customer assistance online: lutron.com/help dvrp-253p ctrp-253p dvscrp-253p voltage 120 v 120 v 120...
TRANSCRIPT
LED Control SolutionsSmooth, flicker-free dimming for every application
lutron.comLutron Electronics Co., Inc., 7200 Suter Road, Coopersburg, PA 18036-1299
Customer AssistanceOnline: lutron.com/help Email: [email protected] Phone: 1.844.LUTRON1 (588.7661) — includes 24/7 technical support
Lutron, C·L, Nova T *, Maestro, Diva, Skylark Contour, Skylark, Ariadni, and Caséta are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries. GRAFIK T is a trademark of Lutron Electronics Co.
© 10/2017 Lutron Electronics Co., Inc. I P/N 367-2732 REV B
2 | Lutron
Dimmers
3 C•L dimmers
9 Reverse phase dimmers
11 Phase select dimmers
13 Dimmer capabilities
15 0–10 V dimmers
Bulbs & Sensors
21 Testing LED bulb Performance
25 In-wall sensors
Table of Contents
What sets Lutron apart from the restThis guide covers our extensive line of reliable LED controls and the
features that make them stand out from the rest. Whether your job
requires a dimmer, sensor, or both, you can count on the Lutron
difference to give your customers the best LED control experience.
THE LUTRON DIFFERENCE
Satin Colors**
Hot (HT)
Merlot (MR)
Plum (PL)
Turquoise (TQ)
Sea Glass (SG)
Taupe (TP)
Eggshell (ES)
Biscuit (BI)
Snow (SW)
Palladium (PD)
Midnight (MN)
Sienna (SI)
Terracotta (TC)
Greenbriar (GB)
Bluestone (BG)
Mocha Stone (MS)
Goldstone (GS)
Desert Stone (DS)
Stone (ST)
Limestone (LS)
Gloss Colors**
White (WH)†
Ivory (IV) †
Almond (AL) †
Light Almond (LA)
Gray (GR)
Brown (BR)
Black (BL) †
Architectural Metals (GRAFIK T only)
Satin Brass (SB)
Bright Brass (BB)
Bright Chrome (BC)
Satin Chrome (SC)
Satin Nickel (SN)
Bright Nickel (BN)
Architectural Matte (GRAFIK T and Nova T* only)
White (WH)
Beige (BE)
Ivory (IV)
Almond (AL)
Light Almond (LA)
Gray (GR)
Taupe (TP)
Sienna (SI)
Brown (BR)
Black (BL)
Glass(GRAFIK T only)
Clear Glass (CWH)
* Not available for GRAFIK T** For full availability by product refer to
our catalog† Available colors for Caséta Wireless
C•L dimmers are forward phase dimmers specifically designed for controlling dimmable LEDs, incandescent, and halogen bulbs. They’re the result of our commitment to providing the best LED dimming experience to our customers. Part of that commitment also includes working with bulb manufacturers to find and test bulbs that work well with C•L dimmers through our LED Control Center of Excellence (see page 21 for more information).
C•L Dimmers
3 | Lutron
4 | Lutron
THE LUTRON DIFFERENCE
150 W of LED/600 W of incandescent / halogen
A standard LED is 9 W. With a 150 W dimmer, you can dim 16 bulbs on a single dimmer. Most homes have 22 switches and about 50 to 60 bulbs, so you probably won’t need more than 150 W of LED dimming on any one circuit. (If you do, Lutron has a 250 W C•L model that can dim 27 bulbs at 9 W.)
=
1 – 150 W C•L DIMMER
=
1 – 250 W C•L DIMMER
LED CFL Incandescent / Halogen
C•L dimmers can dim these loads
Works with these bulb types:
Dimmable LEDs, dimmable CFLs, incandescent, and
halogen bulbs. You can also mix bulb types with C•L
dimmers — something you can’t do with other dimmers.
5 | Lutron
Eliminate dimmer interaction
This is a common problem that occurs in a home with multiple dimmers. When you adjust one of the dimmers, the lights in the other room(s) with dimmers flicker.
C•L Dimmers
Non C•L dimmersLights in dining room can flicker when dimmer in kitchen is adjusted
XC•L dimmersAlleviate dimmer interaction for smooth, flicker-free dimming ü
THE LUTRON DIFFERENCE
6 | Lutron
With C•L dimmers, there is no neutral required
Easily set the low-end trim
Optimizing the dimmer’s low end is easy. Simply adjust the lever on the side or through button-press programming (for digital dimmers).
Work with all wire temperature ratingsC • L dimmers don’t require 75° C wire to operate,
unlike some other dimmers.
