

EGA1

TWSA

T -

satin

bla

ck h

ollo

w, 3

/4”

2TW

IST

- sat

in b

lack

sol

idSA

TINH

OLLO

W2T

W -

satin

bla

ck h

ollo

wHO

LLOW

2TW

IST

- fla

t bla

ck h

ollo

wM

EGA2

TWSA

T - s

atin

bla

ck h

ollo

w, 3

/4”

1BAS

KET

- sat

in b

lack

sol

idSA

TINH

OLLO

W1B

A - s

atin

bla

ck h

ollo

wHO

LLOW

1BAS

KET

- fla

t bla

ck h

ollo

w

2BAS

KET

- Sat

in b

lack

sol

idSA

TINH

OLLO

W2B

A - s

atin

bla

ck h

ollo

wHO

LLOW

2BAS

KET

- fla

t bla

ck h

ollo

w

PLAI

N - s

atin

bla

ck s

olid

SATI

NHOL

LOW

- sa

tin b

lack

hol

low

HOLL

OWPL

AIN

- fla

t bla

ck h

ollo

wM

EGA

PLAI

NSAT

- sa

tin b

lack

hol

low,

3/4

”PL

SQU

ARE

ORB

- ORB

hol

low

1 KN

UCKL

E - s

atin

bla

ck

2 KN

UCKL

E - s

atin

bla

ckIron NewelHF.16.5.8SAT1 3⁄16 x 48

Iron Newel Fastening KitHF.16.2.3SAT

FLAT SHOEwith Set Screw

FLATSHOE - 1/2”- SATHOLLOWFLATSHOE -1/2”- FBMEGAFLATSAT - 3/4” - SATSQ ORB FLAT - 1/2” - ORB

ADJUSTABLE KNUCKLEwith Set Screw

KNUCKLE -1/2”- SATHOLLOW KNUCKLE -1/2”- FB

SQ ORB KNUCKLE - 1/2” - ORB

ROUND PITCH SHOEwith Set Screw

PITCHSHOEORB-1/2”

ROUND FLAT SHOEwith Set Screw

FLATSHOEORB-1/2”

11

FI55

21-4

4

FI55

22-4

4

FI55

25-4

4

FI55

26-4

4

SPECIAL ORDER IRON BALUSTERS & NEWELS

NEWELS 1/2” SQUARE

9/16” SQUARE 1/2” ROUND

FI41

11-4

8

FI41

15-4

8

FI41

21-4

8

FI41

41-4

8

FI3400Newel attachment

and shoe

For 1/2” Balusters use:For 1/2” Balusters use:

FOR 9/16” SQUARE USE:

FI3101Shoe

w/set screw

FI3101-2Shoe

w/set screw

FI3102Pitch Shoe

w/set screw

FI3102-2Pitch Shoe

w/set screw

FI3103Adjustable Knuckle

w/set screwFI3101-1-1/4

Flat Shoe

FI3104Shoe

w/set screw

FI3104-2Shoe

w/set screw

FIH5

564-

44

FIH5

563-

44

FIH5

565-

44

FIH5

564-

44

FI55

41-4

4

FI55

40-4

4

FI55

42-4

4

FI55

45-4

4

FI55

71-4

4

FI55

30-4

4

FI55

31-4

4

FI55

32-4

4

FI55

36-4

4

FI55

72-4

4

FI3106Shoe

w/set screw

FI3107Shoe

w/set screw

NEW

NEWFOR 1/2” ROUND USE:

12 STAIR HARDWARE & ACCESSORIES

S 3032 Circ-Runner Rail Bolt Driver

S 3033 Dowel RunnerDowel Screw Driver

L-Bracket Newel FastenerO 3008 31⁄2 ” OAKH 3008 31⁄4 ” HEMLOCKS3009 Newel Fastener (no moulding)

T 92 Rail Bolt Wrench

Additional L-Bracket Mouldings 5⁄8 x 27⁄16

LBM OAK LBM HEMLOCKLBM MAPLELBM ALDER

S 3076 Dowel Screw Lag Screw for Balusters5⁄16 x 27⁄16

MG 6200 Fluted Dowel Pin for Balusters3⁄8 x 2

Round41⁄2 x 3⁄4O 7017 OAKH 7017 HEMLOCK

Oval Wide41⁄2 x 53⁄4 x 3⁄4O 7037 OAK C 7037 CHERRYH 7037 HEMLOCK Oval Narrow39⁄16 x 5 x 3⁄4A 7027 ALDER

WALL ROSETTES

S 3005 Sure-Tite Newel Fastener 1⁄2 x 11(Includes oak and hemlock 11⁄2 ” Plugs )

S 3001 Rail Bolt (3” not to scale)(uses 1” Plugs)

A ALDER

C CHERRY

H HEMLOCK

O OAK

KEY

FACE GRAIN PLUGS

BUTTONS

3⁄8” 1⁄2” 3⁄4” 1” 11⁄2” 3⁄8” 1⁄2” 1”Birch X X X

Oak X X X X X X X X

Maple X X X X

Cherry X X X

Alder X X

Hemlock X X

Fir X X

13L ANDING TRE AD & ACCESSORIES

Single-Ended Starting Step Reversible(Shoe and cove moulding included)*

OAK O 8010 48”

*Curved moulding included with start ing steps does not match stock shoe and cove profiles. Curved moulding kits, as well as 5’ straight lengths of matching moulding,

may be purchased separately.

Other wood species and sizesavailable by special order

A ALDER

C CHERRY

F FIR

H HEMLOCK

O OAK

P POPLAR

WO WHITE OAK

KEY

Tread MouldingsO 601 WO 601C 601 A 601F 3013⁄4 x 3⁄4

H 30111⁄16 x 11⁄16 8’, 10’, 12’

Landing Tread O 987F 9873 1⁄2 x 3⁄4 x 1 1⁄16

Cove MouldingShoe Moulding

Included*

6-1/4”R

48” — Available in 53“ and 60”

8010Starting Step

10-3/8”

7-1/2”

11-1/4”

Landing Tread O 988WO 9885 7⁄16 x 3⁄4 x 1A 988 5 1⁄8 x 3⁄4 x 1

NosingH 98611⁄4 x 1 1⁄16

P 9861 1⁄16 x 2

A 983O 983WO 983F 9861 x 1 1⁄4

STARTING STEPS

NEW

NEW

14

A 8076O 8076

False Riser 8”

6”

A 8071- L.H.A 8071- R.H.O 8071 - L.H.O 8071- R.H.False Tread

with Mitered Return

16”

11” 6”

A 8072O 8072

Wall Capw/nosing and cove

1/2”

TRE ADS & RISERS

TREADS

OAK – O 980, 3⁄4 x 71⁄2 x 42 & 48

Our Oak Risers are made of solid wood.

Hardwood or paint-grade risers may be cut from plywood or 1 x 8 lumber

Winder treads and treads of wider width can be manufactured. Ask the sales desk for pricing and

lead time.

Don’t see what you’re looking for?Ask a salesperson about available options

*1” x 48” Oak treads in inventory with left or right mitered return on nosing for open ended stairs.

*Mitered returns for all treads available (S986RE).

RISERS

TRE AD CAP SYSTEM

Oak & Alder tread caps in stock.All false treads and wall caps are sold with risers.

Treads and risers are MDF ply; nosing is solid wood.Other wood species available by special order.

