daikin uk training 2013/14daikintraining.co.uk/wp-content/uploads/2013/03/a4trainingbrochure... ·...
TRANSCRIPT
Open weekdays 09.00 – 17.30
T: 0845 641 9260E: [email protected]: 0845 641 9075www.daikin.co.uk
Daikin UK training 2013/14 1
Introduction to Daikin UK training 2
Courses now available around the UK 3
AC, refrigeration and controls related courses available at Daikin UK centres 4 - 11
Heating product courses available at Daikin UK centres 12 - 15
Schedule – course dates and regional venues 16 - 17
Daikin UK working in conjunction with The National Skills Academy 18
Daikin UK and EAL industry accredited heating courses 19 - 20
How to book a course 21
Industry related courses available at regional technical colleges 22 - 23
Regional technical college contact details 24
Contents
Daikin UK training 2013/142
Designed to raise standards, set industry benchmarks and help you develop both product and service expertise. You’ll receive the highest quality training and hands on instruction at our industry leading technology centres.
Latest range of products Courses are available to attend at Bristol, Woking, Birmingham,
Manchester and Glasgow. The Daikin UK regional training centres
are fully equipped with the latest range of products, installed and
fully operational for maximum hands on experience.
All training is given by highly skilled engineers who will be
able to provide you with extensive in depth knowledge of our
equipment. If you have any specific training requests outside of
the scheduled programme, please contact us.
A general overview of the style of course content offered:
1. Product selection and application techniques
2. Installation and commissioning requirements
3. Daikin centralised control systems application
and commissioning
4. Advanced service and fault finding for field engineers
Daikin UK’s customised product training
Daikin UK training centres
BristolDaikin Airconditioning UK Limited
Maple House, Brotherswood Court,
Great Park Road, Almondsbury,
Bristol BS32 4QW
WokingDaikin Airconditioning UK Limited
1 River Court, Albert Drive, Woking,
Surrey GU21 5RP
BirminghamDaikin Airconditioning UK Limited
Unit 8, Holly Park, Spitfire Road,
Birmingham, West Midlands B24 9PB
ManchesterDaikin Airconditioning UK Limited
17b Cobra Court, Blackmore Road,
Manchester M32 0QY
GlasgowDaikin Airconditioning UK Limited
Unit 2, Glasgow Airport Business Park,
Marchburn Drive, Paisley PA3 2SJ
1
3
4
5
2
Daikin UK training 2013/14 3
With Daikin UK’s support, specialist further education colleges around the UK are offering high-class training with state-of-the-art equipment, helping raise industry standards, for the highly skilled engineers who are in increasing demand.
Growth togetherDaikin UK is committed to ensuring that the next generation
of heating, air conditioning and ventilation engineers have the
specialist skills and practical experience required to install and
maintain the innovative new technologies that can improve
the performance of HVAC-R systems while reducing their
environmental impact.
In turn, this will help employers who invest in apprenticeships and
ongoing training of their engineers to capitalise on the growing
business opportunities for companies with proven expertise in
delivering highly energy-efficient climate control systems.
Why invest in training on the latest systems:
> The rapidly growing market in heat pumps and heat recovery
systems offers major new business opportunities
> New technologies require wider knowledge of heating,
refrigeration and safe handling techniques
> Tighter regulations demand certified skills and renewal of
existing certifications
> Specialist training programmes provide invaluable hands-on
experience in the very latest technologies
College collaborationsSo far, this on going initiative has created the following
collaborations with Daikin UK:
City of Bath College
College of North West London
Dudley College
West Suffolk College
PGL Training
Each college offers carefully
prepared training courses.
For more information, please
contact your nearest college
directly (see page 24).
Courses now available around the UK
1
2
3
4
5
Daikin UK training 2013/144
Sky Air Systems Pair, twin, triple and double twin systemsInstallation, commissioning and service Refrigerant: R410A
Reference: DUK-SE2
Objectives> Product introduction > Install and commissioning requirements > Service and maintenance
Who is it forInstallation, commissioning and service engineers with refrigeration and safe handling knowledge
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction> R22 legislation> Installation of field piping> Installation of field wiring> Optional Pcbs and accessories> Indoor and outdoor unit functions> Remote control options> Thermostatic control> Internal piping schematics > Indoor and outdoor Pcb explanation> Compressors> Component checks> Advanced system functions> Malfunction codes and diagnostics> Questions and answers
Price
£150 (ex vat) Including course syllabus and service manuals
Split and Multi Split Systems Installation, commissioning and service
Refrigerant: R410A
Reference: DUK-SE1
Objectives> Product introduction > Install and commissioning requirements > Service and maintenance
Who is it forInstallation, commissioning and service engineers with refrigeration and safe handling knowledge
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsWoking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction> R22 legislation> Installation of field piping> Installation of field wiring> Optional Pcbs and accessories> Indoor and outdoor unit functions> Remote control options> Thermostatic control> Internal piping schematics > Indoor and outdoor Pcb explanation> Compressors> Component checks> Advanced system functions> Malfunction codes and diagnostics> Questions and answers
Price
£150 (ex vat) Including course syllabus and service manuals
Daikin UK training 2013/14 5
VRV®III Air Cooled Heat Recovery and Mini VRV® Heat Pump Systems Installation and commissioning Refrigerant: R410A
Reference: DUK-SE5
Objectives> Product introduction> Install and commissioning requirements
Who is it forInstall and commissioning engineers with refrigeration and safe handling knowledge
Duration2 days. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow.Also available at West Suffolk College
TrainerDaikin UK technical engineer
