cv-jamal khatib-for linkedin&rg-v12

72
Curriculum Vitae: Pof J Khatib Version: May 5, 2016 Page 1of72 Professor Jamal Khatib Email: [email protected] SUMMARY Jamal Khatib, BEng, MEng(Sc), PhD, CEng, EUR ING, FHEA, PG.Cert. Ed, PG.Cert. PjtMgt, Cert. EnvMgt, MICE, MIEI, MEPC, MIRED, SMUACSEE, MOIA, is presently Professor of Civil Engineering, Faculty of Science and Engineering at the University of Wolverhampton (UoW) - UK. His academic career began in 1987 as a Research Student/Assistant/Fellow, at the University of Aberdeen. In 1994 he moved to take another Research Fellow post at the University of South Wales) until 1997. He then took a permanent position as a Lecturer/Senior Lecturer in Civil Engineering at Sheffield Hallam University (SHU). During that time and due to research collaboration with IMUST-China, he was awarded the title of Honorary Professor in 2001. After 9 years at SHU, he moved to the University of Wolverhampton as a Reader in Civil Engineering and became a Professor in July12. In 2010, he achieved the Chartered Engineer status of the Institution of Civil Engineer (ICE) and in 2015 he achieved the European Engineer status (EUR ING). Areas of research specialism include a number of sustainable construction materials themes: a) use of waste materials in the production of construction/structural materials, b) novel construction materials (e.g. metakaolin), c) concrete subjected to harsh environments, d) lightweight and self-compacting concrete and e) behaviour of structural materials. Prof Khatib was one of the early UK researchers who conducted research on metakaolin as partial substitution of cement and his publications in this area have been extensively cited. According to the ISI Web of Science and Scopus Prof Khatib has an H-index of 16 and 18 respectively. Microsoft Academic classified Prof Khatib as one of the top authors in cement with a G-Index of 18 Also and according to Google scholar there is more than 2600 citations, an H-index of 23 and i10-index of 34. Many papers were ranked as the top 25 articles. The products of his extensive research activities have been comprehensively disseminated through: over 350 refereed academic journal & conference papers, text books, abstracts, research seminars and workshops; articles and features. He acts as a reviewer to more than 70 international academic journals, book publishers and others. He sits on the technical committees of many international research conferences. He is an Editorial Board member of 10 academic Journals including the Editor-in-Chief role of the Journal of Civil Engineering and Architecture-USA, and the International Journal of Engineering & Technology, Associate Editor for the Journal of Emerging Trend in Engineering & Applied Sciences. Prof Khatib was a submitting staff member for the RAE/REF 1996 (USW), 2001 (SHU) and 2008 & 2014 (UoW). GENERAL Male; good health; married with 2 children; native domicile UK. INTERESTS Reading, creative thinking, writing (e.g. poetry), walking, environment, yoga, was the postgraduate student representative & member of the photographic society PERSONAL SKILLS Literate with PC platforms. Extensive experience of common software packages (e.g. Word; Excel; PowerPoint; world-wide-web; email systems and networks). Ability to take things to successful completion. Pays particular attention to detail. Works well in a flexible (empowered) environment under own initiative, but also a good ‘team player’. Excellent communication skills. Experience of addressing large and varied audiences and can communicate & effectively interact with individuals at all levels. Has developed a strong network of contacts to support his research. Excellent time management skills. Passionate about research. Multi-Lingual. KEYWORDS Thrive on challenge, punctual, reliable, conscientious, focused, committed, enthusiastic.

Upload: jamal-khatib

Post on 10-Jan-2017

316 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 1of72

Professor Jamal Khatib Email: [email protected]

SUMMARY Jamal Khatib, BEng, MEng(Sc), PhD, CEng, EUR ING, FHEA, PG.Cert. Ed, PG.Cert.

PjtMgt, Cert. EnvMgt, MICE, MIEI, MEPC, MIRED, SMUACSEE, MOIA, is presently Professor of Civil Engineering, Faculty of Science and Engineering at the University of Wolverhampton (UoW) - UK. His academic career began in 1987 as a Research Student/Assistant/Fellow, at the University of Aberdeen. In 1994 he moved to take another Research Fellow post at the University of South Wales) until 1997. He then took a permanent position as a Lecturer/Senior Lecturer in Civil Engineering at Sheffield Hallam University (SHU). During that time and due to research collaboration with IMUST-China, he was awarded the title of Honorary Professor in 2001. After 9 years at SHU, he moved to the University of Wolverhampton as a Reader in Civil Engineering and became a Professor in July12. In 2010, he achieved the Chartered Engineer status of the Institution of Civil Engineer (ICE) and in 2015 he achieved the European Engineer status (EUR ING). Areas of research specialism include a number of sustainable construction materials themes: a) use of waste materials in the production of construction/structural materials, b) novel construction materials (e.g. metakaolin), c) concrete subjected to harsh environments, d) lightweight and self-compacting concrete and e) behaviour of structural materials. Prof Khatib was one of the early UK researchers who conducted research on metakaolin as partial substitution of cement and his publications in this area have been extensively cited. According to the ISI Web of Science and Scopus Prof Khatib has an H-index of 16 and 18 respectively. Microsoft Academic classified Prof Khatib as one of the top authors in cement with a G-Index of 18 Also and according to Google scholar there is more than 2600 citations, an H-index of 23 and i10-index of 34. Many papers were ranked as the top 25 articles. The products of his extensive research activities have been comprehensively disseminated through: over 350 refereed academic journal & conference papers, text books, abstracts, research seminars and workshops; articles and features. He acts as a reviewer to more than 70 international academic journals, book publishers and others. He sits on the technical committees of many international research conferences. He is an Editorial Board member of 10 academic Journals including the Editor-in-Chief role of the Journal of Civil Engineering and Architecture-USA, and the International Journal of Engineering & Technology, Associate Editor for the Journal of Emerging Trend in Engineering & Applied Sciences. Prof Khatib was a submitting staff member for the RAE/REF 1996 (USW), 2001 (SHU) and 2008 & 2014 (UoW).

GENERAL Male; good health; married with 2 children; native domicile UK. INTERESTS Reading, creative thinking, writing (e.g. poetry), walking, environment, yoga, was

the postgraduate student representative & member of the photographic society PERSONAL SKILLS

Literate with PC platforms. Extensive experience of common software packages (e.g. Word; Excel; PowerPoint; world-wide-web; email systems and networks). Ability to take things to successful completion. Pays particular attention to detail. Works well in a flexible (empowered) environment under own initiative, but also a good ‘team player’. Excellent communication skills. Experience of addressing large and varied audiences and can communicate & effectively interact with individuals at all levels. Has developed a strong network of contacts to support his research. Excellent time management skills. Passionate about research. Multi-Lingual.

KEYWORDS Thrive on challenge, punctual, reliable, conscientious, focused, committed, enthusiastic.

Page 2: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 2of72

ACADEMIC QUALIFICATIONS PhD, Construction/Structural Materials, University of Aberdeen - UK.

MSc (taught course), Structural Engineering, University of Liverpool –

UK

BEng, Civil/Structural Engineering, BAU – Lebanon

Postgraduate Certificate in Teaching and Learning in Further and Higher Education - Sheffield Hallam University - UK

Postgraduate Certificate in Project Management with Distinction, Sheffield Hallam University – UK

Certificate in Environment Management System-Institute of Quality Assurance - UK

PROFESSIONAL/OTHER QUALIFICATIONS Honorary Professor - Awarded by the Inner Mongolia University of Science

and Technology, China

Visiting Professor – University of La Rochelle, France, June/July 2015

Chartered Engineer (CEng), Member of the Institution of Civil Engineers (MICE)-UK.

Fellow of the Higher Education Academy (FHEA) - UK.

Chartered Engineer (CEng), Member of the Institution of Engineers of Ireland (MIEI)

Member of the “ Ordre des Ingenieurs et Architects”- Liban.

Member of the Engineering Professors’ Council – UK

European Engineer (EUR ING), European Federation of National Engineering Associations (FEANI)

Member of the Institute of Research Engineers and Doctors (IRED), www.theired.org Senior Member of the Universal Association of Civil, Structural & Environmental Engineers

Page 3: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 3of72

CAREER CHRONOLOGY Professor of Civil Engineering (Construction

Materials), Faculty of Science and Engineering Reader in Civil Engineering Materials, Built Environment, School of Technology Member of the West Midlands Centre for Constructing Excellence (WMCCE) Project Manager (Centre for Infrastructure Management-CIM) Lecturer / Senior Lecturer Research Fellow Research Fellow Teaching / Research Assistant

University of Wolverhampton University of Wolverhampton WMCCE; University of Wolverhampton Sheffield Hallam University Sheffield Hallam University University of South Wales (Formerly University of Glamorgan) University of Aberdeen University of Aberdeen

CONTRIBUTION TO MANAGEMENT OF THE FACULTY Member of the Research Student Management Board (RSMB)

Member of the School Ethics Committee Member of the West Midlands Centre for Constructing Excellence (WMCCE) Member of the Health and Safety Committee Member of the laboratory committee Leader of the Civil Engineering & Built Environment Research Group

AWARD LEADERSHIP 2008-to-date 2011-to-2014

MSc Civil Engineering MSc Civil Engineering Management

EXTERNAL ACTIVITIES External Examiner for the undergraduate Civil Engineering Provision (FD, BSc

and BEng) at the University of Derby External Advisor for the MSc Course in Civil Engineering at Anglia Ruskin University

Page 4: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 4of72

TEACHING EXPERIENCE 2007-to-date: 1997-2006 1994-1997 1987-1993

Professor/Reader Lecturer / Senior Lecturer PT Teaching Assistant PT Teaching Assistant

University of Wolverhampton Sheffield Hallam University University of South Wales University of Aberdeen

COURSES TAUGHT INCLUDE: SUBJECTS TAUGHT INCLUDE:

Civil Engineering Construction Project Management Construction Law CAD and Construction Civil Engineering Civil Engineering Civil & Environmental Engineering Construction Management Quantity Surveying Building Surveying Building Studies Architectural Technology Civil Engineering Civil Engineering Skills (CV1007) Civil Engineering Technology (CV1005) The Civil Engineer and Society (CV2016) Structural Analysis I (5CV002/CV2003/ 2013) Structural Analysis II (6CV006/CV3003/3013) Structural Applications (5CV001) Environmental Engineering (CN2254) Design (CV2007) Environmental & Sustainable Practice (CN2033) Final Year Design Project (6CV008/CV3007) Final Year Dissertations - BSc (6CV001) Final Year Dissertations - BEng ( 6CV002) Mechanics of Materials Structural Analysis and Design Design of Structural Elements Engineering Drawing Engineering Studies Construction Process Measurement (SMM7) Construction Cost Studies Traditional Drawing Practice Construction Professional Studies Interdisciplinary Project Fluid Mechanics Construction Materials Engineering Materials Field Surveying Advanced Structural Analysis (CV4004/7CV002) Design for Construction (7CV006) Integrated Design Project (7CV007) Remediation Methods (CV4003) Research Methods (CN4044) Investigative Studies (CV4007) Construction Materials

Level MSc MSc MSc MSc BEng BSc BSc BSc BSc BSc BSc BSc HNC/D Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Undergraduate Postgraduate Postgraduate Postgraduate Postgraduate Postgraduate Postgraduate Postgraduate

Page 5: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 5of72

RESEARCH AND SCHOLARSHIP ACTIVITY INTRODUCTION RESEARCH INTERESTS:

Research and Consultancy are in the broad field of Sustainable Construction/Structural Materials. Expertise includes; the utilisation of waste/recycled and novel materials in cement based systems to produce construction materials (e.g. concrete, pavement). Waste comprises industrial by-products (e.g. fly ash, silica fume, slag, desulphurised waste-FGD), demolition waste (e.g. recycled brick, recycled concrete, ground brick, foamed glass), municipal solid waste incineration bottom ash (MSWI-BA), sludges (e.g. sewage). Novel materials include metakaolin (calcined clay), hybrid/composite materials, novel light-weight aggregates, alkali activation of pozzolans and geopolymers. Prof Khatib was one of the early UK researchers to study the effect of metakaolin on the performance of cement based materials. Published work on metakaolin has been widely cited (e.g. papers no.7 & 19 were cited more than 200 times as per Google Scholar). Other consultancy/research expertise includes Lime Stabilisation of Soils, utilisation of industrial by-products to stabilise contaminated soils, Environmental Assessment of Soil & Construction Materials containing waste (e.g. MSWI-BA) and Rammed Earth. Structural Assessment and Performance of Building Materials form integral parts of this work. Prediction and modeling of thermal induced cracking in reinforced concrete structures is another area of research. Research interests are also in the use of waste/recycled materials in Pavement Engineering. Other research activities include Construction Project Management.

Research involves the study of mechanical and durability properties. These include, strength (e.g. compressive, flexural), non-destructive testing, chemical attack, prediction of chloride penetration into concrete and its effect on reinforcement corrosion, carbonation, porosity and pore size distribution, capillary water absorption, shrinkage (e.g. chemical, plastic, autogenous) using novel techniques, product of hydration using TG analysis, leaching characteristics of heavy elements and others (i.e. environmental impact). The above research focuses on the utilisation of waste/recycled materials in producing high grade construction materials and this is in line with the government (and global) agenda to reduce CO2 emission, which rises the potential for research funding. Prof Khatib has more than 350 publications. Also and in addition to what stated earlier about the citation of papers, papers no. 29 published in late 2008, has been cited more than 200 times and was ranked as the top 25 articles twice. Also paper no. 27 (published in late 2008) has been cited more than 60 times and was ranked as the top 25 articles 3 times.

RESEARCH SUPERVISION SUMMARY:

Sixteen completed PhD supervisions, numerous successfully completed MSc’s and undergraduate research projects. For example, in 2010-2011 alone, Prof Khatib has supervised 38 BSc/BEng/MSc dissertation research projects. Currently supervising twelve PhD students (7 as DoS) and over 30 PhD examinations. Full details of PhD supervision and examination profile are given below.

Page 6: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 6of72

COMPLETED PHD SUPERVISIONS (16) CURRENT PHD SUPERVISIONS (12) PHD / MPhil EXAMINATIONS (30) INDEPENDENT CHAIR of PhD Examination (4 held at the University of Wolverhampton)

Page 7: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 7of72

MEDIA 1. 2000 Sandberg Challenge National trophy: Ranked 2nd in a national competition to

produce high strength concrete; beaten for 1st place by University College London. Featured in Institution of Structures Journal. http://www.istructe.org/thestructuralengineer/files/se/SE142001.pdf

2. 2001 Visit to Baotou University in China http://www.chinahorels.com/Baotou_University.html http://www.shu.ac.uk/cgi-bin/news_full.pl?id_num=PR133&db=01

3. 2009 Featured in the News Round-up (12 October 2009), Construction online http://www.bbhealthcare.co.uk/show.php?page=story&newsPage=4&id=1263&story=1263

4. 2009 Highly acclaimed recent book on Sustainability of Construction Materials http://www.woodheadpublishing.com/en/book.aspx?bookID=1394

5. 2010

Access to the citation of my papers on Google Scholar http://scholar.google.com/citations?hl=en&user=eRDOWn8AAAAJ&view_op=list_works&pagesize=100

6. 2010 Parry Associates (West Midlands) industrial Collaboration with the University of

Wolverhampton on sustainable building materials (various) http://www.parrypeoplemovers.com/pdf/NL57.pdf http://www.parrypeoplemovers.com/pdf/NL58.pdf http://www.parrypeoplemovers.com/pdf/NL59.pdf http://www.parrypeoplemovers.com/pdf/NL61.pdf http://www.parrypeoplemovers.com/pdf/NL60.pdf

7.

2012

West Midlands Council, European winning award http://cordis.europa.eu/search/index.cfm?fuseaction=proj.document&PJ_LANG=EN&PJ_RCN=12898169&pid=34&q=2D2FAA8BD56D7B091CE67BB014675D61&type=adv http://www.wmcouncils.gov.uk/wmes-birmingham-news

8. 2012 Green collaborations with Turkish University http://www.wlv.ac.uk/default.aspx?page=33762

9. 2013 Teknoloji Fakültesi İnşaat Mühendisliği Bölümü II. Deprem ve Sürdürülebilir Malzeme Çalıştayına ev sahipliği yaptı. http://tf.gazi.edu.tr/posts/view/title/teknoloji-fakultesi-insaat-muhendisligi-bolumu-ii.-deprem-ve-surdurulebilir-malzeme-calistayina-ev-sahipligi-yapti.-49039

10. 2013 Research meeting at the House of Commons http://www.wlv.ac.uk/staff/news_and_events/wlvinsider/news/commons.aspx

11. 2013 Institution of Structural Engineers – Undergraduate Research Grant http://www.istructe.org/education/scholarships-grants-and-bursaries/undergraduate-research-grants

12. 2013 Microsoft Academic Search – Top authors in Cement (No 25) http://academic.research.microsoft.com/ranklist?entitytype=2&topdomainid=12&subdomainid=1&..

13. 2013 Philip Owens-Concrete development tackled by a student http://www.wlv.ac.uk/Default.aspx?page=36113

14. 2014 British Council-Turkey Higher Education Funded Project http://protect-environment.org/index.php?sub=2&secim=37

Page 8: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 8of72

15. 2014 British Council: Knowledge Partnerships for an Innovative Future http://www.britishcouncil.org.tr/sites/britishcouncil.tr2/files/knowledge-partnerships-for-an-innovative-future.pdf

16. 2014 Heroes presentation, celebration event on 24 September 2014, University of Wolverhampton https://www.dropbox.com/s/27rzyuhcqxnl18a/Final%20Video%2022New.mp4?dl=0

17. 2014 British Council: Workshop on UK Research Collaboration with Kazakhstan to be held in Almaty between 26-30 January 2015 http://epc.ac.uk/wp-content/uploads/2014/10/Wolverhampton-Workshop-Jan-2015-Open-Call-Advert.pdf http://www.britishcouncil.kz/newton-al-farabi/joint-seminars http://www.britishcouncil.kz/sites/britishcouncil.kz2/files/utilisation_and_treatment_of_wastes.pdf http://www.britishcouncil.org/education/science/current-opportunities/kazakhstan-workshop-waste

18. 2015 Research Collaboration between UK and Kazakhstan

http://www.kazpravda.kz/fresh/view/bezothodnost-proizvodstva--vo-glavu-ugla http://www.kazntu.kz/en/node/11242

19. 2015 Company Team Member; Intermediate Technology Workshops Ltd – In association with Parry People Movers Ltd. http://www.intermediatetechnologyworkshops.com/#!meet-the-team/cyse

20. 2015 International Workshop on UK Research Activities with Kazakhstan through

Newton-Al Farabi partnership program http://www.kazntu.kz/en/node/11242

21

2015

Scholar Google 150 most cited Civil Engineering, authors ordered by Scopus h-index http://universe.bits-pilani.ac.in/uploads/Scholar%20Google%20150%20most%20cited%20authors.pdf http://scholar.google.pt/citations?view_op=search_authors&hl=pt-PT&mauthors=civil+&before_author=VTbg_9ZeAAAJ&astart=0

22 2015 Intermediate Technology Workshop http://www.intermediatetechnologyworkshops.com/#!meet-the-team/cyse

23 2016 Institution of Structural Engineers – UK https://www.istructe.org/education/scholarships-grants-and-bursaries/msc-research-grants

AWARDS/PRIZES 1. 1995 Concrete Society regional prize (South Wales Branch) for supervising and

producing excellent quality undergraduate dissertation

2. 1996 Concrete Society regional prize (South Wales Branch) for supervising and producing quality undergraduate dissertation

3. 1998 Concrete Society regional prize (South Yorkshire Branch) for supervising and producing quality undergraduate dissertation

4. 1999 Concrete Society regional prize (South Yorkshire Branch) for supervising and producing quality undergraduate dissertation

5. 1999 Sandberg Challenge National trophy: Ranked 2nd in a national competition to produce high strength concrete; beaten for 1st place by University College London. Featured in the New Civil Engineer Magazine

Page 9: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 9of72

6. 2000 Sandberg Challenge National trophy: Ranked 2nd in a national competition to

produce high strength concrete; beaten for 1st place by University College London. Featured in Institution of Structures Journal. http://www.istructe.org/thestructuralengineer/files/se/SE142001.pdf

7.

2008

Prof Khatib’s name was included in the Marquis’ Who is Who in the world.

8. 2012 Nominated for the Students’ Union Teaching Award - UoW (3 May 2012) 9.

2014

Nominated for the Students’ Union Teaching Award – Category: Inspirational Lecturer - UoW (April 2014)

10.

2014

Nominated for the Students’ Union Teaching Award – Category: Outstanding Lecturer - UoW (April 2014)

RESEARCH GRANTS AND CONSULTANCIES 1. 2015: Awarded an MSc Research Grant by the Institution of Structural Engineers

on “Enhancing the flexural capacity of reinforced concrete beams made with recycled lightweight aggregates using carbon fibre”, ” (one of four awarded nationally). £500.

http://www.istructe.org/education/scholarships-grants-and-bursaries/msc-research-grants 2. 2014-2015: (Lead Coordinator) British Council Award (Project No: 150778454)

(£44,200): Newton-Al-Farabi Partnership Programme- British Council Researcher Links Programme. “Utilisation and Treatment of wastes arising from mining activities, oils and other Industries: a) Mining solid wastes; b) Mining waste water; c) Oil and Gas industry waste; d) Coal power station wastes; e) Cement manufacture waste and e) Food waste”, held between 27-31Jan15, University of Wolverhampton, Satpayev KazNTU & Al-Farabi Universities. http://www.britishcouncil.org/education/science/current-opportunities/kazakhstan-workshop-waste

3. 2013-2014: (Lead Investigator) British Council Award (TR/012012/KP04) (£5,000):

UK-Turkey HE Partnership Programme. “Reducing Energy Requirements in Construction by Using Industrial By-Products”. University of Wolverhampton and Sakarya University.

4. 2012-2013: Awarded a Research Grant by the Institution of Structural Engineers

on “Influence of shredded waste plastic on flexural performance of reinforced concrete beams” (one of ten awarded nationally). £800. http://www.istructe.org/knowledge/topic_areas/research/pages/undergraduateresearchgrants.aspx

5. 2012-2013: (Lead Investigator) British Council Award (TR/012012/KP04)

(£15,900): UK-Turkey HE Partnership Programme. “Reducing Energy Requirements in Construction by Using Industrial By-Products”. University of Wolverhampton and Sakarya University.

6. 2013-2015: (Lead Investigator) European Research proposal - FW/JR rea.p.2(2011)

– Marie Curie Action-International Incoming Fellow (IIF)- IIF – Proposal Number 300427 – Project Acronym: ProSec. Call identifier: FP7-PEOPLE-2011-Value €279,000. Contract has been signed (Score 90.5/100)

Page 10: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 10of72

7. 2011-2012: Awarded a Research Grant by the Institution of Structural Engineers on “Flexural behavior of reinforced concrete beams containing sustainable novel lightweight aggregate”. (one of seven awarded nationally). £800. http://www.istructe.org/knowledge/topic_areas/research/pages/undergraduateresearchgrants.aspx

8. 2010: Royal Society Travel Grant to attend an International Conference in Ancona-

Italy, (£1300). 9. 2012-2014: Nigerian Government Scholarship for PhD Researcher on the Innovative

Production of Rammed Earth Block. (£15,000) 10. 2011–2014: Northern Iraqi Government Scholarship for PhD Researcher ‘Producing

sustainable light-weight construction materials’. The research will focus on the use of local and less energy intensive materials. (~ £30,000).

11. 2010: Studentship awarded by the University to conduct research on alkali activated

fly ash (waste material). The research would allow the use of fly ash to fully replace cement (energy intensive material). ~ (£42,000)

12. 2010: Studentship awarded by the University to conduct research on the use of

sewage sludge in construction applications which would result indirectly in a less energy intensive wastewater treatment and thereby positive impact on the environment. circa (£42,000)

13. 2010: Studentship awarded by the University to conduct research on thermal

induced cracking in reinforced concrete structures. The research aims to predict the likelihood of cracks and take appropriate actions, circa (£9000)

14. 2008: Studentship awarded by the University to conduct research on the

use/environmental impact of municipal solid waste incineration bottom ash (MSW-IBA) associated with its uses in construction applications, circa (£9000)

15. 2001: Deterioration of reinforced concrete pipe-on behalf of a materials and testing

company in South Yorkshire. This was part of a large investigation to assess the reason for this deterioration. (circa £1000)

16. 1997-2000: EPSRC Research Reference A338 1201, ‘Use fly ash and metakaolin in

concrete applications, 1996, £101,769 (£123,269 in total including industrial contribution), co-investigator

17. 2000: Structural assessment of Sheffield Supertram - Bond between the track and

adjacent concrete. Consultancy work. ( circa £8000). 18. 1989: Structural and durability performance of new roofing materials for domestic

dwelling, (circa £700). 19. 1989: Structural assessment of damaged building due to fire in North East Scotland,

circa (£500).