1 x 11 1⁄2 36” 42” 48” 60” 72” 96”

Red Oak X X* X

White Oak X X

Alder X

CVG Fir (1 x 11 1⁄4) Random Lengths

PG Fir (1 1⁄16 x 111⁄2) X X X X

Particle Board X X X X

SPECIAL ORDER TREAD AND RISERSlead time 1-3 days

1 x 11 1⁄2 36” 42” 48” 60” 72” 96”

Hemlock (11⁄32 x 111⁄2) X X X X X

Jatoba X X X X

White oak X X

White maple X X X X

American cherry X X X X

Hickory X X X X

Alder X X X

A ALDER

O OAK

KEY

NEW

15EXTERIOR PORCH PRODUCTS

F 302

H 322 H 417

Top RailCVG Fir

4 1⁄2 x 1 3⁄4

Fir 2x2

Bottom RailCVG Fir

3 1⁄2 x 1 1⁄2

Fir 1 x 3 Fir 1 x 2

SUGGESTED RAIL CONFIGURATIONS

H 516Fir 2x2

1 1⁄2”

Based on a classic rail design from the early 20th century, our porch system is appropriately scaled and detailed for your home’s exterior. Use the rail alone with 11⁄2” balusters, or combine the versatile top

VINTAGE PORCH RAIL

rail with various panel moulds and fir lumber sizes to create rail profiles from 1 3⁄4” to 3” in height and from plain to ornate in detail. Choose from two baluster sizes (see page 16).

( not to scale )

Fir F 6500

2 5⁄8 x 2 3⁄8

FirF 6545

2 3⁄8 x 1 1⁄2

F FIRKEY

FIRRAIL

FIRSHOE

F 6500

F 6545

16 EXTERIOR PORCH PRODUCTS

F FIR

MG MIXED GRAIN

PG PAINT GRADE

VG VERTICAL GRAIN

KEY

Fir MG Porch Flooring LMG 1x4 T&GFir VG Flooring LF 1x4 T&G 11⁄16 x 3 5⁄16

Beaded Ceiling F 777 9⁄16 x 3 1⁄4 3’, 4’, 5’

Wainscot F 778 13⁄16 x 3 1⁄2

FIR TREAD 1 x 11 1⁄4 Random LengthsPG Fir Stair Tread 1 1⁄16 x 11 1⁄2 3’, 4’, 6’, 8’

BALUSTERS

F 556011⁄2 x 36, 42

F 50601 1⁄4 x 36, 42

FIR POST CAPS

Fir Post CapPC 725 F7 1⁄4 x 7 1⁄4 x 1 1⁄2

3 1⁄8 Face

LF - 3 1⁄8 FaceMG - 3 1⁄16 Face

3 1⁄4 Face

17

PERMAPost ® Made from low maintenance polyethylene with white finish, these porch posts are ready to be primed and painted or can be left with the factory finish.

PP 5x8 Colonial Porch Post 5” x 8’PP5INSTALL 5” installation kit PP 6x8 Colonial Porch Post 6” x 8’ PP6INSTALL 6” installation kit

IN STOCK - COLUMNS AND PORCH POSTS

Post Size

A Structural Load

5” 4” 1,300 lbs6” 5” 5,000 lbs

HB&G PERMACast ® ColumnsRound: A gradual tapering of the upper two-thirds of the column holds true to the classic form offsetting the illusion that the column grows larger as it ascends. Square: Not tapered, can be cut to any height without affecting the fit of the caps and bases.

Columns are made from a fiberglass composite that is:

Cap and Base SetsCB08 8” Round TuscanCB10 10” Round TuscanCB12 12” Round TuscanSCB08 8” Square

Cap and base sets include PERMACast

® Permaflashing, 2 L-brackets and fasteners.

Weather ProofInsect ProofLoad Bearing

Low MaintenanceReady to Prime and PaintLifetime Warrantied

SC88 8”x 8’ Plain Square SC810 8”x10’ Plain Square

RC88 8”x 8’ Plain round columnRC810 8”x 10’ Plain round columnRC1008 10”x 8’ Plain round column RC1010 10”x 10’ Plain round columnRC1208 12”x 8’ Plain round columnRC1210 12”x 10’ Plain round column

A

L

C

B

A

C

A

L

Col. Size A B C L Structural Load

8” sq 8” N/A 11 1⁄8” 10 15⁄16” 10,000 lbs

8” rnd 7 5⁄8” 6 1⁄4” 10 1⁄2” 9 1⁄4” 10,000 lbs

10” rnd 9 5⁄8” 8 1⁄8” 13 1⁄2” 11 1⁄4” 14,000 lbs

12” rnd 11 5⁄8” 9 3⁄8” 16 1⁄2” 13 3⁄4” 18,000 lbs

For a full selection of columns and posts that can be special ordered ask at the sales desk or visit:

www.hbgcolumns.comTypical lead time is 2-6 weeks,

shipping extra

18 SPECIAL ORDER - PORCH PRODUCTS

Round Stock Wood

Columns

Top Rail

Post Caps

Newels

Balusters

Bottom Rail

WWW.HBGCOLUMNS.COM

WWW.HBGCOLUMNS.COM

PermaPorch® Railing Collection

from HB&G ColumnsVirtually

maintenance freepre-finished (paintable)

Easy installationVersatile as lumber

Warranty

PermaCast® ColumnsPermaLite® ColumnsCellular PVC Columns

Wood Columns

SPECIAL ORDER - COLUMNS

Columns can be ordered in just about any combination imaginable - ask a sales rep for information on Round, Square, and Craftsman columns with the

following options:

• Plain• Fluted• Tapered• No-Taper• Recessed Panel• Applied Panel• Pedestal• Barrel

19EXTERIOR MOULDINGS

F 3055⁄8 x 2 9⁄16

H = 1

13⁄16

P = 1 13⁄16

CD CEDAR

F FIR

KEY

F 513 3⁄4 x 4 3⁄16

P = 2 1⁄8

H = 3

5 ⁄8 F 31211⁄16 x 3 5⁄8

H = 3

P = 2

F 54311⁄16 x 3 1⁄4

H = 2

7 ⁄16

P = 2 3⁄16

F 3153⁄4 x 2 5⁄16

P = 1 9⁄16

H = 1

3 ⁄4

F 512 9⁄16 x 3 3⁄16

H = 2

1 ⁄2

P = 2

CD 3115⁄8 x 2 5⁄8

P = 1 3⁄4

H = 2

F 314 3⁄4 x 1 3⁄4

H=1 1 ⁄4

P = 1 1⁄4

F 4751 1⁄4 x 1 5⁄8

20 EXTERIOR MOULDINGS

Shake Mould

Sill

FJP 441 18’ CD 441 Solid CedarCDFJ 4411 3⁄16 x 1 15⁄16

Brick MouldCDFJ 990 1 3⁄8 x 3 1⁄4

Drip Cap

H 442 CD 442 Solid CedarCDFJ 4421 1⁄4 x 2 1⁄4

Shake Mould CDFJ 890 1 1⁄8 x 2 1⁄2

Drip Cap

F 445 1 1⁄4 x 2 1⁄2

CDFJ 8751 1⁄2 x 3 7⁄16

CD CEDAR

CDFJ FINGER JOINT CEDAR

F FIR

H HEMLOCK


KEY

21

HARDWOODRed OakSapwood is white to light brown and the heartwood is a pinkish reddish brown. Similar in appearance to white oak, but with smaller grain rays. Mostly straight-grained, with a coarse texture. True 3⁄4” thickness with 4 square edges. Stocked in: • 1x2, 1x3, 1x4, 1x5, 1x6, 1x8, 1x10, and 1x12.White OakThe sapwood is light-colored and the heartwood is light to dark brown. White oak is mostly straight-grained with a medium to coarse texture, and longer grain rays than red oak. True ¾” thickness with 4 square edges. Stocked in: • 1x4, 1x5, 1x6, and 1x8. (1x2, 1x3, 1x10 and 1x12 available by special order)Eastern Hard MapleCreamy white in color with a fine, uniform texture and generally mixed grain. True ¾” with 4 square edges. Stocked in: • 1x4, 1x5, 1x6, and 1x8.

American CherryRich red to reddish brown. will darken with age and on exposure to light. May contain some creamy white sapwood. Fine uniform, straight grain, satiny, smooth texture. True ¾” with 4 square edges. Stocked in: • 1x4, 1x5, 1x6, and 1x8. (1x2, 1x3, 1x10 and 1x12 available by special order; 10 and 12 edge glued)Clear AlderSuperior Alder, a light brown with a yellow or reddish tinge. Fairly straight-grained with a uniform texture. Occasional pin knots may be present. True ¾” with 4 square edges.