ProgrammeDay 1> Product introduction> R22 legislation> System selection> Installation of field piping> Installation of condensate drainage> Installation of field wiring> System control
Day 2> Commissioning requirements> Optional accessories> System change over options> Use of the remote controller> Service codes and settings> Questions and answers
Price
£300 (ex vat) Including course syllabus and service manuals
VRV®III Heat Recovery and VRV®IV Heat Pump Systems Selection and application including VRVIII®-Q R22 replacement system Refrigerant: R410A
Reference: DUK-SE3
Objectives> Product introduction > Selection and application for VRV® equipment> Basic install requirements
Who is it forInternal, external, sales, design, selection and application engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction> R22 legislation> System benefits> Connectable combinations> Selection procedures> Use of the VRV® Express programme> Field pipe work application> Field wiring requirements> System control options> BMS Lon and Bacnet interfaces> Optional Pcbs and accessories> Cooling and heating system change over > Daikin I-Touch Manager system> Questions and answers
Price
£75 (ex vat) Including course syllabus and technical data manuals
Daikin UK training 2013/146
‘C’ Series Intelligent Touch Controller Reference: DUK-SE7
Objectives> Install and commissioning of the I-Touch Controller> Introduction to the Bacnet and Lon BMS Interface devices
Who is it forControls and commissioning engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Features of the I-Touch Controller > Controller terminations > Possible usage combinations> Field wiring requirements> Detailed functional explanation> Configuring the programs> System control options> Hardware components> Software> Commissioning optional software> Use of the pre set tool> BMS options> Lon and Bacnet interfaces> Questions and answers
Price
£150 (ex vat) Including course syllabus and technical data manuals
VRV®III Advanced service and fault finding (DUK-SE5 must have been completed prior to attendance) Refrigerant: R410A
Reference: DUK-SE6
Objectives> To cover advanced VRV® system operational functions,
with service and fault finding techniques
Who is it forCommissioning and service engineers with refrigeration and safe handling knowledge
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> In depth look into the:
– outdoor unit – BS Box – indoor unit
> Refrigerant flow explanations> System capacity steps and control of starting sequences> Test run operations and refrigerant containment check> Indoor and outdoor field settings> System component checks (indoor)> System component checks (outdoor)> Testing of inverter circuit> Use of inverter analyser> Additional service information > Questions and answers
Price
£150 (ex vat) Including course syllabus (service manuals obtained from previous SE5 attendance)
Daikin UK training 2013/14 7
Service Checker(DUK-SE6 must have been completed prior to attendance)
Refrigerant: R22, R407C & R410A
Reference: DUK-SE12
Objectives> Product introduction > Install set up and commissioning requirements
Who is it forCommissioning and service engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction> Purpose of the service checker> Equipment requirements, software and hardware> Loading of the checker software> Checker and system connection methods> How to use the checker> Playing back of previously recorded data> Transferring of data> Transferring data to CSV format> Optional accessories> Key operational and display items to look for> Practical exercises
Price
£150 (ex vat) Including course syllabus and technical data manuals
The Daikin Service Checker hardware and portable PC is required to be supplied by each attendee to this course, further information regarding the Service Checker Interface hardware price and availability can be obtained from your
regional sales office.
Daikin CVP and Zeas (R410A) Installation and commissioning
Refrigerant: R410A
Reference: DUK-SE13
Objectives> Product introduction> Installation requirements> Commissioning requirements
Who is it forInstallation and commissioning engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsWoking and Manchester
TrainerDaikin UK technical engineer
Programme> Product introduction> Basic system overview> Outdoor unit positioning> Installation of field piping> Installation of additional components> Installation of condensate drainage > Installation of field wiring> Installation of accessories> Commissioning preparation> Field settings> Questions and answers
Price
£150 (ex vat) Including course syllabus and service manuals
Daikin UK training 2013/148
VRVIII®-Q R22 Replacement SystemInstallation and commissioning(DUK-SE5 must have been completed within the previous 12 months in order to attend) Refrigerant: R410A
Reference: DUK-SE19
Objectives> Product introduction> Install and commissioning requirements
Who is it forInstall and commissioning engineers with refrigeration and safe handling knowledge
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction and selection> R22 legislation> Installation of field piping> Pipe sizing and unit selection> Installation of field wiring> Commissioning requirements> System operation> Component location and operation> Internal pipework diagrams and refrigerant flow> Applicable field settings
Price
£150 (ex vat) Including course syllabus and technical data manuals
EWA(Y)Q... DA Series (Picasso Control Platform) Multi Scroll Air Cooled Packaged ChillersInstallation, commissioning and service Refrigerant: R410A
Reference: DUK-SE24
Objectives> Product introduction > Install, commissioning, operational functions and
service for this chiller range
Who is it forCommissioning and service engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product range and specifications> Factory fitted components and options> Operational ranges> Installation requirements> Internal refrigerant piping> Field connections and internal wiring> Control options> Pre-start up checks> System set up and adjustable parameters
available to access> Unit and circuit system safety devices> Faults and fault diagnosis> Maintenance requirements> Questions and answers
Price
£150 (ex vat) Including course syllabus and service manuals
Please be aware although no pre confirmed course dates are advertised, these courses will run dependant upon regional request.