Page 11: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 11of72

EDITORIAL ACTIVITY Member of the Editorial Board of academic journals:

1. Structural Survey Journal, ISSN: 0263-080X http://www.emeraldinsight.com/products/journals/journals.htm?id=ss

2. Journal of Materials Science, ISSN 1392-1320, http://internet.ktu.lt/en/science/journals/medz/frames1_1.html

3. Materials Science and Engineering Progress (MSEP) Journal, http://www.engineerspress.com/index.php?option=com_content&view=article&id=49&Itemid=65 http://www.engineerspress.com/index.php?option=com_content&view=article&id=50&Itemid=66

4. Associate Editor - Journal of Emerging Trends in Engineering and Applied

Sciences (JETEAS), ISSN: 2141-7016 http://www.jeteas.scholarlinkresearch.org/index.php (Also invited to be the Editor-in-Chief)

5. Editor-in-Chief - Journal of Civil Engineering and Architecture, USA, ISSN 1934-

7359, http://www.davidpublishing.com

6. Editor-in-Chief – International Journal of Engineering and Technology (IEJT), http://www.ijet.ielas.org/index.php/IJET/about/editorialTeam

7. Journal of the ISRN Materials Science, ISSN: 2090-6099 ISSN-L: 2090-6080

http://www.hindawi.com/isrn/ms/ 8. Journal of Materials and Engineering Structures, ISSN 2170-127X

http://revue.ummto.dz/index.php/JMES/about/editorialPolicies#custom-0 9. Athens Journal of Technology & Engineering, Engineering & Architecture Research

Division of the Athens Institute for Education and Research (ATINER). ISSN: 2241-8237, http://www.atiner.gr/journals/technology/board.htm

10. Material Science and Engineering with Advanced Research Journal (MSERJ)-Verizona

Publisher http://verizonaonlinepublishing.com/MaterialScienceEditors.aspx

11. CSID Journal of Infrastructure Development, Center for Sustainable Infrastructure

Development, Faculty of Engineering, Universitas Indonesia, ISSN: 2407-5957 http://www.csidui.org/csid-journal-of-infrastructure-development/

12. Sakarya University Journal of Science, ISSN: 1301-4048 e-ISSN: 2147-835X

http://www.saujs.sakarya.edu.tr/about/editorialTeam

13. Invited Guest Editor for a special issue of the Advances in Civil Engineering Journal entitled “Self-Compacting Concrete” to be published in July 2014, ISSN 1687-8086, http://www.hindawi.com/journals/ace/

Page 12: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 12of72

14. Invited Guest Editor for a special issue of the World Scientific Journal entitled “Applications of Low-Impact Materials and Technologies in Building and Construction” to be published in May 2014, ISSN 2356-6140, http://www.hindawi.com/journals/tswj/osi/civil.engineering/

15. Co-Editor (2014): International Conference of Industrial Technologies and Engineering,

Shymkent, Kazakhstan, M Auezov South Kazakhstan State University, 30-31 October 2014, http://icite.ukgu.kz/content/editors

16. Editor (2015): 2015 International Conference on Energy, Environmental & Sustainable

Ecosystem Development EESED 2015, 21-23 August 2015, Kunming, Yunnan, China. http://www.ic3e-2015.org/

17. Editor (2015): Invited by ATINER to Edit a volume on Architectural and Urban Theory:

Architectural Construction & Materials & Building Technologies (on 26 May 2014), Athens Institute for Education and Research (ATINER), ISBN: 978-960-598-026-9 http://www.atiner.gr/ http://www.atiner.gr/docs/ALL_PUBLICATIONS.htm

18. Editor (2016): 2016 International Conference on Energy, Environmental & Sustainable

Ecosystem Development EESED 2016, 12-14 August 2016, Shenzhen, Guangdon, China; http://www.ic3e-2016.org/?op=committee

19. Co-Editor (2015): International Conference of Industrial Technologies and Engineering

(ICITE 2015), Shymkent, Kazakhstan, M Auezov South Kazakhstan State University, 30-31 October 2015, ISSN 2410-4604 ISBN 978-99-65-03-397-1 http://icite.ukgu.kz/content/editors

20. International Journal of Scientific Research in Information Systems and Engineering

(IJSRISE), ISSN 2380-8128 (print) ISSN 2380-5579 (online). http://www.ijsrise.com/index.php/ijsrise/index http://www.ijsrise.com/index.php/ijsrise/about/editorialTeam

21. El-Cezeri Science and Engineering Journal, Publisher: TUBIAD; ISSN: 2148-3736; http://www.ecjse.com/index.php/ECJSE http://ecjse.com/about/displayMembership/5000000846

22.

Page 13: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 13of72

REFEREEING AND REVIEWING Reviewer of EPSRC proposal:

1. Title: Details would be provided upon request. P N: M L-T P N W R; Reference: EP/xxxxxx/y https://je-s.rcuk.ac.uk/Jes2WebLoginSite/Login.aspx

Reviewer of Royal Society proposal:

2. Title: Details would be provided upon request. Energy intensity and environmental analysis of a reconfigurable technologies, Newton Advanced Fellowship, 2016/R1, Application Ref: NA150293; https://e-gap.royalsociety.org/

Reviewer of papers for leading academic Journals and others: https://publons.com/author/?order_by=merit&page=10&results=10&asjc=190

1. Journal of Cement & Concrete Research (Elsevier) http://ees.elsevier.com/cemcon/

2. American Concrete Institute (ACI) - Materials Journal http://mc.manuscriptcentral.com/aci

3. Journal of Materials & Structures, RILEM http://www.editorialmanager.com/maas/

4. Proceedings of the ICE-Construction Materials Journal http://www.icevirtuallibrary.com/content/serial/coma

5. Journal Construction & Building Materials (Elsevier) http://ees.elsevier.com/conbuildmat/

6. Journal of Materials in Civil Engineering - American Society of Civil Engineers (ASCE) http://jrnmteng.edmgr.com/

7. Journal of Materials (Springer) http://jmsc.edmgr.com/

8. Journal of Resources, Conservation & Recycling (Elsevier) http://ees.elsevier.com/recycl/

9. Journal of Applied Clay Science (Elsevier) http://ees.elsevier.com/clay/

10. Journal of Cement and Concrete Composites (Elsevier) http://ees.elsevier.com/ccc/

11. Journal of Engineering Geology (Elsevier) http://ees.elsevier.com/engeo/default.asp

Page 14: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 14of72

Reviewer of papers for leading academic Journals and others (continued):

12. Geotechnical and Geological Engineering Journal https://www.novapublishers.com/catalog/product_info.php?cPath=125&products_id=13120

13. Journal of Automation in Construction (Elsevier)

http://ees.elsevier.com/autcon/default.asp

14. Journal of Computers and Concrete http://technopress.kaist.ac.kr/?journal=cac&; www.techno-press.com;

15. Journal of Hazardous Materials (Elsevier) http://ees.elsevier.com/hazmat/

16. Journal: Materials and Design (Elsevier) http://ees.elsevier.com/jmad/

17. Journal: Building and Environment (Elsevier)

http://ees.elsevier.com/bae/ 18. Structural Survey Journal

http://www.emeraldinsight.com/products/journals/journals.htm?id=ss

19. International Journal of Non-Linear Mechanics; (Elsevier) ISSN: 0020-7462 http://ees.elsevier.com/nlm/

20. Neural Computing and Applications Journal; (Springer Publisher) ISSN: 0941-0643 and 1433-3058 http://ncaa.edmgr.com/ 21. Journal of Materials Science

http://www.matsc.ktu.lt/index.php/MatSc/about/editorialTeam http://internet.ktu.lt/en/science/journals/medz/frames1_1.html

22. Journal-Composite part B: Engineering (Elsevier) http://ees.elsevier.com/jcomb/default.asp

23. Journal: Measurement (Elsevier) http://ees.elsevier.com/meas/

24. Journal of Composite Materials (Sage)

https://mc.manuscriptcentral.com/jcm 25. Fire and Materials: An International Journal- (Wiley Publisher) ISSN: 1099-1018

https://mc.manuscriptcentral.com/fam http://onlinelibrary.wiley.com/journal/10.1002/(ISSN)1099-1018 26. Indian Journal of Engineering and Materials Science

http://scientificadvances.org/journals6P2.htm

27. International Journal of Materials and Product Technology- IJMPT http://www.inderscience.com/browse/index.php?journalCODE=ijmpt

Page 15: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 15of72

Reviewer of papers for leading academic Journals and others (continued):

28. Journal of Testing and Evaluation ASTM - ISSN: 0090-3973 http://www.astm.org/DIGITAL_LIBRARY/JOURNALS/TESTEVAL/index.html https://mc04.manuscriptcentral.com/astm-jote

29. Journal, Indoor and Built Environment (IBE) - Sage pub; ISSN 1420 326X https://mc.manuscriptcentral.com/ibe 30. International Journal of Pavement Engineering & Asphalt Technology–PEAT

http://www.ljmu.ac.uk/BLT/BEST/114015.htm

31. Proceedings of the ICE – Green Materials Journal, ISSN: 2049-1220 http://www.icevirtuallibrary.com/content/serial/gmat

32. International Journal of Engineering Simulation – IJES,

http://www.intjes.co.uk/static/editors.html

33. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), http://www.jeteas.scholarlinkresearch.org/index.php

34. Journal of Zhenjiang University-SCIENCE A – ZUSA http://zusa.edmgr.com/

35. International Journal of Science and Technology – Maejo, [ISSN 1905-7873] www.mijst.mju.ac.th

36. Advance in Engineering Software Journal, (Elsevier) http://www.elsevier.com/wps/find/journaldescription.cws_home/422911/authorinstructions

37. Journal of Civil Engineering and Management- (Taylor & Francis)

http://www.jcem.vgtu.lt/en/ 38. Kuwait Journal of Science and Engineering

http://pubcouncil.kuniv.edu.kw/kjse/english/default.asp

39. Journal of the Korean Society of Civil Engineers-KSCE http://www.editorialmanager.com/ksce/ http://ksce.edmgr.com/

40. International Journal of Concrete Structures and Materials (IJCS)-Springer

http://ijcs.edmgr.com/

41. Journal of Applied Polymer Science http://mc.manuscriptcentral.com/app

42. Journal of Building Engineering (JOBE)- Elsevier ISSN: 2352-7102

http://ees.elsevier.com/jobe/

43. Journal-Archives of Metallurgy and Materials-ISSN: 2300-1909 The Journal of Institute of Metallurgy and Materials Science and Committee on Metallurgy of Polish Academy of Sciences. http://www.degruyter.com/view/j/amm

Page 16: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 16of72

Reviewer of papers for leading academic Journals and others (continued): 44. Journal - SpringerPlus - ISSN: 2193-1801

http://www.springerplus.com/ http://plus.edmgr.com/ 45. Journal of the ISRN Materials Science

http://www.hindawi.com/isrn/ms/

46. Journal: Structural Engineering International, IABSE, https://mc.manuscriptcentral.com/sei

47. International Journal of Global Warming (Inderscience publisher)

http://www.inderscience.com/jhome.php?jcode=ijgw

48. Journal: Mechanical Sciences (Copernicus Publisher) https://administrator.copernicus.org/authentication.php

http://www.mechanical-sciences.net/index.html

49. Journal of Real Estate & Development Economics Research – READER http://www.readerjournal.co.uk/index.php

50. Journal: The Arabian Journal for Science and Engineering (AJSE)

http://www.editorialmanager.com/ajse/ http://ajse.edmgr.com/.

51. Journal: Advances in Materials Science and Engineering http://mts.hindawi.com/reviewer/9239615747155550/

52. Journal of Science and Engineering of Composite Materials http://mc.manuscriptcentral.com/secm

53. Journal of Civil Engineering and Architecture- USA, ISSN 1934-7359, http://www.davidpublishing.com

54. International Journal of Civil Engineering, ISSN 1735-0522

http://ijce.iust.ac.ir/index.php?sid=1&slc_lang=en&logoutmod=1 http://www.editorialmanager.com/ince/default.aspx

55. Journal: The Scientific World Journal http://www.hindawi.com/journals/tswj/osi/civil.engineering/

56. Journal of Materials and Engineering Structures, ISSN 2170-127X

http://revue.ummto.dz/index.php/JMES/about/editorialPolicies#custom-0 57. Journal: Advances in Civil Engineering

http://www.hindawi.com/journals/ace/editors/

58. Journal – Materials – MDPI. ISSN 1996-1944 CODEN: MATEG9 http://www.mdpi.com/journal/materials

59. Journal of Sustainable Cement-Based Materials. (Taylor & Francis)

http://mc.manuscriptcentral.com/tscm

Page 17: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 17of72

Reviewer of papers for leading academic Journals and others (continued): 60. International Journal of Scientific Research in Knowledge, ISSN: 2322-4541

www.ijsrpub.com/ijsrk 61. Journal of Geology and Geosciences-(OMICS) group-engineering journals

http://engineeringjournals.edmgr.com/ http://www.editorialmanager.com/engineeringjournals/default.asp?pg=login.asp

62. Journal: Cogent Engineering

http://www.editorialmanager.com/cogenteng/default.asp http://cogentoa.tandfonline.com/page/aboutJournal?journalCode=oaen20&

63. Journal: Innovative Infrastructure Solutions, Springer- [ISSN: 2364-4176] http://iiso.edmgr.com/

64. Walailak Journal of Science and Technology – WJST, [ISSN 1686-3933] http://wjst.wu.ac.th/index.php/wjst/index

65. International Journal of Environmental Science and Technology (JEST)-Springer (ISSN:

1735-1472) http://jest.edmgr.com/ 66. Journal of Civil and Environmental Engineering-(OMICS) group-engineering journals http://www.editorialmanager.com/engineeringjournals/default.asp?pg=login.asp 67. Journal of Water and Health-IWA Publishing, ISSN Print: 1477-8920 http://jwh.edmgr.com/ 68. Reviewer of 13 papers (and Editor) of a special book/volume on Architectural and Urban

Theory: Architectural Construction, Materials & Building Technologies to be published in 2015, Athens Institute for Education and Research (ATINER), http://www.atiner.gr/

69. International Journal of Accounting Research-(OMICS) group-engineering journals http://www.editorialmanager.com/engineeringjournals/Default.aspx 70. Ingeniería e Investigación Journal, ISSN: 0120-5609 (impreso) 2248-8723 (en linea),

Universida Nacional de Columbia, Sede Bogota; www.revistaingenieria.unal.edu.co 71. International Journal of Geology and Geophysics-(OMICS) group-engineering journals http://www.editorialmanager.com/engineeringjournals/Default.aspx 72. Journal of Material Sciences and Engineering-(OMICS) group-engineering journals

http://engineeringjournals.edmgr.com/ 73. Journal - Structural and Multidisciplinary Optimization- Springer Pub. ISSN: 1615-147X http://samo.edmgr.com/

Page 18: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 18of72

Book Review

1. Book review for Emerald publishing. Reviewed by J M Khatib (2008), January, “Significance of Tests and Properties of Concrete & Concrete-Making Materials”, Editors: J F Lamond & J H Pielert, Publisher: American Society of Testing Materials (ASTM) international, STP 169D, 664p,ISBN 0-8031-3367-7 http://info.emeraldinsight.com/products/engineering/features/promo/concrete_review.htm

2. Book review for Emerald publishing. Reviewed by J M Khatib (2009), October, “Pavement Surface Condition/Performance Assessment: Reliability and Relevancy of Procedures and Technologies-STP 1486”, Editor: Bouzid Choubane, Publisher: American Society of Testing Materials (ASTM) international, STP 1486, 80p, ISBN: 978-0-8031-5521-3 http://info.emeraldinsight.com/products/engineering/features/pavement.htm?PHPSESSID=ocjt6elqsalasbd7gorvkfo2p2& Book Review (continued):

3. Book review for CRC-Taylor and Francis (2016), January, “Cement and Concrete Mineral Admixtures”, Author: M Tokyay,

Report Review

4. Report review for University of Glamorgan (2001), Assessment of a scientific report for G

Veerappan, “The development of low-cost, low-energy cement waste”.

5. Report review for King Fahd University for Petroleum and Minerals (1999), Assessment of a research proposal, “Deterioration of reinforced concrete structures in the Gulf”.

Higher Degree Assessment 1. Report for the University of Kuwait (2016), Assessment of an MSc thesis entitled “Shear

behavior of beams made with hybrid steel polyethylene fiber reinforced cementitious composites, candidate: YA, 19April2016

Academic Promotion Review

6 Professorship and Readership/Associate Professorship applications to assess for various UK universities

Page 19: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 19of72

TECHNICAL / SCIENTIFIC / ADVISORY COMMITTEE MEMBERSHIP

1. Invited Member of the Scientific Committee for: 2016 International Conference on Building Materials and Civil Engineering, BMCE2016, 10-11 Dec 2016, Wuhan, Hubei, China; http://www.bmce2016.org/committee.html

2. Invited Member of the Scientific Committee for:

The 4th Conference on Civil Engineering and safety (CCES 2016), 22-24 September 2016, Xi:an, China, http://www.engii.org/ws2016/Home.aspx?id=808

3. Invited Member of the Scientific/Organising Committee for: 3rd International Conference on Sustainable Civil Engineering Structures and Construction Materials (SCESCM)-Sustainable structures for future generation, 5-7 September 2016, Bali, Indonesia, http://conference.tsipil.ugm.ac.id/scescm/

4. Invited Member of the Scientific/Organising Committee for: An International Conference on Infrastructure Development and Investment Strategies for Africa - Achieving solutions for renewable energy and sustainable development, Livingstone, Zambia, 31 August-12 September 2016, University of Johannesburg, http://diiconference. Org [email protected]

5. Invited Member of the Scientific/Organising Committee for:

Editor (2016): 2016 International Conference on Energy, Environmental & Sustainable Ecosystem Development EESED 2016, 12-14 August 2016, Shenzhen, Guangdon, China http://www.ic3e-2016.org/?op=committee

6. Invited Member of the Scientific Committee for: The 4th International Conference on Sustainable Construction Materials and Technologies (SCMT), Las Vegas, USA, 7-11 August 2016,

www.scmt.org.uk/SCMT4.htm 7. Invited Member of the Scientific/Organising Committee for (ATINER):

6th Annual International Conference on Civil Engineering, Structural Engineering and Mechanics, 13-16 June 2016, Athens, Greece, http://www.atiner.gr/2016/ORG-CIV.htm

8. Invited Member of the Scientific/Organising Committee for:

The First European and Mediterranean Structural Engineering and Construction Conference, EURO-MED-SEC-1, Interaction between Theory and Practice in Civil Engineering and Construction, Istanbul, Turkey, May 24-29, 2016, https://www.isec-society.org/EURO_MED_SEC_01/committees.php

9. Invited Member of the Scientific/Organising Committee for:

International Conference on Materials & Energy (ICOME 2016), La Rochelle – France, 17-20 May 2016, https://apps.univ-lr.fr/cgi-bin/WebObjects/Colloque.woa/wa/menu?code=1561&idMenu=6224&lang=en

10. Invited Member of the Scientific/Organising Committee for:

Editor (2016): 2016 International Conference on Architecture and Civil Engineering (ICACE 2016) will be held on March 19-20, 2016 in Changsha, Hunan, China; http://www.icace2016.org/committee.html

Page 20: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 20of72

TECHNICAL / SCIENTIFIC / ADVISORY COMMITTEE MEMBERSHIP (continued..) 11. Invited Member of the Scientific/Organising Committee for:

International Conference on Advances in Cement and Concrete Technology in Africa (ACCTA), 27-29 January 2016, Johannesburg, South Africa, www.accta2016.com

12. Invited Member of the Scientific/Organising Committee for:

13th Arab Structural Engineering Conference, 13-15 December 2015, Faculty of Technology, University of Blida-Algeria, http://www.univ-blida.dz

13. Invited Member of the Scientific/Organising Committee for: 1st International Workshop on Construction and Electricity Applications on Vocational Education, Anadolu University, Eskişehir, 30 November 2015. http://iwcea2015.anadolu.edu.tr/en/home

14. Invited Member of the Scientific/Organising Committee for:

The 2015 International Conference on Environment, Manufacturing Industry and Economic Development (EMIED 2015), 14-15 November 2015, Wuhan, China. http://www.sdee2015.org/committee.html

15. Invited Member of the Scientific/Organising Committee for: The 5th World Congress on Engineering and Technology (CET 2015), 23-25 October 2015, Suzhou, China, http://www.engii.org/cet2015/ShowOrganizerDetails.aspx?personID=4169 http://www.engii.org/cet2015/OrganizingCommittee.aspx

16. Invited Member of the Scientific/Organising Committee for: Editor (2015): 2015 International Conference on Energy, Environmental & Sustainable Ecosystem Development EESED 2015, 21-23 August 2015, Kunming, Yunnan, China http://www.ic3e-2015.org/?op=committee

17. Invited Member of the Scientific/Organising Committee for:

Decades of Infrastructure Investment Conference – A score card on Empowerment, Growth and Development in Africa, Chrismar Hotel Livingstone, Zambia, 16-18 September 2015, http://diiconference. Org/committee/ [email protected]

18. Invited Member of the Scientific/Organising Committee for:

1st International Conference on Bio-based Building Materials (ICBBM), Clermont University, Clermont-Ferrand, France, 22-24June 2015 https:www.conftool.net/icbbm2015/

19. Invited Member of the Scientific/Organising Committee for:

2nd International Sustainable Buildings Symposium (ISBS 2015), 28-30 May 2015, Gazi University, Ankara, Turkey, http://www.isbs2015.gazi.edu.tr

20. Invited Member of the Scientific/Organising Committee for:

5th Annual International Conference on Civil Engineering, Structural Engineering and Mechanics, 25-28 May 2015, Athens, Greece, http://www.atiner.gr/2015/ORG-CIV.htm

21. Invited Member of the Scientific/Organising Committee for: International Conference on Materials & Energy (ICOMAEN), May 19-22, 2015 Tétouan, Morocco, [email protected]; http://www.enstetouanet.ma/icomaen15/index.php

Page 21: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 21of72

TECHNICAL / SCIENTIFIC / ADVISORY COMMITTEE MEMBERSHIP (continued..) 22. Invited Member of the Scientific Committee for:

Future Concrete 2014, Organised by Advanced Construction Technology Services (ACTS), Doha, Grand Hyatt, Qatar, 2 December 2014. http://www.futureconcrete.com/committe.html

23. Invited Member of the Scientific/Organising Committee for:

3rd International Seminar: Innovation and Valorisation in Civil Engineering & Construction, INVACO’2014, Houari Boumediene University of Science and Technology, Algiers, Algeria, 17-18 November 2014, http://www.usthb.dz

24. Invited Member of the Scientific/Organising Committee for:

ICITE 2014, International Conference of Industrial Technologies and Engineering, Shymkent, Kazakhstan, M. Auezov South Kazakhstan State University, 30-31 October 2014, http://icite.ukgu.kz/ ISBN 978–9965–03-319–3

25. Invited Member of the Scientific/Organising Committee for: 2nd ENEFM2014 International Congress on Energy Efficiency and Energy Related Materials (ENEFM2014), Oludeniz, Turkey, 16-19 October 2014, Turkey http://www.enefm2014.org

26. Invited Member of the Scientific/Organising Committee for:

Decades of Infrastructure Investment Conference – A score card on Empowerment, Growth and Development in Africa, Chrismar Hotel Livingstone, Zambia, 26-26 September 2014, http://diiconference. Org/committee/

27. Invited Member of the Scientific/Organising Committee for:

2nd International Conference on Sustainable Civil Engineering Structures and Construction Materials (SCESCM)- Toward Better Sustainable Structures and Constructions for Future Generation, 23-25 September 2014, Yogyakarta, Indonesia, http://conference.tsipil.ugm.ac.id/scescm/scientific-committee/

28. Invited Member of the Scientific/Organising Committee for:

BIT’s 3rd Annual International Symposium of Clean Coal Technology. Taiyuan, China. 16-18 September 2014, Clean Coal Technology. http://www.bitcongress.com

29. Invited Member of the Scientific/Organising Committee for:

15th Conference with International Participation-Waste Management-GzO’14, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia, 27-28 August 2014, www.srdit.si/gzo14/1iNFOGzO14ENG.pdf

30. Invited Member of the Scientific/Organising Committee for:

Third (III) International Workshop on Earthquake and Sustainable Materials, Anadolou University, 24 June 2014, Eskişehir, Turkey, under the British Council UK-Turkey Knowledge Partnership. http://iwesm2014.anadolu.edu.tr/en

31. Invited Member of the Scientific/Organising Committee for:

4th Annual International Conference on Civil Engineering, Structural Engineering and Mechanics, 26-29 May 2014, Athens, Greece http://www.atiner.gr/2014/ORG-CIV.htm

Page 22: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 22of72

TECHNICAL / SCIENTIFIC / ADVISORY COMMITTEE MEMBERSHIP (continued..) 32. Invited Member of the Scientific/Organising Committee for:

Algerian Congress of Mechanics, Congrés Algérien de Mécanique, University de Mascara, Algeria, 23-26 November 2013, http://www.cam-dz.org/Call_Appel_cam2013.pdf

33. Invited Member of the Scientific/Organising Committee for:

BIT’s 2nd Annual International Symposium of Clean Coal Technology: Changes from Black to Green. Xi’an, China, Euro Asia Economic Forum. 26-28 September 2013. http://www.bitcongress.com/cct2013/programcommittee.asp

34. Invited Member of the Scientific/Organising Committee for: The First International Conference & Exhibition on “Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Infrastructure”, Ankara-Turkey, 16-18 September 2013. http://www.renewbuild.org/index1.php?page=homepage

35. Invited Member of the Scientific/Organising Committee for:

3rd International Conference on Civil Engineering, 10-13 June 2013, Athens, Greece, Athens Institute for Education and Research, http://www.atiner.gr/2013/ORG-CIV.htm

36. Invited member of the Organising Committee for:

The International Symposium “Modern Challenges of Higher Education and Science in the Field of Chemistry”, [Also celebration in honour of Academician of NAS RK Shaikhutdinov Erengaip Malikovich on the occasion of his 80th Birthday”, 29-31 May 2013, Al-Farabi Kazakh National University, Kazakhstan

37. Invited Member of the Scientific/Organising Committee for: Le 1er Séminaire International de Génie Civil Bechar’ 2013, Université de Bechar, Ministère de l’Enseignement Supérieur et de la Recherche Scientific, Algérie, 6-7 March 2013, http://www.univ-bechar.dz

38. Invited Member of the Scientific/Organising Committee for:

Second (II) International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey, under the British Council UK-Turkey Knowledge Partnership. http://www.iwesm.sakarya.edu.tr/program.html

39. Invited Member of the Scientific/Organising Committee for:

The International conference on “Sustainability Issues in the Built Environment and Construction Materials Technology” (organised by Anglia Ruskin University) in January 2013. (cancelled) http://www.anglia.ac.uk/ruskin/en/home/faculties/fst/departments/builtenv/green_6_conference.html

40. Invited Member of the Scientific Committee for:

The Future Concrete 2012, Organised by Advanced Construction Technology Services (ACTS), Doha, Qatar, 20-21 November 2012. http://www.futureconcrete.com/programs.html

41. Invited Member of the Organising Committee for:

The 1st USM-KAZNU International Conference on “Challenges of Teaching and Chemistry Research in Institutions of Higher Learning”, Organised by Universiti Sains Malaysia & Al-Farabi Kazakh National University Malaysia, 11-13th July 2012.