Stocked in: • 1x2, 1x3, 1x4, 1x5, 1x6, 1x8 and 1x10 (1x8 and 10 may be edge glued). (1x12 available by special order) • 5⁄4x4 and 5⁄4x6Knotty AlderLight brown with a yellow or reddish tinge, knots may be of any size and shape, open or closed. Fairly straight-grained with a uniform texture. True ¾” E2E (2 edges square, 2 edges eased) Stocked in: • 1x3, 1x4, 1x5, 1x6 and 1x8 • 5⁄4x4 and 5⁄4x6 ( square edge)PoplarSolid paint grade hardwood. Smooth and even surface that paints out beautifully. True ¾” with 4 square edges. Stocked in: • 1⁄2x6 • 1x2, 1x3, 1x4, 1x5, 1x6, 1x8, 1x10, and 1x12 • 5⁄4x4, 5⁄4x5, 5⁄4x6 and 5⁄4x8

FINISH LUMBER

Sanding, Ripping and Planing to custom thickness available

in all species

SPECIAL ORDER LUMBERHickory, and Western Hard Maple

available in sizes 1x2-1x12.sizes 6+ may be edge glued;

all species clear 1 face and sanded to 100 grit.

22


in all species

SOFTWOODCVG FirThe most popular stain grade softwood. C or better, even, straight, vertical grain that stains beautifully. Reddish in color. Stocked in: • 1⁄2x4 and 1⁄2x6 in ½” thickness with 4 square edges. • 1x2, 1x3, 1x4*, 1x5*, 1x6, 1x8, 1x10, and 1x12 in true ¾” with 4 square edges. *Spec 7’ lengths available for door sides • 2x2, 2x3, 2x4, and 2x6 in 1 ½” thickness with 4 eased edges. • 4x4 in 3½” square with eased edges. • 5⁄4x4, 5⁄4x5, 5⁄4x6, and 5⁄4x8 in 1” thickness with 4 eased edges.Mix Grain FirPrimarily flat grain with some wide vertical grain. Some reddish color as CVG Fir but with a non-uniform grain character that stains beautifully. Very common in older homes where woodwork is stained. True ¾” thickness with 4 square edges. Stocked in: • 1x4*, 1x5*, 1x6, 1x8, 1x10, and 1x12 *Spec 7’ lengths available for door sides.HemlockA close relative of Fir but more yellowish in color. Fine uniform texture and vertical grain pattern, easily obtains a rich finish. Stocked in: • 1⁄2x4 and 1⁄2x6 square edge • 1x2, 1x3*, 1x4*, 1x5**, 1x6, 1x8, 1x10, and 1x12 11⁄16” thickness with 4 eased edges *Spec 7’ and ** Spec 8’ lengths available for door sides • 5⁄4x4, 5⁄4x6 and 5⁄4x8Clear PineSelect kiln dried Ponderosa Pine, uniform grain. honey or straw like in color, finishes beautifully. True ¾” with 4 square edges. Stocked in: • 1x4, 1x5, 1x6, 1x8 • 5⁄4 x4, 5⁄4 x6 (1 1⁄8” thick with square edges)

PRIMEDFinger JointA superior paint grade lumber engineered using interior glue and SumGuard®™ interior primer. It’s true, non-telegraphing nature offers savings in both time and labor. Stocked in: • 1⁄2 x4, 1⁄2 x6 in 7⁄16” thickness with 4 eased edges • 1x2, 1x3, 1x4, 1x5, 1x6, 1x8, 1x10, and 1x12 in 21⁄32” thickness with 4 eased edges • 5⁄4 x4, 5⁄4 x 6, and 5⁄4 x8 in 1” thickness with 4 eased edges

FINISH LUMBER

23


in all species

PLYWOOD

JAMB STOCK

Finger Joint (Radiata Pine)Double dipped exterior primer. This versatile product allows for the decorative option of installing either the smooth face with eased edges or the re-sawn face with square edges. For exterior applications. Stocked in: • 1x2, 1x4, 1x6, 1x8 • 5⁄4x4, 5⁄4x6, 5⁄4x8 and 5⁄4x10 • 2x2, 2x4, 2x6, 2x8 and 2x10

MDF: Domestic LiteAlways straight, engineered, lumber for paint grade interior applications. Stocked in: • 1⁄2x4, 1⁄2x6 and 1⁄2x8 in ½” thickness with 2 eased edges • 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 1x10, and 1x12 in 11⁄16” thickness with 2 eased edges • 5⁄4x4, 5⁄4x6, and 5⁄4x8 in 1” thickness with 2 eased edges

FINISH LUMBER

4’X8’ Sheets • Red Oak: ¼”, ½”, ¾” • White Oak: ¼”, ¾” • Pre-finished Birch 1⁄2”, 3⁄4” • Fir - A1: ¼”, ¾” • Mill Option (Birch, Maple, Cherry or Hickory): ¼”, ½”, ¾” (Domestic) • MDF: 1⁄8”, ¼”, ½”, ¾”

Particle Board Shelving available in 12”, 16”, and 24” width. Shelving brackets also available (SOL4700).

Finger joint JambInterior: JAMBFJP49/16 68 49⁄16” Jamb 6’-8” primed finger joint comboExterior: JAMBFJP69/16 68 69⁄16“ Jamb 6’-8” primed finger joint single rabbet JAMBFJP69/16 80 69⁄16“ Jamb 8’-0” primed finger joint single rabbetHemlock JambInterior: JAMBHEM49/16 68 49⁄16” Jamb 6’-8” hemlock comboExterior: JAMBHEM69/16 68 69⁄16“ Jamb 6’-8” hemlock single rabbet JAMBHEM69/16 80 69⁄16“ Jamb 8’-0” Hemlock single rabbet

NEW

24 FLEXIBLE MOULDINGS

FLEXIBLE MOULDINGPROFILES IN INVENTORY

FJP 441 Brick Mould stocked in 3/0 & 5/0 half round

H 451 Base Shoe (Paint Grade) 12’

O 200 Base Shoe Oak Grain 12’

H 285 Base 12’

H 705 Panel Mould 12’

H 240B Panel Mould 12’

1 x 6 x 8’ and 12’

ALL PROFILES SHOWN IN OUR CATALOG ARE AVAILABLE IN FLEXIBLE MOULDING BY SPECIAL ORDER

Flexible Casings provide simple solutions to all types of curved openings. From Elliptical to Half-round, Eyebrow to Oval, flexible mouldings are available for all stock profiles.

HOW FLEXIBLE IS IT?The flexibility of the moulding pattern depends upon several factors. Pattern size, shape, material type and application all determine the flexibility limits of a given pattern. The smaller the moulding the more flexible it will be. A ½” X ½” Cove Mould will be very flexible and will accommodate most any curvature while a 2-½” X 2-½” Brick Mould will be very stiff and will usually require pre-forming at the factory.

CAN I USE IT OUTSIDE?Yes, flexible moulding is not affected by salt, moisture, heat or extreme cold.

HOW DO I CUT IT?Flexible moulding may be cut using the same tools and equipment and in the same manner as wood.

HOW DO I FASTEN IT?Pre-determine placement and layout prior to fastening moulding into place. Use of non-acetate construction adhesive in addition to nails or screws is recommended due to the flexible nature of the material. Failure to adequately adhere flexible moulding may result in sags between fastening points. All standard methods of fastening work well with flexible moulding.

HOW DO I PAINT IT?Your flexible moulding requires no priming or sanding prior to painting. Painting flexible mouldings prior to installation is not recommended as the paint may crack when the moulding is flexed.

HOW DO I STAIN IT?Staining flexible moulding is similar to staining wood. Most stains work well however, use of a thicker heavily pigmented stain is recommended. Thinner stains may require multiple coats. Staining flexible mouldings prior to installation is not recommended as the stain may crack when the moulding is flexed.

CONVEX CROWN

CONCAVE CROWN

EYEBROW CASING HALF CIRCLE CASING

ELLIPTICAL CASING FULL ROUND CASING

Crown OrientationCeiling

Wall

Run

Rise

Template

Diameter

Radius

Diameter

Radius

Flexible crowns are available to accommodate both convex and concave applications as illustrated. All stock or custom crowns can be made to match any wall radius or curve.

