dairy equipment product guide - mgm companymgmcompany.com › catalog ›...
TRANSCRIPT
-
DAIRY EQUIPMENTPRODUCT GUIDE
MANUFACTURES — DISTRIBUTORS —DIRECT FACTORY AGENTSWWW.MGMCOMPANY.COM
WISCONSIN—FLORDIA—-UNITED KINGDON
2013
-
2
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
2
MGM Company, Inc. WWW.MGMCOMPANY.COM
TABLE OF CONTENTS
MILK LINE & ACCESSORIESCLAMPS 4FERRULES 5, 6END CAPS 7ELBOWS, 45’s, U BENDS 8, 9TEE’S & Y’S 10REDUCERS & ADAPTERS 11, 12, 13HEX NUTS 13Y-BALL CHECK VALVES 14, 15AIR BLOW VALVES 14, 15BUTTERFLY VALVES 16IN LINE BALL CHECK VALVE 11, 14GASKETS & SCREENS 17, 18PIPELINE HANGERS 19MILK INLETS & VALVES 20CLAWS & SHELL / AIR FORKS 21SHUT OFFS 21
RECEIVERSRECEIVERS 22, 26MOISTURE TRAPS 24TRAP BENDS 24FLOAT BALLS 24MILK PUMPS 25ACRYLIC COVERS 25LIQUID LEVEL CONTROL 26
MILK FILTRATIONFILTER FRAMES 27, 28DISPENSERS 55
VACUUM LINEPVC TANKS & PRE-AIR FILTERS 30 — 35PLASTIC GATE VALVES 36, 37PVC PIPE 38PVC FITTINGS 39 — 44DRAINS & CHECK VALVES 45PULSATORS 46STALL COCKS 46
WASHINGWASH TANKS 47DRAIN BASKETS 48NO HUB COUPLINGS 48DISTRIBUTION TEES 49BENDER WASHING EQUIPOMENT 50 — 53
LIVESTOCK CARE & MILKHOUSELEG BANDS 54SPRAYERS 54TOWELS & DISPENSERS 55FREISH COW BUCKETS 21
-
3
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
3
MGM Company, Inc. WWW.MGMCOMPANY.COM
We offer a complete line of 3A approved stainless steel fittings, clamps and gaskets. Listed are only those commonlyused in the dairy industry. All of the fittings listed are Type 304 Stainless and are Polished ID/OD.
Type 316 Fittings are available upon request.
304 STAINLESS STEEL CLAMPS AND FITTINGS
ISO 9001 Certified Factory
-
4
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
4
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Tube Size A152915 1.0” & 1.5” 2.080152920 2.0” 2.610152925 2.5” 3.140152930 3.0” 3.670152940 4.0” 4.780
Part No. Tube Size A
152115 1.0” & 1.5” 2.122152120 2.0” 2.654152125 2.5” 3.185152130 3.0” 3.717152140 4.0” 4.820152160 6.0” 6.695152161 Wing Nut w/hole
152105 .50” & .75” 1.062
304 STAINLESS STEEL CLAMPS
Heavy Duty Clamp Single Pin13MHHM
Part No. Tube Size A152710 1.0” & 1.5” 2.122152712 2.0” 2.654152716 2.5” 3.185152713 3.0” 3.717152714 4.0” 4.820
V Insert Clamp 13WGCDairy Clamp (Thumb Screw)
Adjustable Toggle Clamp13MHLA
Part No. SAE Size Min Max Min Max
150000 6 .44 .78 11 20
150003 12 .69 1.25 18 32
150007 28 1.31 2.25 33 57
Part No. SAE Size Min Max Min Max
150019 88 5.06 6.00 129 152
150022 116 6.50 7.75 165 197
152955 128SS 5.69 8.50 144 216
150025 152 7.19 10.00 182 254
150027 176 8.69 11.50 225 292
150029 200 10.19 13.00 259 330
150033 248 13.19 16.00 335 406
150015 60 3.31 4.25 84 108
150014 56 3.06 4.00 78 102
150013 52 2.81 3.75 71 95
150008 32 1.56 2.50 40 64
150009 36 1.81 2.75 46 70
150012 48 2.56 3.50 65 89
Series 300 Marine Grade Gold Seal1/2” wide worm gear clamps areconstructed of all stainless steel.The all stainless steel 300 clampprovides for better corrosion resis-tance when used in applicationswhere there are high concentra-tions of chlorides. This featuremakes it an ideal fit in the dairyindustry. Clamps are available inboxes of 10 or bulk stock. Boxes of10 are ideal for distribution todealers with service and installa-tion trucks.
Stainless Steel Band Clamps.
-
5
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
5
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Tube Size
152220 2.0”152225 2.5”152230 3.0”152240 4.0”
152215 1.5”
A
1.1251.1251.1251.1251.125
B
1.3701.8702.3702.8703.834
C
1.502.002.503.004.00
152210 1.0” 1.125 .8760 1.00
152415 1.5”152420 2.0”152425 2.5”152430 3.0”152440 4.0”
Part No. Tube Size A B
.500 1.370
.500 1.870
.500 2.370
.500 2.870
.625 3.834
152410 1.0” .500 .8700C
1.001.502.002.503.004.00
Long Butt Weld Ferrule L14AM
Short Weld Ferrule 14WMPS
Roll on Ferrule 14RMP
Part No. Tube Size A B152310 1.0” .7500 1.005152315 1.5” 1.125 1.505152320 2.0” 1.312 2.005152325 2.5” 1.375 2.505152330 3.0” 1.437 3.005152340 4.0” 1.500 4.005
Tank Welding Ferrule Light14WLMP
Part No. Tube Size A B C152450 1.5” 3.00 1.370 1.50152451 2.0” 3.00 1.870 2.00152452 2.5” 3.00 2.370 2.50152453 3.0” 4.00 2.870 3.00152454 4.0” 4.00 3.834 4.00
Ferrule Short Threaded 15TFRS
Part No. Tube Size A B154050 1.0” .718 .870154051 1.5” .718 1.370154052 2.0” .750 1.870154053 2.5” .875 2.700154054 3.0” .906 2.870154055 4.0” 1.031 3.834
304 STAINLESS STEEL FERRULES
-
6
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
6
MGM Company, Inc. WWW.MGMCOMPANY.COM
304 STAINLESS STEEL FERRULES
Part No. Tube Size A B154000 1.0” 1.375 .870154001 1.5” 1.500 1.370154002 2.0” 1.500 1.870154003 2.5” 1.750 2.370154004 3.0” 1.750 2.870154005 4.0” 1.750 3.834
Part No. Tube Size A B154010 1.0” .812 1.000154011 1.5” 1.125 1.500154012 2.0” 1.375 2.000154013 2.5” 1.500 2.500154014 3.0” 1.675 3.000154015 4.0” 1.675 4.000
Part No. Tube Size A B154020 1.0” .718 .870154021 1.5” .718 1.370154022 2.0” .750 1.870154023 2.5” .875 2.370154024 3.0” .906 2.870154025 4.0” 1.031 3.834
Part No. Tube Size A B154030 1.0” 1.375 .870154031 1.5” 1.500 1.370154032 2.0” 1.500 1.870154033 2.5” 1.750 2.370154034 3.0” 1.750 2.870154035 4.0” 1.750 3.834
Ferrule Long Threaded 15A
Ferrule Threaded Roll-On 15R
Ferrule Short Plain 14PRFS
Ferrule Long Plain L14A
Ferrule Roll-On Plain 14R
Part No. Tube Size A B154040 1.0” .750 1.000154041 1.5” 1.125 1.500154042 2.0” 1.312 2.000154043 2.5” 1.375 2.500154044 3.0” 1.437 3.000154045 4.0” 1.500 4.000
-
7
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
7
MGM Company, Inc. WWW.MGMCOMPANY.COM
ECCENTRIC NIPPLED END CAPS
End cap 1.5” 2” 2.5” 3”
INLET O.D.
5/8” 152654E 152659E 152623E 152633E
3/4” 152653E 152622E NA 152662E
7/8” 152655E 152661E NA NA
1” 152651 152621E NA NA
CONCENTRIC NIPPLED END CAPS
End cap 1.5” 2” 2.5” 3”
INLET O.D.
5/8” 152654 152659 152623 152663
3/4” 152653 152622 NA 152662
7/8” 152655 152661 NA NA
1” 152652 152621 NA NA
CONCENTRIC
ECCENTRIC
Stainless Steel Bevel Seat Solid EndCap 16A.
White Poly Bevel Seat End Caps.
Part No. Tube Size A154081 1.0” 1.312154082 1.5” 1.843154083 2.0” 2.375154084 2.5” 2.906154085 3.0” 3.437154086 4.0” 4.500
Stainless Steel Clamp Solid EndCap 16AMP
A B
.250 2.516
.250 3.047
.250 3.579
.312 4.682
Tube Size
2.0”2.5”3.0”4.0”
Part No.