Daikin UK training 2013/14 9
EWA(Y)Q…BA SeriesDaikin Inverter ChillerInstallation and commissioning Refrigerant: R410A
Reference: DUK-SE25
Objectives> Product introduction> Installation requirements> Commissioning requirements> Service and maintenance
Who is it forInstallation, commissioning and service engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction> Basic system overview> Internal piping layouts> Installation procedures> System operation> Use of remote controller interface> Commissioning procedures> Recommended maintenance> Basic fault finding> Questions and answers
Price
£150 (ex vat) Including course syllabus and technical data manuals
Rooftop Packaged UnitDaikin UATYQ-MB-MC, Daikin ECONO250-700AY1Installation, commissioning and service Refrigerant: R410A
Reference: DUK-SE26
Objectives> Product introduction> Installation requirements> Commissioning procedures and troubleshooting
Who is it forInstallation and commissioning engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction> System and control> Remote controller operation guide> Control logic> Commissioning and troubleshooting> Scroll compressor> Options, economiser installation, set up and operation
Price
£150 (ex vat) Including course syllabus and technical data manuals
Daikin UK training 2013/1410
Daikin CVP (R407C) Service and maintenance
Refrigerant: R407C
Reference: DUK-SE27
Objectives> Service requirements> Maintenance requirements> Fault finding
Who is it forService and maintenance engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsWoking
TrainerDaikin UK technical engineer
Programme> Service requirements and procedures> Maintenance requirements and procedures> Unit breakdown> Fault codes and diagnosis> Component identification> Component testing> Incorrect operation and rectification techniques> Questions and answers
Price
£150 (ex vat) Including course syllabus and service manuals
Please be aware although no pre confirmed course dates are advertised, these courses will run dependant upon regional request.
NEW VRV®IV Air Cooled Heat PumpInstallation and commissioning(VRV®III DUK-SE5 course completion would be an advantage prior to attendance) Refrigerant: R410A
Reference: DUK-SE29
Objectives> Product introduction > Install and commissioning requirements
Who is it forInstall and commissioning engineers with refrigeration and safe handling knowledge
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow.Also available at West Suffolk College
TrainerDaikin UK technical engineer
Programme> Product introduction> R22 Legislation> System selection> System positioning> Installation of field pipework> Installation of field wiring> Condensate drainage> System control options> Pre commissioning requirements> System start up> Commissioning requirements> Heat/cool change over options> Optional accessories> Outdoor unit field settings> Indoor unit field settings> Use of remote controller> Questions and answers
Price
£150 (ex vat) Including course syllabus and service manuals
Daikin UK training 2013/14 11
NEW EWA(Y)Q…E&F Series (Siemens Control Platform)Multi Scroll Air Cooled Packaged ChillersInstallation, commissioning and service Refrigerant: R410A
Reference: DUK-SE30
Objectives> Product introduction > Install commissioning, operational functions and service
requirements for this chiller range
Who is it forCommissioning and service engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product range and specifications > Factory fitted components and options > Operational ranges> Installation requirements> Internal refrigerant piping> Field connections and internal wiring > Controller> Software menu> System control> Faults and fault diagnosis> Maintenance requirements> Questions and answers
Price
£150 (ex vat) Including course syllabus and technical data manuals
NEW Intelligent Touch Manager Reference: DUK-SE31
Objectives> Install and commissioning of the I-Touch Manager> Product introduction
Who is it forControls and commissioning engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Features of the I-Touch Manager> Controller terminations> Possible usage combinations> Field wiring requirements> Detailed functional explanation> Configuring the programs> System control options> Hardware components> Software> Operation of optional software> Use of the pre set tool> BMS options> Lon and Bacnet interfaces> Questions and answers
Price
£150 (ex vat) Including course syllabus and technical data manuals
Daikin UK training 2013/1412
Daikin Altherma: Low Temperature Split SystemsInstallation and commissioning including Monobloc
Refrigerant: R410A
Reference: DUK-SE11Heating Products
Objectives> Product introduction > Installation requirements > Commissioning procedures
Who is it forInstallation and commissioning engineers
Duration2 days. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsManchester, Glasgow. Also available at West Suffolk College
TrainerDaikin UK technical engineer, or regional college lecturer
ProgrammeDay 1> Product introduction> R22 legislation> Options and technical specifications> Daikin Altherma selection software> Air-water heat pump> Mechanical installation> Electrical installation
Day 2> System water and refrigerant flows> Pre-start up checks and field settings> Use of the remote control interface > Advanced functional overview> Recommended service and maintenance> Fault finding > Questions and answers
Price
£300 (ex vat) Including course syllabus and service manuals
Daikin Altherma: Low and High Temperature Split SystemsSelection and application including Monobloc Refrigerant: R410A & R134a
Reference: DUK-SE15Heating Products
Objectives> Product introduction> Selection and application of the Daikin Altherma range> Basic install requirements
Who is it forInternal, external sales, design, selection and application engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow.Also available at West Suffolk College and PGL Training
TrainerDaikin UK technical engineer
Programme> Product introduction and system benefits> Renewable energy and market drivers> Air-water heat pump> Overview of MCS design standard> Introduction to heat loss calculations> Selection procedure> Daikin Altherma selection software> System operational parameters> Selection of hot water cylinder> System control options> Field pipework application, refrigerant> Field pipework application, water> Field wiring requirements> Optional accessories including solar connection > Questions and answers
Price£75 (ex vat) Including course syllabus and technical data manuals
Please bring a portable PC to enable hands on tuition of the Altherma selection software.