25

P POPLAR


MDF M D FIBERBOARD

KEY

CROWN MOULDINGS

Dentil CrownP 637 CrownP 638 Dentil3⁄4 x 5 1⁄4 H =

3 3 ⁄4

P = 3 3⁄4

FJP 611 16’5⁄8 x 3 3⁄16

P = 2 1⁄4

H = 2

1 ⁄4

MDF 712 16’11⁄16 x 4 1⁄2

H = 3

1 ⁄4

P = 3 3⁄16

F 513 3⁄4 x 4 3⁄16

P = 2 1⁄8

H = 3

5 ⁄8

F 512 9⁄16 x 3 3⁄16

H = 2

1 ⁄2

P = 2

26

F FIR

MDF MD FIBER BOARD

KEY

CROWN MOULDINGS

Ultralite MDFMDF 43 16 ’1 x 6 15⁄16

H = 5

3 ⁄8

P = 4 7⁄16

Ultralite MDF MDF 572 16 ’9⁄16 x 5 1⁄4

P = 3 1⁄8

H = 4

1 ⁄4

H = 3

3 ⁄8

P = 2 1⁄2 P = 2 1⁄2

H = 3

7 ⁄16

H 3131⁄2 x 4 3⁄16

FJP 313 16 ’9⁄16 x 4 3⁄16

27

F FIR

H HEMLOCK

O OAK

FJP PRIMED FINGER JOINT

MDF M D FIBER BOARD

KEY

CROWN MOULDINGS

O 61011⁄16 x 3 7⁄16

P = 2

H = 2

3 ⁄4

H 312 9⁄16 x 3 9⁄16

H = 2

7 ⁄8

P = 2 1⁄8

MDF 312 16’1⁄2 x 3 1⁄4

H = 2

3 ⁄4

P = 1 7⁄8

FJP 312 16 ’9⁄16 x 3 5⁄8

H = 2

7 ⁄8

P = 2 1⁄8

F 31211⁄16 x 3 5⁄8

H = 3

P = 2

H 350 12’1⁄2 x 15⁄8

H = 1

1 ⁄4

P = 1

H 514 12’FJP 514 16’1 3⁄16 x 2 1⁄4

H 516 8’, 10’ 9⁄16 x 1 1⁄4

H 518 8’, 10’ 1⁄2 x 11⁄16

F 918 3⁄8 x 1⁄2

H = 13 ⁄4

O 6089⁄16 x 21⁄4

P = 13⁄8

H 3549⁄16 x 2 1⁄4

H = 1 9⁄16

P = 1 5⁄8

FJP 354 16’1⁄2 x 2 3⁄16

H = 1

7 ⁄8

P = 1 3⁄16

28

CD CEDAR

F FIR

H HEMLOCK

KEY

F 54311⁄16 x 3 1⁄4

H = 2

7 ⁄16

P = 2 3⁄16

H 3111⁄2 x 2 5⁄8

CD 3115⁄8 x 2 5⁄8

H 310 12’1⁄2 x 1 9⁄16

F 314 3⁄4 x 1 3⁄4

H=1 1 ⁄4

P = 1 1⁄4

F 3153⁄4 x 2 5⁄16

P = 1 9⁄16

H = 1

3 ⁄4

CROWN / BED MOULDINGS

P = 1 1⁄2

H = 2

H 311

P = 1 3⁄4

H = 2 H=

1 3 ⁄16

P = 1 1⁄8

H 310

29

P POPAR


MDF M D FIBERBOARD

KEY

FJP 650 16 ’5⁄8 x 5 1⁄4

H = 4

1 ⁄4

P = 3 1⁄8

P 6501 1⁄16 x 5 1⁄4

P = 3 1⁄2

H = 4

1 ⁄16

CROWN / COVE MOULDINGS

MDF 541 16 ’1 3⁄16 x 6 5⁄16

H = 4

1 ⁄2

P = 4 1⁄2

30

FJP 550 16’1 1⁄8 x 5 7⁄16

P = 4

H = 3

13⁄16

CROWN / COVE MOULDINGS

A ALDER

C CHERRY

F FIR

H HEMLOCK

O OAK

WO WHITE OAK


KEY

F 305H 3055⁄8 x 2 9⁄16

H = 1

13⁄16

P = 1 13⁄16

H 3031⁄2 x 1 5⁄8

H = 1

1 ⁄8

P = 1 1⁄8

A 601C 601O 601WO 601

F 3013⁄4 x 3⁄4H 301 8’, 10’, 12’11⁄16 x 11⁄16

O 600H 300 8’, 10’ 12’1⁄2 x 1⁄2

F 3025⁄8 x 1 1⁄8

H 3061⁄2 x 3 3⁄8

FJP 306 16’5⁄8 x 3 1⁄2

H = 2

3 ⁄8

P = 2 3⁄8

H = 2 5⁄8

P = 2 1⁄2

31

F FIR

H HEMLOCK


WO WHITE OAK

KEY

CROWN / SHAKER CROWN MOULDINGS

H 5013⁄4 x 3⁄4

H 5005⁄8 x 5⁄8

FJP 508 16’WO 5083⁄4 x 4 11⁄16

H = 3

1 ⁄2

P = 3 1⁄8 F 501WO 5015⁄8 x 7⁄8

NEW

NEW

NEW

H 506A 506WO 50611⁄16 x 3 1⁄4

H = 2

5 ⁄16

P = 2 5⁄16

FJP 506 16’11⁄16 x 3 3⁄8

H = 2

1 ⁄4

P = 2 1⁄4

P 5073⁄4 x 3 1⁄4 NEW

H = 2 5 ⁄1

6

P = 2 5⁄16

32

F FIR

H HEMLOCK


WO WHITE OAK

KEY

PICTURE R AILS

Picture Hooks and Cord in Stockask a sales person to show you our selections in brass and chrome

F 1016F 1016 SP8 8’3⁄4 x 1 3⁄4

H 10105⁄8 x 1 11⁄16

FJP 1010 16’11⁄16 x 1 11⁄16

FJP TED 16’3⁄4 x 2 1⁄2

F 10133⁄4 x 2 1⁄2

F 1012F 1012 SP8 8’3⁄4 x 2 5⁄8

H 505H 505 SP8 8’WO 5053⁄4 x 2 1⁄4

NEW

33

H HEMLOCK

P POPLAR


KEY

CHAIR R AILS

P 9803⁄4 x 3 1⁄4

H 297 9⁄16 x 3

P 7521 1⁄16 x 5 3⁄8

FJP 715 16’1 3⁄16 x 2 7⁄16

H 495H 495 SP8 8’ Doorside 5⁄8 x 3 1⁄2

P 7491 1⁄16 x 2 3⁄4

FJP 1000 16 ’11⁄16 x 2 9⁄16

H 184 12’11⁄16 x 2 7⁄16

34 CASING

H 356H 356 SP7 7’ Doorside FJP 356 14’5⁄8 x 2 1⁄4

H 190H 190 SP7 7’ DoorsideFJP 190 14 ’5⁄8 x 2 1⁄4

O 115O 115 SP7 7’ Doorside7⁄16 x 2 1⁄4

H 140 F 140 FJP 140 14’H 140 SP7 7’ Doorside 3⁄4 x 2 1⁄2 5⁄8 x 2 1⁄29⁄16 x 2 7⁄16