Page 23: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 23of72

TECHNICAL / SCIENTIFIC / ADVISORY COMMITTEE MEMBERSHIP (continued..)

42. Invited Member of the Scientific/Organising Committee for:

The International Workshop on Earthquake and Sustainable Materials, Organised by Sakarya University, Civil Engineering Department, Turkey, 19th January 2012. http://www.iwesm.sau.edu.tr/?s=s3

43. Invited Member of the Scientific Committee for:

The 2nd International Conference, Future Concrete 2011, Advanced Construction Technology Services, Dubai, 12-14 December 2011 http://www.futureconcrete.com/Committe.html http://www.actsconferences.com/

44. Invited Member of the Scientific Committee for:

The 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June 2010, ISBN 978-1-4507-1490-7 http://www4.uwm.edu/cbu/ancona.html#Committe

45. Invited Member of the Scientific Committee for: Green 5: Construction for a Built Environment, Vilnius, Lithuania, 1-4 July 2008. ISBN 9780415566179 0415566177 http://www.green5.co.uk/committee.html

46. Invited Member of the Scientific Committee for:

International Conference - Excellence in Concrete Construction Through Innovation, 9-10 September 2008, pp 445-452, Limbachiya & Kew (eds), Taylor & Francis Group pub, 2009, ISBN 978-0-415-47592-1. http://www.crcnetbase.com/doi/pdf/10.1201/9780203883440.fmatt

47. Invited Member of the Scientific Committee for:

International Conference on Health and Safety; Village Infrastructure to cope with the Built Environment organized by the Universities of Dakka and Exeter, November 2000

http://groups.exeter.ac.uk/housingandhazards/about%20the%20partners.pdf

Page 24: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 24of72

INVITED KEYNOTE LECTURES/PRESENTATIONS/OTHERS

1. Invited to give a keynote lecture at the 2016 International Conference on Building Materials and Civil Engineering, 10-11 Dec 2016, Wuhan, Hubei, China; http://www.bmce2016.org/committee.html

2. Invited to give a keynote lecture at the ACI-KC 4th International Conference and

Exhibition, Smart, Green and Durable Concrete Structures, March 28-30, 2016, Radisson Blu Hotel, Kuwait, http://www.aci-kw.org/news_ACI_4th_conference.htm

3. Invited to give a keynote lecture at the 23rd Annual International Conference on

Composites/nano Engineering (ICCE-23); 12-18 July 2015, Chengdu, China; http://www.icce-nano.org/

4. Invited to give a keynote lecture at the 2nd International Sustainable Buildings Symposium

(ISBS 2015), 28-30 May 2015, Gazi University, Ankara, Turkey, http://www.isbs2015.gazi.edu.tr

5. Invited to give a keynote lecture at the 3rd International Seminar: Innovation and

Valorisation in Civil Engineering & Construction, INVACO’2014, Houari Boumediene University of Science and Technology, Algiers, Algeria, 17-18 November 2014, http://www.usthb.dz

6. Invited to give a keynote lecture Third (III) International Workshop on Earthquake and

Sustainable Materials, Anadolou University, 24 June 2014, Ankara, Turkey, under the British Council UK-Turkey Knowledge Partnership. http://iwesm2014.anadolu.edu.tr/en

7. Invited to give a keynote lecture at The International Symposium “Modern Challenges of

Higher Education and Science in the Field of Chemistry”, [Also celebration in honour of Academician of NAS RK Shaikhutdinov Erengaip Malikovich on the occasion of his 80th Birthday”, 29-31 May 2013, Al-Farabi Kazakh National University, Kazakhstan

8. Invited to give an expert lecture at the BIT's 1st Annual International Symposium of Clean

Coal Technology 2012 (CCT-2012); Theme: Clean Coal for the Better Tomorrow, 24-26 September 2012, Taiyuan, Shanxi Province, China, http://www.bitcongress.com/cct2012/ 2012

9. Invited to give a keynote lecture an international conference on the use of waste in

construction materials (organised Anglia Ruskin University) in 2013. (cancelled). http://www.aru.ac.uk

10. Invited to give a keynote lecture at International Workshop on Earthquake and

Sustainable Materials, Organised by Sakarya University, Civil Engineering Department, Turkey, 19th January. http://www.iwesm.sau.edu.tr/?s=s3 2012

11. Invited to give a lecture at 2nd International Conference, Future Concrete 2011, Advanced

Construction Technology Services, Dubai, 12-14 December. http://www.actsconferences.com/ 2011

12. Invited to give a keynote lecture at the 12th Structural Engineering Conference, Al Fateh

University, Tripoli, 20-23 November 2011, http://asec12.ly/en/ (2011)

Page 25: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 25of72

13. Invited to give a lecture at the Nineteenth Annual International Conference on Composites/Nano Engineering (ICCE - 19), ICCE-19 Shanghai, China, July 24-30, 2011 , http://www.icce-nano.org/ 2011

14. Invited by Woodhead Publishing Ltd to edit a book entitled “Sustainability of Construction

Materials” in 2007.

15. Invited to give a lecture on the use of novel materials to produce high performance materials at the International conference in Algeria in 2003

16. Invited to give an evening lecture hosted by the Institution of Structural Engineers

(Yorkshire Branch) on the use of metakaolin as cement replacement in Structural Application (2002)

17. Invited to give a lecture on the use of industrial by-products (waste) such as fly ash in

construction applications for lnner Mongolia local representative hosted by the Inner Mongolia University of Science and Technology-China (2001)

CONTINUING PROFESSIONAL DEVELOPMENT/COURSES/TRAINING

1. Environmental Management System (one year-PT)

2. Construction Project Management (~one year PT) 3. Teaching and Learning Course in Higher Education (one year-PT)

4. Research Supervisory Programme (one year-PT)

5. Oil Field Corrosion run by British Petroleum (5 days) 6. Numerous conferences

7. Numerous courses/workshops/online events /site visits run by (see below) and

others:

(a) Concrete Centre (CC); (b) Concrete Society (CS) (c) Higher Education Academy (HEA) (d) Institution of Civil Engineers (ICE) (e) Institution of Structural Engineers (IStructE) (f) Higher Education Academy (HEA) (g) West Midlands Centre for Constructing Excellence (WMCCE)

8. Various other courses: (a) Health and Safety, First Aid (b) Basic and Advanced Excel, Microsoft Word and Access (database software) (c) Presentation/Teaching skills (d) Blended learning (e) Quality Assurance

Page 26: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 26of72

LIST OF PUBLICATIONS ISI Web of Science H-index: 16 Scopus H-index: 18 Microsoft G-Index: 18 Citation (Google) web link: http://scholar.google.com/citations?hl=en&user=eRDOWn8AAAAJ

All Since 2010 Citation 2803 1760 H-index 24 19 i10-index 36 31 REFEREED JOURNALS 1. P S Mangat and J M el-Khatib (1992) “Influence of Initial Curing on Sulphate

Resistance of blended Cement Concrete”, Cement and Concrete Research Journal, Vol. 22, No. 6, November 1992, pp1089-1100. ISSN: 0008-8846

[Cited 54 times google scholar] http://scholar.google.co.uk/scholar?q=Khatib+Mangat+sulphate&hl=en&as_sdt=1%2C5&as_sdtp=on

2. P S Mangat, J M el-Khatib and B T Molloy (1994) “Microstructure, Chloride Diffusion

and Reinforcement Corrosion in Blended Paste and Concrete”, Journal of Cement and Concrete Composites, Vol.16, 1994, pp 73-81. ISSN: 0958-9456

[Cited 27 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+molloy+mangat+concrete+corrosion&as_sdt=0%2C5&as_ylo=&as_vis=0

3. S Wild, M Hadi and J M Khatib (1995) “The Influence of Gypsum Content on the

Porosity and Pore Size Distribution of Cured PFA-Lime Mixes”, Advances in Cement Research Journal, Vol.7, No.26, Apr 1995, pp 47-55. ISSN: 0951-7197

4. P S Mangat and J M Khatib (1995) “Influence of Fly Ash, Silica Fume and Slag on

Sulphate Resistance of Concrete”, American Concrete Institute-Materials Journal, Vol.92, No.5, 1995, pp 542-552.

[Cited 65 times google scholar] http://scholar.google.co.uk/scholar?q=Khatib+Mangat+sulphate&hl=en&as_sdt=1%2C5&as_sdtp=on

5. J M Khatib and P S Mangat (1995) “Absorption Characteristics of Concrete as a

Function of Location Relative to the Casting Position”, Cement and Concrete Research Journal, Vol.25, No.5, July 1995, pp 999-1010. ISSN: 0008-8846

[Cited 34 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+mangat+concrete+absorption&as_sdt=0%2C5&as_ylo=&as_vis=0

6. S Wild, B B Sabir and J M Khatib (1995) “Factors Influencing Strength Development

of Concrete Containing Silica Fume”, Cement and Concrete Research Journal, Vol.25, No.7, September 1995, pp 1567-1580. ISSN: 0008-8846

[Cited 56 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+sabir+wild+silica+fume&as_sdt=0%2C5&as_ylo=&as_vis=0

Page 27: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 27of72

7. S Wild, J M Khatib and A Jones (1996) “Relative Strength, Pozzolanic Activity and Cement Hydration in Superplasticised Metakaolin Concrete”, Cement and Concrete Research Journal, Vol.16, No.10, 1996, pp 1537-1544. ISSN: 0008-8846

[Cited 267 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+j+relative+strength&as_sdt=0%2C5&as_ylo=&as_vis=0

8. J M Khatib and S Wild (1996) “Pore Size Distribution of Metakaolin Paste”, Cement

and Concrete Research Journal. Vol.26, No.10, 1996, pp 1545-1553. ISSN: 0008-8846 [Cited 190 times google scholar]

http://scholar.google.co.uk/scholar?hl=en&as_sdt=0,5&q=Khatib+j+pore+size+distribution

9. S Wild and J M Khatib (1997) “Portlandite Consumption in Metakaolin Cement Pastes and Mortars”, Cement and Concrete Research Journal. Vol.27, No.1, 1997, pp 137-146. ISSN: 0008-8846

[Cited 116 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+j+portlandite&as_sdt=0%2C5&as_ylo=&as_vis=0

10. S Wild , J M Khatib and M O’Farrell (1997) “Sulphate Resistance of Mortar

Containing Ground Brick Clay Calcined at Different Temperatures”, Cement and Concrete Research Journal, Vol.27, No.5, 1997, pp 697-709. ISSN: 0008-8846

[Cited 35 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+wild+farrell+sulphate&as_sdt=0%2C5&as_ylo=&as_vis=0

11. J M Khatib and S Wild (1998) “Sulphate Resistance of Metakaolin Mortar”, Cement

and Concrete Research Journal, 1998, Vol. 28, No. 1, pp 83-92. ISSN: 0008-8846 [Cited 106 times google scholar]

http://scholar.google.co.uk/scholar?q=Khatib+j+Sulphate&hl=en&as_sdt=1%2C5&as_sdtp=on 12. S Wild, J M Khatib and L Roose (1998) “Chemical and Autogenous Shrinkage of

Metakaolin Paste”, Advances in Cement Research Journal, 1998, Vol 10, No 3, 1998, pp 1-11. ISSN: 0951-7197

[Cited 50 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=chemical+shrinkage+autogenous+shrinkage+wild+khatib&as_sdt=0%2C5&as_ylo=&as_vis=0

13. J M Khatib and P S Mangat (1999) “Influence of Superplasticiser and Curing on

Porosity and Pore Structure of Cement Paste”, Journal of Cement and Concrete Composites, December 1999, Vol. 21, pp 431-437. ISSN: 0958-9456

[Cited 36 times google scholar]

http://scholar.google.co.uk/scholar?hl=en&as_sdt=0,5&q=Khatib+mangat+superplasticizer 14. J M Khatib and P S Mangat (2000) “Porosity and Pore Size Distribution of Cement

Paste Exposed to Different Curing Regimes – Influence of Superplasticizer”, L’industria Italiana del Cemento Journal, No. 750 – iiC, January 2000, pp 76 – 83.

15. J M Khatib and P S Mangat (2002) “Influence of High Temperature and Low

Humidity Curing on Chloride Penetration in Blended Cement Concrete”, Cement and Concrete Research Journal, Vol 32, No. 11, 2002, pp 1743-1753. ISSN: 0008-8846

[Cited 21 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+mangat+curing+chloride&as_sdt=0%2C5&as_ylo=&as_vis=0

Page 28: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 28of72

16. J M Khatib and P S Mangat (2003) “Porosity of Cement Paste Cured at 45°C as a Function of Location Relative to Casting Position”, Journal of Cement and Concrete Composites, Vol 25, No 1, 2003, pp 97-108.

[Cited 18 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+mangat+porosity+location+cement+paste&as_sdt=0%2C5&as_ylo=&as_vis=0

17. J M Khatib and P S Mangat (2003), A reply to the discussion by M. Collepardi of the

paper, “Influence of High Temperature and Low Humidity Curing on Chloride Penetration in Blended Cement Concrete”, Cement and Concrete Research Journal , Vol. 33, 2003, pp 1705-1706. ISSN: 0008-8846 doi: 10.1016/S0008-8846(03)00134-0

18. J M Khatib and R Clay (2004) “Absorption Characteristics of Metakaolin Concrete”,

Cement and Concrete Research Journal, Vol. 34, No. 1, 2004, pp 19-29. ISSN: 0008-8846 doi: 10.1016/S0008-8846(03)00188-1

[Cited 70 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=Khatib+j+absorption&as_sdt=0%2C5&as_ylo=&as_vis=0

19. J M Khatib (2005) “Properties of Concrete Containing Fine Recycled Aggregates”,

Cement and Concrete Research Journal, Vol. 35, No. 4, April 2005, pp 763-769. ISSN: 0008-8846 doi: 10.1016/j.cemconres.2004.06.017

[Top 25 articles; 13/25 Oct-Dec05 5/25 Apr-Jun05] [Cited 219 times google scholar] http://top25.sciencedirect.com/index.php?cat_id=4&subject_area_id=12&journal_id=00088846

20. J M Khatib and J J Hibbert (2005) “Selected Engineering Properties of Concrete

Incorporating Slag and Metakaolin”, Construction and Building Materials Journal, Vol. 19, No. 6, July 2005, pp 460-472. ISSN 0950-0618 doi: 10.1016/j.conbuildmat.2004.07.017

[Top 25 articles; 15/25 Oct-Dec05 5/25 Apr-Jun05] [Cited 61 times google scholar] http://top25.sciencedirect.com/index.php?cat_id=6&subject_area_id=12&journal_id=09500618

21. J Zhang, J M Khatib, C Yan (2006) “The Study of Mechanical and Durability

Properties of Bricks Made with Different Fly Ashes”, New Building Materials Journal, In Chinese, June 2006, pp 17-21.

22. P S Mangat, J M Khatib and L Wright (2006) "Optimum Utilisation of Flue Gas

Desulphurisation (FGD) Waste in Blended Binder for Concrete", Construction Materials Journal - Proceedings of the Institution of Civil Engineers. Vol 1, No. 2, August 2006, pp 60-68. ISNN 1747-650X

23. J M Khatib and A Blagden (2006) "Has Adjudication been Accepted as an Effective

Form of Dispute Resolution within the UK Construction Industry", Construction Information Quarterly Journal , CIOB, December 2006, Issue 4, pp 181-184.

24. J M Khatib, N. Chileshe, S. Sloan (2007) “Antecedents and Benefits of 3D and 4D

Modelling for Construction Planners”, Journal of Engineering, Design and Technology, 2007, Vol 5, Issue 2, pp 159-172. ISSN: 1726-0531, DOI: 10.1108/17260530710833202

25. A.O. Coker, R.A. Adeshiyan, J.R. Oluremi, M.K. Sridhar, M.E. Coker, C.A. Booth and

J M Khatib (2008) “Challenges of Waste and Facilities Management in a Nigerian Leper Colony”, International Journal of Environmental Studies, April 2008, Vol 65, No. 2, pp 177-189. ISSN 0020-7233 print ISSN 1029-0400 online doi: 10.1080/00207230701831202

Page 29: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 29of72

26. J M Khatib (2008) “Metakaolin Concrete at a Low Water to Binder Ratio”, Construction and Building Materials Journal, August 2008, Vol 22, Issue 8, pp 1691-1700. ISSN 0950-0618 doi: 10.1016/j.conbuildmat.2007.06.003

[Cited 30 times google scholar] http://scholar.google.co.uk/scholar?start=20&q=khatib+j+concrete&hl=en&as_sdt=0,5

27. J M Khatib (2008) “Performance of Self-Compacting Concrete Containing Fly Ash”,

Construction and Building Materials Journal, September 2008, Vol 22, Issue 9, pp 1963-1971. ISSN 0950-0618 doi: 10.1016/j.conbuildmat.2007.07.011

[Top 25 articles; 3/25 Jul-Sep08, 5/25 Apr-Jun08, 11/25 Oct-Dec07] [Cited 87 times google scholar] http://top25.sciencedirect.com/subject/materials-science/15/journal/construction-and-building-materials/09500618/archive/19/

http://scholar.google.co.uk/scholar?hl=en&q=Khatib+j+self+compacting+concrete&as_sdt=0%2C5&as_ylo=&as_vis=0

28. O Kayali, M Naseer Haque, J M Khatib (2008) “Sustainability and Emerging Concrete Materials and their Relevance to the Middle East”, The Open Construction and Building Technology Journal, Vol 2, 2008, pp 103-110, ISSN: 1874-8368

29. R Siddique, J M Khatib and I Kaur (2008) “Use of Waste Recycled Plastic in

Concrete: A review”, Journal of Waste Management, Vol 28, No 10, 2008, pp 1835-1852, ISSN 0956-053X doi: 10.1016/j.wasman.2007.09.011

[Top 25 articles; 1/25 Jul-Sep08, 3/25 Oct-Dec08] [Cited 187 times google scholar] http://top25.sciencedirect.com/subject/environmental-science/13/journal/waste-management/0956053X/archive/19/ http://top25.sciencedirect.com/subject/environmental-science/13/journal/waste-management/0956053X/archive/20/

http://scholar.google.co.uk/scholar?hl=en&q=Khatib+j+waste+plastic&as_sdt=0%2C5&as_ylo=&as_vis=0

30. J M Khatib, P S Mangat and L Wright (2008) "Sulphate Resistance of Blended

Binders Containing FGD Waste ", Construction Materials Journal - Proceedings of the Institution of Civil Engineers (ICE), Vol 161, Issue CM3, August 2008, pp 119-128. ISNN 1747-650X doi: 10.1680/coma.2008.161.3.119

31. J Zhang and J M Khatib (2008) “Using wheat husk ash in the production of a

sustainable construction material”, Real Estate and Development Economics Research (READER) Journal, Vol. 1, No. 1, pp 18-29, September, 2008, print ISSN 1754-3517 online ISSN 1754-3525 CDROM ISSN 1754-3533

32. B Medani, S Kenai, J M Khatib and A Ait-Mokhtar (2009) “Strength and Durability of

Concrete Incorporating Crushed Limestone Sand”, Construction and Building Materials Journal, February 2009, Vol 23, Issue 2, pp 625-633 ISSN 0950-0618, doi:10.1016/j.conbuildmat.2008.02.005

[Top 25 articles; 8/25 Oct-Dec08] [Cited 15 times google scholar] http://top25.sciencedirect.com/subject/engineering/12/journal/construction-and-building-materials/09500618/archive/20/

33. J M Khatib (2009) "Low curing Temperature of Metakaolin Concrete", American

Society of Civil Engineers (ASCE) - Materials in Civil Engineering Journal, Vol 21, No. 8, August, pp 362-367, ISSN 0899-1561/2009/8-362-367 DOI: 10.1061/(ASCE)0899-1561(2009)21:8(362)

34. J M Khatib, O Kayali and R Siddique (2009) “Strength and Dimensional Stability of

Cement-Fly Ash-Metakaolin Mortar”, American Society of Civil Engineers (ASCE) - Materials in Civil Engineering Journal, Vol. 21, No. 9, September, pp 523-528, ISSN 0899-1561/2009/9-523-528, DOI: 10.1061/(ASCE)0899-1561(2009)21:9(523), CODEN: JMCEE7

35. R Siddique and J M Khatib (2010) “Mechanical properties and Abrasion Resistance

of HVFA Concrete”, Materials and Structures - RILEM Journal, Vol 43, No 5, June 2010, pp 709-718. print ISSN: 1359-5997 online ISSN 1871-6873 doi: 10.1617/s11527-009-9523-x

[Cited 11 times google scholar]

Page 30: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 30of72

36. E M Negim, M Ramli, J M Khatib, B Saad, M I Saleh (2010), “Synthesis and

Characterization of Hydrophilic Copolymers as Superplaticizers for cement Pastes”, World Applied Sciences Journal, Vol 10, No 6, pp 685-694. ISSN : 1818-4952 http://idosi.org/wasj/wasj.htm

37. G True, D Searle, L Sear, J M Khatib (2010), “Voidage Assessment of Concrete

Using Digital Image Processing”, Magazine of Concrete Research, Vol 62, No. 12, December, pp 857-868, ISSN 0024-9831, doi: 10.1680/macr.2010.62.12.857

38. J M Khatib, B A Herki (2011), “Capillary Water Absorption of Concrete Containing

Waste Foundry Sand”, Concrete Plant International (CPI) Magazine, October, No. 5, pp 50-53, ISSN 1437-9023, www.cpi-worldwide.net

39. E M Negim, M Ramli, B Saad J M Khatib, L Bekbayeva, M Shalash, M I Saleh

(2011), “Effect of Acrylate Copolymers on the Rheological Properties of Cement Pastes, Part II”, Middle-East Journal of Scientific Research, Vol 9, No 1, pp 8-16. ISSN : 1990-9233 http://www.wassj.org www. Idosi.org

40. J M Khatib, B A Herki, S Firat, B Menadi, S Kenai (2011), “Capillarity of Concrete

Incorporating Foundry Sand a Replacement of Sand”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4, pp 1224-1230, ISSN:1306-3111, ISSN: 1308-7231, Article No. 1A0203, www.newwsa.com.