152620152625152630152640
152615 1.0” & 1.5” .250 1.984
Part No. Tube Size A192001 1.5” 1.843192002 2.0” 2.375192003 3.0” 3.437
304 STAINLESS STEEL END CAPS
-
8
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
8
MGM Company, Inc. WWW.MGMCOMPANY.COM
Elbow Clamp 900 2CMPClamp Ends
Part No. Tube Size A R152709 1.0” 2.000 1.500152715 1.5” 2.750 2.250152720 2.0” 3.500 3.000152725 2.5” 4.250 3.750152730 3.0” 5.000 4.500152740 4.0” 6.625 6.000
Part No. Tube Size A R152754 1.0” 1.125 1.500152755 1. 5” 1.437 2.250152757 2.0” 1.750 3.000152759 2.5” 2.062 3.750152761 3.0” 2.375 4.500152763 4.0” 3.125 6.000
Part No. Tube Size A B152475 1.5” 3.438 2.937152476 2.0” 4.562 4.062152477 2.5” 5.688 5.187152478 3.0” 6.812 6.312152479 4.0” 8.937 8.312
Wall.065.065.065.065.083
Elbow Clamp 900 x Butt-weld L2CM
Elbow Clamp 450 2KMPClamp Ends
304 STAINLESS STEEL ELBOWS
Part No. Tube Size A B Wall152470 1.5” 1.625 2.125 .065152471 2.0” 2.312 2.812 .065152472 2.5” 3.000 3.500 .065152473 3.0” 3.688 4.188 .065152474 4.0” 4.812 5.437 .083
Elbow Clamp 450 x Butt-weld 2KM
Elbow Clamp 900 w/ Hex Nut & Bevel PlainEnd 2FMP-14
Part No. Tube Size A B154070 1.5” 2.750 2.968154071 2.0” 3.500 3.750154072 2.5” 4.250 4.625154073 3.0” 5.000 5.406154074 4.0” 6.625 7.031
-
9
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
9
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Tube Size A Wall152840 1.0” 2.062 .065152841 1.5” 2.937 .065152842 2.0” 4.062 .065152843 2.5” 5.187 .065152844 3.0” 6.312 .065152845 4.0” 8.312 .083
Part No. Tube Size A Wall152850 1.0” 1.500 .065152851 1 5” 2.250 .065152852 2.0” 3.000 .065152853 2.5” 3.750 .065152854 3.0” 4.500 .065152855 4.0” 6.000 .083
Part No. Tube Size A Wall152860 1.0” 1.188 .065152861 1.5” 1.625 .065152862 2.0” 2.312 .065152863 2.5” 3.000 .065152864 3.0” 3.688 .065152865 4.0” 4.812 .083
Part No. Tube Size A R152870 1.0” .625 1.50152871 1.5” .937 2.25152872 2.0” 1.250 3.00152873 2.5” 1.562 3.75152874 3.0” 1.875 4.50152875 4.0” 2.500 6.00
Wall.065.065.065.065.065.083
304 STAINLESS STEEL ELBOWS
Elbow Long Butt-weld 900 2S
Elbow Short Butt-weld 900 2WCL
Elbow Long Butt-weld 450 2KS
Elbow Short Butt-weld 450 2WK
U Bend Mitered
Part No. Tube Size A B155866 2.0” 6.00 7.000155867 3.0” 6.00 7.800155868 4.0” 9.00 9.500
-
10
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
10
MGM Company, Inc. WWW.MGMCOMPANY.COM
Reducing TeeClamp Ends 7RMP
Tee Clamp 7MP152961 1.5”152962 2.0”152963 2.5”152964 3.0”152965 4.0”
5.5007.0007.0007.5009.000
2.7503.5003.5003.7504.500
152960 1.0” 4.750 2.375Part No. Tube Size A B
Part no. A152967 5.125152969 5.688152970 6.188152971 6.188152972 8.125
B2.5622.8443.0933.0934.063
C2.4062.8122.9063.0633.563
Tube Size2.0” x 1.5”2.5” x 2.0”3.0” x 1.5”3.0” x 2.0”4.0” x 2.0”
Part No. Tube Size A B Wall152880 1.0” 3.75 1.875 .065152881 1.5” 4.50 2.250 .065152882 2.0” 6.00 3.000 .065152883 2.5” 6.00 3.000 .065152884 3.0” 6.50 3.250 .065152885 4.0” 7.75 3.875 .083
Tee Long Butt-weld L7WWW
Tee Short Butt-weld 7WWW
Part No. Tube Size A Wall152886 1.0” 2.25 .065152887 1.5” 3.312 .065152888 2.0” 4.124 .065152889 2.5” 4.688 .065152890 3.0” 5.188 .065152891 4.0” 6.876 .083
B1.1251.6562.0622.3442.5943.438
304 STAINLESS STEEL TEES
Lateral Y Clamp 28AMP
Part No. Tube Size A B C152500 1.0” 7.000 1.500 5.500152501 1.5” 8.375 1.688 6.688152502 2.0” 9.750 2.125 7.625152503 2.5” 11.000 2.000 9.000152504 3.0” 11.750 2.375 9.375
-
11
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
11
MGM Company, Inc. WWW.MGMCOMPANY.COM
304 STAINLESS STEEL ADAPTORS
Part No. Tube Size A154060 1.5” 1.843154061 2.0” 1.875154062 2.5” 2.000154063 3.0” 2.031154064 4.0” 2.344
Part No. Tube Size A152459 1.5” x 1.5” 1.687152460 2.0” x 2.0” 2.312152461 2.5” x 2.5” 2.344152462 3.0” x 3.0” 3.094152463 4.0” x 4.0” 3.406
B1.502.002.503.004.00
Clamp X Thread Adaptor17MP-15
Clamp X Hose Adaptor14MPHR
Part No. Tube Size A B152464 1.0” x 1.0” 2.250 .985152465 1.5” x 1.5” 2.250 1.025152466 2.0” x 2.0” 2.638 1.058152467 3.0” x 3.0” 3.070 1.634
Adaptor Clamp x Male NPT21MP– N.P.T. Pipe ThreadNon-3A
Adaptor Clamp x Hex nut17MP-14
Part No. Tube Size A152510 1.5” x 1.5” 3.00152511 2.0” x 2.0” 3.00152512 3.0” x 3.0” 3.75
In Line Ball Check Valve
Part No. Description152700 1.5” Check Valve Complete152701 Ball for 1.5” Valve152702 Pin For 1.5” Valve152705 2.0” Check Valve Complete152706 Ball for 2.0” Valve152707 Pin for 2.0” Valve
A2.5”
2.5”
-
12
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
12
MGM Company, Inc. WWW.MGMCOMPANY.COM
304 STAINLESS STEEL REDUCERS
Part No. Tube Size A154077 2.0” x 1.5” 3.468154078 3.0” x 2.0” 5.656
Concentric Reducer PlainBevel X Threaded. B3115.
Reducer Butt-weld CncentricL31W
Part No. Tube Size A B152900 1.5” x 1.0” 2.00 1.50152901 2.0” x 1.5” 2.00 2.00152902 2.5” x 1.5” 4.00 2.50152903 2.5” x 2.0” 2.00 2.50152904 3.0” x 1.5” 6.00 3.00152905 3.0” x 2.0” 4.00 3.00152906 3.0” x 2.5” 2.00 3.00152907 4.0” x 3.0” 4.00 4.00
C1.001.501.502.001.502.002.503.00
Wall.065.065.065.065.065.065.065.083
Part No. Tube Size A B C Wall152990 1.5” x 1.0” 2.00 1.50 1.00 .065152991 2.0” x 1.5” 2.00 2.00 1.50 .065152992 2.5” x 2.0” 2.00 2.50 2.00 .065152993 3.0” x 1.5” 6.00 3.00 1.50 .065152994 3.0” x 2.0” 4.00 3.00 2.00 .065152995 3.0” x 2.5” 2.00 3.00 2.50 .065152996 4.0” x 3.0” 4.00 4.00 3.00 .083
Reducer Butt-weld EccentricL32W
Reducer Clamp Concentric 3114MP
Part No. Tube Size A152830 2.0” x 1.5” 3.000152832 2.5” x 2.0” 3.000152833 3.0” x 1.5” 7.000152834 3.0” x 2.0” 5.000152835 3.0” x 2.5” 3.000152836 4”.0” x 3.0” 5.125
Part No. Tube Size A152486 2.0” x 1.5” 3.000152487 2.5” x 2.0” 3.000152488 3.0” x 1.5” 7.000152489 3.0” x 2.0” 5.000152490 4.0” x 3.0” 5.125
Reducer Clamp Eccentric 3214MP
-
13
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
13
MGM Company, Inc. WWW.MGMCOMPANY.COM
304 STAINLESS STEEL REDUCERS HEX NUTS & WRENCHES
Bevel Seat Hex Nut Stainlesssteel. 13H.
Wall Plate #29. Stainless steel decorativewall plate used on milk like tubing.
Part No. Tube Size A B152010 1.0” .906 1.812152015 1.5” .968 2.406152020 2.0” 1.062 3.000152025 2.5” 1.870 3.594152030 3.0” 1.281 4.188152040 4.0” 1.500 5.438
Part No. Tube Size A B C154090 1.5” x 1.0” 12.000 2.406 1.812154091 2.0” x 1.5” 14.000 3.002 2.406154092 2.5” x 2.0” 16.500 3.594 3.000154093 3.0” x 2.0” 18.000 4.188 3.000154094 3.0” x 2.5” 18.000 4.188 3.594
Double End Hex Wrench 25HA
Single End Hex Wrench 25H
Part No. Tube Size A B154095 1.0” 10.500 1.812154096 1.5” 12.000 2.406154097 2.0” 14.000 3.000154098 2.5” 16.250 3.594
154100 4.0” 19.500 5.438154099 3.0” 18.500 4.188
Part No. Tube Size A B154105 1.0” 1.0 5.0154106 1.5” 1.5 5.0154107 2.0” 2.0 5.0154108 2.5” 2.5 6.0
154110 4.0” 4.0 7.0154109 3.0” 3.0 6.0
Bevel Seat White Poly Hex Nut.13H.Part No. Tube Size A B192008 1.5” .968 2.406192011 2.0” 1.062 3.000192013 3.0” 1.281 4.188
Concentric Reducer Threaded XClamp B15C31
Part No. Tube Size A154080 2.0” x 1.5” 3.250
Part No. Tube Size A154079 2.0” x 1.5” 3.220
Concentric Reducer Plain Bevel xClamp B14C31.
-
14
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
14
MGM Company, Inc. WWW.MGMCOMPANY.COM
AIR BLOW & Y- BALL CHECK VALVES
This valve is designed to pressurize lines with air to clean out productor cleaning solutions. It is failsafe because the simple air-to-openspring-to-close mechanism prevents back flow. Normally used with aY-ball Check Valve.
Features:-316 Stainless Steel Construction-Sizes for 1 1/2” to 4”-Conforms to 3A accepted practice 604-05-Filter required for use with milk
Sizing Guide
When usingY-Ball Check Valve
UseAir Blow Valve
1.5” 2.0”
2.0” 2.5”
2.5” 3.0”
Complete Valve W/ QuickConnect Air Connection
Complete Valve W/ FNPT .50”Air Connection
Size
152726 158150 1.5”
152727 158195 2.0”
152728 158200 2.5”
158203 158205 3.0”
Y-Ball Check ValvesThese valve are used to prevent reverse flow in systems moving liquid products. When the liquid flows into the inlet, the PTFE ball rolls up in thebranch of the valve allowing full fluid flow. When the flow stops, equalizing the pressure, the ball rolls back into the seat, preventing back flow.
Features of both models:-Polished ID & OD to 3A Standards.-316 stainless steel construction-Air Blow Valve can be added.-Maximum temperature rating of 250 F.
Part No. Complete Valve Line Size
155203 1.5”
155204 2.0”
155205 3.0”
Air Blow Valve
Part No. Complete Valve Line Size
155115 1.5”
155116 2.0”
Single Piece Model Two Piece Model
In Line Ball Check ValvePart No. Description152700 1.5” Check Valve Complete152701 Ball for 1.5” Valve152702 Pin For 1.5” Valve152705 2.0” Check Valve Complete152706 Ball for 2.0” Valve152707 Pin for 2.0” Valve
A2.5”
2.5”
-
15
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
15
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Ref. No. Description
155230 4, 4A, 4B, 4C, 4D Air Blow Valve Service Kit
152120 2 Heavy Duty Clamp
181515 4 1.5” Gasket w/#10 Screen
155215 Repl. Filter Box of 200
Y-Ball Check Valve Parts
Part No. Ref. No. Description
155221 5A Ball Teflon for 1.5” Y-Ball Valve
155220 5A Ball Teflon for 2.0” Y-Ball Valve
155222 5B Seat for 1.5” Y-Ball Valve
152620 4 2.0” Solid End Cap
152625 4 2.5” Solid End Cap
159754 1.5” Ball and Seat Kit
159755 2.0” Ball and Seat Kit
152120 3 2.0” Heavy Duty Clamp
152125 3 2.5” Heavy Duty Clamp
155223 5B Seat for 2.0” Y-Ball Valve
Repair kits, containing a cap clamp gasket, ball and EPDM/CF-8M seat are available.
AIR BLOW & Y- BALL CHECK VALVES SPARE PARTS
Part No. Description
155210 Ball Buna for 1.5” Y-Ball Valve
155211 Ball Viton for 1.5” Y-Ball Valve
155212 Ball Buna for 2.0” Y-Ball Valve
155213 Ball Viton for 2.0” Y-Ball Valve
152120 2.0” Heavy Duty Clamp
152125 2.5” Heavy Duty Clamp
152620 2.0” Solid End Cap
152625 2.5” Solid End Cap
Parts for Single Piece ValveParts for Single Piece Valve
Service Kit Contains: 1-304 SS Spring, 1-SS Screen w/gasket, 1-StemGuide, 1-304 SS Retainer, 1-304 SS Stem w/plug.