F FIR

H HEMLOCK

O OAK


MDF MD FIBER BOARD

KEY

FJP 112 14 ’1⁄2 x 1 1⁄2

H 444H 444 SP8 8 ’ DoorsideMDF 444 16’9⁄16 x 3 1⁄8

H 150H 150 SP8 8’ Doorside 9⁄16 x 3 3⁄16

MDF 150 16’11⁄16 x 3 1⁄4

FJP 150 16’9⁄16 x 3 1⁄4

F 150 3⁄4 X 3 1⁄2

FJP 113 16 ’9⁄16 X 3 1⁄4

H 113 H 113 SP8 8’ Doorside9⁄16 X 3 1⁄8

O 134O 134 SP8 8’ Doorside9⁄16 x 3 1⁄4

35CASING

H HEMLOCK


MDF M D FIBERBOARD

KEY

MDF 535 15'11⁄16 x 3 1⁄2

MDF 3122 16’1 x 3 1⁄2

MDF 136 16’1⁄2 x 3 1⁄4

FJP 111 16’13⁄16 x 3 3/16

MDF 411 15’11⁄16 x 3

H 155 H 155 SP8 8’ DoorsideMDF 155 16’3⁄4 x 4 1⁄4

36 CASING

H HEMLOCK

O OAK


MDF M D FIBER BOARD

KEY

H 495H 495 SP8 8’ Doorside5⁄8 x 3 1⁄2

O 157O 157 SP7 7’ Doorside9⁄16 x 2 1⁄4

H 160H 160 SP7 7 ’ Doorside 9⁄16 x 2 1⁄2

H 100 8’, 10’, 12’ H 100 SP7 7 ’ Doorside7⁄16 x 1 1⁄2

H 130H 130 SP7 7 ’ Doorside1⁄2 x 2 3⁄16

MDF 130 16’9⁄16 x 2 1⁄4

O 130O 130 SP7 7 ’ Doorside7⁄16 x 2 1⁄4

H 262H 262 SP7 7 ‘ Doorside1⁄2 x 1 9⁄16

H 265H 265 SP7 7 ’ Doorside5⁄8 x 2 9⁄16

FJP 265 14’5⁄8 x 2 3⁄8

H 110 8’, 10’, 12’H 110 SP7 7 ’ Doorside1⁄2 x 1 1⁄2

MDF 110 16’1⁄2 x 1 5⁄8

MDF 185 16’3⁄4 x 3 1⁄4

MDF 219 16’3⁄4 x 3 3⁄4 NEW

37SYMMETRICAL CASINGS

H HEMLOCK


MDF MD FIBER BOARD

KEY

H 010 MDF 010 16’H 010 SP7 7’ Doorside 11⁄16 x 3 3⁄85⁄8 x 3 5⁄16

FJP 522 16’11⁄16 x 4 1⁄4

MDF 525 8’, 10’11⁄16 x 5 1⁄4

FJP 180 16’5⁄8 x 5 1⁄4

38 BACKBAND

KEYF FIR

H HEMLOCK


H 1025 BackbandH 1025 SP 8’ Doorside1 1⁄8 x 1 5⁄16

3⁄4

1021 Backband on 160 or 1x4 lumber as casing, both pieces miteredat corners

1022 Backband as lintel: with 1x6 head board, 950 parting bead and 1x4 lumber as casing

1023 Backband on moulded casing 155, both pieces mitered at corners

1025 Backband as chair rail: with 1 x 4 lumber, 332 half round and 777 bead board

BACKBAND IDEAST h e v e r s a t i l e b a c k b a n d

H 1022 BackbandH 1022 SP 8’ Doorside FJP 1022 16’1 1⁄8 x 1 5⁄16

3⁄4

F 1023 Backband1 x 1 1⁄8

3⁄4

H 1021 BackbandH 1021 SP8 8’ DoorsideF 1021 FJP 1021 16’1 1⁄16 x 1 1⁄16

3⁄4

39LINTEL & BE AD SETS

F 9101 1⁄4 x 2 1⁄4

A ALDER

F FIR

H HEMLOCK

KA KNOTTY ALDER

O OAK


MDF MD FIBERBOARD

KEY

F 912 1 7⁄16 x 2 3⁄8FJP 912 16’1 1⁄2 x 2 3⁄8

H 5041 7⁄16 x 2 3⁄8FJP 504 16’ 1 7⁄16 x 2 3⁄8

KA 911H 911 FJP 911 16’1 3⁄16 x 2 1⁄4

A 953O 9537⁄16 x 1 3⁄8

H 9537⁄16 x 1 1⁄4FJP 953 16’3⁄8 x 1 5⁄16

F 955FJP 955 16’1⁄2 x 1 1⁄4

F 950FJP 950 16’7⁄16 x 1 1⁄4

H 503FJP 503 16’1⁄2 x 1 1⁄8

F9131 1⁄2 x 3

Architrave/HeaderMDF 5000 16 ’1 3⁄16 x 3 3⁄4

Use with flat or fluted MDF casing for a classic traditional look.

40 CROWN AND BASE BUILD UPS

Lumber (1x4)

Lumber (1x3)

C R O W N A N D B A S E B U I L D U P STraditional homes often require multiple moulding pieces to be ‘built up’. Mix and match our mouldings to create the look you desire - from traditional to modern.

B a s e s a r e t r a d i t i o n a l l y t w o pieces: A base cap or other panel moulding sitting on top of lumber. Choose a larger size lumber to increase the height of the base.

Craftsman crown build up using crown, picture moulding and base for a big impact.

C e i l i n g

Wa

ll Picture Rail 505

Pictur

e Rail

505

Crown 508

Base

295

Cove 501

Base Cap502

41CR AF TSMAN SERIES BUILD UPS

Moulded casing 522

Lumber (commonly 1x5

or 1x6)

Lumber (commonly 1x5

or 1x6)

Lumber (Commonly 1x4 or 1x5)

DOOR & WINDOW CASING BUILD UPSTraditional homes often require multiple moulding pieces to be ‘built up’. Mix and match our mouldings to create the look you desire - from traditional to modern.

T r a d i t i o n a l C r a f t s m a n build up using a lintel on t o p o f l u m b e r , p a r t i n g bead and moulded casing.

Popular Port land Modern C r a f t s m a n b u i l d u p u s i n g l u m b e r , p a r t i n g bead and lumber casing.

Parting bead 953

Parting bead 503

Lintel 504

42

BASEBLKHHemlock radius corner base block For use with full 3/4” 1x6 lumber(Ogee and Colonial radius base

blocks in MDF available by special order.)

PLINTHS & ROSETTES

F FIR

P POPLAR

KEY

Poplar PlinthP 3.5 7⁄8-x 3 1⁄2 x 8

Paint GradeRO 2.5 7⁄8 x 2 1⁄2RO 3.5 7⁄8 x 3 1⁄2RO 3.5 T 1-x 3 1⁄2

RO 5.5 7⁄8-x 5 1⁄2

ROSETTES

PLINTH BLOCKOur Poplar Plinth block material is sold by the half foot to accommodate c a s i n g s o f v a r i o u s w i d t h s .

