d20720 spreads - americanaugers.com pressure: 1,500 psi (103 bar) mud swivel: rear mounted, 5 ½...

Maxi-RigsHorizontal Directional Drills

an Astec company

DD-440DD-440TDD-625DD-1100RS

• PINION AND GEAR Rotary Drive• ADJUSTABLE TORQUE LIMITER for

Rotary and Makeup Force• ADJUSTABLE FORCE LIMITER for

Thrust and Pullback• INDEPENDENT CONTROLS AND

HYDRAULIC CIRCUITS for Thrust/Pullback/Torque and Auxillary Operation

• WIRELINE COMMUTATOR for Speedy Hookup of the Wireline Guidance Equipment

• VARIABLE Entry Angle• HYDRAULICALLY OPERATED Pipe

Supports• DEDICATED Pumps for Rotary and Thrust• WRENCH TRAVELS Full Length of the

Thrust Frame• ACCOMODATES Range II Drill Pipe• WIGGLE STEER™

• RUN-ON-ONE-TECHNOLOGY-SYSTEM (ROOTS) capable

• TRI-AXLE Trailer

an Astec company

(2) Caterpi l ler ® C-11Tier I I I D ieselEngines, 375 HP(292.2 kW) each,750 HP (584.4 kW)tota l

www.AmericanAugers.com

DD-440Horizontal Directional Drill

Microprocessor Control led

• 440,000 lbs . (200tonnes) MaximumThrust/Pul lback

• 60,000 f t . lbs .(81,350 Nm)Maximum RotaryTorque

MiMiMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMiMMMM crcrrcrrrrrrrrrrrrrrrrrrrrrcrrrrrrrrrrrrrrrrrrrrrrrrrrropoopopopopoopooooooooooo rororoororororoororoororororooroorororrooroorrrororroocececcecececcecceccccececcececeeceececceeceeeceeeeeeeeeeeeeeeeeeeesssssssssssssssssssssssssssssssssssssssssssssssssssorororooooooooororooooorororooorooororoooooooo CCCoCoCCCCooooCoCoCoooCoCooooCCoooooCCooCooooooooooooooooooooooooCooCoooC ntttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttrorrrrrrrororrrrorrrrrrorrrrrrrrrrrrrrr l ll llllllll lll lllll lllllllllllll llllllllllllll lllllllllllllll llllededdededededdedededededdddededededddddeddedededeeeededeeeeeeeeddedddededededeeeeeeeeeeeeeeeeeeeedeeeeeedeeeedddeeeeddedddddeeedddeddddeeddeedeeeddeeddeedddeeeeddeeeeedddeedddeedddeeedddeeeddddeeeddddeeddd

Trai ler Mounted

for easy mobi l i ty

The only Track Mounted Directional Drill that offers the highest range of fi eld-proven thrust/pullback power

The same power, torque and benefi ts of a DD-440 in a highly mobile track-mounted format. It’s your preference!







Supports• DEDICATED Pumps for Rotary and Thrust• WRENCH TRAVELS Full Length of

the Thrust Frame• ACCOMODATES Range II Drill Pipe• WIGGLE STEER™


an Astec company

onal ge of wer

of anted

n

usttttt




DD-440THorizontal Directional Drill

Track Mounted for opt imum jobsi te mobi l i ty

Cummins Tier I I I

D iesel Engine, 600

HP (441.3 kW)

Great for large diameter and long reach pipeline crossings or utility construction projects







Supports• DEDICATED Pumps for Rotary and Thrust• WRENCH TRAVELS Full Length of

the Thrust Frame• ACCOMODATES Range II Drill Pipe• WIGGLE STEER™


an Astec company




y

t

Maximum RotaryTorque

DD-625Horizontal Directional Drill

Cummins Tier I I I

D iesel Engine, 600

HP (441.3 kW)

Tr i-Axle Suspension-Mounted Thrust Frame

• 1 ,100,000 lbs . (500tonnes) MaximumThrust/Pul lback

• 100,000 f t . lbs .(136,000 Nm)Maximum Rotary Torque

Most Advanced Maxi-Rig in Its Class

• Rapid set up without a crane• Back the rig into place• Optional pipe handling• Noise deadening power packs

Versatile • Cost-Saving •Maximum Power

This brand new, time -saving drill allows contractors ease of mobility and versatility with maximum power of a 1,100,000 lb. rig!

an Astec company

• 1 ,100,000 lbs

stec company

(imumack

bs.)

e

s . (500

• Caterpi l ler ® C-18Tier I I I D ieselengines, 765 HP/uni t

• Microprocessor Contro l led Fuel Savings

• Improved Hydraul ic Hose Rout ing: Less Manifolds

• Best Hydraul ic Fi l ter ing in the Industry!