Daikin UK training 2013/14 13
Daikin Altherma: Low and High Temperature Systems Advanced service and fault finding including Monobloc (DUK-SE11 and/or DUK-SE18 must have been completed prior to attendance) Refrigerant: R410A & R134a
Reference: DUK-SE17Heating Products
Objectives> To cover Daikin Altherma system operational functions,
with advanced service and fault finding techniques
Who is it forService and maintenance engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Manchester, Glasgow.Also available at West Suffolk College
TrainerDaikin UK technical engineer
Programme> Covering various product ranges> Inside out of the Hydrobox> Inside out of the condensing unit> Inside out the hot water cylinder> Solar connections and control > Internal pipework. Ref and water> Internal wiring detail> Voltages to be expected > Pressures to be expected> Temperatures to be expected> Advanced operational functions> Operational components> Correct and adverse effects of incorrect field settings> Questions and answers
Price
£150 (ex vat) Including course syllabus (service manuals obtained from previous DUK-SE11 and/or DUK-SE18 attendance)
Daikin Altherma: High Temperature Split SystemsInstallation and commissioning
Refrigerant: R410A & R134a
Reference: DUK-SE18Heating Products
Objectives> Product introduction> Installation requirements> Commissioning procedures
Who is it forInstallation and commissioning engineers
Duration2 days. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Manchester, Glasgow.Also available at West Suffolk College, Dudley College and PGL Training
TrainerDaikin UK technical engineer, or regional college lecturer
ProgrammeDay 1> Product introduction> R22 legislation> Options and technical specifications> Daikin Altherma selection software> Air-water heat pump> Mechanical installation> Electrical installation
Day 2> System water and refrigerant flows> Pre-start up checks and field settings> Use of the remote control interface > Advanced functional overview> Recommended service and maintenance> Fault finding > Questions and answers
Price
£300 (ex vat) Including course syllabus and technical data manuals
Daikin UK training 2013/1414
Daikin Altherma: Flex TypeInstallation and commissioning(Both the DUK-SE5 and DUK-SE18 must have been completed prior to attendance)
Refrigerant: R410A
Reference: DUK-SE20Heating Products
Objectives> Product introduction> Installation requirements> Commissioning procedures
Who is it forInstallation and commissioning engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> R22 legislation > Product specifications > Billing systems – field supplied> Capacity index, indoor and outdoor> Installation examples> Main system components> Indoor unit and hot water cylinder> Positioning of the outdoor unit> Refrigerant pipework installation> Pressure test, evacuation and charging> Electrical installation > Install, commission and test run> System operational functions> Service codes and programming > General use of the remote controller> Setting the schedule timer> Recommended maintenance
Price
£150 (ex vat) Including course syllabus and technical data manuals
Daikin: Solar Thermal Pressurised and DrainbackProduct familiarisation
Reference: DUK-SE22Heating Products
Objectives> Product introduction> Introduction to solar thermal energy> Installation requirements
Who is it forInstallation and commissioning engineers
Duration1 day. Lunch included. Morning 09.30-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Introduction to solar thermal energy> Overview of the product range> Selection and sizing procedures> Solar panel fixing systems> Solar accessories> Integration of Daikin Altherma and Solar Thermal > Integration of Daikin Solar Thermal and
Rotex Gas Compact Unit> Basic installation overview> Questions and answers
Price
£75 (ex vat) Including course syllabus and technical data manuals
Daikin UK training 2013/14 15
Daikin Altherma: Low Temperature Monobloc SystemsInstallation and commissioning Refrigerant: R410A
Reference: DUK-SE23Heating Products
Objectives> Product introduction> Installation requirements> Commissioning procedures
Who is it forInstallation and commissioning engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction> Options and technical specifications > Daikin Altherma selection software > Air-water heat pump> Mechanical installation > Electrical installation > System flow rates and volumes> Use of remote controller interface> Advanced functional overview> Recommended maintenance> Basic fault finding> Questions and answers