Poplar Plinth1 1⁄16 x 7 1⁄4

43BASE MOULDINGS

KEY

MDF 414 16’5⁄8 x 5 1⁄4

MDF 412 16’5⁄8 x 4 1⁄4

MDF M D FIBER BOARD

MDF 163 16’ 5⁄8 x 7 1⁄4

MDF 161 16’5⁄8 x 5 1⁄4

44 BASE MOULDINGS

H HEMLOCK


MDF M D FIBER BOARD

KEY

H 155MDF 155 16’3⁄4 x 4 1⁄4

MDF 165 16’11⁄16 x 5 3⁄4

MDF 236 16’1⁄2 x 4 1⁄4

H 2015⁄8 x 5 1⁄4MDF 201 16’5⁄8 x 5 1⁄2

FJP 267 16 ’1⁄2 x 5 3⁄16

45BASE MOULDINGS

H HEMLOCK


MDF M D FIBER BOARD

KEY

MDF 186 16’11⁄16 x 3 1⁄2

H 2081⁄2 x 3 1⁄8FJP 208 16 ’1⁄2 x 3 1⁄16

H 2603⁄8 x 3 1⁄4

MDF 185 16’3⁄4 x 3 1⁄4

MDF 4312 16 ’11⁄16 x 4 7⁄16

FJP 211 16 ’5⁄8 x 4 3⁄16

MDF 119 16’9⁄16 x 4 1⁄2

NEW

46 BASE MOULDINGS

F FIR

H HEMLOCK

O OAK


KEY

H 275 7⁄16 x 3 1⁄4

H 279 7⁄16 x 4 1⁄4

H 166 3⁄8 x 3 1⁄4

O 204 7⁄16 x 3 1⁄4

F 204 5⁄8 x 3 1⁄2

H 270FJP 270 16’ 7⁄16 x 3 1⁄4

H 2507⁄16 x 2 1⁄4

H 230 9⁄16 x 2 3⁄16

47

H HEMLOCK

KA KNOTTY ALDER

O OAK


MDF M D FIBERBOARD

KEY

O 2173⁄8 x 3 1⁄4

O 2257⁄16 x 4 1⁄4

P 280KA 2805⁄8 x 3 1⁄2

H 2809⁄16 x 3 1⁄4FJP 280 16’7⁄16 x 3 1⁄4MDF 280 16’1⁄2 x 3 1⁄4

H 2957⁄16 x 2 1⁄4

P 285 KA 2855⁄8 x 5 1⁄2

H 2859⁄16 x 5 1⁄4FJP 285 16’MDF 285 16’1⁄2 x 5 1⁄4

BASE MOULDINGS

FJP 283 16’3⁄8 x 4 1⁄2

NEWNEW

48 BASE CAPS & PANEL MOULDINGS

O 71111⁄16 x 1 1⁄2H 7115⁄8 x 1 9⁄16

H 7015⁄8 x 1 3⁄8

C 703O 703H 7031⁄2 x 3⁄4

A 705O 705H 7053⁄4 x 1 1⁄8FJP 705 16’11⁄16 x 1 1⁄8

H 240 B11⁄16 x 1 3⁄8

F 47211⁄16 x 1 7⁄8FJP 472 16’11⁄16 x 1 13⁄16

H 5013⁄4 x 3⁄4

H 5005⁄8 x 5⁄8

H 301 (with backout) 8’, 10’, 12’11⁄16 x 11⁄16

H 7063⁄4 x 1 15⁄16

F 4751 1⁄4 x 1 5⁄8

A ALDER

C CHERRY

F FIR

H HEMLOCK

O OAK

WO WHITE OAK


KEY

A 601C 601O 601WO 601F 301 3⁄4 x 3⁄4

O 600H 300 (with backout) 8’, 10’, 12’1⁄2 x 1⁄2

F 501WO 5015⁄8 x 7⁄8

NEW

49BASE CAPS & PANEL MOULDINGS

F 74411⁄16 x 1 7⁄8

H 7405⁄8 x 1 1⁄8

H 516 8’, 10’, 12’ 9⁄16 x 1 1⁄4

H LAMB FJP LAMB 16’5⁄8 x 1 9⁄16

F 10305⁄8 x 1 3⁄4

F 425 3⁄4 x 1 3⁄4

F 3025⁄8 x 1 1⁄8

H 4405⁄8 x 1 1⁄2

P 7101 1⁄16 x 2

H 7045⁄8 x 5⁄8

H 518 8’ 10’1⁄2 x 11⁄16

F FIR

H HEMLOCK

P POPLAR


WO WHITE OAK

KEY

H 502FJP 502 16’WO 5025⁄8 x 1 1⁄2

NEW

50 QUARTER & HALF ROUND, SHOE, ETC...

ShoeA 200C 200M 200

O 200WO 200 1⁄2 x 3⁄4

MISCELL ANEOUS HARDWOOD MOULDINGS

A ALDER

C CHERRY

F FIR

H HEMLOCK

M MAPLE

O OAK

WO WHITE OAK


KEY

3⁄4” QTR Round O 661 H 324 (11⁄16 x 11⁄16) 8, 10, 12F 324 (11⁄16 x 11⁄16)FJP 324 (11⁄16 x 11⁄16) 16’

1 5⁄16” Full Round H 342(closet pole sockets available)

1⁄2” QTR RoundO 662H 322 8’, 10’

1⁄4” QTR RoundH 320 8’

3⁄4” Half RoundH 332 8’

Shoe F 4517⁄16 x 11⁄16

ShoeH 451FJP 451 16’7⁄16 x 11⁄16

Self Edge O 432M 4403⁄8 x 1 1⁄2

BacksplashO 4319⁄16 x 3 3⁄8

ReducerO 8503⁄4 x 2 1⁄4

T MouldO 8593⁄4 x 2

ThresholdO 805M 8053⁄4 x 2 13⁄16

Outside CornerH 382 8’, 10’1 1⁄4 x 1 1⁄4

15⁄16 Hemlock

Outside CornerH 381 8’, 10’0 652 1 1⁄16 x 1 1⁄16

13⁄16”

51STOPS & STOOLS

A ALDER

F FIR

H HEMLOCK

O OAK


KEY

F 888 Ogee Stool15⁄16 x 3 3⁄8

We can run custom stool out of any of our 5/4” stock

H 9471⁄2 x 1⁄2

F 918 3⁄8 x 1⁄2

FJP 410 12’3⁄8 x 1 5⁄8

Square StockH 360 11⁄16 x 11⁄16

Square StockH 3651⁄2 x 3⁄4

F 9511⁄4 x 1⁄2

Screen MouldH 430 8’, 10’O 5201⁄4 x 3⁄4

F 10351⁄2 x 3⁄8

O 1045A 10455⁄16 x 1 1⁄4

H 420FJP 420 12’3⁄8 x 1 5⁄8

F 4171⁄2 x 7⁄8

F 418 1⁄2 x 1 3⁄8

H 4173⁄8 x 3⁄4

H 4183⁄8 x 1 1⁄8

52 BE AD BOARD

From the Victorian era through the 1920’s, tongue and groove bead board was a typical wall treatment in kitchens and baths, as well as a popular ceiling covering.

3 1⁄2 Shaker Peg (half scale)SP

Primed 1⁄4” MDFBEADSHEET4’ x 8’

WainscotCap / BaseFJP 780 16’1 x 1 5⁄8

9⁄16 Wainscot / BackbandFJP 1029 16’1 1⁄8 x 1 7⁄8

1 1⁄16

F FIR

H HEMLOCK

O OAK

P POPLAR


MDF MD FIBER BOARD

KEY

P 7773⁄8 x 3 1⁄4(bead side only)

3” Fa

ce

FLAT

FACE

WITH

EDGE

V

BEAD

ED

FJP 555 16’9⁄16 x 5 3⁄8

5 3 ⁄16”

Face

H 777FJP 777 16’9⁄16 x 3 5⁄16

FLAT

FACE

WITH

EDGE

V

BEAD

ED

3 1 ⁄8” F

ace

F 7783⁄4 x 3 1⁄2

3 1 ⁄4” F

ace

BEAD BY THE 4 x 8 SHEET

OAK, WHITE MAPLE, ALDER,CHERRY AND 1/4” MDF

SPECIAL ORDER BEAD

O 7773⁄8 x 3 1⁄4

BEAD

ED

2 15⁄16

” Fac

e

53WAINSCOT AND PANEL BUILD UPS

Mouldings can be used in single profiles or in combinations to create an infinite variety of effects. Many panel mouldings are applied with plywood to maximize versatility and economy. These are just a few designs that can be purchased and installed today.

Recessed panels - lumber + plywood + panel moudlings

O 711

O 777

O 703

Oak1 x 4

Typical beadboard build up - from floor to cap:

Mix and match your favorite profiles to create the perfect combination.