41. J M Khatib, L Wright and P S Mangat (2011), “External Chemical Shrinkage of

Pastes Containing Flue Gas Desulphurisation (FGD) Waste”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4, pp 1669-1675, ISSN:1306-3111, ISSN: 1308-7231, Article No. 1A0272, www.newwsa.com.

42. J M Khatib, L Wright and P S Mangat (2011), “Influence of Incorporating Flue Gas

Desulphurisation (FGD) Residues on Porosity and Pore Size Distribution of Cement Paste”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4, pp 1676-1682, ISSN:1306-3111, ISSN: 1308-7231, Article No. 1A0273, www.newwsa.com.

43. A O Coker, J R Oluremi, R A Adeshiyan, M K Sridhar, M E Coker, C A Booth, J A

Millington, J M Khatib (2011), “Wastewater Management in a Nigerian Colony”, Journal of Environmental Engineering and Landscape Management, Vol 19, Issue 3, 2011, pp 260-269, DOI: 10.3846/16486897.2011.603500, ISSN 1648-6897 ISSN 1822-4199 online,

44. J M Khatib, A Shaaban, S Negim, S Kenai (2011), “The Capillarity of Self-

Compacting Concrete Incorporating Fly Ash”, Journal of Concrete Plant International, South African Journal for the Concrete Industry, pp54-60, Issue 6 (December), ISSN 1437-9023, www.cpi-worldwide.net

45. J M Khatib, S Negim, M Tarek Uddin (2012), “New Generation Water-Reducing

Admixture for Concrete”, The Master Builder, Indian Premier Construction Magazine, Vol 14, No 1, pp 142-149, January 2012, http://www.masterbuilder.co.in/

46. J M Khatib, S Baig, A Bougara, E S Negim, S Kenai (2012), “Utilisation of Foundry

Sand in Concrete Production”, The Master Builder, Indian Premier Construction Magazine, Vol 14, No 1, pp 244-246, January 2012, http://www.masterbuilder.co.in/

Page 31: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 31of72

47. A Hadjsadok, S Kenai, L Courard, F Michel and J M Khatib (2012), “Durability of Mortar and Concretes Containing Slag with Low Hydraulic Activity”, Journal of Cement and Concrete Composites, Vol 34, Issue 5, May 2012, pp 671-677, ISSN 0958-9465. doi:10.1016/j.cemconcomp.2012.02.011

48. E M Negim, J M Khatib, K Al Mutairi, R Raikhan, M A Grigoriy (2012), “The Effect of

Molar ratios of the Monomers on the Physico-Mechanical Properties of Portland Cement”, Middle-East Journal of Scientific Research, Vol 11, No 8, pp 1131-1139. ISSN : 1990-9233 http://www.wassj.org www. Idosi.org

49. J M Khatib, S Shariff, ES M Negim (2012), “Effect of Incorporating Foamed glass on

the Flexural Behaviour of Reinforced Concrete Beams”, World Applied Sciences Journal, Vol 19, No 1, pp 47-51, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2012.19.01.2763

50. E S Negim, J M Khatib, M M Mohammed, S K Kerimbaevna (2012), “The Effect of

Molar ratios of the Monomers on the Physico-Mechanical Properties of Portland Cement Mortar”, World Applied Sciences Journal, Vol 19, No 6, pp 832-837. ISSN 1818-4952, DOI: 10-5829/idosi.wasj.2012.19.06.2773

51. J M Khatib, L Wright, P S Mangat, E M Negim (2012), “Porosity and Pore Size

Distribution of Well Hydrated Cement-Fly Ash- Gypsum Pastes”, American-Eurasian Journal of Scientific Research, Vol 7, No 4, pp 142-145. ISSN 1818-6785, DOI: 10.5829/idosi.aejsr.2012.7.4.65131

52. J M Khatib, E M Negim, H S Sohl, N Chileshe (2012), Glass Powder Utilisation in

Concrete Production, European Journal of Applied Sciences, Vol 4, No 4, pp 173-176, ISSN 2079-2077, DOI; 10.5829/idosi.ejas.2012.4.4.1102

53. J M Khatib, E M Negim, E Gjonbalaj (2012), “High Volume Metakaolin as cement

Replacement in Mortar”, World Journal of Chemistry, Vol 7, No 1, pp 7-10, DOI: 10.5829/idosi.wjc.2012.7.1.251 http://idosi.org/wjc/7(1)12/2.pdf

54. N Chileshe, J M Khatib and M Farah (2013), “The Perceptions of Tenants in the

Refurbishment of Tower Blocks”, Facilities Journal, Emerald Publishing, Vol 31, Issue 3-4, pp 119-137. ISSN: 0263-2772 DOI: 10.1108/02632771311299403

55. A B Herki, J M Khatib, E M Negim (2013), “Lightweight Concrete Made from Waste

Polystyrene and Fly Ash”, World Applied Sciences Journal, Vol 21, No 9, pp 1356-1360, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2013.21.9.20213

56. C Egenti, JM Khatib, D Oloke (2013), “Appropriate Design and Construction of Earth

Buildings: Contesting Issues of Protection Against Cost”, African Journal of Basic & Applied Sciences, Vol 5, No 2, pp 102-106, ISSN 2079-2034 DOI: 10. 5829/idosi.ajbas.2013.5.2.1130

57. J M Khatib, L Wright, P S Mangat (2013), “Effect of fly ash-gypsum blend on porosity

and pore size distribution of cement pastes”, Journal of Advances in Applied Ceramics, Structural, Functional and Bioceramics, Vol 112, No. 4, pp 197-201, online, ISSN 17436753, DOI: 10.1179/1743676112Y.0000000032

58. E M Negim, J M Khatib, N O Inkarbekov (2013), “Effect of Acrylate Copolymers on

the Rheological Properties of Cement Pastes, Part III”, World Applied Science Journal, Vol 23, No 4, pp 549-553. ISSN : 1818-4952 DOI: 10.5829/idosi.wasj.2013.23.04.13084

Page 32: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 32of72

59. J M Khatib, A B Herki, S Kenai (2013), “Capillarity of Concrete Containing Foundry

Sand”, Journal of Construction and Building Materials, Vol 47, October, pp 867-871, Elsevier http://dx.doi.org/10.1016/j.conbuildmat.2013.05.013,

60. B.A. Herki, J.M. Khatib (2013) “Lightweight Concrete Incorporating Waste

Expanded Polystyrene”, Advanced Materials Research Journal, Vol. 787, pp 131-137, Trans Tech Publications, Switzerland, ISBN print: 978-3-03785-802-8, doi:10.4028/www.scientific.net/AMR.787.131

61. N Chileshe, J M Khatib and M Farah (2013), “The perceptions of Contractor’s and

Landlord’s Representatives in the refurbishment of Tower Blocks”, Facilities Journal, Emerald Group Publishing, Vol 31, No. 11/12, pp 521-541, ISSN: 0263-2772 DOI: 10.1108/F-02-2012-0008

62. E S M Negim, J M Khatib, E Faizova, S Shilibekov, S Mussylmanbek (2013), “The Effect of Diamine Extender on the Properties of Polyurethane Dispersions”, Middle-East Journal of Scientific Research, Vol 16, No 7, pp 890-895, www.idosi.org ISSN 1990-9233 DOI: 10.5829/idosi.mejsr.2013.16.07.11936

63. E S M Negim, J M Khatib, G Zh Yeligbayeva, R Rakhmetullayeva, P I Urkimbaeva, M Sakhy, S Shilibekov, G A Mun, (2013), “Synthesis, Characterization and Application of Hydrophilic Copolymers on Physico-mechanical Properties of Cement Pastes”, World Applied Sciences Journal, Vol 25, No. 5, pp 1044-1052, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2013.25.07.13379

64. J M Khatib, P S Mangat, L Wright (2013), “Early Age Porosity and Pore Size

Distribution of Cement paste with Flue Gas Desulphurisation (FGD) Waste”, Journal of Civil Engineering and Management, Vol 19, No 5, pp 622-627, Taylor and Francis, ISSN 1392-3730 print/ISSN 1822-3605 online, doi: 10.3846/13923730.2013.793609

65. M Sonebi, W Schmidt, J M Khatib (2013), “Influence of the Type of Viscosity-

modifying Admixtures and Metakaolin on the Rheology of Grouts”, Chemistry and Materials Research Journal, Vol 5, pp 106-111. ISSN 2225-0956 http://www.iiste.org/Journals/index.php/CMR/index

66. B Menadi, S Kenai and J M Khatib (2014), “Fracture Behaviour of Concrete Containing Limestone Fines”, Proceedings of the ICE; Construction Materials Journal -, Vol 167, Issue 3, pp 162-170, June 2014, Paper 1200041 DOI: 10.1680/coma.12.00041.

67. S Kenai, B Menadi and J M Khatib (2014), “Sustainable Construction and Low

Carbon Dioxide Concrete: Algeria Case Review”, Proceedings of the ICE; Engineering Sustainability Journal. Vol 167, Issue 2, pp 45-52, April 2014, ISSN: 1478-4629 DOI: 10.1680/ensu.12.00024

68. J M Khatib (2014), “Effect of Initial Curing on Absorption and Pore Size Distribution

of Paste and Concrete Containing Slag”, Korean Society of Civil Engineers (KSCE) Journal , Vol 18, Issue 1, pp 264-272 January. pISSN 1226-7988, eISSN 1976-3808 DOI 10.1007/s12205-014-0449-7

Page 33: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 33of72

69. N Zhansaya, E S M Negim, A M Rauash, J M Khatib, G A Mun, C Williams (2014), Effect of pH on the physico-mechanical properties and miscibility of MC/PAA blends, Carbohydrate Polymers Journal, Elsevier, Vol 101, pp 415-422, http://dx.doi.org/10.1016/j.carbpol.2013.09.047

70. El-Sayed M. Negim, J.M. Khatib, M. Sakhy, S. Shilibekov, N. Shanshabayev, B.

Jakiyayev (2014), “The Effect of pH on Physico-Mechanical Properties of Cement Pastes Containing Poly (Acrylate) Latexes -Chemical Admixtures”, World Applied Sciences Journal, Vol 29, No 6, pp 796-804, ISSN 1818-4952

71. B Menadi, S Kenai, S Hammat, J M Khatib (2014), “The Influence of the Fineness of Mineral Additions on Strength and Drying Shrinkage of Self-Compacting Mortars”, Key Engineering Materials Journal, Vol. 600, pp 367-374, Trans Tech Publications, Switzerland, ISSN: 1662-9795 doi:10.4028/www.scientific.net/KEM.600.367

72. J M Khatib, E M Negim, G Zh Yeligbayeva, G A Mun (2014), “Strength characteristics of mortar containing high volume metakaolin as cement replacement”, Research and Reviews in Materials Science and Chemistry Journal, Vol 3, Issue 1, pp 85-95, Jyoti Academic Press, ISSN: 2319-6920, www.jyotiacademicpress.net

73. J M Khatib, P S Mangat, L Wright (2014), “Pore Size Distribution of Cement pastes Containing Fly Ash-Gypsum Blends Cured for 7 Days”, Korean Society of Civil Engineering (KSCE) Journal, Vol 18, No 4, pp 1091-1096,; DOI: 10.1007/s12205-014-0136-8 Online ISSN: 1976-3808; Print ISSN: 1226-7988

74. El-Sayed Negim, Latipa Kozhamzharova, Jamal Khatib, Lyazzat Bekbayeva, and

Craig Williams (2014), “Effects of Surfactants on the Properties of Mortar Containing Styrene/Methacrylate Superplasticizer,” The Scientific World Journal, Vol. 2014, Article ID 942978, 10 pages. doi:10.1155/2014/942978

75. D Boucherit, S Kenai, E Kadri, J M Khatib (2014), “A Simplified Approach for the

Prediction of Long Term Concrete Drying Shrinkage”, Korean Society of Civil Engineering (KSCE) Journal, Vol 18, No. 4, pp 2196-2208, DOI: 10.1007/s12205-014-0168-0 Online ISSN: 1976-3808; Print ISSN: 1226-7988

76. C Egenti, J M Khatib, D Oloke (2014), “Conceptualisation and Pilot Study of Shelled

Compressed Earth Block for Sustainable Housing in Nigeria”, International Journal of Sustainable Built Environment, Vol 3, No. 1, June, pp 72-86, ISSN: 2212-6090, DOI: 10.1016/j.ijsbe.2014.05.002, http://www.journals.elsevier.com/international-journal-of-sustainable-built-environment/

77. E S M Negim, R K Rakhmetullayeva, G Zh Yeligbayeva, P I Urkimbaeva, S T Primzharova, D B Kaldybekov, J M Khatib, G A Mun, C Williams (2014) “Improving biodegradability of polyvinyl alcohol/starch blend films for packaging applications”, International Journal of Basic and Applied Sciences, Vol 3, No. 3, pp 263-273, Science Publishing Corporation, www.sciencepubco.com/index.php/IJBAS, doi: 10.14419/ijbas.v3i3.2842

78. K. Ontürka, S. Firat, I. Vural, J. M. Khatib (2014), “Improvement of Road Sub-base

Fill by Using Waste Marble Dust and Fly Ash”, Journal of Polytechnic, Vol. 17, No. 1 (Special Issue), pp.35-42, (in Turkish), DOI : 10.2339/2014.17 Sayı 1, 35-42 ISSN: 2147-9429 http://www.politeknik.gazi.edu.tr/index.php/PLT/issue/view/71

Page 34: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 34of72

79. El-Sayed Negim, Latipa Kozhamzharova, Yeligbaeva Gulzhakhan, Jamal Khatib, C. Williams, and Lyazzat Bekbayeva (2014), “Effect of copolymer latexes on physico-mechanical properties of mortar containing high volume fly ash as a replacement material of cement”, The Scientific World Journal, Vol 2014, Article ID 670710, 11 pages, 31August2014 http://www.hindawi.com/journals/tswj/aip/670710/

80. K Henni-Chebra, A Bougara, J M Khatib (2014), “Using Metal Plates for

Measurement of Cement Dust Emission”, Proceedings of the ICE; Engineering Sustainability Journal. Vol 167, Issue 5, pp 208-215, October 2014, ISSN: 1751-7680 DOI: 10.1680/ensu.14.00004

81. E.S.M Negim, A.M.B Aisha, U. Yessimkanova, A. Kurmanbekova, K. Tyazhina, P.I.

Urkimbaeva, R.K. Rakhmetullayeva, E. Shatabayeva, G. Irmukhametova, G.A. Mun, G.Zh. Yeligbayeva, J.M. Khatib (2015), “The effect of terpolymer admixtures on physico-mechanical properties of cement pastes”, International Journal of Basic and Applied Sciences, Vol. 4, No 1, pp10-18, Science Publishing Corporation; doi: 10.14419/ijbas.v4i1.3807; www.sciencepubco.com/index.php/IJBAS

82. G True, D Searle, J M Khatib (2015), “Digital imaging 2D and 3D particle assessment using a flat-bed scanner, Magazine of Concrete Research, Vol. 67, No. 19, pp 1033-1047. DOI: 10.1680/macr.14.00352

83. M. Sonebi, E. Garcia-Taengua, K.M.A. Hossain, J. M. Khatib, M. Lachemi (2015),

“Effect of nanosilica addition on the fresh properties and shrinkage of mortars with fly ash and superplasticizer”, Construction and Building Materials Journal, 1 June 2015, Vol 84, pp 269-276; doi:10.1016/j.conbuildmat.2015.02.064

84. E. García-Taengua, M. Sonebi, K.M.A. Hossain, M. Lachemi, J. M. Khatib (2015),

“Effects of the addition of nanosilica on the rheology, hydration and development of compressive strength of cement mortars”, Journal-Composites Part B: Engineering, Vol. 81, pp 120-129. doi:10.1016/j.compositesb.2015.07.009

85. O Ahiakwo, D Oloke, S Suresh, J M Khatib (2015), “Implementing the last plannerTM

system in a road construction project in Nigeria”, Built Environment Journal, Vol 12, No. 2, July, pp 33-49, ISSN 1675-5022

86. C. Egenti, J. M. Khatib (2015). “Behaviour of Shelled Compressed Earth Masonry

Unit under Load”. International Journal of Civil and Structural Engineering Research, Vol 3, No. 2, pp 70-73. http://www.researchpublish.com/download.php?file=Behaviour%20of%20Shelled-2537.pdf&act=book.

87. C Egenti, J. M. Khatib, D. Oloke (2015). High Carbon Fly ash and Soil in Shelled Compressed Earth Masonry Units. International Journal of Interdisciplinary Research and Innovations, Vol. 3, No. 4, pp 61-65.

http://www.researchpublish.com/download.php?file=High%20Carbon%20Fly%20ash-2464.pdf&act=book. 88. C. Egenti, J. M. Khatib, D Oloke, S Firat (2015). “Earth Wall Construction in the

context of the Eurocode”. International Journal of Engineering Research and Reviews, Vol 3. No. 4, pp 27-30.

http://www.researchpublish.com/download.php?file=Earth%20Wall%20Construction-2458.pdf&act=book.

Page 35: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 35of72

89. C. Egenti, J. M. Khatib (2015). Strain in Compressed Earth Block with Increase in Stress. International Journal of Civil and Structural Engineering Research, Vol. 3, No. 2, pp 58-61.

http://www.researchpublish.com/download.php?file=Strain%20in%20Compressed%20Earth%20Block-2475.pdf&act=book.

90. C. Egenti, J M Khatib, E. Negim (2015). “Performance of Compressed Earth

Masonry Units in comparison with the prevailing Sand-Cement Wall Construction in Nigeria”. International Journal of Engineering Research and Reviews, Vol. 3, No. 4, pp 37-41.

http://www.researchpublish.com/download.php?file=Performance%20of%20Compressed%20Earth%20Brick-2542.pdf&act=book.

91. Oriyomi M Okeyinka; David A Oloke; Jamal M Khatib (2015), “A Review on

Recycled Use of Solid Wastes in Building Materials”, International Journal of Civil, Environmental, Construction and Architectural Engineering, Vol. 9, No. 12, pp1469-1478, World Academy of Science, Engineering and Technology (WASET), scholar.waset.org/1999.3/10003128

92. J M Khatib, A Jefimiuk, S Khatib (2015), “Flexural behaviour of reinforced concrete

beams containing expanded glass as lightweight aggregates”, Slovak Journal of Civil Engineering, Vol. 23, No. 4, pp 1-7, De Gruyter Publishing, DOI: 10.1515/sjce-2015-007, http://www.svf.stuba.sk/generate_page.php?page_id=2075 ISSN: 1210-3896

93. Bengin Masih Awdel Herki, Jamal M Khatib (2016), “Structural behaviour of reinforced concrete beams containing a novel lightweight aggregate”, International Journal of Structural Engineering, Vol. 7, No. 1, pp 1-30, Inderscience publishers (IEL), DOI: 10.1504/IJSTRUCTE.2016.073676

94. Deinsam D Ogan, Issaka E Ndekugri, Chike F Oduoza, Jamal M Khatib (2016),

Principles for developing an effective framework to control minerals and rocks extraction impacts, mitigate waste and optimise sustainable quarries management, Resources Policy Journal, Vol 47, pp 146-170, http://dx.doi.org/10.1016/j.resourpol.2016.01.004

95. H S Abdelgader, J Gorski, J M Khatib, A S El-Baden (2016), “Two-stage concrete: Effect of silica fume and superplasticizers on strength”, BFT International, Concrete Technology, Science and Research, March 2016, pp 38-47, www.bft-international.com

96. J M Khatib, L Wright, P S Mangat (2016), “Mechanical and physical properties of concrete containing FGD waste”, Magazine of Concrete Research, Article number: MACR-D-15-00092, DOI: 10.1680/macr.15.00092 (In Press)

97. J M Khatib, L Wright, P S Mangat (2016), "Effect of desulphurised waste on long-

term porosity and pore structure of blended cement pastes”, Sustainable Environment Research Journal, Manuscript ID SER2014-082; http://ser.cienve.org.tw (In Press)

98. B A Herki, J M Khatib (2016), “Valorisation of waste expanded clay polystyrene in concrete using a novel recycling technique”, European Journal of Environmental and Civil Engineering, Taylor & Francis pub, http://dx.doi.org/10.1080/19648189.2016.1170729

Page 36: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 36of72

99. J M Khatib, S Wild, R Siddique, S Kenai (2016), “Heat Evolution and Temperature Rise of Metakaolin Mortar”, Journal (to be submitted).

Page 37: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 37of72

REFEREED CONFERENCE PAPERS 100. P S Mangat and J M el-Khatib (1992) “Influence of Initial Curing on Pore Structure

and Porosity of Blended Cement Concrete”, American Concrete Institute SP-132, Proceedings 4th International Conference on Fly ash, Slag and Natural Pozzolans in Concrete (Ed: V M Malhotra), Vol.1, May 1992, pp 813-833.

[Cited 12 times google scholar] http://scholar.google.com/citations?hl=en&user=eRDOWn8AAAAJ&view_op=list_works&pagesize=100

101. J M Khatib, B B Sabir and S Wild (1996) “Some properties of Metakaolin Paste and

Mortar”, International Conference Concrete in the Service of Mankind: Concrete for Environment Enhancement and Protection, (Eds. R K Dhir and T D Dyer), Dundee, 24-28 June 1996, pp 637-643. ISBN 0-419-21450-x

[Cited 13 times google scholar] http://scholar.google.co.uk/scholar?start=10&q=khatib+j+concrete+metakaolin&hl=en&as_sdt=0,5

102. B B Sabir, S Wild and J M Khatib (1996) “On the Workability and Strength

Development of Metakaolin Concrete” International Conference - Concrete in the Service of Mankind: Concrete for Environment Enhancement and Protection, (Eds. R K Dhir and T D Dyer), Dundee, 24-28 June 1996, pp 651-662. ISBN 0-419-21450-x

[Cited 26 times google scholar] http://scholar.google.co.uk/scholar?as_q=khatib+j+concrete+metakaolin&num=10&btnG=Search+Scholar&as_epq=khatib&as_oq=sabir&as_eq=&as_occt=any&as_sauth

ors=&as_publication=&as_ylo=&as_yhi=&as_sdt=1.&as_sdtp=on&as_sdtf=&as_sdts=5&hl=en

103. S Wild, J M Khatib, B B Sabir and S D Addis (1996) “The Potential of Fired Brick

Clay as a Partial Cement Replacement Material”, International Conference - Concrete in the Service of Mankind: Concrete for Environment Enhancement and Protection, (Eds. R K Dhir and T D Dyer), Dundee, 24-28 June 1996, pp 685-696. ISBN 0-419-21450-x

[Cited 16 times google scholar] http://scholar.google.co.uk/scholar?start=20&q=khatib+j+concrete+&hl=en&as_sdt=0,5

104. J M Khatib (1997) “On the Maturity and Non-Destructive Testing of Concrete”, 5th

International Conference on Modern Building Materials, Structures and Techniques, Lithuania, 24-26 May 1997, Vilnius Gediminas Technical University, Vol. 4, pp 37-42. ISBN 9986 05 327 7

105. J M Khatib (1997) “Effect of Maturity and Relative Humidity on Losses in a

Prestressed Concrete Member”, 5th International Conference on Modern Building Materials, Structures and Techniques, Lithuania, 24-26 May 1997, Vilnius Gediminas Technical University, Vol. 1, pp 21-26. ISBN 9986 05 323 4

106. S Wild, J M Khatib and M J Craythorne (1997) “Strength Development of Metakaolin

Mortar”, 5th International Conference on Modern Building Materials, Structures and Techniques, Lithuania, 24-26 May 1997, Vilnius Gediminas Technical University, Vol. 1, pp 58-63. ISBN 9986 05 323 4

107. M O’Farrell, J M Khatib and S Wild (1997) “Porosity and Microstructure of Mortar

Containing Ground Calcined Brick Clay”, 5th International Conference on Modern Building Materials, Structures and Techniques, Lithuania, 24-26 May 1997, Vilnius Gediminas Technical University, Vol. 1, pp 33-38. ISBN 9986 05 323 4

Page 38: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 38of72

108. B B Sabir, S Wild and J M Khatib (1999) “Tailor Made Cements from PC -Pozzolan Blends”, Sixth International Conference on Modern Building Materials, Structures and Techniques, Lithuania, Vilnius Gediminas Technical University, 19-22 May 1999, Vol.1, pp 99-105, ISBN 9986-05-377-3

109. B B Sabir, J M Kinuthia, J M Khatib and M A Wustoff (2001) “Relative Strength and

Workability of Metakaolin - Fly Ash Concrete”, Seventh International Conference on Modern Building Materials, Structures and Techniques, Lithuania, Vilnius Gediminas Technical University, 16-18 May 2001, Vol.1, pp 43-51. ISBN 9986-05-440-0

110. J M Khatib and J J Hibbert (2001) "Strength of Concrete Containing Slag and

Metakaolin", Seventh CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, (Editor: V M Malhotra), Supplementary Volume, 22-27 July, Chenai, India, Publisher: American Concrete Institute, 2001.