Parts for Air Blow Valves
-
16
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
16
MGM Company, Inc. WWW.MGMCOMPANY.COM
STAINLESS BUTTERFLY VALVES
Part No. Tube Size D153010 1.0” 3.50153015 1.5” 3.50153020 2.0” 3.80153025 2.5” 3.80153030 3.0” 4.10153040 4.0” 4.80
Part No. Tube Size A153071 1.5” 3.50153072 2.0” 3.80153073 3.0” 4.10
Part No. Tube Size A153075 1.5” 1.90153077 2.0” 2.00153079 3.0” 2.50
Part No. Tube Size A153049 1.5” 3.50153050 2.0” 3.80153051 3.0” 4.10
SPARE PARTS FOR BUTTERFLY VALVES
Part No. Description153052 Handle w/Locking Assy. for 1.0” to 3.0” Valve153054 Handle w/Locking Assy. for 4.0” Valve153053 Black Knob for Handle152413 Bolt for all Valves152142 Set screw for all Valves152143 Wing Nut only
Silicone Seat (red) Size EPDM (black)
153055 1.5” 153056153057 2.0” 153058153059 2.5” 153060153061 3.0” 153062153063 4.0” 153064
153090 1.0” 153091
REPLACEMENT SEALS
4 position locking handle – assembled with wing nuts for easy seal replacement - silicone seals standard – 304 StainlessPolished ID/OD
Part No. Tube Size A153045 1.5” 3.50153047 2.0” 3.80
CLAMP X CLAMPBUTTERFLY VALVE
THREAD X THREADBUTTERFLY VALVE
WELD X WELDBUTTERFLY VALVE
THREAD X MALVE BEVEL SEAT WITHCAPTIVE HEX NUTBUTTERFLY VALVE
THREAD X CLAMPBUTTERFLY VALVE
-
17
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
17
MGM Company, Inc. WWW.MGMCOMPANY.COM
MGM Company offers a fill line of approved clamp and bevel seat pipeline gaskets. Selectfrom Buna (rubber), Teflon, EPDM or silicone. We also stock replacement valve O-ringsand tabbed valve gaskets. We will source special rubber components.
PIPELINE GASKETS
DUCKBILL DRAINS
FLAPPER VALVES
RUBBER COUPLINGS FOR VACUUM LINES
NO HUB COUPLINGS FOR DRAIN INSTALLATIONS
MILKLINE INLET CLOSURES
MILK VALVE PAD GASKETS
GASKETS W/STAINLESS STEEL SCREENS
SANITARY GASKETS, SCREENS & RUBBER COMPONENTS
-
18
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
18
MGM Company, Inc. WWW.MGMCOMPANY.COM
REFERENCE SIZE
1.0” 1.5” 2.0” 2.5” 3.0’ 4.0”
40B Buna ClampGasket
181110 181115 181120 181125 181130 181140
40T Teflon Clamp Gasket
181410 181415 181420 181425 181430 181440
40F Flanged BunaClamp Gasket
181310 181315 181320 181325 181330 181340
Clamp Gasket w/#10 stainlessScreen
181515 181520 181525 181530 181540
40S Silicone Clamp Gasket 182410 182415 182420 182425 182430 182440
40WS Rubber gasket for SurgeFerruled Lines.
181341 181342
40BST Teflon Bevel SeatGasket
181450 181451 181452 181453 181454
SURGE Flapper for 1.5” lineWith Surge ferrule w/ 1.0” Flap.
276075
Delaval Standard Thick Flapperfor 1.5” Line w/.75” Flap.
275069
Westfalia Flapper for 1.5” linew/1.25” flap.
275070
40BSOBevel Seat Gasket
181210 181215 181220 181225 181230 181240
Bevel Seat EPDM 181211 181216 181221 181226 181231 181241
Bevel Seat Thin (Snap-Tite) 181015 181020
Glass Coupling Gasket 181010
T C Flapper for 1.5” & 2.0”For BouMatic & Classic Valvew/1.25” flap.
271207 271209
SANITARY GASKETS & FLAPPER VALVES
-
19
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
19
MGM Company, Inc. WWW.MGMCOMPANY.COM
PIPELINE HANGERS
Part No.Complete
Tube Size A B Part No. Sleeveonly
195200 1.0” 3.425 1.450 195206
195201 1.5” 4.000 2.125 195207
195202 2.0” 4.500 2.500 195208
195203 2.5” 4.750 3.125 195209
195204 3.0” 5.500 3.750 195210
195205 4.0” 6.750 4.750 195211
Stainless Steel 2 pieceHex Hanger with ABSSleeves.
Part No.Complete
Tube Size A B Part No. Grommetonly
195220 1.0” 3.425 1.450 195226
195221 1.5” 4.000 2.125 195226
195222 2.0” 4.500 2.500 195226
195223 2.5” 4.750 3.125 195226
195224 3.0” 5.500 3.750 195226
195225 4.0” 6.750 4.750 195226
Stainless Steel 2 pieceHex Hanger with RubberGrommets.
195100 U Hanger 6.5” only195101 U Hanger 7.5” Extra Wide only195103 U Hanger Kit for 2.5” & 3.0” Line195107 Hanger clips only
195105 Extended U Hanger only195108 Extended U Hanger Kit for 2.5” & 3.0” line195107 Hanger Clips only
195104 L Hanger only195110 L Hanger Kit for 2.5” & 3.0” Line195107 Hanger Clip only
Block Style Pipe Line Hangers195300 1.0” Hanger Complete195301 1.5” Hanger Complete195302 2.0” Hanger Complete195303 2.5” Hanger Complete195304 3.0” Hanger Complete195305 4.0” Hanger Complete195306 Stainless Steel Rail 48”
U-Hanger with Blue Plas-tic Coating.
Extended U-Hanger withBlue Plastic Coating.
L-Hanger with Blue Plas-tic Coating.
Block Style Pipe LineHanger. (For stainlesssteel tubing)
-
20
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
20
MGM Company, Inc. WWW.MGMCOMPANY.COM
Blue Plastic Milk valve . The standard inthe industry.
MILK VALVES & INLETS
Part No. Description
213115 1.5” Valve Complete
213120 2.0” Valve Complete
213125 2.5” Valve Complete
213130 3.0“ Valve Complete
213102 Square Pad Gasket
213100 O-Ring (for under the SS slide)
CompleteMilk Inlet
MilkLine Size
Nipple ID-OD (inches)
Nipple only(4)
Gasket(2)
Clamp(3)
215180 1.5” - 2.0” 5/8-3/4 215200 213110 213116
215190 2.5” - 3.0” 5/8-3/4 215200 213110 213118
213114 1.5” - 2.0” 13/16-7/8 215220 213112 213116
215210 2.5” - 3.0” 13/16 -7/8 215220 213112 213118
215230 3.0” - 4.0” 13/16-7/8 215220 213112 213140
215175 1.5” - 2.0” 9/16 –5/8 NA 213111 213116
215232 3.0” - 4.0” 15/16-1.0 NA 213113 213140
Nipple ID-OD (mm)
14-16
16-18
16-18
20-22
20-22
20-22
24-26
Part No. Description
213150 1.5” Valve Complete (Strangko)
213152 2.0” Valve Complete (Strangko)
Milk inlets Strap-Onstraight with stainless steelclamp. Designed to fit milklines from 1.5” to 4.0”.
Stainless Steel Gooseneck’s.
Stainless steel gooseneck /cane for older Sta-Rite/Universal Vac-Savmilk valves. Slide base is 1 7/8” x 1 7/8”. Fits 5/8” milk hose.
213107 Universal Vac-Sav Cane/gooseneck
Blue Plastic milk Valve
Gooseneck/canes fit all the slideson blue plastic and stainless steelmilk valves.
Vac-Sav Stainless Steel Gooseneck’s.
Strap-on Milk Inlets
Part No. Description
213108 Gooseneck Standard 90D 5/8”
213109 Gooseneck Reverse 90D 5/8”
-
21
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
21
MGM Company, Inc. WWW.MGMCOMPANY.COM
242006 Valve Plastic 5/8”
245104 Tabbed Gasket
245110 O-Ring
A-242010 Window for IBA & BouMaticbarrel claws. 2 3/16” ID x 2 7/16” OD x1/4”.B-242011 Claw gasket 2 3/16” x 2 7/16”x1.4” Fits BouMatic & IBA. (Gray)B-242012 Flat claw gasket 2 11/16”x 3”.For Germania style claw.
245100 Delrin 5/8”
245101 Delrin Vented 5/8”
245107 Delrin 3/4”
245108 Delrin 3/4” vented
245103 O-ring for 5/8”
245104 Tabbed gasket for 5/8”
Delrin Valve White Plastic Valve
Standard Fresh Cow Lid
Fits all stainless steel and poly buckets.With rap around gasket.
241300 Lid w/Gasket for 5/8” milkhose.
241302 Gasket only
Squeeze Clamp (Snap/pinch Clamp)
241117 For 5/8” ID Hose
241118 For 3/4” ID Hose
All stainless steel construction.
CLAWS - SHUT OFFS - FRESH COW - MILKER SHELLS
Stainless Steel Valve Parts (Tesa Valve)
242008 O-Ring (top)
242009 Tabbed Gasket (bottom)
242019 Seal Kit w/O-ring & gasket
Stainless Steel Shells
241240 DeLaval Rolled Edge 06Shell.
242100 Tapered stainlessSurge style with satin finish.
242105 Standard Bou-Matic stainless shell w/ribbed top.
AIR FORKS
TYPE 304- ELECTRO POLISHED & PLASTIC
241252 A Single – Single puls 3/8” OD x 1/4” ID
241247 B Twin — Front to Back 3/8” OD x 1/4” ID
241250 B Twin—Front to Back 5/16” OD x 9/32” ID
241264 C Twin Plastic -Front to Back 3/8” OD x 1/4” ID
241254 D Twin—Germania Style 5/16” OD x 9/32” ID
241256 D Twin —Germania Style 3/8” OD x 1.4” ID
241248 E Twin — Side to Side 3/8” OD x 1/4” ID
Air Forks Stainless steel & Plastic.
-
22
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
22
MGM Company, Inc. WWW.MGMCOMPANY.COM
COMPLETE RECEIVER GROUPS
MGM Company can offer complete milk receiver assemblies to meet your customers needs. We also offer a complete list of component parts andassemblies to keep the milk receiver system maintained in top working order. Listed below is a system installation and spare parts ordering guidefor all of our parts and components. Call us for your complete receiver assemblies.
Ref. No. Part No. Description
1 Specify Motor for Pump
2 Specify Flapper Check Valve Location
3 152915 V-Insert Clamp 1.5”
3 181115 Pipeline Gasket 1.5”
4 Specify Receiver Stand
5 246047 Leg Set (3) for Stand
6 Specify Liquid level Control
7 Specify Custom Receiver Vessel
8 276004 Gasket for 18” diameter receiver cover
8 10026 Gasket for 26” diameter receiver cover
9 276065 3 Point Probe Assembly
Ref. No. Part No. Description
10 276003 Receiver Cover for 18” diameter receiver
10 10025 Receiver Cover For 26” diameter receiver
11 Specify Milk Inlet Custom
12 Specify J-Bend Trap Connector
12 Specify U-Bend Trap Connector
13 152930 V-insert Clamp 3”
13 181130 Pipe Line Gasket 3”
14 Specify Custom Vacuum Inlet
15 Specify Moisture Trap Complete
16 Specify Milk Pump Complete
301264 Vacuum Drain Valve w/Elbow (not Shown)
Receiver Parts Breakout
-
23
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
23
MGM Company, Inc. WWW.MGMCOMPANY.COM
CUSTOM RECEIVER VESSELS
Milk Receiver Order Form. (Please photocopy and use this form when ordering custom receivers.Stainless steel receivers may be ordered with inlets welded at specific heights and locations on the receiver. Using the top view below, mark themilk and vacuum connections locations. For fabrication purposes the milk pump connection is always at the 90 degree location. On the side view,draw in the height of the milk inlets using the center line of the milk pump connection as a starting location. Please allow for 4 weeks to fabricatethe receiver plus shipping time to your location.