50%Homes built before 1980
Temp rating: 60° C – 75° C
50%Homes built after 1980
Temp rating: 75° C
X
THE LUTRON DIFFERENCE
7 | Lutron
Diva Maestro Skylark Contour Skylark
150 W 250 W 150 W 150 W 150 W 150 W
Model numberDVCL-153P DVCL-253P MACL-153M CTCL-153P CTCL-150 SCL-153P
DVSCCL-153P DVSCCL-253P
Voltage 120 V 120 V 120 V 120 V 120 V 120 V
Single pole • • • • • •
3-way • • • • •
Multi-location* •
600 W inc / halogen150 W LED / CFL
• • • • •
600 W inc / halogen 250 W LED / CFL
•
Prevents dimmer interaction
• • • • • •
Low-end trim • • • • • •
Mixed loads • • • • • •
C•L Dimmers
Po
le/
Wir
ing
Max
imum
C
apac
ity
*Dim from up to 10 locations
8 | Lutron
Ariadni Nova T* GRAFIK T Maestro Sensor
150 W 250 W 250 W 150 W 250 W 150 W
Model numberAYCL-153P AYCL-253P NTCL-250 GT-150 GT-250M MSCL-OP153M
Voltage 120 V 120 V 120 V 120 V 120 V 120 V
Single pole • • • • • •
3-way • • • •
Multi-location* • •
600 W inc / halogen150 W LED / CFL
• • •
600 W inc / halogen 250 W LED / CFL*
• • •
Prevents dimmer interaction
• • • • • •
Low-end trim • • • • • •
Mixed loads • • • • • •
Po
le/
Wir
ing
Max
imum
C
apac
ity
Reverse phase dimmers control dimmable LEDs and CFLs, as well as
incandescent, halogen, and ELV loads.
Reverse Phase Dimmers
Reverse Phase Control9 | Lutron
10 | Lutron
Nova T* Diva Skylark Contour
250 W 250 W 250 W
Model numberNTRP-250 DVRP-253P CTRP-253P
DVSCRP-253P
Voltage 120 V 120 V 120 V
Single pole • • •
3-way • •
250 W LED / CFL 500 W Inc./Hal./ELV
• • •
Po
le/
Wir
ing
Max
imum
C
apac
ity
Reverse phase dimmers require a neutral and do not have low-end trim.
CanTrackLED CFL
Works with these loads
Incandescent / Halogen
Electronic low-voltage
You can program phase select dimmers to work in either forward or reverse phase,
for optimal performance. They were specifically designed for the pro and control
dimmable LEDs and CFLs, as well as incandescent, halogen, and ELV loads.
Phase Select Dimmers
11 | Lutron
12 | Lutron
GRAFIK T Caséta
250 W 250 W
Model number GT-5NEM PD-5NE
Voltage 120 V 120 V
Single pole • •
3-way • •*
Multi-location • •*
250 W LED / CFL 400 VA MLV500 W Inc. / Hal./ELV
• •
Phase select dimmers require a neutral and have low-end trim.
Po
le/
Wir
ing
Max
imum
C
apac
ity
*3-way dimming requires a Pico.
Works with these loads
CanTrackLED CFL Incandescent / Halogen
Electronic low-voltage
Dimmer Capabilities
LED bulbsNo dimmer currently on the market is designed to work with all LED bulbs. That’s why Lutron is committed to testing LED bulb and dimmer performance through its LED Control Center of Excellence.
LED
13 | Lutron
14 | Lutron
Comparing Dimmer CapabilitiesThe chart below compares the three dimmer types we just covered, as well as “universal” dimmers from others.
Lutron C•L
Lutron Reverse Phase
Lutron Phase Select
Universal by others
Requires a neutral wire No Yes Yes Depends on the product
Forward / Reverse phase Forward Reverse Either Depends on the product
Prevents dimmer interaction Yes No Yes No
Low-end calibration Easy No Easy Difficult
Easy to select phase Forward only Reverse only Easy You may not have an option
Allows mixed loads Yes No Yes No
0-10V dimmers have two separate communication wires that send a signal to the
fixture indicating the light level that needs to be achieved. These dimmers, which
require a 0-10V ballast or driver, are used extensively in commercial buildings.
0–10 V Dimmers
15 | Lutron
16 | Lutron
Pendant Troffer Recessed Fixture
How is a 0–10 V dimmer different from other dimmers?
It has additional wires that communicate with the fixture by sending signals between 0 volts and 10 volts.
These signals correlate to a brightness level for the fixture.