111. J M Khatib and D J Ellis (2001) "Mechanical Properties of Concrete Containing

Foundry Sand", Fifth CANMET/ACI International Conference on Recent Advances in Concrete Technology, SP 200 (Ed. V M Malhotra), 29 July-1 August, Singapore, 2001, pp 733-748, American Concrete Institute. ISBN 0-87031-029-1. http://www.normas.com/ACI/pages/SP-200.html

[Cited 33 times google scholar] http://scholar.google.co.uk/scholar?hl=en&q=khatib+j+concrete+foundry+sand&as_sdt=0%2C5&as_ylo=&as_vis=0

112. B Morales-Hernandez, J M Khatib, P Gardiner (2005) "Use of Municipal Solid Waste

Incineration Bottom Ash (MSWI-BA) in Cement Mortar", Proceedings of the 1st Global Slag Conference - From Problem to Opportunity, Dusseldorf, Germany, 14-15 November 2005, pp 210-218. http://www.propubs.com/gsc/gs05reviewed.html

113. J M Khatib, P Watson and S Sloan (2006) "An Investigation to Establish the benefits

of 3D and 4D Modelling as a tool for Construction Planners", World Conference: Accelerating Excellence in the Built Environment (WCAEBE). 2-4 October, University of Wolverhampton. pp1-14.

http://www.acceleratingexcellence.com/index.html 114. J M Khatib and O Kayali (2007) “Dimensional Stability of Metakaolin Mortar”,

Proceedings of the International Conference: Concrete Platform 2007, 19-20 April 2007, Queen’s University Belfast, pp 357-364. ISBN 978-0-85389-913-6. http://www.qub.ac.uk/concreteplatform/index.html

115. J M Khatib, P S Mangat and L Wright (2007) “Using Flue Gas Desulphurisation

(FGD) Waste in Mortar”, Proceedings of the International Conference: Concrete Platform 2007, 19-20 April 2007, Queen’s University Belfast, pp 395-404. ISBN 978-0-85389-913-6. http://www.qub.ac.uk/concreteplatform/index.html

116. J M Khatib and F Khalaf (2007) “Load Deflection of Reinforced Concrete Beam

Containing Metakaolin”, Proceedings of the International Conference: Concrete Platform 2007, 19-20 April 2007, Queen’s University Belfast, pp 623-632. ISBN 978-0-85389-913-6. http://www.qub.ac.uk/concreteplatform/index.html

Page 39: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 39of72

117. J M Khatib and R Siddique (2007) “Self-Compacting Cement-Fly Ash Concrete”,

Proceedings of the 5th International RILEM Symposium on Self-Compacting Concrete (CSS 2007), 3-5 September 2007, Ghent-Belgium, Vol.2, pp. 915-921, ISBN 978-2-35158-051-6. http://www.qub.ac.uk/concreteplatform/index.html

118. L Wright, J M Khatib and P S Mangat (2007) “Influence of Slag on Sulphate

Resistance of Mortar Containing Desulphurised Waste”, International Symposium on Innovation & Sustainability of Structures in Civil Engineering, 28-30 November 2007, Shanghai, China, Vol. 2, pp1361-1367 ISBN 978-7-5641-0999-8 www.isiss2007.net

119. J M Khatib, L Wright and P S Mangat (2007) “Effect of Incorporating Flue Gas

Desulphurisation (FGD) Waste on Porosity and Pore size Distribution of cement paste”, International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2007), 28-30 November 2007, Shanghai, China, Vol. 2, pp1352-1360, ISBN 978-7-5641-0999-8 www.isiss2007.net

120. J M Khatib, O Kayali and S Kenai (2007) “Effect of Low Water to Binder Ratio of

Properties of Concrete with Metakaolin” , International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2007), 28-30 November 2007, Shanghai, China, Vol. 2, pp 889-896, ISBN 978-7-5641-0999-8 www.isiss2007.net

121. L Wright, J M Khatib and P S Mangat (2007) “Chemical Shrinkage of Paste

Containing Flue Gas Desulphurisation (FGD) Waste”, International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2007), 28-30 November, Shanghai, China, Vol. 2, pp1368-1377 ISBN 978-7-5641-0999-8 www.isiss2007.net

122. J M Khatib, L Wright and P S Mangat (2007) “The Resistance to Sodium Sulphate of

Mortars Modified with Flue Gas Desulphurisation (FGD) Waste”, International Symposium on Innovation & Sustainability of Structures in Civil Engineering, 28-30 November 2007, Shanghai, China, Vol. 2, pp1344-1351 ISBN 978-7-5641-0999-8 www.isiss2007.net

123. T U Mohammed, H Hamada, H Yokota, J M Khatib (2007) “ASR Expansion of

Concrete Beams with Various Restrained Conditions – 1500 days of Marine Exposure”, Proceedings of the International Conference on Advances in Cement Based Materials and Applications to Civil Infrastructure (ACBM-ACI), American Concrete Institute, 12-14 December 2007, Lahore, Pakistan, Vol. 1, pp 441-456. ISBN 978-969-564-015-3 www.isiss2007.net

124. O Kayali and J M Khatib (2007) “Alternatives to Portland Cement in Relation to

Sustainability of concrete” , International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2007), 28-30 November 2007, Shanghai, China, Vol. 2, pp1205-1214 ISBN 978-7-5641-0999-8 www.isiss2007.net

125. R Siddique and J M Khatib (2008) “High-Volume Fly Ash Concrete and Abrasion

Resistance”, 7th International Conference on: Sustainable Aggregates, Asphalt Technology and Pavement Engineering, Liverpool John Moor University, 20-21 February 2008, pp. 1-19. http://www.azobuild.com/Events/EventDetails.asp?EventID=10

Page 40: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 40of72

126. J M Khatib, L Wright, P S Mangat (2008) “The Resistance to Magnesium Sulphate of

Mortars Modified with Flue Gas Desulphurisation (FGD) Waste, 7th International Conference on: Sustainable Aggregates, Asphalt Technology and Pavement Engineering, Liverpool John Moor University, 20-21 February, 2008, pp. 21-29. http://www.azobuild.com/Events/EventDetails.asp?EventID=10

127. S Kenai, B Menadi, A Attar, J M Khatib (2008) "Effect of crushed limestone fines on

strength of mortar and durability of concrete", International Conference on Construction and Building Technology, Conference A: Emerging technology in construction materials, 16-20 June, 2008, pp.205-216, Kuala Lumpur, Malaysia, http://www.conferencealerts.com/seeconf.mv?q=ca1xah0h

128. R Siddique, J M Khatib, İ Yüksel and P Aggarwal (2009) “Strength properties of

high-volume fly ash (HVFA) concrete incorporating steel fibres”, International Conference - Excellence in Concrete Construction Through Innovation, 9-10 September 2008, pp 149-158, (Editors: Limbachiya M C & Kew H Y), Taylor & Francis Group publishing, 2009, ISBN 978-0-415-47592-1. http://cmrg2008.kingston.ac.uk/

129. J M Khatib, L Wright and P S Mangat (2009) “Visual examination of mortars

containing flue gas desulphurisation waste subjected to magnesium sulphate solution”, International Conference - Excellence in Concrete Construction Through Innovation, Kingston University, 9-10 September 2008, pp 221-226, (Editors: Limbachiya M C & Kew H Y), Taylor & Francis Group publishing, 2009, ISBN 978-0-415-47592-1. http://cmrg2008.kingston.ac.uk/

130. J M Khatib, B Medani and S Kenai (2009) “Effect of Cement Type on Strength

Development of Mortar Containing Limestone Fines”, International Conference - Excellence in Concrete Construction Through Innovation, Kingston University, 9-10 September 2008, pp 227-232, (Editors: Limbachiya M C & Kew H Y), Taylor & Francis Group publishing, 2009, ISBN 978-0-415-47592-1. http://cmrg2008.kingston.ac.uk/

131. J M Khatib, S Wild, R Siddique and S Kenai (2009) “Adiabatic temperature rise of

metakaolin mortar”, International Conference - Excellence in Concrete Construction Through Innovation, Kingston University, 9-10 September 2008, pp 233-238, (Editors: Limbachiya M C & Kew H Y), Taylor & Francis Group publishing, 2009, ISBN 978-0-415-47592-1. http://cmrg2008.kingston.ac.uk/

132. Yϋksel, , R Siddique, Ö Özkan and J M Khatib (2009) “Effect of GGBFS and GSS on the

properties of mortar”, International Conference - Excellence in Concrete Construction Through Innovation, Kingston University, 9-10 September 2008, pp 445-452, (Editors: Limbachiya M C & Kew H Y), Taylor & Francis Group publishing, 2009, ISBN 978-0-415-47592-1. http://cmrg2008.kingston.ac.uk/

133. J Zhang, J M Khatib, C Booth and R Siddique (2009) “Possible utilisation of wheat husk

ash waste in the production of precast concrete elements”, International Conference - Excellence in Concrete Construction Through Innovation, Kingston University, 9-10 September 2008, pp 517-522, (Editors: Limbachiya M C & Kew H Y), Taylor & Francis Group publishing, 2009, ISBN 978-0-415-47592-1. http://cmrg2008.kingston.ac.uk/

Page 41: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 41of72

134. B Zhao, J M Khatib and C Ellis (2009) “Cold Recycling Techniques in Pavement Engineering”, The 8th Annual International Conference, Sustainable Aggregates, Pavement Engineering & Asphalt Technology, Design Construction, Management, Performance and Rehabilitations, 18th - 19th February 2009, Liverpool John Moor University, Liverpool, UK, Paper No. 13, pp 1-14. http://www.ljmu.ac.uk/BLT/BUE_Docs/CALLFORPAPERS-2306008New.pdf

135. J M Khatib, S Kenai, R Siddique and O Kayali (2009) “Effect of Initial Curing on

Absorption of Concrete Containing Slag”, The 8th Annual International Conference, Sustainable Aggregates, Pavement Engineering & Asphalt Technology, Design Construction, Management, Performance and Rehabilitations, 18-19 February 2009, Liverpool John Moor University, Liverpool, UK, Paper No. 19, pp 1-17. http://www.ljmu.ac.uk/BLT/BUE_Docs/CALLFORPAPERS-2306008New.pdf

136. J M Khatib, R Siddique, A Bougara, P Harris (2009) “Effect of Metakaolin on Adiabatic

Temperature Rise of Cement Based Mortar”, The 8th Annual International Conference, Sustainable Aggregates, Pavement Engineering & Asphalt Technology, Design Construction, Management, Performance and Rehabilitations, 18-19 February 2009, Liverpool, Liverpool John Moor University, UK, Paper No. 20, pp 1-10. http://www.ljmu.ac.uk/BLT/BUE_Docs/CALLFORPAPERS-2306008New.pdf

137. J S Zhang, J M Khatib, M Tarek Uddin, P Harris and C Booth (2009) “Can Wheat Husk

Ash Waste be Used in Producing Sustainable Construction Materials”, The 8th Annual International Conference, Sustainable Aggregates, Pavement Engineering & Asphalt Technology, Design Construction, Management, Performance and Rehabilitations, 18th - 19th February, Liverpool John Moor University, Liverpool, UK, Paper No. 21, pp 1-10. http://www.ljmu.ac.uk/BLT/BUE_Docs/CALLFORPAPERS-2306008New.pdf

138. R Siddique, P Aggarwal, J M Khatib, Y Aggarwal (2009), “Strength Properties and

Chloride Permeability of Self-Compacting Concrete”, Proceeding 2nd International Symposium on Design, Performance and Use of Self-Consolidating Concrete (SCC’2009-China), 5-7 June, Beijing, China, pp 381-390, ISBN: 978-2-35158-073-8 Email: [email protected] http://SCC2009.hnu.cn http://www.rilem.net

139. C J Crosby, C A Booth, A T Worsley, M A Fullen, D E Searle, J M Khatib, C M

Winspear (2009), “Application of Mineral Magnetic Concentration Measurements as a Particle Size Proxy for Urban Road Deposited Sediments”, 7th International Conference on Modelling, Monitoring and Management of Air Pollution, C A Brebbia and V Popov (Eds), Air Pollution XVII, WIT Transactions on Ecology and the Environment, Vol. 123, WIT Press, pp 153-162, ISBN: 978-1-84564-195-5, ISSN 1746-448X (print), ISSN 1743-3451 (online) doi: 10.2495/AIR090141, Email: [email protected] www.witpress.com,

140. J M Khatib, L Wright, P S Mangat (2009), “Contribution of Slag to Sodium Sulphate

Resistance of Concrete Containing Desulphurised Waste”, First International Conference on Recycling and Reuse of Materials (Polymers, Wood, Leather, Water, Glass, Metals, Ceramics, Semi Conductors etc) and their Products (ICRM – 2009), 17-19 July 2009, Kottayam, Kerala, India, www.recycling.macromol.in

141. J M Khatib, S Kenai, O Kayali, R Siddique (2009), “Pore Size Distribution of GGBS-Cement Based Paste Subjected to Different Curing Regimes and Taken from Different Locations”, First International Conference on Recycling and Reuse of Materials (Polymers, Wood, Leather, Water, Glass, Metals, Ceramics, Semi Conductors etc) and their Products (ICRM – 2009), 17-19 July 2009, Kottayam, Kerala, India, www.recycling.macromol.in

Page 42: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 42of72

142. J M Khatib, S Baig, R Siddique, S Kenai (2009), “Concrete Characteristics Using

Foundry Sand as Fine Aggregates Replacement”, First International Conference on Recycling and Reuse of Materials (Polymers, Wood, Leather, Water, Glass, Metals, Ceramics, Semi Conductors etc) and their Products (ICRM – 2009), 17-19 July 2009, Kottayam, Kerala, India, www.recycling.macromol.in

143. J M Khatib, L Wright, P S Mangat (2009), “Visual Examination of Mortars Containing

Flue Gas Desulphurisation Waste Subjected to Sodium Sulphate Solution”, 29th Cement and Concrete Science Conference, Institute of Materials, Minerals and Mining, Black L and Purnell P (Editors), University of Leeds, 7-8 September, pp 47-50, ISBN-13 978 0 85316 2810. http://www.engineering.leeds.ac.uk/resilience/events/CCS-Leeds09.shtml

144. J M Khatib, J S Zhang, S Kenai, S Firat (2009), “Prediction of Compressive Strength

of Concrete Containing Foundry Sand”, 29th Cement and Concrete Science Conference, Institute of Materials, Minerals and Mining, Black L and Purnell P (Editors), University of Leeds, 7-8 September, pp 62-65, poster, ISBN-13 978 0 85316 2810. http://www.engineering.leeds.ac.uk/resilience/events/CCS-Leeds09.shtml

145. A Bougara, J M Khatib, H Khellafi (2009), “Some parameters Affecting the Heat of

Hydration of Blast-Furnace Slag Cement”, SBEIDCO - 1st International Conference on Sustainable Built Environment Infrastructures in Developing Countries ENSET Oran (Algeria), 12-14 October 2009, Vol 3, pp 9-16, ISSN 2170-0095, http://sbeidco.000space.com/list.html

146. B Medani, S Kenai, J M Khatib, A Ait-Mokhtar (2009), “ Strength Development and

Prediction of Mortars Containing Limestone Fines”, SBEIDCO - 1st International Conference on Sustainable Built Environment Infrastructures in Developing Countries ENSET Oran (Algeria), 12-14 October 2009, Vol 1, pp 91-98, ISSN 2170-0095, http://sbeidco.000space.com/list.html

147. O Kayali, J M Khatib (2009), “Concrete Sustainability and the Role of Fibre

Reinforcement”, Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2009), 28-30 November 2009, (Editors: Li J, Wu, B, Wu Z, Wang Z and Ji J), Guangzhou, China, Vol. 1, pp 148-153, South China University of Technology Press, (ISBN 978-7-5623-2782-0) http://www.isiss2009.com.cn/

148. J M Khatib, M Tarek Uddin, O Kayali, A Bougara (2009), “Non-Destructive Testing

for Concrete with Metakaolin Cured at Low Temperature”, Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2009), 28-30 November 2009, (Editors: Li J, Wu, B, Wu Z, Wang Z and Ji J), Guangzhou, China, Vol. 1, pp 171-175, South China University of Technology Press, (ISBN 978-7-5623-2782-0) http://www.isiss2009.com.cn/

149. J M Khatib, O Kayali, J S Zhang, A Bougara (2009), “Relative Strength of Metakaolin

Concrete Cured at Normal and Low Temperatures”, Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2009), 28-30 November 2009, (Editors: Li J, Wu, B, Wu Z, Wang Z and Ji J), Guangzhou, China, Vol. 1, pp 176-180 South China University of Technology Press (ISBN 978-7-5623-2782-0). http://www.isiss2009.com.cn/

Page 43: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 43of72

150. J M Khatib, S Kenai, O Kayali, R Siddique (2009), “Effect of Slag on Pore Size Distribution of Cement Paste Subjected to Different Curing Regimes”, Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2009), 28-30 November 2009, (Editors: Li J, Wu, B, Wu Z, Wang Z and Ji J), Guangzhou, China, Vol. 1, pp 228-233, South China University of Technology Press (ISBN 978-7-5623-2782-0). http://www.isiss2009.com.cn/

151. J M Khatib, M Tarek Uddin, J S Zhang, Hidenori Hamada (2010), “New Generation

Water-Reducing Admixtures for Concrete”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors:J Zachar, P Claisse, T R Naik, E Ganjian), Vol 2, pp 939-947, ISBN 978-1-4507-1490-7. http://www.claisse.info/2010%20papers/Volume%201%20thru%203_toc%20pgs.pdf

152. T U M Tarek Uddin, M F Azam Khan, M R Kabir, M A Awal, A Al Mahboub, H

Hamada, J M Khatib (2010), “Recycling of Concrete Made with Brick Aggregate”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors: J Zachar, P Claisse, T R Naik and E Ganjian), Vol 2, pp 949-959. ISBN 978-1-4507-1490-7.

http://www4.uwm.edu/cbu/ancona.html 153. O Kayali, J M Khatib, M Sharfuddin Ahmed, (2010), “Industrial By-Products for

Sustainable Concrete Structures”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors: J Zachar, P Claisse, T R Naik and E Ganjian), Vol 1, pp 437-446. ISBN 978-1-4507-1490-7. http://www4.uwm.edu/cbu/ancona.html

154. J M Khatib, O Kayali, S Kenai, M N Haque (2010), “Effect of Curing Temperature on

Relative Strength of Metakaolin Concrete”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors: J Zachar, P Claisse, T R Naik and E Ganjian), Vol 1, pp 247-254. ISBN 978-1-4507-1490-7. http://www4.uwm.edu/cbu/ancona.html

155. J M Khatib, L Wright, P S Mangat (2010), “Effect of Simulated Desulphurised Waste

Content on Resistance to Sodium Sulphate”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors: T R Naik, F Canpolat, P Claisse and E Ganjian), Proceedings of Special Technical Sessions, pp 407-413. ISBN 978-1-4507-1487-7. http://www4.uwm.edu/cbu/ancona.html

156. J M Khatib, S Kenai, J S Zhang, S Firat, P H Harris (2010), “Effect of Sample

Location and Curing on Pore Volume and Threshold Diameter of Cement Paste with and without Slag”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors: J Zachar, P Claisse, T R Naik and E Ganjian), Vol 1, pp 319-327. ISBN 978-1-4507-1490-7. http://www4.uwm.edu/cbu/ancona.html

157. L Wright, J M Khatib and P S Mangat (2010), “Resistance to Magnesium Sulphate of

Mortar modified with GGBS and Flue Gas Desuphurisation (FGD) Waste”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors: J Zachar, P Claisse, T R Naik and E Ganjian), Web. http://www.claisse.info/2010%20papers/2010%20Papers.htm

Page 44: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 44of72

158. A Hadj-Sadok, S Kenai, L Courard and J M Khatib (2010), “Transport Properties of Mortars and Concrete Modified with GGBFS”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors: J Zachar, P Claisse, T R Naik and E Ganjian), Vol 2, pp 909-919. ISBN 978-1-4507-1490-7. http://www4.uwm.edu/cbu/ancona.html

159. J M Khatib, S Baig, A Bougara and C Booth (2010), “Foundry Sand Utilisation in

Concrete Production”, 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, 28-30 June, (Editors: J Zachar, P Claisse, T R Naik and E Ganjian), Vol 1, pp 931-938. ISBN 978-1-4507-1490-7.

http://www4.uwm.edu/cbu/ancona.html 160. J M Khatib, L Wright, P S Mangat (2010), “Pore Size Distribution for Cement-Fly

Ash-Gypsum Blend”, 30th Cement and Concrete Science Conference, (Editors: Grover LM, Hofmann MP, Rossetto H and Smith AL), University of Birmingham, UK, Institute of Materials, Minerals and Mining (IOM3), 13-15 September 2010, pp 125-128, 47-50, ISBN-978-0-70442-797-6. http://www.iom3.org/events/cement-and-concrete-science-2010

161. J M Khatib, L Wright and P S Mangat (2010), “Chemical Shrinkage of Cement-Fly-

Ash-Gypsum Blended Paste”, 30th Cement and Concrete Science Conference, (Editors: Grover LM, Hofmann MP, Rossetto H and Smith AL), University of Birmingham, UK, Institute of Materials, Minerals and Mining (IOM3), 13-15 September 2010, pp 173-176, ISBN-978-0-70442-797-6.

http://www.iom3.org/events/cement-and-concrete-science-2010 162. J M Khatib, B A Herki, S Kenai, B Menadi and A O Coker (2010), “Capillary Water

Absorption of Concrete Incorporating Foundry Sand”, 30th Cement and Concrete Science Conference, (Editors: Grover LM, Hofmann MP, Rossetto H and Smith AL), University of Birmingham, UK, Institute of Materials, Minerals and Mining (IOM3), 13-15 September 2010, pp 177-180, ISBN-978-0-70442-797-6.

http://www.iom3.org/events/cement-and-concrete-science-2010 163. P Aggarwal, R Siddique, Y Aggarwal and J M Khatib (2010), “Influence of Water/Powder

ratio on Strengths of SCC Made with Coal Bottom Ash”, Sixth Int. RILEM Symposium on Self-Compacting Concrete - 4th North American Conference on the Design and Use of SCC (SCC2010), Monteral, Quebec, Canada, (Editors: Khayat KH and Demitri F), 26-29 September 2010, pp181-192, http://www.rilem.net/eventDetails.php?event=270

164. S Kenai, B Menadi and J M Khatib (2010), “The Role of Construction Engineering

Practice in Sustainable Development”, 9th International Congress on Advances in Civil Engineering (accepted), 27-30 September 2010, Karadeniz Technical University, Trabzon, Turkey, pp1-8. ISBN: 978-975-6983-66-9, http://ace2010.ktu.edu.tr/index.htm

165. J M Khatib S Firat, S Baig, S Kenai and B Menadi, (2010), “Effect of Foundry Sand

Utilisation on Concrete Performance”, 9th International Congress on Advances in Civil Engineering (accepted), 27-30 September 2010, Karadeniz Technical University, Trabzon, Turkey, pp1-6. ISBN: 978-975-6983-66-9, http://ace2010.ktu.edu.tr/index.htm