1. Size: Check one of the options listed.
Diameter X Height Capacity Milk Pump Connection
14” x 18” 10 Gallon 1.5” Ferruled
18” x18” 16 Gallon 1.5” Ferruled
18” x 24” 24 Gallon 1.5” Ferruled
Diameter X Height Capacity Milk Pump Connection
26” x 24” 50 Gallon 1.5” Ferruled
26” x 24” 50 Gallon 2.0” Ferruled
2. Milk & Vacuum inlet options. Check size and number of inlets.
Size Connection Option
2.0” Clamp Straight
2.0” Weld Straight
2.0” Clamp 45 Degree
2.5” Clamp Straight
3.0” Clamp Straight
Size Connection Option
3.0” Weld Straight
3.0” Clamp 45 Degree
4.0” Clamp Straight
4.0” Weld Straight
4.0” Clamp 45 Degree
Order Date:___________________ PO #:__________________ Expected Delivery Date:___________________________________________
Account Name:________________________________ Account Number:______________ Contact:_________________________________
Street Address:_________________________________ City:__________ _____State/Prov:___________ Zip/Postal Code_________________
Signature (Required)____________________________ Best way to contact if questions:___________________________________________(phone, fax, email)
Receivers do not come with covers and gaskets. Please see page 26 for cover and gasket options.
-
24
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
24
MGM Company, Inc. WWW.MGMCOMPANY.COM
Stainless steel horizontal traps come with a see through Lexan cover, gasket andplastic float ball. 12” diameter x 18” long. (8 gallon Capacity)
276006 3.0” x 3.0” jumbo Trap Complete, clamp x male NPT276008 3.0” x 3.0” jumbo Trap Complete, clamp x clamp.276009 4.0” x 4.0” jumbo Trap Complete, clamp x male NPT276012 4.0” x 4.0” jumbo Trap Complete, clamp x clamp.276015 Trap Gasket only 11.0”ID x 13.0”OD.275072 Replacement Lid w/gasket & Stainless Hanger Tab
Stainless steel vertical traps parts.
276052 Complete 24 QT. Stainless Steel Trap with 3.0” X 3.0” clamp connections.276056 Replacement lid w/3.0” holes for 12 Qt. Trap.276055 Replacement float ball only for 2.0” trap.276054 Gasket for 24 Quart Vertical Trap 8.5” ID x 9.5” OD.276071 Duck Bill Drain276080 Rubber Cover for 3.0” White Ripple Plastic Trap. ( For clean out inlet)
U-Bend are used to connect horizontal traps to receiver.
276040 3.0” x 20.0” U-Bend with clamp x clamp ends276045 4.0” x 30.5” U-Bend with clamp x clamp ends.
J-Bend are used to connect vertical trap to receiver.
276049 2.0” J-Bend w/ clamp x male NPT ends.276048 3.0” J-Bend w/ clamp x male NPY ends.276047 3.0” J- Bend w/ clamp x clamp ends (SPECIAL).
276068 Floor Stand Complete for 18” diameter receivers w/out legs.276070 Floor Stand Complete for 26” diameter receivers w/out legs.246074 Leg set for floor stands.
Replacement Trap Float Balls276055 2.375” Plastic Ball for 2.0” traps.276017 3.50” Plastic Ball276018 4.25” Plastic ball for 3.0” traps.276024 4.75” Plastic Ball for 4.0” traps.276020 4.0” Stainless Steel Ball w/weighted side.276025 5.0” Stainless Steel Ball w/weighted side.276030 6.0” Plastic Ball
RECEIVER & VACUUM LINE COMPONENTS
Moisture Trap Balls
Jumbo Horizontal Moisture Traps
Vertical Moisture Traps & Parts
Floor Mount Receiver Stands
J-Bend Connections for Receivers
U-Bend Connections for Receivers
Moisture trap balls are rotational molded,from FDA approved poly virgin material.Balls weight about 1 to 1.2 lbs. depend-ing on the ball diameter.
-
25
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
25
MGM Company, Inc. WWW.MGMCOMPANY.COM
301264 Drain elbow 1.5” x 90D kit. Includes elbow w/7/16” nipple and vacuumoperated 4” valve with plastic drain tube.241202 Diaphragm only 4.0”241204 Diaphragm only for small drain valve 2.75”241203 Tuber 3/8”ID x 1/2” OD for drain valve271205 Vacuum operated 4.0” drain valve only
271208 Valve seat Stainless , for 1.50” connection.271211 Valve seat Stainless, for 2.0” connection.275069 Flapper Valve DL Standard (thick) 1.5”271207 Flapper Valve BM & TC 1.5”271209 Flapper Valve TC 2.0”276075 Flapper Valve Surge 1.5”275070 Flapper Valve Westfalia 1.5”
276001 Clear Acrylic Cover w/1.5” hole for 26” diameter Receiver276054 Gasket for 26” diameter receiver (8.5” ID x 9.5” OD)276003 Clear Acrylic Cover & Gasket w/hole for 18” diameter receiver276004 Gasket for 18” diameter receiver (6.375” x 7.875”)276100 Clear Cover w/out hole for 18” diameter receiver276101 Clear Cover w/out hole for 26” diameter receiver
Milk Pump Stainless Steel CheckValve Seats & Flappers.
Vacuum Drain Valve
Receiver Covers & Gaskets
MILK PUMPS
Classic milk pumps are all stainless steel. Pumps are set to run using a 3450 RPM motors with akeyed shaft. (56C Frame Motors.)
27487 Pump assembly is can be used on a 3/4hp to 1hp motor. Pump has 1.5” clamp connection inand out and has a 3.0” 4 blade impeller that is rated to pump 45 gpm with 32 feet of head.
27488 Pump assembly is set up for a 1.5hp to 2.0 hp motor. Pump has 1.5” clamp connection in andout and has a 3.625” 4 blade impeller that is rated to pump 60 gpm at 45 feet of head. Using a1.5hp motor.276072 Classic Milk II Pump 3 piece seal kit
RECEIVER COMPONENTs
Thomsen Milk Pumps have a well-earned place in the dairy industry. Thomsen pumps installedon a milk receiver system are under vacuum and have a external seal assembly. This handy costsaving kit is for three horse power models, # 4, #5 & #6. Each kit contains: rotary seal assembly,ceramic seal, housing O-rings for models #4, #5, & #6 and impeller clip.
109222 Thomsen #4, 5 & 6, Milk Pump external seal kit
LC THOMPSON MILK PUMP REPAIR KITS
-
26
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
26
MGM Company, Inc. WWW.MGMCOMPANY.COM
LIQUID LEVEL CONTROL
Universal use Liquid Level Control with Three Point Probe.Features: Wash/Manual Switch Dual Voltage Switch 110/220 volt NEMA 4 rated water resistance plastic enclosure Comes With Factory Wiring Suitable for Customer Wiring Complete Wiring Diagram Included with each unit. Controls Motors up to 1.5 horse power. Stainless steel probes can be easily cut to fit smaller receivers at the job site. Long Probes are 23” long, short probe is 19”long, made of approved stainless steel.
Part No. Description
276059 Complete System w/3 point probe fits 1.5” hole in receiver cover (for 60Hz 120V electrical requirements)
276060 Complete System w/3point probe, fits 1.5” hole in receiver cover (specifyelectrical requirements for 50hz 220V overseas use)
276062 Replacement PC Board for 110V control.
276063 Replacement Cap and Cord assembly.
276064 Replacement 1.5” Nylon 3 point probe holder for receiver cover
276066 Control Box only less probe assembly for 110V.
276067 Complete 2.0” - 3 Point assembly w/ferrule connection
276069 Replacement rubber boot for probe assembly
276065 Complete 1.5” - 3 point probe assembly. (Probe, cord, cap & holder)
Liquid Level Control
-
27
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
27
MGM Company, Inc. WWW.MGMCOMPANY.COM
MILK FILTRATION
MGM is the premier supplier of the original side exit milk filter frame. All frames are made of 304 stainless steeland polished inside and out to a beautiful approved finish. The large milk filter chamber and surface area of thefilter insert holder offers better milk filtration, less milk pump back pressure and less sediment blow by.
KEY FEATURESEasier filter change. No need to break the line.
Sizes to fit all types of systems.Built in quality. Each frame is pressure tested before shipment.
All spare parts are available.Made in the USA.
-
28
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
28
MGM Company, Inc. WWW.MGMCOMPANY.COM
Part No. Closed End StylesDiameter x Length x Ports
1 Body Only 2 Insert only
121502 4 7/8” x 17” x 1.5” 121501 121503
121508 4 7/8” x 33” x 1.5” 121507 121509
121517 4 7/8” x 33“ x 2.0” 121514 121509
121518 4 7/8” x 33” x 2.5” NA 121509
Part No. Open End StylesDiameter x Length x Ports
1 Body Only 2 Insert only
121500 4 7/8” x 17” x 1.5” 121501 121503
121506 4 7/8” x 33” x 1.5” 121507 121510
121512 4 7/8” x 33 “x 2.0” 121514 121510
Part No. Ref. No Description
11140 3 4” Clamp Gasket
121530 4 Top Seal Gasket (white). For 17” & 33” filter.
121531 5 Two Tabbed O-ring. Fir 17” & 33” filter.
152140 6 Heavy Duty Clamp 4.0”.
121532 7 End Plug ( 3 Ear type)
Spare parts list for large capacity milk filter frames. Note end plug is only required onopen end models.
MILK FILTERS / STRAINERS
This original large capacity side exit milk filter frame has a closed endthat eliminates the rubber end plug. This feature allows for easier filterchanging and less sediment blow by. Uses filter socks and only one rub-ber tabbed O-ring to hold the filter on the stainless steel frame. Eachframe is precision made and tested before shipment. Comes completewith body, heavy duty clamp, insert and gaskets. NOTE: “copy cat”frame parts are not always interchangeable use only original MGMreplacement parts.
The original large capacity open end side exit milk filter frame with rub-ber end plug. Other copy cat frames parts do not interchange.
MAINTAINENCE: All rubber componentsshould be inspected and replaced fre-quently.
SMALLER CAPACITY MILK FILTER FRAMES
121533 Side Exit Filter 2.25” x 24” x 1.5” Closed End
121522 Side Exit Filter 3” x 23.5” x 1.5” Closed End
Part No. Description
121520 Body only for 3.0 X23.5” filter
121536 Top white Seal for 2.25” x 24” Side Exit Filter.
121537 Filter hold O-Ring for 2.5 x 24” filter.
121538 Top white seal only for 3’ x 23” filter side exit.
121534 Filter hold O-ring for 3” x 23” filter.
121535 O-Ring For Rodgers 2.5” filter frame.
-
29
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
29
MGM Company, Inc. WWW.MGMCOMPANY.COM
MGM offers a complete line of vacuum line components in low cost, attractive, easy to use White PVC
Pre Air Filters for 1 or 2 Pump Systems(100% stainless filters inside)
White PVC Pipe 1.5” through 8”
Complete line of White PVC Fittings 1” through 8”
Metric Adapters 3” x 75mm & 4” x 110mmOthers sizes on request
Vacuum Tanks 20 to 100+ Gallon Capacity
Complete line of Valterra® Gate Valves in Inch and Metric sizes1.5” to 8”
50mm to 160mm
Anti Reverse Valves / Check Valves
White PVCIntegrated Vacuum Line System
VACUUM SYTEM COMPONENTS
-
30
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
30
MGM Company, Inc. WWW.MGMCOMPANY.COM
MGM has been the pioneer in the development and marketing of PVC Vacuum Tanks and Pre Air Filters. We are the exclusive agent for The Har-rington Corporation ( HARCO ).the premier manufacturer of PVC tanks. All MGM PVC tanks are manufactured from specially formulated resincompounds to assure uniform color, strength and fit of all inlets and end caps. All MGM tanks feature domed end caps for added strength . Precisequality control standards guarantee vertical inlets are in line to a tolerance of +/- 1º. We have an extensive line of standard sizes and configura-tions from in 12 to 15 and 18” Diameter with a wide selection of available fittings, mounting, drains filters & inserts. The fol lowing pages show someof the more popular sizes and configurations. The complete list of tanks sizes and configurations is very extensive. Please e-mail or call us di-rectly for questions about the right tank for your system. Tanks can also be ordered with removable lids and with float ball / shut off options. Mosttanks include floor stands or mounting straps and extra large 1.5” flapper drains.