Works with these loadsA 0-10V ballast or driver
Black
Ground
Line / Hot
120–277 V~ 50 / 60 Hz
RedSwitched Hot
Purple (+)
Gray (-) 0–10 V-
Ballast / Driver
Red / WhiteTo 3-way connection
Communication wires
0-10V fixtures require separate low-voltage wiring connected to the dimmer (separate from the power) to dim
17 | Lutron
Patented technology extends relay life more than 10 years
No derating for 277V installations
Low- and high-end trim in one product
Diva 0-10 V
Spec grade with heavy-duty components for surge protection and long life
No derating for 277V installations
Low- and high-end trim in one product
Nova T * 0-10 V
NONEUTRAL REQUIRED
NONEUTRAL REQUIRED
THE LUTRON DIFFERENCE
18 | Lutron
Miswire and load incompatibility alert
Lens will flash red if control is miswired or connected to an incompatible fixture
Optimized dimmer performance with selectable dimming curve and smooth fade to on and off
Maestro 0-10 V dimmer sensor
Lutron’s XCT sensing technology
Smart ambient light detection learns user’s preferred light level and keeps lights off when sufficient daylight is available
Lutron’s Adaptive Zero-Cross Switching extends relay lifetime
NEUTRAL OPTIONAL
THE LUTRON DIFFERENCE
19 | Lutron
Diva Nova T* Maestro
Model number DVSTV DVTV* NTSTV MS-Z101
Voltage 120 V - 277 V 120 V - 277 V 120 V - 277 V 120 V - 277 V
Single pole • • • •
3-way • • •
8A • • •
16A* • •
Po
le/
Wir
ing
Max
imum
C
apac
ity
*Requires an external powerpack
We test bulbs on an ongoing basis for performance with our dimmers, and receive hundreds of test
requests annually. Through our LED Control Center of Excellence, we test each bulb across multiple
parameters before listing it as compatible.
Testing LED Bulb Performance
21 | Lutron
22 | Lutron
We first test bulbs for UL safety. A bulb must pass this test in order to move on to performance testing.
Each bulb is then tested for:
Minimum and maximum load Flicker/shimmer
Buzzing/audible noise Stability from line noise
Start-up time Electrical properties
Bulb manufacturers
Here are just some of the many bulb manufacturers that participate in Lutron’s compatibility testing:
23 | Lutron
LED compatibility tool
Easily find an LED bulb for a C•L dimmer or a C•L dimmer for an LED bulb lutron.com/bulbselector
Once a bulb is deemed compatible we add it to our LED tools:
24 | Lutron
LED product selector tool
• Detailed results of fixture / bulb performance for dimming controls
• Ideal for specification lutron.com/ledtool
In-Wall SensorsLutron occupancy / vacancy sensors are engineered with robust components,
combined with an award-winning design.
25 | Lutron
26 | Lutron
Tamper-resistant lens
Extended relay lifetime (250,000 on / off switch cycles)
Any voltage, any phase(120 V-only sensors also available)
Ambient light detection(set to learnable or fixed)
Available in 27 colors
Electronic low-voltage
Fluorescent / LED
Low-voltage LED
CFL Incandescent / Halogen
Magnetic low-voltage
LED
Works with all lighting loads
THE LUTRON DIFFERENCE
27 | Lutron
Major motion coverage
Minor motioncoverage
Coverage patterns
PIR beam diagram (for reference only)
Ultrasonic coverage (for reference only)
0
10 ft
(3
m)
10 ft
(3
m)
20 ft
(6
m)
20 ft
(6
m)
5 ft
(1.5
m)
5 ft
(1.5
m)
0
10 ft
(3
m)
10 ft
(3
m)
20 ft
(6
m)
20 ft
(6
m)
30 ft
(9
m)
30 ft
(9
m)
10 ft (3 m)
20 ft (6 m)
30 ft (9 m)
4 ft (1.2 m)
0 10 ft (3 m)
20 ft (6 m)
4 ft (1.2 m)
0
28 | Lutron
Easy installation
Easily reassign Change circuit with button press; no rewiring
* Dual-tech, no-neutral models require line-and load-specific wiring
Simplified wiringMistake-proof wiring — no polarity for line- or load-side wiring
Black
Black
Any voltage 120 V & 120 V – 277 V
Any phase Phase A, B, or C
Single-circuit (including dimming)
Any voltage 120 V – 277 V
Any phase Phase A, B, or C
Circuit 1
Circuit 2
Dual-circuit
28 | Lutron
29 | Lutron
Easy setup
No dip switches or dials
Easy-to-see LEDs and asettings button
Mode
• Occupancy
• Ambient light detection
• Vacancy
Simple button- press changes settings
• Timeout • Sensitivity
Sensor mode settings
30 | Lutron
0–10 V dimmers and dual-tech models feature easy-to-see LEDs to indicate settings
Dual-Circuit models feature independent settings per circuit
30 | Lutron
31 | Lutron
2A PIRsingle circuit
5A PIRsingle circuit
6A PIRsingle circuit
PIRdual circuit
Model number
MS-OPS2 MS-OPS5M MS-OPS6M2-DV MS-OPS6-DDV
MS-OPS6M2N-DV neutral model
Technology XCT PIR XCT PIR XCT PIR XCT PIR
Coverage (sq ft) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor)
Timeout 1/5/15/30 minutes 1/5/15/30 minutes 1/5/15/30 minutes 1/5/15/30 minutes
Voltage 120 V 120 V 120-277 V 120-277 V
Amperage/wattage 2 A lighting5 A lighting
3 A fan6 A lighting
3 A (120 V) fan6 A lighting per circuit
4.4 A fan (120 V) per circuit
Single pole, 3-way, Multi-location
Single poleSingle pole / 3-way
Multi-location3-way/Multi-location Single pole
Ambient light detection Smart Smart Smart Smart
Tamper resistant lens • • • •
† Neutral models only. No neutral models are single pole only.
