custom solutions catalog€¦ · sphere, cylinder, prism, tints and other prescription enhancements...

Volume 14

Custom Solutions Catalog Prescription Corrected Solutions For Your Most Challenging Patients

Prescription Corrected Eyewear Page 2

Prescription Corrected Filters Page 4

Eschenbach Telescope Mounting Page 7

Designs For Vision Telescope Mounting 0

Eschenbach Optik of America, Inc. 22 Shelter Rock Lane, Danbury, CT 06810

Tel: (800) 487-5389 Fax: (888) 799-7200

2

Tel: (800) 487-5389 Fax: (888) 799-7200 [email protected]

Prescription Corrected Eyewear

Eschenbach will custom correct prismatic or microscopic eyewear for your patients based on their individual needs. Sphere, cylinder, prism, tints and other prescription enhancements are available for your patient solutions. Custom prismatic solutions are available in any of 3 frames: 1681–X Gold half-eye frame, 41mm, Bridge 25mm, Temple 150mm B2204-X Gold full-field frame, 47mm, Bridge 20mm, Temple 140mm B2702-X Pewter full-field frame, 46mm, Bridge 20mm, Temple 145mm Custom corrected prismatic eyewear is available in CR-39 lenses, with or without anti-reflection coating in any of the frames listed above. Custom microscopic solutions feature ClearImageII® lenses from Designs for Vision, Inc. and are available in: DVC-4521-xx-xx Eschenbach uses ClearImageII® lenses from Designs for Vision, Inc. in all of our microscopic solutions. Prescription lens correction as well as lens tinting is available in the ClearImageII® lens itself, and any lens correction as well as frosting or occlusion is available for the balance. LightSpecs are prescription correctable and available in two unisex frame styles. Each pair features 2 LEDs (one on each temple) that are each individually activated and powered by two flat button-sized batteries that last 50 hours! Don’t compromise your patient’s vision. Give them the customized solution they expect and deserve! Questions? Contact Eschenbach or your local Territory Manager at (800) 487-5389.

B2702 Pewter Frame

B2204 Gold Frame

1681-4122S Gold Frame

DVC-4521-xx-xx

ClearImageII® Frame

LightSpecs

FGX-1011356-xxx

3


Prescription Corrected Eyewear Order Form

Account Name: _________________________ Acct # _______ Patient’s Name: _______________________________

Address: _________________________________City: ________________________ State: ______ Zip: ___________ Name of Person Placing Order: _______________________________ Fax: _____________ Phone: _______________ Date: ____/____/____ Email: ______________________________________________________________________

Product # Eschenbach

Premium Prism Eyewear

Eschenbach Microscopic Eyewear New frame number DVC-4521-xx-xx

Eye

OD

OS 1 B-2204-x Gold

B-2702-x Pewter 1681-x Gold Half-Eye

FGX-1011-xxx-xxx (Lindy in Tortoise only)

Tortoise Black

LightSpecs Require ‘edging’

charge. Call for quote

2 A/R Coated? Yes No Lens Material (for LightSpecs only)

Eschenbach Premium

Prismatic is prescription corrected

in CR-39 Lens material (circle specified): Trivex;

Eschenbach Microscopic Eyewear with ClearImageII® lenses are prescription corrected in optical glass one below, CR39 used if nothing is Polycarb; Mid Index; Hi Index

3 Distance Rx: Sphere Cylinder Axis Dist PD OD OS

4 Low Vision Rx desired:

Sphere Cylinder Axis Near PD

OD OS

Other: 5 Please choose one option below:

Quote only Proceed with order

Signature

NOTE: Eschenbach will fax a firm quotation for all orders to the attention of the contact person on the order form. Prices are subject to change. Orders will NOT be processed until confirmation and authorization of the order is provided by the customer via phone (800-487-5389) or return fax. Quotes do not include freight.

