custom project lifecycle - seadek
TRANSCRIPT
Custom Project LifecycleIt’s never been easier to get your hands on custom SeaDek; although it may take some time. Please refer to the guide below to get a rough idea of the entire custom project process.
Step 1
Check our website for your boat kit (seadek.com ► Shop ► Made to Order ► Find Your
Boat). If you don’t see your boat on our website, please
contact our Customer Advocate Team for availability. If we don’t have your drawing
on file, proceed to Step 2.
SeaDek has an extensive network of Certified Fabricators
and Installers trained to work on custom projects. Please use the Certified Locator Map on our website to find one near you. If unavailable, proceed
to Step 3.
At this point, you will need to purchase a Template Kit from our website and template the boat yourself. Ship templates back (to the address listed in
the bottom right-hand corner) to receive a quote via email.
Please provide payment information at that time.
Once you have submittedyour payment information,
SeaDek will get to work generating your drawing and creating a Dry Fit. Please note
that this may take up to 12 days to complete, and 3-7
days for shipping.
Part #3B i l l Thompson737- 1 84-8309
Part #5B i l l Thompson737- 1 84-8309
31 2 3
Swi tc
h teak
dire
c ti on
en l arge pad by 1 /4”
Add hatch
Please contactour Customer
Advocate Team for more information,
or to begin creating your custom
SeaDek kit today!
Please ship Templatesand Dry Fits to:Attention Scans
851 Greensboro RoadCocoa, FL 32926
[email protected] 321-632-4466
4-047 - Custom Project Lifecycle - Rev B 10-13-2020
Step 3
Check SeaDek.comfor Your Kit
Step 2
Search for a CertifiedFabricator or Installer
TemplateYour Boat
Step 5
Once you receive your DryFit in the mail, either approve your Dry Fit via email or ship
your Dry Fit with drawn revisions to the address in the blue box
to the right. If you approve your Dry Fit, there is no need to
ship it back.
When we receive your Dry Fit with noted changes, we will begin working on a revised
drawing. This process generally takes 5 days. A revised
drawing will be emailed to you for review or you may request to purchase a second Dry Fit.
Once you have approved your Dry Fit or revised drawing, customer service will send your
kit off to production. Please note that our standard
production lead time is 14 days. You will receive an
email upon completion withshipping information.
Step 7
ReceivingYour Dry Fit
Step 6
Revisions(Optional)
Production& Shipping
Step 4
Drawing& Dry Fit