PVC VACUUM TANKS
TANK VOLUME IN GALLONS & LITERS
Tank Diameter Tank Height Volume in US Gallons
15” 35” 27
15” 42” 32
15 59” 45
15 120” 92
18 120” 110
Volume in Liters
101
121
170
347
417
Proper sizing of tanks is an important consideration when designing a vacuum system. MGM does not install vacuum systems and therefore can-not make recommendations regarding the proper sizing or proper installation of Tanks . The Dairy System Manufacturer (OEM’s) and their certi-fied dealers are the best source for this information and are responsible for proper sizing and installation
Formulas used:Tank Volume: R2 x Height = cu/inch
Gallon Conversion: Cu Inch x 0.004329 = US GallonsGallons to Liters:U.S. Gallons x 3.783 = Liters
-
31
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
31
MGM Company, Inc. WWW.MGMCOMPANY.COM
EXAMPLES OF VERTICAL PVC VACUUM TANKS
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
27/ 100 3” 5 396020 60-3
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
27/ 100 3” 5 396023 60-6
Capacity Gal /Liter
Inlet Size # ofInlets
MGM # HARCO #
36 /138 2 ea 3” & 3 ea 4” 5 396109 66-109
36 / 138 3” 5 396025 60-8
EXAMPLE OF CUSTOM TANK - QUOTED UPON REQUEST
HARCO MODEL66-87
-
32
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
32
MGM Company, Inc. WWW.MGMCOMPANY.COM
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
27/ 100 3” 6 396024 60-7
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
45 / 172 3” 6 396023 60-6
45 / 172 4” 6 60-57
EXAMPLES OF HOZRIZONTAL PVC VACUUM TANKS
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
92 / 347 2 ea. 6” & 4-ea. 4”” 6 396674 66-74
92 / 347 4” 8 60-17
92 / 347 6” 6 60-71
-
33
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
33
MGM Company, Inc. WWW.MGMCOMPANY.COM
EXAMPLES OF REMOVEABLE LID PVC VACUUM TANKS
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
45 / 172 3” 6 396014 60-135
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
41 /156 3” 2 396013 60-13
Capacity Gal /Liter Inlet Size # of Inlets MGM # HARCO #
27 / 101 3” 6 396016 60-133
Some countries and perhaps some regions of the US require , removable end caps on the PVC Vacuum Tanks. This feature allows for cleaningand inspection of the interior of the tanks . It also aids in removing any debris that may accumulate in the tanks. MGM offers a wide variety of tankswith removable lids. A few of the more popular examples are shown below.
-
34
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
34
MGM Company, Inc. WWW.MGMCOMPANY.COM
396026 15” End cap w/1.5” outlet
394058 15” End cap Enlarged for Tanks with removable end cap.
394050 1.5” Drain Valve
394048 Gasket, for 15” Tanks with removable end caps.
396030 Tank Wall Bracket (Set of 2)
396051 15” End Cap w/ 3 x 3” inlets (For standard tanks)
396032 15” End Cap Blank (no inlets) (For standard tanks)
276017 Replacement Float Ball for 3” Tank Outlet
276030 Replacement Float Ball for 4” Tank Outlet
61-9
931-73
931-66
931-15
61-3
931-72
Part No. Description Model No.
396052 15” End Cap w/ 1 x 3” inlet (For standard tanks) 61-12
369034 Leg Stand for Vertical Tanks 931-76
396027 6.0” X 23.75” PVC Tank for Portable Milkers.
EXAMPLES OF PVC VACUUM TANKS FLOAT BALL SHUT OFF
Model 60-243
Spare Parts for PVC Vacuum Tanks
Model 60-242
-
35
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
35
MGM Company, Inc. WWW.MGMCOMPANY.COM
PVC PRE-AIR FILTERS
Filtered air is recommended for all vacuum pumps. Pre-Air Filter gives extra protection for vacuum pumps. Designed to filter out moisture and airborne contaminated debris prior to entering the vacuum pump.The units are constructed of non-corrosive white PVC with washable stainless steel filters.The size of the units coupled with the high filtration area offered by the insert helps reduce line fluctuation and reduces build-up on lobes and helpsextend vacuum pump and motor life.The improved removable lid makes it easy to inspected the filter screen on a regular interval. It should be cleaned or replaced as needed.Units come complete with floor stand, self draining flapper drain valve for single or dual vacuum pump systems. A PVC plug is included with dou-ble exit models to seal off the unneeded outlet. Custom configurations models are available.
394045 Gasket 12” U-Shaped
394050 Drain Valve w/flapper 1.5” NPT
394057 Lid PVC 12”
395001 Filter SS 18.375” x 23.25”
395005 Filter SS 11.5” x 18.5” (3 screen layers) comes in all cur-rent models
395007 Filter SS 11.0” x 18.375” x.375”
395009 Filter W/ PVC Frame 11.5” x 18.5” w/304 SS screen. (canbe trimmed to fit other filters)
395025 Baffle only
931-14
931-66
931-71
931-79
931-97
931-97A
931-99
931-69
Part No. Model Size In x Out
396022 60-4 Double 3.0” in x 2 x 3.0” out
396000 60-50 Single 4.0” in x 4.0” out
396050 60-110 Double 4.0’ in x 2 x 4.0” out
Complete Pre-Air Vacuum FiltersPre-Air Filter Spare Parts
Standard 3” & 4” filters with single & dual vacuum pump connections.
Part No. Model Size In & Out
396051 60-17 Single 6.0” in x 6.0” out
Standard 6.0” Vertical vacuum pump filters.
Part No. Model Size In & Out (15” x 39”)
396055 66-121 6.0” in x 6.0” out
Commercial duty horizontal pre air filter with 6.0” connec-tions in and out and with a 6.0” hinged back flow flappervalve.
395008 931-83 Filter SS 13.375” x 19.5” ( 2– required)
394055 931-701 Hinged Flapper 6.0”
Spare Parts for Commercial Pre air Filter
-
36
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
36
MGM Company, Inc. WWW.MGMCOMPANY.COM
VACUUM LINE GATE VALVES
WHITE PVC VALVES
BLACK ABS VALVES
Part # Size Description Paddle Ctn/Qty
368101 50mm Slip x Slip Plastic 26
368201 63mm Slip x Slip Plastic 16
368375 75mm Slip x Slip Plastic 15
368301 90mm Slip x Slip Plastic 12
368401 110mm Slip x Slip Stainless Steel 6
368402 110mm Slip x Slip w/ Pneumatic Cylinder Stainless Steel 6
368601 160mm Slip x Slip Stainless Steel 1
368910 250mm Slip x Slip Stainless Steel 1
368912 315mm Slip x Slip Stainless Steel 1
368801 200mm Slip x Slip Stainless Steel 1
Part # Size Description Paddle Ctn/Qty
367101 1.5’ Slip X Slip Plastic 36
367201 2.0” Slip X Slip Plastic 20
367301 3.0” Slip X Slip Plastic 18
Part # Size Description Paddle Ctn/Qty
366101 1.5” Slip X Slip Plastic 30
366201 2.0” Slip X Slip Plastic 20
366301 3.0” Slip X Slip Plastic 12
364301 3.0” Slip X Slip w/stainless steel paddle Stainless Steel 12
361119 3.0” Female w/Slip Flange Plastic 12
366401 4.0” Slip X Slip Stainless Steel 6
366402 4.0” Slip X Slip Gray valve. Stainless Steel 6
366601 6.0” Slip X Slip Stainless Steel 1
366801 8.0” Slip X Slip Stainless Steel 1
367311 3.0” Slip X Tank Flange Plastic 18
GRAY METRIC VALVES
SPARE PARTS
361107 2.0” Valve Seat
361102 3.0” Valve Seat
361118 4.0” Valve Seat
361122 6.0” & 8.0” Valve Seat
361109 Plastic Handle for 1.5” to 3.0” Vale
361110 Metal Handle for 4.0” to 8.0” Valve
361003 3.0” Valve Seat & Hardware (Bagged)
361115 3” Replacement Body
-
37
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
37
MGM Company, Inc. WWW.MGMCOMPANY.COM
PVC GATE VALVES FOR VACUUM LINES
FEATURES
APPLICATIONSINEXPENSIVE VALVES FOR INDUSTRIAL, AGRICULTURA AND COMMERCIAL MARKETS. THIS IS AN IDEAL VALE FORQUICK SHUT OFFIN LOW PRESSURE VACUUM LINES. ALSO WELL SUITED AS A DRAIN FOR TANKS.
1.5” White 1.50” Black 2.0” White 2.0” Black 3.0” White 3.0” Black 4.0” 6.0” & 8.0”
HUBS PVC ABS PVC ABS PVC ABS PVC PVC
BODY PVC ABS PVC ABS PVC ABS PVC PVC
SHAFT STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS
PADDLE POLYPRO POLYPRO POLYPRO POLYPRO POLYPRO POLYPRO STAINLESS STAINLESS
HANDLE PLASTIC PLASTIC PLASTIC PLASTIC PLASTIC PLASTIC ALUMINUM STAINLESS
SEALS SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE SANTOPRENE
PSI 45 45 40 40 30 30 20 10
MATERIALS AND SPECIFICATIONS
SIZE A B C D E F
1.5” PVC 6.50” 8.625” 2.875” 2.375” 3.9375” 3.375”
1.5”ABS 6.50” 8.625” 2.875” 2.375” 3.9375” 2.875”
2.0” PVDC 7.50” 10.25” 3.25” 2.75” 4.50” 3.125”
2.0” ABS 7.50” 10.25” 3.25” 2.75” 4.50” 3.50”
3.0” ABS/PVC 9.25” 13.0” 2.375” 3.9375” 5.1875” 4.50”
4.0” PVC 13.25” 18.0” 6.625” 5.0” 7.4375” 5.1875”
6.0” PVC 22.375” 31.125” 11.0” 7.25” 13.25” 11.125”
8.0” PVC 22.375” 31.125” 11.0” 9.3125” 12.1875” 13.75”
DIMENSIONS (SLIP X SLIP) VALVES
SOCKET DEPTH
1.5” 2.0” 3.0” 4.0” 6.0” 8.0”
.07” .75” 1.60” N/A N/A N/A
1.25” 1.60” 1.80” 1.70” 4.375” 5.67”
SIZE
ABS
PVC
A NOTE ABOUT CEMENTS
FITTING PIPE CEMENT RECOMENDATION
ABS PVC USE IPS # 793 OR EQUIVALENT
ABS ABS USE IPS # 771 OR EQUIVALENT
PVC ABS USE IPS # 793 OR EQUIVALENT
PVC PVC USE IPS # 705 OR EQUIVALENT
-
38
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
38
MGM Company, Inc. WWW.MGMCOMPANY.COM
WHITE PVC VACUUM LINE PIPE
White PVC Pipe is the perfect material for vacuum lines. Clean appearance, low cost, ease of use and the wide variety ofcompatible white fittings make for a long lasting and good looking installation. MGM can be your single supply sourcefor all components needed for a complete white PVC vacuum line.