H 777

H 451

H 332

Hemlock 1 x 4

MDF BEADSHEET

MDF/FJP 1x

Hemlock 1 x 5

H 1022 FJP 780

FJP 780

518

1/4” ply

1/4” ply

1/8” ply

1/8” ply

501 701 240B

703 705 706 704

Hemlock 1 x 4

H 706

P 777

H 701

54 CORBELS

Corbel LB10 1⁄2 x 12 x 1 1⁄2Pine

101⁄2

12

NOT SHOWN TO SCALE

6

8

Corbel CV6 x 8 x 1 1⁄2Pine

2 7⁄8

2 7⁄8

Corbel MS2 7⁄8 x 2 7⁄8 x 1 1⁄2Hemlock

55Corbel-LO-LM-LC

9 1⁄8

11 1⁄8

Corbel LO-OakCorbel LM-Maple9 1⁄8 x 11 1⁄8 x 1 1⁄2

CORBELSNOT SHOWN TO SCALE

3 1⁄4

5 1⁄2

Corbel CJ3 1⁄4 x 5 1⁄2 x 3Poplar

Corbel CO3 1⁄4 x 5 1⁄2 x 3Poplar

3 1⁄4

5 1⁄2

Corbel ML2 7⁄8 x 4 x 3Poplar

2 7⁄8

4

56

Corbel LW10 x 11 x 3Pine

10

11

CORBELSNOT SHOWN TO SCALE

3 1⁄4

5 1⁄2

Corbel CM3 1⁄4 x 5 1⁄2 x 3 Hemlock

2 3⁄4

2 3⁄4

Corbel MC2 3⁄4 x 2 3⁄4 x 1 1⁄2Hemlock

57CORBELS NOT SHOWN TO SCALE

These hand carved corbels and onlays are a stock item available in Linden wood. Also available in White Oak, American Cherry and Maple. Other designs are available.

ARCHITECTUR AL ADORNMENTS

COAR-DA-3065 1⁄2 x 14 5⁄8 x 8

COAR-DA-3052 7⁄8 x 8 1⁄8 x 6

COAR-DA-0394 1⁄2 x 14 1⁄2 x 1 1⁄4

COAR-DA-0623 1⁄2 x 13 1⁄8 x 8 1⁄8

COAR-DA-3035 1⁄2 x 6 1⁄8 x 4 7⁄8

COAR-DA-061L5 1⁄2 x 14 7⁄8 x 7 1⁄8

COAR-DA-302S3 x 6 1⁄2 x 2 1⁄4COAR-DA-302XL5 3⁄4 x 13 x 4 3⁄8

COAR-DA-301L5 3⁄4 x 13 1⁄8 x 4 1⁄2

58 ARCHITECTUR AL ADORNMENTS

CENTERED BALANCED ONLAYSNOT SHOWN TO SCALE


OLCB-GW-05316 x 2 7⁄8 x 5⁄8

OLCB-GW-06220 1⁄2 x 2 7⁄8 x 5⁄8

OLCB-GW-06519 x 3 1⁄8 x 5⁄8

OLCB-GW-175S16 1⁄8 x 4 x 5⁄8

OLCB-GW-175L36 1⁄2 x 7 1⁄2 x 1

OLCB-GW-306L39 x 6 1⁄4 x 7⁄8

OLCB-GW-30824 x 4 1⁄4 x 3⁄4

OLCB-GW-0302L16 x 3 3⁄4 x 5⁄8

OLCB-GW-05117 1⁄4 x 3 3⁄4 x 5⁄8

59ARCHITECTUR AL ADORNMENTS

ONLAYSNOT SHOWN TO SCALE


OLFA-GW-1906 5⁄8 x 14 1⁄4 x 1

OLCR-GW-303Msold in pairs5 3⁄4 x 5 3⁄4 x 5⁄8

OLAS-GW-301Lsold in LH or RH

6 5⁄8 x 16 1⁄4 x 1 OLCP-GW-0285 3⁄4 x 6 3⁄4 x 3⁄8

OLAS-GW-186-LTOLAS-GW-186-RT11 3⁄4 x 6 1⁄4 x 3⁄4

OLCP-GW-0063 1⁄4 x 4 3⁄4 x 3⁄4

OLAS-GW-304S-LTOLAS-GW-304S-RT7 x 3 5⁄8 x 3⁄4

OLCR-GW-307sold in pairs4 1⁄8 x 4 1⁄8 x 3⁄8

OLCB-GW-05912 x 2 3⁄8 x 5⁄8

OLCB-GW-06315 1⁄4 x 3 x 5⁄8

OLMN-GW-046sold in pairs

4 7⁄8 x 3 1⁄4 x 3⁄8

OLMN-GW-001set of 4

2 x 2 x 3⁄8 OLMN-GW-125sold in pairs

4 5⁄8 x 4 5⁄8 x 3⁄8

OLMN-GW-47Lsold in pairs

3 7⁄8 x 3 7⁄8 x 3⁄8

OLMN-GW-47Sset of 4

2 3⁄4 x 2 3⁄4 x 3⁄8 OLMN-GW-043sold in pairs5 x 5 x 1⁄2

OLMN-GW-048Msold in pairs

3 3⁄4 x 3 3⁄4 x 1⁄2 OLMN-GW-048L5 1⁄8 x 5 1⁄8 x 1⁄2

60 MANTELS

ARLINGTON ONLAY

ARLINGTONPaneled alternate

Paint GradeOak

White OakMapleCherry

Mahogany

Paint GradeOak

White OakMapleCherry

Mahogany

The mantels shown here are built to order based on your specifications. Please call for quote. Lead time varies depending on wood species; ask a salesperson about options for wood species not shown.

EMRYCARUTHERSPaint Grade

OakWhite Oak

MapleCherry

Mahogany

Paint GradeOak

MapleCherry

Mahogany

CRAFTSMANPaint Grade

OakWhite Oak

MapleCherry

Mahogany

61

MORELAND

To build your mantel we will need a mantel measurement sheet complete with job site measurements. Printable pdf measurement sheets can be downloaded from our website or obtained at our showroom counter. When measuring for your mantel be sure to

note any size-limiting factors (switch plates, window casings, etc.) We can arrange for a jobsite measure by our sales department.

Custom mantels availableTalk to any of our sales representatives about custom mantel projects.

• Our standard mantels can be modified to fit your wishes. • We can make a replica of a mantel from a photo.

• We can help you design your dream mantel.

OXFORDPaint Grade

OakMapleCherry

Mahogany

Paint GradeOak

MANTELS

ROCKWOODMULHOLLANDPaint Grade Only Paint Grade

OakMapleCherry

Mahogany

62 SHELF MANTELS

IRVINGTON H : 8 ” P: 7 ” Paint Grade, Oak, Maple, Cherry

MAYFIELD H : 5 3⁄4 ” P: 6 1⁄4 ” Paint Grade, Oak, Maple, Cherry

SYLVAN H : 5 1⁄2 ” P: 6 ” Paint Grade, Oak, Maple, Cherry

BELMONT H : 5 1⁄2 ” P: 7 1⁄2 ” Paint Grade, Oak, Maple, Cherry

Our shelf mantels are made to order. Mantel height and shelf projection are given below. Length is per your specification. Most of these mantels can be modified as caps to fit over existing firebox projections. Please call for quote. Lead time varies depending on wood species ordered.