166. J M Khatib L Wright and P S Mangat (2010), “Effect of Simulated Desulphurised waste

Content on Resistance to Magnesium Content”, 9th International Congress on Advances in Civil Engineering (accepted), 27-30 September, Karadeniz Technical University, Trabzon, Turkey, pp1-8. ISBN: 978-975-6983-66-9, http://ace2010.ktu.edu.tr/index.htm

Page 45: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 45of72

167. K Henni-Chebra, A Bougara and J M Khatib (2011) , “Effet des Articules Sedimentables Engendrees par la Fabrication du Ciment sur l’Environment“, 1st National Seminar in Civil Engineering Materials and Environmetal Protection [1er Seminar National de Genie Civil sur les Materiaux et Protection de l’Environnement]. 14-15 March 2011, Mostaganem, Algeria, pp1-6, , In French, http://architous.1fr1.net/t1061-1er-seminaire-national-de-genie-civil-sur-les-materiaux-et-protection-de-lenvironnement

168. J M Khatib, N Chileshe, and Farah, M (2011) ‘Achieving Sustainability through

Refurbishment of Tower Blocks: Tenants’ Perspectives’. In: Haupt, T.C. (Ed), In Proceedings of the 6th Built Environment Conference, Johannesburg, South Africa, 31st July – 2nd August 2011, pp. 216 – 240, ISBN 978-0-86970-713-5

169. S Adu-Amankwah, J M Khatib, L K A Sear and D Searle (2011), “Sustainable

Construction Materials from Pulverized Fuel Ashes: Fresh State Properties”, 10th International Postgraduate Research Conference (IPGRC) 2011, University of Salford, (Editors: Egbu C, Sutrisna M, Underwood J, Arif M, Aziz Z), 14-15 September 2011. pp 685-695 http://www.irw2011.org/ipgrc/. ISBN 978-1-907842-17-7 Received an Award for the Best Paper

170. J M Khatib, B A Herki, S Firat, B Menadi, S Kenai (2011), “Capillarity of Concrete

Incorporating Foundry Sand a Replacement of Sand”, Participation (abstract proceedings only) in the International Construction Congress (ICPCC11), Elazig-Turkey, Firat University, 28-30 September 2011 http://web.firat.edu.tr/ipcc/

171. J M Khatib, L Wright and P S Mangat (2011), “External Chemical Shrinkage of

Pastes Containing Flue Gas Desulphurisation (FGD) Waste”, Participation (abstract proceeding only) in the International Construction Congress (ICPCC11), Elazig-Turkey, Firat University, 28-30 September 2011 http://web.firat.edu.tr/ipcc/

172. J M Khatib, L Wright and P S Mangat (2011), “Influence of Incorporating Flue Gas

Desulphurisation (FGD) Residues on Porosity and Pore Size Distribution of Cement Paste”, Participation (abstract proceeding only) in the International Construction Congress (ICPCC11), Elazig-Turkey, Firat University, 28-30 September 2011 http://web.firat.edu.tr/ipcc/

173. J M Khatib, S Baig, O Kayali, S Kenai, B Menadi (2011), “Waste Foundry Sand

Usage in Concrete” (7-days), Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2011), 28-30 October 2011, (Eds: Li J, Lei Y, Wu Z, Liang R), Southest University Press, Xiamen University, China, Vol 1, pp858-863 http://isiss2011.xmu.edu.cn/ ; ISBN 978-7-5641-3029-9

174. J M Khatib, A Shaaban, O Kayali and S Kenai, B Menadi (2011), “Effect of Fly Ash

on Capillarity of Self-Compacting Fly Ash Concrete”, Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering (ISISS’ 2011), 28-30 October 2011, Eds: Li J, Lei Y, Wu Z, Liang R), Southest University Press, Xiamen University, China, Vol 1, pp850-857 http://isiss2011.xmu.edu.cn/ ; ISBN 978-7-5641-3029-9

175. B Menadi, S Kenai and J M Khatib (2011), “Some Aspects of Durability Properties of

Concrete Containing Limestone Fines”, 2nd International Seminar: Innovation and Valorisation in Civil Engineering & Construction, Rabat, Morocco, 23-25 November 2011, no. IP-294, p121, http://www.fsr.ac.ma/invaco2/,

Page 46: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 46of72

176. O Kayali, J M Khatib and M Sharfuddin Ahmed (2011), “The Role of Industrial By-

Products in Creating Sustainable Concrete”, 2nd International Seminar: Innovation and Valorisation in Civil Engineering & Construction, Rabat, Morocco, 23-25 November 2011, no. Io-304, p69, http://www.fsr.ac.ma/invaco2/,

177. J M Khatib, A Shaaban, B Menadi and S Kenai (2011), “Water Absorption by

Capillary Action of Self-Compacting Concrete Containing Fly Ash”, 2nd International Seminar: Innovation and Valorisation in Civil Engineering & Construction, Rabat, Morocco, 23-25 November 2011, no. IO-339, p72, http://www.fsr.ac.ma/invaco2/,

178. J M Khatib, S Baig, B Menadi and S Kenai (2011), “Waste Foundry Sand Usage in

Concrete” (14-days), 2nd International Seminar: Innovation and Valorisation in Civil Engineering & Construction, Rabat, Morocco, 23-25 November 2011, no. IP-137, p94, http://www.fsr.ac.ma/invaco2/,

179. J M Khatib, C Humphries, M Ramli, E S Negim, (2011), “Concrete Containing High

Volume of Metakaolin as Cement Replacement”, 5th International conference and Workshop on Built Environment in Developing Countries- Rehumanizing the Built Environment, 6-7 December 2011, University Sains Malaysia, Malaysia, pp x-x http://www.hbp.usm.my/icbedc11/acceptedpaper2.html

180. E S Negim, M Ramli J M Khatib, M M Mohammed, L Bekbayeva, M I Saleh, (2011),

“Effect of Hydrophilic Copolymers on the Physicomechanical Properties of portland Cement Mortar”, 5th International conference and Workshop on Built Environment in Developing Countries- Rehumanizing the Built Environment, 6-7 December 2011, University Sains Malaysia, Malaysia, pp x-x http://www.hbp.usm.my/icbedc11/acceptedpaper2.html

181. B A Herki, J M Khatib, M Ramli and E S Negim, (2011), “Early age capillarity of

Concrete Incorporating Foundry Sand as Replacement of sand”, 5th International conference and Workshop on Built Environment in Developing Countries- Rehumanizing the Built Environment, 6-7 December 2011, University Sains Malaysia, Malaysia, pp x-x http://www.hbp.usm.my/icbedc11/acceptedpaper2.html

182. J M Khatib, A Y Shaaban, M Ramli, E S Negim, (2011), “capillary water absorption

of Self-Compacting Concrete Containing Fly Ash”, 5th International conference and Workshop on Built Environment in Developing Countries- Rehumanizing the Built Environment, 6-7 December 2011, University Sains Malaysia, Malaysia, pp x-x http://www.hbp.usm.my/icbedc11/acceptedpaper2.html

183. J M Khatib (2011), Performance of Concrete Containing Metakaolin (MK)”,

Presented (only) at Second International Conference on Future Concrete 2011, December 12-14, Dubai-UAE, (Ed: M El Barrak), ACTS, not in the proceeding (presentation only), www.futureconcrete.com; www.acts-int.com

184. J M Khatib, A F Shaaban, B Menadi, S Kenai, (2011), “Early Age Capillary Water

Absorption of Fly-Ash Self-Compacting Concrete”, Proceedings of the Second International Conference on Future Concrete 2011, December 12-14, Dubai-UAE, (Ed: M El Barrak), ACTS, pp 1-9, www.futureconcrete.com; www.acts-int.com

Page 47: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 47of72

185. J M Khatib, C Humphries (2011), “Using High Volume of Metakaolin in Concrete

Production”, Proceedings of the Second International Conference on Future Concrete, 2011, December 12-14 2011, Dubai-UAE, (Ed: M El Barrak), ACTS, pp 1-7, www.futureconcrete.com; www.acts-int.com

186. B A Herki, J M Khatib, S Firat, S Negim (2012), “Long Term Capillarity of Concrete

Incorporating Foundry Sand as Replacement of Sand”, International Workshop on Earthquake and Sustainable Materials, Sakarya University, Faculty of Technology, Civil Engineering Department, Turkey, 19 January 2012, pp18-26. ISBN: 978-975-7988-92-2 http://www.iwesm.sau.edu.tr/?s=s9

187. S Adu-Amankwah, J M Khatib, L K A Sear, D E Searle (2012), “Alkaline-Activated

High Loss on Ignition (LOI) Fly Ash: Effect of Sodium Hydroxide Molarity”, International Workshop on Earthquake and Sustainable Materials, Sakarya University, Faculty of Technology, Civil Engineering Department, Turkey, 19 January 2012, pp11-17. ISBN: 978-975-7988-92-2 http://www.iwesm.sau.edu.tr/?s=s9

188. J M Khatib, L Wright, P S Mangat (2012), “Pore Size Distribution of Cement paste

incorporating Fly Ash-Gypsum waste at 7 days of Curing”, International Workshop on Earthquake and Sustainable Materials, Sakarya University, Faculty of Technology, Civil Engineering Department, Turkey, 19 January 2012, pp1-10. ISBN: 978-975-7988-92-2 http://www.iwesm.sau.edu.tr/?s=s9

189. M Hassan, P H E Gardiner, J M Khatib, P S Mangat (2012), “Stabilisation of Lead

Contaminated Soil Using Portland Cement”, International Workshop on Earthquake and Sustainable Materials, Sakarya University, Faculty of Technology, Civil Engineering Department, Turkey, 19 January 2012, pp 157-167, ISBN: 978-975-7988-92-2 http://www.iwesm.sau.edu.tr/?s=s9

190. J M Khatib, C Humphries (2012), “Concrete Production with High Metakaolin

Content to Replace Cement”, International Workshop on Earthquake and Sustainable Materials, Sakarya University, Faculty of Technology, Civil Engineering Department, Turkey, 19 January 2012, pp 27-35. ISBN: 978-975-7988-92-2 http://www.iwesm.sau.edu.tr/?s=s9

191. A A Hamood, J M Khatib (2012), “Utilization of Untreated Sewage Sludge for the

production of Sustainable Construction Materials”, Proceedings of the 6th International Conference on Environmental Science and Technology 2012, (Editors: Sorial GA & Hong J), 25-29 June 2012, Houston, Texas, USA, Vol. 1, pp 216-222. ISBN: 9780976885351 http://www.aasci.org/conference.html

192. N Sarwar, M Tarek Uddin, S Z Bosunia, J M Khatib (2012), “Development of High

Strength Concrete in Bangladesh”, 3rd International Conference on Construction in Developing Countries (ICCIDC-III) – Advancing Civil, Architectural and Construction Engineering and Management, 4-6 July 2012, Bangkok, Thailand, (Editors: SM Ahmed, RU Farooqui, S Azhar, A Shah, SH Lodi and NA Smith), Paper 81, ID 69, pp 560-566, Routledge - Taylor & Francis Group (Publisher), ISBN 1-884342-02-07 http://www.iccidc.ecu.edu/ http://www.iccidc.ecu.edu/openconf/modules/request.php?module=oc_proceedings&action=summary.php&a=Accept&id=69

Page 48: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 48of72

193. S Adu-Amankwah, J M Khatib, D Searle, L K A Sear (2012), “Maximizing the Use of

PFA in the Production of Sustainable Structural Materials”, 8th International Conference: Concrete in the Low Carbon Era, Dundee, UK, 9-11 July 2012, http://www.ctucongress.co.uk/techprog.html#papers

194. E M Negim, A M Alfituri, J M Khatib, B Saad, M I Saleh (2012), “The effect of MMA

and 2-EHA on the Physic-mechanical Properties of Tripolymer”, The 1st USM-KAZNU International Conference on Challenges of Teaching and Chemistry Research in Institutions of Higher Learning, Organised by Universiti Sains Malaysia & Al-Farabi Kazakh National University Malaysia, 11-13 July, P-14, pp 38.

195. E M Negim, H A M Adam, M Ramli, J M Khatib, M I Saleh (2012), “Influence of

Types of Admixtures on the Morphology of Cement Hydrates”, The 1st USM-KAZNU International Conference on Challenges of Teaching and Chemistry Research in Institutions of Higher Learning”, Organised by Universiti Sains Malaysia and Al-Farabi Kazakh National University Malaysia, 11-13 July, P-15, pp 39.

196. O Ahiakwo, D Oloke, S Suresh, J M Khatib (2012), “A Critical Review of the

Potential for the Implementation of Lean in the Nigerian Building Industry”, in: Tommelein, I.D. and Pasquir, C.L. (Eds), Proceedings 20th International Group for Lean Construction (IGLC) Conference, 18-20 July 2012, San Diego, California, pp 711-720

197. O Ahiakwo, D Oloke, S Suresh. and J M Khatib (2012), “Client perspectives for the

implementation of lean construction in Nigerian construction industry”, in: Laryea, S.A., Agyepong, S.A., Leiringer, R. and Hughes, W. (Eds), Proceedings 4th West African Built Environment Research (WABER) Conference, 24-26 July 2012, Abuja, Nigeria, pp 133-146

198. D C Okoronkwo, J M Khatib, N Emekwuru, R Hall (2012), “Gains in Fly-Ash in

Rammed Earth”, CAN’2012 Eleventh AES – ATEMA International Conference: Advances and Trends in Engineering Materials and their Applications, (Editor: Y M Haddad) Totonto, Canada, 6-10 August 2012, Advanced Engineering Solutions, WordPress.com, pp143-150. ISBN: 978-0-9879945-1-6

199. J M Khatib, ESM Negim, GA Mun, E Gjonbalaj (2012), “Cement Mortar with High

Volume Metakaolin”, VII International Symposium, Physics & Chemistry of Carbon Materials/Nanoengineering, 19-21 September, Ministry of Education and Science of the republic of Kazakhstan Committee of Science MES RK, Institute of Combustion Problems, pp144-148

200. J M Khatib, L Wright, PS Mangat, GA Mun (2012), “Short-Term Pore Size

Distribution of Cement-Fly Ash-Gypsum Paste”, VII International Symposium, Physics & Chemistry of Carbon Materials/Nanoengineering, 19-21 September, Ministry of Education and Science of the republic of Kazakhstan Committee of Science MES RK, Institute of Combustion Problems, pp214-217

Page 49: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 49of72

201. J M Khatib, L Wright, PS Mangat, GA Mun (2012), “Long-Term Pore Size Distribution of Cement-Fly Ash-Gypsum Paste”, VII International Symposium, Physics & Chemistry of Carbon Materials/Nanoengineering, 19-21 September, Ministry of Education and Science of the republic of Kazakhstan Committee of Science MES RK, Institute of Combustion Problems, pp218-222

202. M Hassan, PHE Gardiner, J M Khatib, PS Mangat, GA Mun (2012), “Stabilisation of

Lead Contaminated Soil using Hydrated Lime”, VII International Symposium, Physics & Chemistry of Carbon Materials/Nanoengineering, 19-21 September, Ministry of Education and Science of the republic of Kazakhstan Committee of Science MES RK, Institute of Combustion Problems, pp223-226

203. A Hamood, J M Khatib (2012) “Engineering Properties of Cement-Based materials

Incorporating Raw Sewage Sludge (RSS) as a water Replacement”, 10th International Congress on Advances in Civil Engineering, 17-19 October 2012, Middle East Technical University, Ankara, Turkey, Paper No. 837. http://www.ace2012.metu.edu.tr/

204. A Hamood and J M Khatib (2012), “The Use of Raw Sewage Sludge (RSS) As a

Water Replacement in Cement-Based Mixes”. 2nd International Conference on Sustainable Design, Engineering and Construction (ICSDEC). ICSDEC 2012: Developing the Frontier of Sustainable Design, and Construction. Section: Water Resources & Efficiency, (Editor: Wai Kiong Oswald Cjong, Jie Gong, Jae Chang and Mohsin Khalid). 7-9 November 2012, pp 1001-1008, Fort Worth, Texas, USA. ASCE ISBN: 9780784412688. http://ascelibrary.org/doi/abs/10.1061/9780784412688.118

205. B A Herki, J M Khatib, D Searle, P Georgakis (2012) “Mechanical Properties of

Concrete Incorporating Waste Lightweight Aggregates”, 6th International Conference and Workshop on the Built Environment in Developing Countries- Fragmented Futures: the built environment in a volatile world, ICBEDC 2012, 4-5 December 2012, Adelaide, South Australia, http://www.plevin.com.au/icbedc2012/program.html

206. J M Khatib, R. Raikhan, H.S. Sohl, E. M. Shaikhutdinov (2012). “Effect of Ground

Glass Powder on Concrete Strength”. International scientific conference «AUEZOV READING – 11: «Kazakhstan on the way of social education: Innovative directions of research, education and culture», M. Auezov South Kazakhstan State University, Shymkent, Kazakhstan, 6-7 December 2012, pp 107-109. ISBN 9965-03-274-2

207. J M Khatib, G. Zh. Yeligbayeva, E. M. Negim, E Gjonbalaj (2012). “Replacing

Cement with High Volume Metakaolin in Mortar”. International scientific conference «AUEZOV READING – 11: «Kazakhstan on the way of social education: Innovative directions of research, education and culture», M. Auezov South Kazakhstan State University, Shymkent, Kazakhstan, 6-7 December 2012. pp 100-102. ISBN 9965-03-274-2

208. J M Khatib, P S Mangat, L Wright. (2012) “Effect of Gypsum on the Pore Size

Distribution of Fly Ash-Cement Paste at 90 Days of Curing”. International scientific conference «AUEZOV READING – 11: «Kazakhstan on the way of social education: Innovative directions of research, education and culture», M. Auezov South Kazakhstan State University, Shymkent, Kazakhstan, 6-7 December 2012, pp 96-100. ISBN 9965-03-274-2

Page 50: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 50of72

209. J M Khatib, C. Humphries, C Egenti, G. Zh. Yeligbayeva, G. A. Mun. (2012), Early-Strength Properties of Concrete with High Volume Metakaolin”. International scientific conference «AUEZOV READING – 11: «Kazakhstan on the way of social education: Innovative directions of research, education and culture», M. Auezov South Kazakhstan State University, Shymkent, Kazakhstan, 6-7 December 2012, pp 91-96. ISBN 9965-03-274-2

210. B.A. Herki, J M Khatib, D. Searle, P. Georgakis, G. A. Mun. (2012) “Capillarity of

Concrete Incorporating Waste Polystyrene”. International scientific conference «AUEZOV READING – 11: «Kazakhstan on the way of social education: Innovative directions of research, education and culture», M. Auezov South Kazakhstan State University, Shymkent, Kazakhstan, 6-7 December 2012. pp 198-202. ISBN 9965-03-274-2

211. J M Khatib, S. Sharif , G. Zh. Yeligbayeva. (2012) “Flexural Behaviour of Reinforced

Concrete Beams Containing Foamed Glass as Aggregate Replacement”. International scientific conference «AUEZOV READING – 11: «Kazakhstan on the way of social education: Innovative directions of research, education and culture», M. Auezov South Kazakhstan State University, Shymkent, Kazakhstan, 6-7 December 2012, pp 103-107. ISBN 9965-03-274-2

212. El-Sayed Moussa Negim, Jamal Khatib, Gulzhakhan Zh. Yeligbayeva , Mun

G.A.Muhammad Idiris Saleh (2012). “Preparation and Characterization of Polyvinyl Alchool-Urea Adduct and its Application in Cement Paste”. International scientific conference «AUEZOV READING – 11: «Kazakhstan on the way of social education: Innovative directions of research, education and culture», M. Auezov South Kazakhstan State University, Shymkent, Kazakhstan, 6-7 December 2012, pp 66-69. ISBN 9965-03-274-2

213. El-Sayed Moussa Negim, Urkimbaeva Perizat Ibragimovna, Jamal Khatib,

Abetayeva Saltanat Abulgazievna, Muhammad Idiris Saleh. (2012) “The Effect of Tri-Polymers on Physico-Mechanical Properties of Cement”. International scientific conference «AUEZOV READING – 11: «Kazakhstan on the way of social education: Innovative directions of research, education and culture», M. Auezov South Kazakhstan State University, Shymkent, Kazakhstan, 6-7 December 2012, 60-63. ISBN 9965-03-274-2

214. B.A. Herki, J.M. Khatib, D. Searle, P. Georgakis, S Fırat. (2013), “Properties of

Lightweight Concrete Prepared with Waste Polystyrene and Fly Ash”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 27-38, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

215. B.A. Herki, J.M. Khatib, D. Searle, P. Georgakis (2013), “Capillarity Of Lightweight

Concrete Incorporating Waste Expanded Polystyrene, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 39-49, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

216. Alaa Hamood, Jamal M Khatib, Seyhan Fırat and Craig Williams (2013),

“Engineering Properties Of Cement-Based Materials Incorporating Large Proportions Of High Loss On Ignıtıon (HLOI) Fly Ash And Raw Sewage Sludge (RSS) As A Water Replacement” , 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 50-60, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

Page 51: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 51of72

217. Alaa Hamood, Jamal M Khatib and Craig Williams (2013), “The Use of Raw Sewage

Sludge (RSS) as a Water Replacement in Cement-Based Materials Incorporating High Loss on Ignition (HLOI) Fly Ash (7 Days Curing)”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 61-70, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

218. David C. Okoronkwo, Jamal M. Khatib, Nwabueze G. Emekwuru, Richard F. Hall

(2013), “Sustainability Elements of Rammed Earth”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 71-81, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

219. J M Khatib, E Kufoin, S Fırat, S Nwaubani, R Bennacer (2013), “Cement-Stabilised

Rammed Earth Containing Waste Plastic”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 82-88 ISBN: 978-605-4735-07-5, http://www.iwesm.sakarya.edu.tr/program.html

220. J. M. Khatib, S. Fırat, G. Yılmaz, S.D. Kenai, E. Gjonbalaj (2013), “Long-Term

Performance Of Cement Mortar With High Volume Metakaolin”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 89-96 ISBN: 978-605-4735-07-5, http://www.iwesm.sakarya.edu.tr/program.html

221. C. Egenti, J. M. Khatib, D. Oloke (2013), “A Pilot Study of the Low Utilization of

Earth for Housing Development in Urban Environments in Nigeria”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 97-107, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

222. C. Egenti, J. M. Khatib, D. Oloke, S Firat (2013), “Enhanced Compressed Earth

Blockwalls in the Context of the Eurocode”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 108-114 ISBN: 978-605-4735-07-5, http://www.iwesm.sakarya.edu.tr/program.html

223. S. Adu-Amankwah, J.M. Khatib, L.K.A. Sear and D.E. Searle (2013), “Alkali-

Activation of High Loss on Ignition (LOI) Pulverized Fuel Ash”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 115-125 ISBN: 978-605-4735-07-5, http://www.iwesm.sakarya.edu.tr/program.html

224. J M Khatib, S Sharif, S Fırat, N Bella (2013), Strain Distribution of Reinforced

Concrete Beams Containing Foam Glass”, 2nd International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 126-135, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

225. C Egenti, J M Khatib, D Oloke (2013), “Challenges of Culture in modernity: A case of

enhancement of compressed earth for social acceptability in Nigeria”, 2013 World Architecture Day, Culture and Architecture. The Nigerian Institute of Architects, Edo State Chapter, Benin City, Nigeria, 7th October, 2013.