Made of the same material as the Pre Air Filters , Vacuum Tanks and compatible gate valves
Size Lengths Per Pallet(10 ft. or 20 ft/6 m.)
Feet Per Pallet10 ft. / 20ft/6 m
Meters Per Pallet10ft. / 20 ft/6 m
Pallet Weight10 ft. / 20 ft/6 m
1.5” 158 1580 / 3160 481.5 / 963 1580 lb. / 3160 lb.2.0” 210 2100 / 4200 640 / 1280 1050 lb. / 2100 lb.3.0” 92 920 / 1840 280.5 / 561 920 lb. / 1840lb.4.0” 57 570 / 1140 174 / 348 570 lb. / 1140 lb.6.0” 24 240 / 480 72 / 146 240 lb. / 480 lb.
PIPE SIZES AVAILABLE UP TO 18” DIAMETER
Size 20 ft/6 mLength #
10 ft Length # Per Meter # Per Foot #
1.5” 331018 331017 331016 3310152.0” 331023 331022 331021 331020
3.0” 331033 331032 331031 331030
4.0” 331043 331042 331041 331040
6.0” 661063 331062 331061 331060
-
39
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
39
MGM Company, Inc. WWW.MGMCOMPANY.COM
5100015 1.5” 1005100020 2.0” 1005100030 3.0” 605100040 4.0” 25
Part # Size Box Qty
White PVC Coupling
5102251 2” X 1.5” 25
5102338 3” X 2” 205102422 4” X 3” 105102532 6” X 4” 4
Part # Size Box Qty
5102337 3” X 1.5” 25
Part # Size Box Qty5103020 2.0” 25
5101015 1.5” 1005101020 2.0” 1005101030 3.0” 305101040 4.0” 10
Part # Size Box Qty
White PVC Female Adapter
White PVC Reducer
White PVC Male Adapter
Part # Size Box Qty5105020 2.0” 505105030 3.0” 255105040 4.0” 10
White PVC Cleanout Adapter
COMMON WHITE PVC VACUUM LINE FITTINGS
-
40
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
40
MGM Company, Inc. WWW.MGMCOMPANY.COM
White PVC Raised Plug W/Nut
White PVC Flush Bushing
Part # Size Box Qty5106030 3.0” 255106040 4.0” 30
Part # Size Box Qty5107251 2” x 1.5” 505107338 3” x 2” 305107420 4” x 2” 305107422 4” x 3” 30
5107532 6” x 4” 10
White PVC Flush BushingPart # Size Box Qty
5108251 2” x1.5” 50
White PVC Male Adapter Part # Size Box Qty5109020 2.0” 505109030 3.0” 255109040 4.0” 25
Part # Size Box Qty5112020 2.0” 255112030 3.0” 255112040 4.0” 105112060 6.0” 10
White PVC Clean Out AdapterWith Plug
COMMON WHITE PVC VACUUM LINE FITTINGS
-
41
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
41
MGM Company, Inc. WWW.MGMCOMPANY.COM
White PVC 90° Bend
Part # Size Box Qty5300020 2.0” 505300030 3.0” 255300040 4.0” 10
5300060 6.0” 5
White PVC 90° Long Sweep Bend
Part # Size Box Qty5304020 2.0” 255304030 3.0” 10
5304040 4.0” 5
Part # Size Box Qty5321015 1.5’ 1005321020 2.0” 50
5321030 3.0” 20
5321040 4.0” 10
5321060 6.0” 3
White PVC 45° Bend
White PVC Double 90° BendPart # Size Box Qty
5327020 2.0” 255327030 3.0” 10
Part # Size Box Qty5400015 1.5” 1005400020 2.0” 355400030 3.0” 30
5400040 4.0” 5
5400060 6.0” 6
White PVC Sweep Tee
COMMON WHITE PVC VACUUM LINE FITTINGS
-
42
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
42
MGM Company, Inc. WWW.MGMCOMPANY.COM
White PVC Vent Tee
Part # Size Box Qty5441020 2.0” 255441030 3.0” 10
5441040 4.0” 5
5441060 6.0” 4
White PVC WYE
Part # Size Box Qty5600020 2.0” 255600030 3.0” 25
5600040 4.0” 5
5600060 6.0” 4
White PVC Sch 40 tee
Part # Size Box Qty4401005 .05” 504401020 2.0” 25
4401030 3.0” 10
4401040 4.0” 5
4401060 6.0” 4
White Sched 40 Reduce TeeSlip x Slip x FPT
Part # Size Box Qty4402247 2” x 2” x .05” 104402249 2” x 2” x 1” 10
4402335 3” x 3” x 1” 10
White PVC Metric AdapterPart # Size Box Qty
4403750 3” x 75 mm 104403900 3” x 90 mm 104404110 4” x 110mm 10
COMMON WHITE PVC VACUUM LINE FITTINGS
-
43
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
43
MGM Company, Inc. WWW.MGMCOMPANY.COM
Sched 40 white PVC Reducing90° Bend
Part # Size Box Qty
4406005 .05” 504406015 1.5” 25
Sched 40 White PVC 45 ° Bend Part # Size Box Qty
4417005 .05” 50
Sched 40 White PVC CouplingPart # Size Box Qty
4429005 .05” 504429015 1.5” 25
Sched 40 White PVC MaleAdapter
Part # Size Box Qty
4436020 2.0” 254436030 3.0” 104436040 4.0” 5
Sched 40 White PVC ReducerBushing
Part # Size Box Qty
4437250 2” x 1.25” 254437338 3” x 2” 104437422 4” x 3” 5
Sched 40 White PVC ReducerBushing
Part # Size Box Qty
4438249 2” x 1” 104438250 2” X 1.25” 104438251 2” X 1.5” 10
4438247 2” x .50” 10
COMMON WHITE PVC VACUUM LINE FITTINGS
-
44
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
44
MGM Company, Inc. WWW.MGMCOMPANY.COM
Sched 40 White PVC ThreadedBushing
Part # Size Box Qty4439073 1/2” X 3/8” 50
Sched 40 White PVC CapPart # Size Box Qty
4447015 1.5” 254447020 2.0” 254447030 3.0” 104447040 4.0” 54447060 6.0” 5
Sched 40 White PVC Plug
Part # Size Box Qty
4449015 1.5” 254449020 2.0” 104449030 3.0” 104449040 4.0” 5
COMMON WHITE PVC VACUUM LINE FITTINGS
PVC check valveBackflow swing check valve.
Long Lasting.Heavy duty flapper with neoprene
O-ring seal.Horizontal installation.
Line Size Valve Complete Flapper w/O-ring
3.0” 223283 223288
4.0” 223284 223289
6.0” 223286 223290
Lid w/O-ring
223292
223293
223294
2.0” 223282 223287 223291
1.5” 223281 223287 223291
Inline swing style PVC check valve will help keep vacuum pumps fromrunning backward and helps prevent equipment damage, at shut off time.Designed to be mounted horizontal in the vacuum line on the intake side ofthe vacuum pump. Heavy duty flapper with neoprene O-ring seal.
-
45
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
45
MGM Company, Inc. WWW.MGMCOMPANY.COM
301200 Fresh Air Filter Complete Assembly
301503 Replacement filter for fresh air and bottomair filter for models 350 & 500 Sentinel vacuum
Keeps pulsators clean and working prop-erly.Attaches to 3.0” PVC. Keeps dust andinsects out of vacuum line. One filter kitrecommended per 10 pulsators.
Fresh Air Vacuum Line Filter Kits
361055 Anti-reversing valve
Keeps the vacuum system safe. Keeps the pump from turning back-wards when system is shut down. Keeps foreign material from enter-ing the vacuum exhaust pipe. For 1.5 and 2.0” diameter exhaustpipes.
Anti-Reversing Check Valve
VACUUM COMPONENTS
Drip Drain Black Plastic (Vacuum Drain Valve)
363000 Drip Drain black plastic w/.50threads.
Drip Drain Brass (Vacuum Drain Valve)
363005 Drip Drain brass w/.50 threads
Delaval Lid to Interpuls Adaptor
241100 Bucket Lid Adaptor for Hyrdopuls 100241114 Bottom gasket for Hydropuls adaptor241113 Check Valve for Hydropuls adaptor.241130 Adjusting hand wheel for Delaval lid
241128 Adaptor for Delaval lid.241114 Bottom gasket for adaptor241115 Check Valve
241129 Interpuls to DV 300 adaptor
Delaval Hydropuls Lid Adaptor
Universal to Interpuls Adapter
361137 Interpuls to Universal adapter.
Delaval DV300 to Interpuls Adaptor
.363006 Drip Drain black plastic w/3/8”threads
-
46
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
46
MGM Company, Inc. WWW.MGMCOMPANY.COM
PULSATORS & STALL COCKS
24 volt BouMatic style Pulsator has improved power consumption and exhaustports with good quality electrical contacts.
305000 Stanchion Mount Pulsator 24305001 Parlor Mount Pulsator 24V
Electric Pulsator Spare PartsPart No. Ref. Description
305020 1 Nipple O-Ring
305022 2 Coil Base O-Ring 1.625”
305023 3 Piston Base Cap
305024 4 Top Insert for Piston
305025 5 Nipple Protector
305026 6 Clean-Out Plug for Side
305027 9 Piston only
305028 11 White Base Assy. Stanchion
305029 10 Base Assy. Parlor Mount
305030 12 Contact Spring
305033 21 Coil only Red 24 volt
305055 Pulsator Repair kit
305031 20 Nipple/Suction tube Stainless Steel
Strap-on Stall CockGood quality, made of die-cast metal. Fits any size of PVC or stainless steeltubing. Fits, Strangko, BouMatic and Schlueter and Westfalia pulsators.305040 Strap-on Stall cock complete.305041 Strap-on Stall cock complete. w/64 -114mm clamp.305046 Stall cock repair kit.305043 Clamp only for 64 to 114mm pipe.
Thread-on Stall CockGood quality, made of die-cast metal. Fits any size of PVC or stainless steeltubing. Fits, Strangko, BouMatic and Schlueter and Westfalia pulsators.305042 Thread-on Stall cock complete305046 Stall cock repair kit.
Manual Stall CockPlated metal with tapered hose connection with manual on/ off lever andNPT threads.305048 Angled 90D Stall cock w/ .375” threaded connection305045 Straight Stall cock w/.375threaded connection363002 Angled 90D Stall cock w/ .50” threaded connection363004 Straight Stall cock w/.50”threaded connection
Strap-on Stall Cock
Thread-on Stall Cock
Manual Operated Stall Cock
241180 Pulsator repair kit for older Surge Belly Milker Pail System.Kit contains: 2 cylinder gaskets, 4 flanged expanders, 4 piston leathers, 1 O-ring, and 1 rubber tip.
303053 Pulsator repair kit for Surge Alternating Pulsator. Contains: 2 coilbase O-rings & 2 pistons w/rubber cap and base.
Repair Kit for Surge Vacuum & Electric Pulsator
305055 Repair kit includes: 2 pistons w/caps, 2 coil O-rings & 1 nipple gasket.
Repair Kiit contains: Ball, O-ring, 2-sleeves & contacts, 6 washers, 3 #6screws, 2 flat nylon washers.