Price
£150 (ex vat) Including course syllabus and technical data manuals
Daikin Altherma: Low Temperature Split SystemsRefresher training course (ERLQ-C)Installation and commissioning(DUK-SE11 must have been completed previously) Refrigerant: R410A
Reference: DUK-SE28Heating Products
Objectives> Product introduction> Installation requirements> Commissioning procedures
Who is it forInstallation and commissioning engineers
Duration1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30
Available locationsBristol, Woking, Birmingham, Manchester, Glasgow
TrainerDaikin UK technical engineer
Programme> Product introduction> Options and technical specifications> Daikin Altherma selection software> Overview of MCS changes> Mechanical installation> Electrical installation> System water and refrigerant flows> Pre-start up checks and field settings> Use of remote controller interface> Advanced functional overview> Recommended service and maintenance> Fault finding> Questions and answers
Price
£75 (ex vat) Including course syllabus and service manuals
Daikin UK training 2013/1416
13 =
CVP
And
Zea
s In
stal
latio
n15
= A
lther
ma
Sele
ctio
n17
= A
lther
ma
Adv
ance
d Se
rvic
e18
= A
lther
ma
HT
Inst
alla
tion
19
= V
RV®I
II-Q
Inst
alla
tion
20 =
Alth
erm
a Fl
ex In
stal
latio
n22
= S
olar
Intr
oduc
tion
23 =
Alth
erm
a M
onob
loc
Inst
alla
tion
1 =
Spl
it &
Mul
ti2
= S
ky A
ir3
= V
RV®I
II an
d VR
V®IV
Sel
ectio
n an
d A
pplic
atio
n5
= V
RV®I
II A
ir Co
oled
, Hea
t Rec
over
y, In
stal
latio
n an
d Co
mm
issi
onin
g6
= V
RV®I
II A
dvan
ces
Serv
ice
and
Faul
t Fin
ding
7 =
‘C’ S
erie
s In
telli
gent
Tou
ch C
ontr
olle
r11
= A
lther
ma
LT In
stal
latio
n12
= S
ervi
ce C
heck
er
24 =
Dai
kin
Mul
ti Sc
roll
Chi
ller (
DA
Ser
ies)
25 =
Dai
kin
Inve
rter
Chi
ller (
BA S
erie
s)26
= R
oof T
op P
acka
ge U
nits
27 =
CVP
Ser
vice
and
Mai
nten
ance
28 =
Alth
erm
a LT
‘C’ S
erie
s Re
fresh
er
29 =
VRV
®IV
Air
Cool
ed, H
eat P
ump,
Inst
alla
tion
and
Com
mis
sion
ing
30 =
Dai
kin
Mul
ti Sc
roll
Chi
ller (
E&F
Serie
s)31
= In
telli
gent
Tou
ch M
anag
er
Dai
kin
UK
Regi
onal
Tra
inin
g Ce
ntre
– 1
Day
cou
rse
Dai
kin
UK
Regi
onal
Tra
inin
g Ce
ntre
– 2
Day
cou
rse
Dai
kin
UK
affilia
ted
Regi
onal
Col
lege
– 1
Day
cou
rse
Dai
kin
UK
affilia
ted
Regi
onal
Col
lege
– 2
Day
cou
rse
Date
Apr
il 20
13M
ay 2
013
June
201
3Ju
ly 2
013
Aug
ust 2
013
Sept
embe
r 201
3Date
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
1Ba
nk H
olid
ay5
XX5
20XX
18XX
XXXX
XXXX
61
2XX
5XX
XXXX
XXXX
XXXX
XXXX
5XX
5XX
1118
XXXX
XXXX
XX1
23
2
3XX
5XX
XXXX
XXXX
XXXX
XXXX
XX24
XXXX
116
XXXX
XXXX
51
1518
211
3
4XX
XXXX
XXXX
XXXX
XXXX
XXXX
518
1211
4
5XX
XXXX
XXXX
XXXX
XXXX
XXXX
185
320
315
6Ba
nk H
olid
ayXX
XXXX
1829
XXXX
XXXX
XXXX
1526
6
729
XXXX
XXXX
XXXX
XXXX
XXXX
XX23
177
818
XXXX
29XX
XXXX
XX18
XXXX
3128
188
97
XXXX
XXXX
XXXX
XX18
XXXX
118
299
10XX
XXXX
XXXX
XXXX
XXXX
XXXX
XX19
118
XXXX
XXXX
XXXX
1512
329
3110
111
XXXX
XXXX
XXXX
XXXX
XXXX
XX18
XX15
XX5
XXXX
XXXX
XX6
155
2518
11
12XX
XXXX
XX12
XXXX
XXXX
XXXX
XX18
XXXX
75
XXXX
XXXX
XX12
522
1718
12
136
1XX
2011
6XX
XXXX
XXXX
XX13
13
1420
711
XX6
XXXX
XXXX
XXXX
1XX
XX11
7XX
XXXX
XXXX
XX14
1512
XX2
115
11XX
XXXX
XXXX
XX30
15
1612
1XX
XXXX
XXXX
XXXX
XXXX
13XX
65
113
11XX
XX18
XX12
716
175
XX15
XX5
XXXX
XXXX
XXXX
295
20XX
XXXX
11XX
XX18
XX31
511
1529
1817
185
XXXX
35
18XX
XXXX
XXXX
218
526
115
311
1818
19XX
XX7
XXXX
18XX
XXXX
XXXX
511
1815
315
2611
19
203
511
1812
2020
21XX
2218
XX18
5XX
XXXX
XXXX
3118
21
2212
1515
1823
185
XXXX
XXXX
XX31
2022
236
XXXX
11XX
XXXX
XXXX
XXXX
1113
XXXX
XX6
XXXX
XXXX
XX6
2211
2923
24XX
23XX
115
11XX
XX11
XXXX
3XX
523
XX15
XXXX
XXXX
XX6
302
2011
235
24
2528
XXXX
XX5
1111
XX11
XXXX
3115
2923
1718
285
25
2618
292
XXXX
XX11
XXXX
XXXX
523
31Ba
nk H
olid
ay18
624
26
27Ba
nk H
olid
ay5
2528
627
2817
XXXX
6XX
XXXX
11XX
XXXX
718
XXXX
XXXX
XXXX
XXXX
XXXX
28
297
246
2XX
XX11
XX11
XXXX
XX1
18XX
11XX
XXXX
XXXX
XX11
XX29
307
XX6
XXXX
XXXX
XXXX
XXXX
23XX
XXXX
XX2
XXXX
XXXX
XX5
XXXX
11XX
XXXX
XXXX
XX11
XX6
30
31XX
31XX
XX1
XXXX
XXXX
XXXX
531
Daikin UK training 2013/14 17
To b
ook
a pl
ace,
ple
ase
visi
t ww
w.d
aiki
ntra
inin
g.co
.uk
Plea
se n
ote:
pla
ces
can
only
be
book
ed v
ia th
e w
eb s
ite b
ooki
ng s
yste
m.