HAWTHORNE H : 15” P: 7” Pa in t Grade , VG F i r

SOMERSET H : 15 3⁄4 ” P: 9 3⁄4 ” Paint Grade, Oak, Maple, Cherry

Stock # Profile Page Stock # Profile Page Stock # Profile Page

63MOULDING INDEX

010varies 37

431 x 615⁄16

26

1007⁄16 x 11⁄2

36

110varies 36

11113⁄16 x 33⁄16

1121⁄2 x 1 1⁄2

35

34

113varies

34

1157⁄16 x 21⁄4

1199⁄16 x 41⁄2

34

45

130varies 36

1349⁄16 x 31⁄4

34

140varies 34

150varies

34

1553⁄4 x 41⁄4 35/44

1579⁄16 x 21⁄4 36

160varies

36

1635⁄8 x 71⁄4

43

16511⁄16 x 53⁄4 44

1663⁄8 x 3 1⁄4 46

1805⁄8 x 5 1⁄4 37

18411⁄16 x 27⁄16

33

1853⁄4 x 31⁄4 36/45

1905⁄8 x 21⁄4 34

2001⁄2 x

3⁄4

201varies

50

44

46

208varies

204varies

45

2671⁄2 x 53⁄16

44

2257⁄16 x 41⁄4

2173⁄8 x 31⁄4

47

47

2309⁄16 x 23⁄16

46

240B11⁄16 x 13⁄8

48

2507⁄16 x 21⁄4

46

2603⁄8 x 31⁄4

45

265varies 36

2707⁄16 x 31⁄4

46

2757⁄16 x 31⁄4

46

2797⁄16 x 41⁄4

46

18611⁄16 x 31⁄2

45

1361⁄2 x 31⁄4 35

2361⁄2 x 41⁄4

44

2621⁄2 x 19⁄16

36

1615⁄8 x 51⁄4

43

280varies

2833⁄8 x 41⁄2

47

47

285varies 47

2957⁄16 x 21⁄4 47

2979⁄16 x 3 33

3001⁄2 x

1⁄2 30/48

2193⁄4 x 23⁄4

36

2115⁄8 x 4 3⁄16

45


64 MOULDING INDEX

312varies

19/27

313varies

26

3143⁄4 x 13⁄4

19/28

3153⁄4 x 2 5⁄16

3201⁄4 x

1⁄450

3221⁄2 x

1⁄250

32411⁄16 x

11⁄1650

3323⁄8 x

3⁄450

3421 5⁄16

50

3501⁄2 x 15⁄8

27

354varies

27

3565⁄8 x 21⁄4

34

36011⁄16 x

11⁄16

3651⁄2 x

3⁄4

51

51

38111⁄16 x 11⁄16

50

38211⁄4 x 11⁄4

50

41111⁄16 x 3

35

4125⁄8 x 4 1⁄4 43

4147⁄16 x 5 1⁄4

43

4173⁄8 x

3⁄4 51

418varies 51

4203⁄8 x 1 5⁄8

51

4253⁄4 x 13⁄4 49

4301⁄4 x

3⁄4

4319⁄16 x 3

3⁄8

51

50

4323⁄8 x 11⁄2

4403⁄8 x 11⁄2

50

4405⁄8 x 11⁄2 49

50

44113⁄16 x 115⁄16

20

44211⁄4 x 21⁄4 20

444varies 34

44511⁄4 x 21⁄2

20

5013⁄4 x

3⁄4

5015⁄8 x

7⁄8

5005⁄8 x

5⁄831/48

5025⁄8 x 11⁄2 49

5031⁄2 x 11⁄8

39/51

504varies 39

5053⁄4 x 21⁄4 32

31/48

31/48

4955⁄8 x 31⁄2

33/36

19/28

311varies 19/28

3055⁄8 x 2 9⁄16

19/30

306varies 30

3101⁄2 x 1 9⁄16

28

4517⁄16 x

11⁄1650

472varies 48

47511⁄4 x 15⁄8

19/48

306

4103⁄8 x 15⁄8

51

3031⁄2 x 15⁄8

30

354

313-

H

301varies 13/30/48

3025⁄8 x 11⁄8

30/49


65

506varies5073⁄4 x 3

1⁄4

31

31

5083⁄4 x 4 11⁄16

5129⁄16 x 3 3⁄16

19/25

51413⁄16 x 21⁄4 27

5133⁄4 x 4 3⁄16

19/25

31

506-H

-MDF

5181⁄2 x

11⁄1627/49

27/495169⁄16 x 11⁄4

MOULDING INDEX

5411 3⁄16 x 6 5⁄16

29

54311⁄16 x 3 1⁄4

19/28

5501 1⁄8 x 5 7⁄16

5729⁄16 x 5 1⁄4

26

6001⁄2 x

1⁄230/48

6013⁄4 x

3⁄413/30/48

61011⁄16 x 37⁄16

27

6089⁄16 x 2 3⁄16

27

6115⁄8 x 3 3⁄16

25

6505⁄8 x 5 1⁄4 29

6501 1⁄16 x 5 1⁄4

29

6613⁄4 x 3⁄4

50

6621⁄2 x 1⁄2 50

7015⁄8 x 13⁄8 48

7031⁄2 x

3⁄448

7045⁄8 x

5⁄849

705varies 48

7063⁄4 x 1 15⁄16

48

711varies 48

7101 1⁄16 x 2 49

71211⁄16 x 4 1⁄2

25

74411⁄16 x 17⁄8

7405⁄8 x 11⁄8

49

75211⁄16 x 53⁄8 33

8593⁄4 x 2 50

5559⁄16 x 5 3⁄8 52

637 & 6383⁄4 x 51⁄4

25

65211⁄16 x 11⁄16

50

49

74911⁄16 x 23⁄4 33

87511⁄2 x 37⁄16

20

53511⁄16 x 31⁄2

35

5201⁄4 x

3⁄451

52211⁄16 x 41⁄4

37

52511⁄16 x 51⁄4

37

777varies777varies

7783⁄4 x 3 1⁄2

16/52

16

52

7801 x 1 5⁄8

52

8503⁄4 x 21⁄4

8053⁄4 x 213⁄16

50

50

30

7151 3⁄16 x 2 7⁄16

33

88815⁄16 x 3 3⁄8 51

89011⁄8 x 21⁄2

20


66 MOULDING INDEX

100011⁄16 x 2 9⁄16

33

1010varies

32

10133⁄4 x 25⁄8

32

10163⁄4 x 13⁄4

32

10123⁄4 x 25⁄8

32

102511⁄8 x 1 5⁄16

38

102211⁄8 x 15⁄16

102311⁄8 x 15⁄16

38

38

102111⁄16 x 11⁄16

38

31221 x 31⁄2 35

500013⁄16 x 33⁄4

43125⁄8 x 47⁄16

39

45

6007 P23⁄8 x 15⁄8

7

7

7

601021⁄4 x 23⁄8 4

6040varies 4

6042varies 4

60453⁄4 x 21⁄4 7

60503⁄8 x 11⁄4

7

60513⁄8 x 11⁄2 7

621025⁄8 x 23⁄8 5

624427⁄16 x 11⁄4

5

650025⁄8 x 23⁄8

651025⁄8 x 23⁄8

5/15

5

65452 3⁄8 x 11⁄2

7/15

6910varies

4

Beadsheet4’ x 8’

52

Fir Rail41⁄2 x 13⁄4 15

604421⁄2 x

3⁄47

600611⁄32 x 23⁄4

600621⁄2 x 11⁄16

60521⁄2 x

3⁄871029

11⁄8 x 17⁄8

10451 1⁄4 x

5⁄16

52

7/51

98731⁄2 x

3⁄4 x 11⁄1613

988varies

13

986varies 13

9831 x 11⁄4 13

9803⁄4 x 31⁄4 33

9551⁄2 x 11⁄4

39

953varies 39

9471⁄2 x

1⁄251

9507⁄16 x 11⁄4

39

9183⁄8 x

1⁄227/51

519511⁄4 x

1⁄2

5110351⁄2 x

3⁄8

10305⁄8 x 19⁄16

49

912varies 39

91113⁄16 x 21⁄4

91311⁄2 x 2

39

39

99013⁄8 x 31⁄4

20

91011⁄4 x 21⁄4

39


67MOULDING INDEX

Fir Shoe31⁄2 x 11⁄2

15 LF1x4T&G11⁄16 x 3 5⁄16

LMG1x4T&G11⁄16 x 3 5⁄16

16

16FJP TED3⁄4 x 21⁄2 32

Poplar Plinth11⁄16 x 71⁄4

42Poplar-

SP31⁄2 52

Lamb5⁄8 x 19⁄16

49

ENVIRONMENTAL COMMITMENT

WE are committed to environmental stewardship and sustainable development. We do not own timberland, are not timber producers and have no logging operations. We are buyers and sellers of forest products and building materials. Therefore we feel a responsibility to the worlds’ forest lands. We are both an environmentally and socially responsible organization that has been specializing in selling quality North American wood products to the Pacific Northwest community since 1946. We pride ourselves on fostering relationships with mills and manufacturers that practice in an environmentally and socially responsible manner.

Our practices reflect the best possible industry standards; this is emportant for our customers, for our communities and for the conservation of our natural resources.

68 NOTES

custom millwork & shop services 2 flexible mouldings 24...

Documents