For Eschenbach use only

PO: SO: Date:

4


Prescription Corrected Filters (Wellness Protect) In the visible light spectrum, blue light is the high energy, short wavelength light that can easily scatter as it crosses through different media in the eye, thereby causing intra-ocular glare and reduction in contrast (i.e., the ability to separate an object from its background). Eschenbach’s new Wellness Protect Eyewear blocks this bothersome blue light thereby reducing intra-ocular glare, increasing contrast, and improving user’s viewing experience! Wellness Protect Eyewear features yellow lenses that protect the eyes by blocking light 470nm in wavelength and less, cutting out most blue light. In addition, the Wellness Protect Eyewear can be prescription corrected and made in any of the standard filtering tints including orange (525nm), amber (511nm), plum (400nm) or deep red (550nm).

Frame provides side and top protection

Wellness Protect Eyewear features two styles (Original Brown and New Black) in two sizes, each providing protection, comfort and style. The new frames feature adjustable nose pads that allow a better fit to your patient’s faces. The Large Black frame features spring-hinged temples while the Small Black frame includes a gold metal accent around the side shields for additional style. The protection on both styles comes from shields on the top and bottom of the lens as well as from a custom made side shield. Although providing excellent, full coverage, the shields still allow air to circulate freely avoiding the fogging that can occur with more snugly fitting eyewear. And, since it is designed in Germany, the Wellness Protect Eyewear naturally has European style.

All styles have side shields which can be tinted to match lens tint. See next

page for tint options.

Original Brown Frame – comes in Small & Large

Original Brown

Small Black Frame Large Black Frame

5


“Off-the Shelf” options available in 5 tints Most eyewear that blocks 470nm light and less is bright yellow which may minimize its acceptance by users. To alleviate this problem, Eschenbach’s Wellness Protect Eyewear includes one of 5 tints: a light 15% brown/yellow, a dark 65% brown/yellow, a darker 75% brown/yellow (polarized), a darkest 85% brown/yellow, or a gradient that is 50% brown at the top of the lens and decreases to 15% at the bottom of the lens. These tints give users a choice in how much overall light they want to have blocked, and the gradient option provides the ability to block more light looking straight ahead, and less light when looking down.

Other filtering tints also available for custom orders Eschenbach can also make Wellness Protect Eyewear with the popular contrast-enhancing tints found in the Solar Shield® and SolarComfort® lines including yellow (450nm), orange (525nm), amber (511nm), gray (400nm), and plum (400nm). You can also order a custom tint as well. See Order Form for details.

Prescription Correctable Wellness Protect Eyewear is available without tinted lenses so that you can offer a prescription corrected pair to your patients while still getting the benefits of both fashionable frame styles and protective side shields. Questions on prescription correcting the Wellness Protect Eyewear? Call us for a quote!

Light (15% brown)

Dark (65% brown)

Gradient (50% - 15% brown)

Darker (75% brown)

Polarized

Darkest (85% brown)

Gray (400nm)

Yellow (450nm)

Orange (525nm)

Amber (511nm)

Plum (400nm)

Large Brown Frame w/ Side Shields

#1663-5716 (57mm x 16mm)

Small Brown Frame w/ Side Shields

#1663-5416 (54mm x 16mm)

Small Black Frame w/ Side Shields

#1663-5615 (56mm x 15mm)

Large Black Frame w/ Side Shields #1663-5816

(58mm x 16mm)

6


Prescription Corrected Wellness Protect Order Form Account Name: _________________________ Acct # _______ Patient’s Name: ______________________________________ Address: _________________________________City: ________________________ State: ______ Zip: _________________ Name of Person Placing Order: ________________________________ Fax: _________________ Phone: __________________ Date: ____/____/____ Email: _______________________________________________________________

1

Eschenbach Wellness Model Enclosed - OR - Eschenbach to supply (Circle one)

Large Brown Frame - 1663-5716 Small Brown Frame -1663-5416 Large Black Frame - 1663-5816 Small Black Frame -1663-5615 OR My own frame: Color Model

2 3

A) Color of tint requested (circle one below) Wellness (Brown/Yellow) Light (15%) Dark (65%) Darker (75%) *Darkest (85%) Gradient (50/15%)

