Marjan PETROVSKI07/02/1975

Quality, Health, Safety and Environment Manager

Basic Information:

Name: Petrovski Marjan

Date of birth: 07/02/1975

Nationality: Macedonian

Driving License: B

Languages

1. Macedonian – mother tongue

2. English – fluent

Education :

Formal education

1993 – 2000, Occupational Health and Safety Engineer, Faculty of Mechanical Engineering,

University “St. Cyril and Methodius”, Skopje, R. Macedonia

1989 – 1993, Mechanical High School “Pance Arsovski”, Skopje, R. Macedonia

Training Course

2002, Sofia, Bulgaria - Water treatment training course, Regional Environment Center for

Central and Eastern Europe

2002, Ohrid, Macedonia - Training course for radiation safety in industry, IAEA (International

Atomic Energy Agency)

2003, Participation in the Workshop for Project Cycle Management (General) – JICA (Japan

International Cooperation Agency ) Project Formulation Study Team

2002 – 2003, Case study for Strengthening of Capacity Building in Cleaner Production in

Macedonia, UNIDO program & Czech CPC

2003, Regional Train – the – Trainers Course on radiation safety in industrial radiography and

industrial irradiators – National Radiological Protection Board Leeds United Kingdom,

International Atomic Energy Agency in co-operation with the Government of the United Kingdom

of Great Britain and Northern Ireland

2004, Training course in Seminar on Clean Development Mechanism/Joint Implementation for

South East Europe ( JICA / UNIDO Joint Program ) at United Nations Industrial Development

Organization (UNIDO), Japan International Cooperation Agency under the International

1

Cooperation of the Government of Japan;

2008, Hazard Identification and Risk Assessment (HIRA) Training Course, IRCA Global;

2008, Root Cause Analysis Technique (RCAT) Training Course IRCA Global;

2008, Lock Out/Tag Out Training Course - IRCA Global;

2008, Confined Space Training Course - IRCA Global;

2010, QMS Standard ISO 9001:2008 Internal Auditor according to ISO 19011:2002 Training

course – BUREAU VERITAS;

2010, EMS ISO 14001:2004 Internal Auditor Training course – BUREAU VERITAS;

2010, Occupational Health & Safety Management Systems OHSAS 18001:2007, Internal

Auditor Training course - BUREAU VERITAS;

2011, Training for safety adviser for the transport of dangerous goods, Ministry of Transport

and Connections of Republic of Macedonia;

2011, Basic Radiation Safety, BINDT, British Institute for Non Destructive Testing;

2011, ISO/IEC 14001:2004 Lead/External auditor training course - RABQSA International,

Personnel & Training Certification, IRCA approved certificate;

2012, Trainer for scaffolding fitter and inspector

2012 , LEEA Level II certificate

2012 ,Trainer for offshore crane operators

2012,Trainer for forklift operators

2013 , PT Level II certificate

Work experience:

2010 – Present, APAVE, Responsible HSE Manager

Responsible for implementation of an integrated and harmonized HSE system of APAVE

International and all the subsidiaries, responsible for all HSE issues within the organization

Development and implementation of IMS, in accordance to ISO9001, ISO14001 and

OHSAS18001 requirements in APAVE Ghana, subsidiary of APAVE International

Development and implementation of IMS, in accordance to ISO9001, ISO14001 and

OHSAS18001 requirement in APAVE Equatorial Guinea, subsidiary of APAVE International

Consulting services for implementation of the IMS in Dimce Banjarot Production, Macedonia,

factory for manufacturing of pressure equipment with 50 employees

Consulting services for implementation of a quality management system according to ISO9001

and OHSAS18001 for Rizam Holding, factory for manufacturing of bricks with 60 employees;

Conducted training for various clients in Africa / Asia Region in Oil & Gas industry, onshore and

offshore for scaffolding fitters and scaffolding inspectors according to International standards.

Conducted trainings for RPS for client TOTAL E&P Abu Dhabi ; TOTAL Yemen E&P;

Conducted Trainings for Rigging and Slinging for clients TOTAL E&P Yemen ; CPLO , preparing

plans for heavy lifts, supervising of lifts;

TOTAL Myanmar – CPLO , validating lift plans , supervising of heavy lifts;

MODEC Ghana – CPLO ; lift plan design , validating lift plans ; lifting supervisor

EXXON MOBIL, Jade Platform – Lifting and Rigging Supervisor

2

ORSAM, Ghana – Overhead Crane Training

ORSAM, Ghana – Rigging and Slinging Training

APAVE - Mobile Crane and Lifting Training, Rigging Training

FPSO Serpentina – Deck/ lifting and rigging supervisor

HESS offshore EG – NORM measurement

VETCO GRAY EG – forklift training and inspection of machinery

Seaweld Ghana – Various trainings ( forklift , scaffolding , WAH )

Seaweld Ivory Coast – Scaffolding training

Halliburton EG – Forklift Training

January 2010 – September 2010, Skopski Leguri dooel, factory for production of

ferroalloys - Manager for Health, Safety and Environment

Responsible for all HSE issues for 740 employees,

Implementation of ISO14001 and OHSAS18001

Responsible for optimization of the working process, including number of employees and

correspondent personnel profile in accordance to the production process , responsible for

inspection of all scaffolds established on site for major shut down and modernization of the plant

( Blast furnace No.4)

Lift plans for Heavy lifts(140 tons) of Molten metal

2007 – 2010, ArcelorMittal Skopje, Macedonia (hot rolling mill/cold rolling mill), factory for

production of steel, 1350 employees Manager for Health and Safety

Responsible for all occupation health, safety and hygiene issues within the organization,

Implementation of OHSAS18001

During Major shut down ( January – February 2010 modernization of Pre Painted Line and Hot

Dip Galvanized Line )beside all HSE issues for the project , responsible for inspection of

scaffolds and mobile platform used in the project

2006 – 2007 – Skopski Leguri dooel, Skopje, Macedonia - Manager for Health and Safety

2001 – 2005, Cold Mill – AD, Skopje, Macedonia,  Engineer in Occupational health and

safety, Assistant Manager

Part of project team for Optimization and automatic monitoring of the pickling process for cold

rolled low carbon steels in Cold Mill – AD Skopje regarding Occupational health and safety and

environmental protection issues

3