Self-Erect ing Rapposi t ions large eqquickly and easi ly


DD-1100RSHorizontal Directional Drill with Rapid Setup

Back-In Instead of Pul l- InThe American Augers Rapid Setupprocedure consists of a few simple steps!

1) Position the front and rear foot2) Position the rig at the jobsite3) Lower the arms to the rear foot4) Move the dolly5) Disconnect the tractor6) Raise the rig7) Insert locking pins at different angles to

complete the Rapid Setup

pid Setup quipment y!

MAXI-RIG HORIZONTALPERFORMANCE S

DD-440 DD-440T

Power Train

Engine: (2) Caterpillar C-11 Tier III DieselRating: 375 HP (292.2 kW) each

750 HP (584.4 kW) totalFuel Capacity: 300 US gal. (1136 L)Hydraulic Capacity: 275 US gal. (1041 L)Hydraulic Filter: High Pressure Filtration Return to 6 Micron

ABSBattery: (2) Deka 908 DMF 12 V, 1450 CCA

Carriage System: Rack & Pinion (2) Pinion Drive, Adj. Force Limiter

Max. Thrust/Pullback: 440,000 lbs. (200 Tonnes)Max. Carriage Speed: 95 ft. (29 m) / per minuteCarriage Motors: (2) Hyd. 160 cc, Radial Piston / Dual

DisplacementCarriage Brakes: (2) Spring Applied / Hydraulic ReleasePlanetary Gearbox: (2)

Rotary System: (3) Pinion & Gear Drive with Infinitely Variable Torque

Max. Rotary Torque: 60,000 ft. lbs. (80,000 Nm) @ 0-43 RPMMin. Rotary Torque: 25,500 ft. lbs. (34,700 Nm) @ 0-95 RPMMax. Rotary Speed: 95 RPMRotary Motor: (3) 160 cc, Axial Piston, Variable DisplacementRotary Brakes: (2) Spring Applied / Hydraulic ReleaseFluid Course: 4" (102 mm)Mud Flow Rate: Permits up to 1,000 US gal. (3,785 L) / per

minuteMax. Mud Pressure: 1,500 psi (103 bar)Mud Swivel: Rear Mounted, 5 ½ IFLH PinSlip Spindle: 6 " API-FH PinOther Features: Digital Tach., Adj. Torque Limiter,

Wiggle Steer®

Wrench/Clamp System: Triple Jaw Wrenches with 12" (305 mm) Sep.

Wrench Travel: Wrench has full length thrust frame travelMax. Breakout Torque: 154,000 ft. lbs. (209,400 Nm)Max. Makeup Torque: 101,700 ft. lbs. (138,312 Nm)Clamp/Grip Range: 2 ¾" - 10 ¾" (70-273 mm) ODWrench Assembly Motor: (2) Hydraulic LSHT, 12 CIRWrench Assembly Brake: (1) Spring Applied / Hydraulic ReleasePlanetary Gearbox: (2) SGLHydraulic Wrench Cylinder: (6) 8" Bore x 3" StrokeDrill Angle: 10°-18°Drill Pipe: Range II—34 ft. (10.4 m)Mounting: Thrust Frame Mounted to Tri-Axle Trailer with

Air-Ride Suspension and 5th Wheel Hitch

Engine: Cummins Tier III DieselRating: 600 HP (441.3 kW)Fuel Capacity: 160 US gal. (605 L)Hydraulic Capacity: 200 US gal. (757 L)Hydraulic Filter: High Pressure Filtration Retur