-OR- B) Please tint as per your SolarShield: Plum Orange Yellow Amber Gray

-OR- C) _________________________________ (Sample enclosed : Yes No)

Description of tint

Percentage of light transmission? __________ (Not necessary if using an Eschenbach tint or enclosing sample)

A) Polarized? Yes ___ No ___ If Yes, select/circle one of the following options: Yellow____ Brown #3____ Gray #3____

B) Anti-reflection coating? Yes ___ No ___

C) Lens material (circle one - CR39 used if nothing is specified) Matching Side Shields? Yes____ No____ *Trivex Polycarb Mid Index Hi Index *(The default lens material for 85% Wellness tint is Trivex)

D) Special Instructions:

4

SPH. CYL. AXIS PRISM BASE Dist. PD*

DIST R *(required) L R L

Add. for Read

Bifocal Style

R Seg. Hgt. Base Curve MRP Near PD L R R R R L

L mm. L L mm.

5

Please chose one option below: Quote only OR Proceed with order

Signature

Fax to: 888-799-7200 or

Email to: [email protected]

NOTE: Prices are subject to change. Orders will NOT be processed until confirmation and authorization of the order is provided by the customer via phone (800-487-5389) or return fax. Quotes do not include freight charges.

Eye Size ______ DBL __________ B __________ ED __________


PO: Date:

7


Eschenbach Telescope Mounting

Mounting Telescopes – General Information Eschenbach will mount telescopic solutions for your patients on a custom basis as discussed below. Practitioners should be advised that incomplete information regarding mounting job specifications could lead to delays in job completion and incorrect mounting. Practitioners are expected to complete the mounting order form fully for all jobs requested. Slight deviations in telescope centering and height should be expected. It is advised, therefore, that the frames selected to carry the mounted telescope be rigid yet adjustable (wire with double bridge, zyl with adjustable nose pads, end pieces that allow pantoscopic and retroscopic angling, etc.) so that final fitting can compensate for slight deviations. Eschenbach’s 1693 frame is ideal as a telescope carrier frame. Eschenbach requires that finished eyewear be submitted with mounting form for all jobs. If you are submitting finished eyewear, you should have all necessary markings intact, carrier lenses in place, and frames comfortably adjusted prior to forwarding to Eschenbach. CR-39 is the lens material of choice for carrier lenses. For bioptic telescope mounting, Eschenbach will mount telescopes no closer than 3mm from the edge of the spectacle frame (or 10mm down from top of lens to center of scope). For proper scope alignment, inclination or declination will be incorporated at 2° per millimeter that the telescope is centered above or below the distance pupil as marked. Should you have any questions, contact Eschenbach or your local Territory Manager at (800) 487-5389.

Binocularly mounted 1673 telescopes

in full diameter positioning

Monocularly mounted 1673 telescope in full

diameter position with reading cap

Monocularly mounted 1623 telescope in

full diameter position

Monocular telescope mounted bioptically in superior position

Monocular Telescope

Mounted in Inferior position

8


Eschenbach Telescope Mounting Instructions For Measuring And Marking For Custom-Mounted Telescopes

1. Binocular telescope mounting for distance – Measure distance monocular pupillary distances for each

eye – Using a lens marking pen/pencil, dot the pupils of each

eye at distance gaze (Major Reference Point – “MRP”) – Determine height at which telescope will be mounted in

the spectacles, measuring from the bottom edge of the lens to the center of the telescope (bioptic superior, full diameter, bioptic inferior). If not specified, Eschenbach will mount as high in the spectacle lens as possible.

2. Binocular telescope mounting for near – Measure distance monocular pupillary distances for each

eye. – Using a lens marking pen/pencil, dot the pupils of each

eye at distance gaze (MRP). – Measure the distance from the spectacle lens to the object

to be viewed at eye level. – Measure the linear distance from the spectacle lens to the

object to be viewed in the position the object is viewed. – Where possible, using a lens marking pen/pencil, dot the

near pupils of the user when viewing the object. To properly mark these pupils, the dispenser should position his/her eye in the user’s line of sight at the object level, looking up at spectacles of the wearer.