-
47
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
47
MGM Company, Inc. WWW.MGMCOMPANY.COM
WASH SINKS
Single Compartment, Regular Wash Sink 12 .25” Deep , 20.5” Wide
Deep Wash Sink, Single15.25” Deep , 22.0” wide
Part No. Model No. Gallons Length (inches)
420018 518 14 20
420022 522 18 24
420029 529 23 31
420036 536 29 38
420049 549 39 51.25
420060 560 48 60
420072 572 58 72
Part No. Model No. Gallons Length (inches)
421818 51818 14/14 40 (18/18)
422222 52222 18/18 47 (22/22)
422229 52229 18/23 54 (22/29)
422929 52929 23/23 61 (29/29)
422236 52236 18/29 61 (22/36)
422249 52249 18/39 74 (22/49)
420615* 736015 15/60 81 (18/61.5)
Part No. Model No. Gallons Length (inches)
420115 7315 15 18.5
420130 7330 30 33.5
420140 7340 40 43.5
420150 7350 50 53.5
420160 7360 60 63.5
420180 7380 80 75.5
Double Compartment Regular Wash Sink 12 .25” Deep , 20.5” Wide
Vertical Wash TankFeatures:-Dished Bottom-Made of Heavy Gauge Polished 304 Stainless-Comes with 2” x 14” Adjustable round legs-Removable 2-piece top lid-2” Drain Outlet Options:Ferrule on Drain OutletFlanged Holes available in LidCustom sizes available
Part No. Size(Gal.)
Height( overall)
Diameter TankHeight
423085 85 54” 26” 36”
423120 120 54” 30” 36”
423150 150 66” 30” 48”
423195 195 78” 30” 60”
423280 280 82” 36” 60”
Part # Description
422001 Hand Wash Basin Only
422002 Hand Wash Basin Complete w/ Mixing Faucet
422009 Mixing Faucet Only
(*Part number 426015 is a special Deep 15.25” Double Wash Sink.)
-
48
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
48
MGM Company, Inc. WWW.MGMCOMPANY.COM
AISI 304 SS shield,9/16” wide bands and one piecescrew housings are mechanically interlocked forstrength. Neoprene Gasket conforms to ASTM C564. Use for Depend-O-Drain installation's.
422105 1.5” No Hub Coupling.
Part No. Description
422012 Painted Legs Set ( Regular Sink)
422015 Painted Legs ( Deep Sick)
422005 Painted Bracket Set (Regular Sinks)
422008 Painted Brackets (Deep Sinks)
Part No. Description
422000 Tank Drain Complete w/stopper
422021 Tank Drain Compete w/o stopper
422020 Rubber Stopper
422003 Drain Gasket
422025 Plastic Lock Nut
422022 Zinc Lock Nut
422004 3mm Rubber Gasket
WASH SINKS PARTS & ACCESSORIES
No Hub Coupling
Flexible CouplingFlexible couplings allows for a quick and easy to cast iron or plastic to cast iron or plas-tic. Also used as a strain relief and union for air or liquids. Includes 300 series stainlesssteel clamp.422150 1.5” Coupling422151 2.0” Coupling422152 3.0” Coupling422153 4.0” Coupling
Reducing Flexible Coupling
Flexible reducing coupling allows for a quick and convenient way to connect two differ-ent sizes of pipe. PVC to steel PVC to PVC. Makes and ideal way to connect a 2.5”vacuum pump inlet to 3.0” PVC vacuum line. Also handy has a vibration protectionfrom pump to line coupling. 300 series stainless steel clamps included.422154 2.5” x 3.0” Reducing Coupling422155 3.0” x 4.0” Reducing Coupling
Quick Caps Quick Cap offer a quick, easy way to cap pipe ends, cleanout, and open test pipe.Made of flexible PVC they are made for above ground or underground use.
422170 1.5” Quick Cap422171 2.0” Quick Cap422172 3.0” Quick Cap422173 4.0” Quick Cap
-
49
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
49
MGM Company, Inc. WWW.MGMCOMPANY.COM
CIP Wash Equipment
Distributor Tee’s 241242 Distributor SS w/out tee241244 Distributor SS with out of line tee.241246 Distributor SS with in line tee.241249 Smooth plastic tee421002 Distributor w/o tee black plastic276071 Duck bill drain
Duck Bill Drain Rubber
276071 Duck Bill Drain Each
276073 Box of 100
Nipple closures are available inblack and brown rubber. Fits 9/16”and 5/8” ID milk line inlets.
241258 Rubber Nipple Closure(Black)
Nipple/Inlet Closures
Silicone Diaphragm
Replacement silicone diaphragm for 48000vacuum operated plastic valve also for West-falia Metatron and BM sensors.
241200 Diaphragm each
Inflation/Liner Plug ISO-Model
Plastic ISO artificial teat plugs are used on every farm. Plugs arealso required to do pulsator and vacuum system performancetesting. Plastic plugs are available in black or orange and can bepacked or bagged to fit your distribution needs. Call for informa-tion .242120 Orange Inflation/Liner Plug ISO-Model242121 Black Inflation/Liner Plug ISO-Model
Plastic double hose clip are de-signed to hold twin pulsation hoseto milk hose. Wide 3/4” designkeeps clip for causing any hoserestrictions.
245128 Black Double Hose Clip245230 Blue Double Hose Clip
Hose reinforcing spring. Made ofstainless steel. Used to reinforce themilk hose connections to keep hosesfrom kinking. For use on milk houseup to 1.125 (28 mm) OD. 5.5” long x1.125 ID.
245120 Hose Support Spring. 5.5” long x1.125” ID.
Tube/Hose Clip.Clip holds twin vacuum tubingtogether with 5/8” milk hose.
245125 Black Plastic Clip
-
50
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
50
MGM Company, Inc. WWW.MGMCOMPANY.COM
BENDER MODEL 2800 AIR INJECTOR
MGM # Item # Bender # Description
412832 1 2832 Fuse holder
412831 2 2831 Fuse 2 AMP.
412806 4 2806 Timer-Adj. On/Off 1 to 30 Sec.
412865 9 2865 Sponge Rubber Cushion
415519 10 5519 Solenoid 120Vac
415530 10 5530 Solenoid 240Vac
412891 22 2819 Stopper Rod Assembly
412812 14 2812 Stopper Rod Busing
412846 12 2846 External Spring
415998 9 5998 Rubber Cushing
MGM # Bender Model Description
412820 2800-240V-60 Bender Air Injector 240VAC W/1.5” Ferrule
412802 2800-x Bender Air Injector 240 VAC less Solenoid
412800 2800 Bender Air Injector 120VAC W/1.5” Ferrule
412803 2800-240-50 Bender Air Injector 240VAC 50HZ w/1.5” Ferrule
412804 2800-200 Bender Air Injector 200VAC W/1.5” Ferrule
Complete Control Modules
Spare Parts
Features:1. Designed for larger diameter pipelines.2. Sponge rubber shock absorbing air valve.3. Powered by new solenoid w/adjustable on/
off timer w/slide valve.4. Can be mounted on the wall or pipeline.
-
51
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
51
MGM Company, Inc. WWW.MGMCOMPANY.COM
BENDER MODEL 8950 TIMER CONTROL MODULE
MGM # Item # Bender # Description
412832 2 2832 Fuse holder
412831 7 2831 Fuse 2 AMP.
415513 9 5513 Pressure Switch
418926 14 8926 Fail Timer 100 Minute , 120 VAC
418927 14 8927 Fail Timer 100 Minute , 240 VAC
419750 17 9750 Timer 120 VAC
418752 17 9750-240 Timer 240 VAC
419257 18 9257 24 Hour Clock 120VAC
418238 18 8238 24 Hour Clock 240VAC-60HZ
419240 18 9240 24 Hour Clock 240VAC-50HZ
416265 3 6265 Toggle Switch
MGM # Bender Model Description
418950 8950 Bender Timer Control Module 12VAC
418951 8950-240-60 Bender Timer Control Module 240VAC-60HZ
418952 8950-240– 50. Bender Timer Control Module 240V-50HZ
Key Features:1. Standard 8 Minute Wash Cycle2. Electro—Mechanical Timer3. Failsafe indication4. 24—Hour Clock for Automatic Pre-sanitize.5. Door Interlock6. Combine with 3 Peristaltic pump model9590 or 9740 jar Dispensers.7. Door interlock.8. CSA approved.
Complete Control Modules Less Drain Valve
Spare Parts.
-
52
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
52
MGM Company, Inc. WWW.MGMCOMPANY.COM
BENDER MODEL 7540 DIVERTER
MGM # Bender Model Description
417540 7540 Bender Diverter Valve 120V
417542 7540-240V Bender Diverter Valve 240V
417543 7540-X Bender Diverter Valve lest Solenoid.
MGM # Item # Bender # Description
416071 17 607-C Bellows
416018 21 60183 Stopper Rod Assembly
412578 22 2578 Bushing
412584 23 2584 External Retaining Ring (3 req.)
412582 25 2582 Spacer Washer
412583 25 2583 Internal Retaining Ring
416022 29 60227 Stopper Plug
Spare Parts.
Complete Diverter Valves
MGM # Item # Bender # Description
412563 8 2563 Gasket (2 required)
412563 8 2563 Gasket (2 required)
412659 9 2659 Lower Housing
415519 13 5519 Solenoid 120VAC/50-60HZ
415530 13 5530 Solenoid 240VAC/60HZ
415532 13 5532 Solenoid 240VAC/50HZ
412560 14 2560 Upper Housing
Specifications:1. Model 7540, 120VAC / 50-60
HZ., .740 AMPS.2. Duty Cycle: On Max. 17.5
Minutes. Off Min. 4.5 Min-utes. For 2 Cycles.
1. Model 7540-240, 240VAC /50-60HZ., 740 AMPS.
2. Duty Cycle: On Max. 17.5Minutes. Off Min. 4.5 Min-utes. For 2 Cycles.
-
53
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
53
MGM Company, Inc. WWW.MGMCOMPANY.COM
BENDER MODEL 9590 PERISTALTIC PUMP DISPENSER MODULES
MGM # Item Bender # Description
1 8908 Adjustable Timer , 120VAC,1 - 1023 Second
418908 1 8909 Adjustable Timer , 240VAC,1 -1023 Second
419565 5 9565 Roller Assembly
419576 8 9576 Hi Speed Motor 120VAC, 120RPM
419561 8 9561 Hi Speed Motor 240VAC, 50HZ120 RPM
419597 9 9577 Squeeze Tube Assembly 3/8 ID x 5/8” OD
419257 11 8885 Water Valve With Bracket
412551 11A 32551 Water Valve Coil. 120VAC
412550 11A 32550 Water Valve Coil. 240VAC
MGM No. Bender Model Description
419590 9590 Bender Peristaltic Pump Dispenser 120V, W/water Valves
419592 9590-240V Bender Peristaltic Pump Dispenser 240V, W/water valves
Complete Pump Units less Drain Valve.
Spare Parts.
Features:1. 3 - 20 oz. (590 ml)per minute mo-
tor Driven Peristaltic Pumps.2. Switch Programmable timing to set
pump output. (From 1 to 1023 sec-onds)
3. Hot & Cold Water Valves Includedon Model # 9590. (20 GPM)
4. Detergent, Acid and Sanitize Ca-pacity of 300 OZ. (9,000 Ml)
5. Input Plate for Wash Vat Included.6. Inlet hose w/ weight & screen.7. Used with 8950 Control Module8. CSA Approved.
418876 13 8876 Outlet Adaptor
418814 17 8814 Inlet Adaptor, 3/4”
418869 18 8869 Pressure Hose 1/2” ID x 6 Ft.
411403 20 1403 Hose Screen Gaskets
412678 29 2678 Bottle Cap for Large Container
412528 30 2528 Weight Ceramic
412530 31 2530 Screen
419585 33 9585 Squeeze Tube Replacement Kit
MGM # Item Bender # Description
410788 788 Check Valve Assembly for 3/8” Tub
-
54
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
54
MGM Company, Inc. WWW.MGMCOMPANY.COM
Heavy Duty Split Guard Safety Hobble
NEW 2” wide cow hobble designed for more strength with slightly longer spread forlarger cows to walk freely. Same single unit design features twin locking nickel platedhardware and easy off adjustable Velcro brand hook and loop securing leg straps. Verystrong but soft.