Page 52: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 52of72

226. J M Khatib, I A Kawu, S Kenai, M Tarekuddin (2013), “Progressive Collapse Analysis And Design: The Simplified Linear Static Approach”, II International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 136-152 ISBN: 978-605-4735-07-5, http://www.iwesm.sakarya.edu.tr/program.html

227. J M Khatib, P S Mangat, L Wright (2013), “Pore Size Distribution of Cement Paste

Containing Simulated Flue Gas Desulphurisation (FGD) During the Early ISBN: 978-605-4735-07-5 Stages of Hydration , II International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 153-158, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

228. S. O. Nwaubani, J. M. Khatib, S Firat (2013), “Compressive Strength Properties of

Cement Mortars Incorporating Pulverised Glass”, II International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 159-167 ISBN: 978-605-4735-07-5, http://www.iwesm.sakarya.edu.tr/program.html

229. S. Fırat, G. Yılmaz, İ. Vural, J.M. Khatib, J. M. Kinuthia (2013), “Reducing Energy

Requirement Using Waste Materials”, II International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp 197-210, ISBN: 978-605-4735-07-5 http://www.iwesm.sakarya.edu.tr/program.html

230. N Bella, A Arsoun, J M Khatib, M Marbouh, I A Bella, B Ben Abdelkader (2013),

“How to Improve Hot Climate Concreting Procedures in Developing Countries”, Proceedings International Conference on Advances in Cement and Concrete Technology in Africa (ACCTA), Editors: Herbert C Uzoegbo and Schmidt Wolfram, Publisher: BAM Federal Institute for Materials and Testing, 28-30 January 2013, pp 105-112 , ISBN 978-3-9815360-3-4 www.bam.de

231. J M Khatib, C Humphries, S Nwabani, M Tarek Uddin (2013), “Concrete with High Volume of Metakaolin as Cement Replacement”, Proceedings International Conference on Advances in Cement and Concrete Technology in Africa (ACCTA), Editors: Herbert C Uzoegbo and Schmidt Wolfram, Publisher: BAM Federal Institute for Materials and Testing, 28-30 January 2013, pp 449-456, ISBN 978-3-9815360-3-4 www.bam.de

232. J M Khatib, L Wright, P Mangat, N Bella (2013), “Effects of Fly Ash and Gypsum on

the Pore Size Distribution of Cement Paste at 7 days of Curing”, Proceedings International Conference on Advances in Cement and Concrete Technology in Africa (ACCTA), Editors: Herbert C Uzoegbo and Schmidt Wolfram, Publisher: BAM Federal Institute for Materials and Testing, 28-30 January 2013, pp 977-982, ISBN 978-3-9815360-3-4 www.bam.de

233. B Menadi, S Kenai, S Hammat, J M Khatib (2013), “The Influence of the Fineness of Mineral Additions on Strength and Drying Shrinkage of Self-Compacting Mortars”, 14th International Conference on Non-Conventional Materials and Technologies (14thNOCMAT 2013) - Construction Materials & Technologies for Sustainability, 24th-27th March 2013, João Pessoa, Paraíba, Brazil

Page 53: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 53of72

234. E. M. Negim, J. M. Khatib, E. M. Shaikhutdinov, G. Zh. Yeligbayeva, A. S. Abulgazievna, U. Nakan (2013). “The effect of chain extension on the mechanical properties of polyurethane dispersions”. International Symposium on Modern Challenges of Higher Education and Science in the Field of Chemistry, Almaty, Kazakhstan, May, 30-31, ISBN 978-601-04-0008-5, p. 21-24, 2013.

235. E. M. Negim, J. M. Khatib, R. Raikhan, U. P. Ibragimovna, G. Irmukhametova, G. A. Mun. (2013), “The effect of grafted copolymer on the properties of portland cement mortar”. International Symposium on Modern Challenges of Higher Education and Science in the Field of Chemistry, Almaty, Kazakhstan, May, 30-31, ISBN 978-601-04-0008-5, p. 148-150, 2013.

236. J M Khatib, E. M. Negim, E. M. Shaikhutdinov, G. A. Mun (2013), “Waste plastic

inclusion in cement-stabilised rammed earth”. International Symposium on Modern Challenges of Higher Education and Science in the Field of Chemistry, Almaty, Kazakhstan, May, 30-31, ISBN 978-601-04-0008-5, p. 153-154, 2013.

237. J. M. Khatib, E. M. Shaikhutdinov, K. K. Syrmanova, E. M. Negim (2013),

“Investigating selected mortar properties containing high volume metakaolin”. International Symposium on Modern Challenges of Higher Education and Science in the Field of Chemistry, Almaty, Kazakhstan, May, 30-31, ISBN 978-601-04-0008-5, p. 155-156, 2013.

238. C. Egenti, J. M. Khatib, E. M. Negim. (2013), “Performance of compressed earth brick in comparison with the prevailing sand-cement wall construction in Nigeria”. International Symposium on Modern Challenges of Higher Education and Science in the Field of Chemistry, Almaty, Kazakhstan, May, 30-31, ISBN 978-601-04-0008-5, p. 157-158, 2013.

239. Ograbe Ahiakwo, David Oloke, Subashini Suresh, Jamal Khatib (2013), “A Case Study of Last Planner System Implementation in Nigeria”, 21st Annual Conference of the International Group for Lean Construction 2013, 29July-2 August, Fortaleza, Brazil, International Group for Lean Construction (IGLC), pp 636-644, ISBN: 978-1-63266-018-3, POD Publ: Curran Associates, Inc. (May 2014), www.proceedings.com , [email protected]

240. M Tarek Uddin, Md. Nazrul-Islam, S K Sutradhar, M H R Chowdhury, A Hasnat, and

J M. Khatib (2013), “Carbonation Coefficient of Concrete in Dhaka City”, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3), Kyoto, Japan, 18-22 August 2013.

241. S R Baggott, D Oloke, P Georgakis, J M Khatib (2013), “Risk and Security Chanllenges on Further and Higher Education Campuses”, In Smith SD and Ahiaga-Dabdui DD (Eds), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, Vol 2, pp 1171-1181, ISBN: 978-0-9552390-7-6

242. S Nwaubani, B Dube, J M Khatib (2013), “The Influence of High Volume Pulverised Fuel Ash Content and Chemical Activation on the Properties of Concrete”, 14th Waste Management Conference GzO’13 with International participation (abstract), 3 September 2013, Kulturni dom Krško, Krško, Slovenia http://www.srdit.si/gzo13/strodborENG.html

Page 54: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 54of72

243. J M Khatib, S Nwaubani, S Firat, S D Kenai, B Menadi (2013), “Rammed earth Construction Materials Incorporating Waste Plastic and Stabilised with Cement”, 14th Waste Management Conference GzO’13 with International participation (abstract), 3 September 2013, Kulturni dom Krško, Krško, Slovenia. http://www.srdit.si/gzo13/strodborENG.html

244. E. M. Negim, J. M. Khatib, K. K. Syrmanova, Sh. B. Baizhanova, N. E. Botabaev, A. M. Tuleuov (2013), “Effect of vinyl acetate water-soluble graft polymer on the rheological properties of Portland cement mortar”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 42-48, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

245. E. M. Negim, J. M. Khatib, K. K. Syrmanova, Sh. B. Baizhanova, N. E. Botabaev, A.

M. Tuleuov (2013), “Effect of polymer latex on the physico-mechanical properties of ordinary Portland cement”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 61-66, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

246. C. Egenti, J. M. Khatib, D. Oloke (2013), “Analysis of expansion and water

absorption of composite compressed earth block”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp122-128, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

247. C. Egenti, J. M. Khatib, D. Oloke (2013), “High carbon fly ash and soil in a

composite compressed earth block”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp143-149, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

248. J. M. Khatib, E. Kufoin, S. Khatib, S. Nwaubani, S. Firat (2013), “Rammed earth

construction materials incorporating waste plastic and stabilised with cement”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 257-263, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

249. A. Hamood, J. M. Khatib, S. Firat and C. Williams (2013), “The Utilization of Raw

Sewage Sludge (RSS) as a Water Replacement in Cement-Based Materials Incorporation Large Proportions of Fly Ash (90 and 180 Curing Days)”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 264-273, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

250. J. M. Khatib, C. Halliday, S. E. Negim, S. Firat (2013), “Lime activation of fly

ash/metakaolin paste”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 274-281, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

Page 55: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 55of72

251. G. N. Sağlam, I. Vural, S. Firat, G. Yilmaz, J. M. Khatib (2013), “Improvement of CBR Results by Using Waste Materials”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 314-321, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

252. A Hamood, J. M. Khatib and C. Williams (2013), “Engineering Properties of Cement-

Based Materials Incorporating Raw Sewage Sludge (RSS) and High Loss on Ignition (LOI) Fly Ash (365 Days Curing)”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 322-330, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

253. S. Adu-Amankwah, J.M. Khatib, L.K.A. Sear and D. E. Searle (2013), “Novel

admixtures for regulating setting times of alkali-activated Run-off Station fly ash”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September, Gazi University, Ankara, Turkey, pp 422-429, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

254. K. Ontürk, S. Firat, I. Vural and J. M. Khatib (2013), “Improvement of Road Sub-

base Fill by Using Waste Marble Dust and Fly Ash”, 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 458-470, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

255. I. Vural, G. N. Sağlam, S. Firat, G. Yilmaz, J. M. Khatib (2013), “Increasing

Compaction Properties of Road Subbase Fill Using Waste Materials of Steel Slag and Fly Ash” , 1st International Conference & Exhibition, Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction, 16-18 September 2013, Gazi University, Ankara, Turkey, pp 500-505, http://renewbuild.org/?page=homepage, ISBN: 978-975-507-268-5

256. J M Khatib, E S M Negim, U Kakan, G Zh Yeligbayeva (2013), “Rammed earth Incorporating waste Plastic and Stabilised with 6% Cement and Cured for Seven Days”, Proceedings of the VII Internatinal Symposium, Combustion & Plasmochemistry, to the memory of Academian A G Merzhanov, Almaty, Khazakhstan, 18-20 September, pp 255-258, ISBN 978-601-04-0134-1, [email protected]

257. D C Okoronkwo, J M Khatib, N G Emekwuru, R Hall (2013), “The Rammed Earth

House in Nigeria”. Proceedings of X Congreso Internacional de Construcción con Tierra - Tradición e innovación, X CiaTTI 27-29 Sept 2013. http://www.elcorreodelsol.com/articulo/27-29-de-septiembre-x-congreso-internacional-de-construccion-con-tierra-tradicion-e

258. D C Okoronkwo, J M Khatib, N G Emekwuru, R Hall (2013), “Use of Modified

Aggregate in Rammed Earth”. Proceedings of the 7th international Earth building conference USA 4-6 October 2013. pp 326-332. ISBN 978-0-9824660-3-2. http://greenfiretimes.com/2013/08/earth-usa-2013-the-seventh-international-earthen-architecture-and-construction-conference/

259. J M Khatib, M Sonebi, E Kufoin, S Firat (2013), “Rammed earth incorporating waste

plastic and stabilised with cement”, (Abstracts only), Proceeding of the CMSS2013 International Congress on Materials & Structural Stability – Building up Sustainable materials & Constructions, Rabat, Morocco, 27-30 November 2013, p. 64. www.fsr.ac.ma/cmss/ang/

Page 56: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 56of72

260. M. Sonebi, J. Khatib, W. Schmidt (2013), “Influence of the type of viscosity-

modifying admixtures and metakaolin on the rheology of grouts”, (Abstracts only), Proceeding of the CMSS2013 International Congress on Materials & Structural Stability- Building up Sustainable materials & Constructions, Rabat, Morocco, 27-30 November 2013, p. 92. www.fsr.ac.ma/cmss/ang/

261. M. Hassan, J. M. Khatib, P. S. Mangat, A. Naseef and P.H.E. Gardiner (2013),

“FTIR and XRD characterized lime stabilised lead contaminated soil”, 2nd International Conference on Environment, Chemistry and Biology - ICECB 2013, 13-14 December 2013, Stockholm, Sweden, co-sponsored by Asia-Pacific Chemical, Biological & Environmental Engineering Society (APCBEES). , www.cbees.org http://www.icecb.org/index.htm

262. J M Khatib, C. Halliday, E S M Negim, S M Khatib, K K Syrmanova (2013), “Activation of Fly Ash-Metakaolin Paste Using Lime”. International Scientific-Practical Conference. Development of Science, Education and Culture of Independent Kazakhstan in Conditions of Global challenges of Modernity. Shymkent, Kazakhstan, pp. 127-131, December 2013. ISBN 9965-03-295-5

263. J M Khatib, E.S.M. Negim, G. Yilmaz, K.K. Syrmanova, S. Shilibekov (2013),

“Incorporation of Shredded Waste Plastic in Cement Stabilized Rammed Earth”, International Scientific-Practical Conference. Development of Science, Education and Culture of Independent Kazakhstan in Conditions of Global challenges of Modernity. Shymkent, Kazakhstan, pp. 226-229, December 2013. ISBN 9965-03-295-5

264. S Kenai, W Yahiaoui, B Menadi, J Khatib (2014), “Effect of Hot Climate on the Performance of SCC Containing Slag”, Internatıonal Civil Engineering & Architecture Symposium for Academicians- ICESA 2014, 17-20 May 2014, Antalya, Turkey, pp71-77, http://www.icesa2014.org/

265. S Kenai, B Medani, J M Khatib (2014), “Low carbon building materials for

sustainable construction”, ACEM’14 – The 2014 World Congress on Advances in Civil, Environmental, and Materials Research, BEXCO, Busan, Korea 24-28 August, (Chairman: Chang-Koon Choi), in cooperation with Techno-Press Journals, http://acem.cti3.com/acem14.htm

266. Sunny O. Nwaubani, S. Oshenye, Molly W. Jack, Jamal M. Khatib (2014), “An

investigation into the influence of silica fume on the performance of concrete”, 15th Conference with International Participation-Waste Management-GzO’14, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia, 27-28 August, (Editors: S Nwaubani and J Kortnik), ID 15, pp 89-98, www.srdit.si/gzo14/1iNFOGzO14ENG.pdf

267. Jamal M. Khatib, C. Halliday, Sunny O. Nwaubani, E. Negim (2014), “Fly ash paste

activated with lime and metakaolin”, 15th Conference with International Participation-Waste Management-GzO’14, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia, 27-28 August, (Editors: S Nwaubani & J Kortnik), ID 16, pp 99-102, www.srdit.si/gzo14/1iNFOGzO14ENG.pdf

Page 57: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 57of72

268. Jamal M. Khatib, L. Wright, P.S. Mangat, Sunny O. Nwaubani (2014), “Long-term effect of simulated desulphurised waste on porosity and pore size distribution of cement pastes”, 15th Conference with International Participation-Waste Management-GzO’14, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia, 27-28 August, (Editors: S Nwaubani & J Kortnik), ID 17, pp103-110, www.srdit.si/gzo14/1iNFOGzO14ENG.pdf

269. J M Khatib, L Wright, P S Mangat (2014), Potential use of desulphurised waste residues in construction applications, Decades of Infrastructure Investment (DII)-Proceedings of the International Conference on Infrastructure Development and Investment Strategies for Africa, (Eds: I Musonda & CO Aigbavboa), DII-2014, 25-26 September 2014 Livingstone, Zambia, DII-2014-042, pp 105-113, Pub: University of Johannesburgh (South Africa), ISBN 978-0-86970-782-1, E-mail: [email protected] [email protected]

270. J M Khatib, C Halliday, S Kenai, E Negim (2014), “Incorporation of Metakaolin in Lime Activated Fly Ash Paste”, 3rd International Seminar: Innovation and Valorisation in Civil Engineering & Construction, INVACO’2014, Houari Boumediene University of Science and Technology, Algiers, Algeria, 17-18 November 2014, Vol. 1, pp 362-364, [email protected] [email protected] http://www.usthb.dz

271. J M Khatib, L Wright, P S Mangat, B Menadi (2014), “Effect of Incorporating

Desulphurised Waste on Porosity and Pore Size Distribution of Cement Pastes During the Early Ages of Curing”, 3rd International Seminar: Innovation and Valorisation in Civil Engineering & Construction, INVACO’2014, Houari Boumediene University of Science and Technology, Algiers, Algeria, 17-18 November 2014, Vol. 1, pp 365-370, [email protected] [email protected] http://www.usthb.dz

272. J.M. Khatib, E. Onaidhe, S.E.M. Negim, G.A. Mun, K. Zhantasov (2014), “Fly ash paste activated with lime incorporating metakaolin”, Proceeding of International Forum on “Engineering Education and Science in the XXI Century: Challenges and Perspectives” – Devoted to the 80th Anniversary of Satpaev Kazntu, Volume 1, 22–24 October 2014, Kazakh National University under the auspices of the Ministry of Education and Science, Almaty City Akimat, Kazakhstan , pp501-504, ISBN 978-601-228-666-3

273. J.M. Khatib, C. Halliday, E.S.M. Negim, S. Khatib (2014), “Аctivation of fly ash paste

with lime in the presence of small amount of metakaolin”, Proceeding of International Forum on “Engineering Education and Science in the XXI Century: Challenges and Perspectives” – Devoted to the 80th Anniversary of Satpaev Kazntu, Volume 1, 22–24 October 2014, Kazakh National University under the auspices of the Ministry of Education and Science, Almaty City Akimat, Kazakhstan , pp504-506, ISBN 978-601-228-666-3

274. J.M. Khatib, L. Wright. P.S. Mangat, G. Zh. Yeligbayeva, E.M. Shaikhutdinov (2014),

“Porosity and pore size distribution of cement pastes incorporating simulated desulphurised waste: part 1 - early age curing”, Proceeding of International Forum on “Engineering Education and Science in the XXI Century: Challenges and Perspectives” – Devoted to the 80th Anniversary of Satpaev Kazntu, Volume 1, 22–24 October 2014, Kazakh National University under the auspices of the Ministry of Education and Science, Almaty City Akimat, Kazakhstan, pp507-510, ISBN 978-601-228-666-3

Page 58: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 58of72

275. J.M. Khatib, C. Egenti (2014), “Вehaviour of shelled compressed earth blocks under

load”, Proceeding of International Forum on “Engineering Education and Science in the XXI Century: Challenges and Perspectives” – Devoted to the 80th Anniversary of Satpaev Kazntu, Volume 1, 22–24 October 2014, Kazakh National University under the auspices of the Ministry of Education and Science, Almaty City Akimat, Kazakhstan, pp510-513, ISBN 978-601-228-666-3

276. S.E.M Negim, J.M. Khatib, L. Bekbayeva, G. Zh Yeligbayeva, E.M. Shaikhutdinov,

G.A. Mun (2014), “Utilization of methoxypolyoxyethylene-g-poly maleic anhydride as polymeric admixture to Portland cement mortar”, Proceeding of International Forum on “Engineering Education and Science in the XXI Century: Challenges and Perspectives” – Devoted to the 80th Anniversary of Satpaev Kazntu, Volume 1, 22–24 October 2014, Kazakh National University under the auspices of the Ministry of Education and Science, Almaty City Akimat, Kazakhstan, pp524-527, ISBN 978-601-228-666-3

277. S.E.M. Negim, J.M. Khatib, L. Bekbayeva, G.A. Yeligbaeva, E.M. Shaikhutdinov, U.,

Nakan, G.A. Mun, S.A. Abetayeva (2014), “Studying the workability and strength of self-compacting concrete containing novel superplastizer based on food waste/itaconic acid blended”, Proceeding of International Forum on “Engineering Education and Science in the XXI Century: Challenges and Perspectives” – Devoted to the 80th Anniversary of Satpaev Kazntu, Volume 1, 22–24 October 2014, Kazakh National University under the auspices of the Ministry of Education and Science, Almaty City Akimat, Kazakhstan , pp528-532, ISBN 978-601-228-666-3

278. E. Onaidhe, J.M. Khatib, M Sonebi, S Khatib, G Zh Yeligbayeva, E.M. Shaikhutdinov

(2014), “Production of mortar using rice husk ash and metakaolin activated with lime”, Proceeding of International Forum on “Engineering Education and Science in the XXI Century: Challenges and Perspectives” – Devoted to the 80th Anniversary of Satpaev Kazntu, Volume 1, 22–24 October 2014, Kazakh National University under the auspices of the Ministry of Education and Science, Almaty City Akimat, Kazakhstan, pp532-535, ISBN 978-601-228-666-3

279. J.M.Khatib, L. Wright, P.S. Mangat, K.K. Syrmanova, M Sakhy (2014),, “Porosity

and pore size distribution of cement pastes incorporating simulated desulphurised waste: Part 2 - long term curing”, International Conference of Industrial Technologies and Engineering ICITE 2014, M.Auezov South Kazakhstan State University, Shymkent, Kazakhstan, Abstract Book, pp19-20 ISBN 978–9965–03-319–3

280. J.M. Khatib, E. Onaidhe, S.E.M. Negim, G.A. Mun, K. Zhantasov (2014),, “Fly ash

paste activated with lime incorporating metakaolin”, International Conference of Industrial Technologies and Engineering ICITE 2014, M.Auezov South Kazakhstan State University, Shymkent, Kazakhstan, Abstract Book, p21, ISBN 978–9965–03-319–3

281. J M Khatib, R Siddique, C Halliday, S Khatib (2014), “Lime activated fly ash paste in the presence of metakaolin”, 2nd International Conference on Sustainable Civil Engineering Structures and Construction Materials (SCESCM 2014), Procedia Engineering, Elsevier, Vol 95, pp 415-418, doi: 10.1016/j.proeng.2014.12.200

Page 59: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 59of72

282. Jamal M Khatib, E Kufoin, C Egenti, M Tarekuddin (2014), “Cement-stabilised

rammed earth containing waste plastic”, Infrastructure, Economic Development and Built Environment: A Book of Reading, “Eds: Olujimi JAB, Ogunsote OO, Awodele AO”, Federal University of Technology, Akure, Nigeria, Chapter 44, pp 383- 385, ISBN 978-978-942-144-2

283. Jamal M Khatib, E Gjonbalaj, D Okoronkwo, E S Negim (2014), “Early age strength of high volume metakaolin mortar”, Infrastructure, Economic Development and Built Environment: A Book of Reading, “Eds: Olujimi JAB, Ogunsote OO, Awodele AO”, Federal University of Technology, Akure, Nigeria, Chapter 44, pp 387- 390, ISBN 978-978-942-144-2

284. A. Hamood, J. M. Khatib (2015), “The Use of Raw Sewage Sludge (RSS) as a

Water Replacement in Concrete Mixes”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp1-7, ISBN 978-975-06-1786-7

285. S. Fırat, G. Yılmaz, G. N. Sağlam, İ. Vural, J. M. Khatib (2015), “Waste Material

Treatment: An Experimental Study on Road Subbase Construction Using Steel Slag and Fly Ash”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp74-83, ISBN 978-975-06-1786-7

286. O. M. Okeyinka, D. A. Oloke, J. M. Khatib (2015), “A Review of Wastepaper as a

Resource for Sustainability in The Construction Industry”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp 133-144, ISBN 978-975-06-1786-7

287. J. M. Khatib, E. Onaidhe, S. Khatib, B. Işıkdağ, S. U. Umu (2015), “Activating Rice

Husk Ash in Mortar Applications”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp145-151, ISBN 978-975-06-1786-7

288. J. M. Khatib, L. Wright, P. S. Mangat, G. Yilmaz, R. Bennacer (2015), “Early Age

Curing Effect of Simulated Desulphurised Waste on Porosity and Pore Size Distribution of Cement Pastes”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp 152-156, ISBN 978-975-06-1786-7

289. E. M. Negim, J. M. Khatib, L. Bekbayeva (2015), “Effect of Novel Superplasticizer

on The Workability of Self-Compacting Concrete Containing High Volume Fly Ash”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp157-162, ISBN 978-975-06-1786-7

Page 60: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 60of72

290. S. Chandra, J. M Khatib, G. Yilmaz, S. Firat (2015), “Effect of Waste Cooking Oil and Cement on Water Ingress in Rammed Earth”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp163-169, ISBN 978-975-06-1786-7

291. E. M. Negim, J. M. Khatib, L. Bekbayeva (2015), “Investigating The Flowability of

Self-Compacting Concrete Containing Novel Superplasticizer”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp170-176, ISBN 978-975-06-1786-7

292. J. M. Khatib, L. Wright, P. S. Mangat, S. Firat, S. Negim (2015), “Long-Term Curing

Effect of Simulated Desulphurised Waste on Porosity and Pore Size Distribution of Cement Pastes”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp177-181, ISBN 978-975-06-1786-7

293. D. Ogan, I. Ndekugri, J.M. Khatib, C. Oduoza (2015), “Mining Wastes Generation

and Storage in The Ecowas: A Call for Appropriate Regulation and Review of Trending Techniques”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp182-195, ISBN 978-975-06-1786-7

294. J.M. Khatib, C. Halliday, S. Khatib, G. Yilmaz, S. Firat (2015), “Using Small Amount

of Metakaolin in Lime Activated Fly Ash Paste”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp196-229, ISBN 978-975-06-1786-7

295. C Egenti, J. M. Khatib (2015), “Strain in Compressed Earth Blocks with Increase in

Stress”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp230-235, ISBN 978-975-06-1786-7

296. C Ezeah, B. Ohiaeri, J. M. Khatib (2015), “A Review of the Impact of Climate

Change on The Built Environment of Rural Tropical Regions”, 3rd International Workshop on earthquake and Sustainable Materials (IWESM), held on 24 June 2014, (Editors: G Yilmaz & S Firat), Anadolu University, Porsuk Vocational School, Eskisehir, Turkey, pp236-249, ISBN 978-975-06-1786-7