Carriage System: Rack & Pinion (2) Pinion DriLimiter

Max. Thrust/Pullback: 440,000 lbs. (200 TonneMax. Carriage Speed: 95 ft. (29 m) / per minuteCarriage Motors: (2) Hyd. 160 cc, Radial Pisto

DisplacementCarriage Brakes: (2) Spring Applied / HydrauliPlanetary Gearbox: (2)

Rotary System: (3) Pinion & Gear Drive with InTorque

Max. Rotary Torque: 60,000 ft. lbs. (80,000 NmMin. Rotary Torque: 40,635 ft. lbs. (56,198 NmMax. Rotary Speed: 95 RPMRotary Motor: (3) 160 cc, Axial Piston, VariablRotary Brakes: (2) Spring Applied / Hydraulic RFluid Course: 3" (76 mm)Mud Flow Rate: Permits up to 650 US gal. (2,4

minuteMax. Mud Pressure: 1,500 psi (103 bar)Mud Swivel: Rear Mounted, 5 ½ IFLH PinOther Features: Digital Tach., Adj. Torque Lim

Wiggle Steer®

Wrench/Clamp System: Triple Jaw Wrenches w(305 mm) Sep.

Wrench Travel: Wrench has full length thrust frMax. Breakout Torque: 154,000 ft. lbs. (209,40Max. Makeup Torque: 101,700 ft. lbs. (138,312Clamp/Grip Range: 2 ¾" - 10 ¾" (70-273 mm) Wrench Assembly Motor: (2) Hydraulic LSHT,Wrench Assembly Brake: (1) Spring Applied / H

ReleasePlanetary Gearbox: (2) SGLHydraulic Wrench Cylinder: (6) 8" Bore x 3" SDrill Angle: 10°-18°Drill Pipe: Range II—34 ft. (10.4 m)Travel System: Track Mounted under Carriage C

Assembly

Carr iageSystem

Rotary Dr ive

Dri l l Rig &Wrench

L DIRECTIONAL DRILLSSPECIFICATIONS

DD-625 DD-1100RS

rn to 6 Micron

ive, Adj. Force

es)en / Dual

ic Release

nfinitely Variable

m) @ 0-43 RPMm) @ 0-95 RPM

e DisplacementRelease

60 L) / per

iter,

with 12"

rame travel00 Nm)2 Nm)OD

, 12 CIRHydraulic

Stroke

Crawler

Engine: Cummins Tier III DieselRating: 600 HP (441.3 kW)Fuel Capacity: 650 US gal. (2,460 L)Hydraulic Capacity: 107 US gal. (405 L)Hydraulic Filter: High Pressure Filtration Return to 6 Micron



Max. Thrust/Pullback: 625,000 lbs. (283 Tonnes)Max. Carriage Speed: 120 ft. (36 m) / per minuteCarriage Motors: (4) Radial Piston / Dual DisplacementCarriage Brakes: (2) Spring Applied / Hydraulic ReleasePlanetary Gearbox: (4)


Max. Rotary Torque: 80,000 ft. lbs. (108,800 Nm) @ 0-33 RPMMin. Rotary Torque: 23,500 ft. lbs. (31,800 Nm) @ 0-90 RPMMax. Rotary Speed: 90 RPMRotary Motor: (4) 160 cc, Axial Piston, Variable DisplacementRotary Brakes: (2) Spring Applied / Hydraulic ReleaseFluid Course: 3" (76 mm)Mud Flow Rate: Permits up to 650 US gal. (2,460 L) / per

minuteMax. Mud Pressure: 1,500 psi (103 bar)Mud Swivel: Rear Mounted, 5 ½ IFLH Down Hole x 6Other Features: Digital Tach., Adj. Torque Limiter,

Wiggle Steer®


Wrench Travel: Wrench has full length thrust frame travelMax. Breakout Torque: 212,000 ft. lbs. (288,000 Nm)Max. Makeup Torque: 140,000 ft. lbs. (190,000 Nm)Clamp/Grip Range: 3 ½" - 10 ½" (89-267 mm) ODWrench Assembly Motor: (1) Hydraulic LSHT, 12.5 CIRWrench Assembly Brake: (1) Spring Applied / Hydraulic