259103 1 pk, 2.0” wide x 21” long
Split Guard Safety Hobble
Strong, lightweight cow hobble provides ideal protection against slipping and splitting outin all conditions especially after calving.. Unique one piece design features easy on andoff adjustable VELCRO brand hook and loop securing leg straps. A spread of 21 “ allowscows to walk freely while wearing Split Guard.
259102 1 pk, 1.5” wide x 21” long.
Leg Bands
Ideal for marking cows with color identifica-tion system.Made of tough nylon VELCRO brand hookand loop material. Leg bands are washableand reusable and can be numbered withpermanent marker. All colors of Velcro legbands are packed 10 per clear plastic bagwith a blank header card.
259091 RED
259092 YELLOW
259093 ORANGE
259094 BLUE
259095 GREEN
259096 NEON GREEN
259097 NEON YELLOW
259098 NEON PINK
259099 NEON ORANGE
LIVE STOCK CARE
Teat Dip Sprayer Hand operated Trigger sprayer, sprays upwardso that a solid spray covers the teats with teatdip. The blue nozzle with stainless insert isresistant to teat dip chemicals. Also availablewith a 4”extended nozzle.
255200 Complete sprayer w/standard nozzle &24 oz. bottle.
255202 Trigger & tube
255204 Bottle only 24 oz.
255201 Blue Standard Nozzle only
292004 Blue 4” Extended Nozzle only
255205 Bottle only 16 oz.
255207 Complete sprayer w/extended nozzle.
-
55
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
55
MGM Company, Inc. WWW.MGMCOMPANY.COM
STAINLESS DISPENSER - HOSE CHUTES - MILKHOUSE DESK -TOWELS
All stainless steel construction Brushed Polish Finish Easy Front Load & mounts on wall Accommodates folded and Round paper towels424012 SS towel Dispenser
Made of heavy gauge Polished Stainless Steel Unique Latch Keeps door Closed Tightly to Keep Insects out. Stainless Steel Piano Hinge Rough Openings are 6” x 6”424509 Telescopic hose chute stainless, 5” to 9”424513 Telescopic hose chute stainless, 9” to 13”
Barn DeskStainless Steel wall MountRoom for records, chartboxes, note pads, etc.Lid folds down for a stablewriting surface.Latch Keeps desk closedtight when not in use.
424010 Barn Desk
Milk Filter Dispensers Hinged Doors for Easy Loading Magnetic latch keeps door closed Stainless Steel Hinge Made of 22 Gauge polished Stainless. Two popular sizes available
424024 3” X24” Holds milk Filter socks ortubes up to 3 in. wide.424036 4/7/8 x 36” Holds all 33” & 36” longmilk Filter Socks & Tubes.
Hose Chutes Telescoping Stainless Steel
Paper Towel Dispenser
Barn Desk Milk Filter Dispenser
Hose Chute Telescoping GalvanizedGalvanized hose chute features 24-guage construction, inside u-shaped door with rollededge. Self closing outer door. Extends from 5” to 9” and rough opening is 6” x 6”.
192010 Galvanized hose chute
Microfiber Premium Dairy Towels. Practical size 12” x 12” light blue or yellow microfiber towels. Use them wet or dry andthey will absorb 7 to 8 times their own weight in water. Microfiber works by attracting dirtand other contaminants like a magnet and trapping them within very fine microscopicfilaments. The fibers are so tiny they are able to remove 99% of bacteria. Due to theirsuperior quality, these microfiber towels can be washed and reused hundreds of times.Machine wash, tumble dry low heat, and do not iron. Do not use fabric softener or chlo-rine bleach. Microfiber towels are packed 50 towels per clear plastic bag with 5 packs percase. Each pack of 50 contains washing instructions. Minimum order is 1 case. Palletcontains 36 cases.
259302 Yellow 28 gram Microfiber towels, case of 250. (5 packs of 50 towels)259303 Blue 34 gram Microfiber towels case of 250. (5 packs of 50 towels)
-
56
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
56
MGM Company, Inc. WWW.MGMCOMPANY.COM
Description Page Description PageClamps 4 Pre-Air Filter 35Hose Clamp 4 Vacuum Air Filter 35Pipeline Clamp 4 Final Air Filter 35Ferrules 5,6 Vacuum Gate Valve 36,37End Caps 7 Gate Valve 36,37Elbows, Stainless Steel 8,9 PVC Pipe 38U-Bend 9 PVC Fittings 39 - 44Tee, Stainless Steel 10 Vacuum Check Valve 44Y-Lateral 10 Drip Drain 45Adaptors, Stainless Steel 11 Vacuum Line Drain 45Reducers, Stainless Steel 12,13 Fresh Air Filter 45Hex Nuts 13 Interpuls Adaptors 45Wrench, Hex Nut 13 Pulsator Adaptors 45Wall Flange 13 Anti-Reversing Check Valve 44,45Air Blow Valve 14,15 Pulsator 46Y-Ball Check Valve 14,15 Stall Cocks 46Check Valves, Stainless 14 Wash Sinks 47In Line Ball Check Valve 14 Hand Wash Sink 47Butterfly Valve 16 Wash Sinks Mounting Legs 48Gaskets, Pipe Line 18 Tanks Drains 48Flapper Valves 18 Ho-Hub Coubling 48Pipeline Hanger 19 Rubber Coublings 48Milk Valves 20 Distributor Tees 49Milk Inlets, Stainless Steel 20 Duck Bill Drain 49Shut-Offs 21 Hose Clips 49Delrin Valve 21 Hose Spring 49Air Forks 21 Spring, Hose Reinforcing 49Milking Shells 21 Silicone Diaphragm 49Shells 21 Inflation Plugs 49Receivers 22,23 Liner Plugs 49Moisture Traps 24 Goosenecks 20Traps 24 Fresh Cow Lid 21Float Ball 24 Bender Washing Equipment 50 - 53Balls, Plastic 24 Leg Bands 54Covers 25 Hobbles 54Vacuum Drain Valve 25 Teat Dip Sprayers 54Milk Pump 25 Sprayers 54Liquid Level Control 26 Dairy Towels 55Milk Pump Control 26 Micro-Fiber Towels 55Milk Filters/Strainers 28 Dispensers 55PVC Tanks 30 - 34 Hose Chute 55Balance Tanks 30 - 34Header Tanks 30 - 34Distribution Tanks 30 - 34
ALPHABETICAL INDEX
-
57
MAIL: PO BOX 8186 NAPLES, FL 34101 PHONE 1-239-821-6007 FAX: 1-239-236-1270 E-MAIL:[email protected]
57
MGM Company, Inc. WWW.MGMCOMPANY.COM
PART NUMBBER TO PAGE NUMBER INDEX
109222 -- 25 152130 -- 4 152487 -- 12 152755 -- 8 152903 -- 12121500 -- 28 152140 -- 4 152488 -- 12 152757 -- 8 152904 -- 12121501 -- 28 152142 -- 16 152489 -- 12 152759 -- 8 152905 -- 12121502 -- 28 152143 -- 16 152490 -- 12 152761 -- 8 152906 -- 12121503 -- 28 152160 -- 4 152500 -- 10 152763 -- 8 152907 -- 12121506 -- 28 152161 -- 4 152501 -- 10 152830 -- 12 152915 -- 4121507 -- 28 152210 -- 5 152502 -- 10 152832 -- 12 152920 -- 4121508 -- 28 152215 -- 5 152503 -- 10 152833 -- 12 152925 -- 4121509 -- 28 152220 -- 5 152504 -- 10 152834 -- 12 152930 -- 4121510 -- 25 152225 -- 5 152510 -- 11 152835 -- 12 152940 -- 4121512 -- 28 152230 -- 5 152511 -- 11 152836 -- 12 152955 -- 4121514 -- 28 152240 -- 5 152512 -- 11 152840 -- 9 152960 -- 10121517 -- 28 152310 -- 5 152615 -- 7 152841 -- 9 152961 -- 10121518 -- 28 152315 -- 5 152620 -- 7 152842 -- 9 152962 -- 10121520 -- 28 152320 -- 5 152621 -- 7 152843 -- 9 152963 -- 10121522 -- 28 152325 -- 5 152622 -- 7 152844 -- 9 152964 -- 10121530 -- 28 152330 -- 5 152623 -- 7 152845 -- 9 152965 -- 10121531 -- 28 152340 -- 5 152625 -- 7 152850 -- 9 152967 -- 10121532 -- 28 152410 -- 5 152630 -- 7 152851 -- 9 152969 -- 10121533 -- 28 152413 -- 16 152640 -- 7 152852 -- 9 152970 -- 10121534 -- 28 152415 -- 5 152651 -- 7 152853 -- 9 152971 -- 10121535 -- 28 152420 -- 5 152652 -- 7 152854 -- 9 152972 -- 10121536 -- 28 152425 -- 5 152653 -- 7 152855 -- 9 152990 -- 12121537 -- 28 152430 -- 5 152654 -- 7 152860 -- 9 152991 -- 12121538 -- 28 152440 -- 5 152655 -- 7 152861 -- 9 152992 -- 12150000 -- 4 152450 -- 5 152659 -- 7 152862 -- 9 152993 -- 12150003 -- 4 152451 -- 5 152661 -- 7 152863 -- 9 152994 -- 12150007 -- 4 152452 -- 5 152662 -- 7 152864 -- 9 152995 -- 12150008 -- 4 152453 -- 5 152663 -- 7 152865 -- 9 152996 -- 12150009 -- 4 152454 -- 5 152700 -- 11 152870 -- 9 153010 -- 16150012 -- 4 152459 -- 11 152701 -- 11 152871 -- 9 153015 -- 16150013 -- 4 152460 -- 11 152702 -- 11 152872 -- 9 153020 -- 16150014 -- 4 152461 -- 11 152705 -- 11 152873 -- 9 153025 -- 16150015 -- 4 152462 -- 11 152706 -- 11 152874 -- 9 153030 -- 16150019 -- 4 152463 -- 11 152707 -- 11 152875 -- 9 153040 -- 16150022 -- 4 152464 -- 11 152709 -- 8 152880 -- 10 153045 -- 16150025 -- 4 152465 -- 11 152710 -- 4 152881 -- 10 153047 -- 16150027 -- 4 152466 -- 11 152712 -- 4 152882 -- 10 153049 -- 16150029 -- 4 152467 -- 11 152713 -- 4 152883 -- 10 153050 -- 16150033 -- 4 152470 -- 8 152714 -- 4 152884 -- 10 153051 -- 16152010 -- 13 152471 -- 8 152715 -- 8 152885 -- 10 153052 -- 16152015 -- 13 152472 -- 8 152716 -- 4 152886 -- 10 153053 -- 16152020 -- 13 152473 -- 8 152720 -- 8 152887 -- 10 153054 -- 16152025 -- 13 152474 -- 8 152725 -- 8 152888 -- 10 153055 -- 16152030 -- 13 152475 -- 8 152726 -- 14 152889 -- 10 153056 -- 16152040 -- 13 152476 -- 8 152727 -- 14 152890 -- 10 153057 -- 16152105 -- 4 152477 -- 8 152728 -- 14 152891 -- 10 153058 -- 16152115 -- 4 152478 -- 8 152730 -- 8 152900 -- 12 153059 -- 16152120 -- 4 152479 -- 8 152740 -- 8 152901 -- 12 153060 -- 16152125 -- 4 152486 -- 12 152754 -- 8 152902 -- 12 153061 -- 16
-
58
MAIL: PO BOX 8186 NAPLES, FL 34101