297. Hakim Abdelgader, Ali El-Baden and Jamal M Khatib (2015), “Concrete Repair

Using Two Stage Concrete”, XXVII conference on Structural Failures, Awarie Budowlane, Szczecin-Międzyzdroje, 20-23 May 2015, , pp729-734 http://www.awarie.zut.edu.pl/

298. H S Abdelgader, J. M. Khatib, A S El-Baden (2015), “Self-Compacting grout to

Produce Two-Stage Concrete”, 2nd International Sustainable Buildings Symposium (ISBS 2015), 28-30 May 2015, Gazi University, Ankara, Turkey, pp30-36 http://www.isbs2015.gazi.edu.tr ISBN: 978-975-507-278-4

Page 61: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 61of72

299. H S Abdelgader, J. M. Khatib, A S El-Baden (2015), “New Concrete Mix Design Approach”, 2nd International Sustainable Buildings Symposium (ISBS 2015), 28-30 May 2015, Gazi University, Ankara, Turkey, pp366-371 http://www.isbs2015.gazi.edu.tr ISBN: 978-975-507-278-4

300. O M Okeyinka, D A Oloke, J. M. Khatib (2015), “Self-Compacting grout to Produce

Two-Stage Concrete”, 2nd International Sustainable Buildings Symposium (ISBS 2015), 28-30 May 2015, Gazi University, Ankara, Turkey, pp406-410 http://www.isbs2015.gazi.edu.tr ISBN: 978-975-507-278-4

301. J. M. Khatib, E Onaidhe, M Sonebi, H Abdelgader (2015), “Lime activation of fly ash in mortar in the presence of metakaolin”, Proceedings of the 1st International Conference on Bio-based Building Materials (ICBBM 2015), Eds. Amziane & Sonebi, 21-24 June 2015, Claremont-Ferrand, France. RILEM publication, pp 107-110, ISBN PRO 99: 978-2-35158-154-4 https://sites.google.com/site/icbbm2015/home

302. J. M. Khatib, L Wright, P S Mangat, M Sonebi (2015), “Influence of simulated

desulphurised waste on the pore size distribution of cement pastes at 28 days of curing”, Proceedings of the 1st International Conference on Bio-based Building Materials (ICBBM 2015), Eds. Amziane & Sonebi, 21-24 June 2015, Claremont-Ferrand, France. RILEM publication, pp 122-125, ISBN PRO 99: 978-2-35158-154-4 https://sites.google.com/site/icbbm2015/home

303. J. M. Khatib, L Wright, P S Mangat, M Sonebi (2015), “Desulphurised residues

effect on the porosity and pore size distribution of cement pastes during the early ages of curing”, Proceedings of the 1st International Conference on Bio-based Building Materials (ICBBM 2015), Eds. Amziane & Sonebi, 21-24 June 2015, Claremont-Ferrand, France. RILEM publication, pp 138-140, ISBN PRO 99: 978-2-35158-154-4 https://sites.google.com/site/icbbm2015/home

304. C Egenti, J. M. Khatib (2015), “Effects of shell element on shelled compressed

earth masonry block units”, Proceedings of the 1st International Conference on Bio-based Building Materials (ICBBM 2015), Eds. Amziane & Sonebi, 21-24 June 2015, Claremont-Ferrand, France. RILEM publication, pp 363-367, ISBN PRO 99: 978-2-35158-154-4 https://sites.google.com/site/icbbm2015/home

305. M Sonebi, S Wana, S Amziane, J. M. Khatib (2015), “Investigation of the mechanical

performance and weathering of hemp concrete”, Proceedings of the 1st International Conference on Bio-based Building Materials (ICBBM 2015), Eds. Amziane & Sonebi, 21-24 June 2015, Claremont-Ferrand, France. RILEM publication, pp 416-421, ISBN PRO 99: 978-2-35158-154-4 https://sites.google.com/site/icbbm2015/home

306. O M Okeyinka, D A Oloke, J. M. Khatib (2015), “A review of recycle use of post-

consumer waste paper in construction”, Proceedings of the 1st International Conference on Bio-based Building Materials (ICBBM 2015), Eds. Amziane & Sonebi, 21-24 June 2015, Claremont-Ferrand, France. RILEM publication, pp 711-717, ISBN PRO 99: 978-2-35158-154-4 https://sites.google.com/site/icbbm2015/home

307. E S M Negim, R. Iskakov, G A Mun, G Zh Yeligbayeva, K K Syrmanova, J M Khatib

(2015), “Effect of Copolymer Latexes on Workability and Strength Properties of Mortar Containing High Volume Fly Ash as a Replacement Material of Cement”. International Conference of Industrial Technologies and Engineering (ICITE 2015), 29-30 October, Shymkent, Kazakhstan, pp 76-81, http://icite.ukgu.kz/

Page 62: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 62of72

308. Oriyomi M Okeyinka; David A Oloke; Jamal M Khatib (2015), “Recycled Use of Solid Wastes in Building Materials: A Review”, 17th International Conference on Sustainable Building and Architectural Engineering (ICSBAE 2015), Conference Code: 15FR12ICSBAE, Paris, France, Paris Conference, 30-31 December, Vol. 17, No. 12, pp3997-4007, World Academy of Science, Engineering and Technology (WASET), http://waset.org/conference/2015/12/paris/ICSBAE

309. Seyhan Firat, Gulgun Yilmaz, Isa Vural, Jamal Khatib, Seyfettin Umut Umu (2016),

1st International Workshop on Construction and Electricity Applications on Vocational Education (IWCEA 2015), held at Anadolu University on 1Dec2015, pp215-223, ISBN: 975-06-1861-1, http://iwcea2015.anadolu.edu.tr

310. E S M Negim, G Zh Yelibayeva, G A Mun, J M Khatib (2016), “Effect of copolymer latexes on physico-mechanical properties of mortar containing high volume fly ash as a replacement material of cement”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p8

311. E S M Negim, G Zh Yelibayeva, G A Mun, J M Khatib (2016), “Study the flowing

of self-compacting concrete containing novel superplasticizer based on hydroxypropyl methacrylate”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p9

312. E S M Negim, G Zh Yelibayeva, G A Mun, J M Khatib (2016), “Effect of novel

superplasticizer on workability of self-compacting concrete containing high volume fly ash as a replacement material of cement”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p10

313. J M Khatib, F Kalistilo (2016), “Effect of ground granulated blastfurnace slag

(GGBS) on the performance of self-compacting concrete (SCC)”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p11

314. J M Khatib, S Ojo (2016), “Using relatively low volume of metakaolin and silica

fume in the production of high strength concrete (HSC)”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p12

Page 63: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 63of72

315. J M Khatib, P Rastogi (2016), “Flexural behaviour of one type of glass fibre

reinforced plastic concrete beams”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p13

316. J M Khatib, Y Ozturk (2016), “High performance concrete using relatively high

volume of silisa fume and metakaolin”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p14

317. T Hender, J M Khatib, B Kite (2016), “Flexural behaviour of bolted timber and steel

composites”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p15

318. J M Khatib, S Fergusson (2016), “Structural behaviour of reinforced concrete

beams containing recycled coarse aggregates”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p16

319. J M Khatib, J Sharma (2016), “Effect of ground granulated blastfurnace slag

(GGBS) on the performance of self-compacting concrete (SCC)”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p17

320. J M Khatib, E Onoz (2016), “Dimensional stability, mechanical and physical

properties of mortar containing metakaolin and silica fume” International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p18

321. J M Khatib, M Ahmadeen (2016), “Capillary water absorption of concrete

containing small amounts of metakaolin and silica fume”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. p19

Page 64: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 64of72

322. J M Khatib, M Bullivant (2016), “Structural behaviour of monolithic, layered and

laminated glass beams”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P20

323. J M Khatib, B Harrowing (2016), “capillary water absorption of concrete

containing o blend of high reactivity pozzolan”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P21

324. J M Khatib, G Adams (2016), “Dimensional stability of metakaolin mortar subjected

to different environmental conditions”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P22

325. J M Khatib, I Kawu (2016), “Progressive collapse in building for sustainable

design”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P23

326. J M Khatib, B Malunga (2016), “Structural charateristics of reinforced light-weight

concrete beams using novel materials”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P24

327. J M Khatib, D Keeble (2016), “On the elimination of reinforcement in structural

elements through the production of ultra-high performance concrete”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P25

328. J M Khatib, J Read (2016), “Structural performance of bolted connections in glass

reinforced polymer (GRP) to achieve sustainable construction elements”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P26

Page 65: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 65of72

329. J M Khatib, L Jenkins (2016), “Investigation into the production of stabilised earth structural blocks for low rise development”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P27

330. J M Khatib, M Hoti (2016), “On the development of stabilised waste polystyrene to

produce lightweight aggregate for concrete applications”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P28

331. M Hooper, S Ziaie, J M Khatib (2016), “Sustainable design through examining the

axial response of pile groups under lateral loading and varying soil stiffness”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P29

332. J M Khatib, M Obazele (2016), “Strengthening of reinforced concrete beams

using carbon fibre to improve the sustainability of structures”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P30

333. J M Khatib, R Krishnan (2016), “Study of structural performance of reinforced

concrete beams containing voids”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P31

334. H S Abdelgader, J M Khatib (2016), “Sustainable production of two-stage

concrete (TSC)”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P32

335. O M Okeyinka, D A Oloke, J M Khatib (2016), “Using recycled waste paper as

lightweight building materials”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P34

Page 66: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 66of72

336. K S Sawalha, J M Khatib (2016), “Deriving novel chemical admixtures based on natural fibers and waste for concrete applications”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P35

337. S Chandra, J M Khatib (2016), “The sustainable, long lasting, mostly forgotten,

ancient building techniques – Rammed earth”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P36

338. C Egenti, J M Khatib, D Oloke (2016), “Development of shelled compressed earth

masonry units for sustainable housing in Nigeria”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P37

339. D C Okoronkwo, J M Khatib, N Emekwuru (2016), “Developing sustainable and

environmentally friendly building material using rammed earth”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P38

340. A M Salih, C Williams, J M Khatib (2016), “Heavy metal removal from industrial

wastewater using modified natural zeolite”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P39

341. C Ezhea, J M Khatib, A Ali (2016), “development of a framework for sustainable

construction and demolition waste management in Lybia”, International Workshop on UK Research Collaboration with Kazakhstan: Utilization and Treatment of Wastes Arising from Mining Activities, Oil and other Industries”, Abstract only, Workshop held in Almaty between 26 – 30 January 2015, sponsored by the British Council-Newton-Al-Farabi Partnership Programme. P40

342. A F Ali, C Ezeah, J M Khatib (2016), “Estimating construction and demolition (C&D) waste arising in Libya”, The 31st International Conference on Solid Waste Technology and Management, Philadelphia, PA USA, 3-6 April, pp 837-849.

http://www.geosynthetica.net/event/31st-international-conference-on-solid-waste-technology-and-management/

Page 67: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 67of72

BOOKS/BOOK CHAPTERS/THESES/EDITOR 343. J M el-Khatib (1986) “An Investigation of Criteria for Determining Transfer Times in a

Prestressed Concrete”, MSc Thesis, University of Liverpool, UK, December 1986 344. J M el-Khatib (1991) “Durability Related Properties of PFA, Slag and Silica Fume in

Concrete”, PhD Thesis, University of Aberdeen, January 1991

345. J M Khatib (2009) (Editor) “Sustainability of Construction Materials”, Book, Woodhead Publishing Limited, Cambridge, England, 1st Edition, May 2009,

[ISBN 978-1-84569-349-7] http://www.woodheadpublishing.com/en/book.aspx?bookID=1394 [Cited 30 times google scholar] 346. J M Khatib (2009), Introduction Chapter in “Sustainability of Construction Materials”,

Khatib J M (Editor), Woodhead Publishing Limited, Cambridge, England, 1st Edition, May 2009, pp xiii-xviii,

ISBN 978-1-84569-349-7] http://www.woodheadpublishing.com/en/book.aspx?bookID=1394 347. J M Khatib (2012), Chapter 12 “Progress in Eco and Resilient Construction Materials

Development”, in “Solutions for Climate Change Challenges of the Built Environment (Eds: Booth C, Hammond F, Lamond J, Proverbs D), Wiley-Blackwell Publishing, pp 141-152, ISBN 978-1-4051-9507-2

348. Z. U. Myrkhalykov, J M Khatib, M Othman (Editors) (2014), International Conference of Industrial Technologies and Engineering (ICITE 2014), Shymkent, Kazakhstan, M. Auezov South Kazakhstan State University, 30-31 October 2014, ISBN: 978-9965-03-319-3 http://icite.ukgu.kz/content/editors

349. J M Khatib (2015) (Editor): 2015 International Conference on Energy, Environmental & Sustainable Ecosystem Development EESED 2015, 21-23 August 2015, Kunming, Yunna, China. ISBN: 978-981-4719-99-5 http://www.ic3e-2015.org/

350. J M Khatib (2015) : Preface to the “ 2015 International Conference on Energy,

Environmental & Sustainable Ecosystem Development EESED 2015”, 21-23 August 2015, Kunming, Yunna, China. pp1-2 ISBN: 978-981-4719-99-5 http://www.ic3e-2015.org/

351. J M Khatib (2015) (Editor): Architectural Construction, Materials and Building

Technologies; Vol III, Selected papers presented at the 3rd Annual ATINER Conference on Architecture held on 10-13 June 2014, Athens Institute for Education and Research (ATINER), ISBN: 978-960-598-026-9 http://www.atiner.gr/

352. J M Khatib (2015): Introduction to “Architectural Construction, Materials and

Building Technologies; Vol III, Selected papers presented at the 3rd Annual ATINER Conference on Architecture” held on 10-13 June 2014, Athens Institute for Education and Research (ATINER), piii ISBN: 978-960-598-026-9 http://www.atiner.gr/

353. Z. U. Myrkhalykov, J M Khatib, M Othman (Editors) (2015), International

Conference of Industrial Technologies and Engineering (ICITE 2015), Shymkent, Kazakhstan, M. Auezov South Kazakhstan State University, 30-31 October 2015, ISBN: 978-99-65-03-397-1 http://icite.ukgu.kz/content/editors

Page 68: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 68of72

NON-REFEREED PUBLICATIONS/OTHERS

354. J M Khatib (1999), Report to King Fahd University for Petroleum and Minerals, Assessment of a research proposal , “Deterioration of reinforced concrete structures in the Gulf”. Proposer: Prof Al-Amoudi

355. J M Khatib (1999), Report to the University of Glamorgan, Assessment of a

scientific report for G Veerappan, “The development of low-cost, low-energy cement waste”.

356. J M Khatib (2002), Professional Report for Chartered Engineer Status-Direct Entry, The Institution of Engineers of Ireland - IEI (now Engineers Ireland), Dublin.

357. J M Khatib (2002) “High Strength Concrete Containing Metakaolin”, PP slides - accepted for presentation at the Institution of Structural Engineers-Yorkshire Branch, February 2002.

358. J M Khatib (2003) “Research Finds New Strength”, Plan Magazine, June 2003,

Dublin, pp 38. http://www.planmagazine.ie/ 359. J M Khatib and M Mahoney (2005) "Can the Skills Shortage in the UK Construction

Industry be Reversed? - A South Yorkshire Perspective", Building Engineer Magazine, Vol. 80, No. 10, October 2005, pp 36-44. www.abe.org.uk

360. P Watson, J M Khatib and S Lindley (2006) "A Critical Evaluation of the Partnering

Process - Part One: Rationale for Engaging in Partnering", Building Engineer Magazine, Vol. 81, No. 1, January 2006, pp 32-34. www.abe.org.uk

361. P Watson, J M Khatib and S Lindley (2006) "A Critical Evaluation of the Partnering

Process - Part Two: The Impact of Partnering", Building Engineer Magazine, Vol. 81, No. 2, February 2006, pp 25-29. www.abe.org.uk

362. P Watson, J M Khatib and S Lindley (2006) "A Critical Evaluation of the Partnering

Process - Part Three: Partnering and other Contracting Methods", Building Engineer Magazine, Vol. 81, No. 3, March 2006, pp 26-29. www.abe.org.uk

363. P Watson, J M Khatib and B Robinson (2006) "The Impact of Procure 21 (P21)

Partnering Process within the UK Construction Industry - Part One: Rationale and Profile", Building Engineer Magazine, Vol. 81, No. 12, December 2006, pp 18-21. www.abe.org.uk

364. J M Khatib, B Robinson and P Watson (2007) "The Impact of Procure 21 (P21)

Partnering Process within the UK Construction Industry - Part Two: Influence on Principal Supply Chain Partners", Building Engineer Magazine, Vol. 82, No. 1, January 2007, pp 28-31. www.abe.org.uk

365. B Robinson, P Watson and J M Khatib (2007) "The Impact of Procure 21 (P21)

Partnering Process within the UK Construction Industry - Part Three: Sustainability and Critical Success Factors”, Building Engineer Magazine, Vol. 82, No. 2, February 2007, pp 18-21. www.abe.org.uk

Page 69: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 69of72

366. J M Khatib (2008), Book review to Emerald, January, “Significance of Tests and

Properties of Concrete & Concrete-Making Materials”, Editors: J F Lamond & J H Pielert, Publisher: American Society of Testing Materials (ASTM) international, STP 169D, 664p,ISBN 0-8031-3367-7 http://info.emeraldinsight.com/products/engineering/features/promo/concrete_review.htm

367. J M Khatib (2009), Book review to Emerald, October, “Pavement Surface

Condition/Performance Assessment: Reliability and Relevancy of Procedures and Technologies-STP 1486”, Editor: Bouzid Choubane, American Society of Testing Materials (ASTM) international, STP 1486, 80p, ISBN: 978-0-8031-5521-3 http://info.emeraldinsight.com/products/engineering/features/pavement.htm?PHPSESSID=ocjt6elqsalasbd7gorvkfo2p2&

368. J M Khatib (2010), Professional Report for the Institution Of Civil Engineers (ICE)- Attributes of CEng MICE to be demonstrated at Chartered Professional Review (CPR), The Institution of Civil Engineers (ICE), London.

369. B A Herki, J M Khatib (2012), “Innovative Sustainable Lightweight Aggregate in Civil

Engineering Applications”, Power point presentation, Presented at the Seminar for UK Kurdish Students in Different Fields, Aston University, UK, 19 May 2012

370. J M Khatib (2012), “Sustainable Construction Materials; Some Recent

Development”, Presented at the Breakfast Meeting on Sustainable Construction: R & D at the University of Wolverhampton, Science Park, Wolverhampton, 20 June 2012.

371. S Firat, J M Khatib (2013), Preface and Welcome section in the proceedings of the, II International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. pp v-vi, http://www.iwesm.sakarya.edu.tr/program.html

372. J M Khatib (2013), Introductory Presentation on a British Council Supported Research Project entitled “Reducing Energy Requirements in Construction by Using Industrial By-Products” under the UK-Turkey Knowledge Partnership, II International Workshop on Earthquake and Sustainable Materials, Gazi University, 23 January 2013, Ankara, Turkey. http://www.iwesm.sakarya.edu.tr/program.html

373. D C Okoronkwo, J M Khatib, N G Emekwuru, R Hall (2013), “The optimum Moisture

Content of Rammed Earth”, Presented at the Earth Building UK (EBUK) 3rd Annual Conference & AGM, 1st-2nd February 2013. http://www.ebuk.uk.com/2013-conference/

374. J M Khatib, P L Owens (2013), Research Meeting at the House of Common, WLV Insider, University of Wolverhampton Newsletter, April 2013, http://www.wlv.ac.uk/staff/Default.aspx?page=9531

375. J M Khatib (2013), “Research in Construction Materials at the University of Wolverhampton”, Presented at the Seminar on “Researching the Future of Structural Concrete” held at the University of Wolverhampton on 20th June 2013 targeted at industrialists.

376. J M Khatib (2014), First Year Report to the British Council; British Council Award

(TR/012012/KP04) (£15,900): UK-Turkey HE Partnership Programme. “Reducing Energy Requirements in Construction by Using Industrial By-Products”. University of Wolverhampton and Sakarya University.

Page 70: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 70of72

377. P L Owens, J M Khatib (2013), “Concrete development tackled by student”, Insider,

University of Wolverhampton Newsletter, July 2013, http://www.wlv.ac.uk/Default.aspx?page=36113

378. J M Khatib (2014), Interim Report to the EU commission; European Research

proposal - FW/JR rea.p.2(2011) – Marie Curie Action-International Incoming Fellow (IIF)- IIF – Proposal Number 300427 – Project Acronym: ProSec. Call identifier: FP7-PEOPLE-2011

379. J M Khatib (2014), “Sustainable Construction Materials – Use of Desulphurised Waste”, Presented at the Annual Research Conference, Group-A- Environment, Sustainability and Transformation, ERAS Programme, University of Wolverhampton, 17th June 2014, www.wlv.ac.uk/doctoralcollege

380. J. M. Khatib (2014), Introductory speech at the Third (III) International Workshop on Earthquake and Sustainable Materials, Anadolou University, 24 June 2014, Eskeshir, Turkey, under the British Council UK-Turkey Knowledge Partnership. http://iwesm2014.anadolu.edu.tr/en

381. J M Khatib (2014), “Utilisation of Desulphurised Waste Residues in Construction”,

Presented at the Third (III) International Workshop on Earthquake and Sustainable Materials, Anadolou University, 24 June 2014, Eskeshir, Turkey, Under the British Council UK-Turkey Knowledge Partnership. http://iwesm2014.anadolu.edu.tr/en

382. J M Khatib (2014), Second Year Report to the British Council; British Council Award (TR/012012/KP04) (£15,900): UK-Turkey HE Partnership Programme. “Reducing Energy Requirements in Construction by Using Industrial By-Products”. University of Wolverhampton and Sakarya University.

383. J M Khatib (2014), “Using Metakaolin in Cement Based Applications”, Keynote Lecture, Presented at the University of Blida, Civil Engineering Department, Blida, Algeria, 16 November 2014,

384. J M Khatib (2014), “Metakaolin: 20 Years of Research”, Keynote Lecture,

Presented at the 3rd International Seminar: Innovation and Valorisation in Civil Engineering & Construction, INVACO’2014, Houari Boumediene University of Science and Technology, Algiers, Algeria, 17-18 November 2014, [email protected] [email protected] http://www.usthb.dz

385. J M Khatib (2015), “Introductory Speech”, UK and Kazakhstan Early Researchers

Workshop on Waste Utilisation and Treatment, Research Collaboration between UK and Kazakhstan, Newton-Al-Farabi Partnership Programme, 27-31 January 2015, Almaty – Kazakhstan

386. J M Khatib (2015), “Utilisation of Metakaolin in Construction applications”, Keynote

Lecture, UK and Kazakhstan Early Researchers Workshop on Waste Utilisation and Treatment, Research Collaboration between UK and Kazakhstan, Newton-Al-Farabi Partnership Programme, 27-31 January 2015, Almaty – Kazakhstan

Page 71: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 71of72

387. J M Khatib (2015), Periodic Report to the EU commission; European Research

proposal - FW/JR rea.p.2(2011) – Marie Curie Action-International Incoming Fellow (IIF)- IIF – Proposal Number 300427 – Project Acronym: ProSec. Call identifier: FP7-PEOPLE-2011

388. J M Khatib (2015), Final Report to the EU commission; European Research

proposal - FW/JR rea.p.2(2011) – Marie Curie Action-International Incoming Fellow (IIF)- IIF – Proposal Number 300427 – Project Acronym: ProSec. Call identifier: FP7-PEOPLE-2011

389. J M Khatib (2015), Final Report to the British Council; British Council Award

(Project No: 150778454) (£44,200): Newton-Al-Farabi Partnership Programme- British Council Researcher Links Programme. “Utilisation and Treatment of wastes arising from mining activities, oils and other Industries: a) Mining solid wastes; b) Mining waste water; c) Oil and Gas industry waste; d) Coal power station wastes; e) Cement manufacture waste and e) Food waste”, held between 27-31Jan15, Satpayev KazNTU & Al-Farabi Universities, Almaty, Kazakhstan, (Coordinator: University of Wolverhampton).

390. J M Khatib (2016), Review for a book entitled, “Cement and Concrete Mineral

Admixtures”, Author: M Tokyay, Middle Eastern Technical University, Publisher: CRC-Taylor and Francis, January

Page 72: CV-jamal Khatib-for Linkedin&RG-v12

Curriculum Vitae: Pof J Khatib Version: May 5, 2016

Page 72of72