– To properly mark these pupils, the dispenser should place loose-leaf reinforcements/leaf rings or other removable adhesive rings over the near pupil markings to ensure that the patient is viewing the near point object through the center of the holes binocularly. 3. Monocular telescope mounting for distance – Measure distance monocular pupillary distance for the eye over which the telescope will be mounted. – Using a lens marking pen/pencil, dot the pupil of the eye over which the telescope will be mounted, at distance gaze (MRP). – Determine the height at which the telescope will be

mounted in the spectacles, measuring from the bottom edge of the lens to the center of the telescope (bioptic superior, full diameter, bioptic inferior). If not specified, Eschenbach will mount as high in the spectacle lens as possible.

1622-5 2.5x Galilean Telescope

1693 Frame

1673 Keplerian Telescopes

9


Eschenbach Telescope Mounting Order Form

Account Name: _________________________ Acct # _______ Patient’s Name: ______________________________ Address: _________________________________City: ________________________ State: ______ Zip: __________ Name of Person Placing Order: ________________________________ Fax: _________________ Phone: __________________ Date: ____/____/____ Email:_______________________________________________________________________

1 Eschenbach Telescope Model # Enclosed OR Eschenbach to supply (Please circle one of the above)

2

Telescope in which eye: (circle) OD OS OU

3

Mounting Position: (circle)

Full diameter OR Superior Bioptic (on center, aim straight) Inferior Bioptic

4

On Full diameter TS: Please consider scope may partially occlude a portion of bifocal SPH. CYL. AXIS PRISM BASE Dist. PD*


Add. for Read

Bifocal Style


L mm. L L mm.

Carrier Lens: Plano unless specified [*CR-39 used Please circle if desired*: Anti-reflection Coating: Yes_____ No____ if nothing is specified] Trivex Polycarb Mid Index 1.60 1.67 Transition III Lenses? Yes ___ No___ If yes, circle Brown or Gray. Special Instructions:

Telescope Rx: OD: _____________________________ OS: _____________________________

5

Frame from Eschenbach #1693 – Matte Silver (circle) All sizes are supplied with 150mm temples. You can reduce them to 135mm by bending. 49-16 52-18 51-16

Other (Enclose other frame with order if desired) Frame Name: _________________________________________ Color: __________________ Size: _____________

6

7 Accessories: Reading Cap Power: ______________________

8

Please let us know the end use for this telescope mounting - Optional, but will help lab evaluate job:

9

Please chose one option: Quote only Proceed with order

Signature

Fax to: 888-799-7200 or Email: [email protected]

NOTE: Prices are subject to change. Orders will NOT be processed until confirmation and authorization of the order is provided by the customer via phone (800-487-5389) or return fax. Quotes do not include freight.

A/R Coating on telescope Rx? Yes No (Circle one)

We can also Rx the telescopic systems below:

1634-xx, 1636-xx

*Pupil Center Height: R_______ L_______ *Monocular Dist. PD: R_______ L_______

*Required fields


PO: SO: Date:

10


Designs for Vision Telescope Mounting

Mounting Telescopes - General Information

Designs for Vision Full Diameter, Bio I and Bio II Galilean Telescopes Designs for Vision Bioptic Telescopes are generally mounted in the carrier lens so that the optic center of the ocular lens is 11mm below the top of the carrier lens. They are laterally decentered to the patient’s PD and have a standard drilling angle of inclination of 20º upward from the horizontal plane. Any position or angle, however, can be special-ordered. Bioptics can be ordered in clear, beige or black housing - this must be specified on the order blank. When using a bifocal carrier lens, care must be taken in the placement of the bifocal segment. This is not as important if the patient is going to be using only the telescope and the bifocal segment, but if the patient is to be able to see at a distance through the carrier lens, at least 8 - 10mm should be available between the telescope and the top of the bifocal. Thus, a frame with adequate vertical dimension must be chosen for the patient. The Eschenbach #1693 frame is ideally suited for this purpose. When binocular telescopes are prescribed, a reading cap may be used only monocularly, since the telescopes will not be aligned for the near working distance. The cap is generally placed over the eye with the better acuity, or in the case of equal acuities, over the dominant eye. Designs for Vision Spiral Galilean Telescopes The Spiral Galilean Telescope was designed to provide focusability in a Galilean Telescope. The ability to focus these telescopes without the need of reading caps provides a flexibility in Galilean design not previously available. All of the Spiral Galilean Telescopes allow the patient to focus from a near point of 12 inches to infinity. Fitting All of the Spiral Galilean Telescopes can be fitted in either the full diameter on center position or in the bioptic position mounted as high as possible above the geometric center of the frame. As the diameter of the eye pieces of the Spiral Galilean Telescopes differ, height placement of the system selected, e.g., 2.2X, 3.0X or 4.0X must be checked by the doctor with the individual patient. The patient’s distance prescription can be incorporated into either the telescope, the carrier lens, or both. For best results, it is recommended that this be done. It should also be noted that a bifocal carrier lens can be prescribed for the patient. The telescopic units can be supplied with either a clear, black, or beige colored housing. For patients with a glare or light sensitivity problem, a tint may also be incorporated into the carrier, the telescope, or both.

DVI Telescope Kit

DVI Full Diameter Telescope

DVI Spiral Galilean Telescope

Example of a Telescope Mounted Bioptically

11


Designs for Vision Telescope Mounting Order Form

Account Name: _________________________ Acct # _______ Patient’s Name: ______________________________________

Address: _________________________________City: ________________________ State: ______ Zip: _________________ Name of Person Placing Order: _________________________________ Fax: _________________ Phone: ________________ Date: ____/____/____ Email Address:________________________________________________________________________

1

Magnification, Telescope Type: (circle)

Fixed Focus (circle) Adjustable Focus (circle) 2.2X Full Diameter 2.2X Galilean Spiral

2.2X Bioptic Model I 3.0X Galilean Spiral

2.2X Bioptic Model II 4.0X Galilean Spiral

2

Housing Color: (circle) Beige [Beige housing matches the color of the Eschenbach #1693 matte silver frame] Black

3

Telescope in which eye: (circle) Binocular Dist. PD: OD OS OU OR *Monocular Dist. PD: R _ L (*Required Field)

4

Mounting Position: (circle) Full Diameter Bioptic (on center, aim straight) (11mm down from top, angled up)

5

On Full diameter TS: Bifocal not available.

Please circle if desired*: Anti-reflection Coating? Yes____ No ____ Carrier Lens is Plano unless specified. Polycarb – Trivex – Hi Index Transition III lenses: check one color: Gray ______ Brown ______ Special Instructions:

SPH. CYL. AXIS PRISM BASE Dist. PD*


Add. For Read

Bifocal Style


L mm. L L mm.

FORM CONTINUES ON NEXT PAGE


PO: SO: Date:

Reverse Telescope: Available in Black

only

12


Designs for Vision Telescope Mounting Order Form (cont.)

6

Telescope Rx: OD: OS:

7

Frame from Eschenbach #1693 - Matte Silver (Circle) All sizes are supplied with 150mm temples. You can reduce them to 135mm by bending. 49-16 51-16 52-18 Other (Enclose other frame with order if desired) Frame Name: Color: Size:

8

Accessories: Reading Cap Power:

9

Additional Comments:

10 Please let us know the end use for this telescope mounting - Optional, but will help lab evaluate job:

11

Please choose one option below:

Quote only Proceed with order

Signature Fax BOTH PAGES to: (888) 799-7200 Questions? Call us at (800) 487-5389 OR Email: [email protected] NOTE: Eschenbach will fax a firm quotation for all orders to the attention of the contact person on the order form. Prices are subject to change. Orders will NOT be processed until confirmation and authorization of the order is provided by the customer via phone (800-487-5389) or return fax. Quotes do not include freight.

Reverse Telescope? Yes____ No____

custom solutions catalog€¦ · sphere, cylinder, prism, tints and other prescription enhancements...

Documents