Dai
kin
UK
Regi
onal
Tra
inin
g Ce
ntre
– 1
Day
cou
rse
Dai
kin
UK
Regi
onal
Tra
inin
g Ce
ntre
– 2
Day
cou
rse
Dai
kin
UK
affilia
ted
Regi
onal
Col
lege
– 1
Day
cou
rse
Dai
kin
UK
affilia
ted
Regi
onal
Col
lege
– 2
Day
cou
rse
Date
Oct
ober
201
3N
ovem
ber 2
013
Dec
embe
r 201
3Ja
nuar
y 20
14Fe
brua
ry 2
014
Mar
ch 2
014
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
Woking (room 1)
Woking (room 2)
Birmingham
Bristol
Manchester
Glasgow
Col NW London
City of Bath Col
Dudley Col
PGL Training
West Suffolk Col
118
2929
Bank
Hol
iday
1
21
1811
312
331
522
111
1824
11
33
45
2918
524
617
617
4
51
517
185
518
5
618
3112
185
518
6
73
3118
131
7
815
171
3118
8
918
53
618
9
1018
155
13
610
117
515
111
118
11
122
115
115
1815
511
1812
135
2511
1815
63
518
511
13
145
515
318
1523
114
155
511
15
162
315
1116
1729
3018
262
172
217
187
186
2320
292
2930
1818
1929
3018
623
1311
235
1819
2013
523
1829
3118
1122
517
20
2129
295
2815
218
718
621
2220
3129
2529
1822
2318
511
3128
23
2425
185
116
1824
2512
2029
Bank
Hol
iday
182
3120
25
266
Bank
Hol
iday
511
1812
26
2718
75
1118
2831
27
286
1812
247
1826
126
28
296
718
225
29
3023
2918
520
30
3128
1829
31
Daikin UK training 2013/1418
Daikin Airconditioning UK has joined forces with The National Skills Academy for Environmental Technologies to create its first national Manufacturer Hub. The pioneering Daikin UK Manufacturer Hub is the first to be developed by the Skills Academy to provide bespoke training for an individual manufacturer’s products.
It will complement and interact with the Skills Academy’s
network to enable trainees to gain qualifications in air-to-water
heat pump technology, allowing them to work towards a
Microgeneration Certification Scheme (MCS) accreditation and
be fully qualified to install Daikin renewable technology systems.
The aim is to increase the number of MCS accredited installers
throughout the UK. Designed to offer assurances that products
and services meet rigorous and consistent Government
standards, easing any end-user concerns about adopting an
innovative product or technology.
The Skills Academy provides training in the design, installation
and maintenance of technologies such as solar thermal,
photovoltaics, heat pumps, water harvesting and recycling.
Comprising 23 ‘hub’ colleges, the Academy works to offer
accredited environmental technologies training, all of which
meets the requirements for MCS certification.
The Daikin UK Manufacturer Hub will
initially be based at three of the vocational
training venues, with whom Daikin UK has
already formed working relationships.
These venues include College of North
West London, Dudley College and PGL
Training in Exeter.
Daikin UK working in conjunction with The National Skills Academy
Daikin UK training 2013/14 19
Prerequisites: DUK-CO1: N/SVQ Level 2 or 3 plumbing, or heating and ventilation, or oil fired system, or gas installation, plus G3 unvented systems, water regulations / water byelaws (WRAS), energy efficiency C&G 6084. Please note* This list is not exhaustive, please contact your nearest college for further details.
DUK-CO2: Successful prior completion of the above DUK-CO1.
DUK-CO3: N/SVQ Level 2 or 3 plumbing, or heating and ventilation, or oil fired system, or gas installation, plus G3 unvented systems, water regulations / water byelaws (WRAS), energy efficiency C&G 6084. Please note* This list is not exhaustive, please contact your nearest college for further details.
DUK-CO4: Preferred, proof of existing QCF/NOS ASHP & GSHP, installation commissioning and customer hand over attendance with certification detail. Please contact your regional college for further DUK-CO4 prerequisite assistance if required.
DUK-CO5: Successful prior completion of the above DUK-CO4.
Industry accredited heating coursesA range of Daikin UK heating courses have been accredited by EAL and these are offered at The College of North West London, Dudley College Energy Training Hub and PGL Training college. To make a booking please contact your nearest college directly, see page 24.
Daikin UK / EAL accredited coursesEAL is the specialist, employer-recognised awarding organisation for the engineering, manufacturing, building services and related sectors. The following Daikin UK courses, DUK-CO1, DUK-CO2, & DUK CO3, are accredited by EAL and have been aligned with the National Occupational Standards (NOS). They are recognised by MCS for the purposes of proving specific competencies.
These first three course options listed are ideal for new heat pump installers or recently qualified MCS companies wishing to achieve an Industry recognised qualification. For those who have previously attended accredited AWHP / GSHP courses, Daikin UK and EAL accredited courses, DUK- CO4 & DUK CO5 are also available covering the Daikin Altherma LT range.