ReleaseHydraulic Wrench Cylinder: (6) 8" Bore x 3" StrokeDrill Angle: 10°-18°Drill Pipe: Range II—34 ft. (10.4 m)Mounting: Thrust Frame mounted to Tri-Axle Suspension Base

One Power PackEngine: Caterpillar C-18 Tier III DieselRating: 765 HP (570 kW)Fuel Capacity: 650 US gal. (2,460 L)Hydraulic Capacity: 220 US gal. (833 L)Hydraulic Filter: High Pressure Filtration Return to 6 Micron



Max. Thrust/Pullback: 1,100,000 lbs. (500 Tonnes)Max. Carriage Speed: 101 ft. (30.7 m) / per minuteCarriage Motors: (6) Radial Piston / Dual DisplacementCarriage Brakes: (6) Spring Applied / Hydraulic ReleasePlanetary Gearbox: (6)


Max. Rotary Torque: 100,000 ft. lbs. (136,000 Nm) @ 0-37 RPM

Min. Rotary Torque: 40,000 ft. lbs. (54,000 Nm) @ 0-85 RPMMax. Rotary Speed: 85 RPMRotary Motor: (4) 160 cc, Axial Piston, Variable DisplacementRotary Brakes: (4) Spring Applied / Hydraulic ReleaseFluid Course: 4" (102 mm) for increased down hole hydraulic

powerMud Flow Rate: Permits up to 1,000 US gal. (3,785 L) / per

minuteMax. Mud Pressure: 1,500 psi (103 bar)Hydraulic Pump: (2) Piston Pump, Closed LoopSlip Spindle: 8 " PinOther Features: Digital Tach., Adj. Torque Limiter,

Wiggle Steer®


Wrench Travel: Wrench has full length thrust frame travelMax. Breakout Torque: 230,000 ft. lbs. (312,000 Nm)Max. Makeup Torque: 100,183 ft. lbs. (138,252 Nm)Clamp/Grip Range: 3 ½" - 10 ½" (89-267 mm) ODWrench Assembly Motor: (2) Hydraulic LSHT, 12.5 CIRWrench Assembly Brake: (1) Spring Applied / Hydraulic

ReleaseClamp Cylinder: 8" Bore x 3" Stroke for 226,000 lbs. of

Clamping ForceHydraulic Breakout / Makeup Cylinder: 6" Bore x 16" StrokeWrench Separation Cylinder: 4" Bore x 12" StrokePivoting Hook Pads: Ability to remove the wrench w/o tools or

boltsDrill Angle: 10°-18°Drill Pipe: Range II—34 ft. (10.4 m)Mounting: Thrust Frame mounted to Tri-Axle Suspension Base

* Note: All product performance specifi cations, components, weights, dimensions and other related information is subject to change without notice from the manufacturer.

MAXI-RIG HORIZONTALTRANSPORT INFOR

DD-440 DD-440T

Dimensions

Length: 51 ft. 5 in. (15.7 m)Width: 8 ft. 2 in. (2.5 m)Height: 13 ft. 6 in. (4.1 m)

Total Weight: 93,000 lbs. (42,185 kg)Total Weight w/o Wrenches: 86,000 lbs. (39,009 kg)Wrenches are removable for lighter transport

Run-On-One Technology System Free Standing Operator’s Console with Pressure GaugesEs!Lok Entry / Exit Side Lockout, 1 mile (1.6 km) range Safety System package with ZapAlert

Wiggle Steer® Operator’s Manual and other Unit Support Materials

Length: 49 ft. (14.93 m)Width: 8 ft. 2 in. (2.5 m)Height: 11 ft. 8 in. (3.6 m)

Total Weight: 95,400 lbs. (43,273 kg)Total Weight w/o Wrenches: 87,600 lbs. (39,785 kg)Wrenches are removable for lighter transport

Weights

Included withBase Unit

L DIRECTIONAL DRILLSRMATION & EXTRAS

DD-625 DD-1100RSLength: 55 ft. (16.8 m)Width: 8 ft. 6 in. (2.59 m)Height: Working: 17 ft. (5.18 m) Transport: 11 ft. 6 in. (3.35 m)