32 | Lutron
C•L dimmer sensor
0–10 V dimmer sensor
Single-circuit dual tech
Dual-circuit dual tech
Model number
MSCL-OP153M MS-Z101 MS-A102 MS-A202
MS-B102 neutral model
MS-B202 neutral model
Technology XCT PIR XCT PIRXCT dual-technology (PIR and ultrasonics)
XCT dual-technology (PIR and ultrasonics)
Coverage (sq ft) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor)
Timeout 1/5/15/30 minutes 1/5/15/30 minutes 1/5/15/30 minutes 1/5/15/30 minutes per circuit
Voltage 120 V 120-277 V 120-277 V 120-277 V per circuit
Amperage/wattage600 W inc/halogen
150 W LED/CFL8 A lighting
neutral optional6 A lighting
4.4 A fan (120 V) per circuit6 A lighting per circuit
4.4 A fan (120 V) per circuit
Single pole, 3-way, Multi-location
3-way/Multi-location 3-way/Multi-location 3-way/Multi-location † 3-way †
Ambient light Smart Smart or fixed Smart or fixed Smart or fixed
Tamper resistant lens • • •
† Neutral models only. No neutral models are single pole only.
33 | Lutron
SkylarkAriadni Diva Skylark Contour Skylark Contour slide-to-off
GRAFIK T Nova T*Lumea
Lutron dimmers available in a range of styles and colors
Maestro Maestro sensor dimmer
Maestro Wireless dimmer and Radio Powr Savr wireless occupancy sensor
Caséta Wireless in-wall dimmer with Pico remote
Caséta Wireless lamp dimmer with Pico remote
Standalone dimmers Architectural dimmers
Digital dimmers Wireless controls
2 | Lutron
Dimmers
3 C•L dimmers
9 Reverse phase dimmers
11 Phase select dimmers
13 Dimmer capabilities
15 0–10 V dimmers
Bulbs & Sensors
21 Testing LED bulb Performance
25 In-wall sensors
Table of Contents
What sets Lutron apart from the restThis guide covers our extensive line of reliable LED controls and the
features that make them stand out from the rest. Whether your job
requires a dimmer, sensor, or both, you can count on the Lutron
difference to give your customers the best LED control experience.
THE LUTRON DIFFERENCE
Satin Colors**
Hot (HT)
Merlot (MR)
Plum (PL)
Turquoise (TQ)
Sea Glass (SG)
Taupe (TP)
Eggshell (ES)
Biscuit (BI)
Snow (SW)
Palladium (PD)
Midnight (MN)
Sienna (SI)
Terracotta (TC)
Greenbriar (GB)
Bluestone (BG)
Mocha Stone (MS)
Goldstone (GS)
Desert Stone (DS)
Stone (ST)
Limestone (LS)
Gloss Colors**
White (WH)†
Ivory (IV) †
Almond (AL) †
Light Almond (LA)
Gray (GR)
Brown (BR)
Black (BL) †
Architectural Metals (GRAFIK T only)
Satin Brass (SB)
Bright Brass (BB)
Bright Chrome (BC)
Satin Chrome (SC)
Satin Nickel (SN)
Bright Nickel (BN)
Architectural Matte (GRAFIK T and Nova T* only)
White (WH)
Beige (BE)
Ivory (IV)
Almond (AL)
Light Almond (LA)
Gray (GR)
Taupe (TP)
Sienna (SI)
Brown (BR)
Black (BL)
Glass(GRAFIK T only)
Clear Glass (CWH)
* Not available for GRAFIK T** For full availability by product refer to
our catalog† Available colors for Caséta Wireless
LED Control SolutionsSmooth, flicker-free dimming for every application
lutron.comLutron Electronics Co., Inc., 7200 Suter Road, Coopersburg, PA 18036-1299
Customer AssistanceOnline: lutron.com/help Email: [email protected] Phone: 1.844.LUTRON1 (588.7661) — includes 24/7 technical support
Lutron, C·L, Nova T *, Maestro, Diva, Skylark Contour, Skylark, Ariadni, and Caséta are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries. GRAFIK T is a trademark of Lutron Electronics Co.
© 10/2017 Lutron Electronics Co., Inc. I P/N 367-2732 REV B