DUK-CO1: Generic ASHP & GSHP, + Daikin specific Low Temperature product installation & commissioningDUK-CO2: Generic ASHP & GSHP, + Daikin specific Low Temperature product service and inspectionDUK-CO3: Combined DUK-CO1 + DUK-CO2 (as listed above) DUK-CO4: Daikin product only, Low Temperature product installation & commissioningDUK-CO5: Daikin product only, Low Temperature product service and inspection
Course reference
Company type DUK-CO1 DUK-CO2 DUK-CO3 DUK-CO4 DUK-CO5
Non MCS registered company 4 4 4 Optional* Optional*
MCS registered company with NO previous generic ASHP & or GSHP QCF/NOS MCS recognised qualification certification 4 4 4 Optional* Optional*
MCS registered company with previous generic ASHP & or GSHP QCF/NOS MCS recognised installation and maintenance qualification certification N/A 4 N/A 4 Optional*
MCS registered company with previous generic ASHP & or GSHP QCF/NOS MCS recognised installation, maintenance, service and inspection qualification certification
N/A N/A N/A 4 4
Course duration 4 days 2 days 5 days 2 days 1 day
Cost per attendee per coursePlease contact your nearest college for exact costs
From £545.00 From £410.00 From £825.00 From £300.00 From £150.00
4 Recommended or possible route of attendance with NOS industry accreditation* Available to attend with Daikin UK & EAL accredited certification. Please refer to prerequisites belowN/A Attendance not required, generic qualification already held
Selecting the right Daikin UK / EAL accredited courseUse the chart below to select the most suitable courses for your company.
Daikin UK training 2013/1420
Course reference
Industry accredited course contents DUK-CO1 DUK-CO2 DUK-CO3 DUK-CO4 DUK-CO5
Generic: Air and ground source heat pump contents covered
Knowledge unit for installation of air source heat pump environmental technologies 4 8 4 8 8
Practical unit for installation of air source heat pump environmental technologies 4 8 4 8 8
Knowledge unit for repair and maintenance of air source heat pump technologies 8 4 4 8 8
Practical unit for repair and maintenance of air source heat pump technologies 8 4 4 8 8
Knowledge unit for installation of ground source heat pump 4 8 4 8 8
Practical unit for installation of ground source heat pump environmental technologies 4 8 4 8 8
Knowledge unit for repair and maintenance of ground source heat pump technologies 8 4 4 8 8
Practical unit for repair and maintenance of ground source heat pump technologies 8 4 4 8 8
Daikin Altherma product specific units include
Knowledge unit for installation of Daikin air-water heat pump environmental technologies 4 8 4 4 8
Practical unit for installation of Daikin air-water heat pump environmental technologies 4 8 4 4 8
Knowledge unit for repair and maintenance of Daikin air-water heat pump technologies 8 4 4 8 4
Practical unit for repair and maintenance of Daikin air-water heat pump technologies 8 4 4 8 4
Daikin Altherma product specific contents include
Product introduction 4 8 4 4 8
Options and technical specifications 4 8 4 4 8
Daikin Altherma selection software 4 8 4 4 8
Mechanical installation 4 8 4 4 8
Electrical installation 4 8 4 4 8
System water and refrigerant flows 4 8 4 4 8
Pre-start up checks and field settings 4 8 4 4 8
Use of the remote control interface 4 8 4 4 8
Advanced functional overview 4 8 4 4 8
Recommended service and maintenance 4 8 4 4 8
Fault finding 8 4 4 8 4
Solar connections and control 4 8 4 4 8
Inside out of the Hydrobox 8 4 4 8 4
Inside out of the condensing unit 8 4 4 8 4
Inside out the hot water cylinder 8 4 4 8 4
Internal pipework, refrigerant and water 4 8 4 4 8
Internal wiring detail 4 8 4 4 8
Operational component explanation 4 8 4 4 8
Correct and adverse effects of incorrect field settings 8 4 4 8 4
Includes online examination & EAL industry accredited certification for successful candidates 4 4 4 8 8
Daikin UK & EAL accredited certification 8 8 8 4 4
Regional technical college locations available to attend
College of North West London 4 4 4 4 4
Dudley College Energy Training Hub 4 4 4 4 4
PGL Training College 4 4 4 4 4
Course duration 4 Days 2 Days 5 Days 2 Days 1 Day
Cost per attendee per course (ex vat) including registration and certification fees from £545.00 from £410.00 from £825.00 from £300.00 from £150.00
Daikin UK & EAL industry accredited QCF Level 3 (National Occupational Standard aligned) course contents covered:
Daikin UK training 2013/14 21
How to book a courseTo book a place on one of the Daikin UK Technical training courses, references starting DUK-SE, please go to Daikin’s new booking system at the following web site address: www.daikintraining.co.uk
For all Regional Technical College courses, references starting DUK-CO, please contact your nearest Technical College direct for further information Contact details are on page 24.
Daikin UK training 2013/1422
Daikin UK has traditionally handled all product training through their established in-house training centres, via short courses and on-site training. However, these courses are designed for experienced engineers in this sector of the industry. The air conditioning, refrigeration and heating market in the UK continue to grow, to support this market, the next generation of engineers need to be well trained on all the modern technical features. To achieve this, there needs to be a dialogue and active support between training providers and the industry.
Regional college providers offer structured courses to educate and train engineers from the beginning. They also offer specialised short courses, for more experienced engineers. However, they also recognise the need for assistance from the manufacturers, to enhance their facilities with modern technology, hence our developed regional working relationship.
Industry related courses
Daikin UK training 2013/14 23
Commercial Pipe Work and Brazing up to 7/8” Pipe Work Duration: 1 day
Attendees: 6-10 engineers
Reference: DUK-CO6
Who is it forThose with proven practical experience, requiring theoretical and practical tuition on the industry related procedures required for the fabrication of refrigerant copper pipe work.