Total Weight: 93,800 lbs. (42,547 kg)Total Weight w/o Wrenches: 86,000 lbs. (39,009 kg)Wrenches are removable for lighter transportSingle Power Pack Weight: 33,000 lbs. (14,969 kg)

Free Standing Operator’s Console with Pressure Gauges Es!Lok Entry / Exit Side Lockout, 1 mile (1.6 km) rangeSafety System package with ZapAlert Wiggle Steer® Operator’s Manual and other Unit Support Materials

Transport Length: 64 ft. 10 in. (19.5 m)Transport Width: 8 ft. 2 in. (2.5 m)Height: Working: 19 ft. (5.79m) Transport: 11 ft. 10 in. (3.04 m)Single Power Pack Length: 19 ft. 8 in. (6.03 m)Single Power Pack Width: 8 ft. (2.43 m)Single Power Pack Height: 9 ft. 5 in. (2.9 m)

Estimated Transport Total Weight: 113,000 lbs. (51,256 kg)Estimated Transport Total Weight w/o Wrenches: 105,300 lbs. (47,763 kg)Wrenches are removable for lighter transportSingle Power Pack Weight: 35,500 lbs. (16,103 kg)


MAXI-RIG HORIZONTAL

PREMIUM OPTIONS

ISO-Style Driller’s Cabinfor Rugged, Construction-Grade Reliability! This new descorners is the world standard con guration for of oading 12-gauge corrugated siding with thermo pane windows. Tinterior boasts an ergonomically con gured design for optand new 6-way adjustable tension chair with seat and sideClimate controlled environment, dual joysticks and abundsurface. Can be ordered with 50 Hz option. 8' x 12' or 8' xavailable.

ISO-Style Trailer (51' x 96" for both Power Packs)

Sound deadening enclosure for your power units. Mremovable panels that contain 2" of acoustical absokeeping dBs to 80. There are three lockable double access.

Secondary Power Pack includes ROOTS - Run on One Technology SystemDrill can operate on one or both units. Allows you to do maintenance on one unit without eany down time.

Certi ed Pullback Test a guarantee of exactly what YOUR machine can pull.

Pipe Loader improves safety with less crew around the rig. Features include:connected to the thrust frame with pins for easy attachment and removal, can of drill pipe and has processor controlled extension cylinders for accurate andpositioning.

L DIRECTIONAL DRILLS

DD-440 DD-440T DD-625 DD-1100RS

sign with ISOduring export.

The cabintimum visibilitye pod controls.dant workx 20' sizes

Made up ofrbing materialdoors for easy

experiencing

: stages 4 rods, handle different sizes

d adjustable rod

Environmental CommitmentAmerican Augers is committed to manufacturing equipment that helps to preserve the sanctity of the global environment, and has done so by reducing noise and/or emissions outputs, and emphasizing the fact that our trenchless technology equipment requires little or no open cut-ting, which has very minimal impacts on natural surfaces, features, or habitats.

0512


The American Augers line of underground construction equipment is second-to-none. • Auger Boring Machines • Maxi-Rig & Mid-Size Directional Drills • Oil & Gas Drilling Rigs • Mud Pump & Cleaning Systems • Product Tooling & Accessories

American Augers products are manufactured at the company’s 241,000 square-foot facility in West Salem, Ohio, in the heart of Amish country between Columbus and Cleveland.

Since the founding of American Augers in 1970, there has never been a change in the company’s core value: having products developed by a can-do work force that focuses on mechanical, technological and customer-based design improvements. Our goal is to always exceed customer expectations by providing products that are not a cost of doing business, but an Investment in Success.

Did You Know? American Augers was the fi rst HDD manufacturer to eliminate chain and utilize a rack and pinion carriage design which is now the industry standard. Our rack and pinion drive provides smoother carriage movement, more precise operating control, long system life and no complicated parts.

American Augers machines are supported through a dedicated parts and technical ser-vice department. We are here to help whenever you need us 24 hours a day, 7 days a week, emergency or not.


d20720 spreads - americanaugers.com pressure: 1,500 psi (103 bar) mud swivel: rear mounted, 5 ½...

Documents