Certification CITB/BRA Commercial Brazing Standards
Example of contents> Health and safety issues> Introduction to brazing> Brazing equipment preparation> Correct ignition procedures> Practical brazing of pipe work
F-Gas (category 1) City & Guilds 2079Duration: 2.5 daysAttendees: 6-10 engineers
Reference: DUK-CO7
Who is it forExperienced refrigeration and air conditioning engineers. Theoretical and practical tuition will be received on the industry’s latest requirements relating to the F-Gas regulations.
Certification City & Guilds 2079
Example of contents> Understanding of environmental impact of F-Gas> Identifying condition and state of refrigerant> Attaching gauge manifold to a split system running,
pump down and removal> Leak testing> Monitoring system performance for indication of refrigerant
charge & possible shortage> Equipment record keeping requirements
Refrigerant Safe Handling, CITB Commercial Pipe Work Brazing and Split Air Conditioner Installation Practices
Duration: 3 daysAttendees: 6-10 engineers
Reference: DUK-CO8
Who is it forHeating engineers as a first stage introduction to the refrigeration and air conditioning installation and operational related aspects, including brazing and refrigerant safe handling.
Certification CITB/BRA Commercial Brazing Standards
Example of contents> Introduction to refrigeration and air conditioning> Understanding of environmental impact of F-Gas> Basic refrigeration cycle> Various tools and pipe connecting techniques> RAC installation practice> Pressure testing> Evacuation> Refrigerant charging> Leak testing> Equipment record keeping requirements
F-Gas (category 1) City & Guilds 2079, Including an Introduction to Refrigerant Pipe Work Installation Practices
Duration: 5.5 daysAttendees: 6-10 engineers
Reference: DUK-CO9
Who is it forHeating engineers who have previously successfully completed the DUK-CO8 refrigeration and air conditioning introductory course, now wishing to further expand their knowledge with the opportunity to obtain C&G 2079 certification.
Certification City & Guilds 2079 & CITB/BRA Commercial Brazing Standards
Example of contents> Basic thermodynamics> Identifying condition and state of refrigerant> Pressure enthalpy chart> RAC installation practice> Complete brazed test piece to be fitted to refrigeration plant> Pressure testing> RAC maintenance and fault finding> Refrigerant recycle and recovery
Daikin UK training 2013/1424
For advice, bookings and costs, please contact your nearest participating college...
City of Bath College
Avon Street, Bath, Avon BA1 1UP Contact: Darran MarksTel: 01225 328 635Email: [email protected]: www.citybathcoll.ac.uk
Dudley College
Dudley College Training Ltd Energy Training Hub 3-4 Railway Street, Great Bridge Tipton DY4 7AD Contact: Stephanie ReevesTel: 0121 522 0251Email: [email protected]: www.energytraininghub.co.uk
College of North West London
Dudden Hill Lane, London NW10 2XD Contact: Feraline WhyteTel: 0208 208 5276Fax: 0208 208 5279Email: [email protected]: www.cnwl.ac.uk
PGL Training
Clyst Works, Clyst Road, Topsham Exeter EX3 0DBContact: Andy WhiteTel: 01392 437 373Fax: 01392 877 277Email: [email protected]: www.pgltraining.com
West Suffolk College
The Milburn Centre Anglian Lane, Bury St Edmund’s Suffolk IP32 6RA Contact: Liz Creasy Tel: 01284 716 246 Fax: 01284 750 561 Email: [email protected] Web: www.westsuffolkcollege.ac.uk
For more information or to apply for one of the listed City & Guilds or CITB/BRA college courses, please contact your nearest college directly.
Please note, both the West Suffolk College and the PGL Training College do not offer any of the following Training course references: DUK-CO6, DUK-CO7, DUK-CO8, DUK-CO9 as listed on page 23.
Daikin UK and regional college collaborations
Open weekdays 09.00 – 17.30
T: 0845 641 9260E: [email protected]: 0845 641 9075www.daikin.co.uk
your comfort. our world.
Daikin Airconditioning UK Limited The Heights Brooklands Weybridge Surrey KT13 0NY Tel 0845 6419000 Fax 0845 6419009 www.daikin.co.uk
UKE
PCEN
13-9
10 /
04.
13 /
Des
ignH
Q. C
opyr
ight
201
3 D
aiki
nPr
inte
d in
the
UK
on F
SC c
ertif
ied
pape
r fro
m s
usta
inab
le s
ourc
es.
Visit www.eca.gov.uk/etl and type ‘Daikin’ in the quick search box for details of the latest ECA qualifying Daikin units
Daikin products are distributed by:
The present catalogue is drawn up by way of information only and does
not constitute an offer binding upon Daikin UK. Daikin UK has compiled the
content of this catalogue to the best of its knowledge. No express or implied
warranty is given for the completeness, accuracy, reliability or fitness for
particular purpose of its content and the products and services presented
therein. Specifications are subject to change without prior notice. Daikin UK
explicitly rejects any liability for any direct or indirect damage, in the broadest
sense, arising from or related to the use and/or interpretation of this catalogue.
All content is copyrighted by Daikin UK.
Daikin units comply with the European regulations that guarantee the safety of the product.
Scotland Region
0845 641 9330
Northern Region
0845 641 9340
Midlands Region
0845 641 9370
Western Region
0845 641 9320
North London
0845 641 9360
South London
0845 641 9355
FSCCarbon
Balanced Paper