damage control (dc) - dcfpnavymil.org305 basic chemical, biological, and radiological (cbr) defense...

Naval Education NAVEDTRA 43119-K Training Command September 2011

DAMAGE CONTROL (DC)

NAME (Rate/Rank)______________________________

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

PERSONNEL

QUALIFICATION

STANDARD FOR

Although the words “he”, “him,” and “his”

are used sparingly in this manual to

enhance communication, they are not

intended to be gender driven nor to affront

or discriminate against anyone reading

this material.

1

TABLE OF CONTENTS

Page ACKNOWLEDGEMENTS ----------------------------------------------------------------------------------------- 3 INTRODUCTION ---------------------------------------------------------------------------------------------------- 5 SUMMARY OF CHANGES ---------------------------------------------------------------------------------------- 7 WATCHSTATION REQUALIFICATIONS ---------------------------------------------------------------------- 9 ACRONYMS -------------------------------------------------------------------------------------------------------- 11 100 INTRODUCTION TO FUNDAMENTALS ----------------------------------------------------------- 13 101 Damage Control (DC) Safety Precautions --------------------------------------------------------- 15 102 Damage Control (DC) Communications/Symbology --------------------------------------------- 20 103 Firefighting ------------------------------------------------------------------------------------------------- 26 104 Basic Damage Control (DC) --------------------------------------------------------------------------- 30 105 First-Aid and Rescue ------------------------------------------------------------------------------------ 34 106 Chemical, Biological, and Radiological (CBR) Defense ---------------------------------------- 38 107 Damage Control (DC) Organization ----------------------------------------------------------------- 43 108 Fire Watch ------------------------------------------------------------------------------------------------- 45 109 Conflagration ---------------------------------------------------------------------------------------------- 46 110 Battle Damage Repair ---------------------------------------------------------------------------------- 47 111 Hazardous Material Control and Management (HMC&M) Program-------------------------- 50 112 Computer Based Damage Control (DC) Management System and Software ------------- 52 113 Investigation ----------------------------------------------------------------------------------------------- 53 114 Stability ----------------------------------------------------------------------------------------------------- 55 200 INTRODUCTION TO SYSTEMS --------------------------------------------------------------------- 65 201 Damage Control (DC) Communications ------------------------------------------------------------ 67 202 Emergency Escape Breathing Device (EEBD) ---------------------------------------------------- 70 203 Self-Contained Breathing Apparatus (SCBA) ----------------------------------------------------- 72 204 Personal Protective Clothing Equipment ----------------------------------------------------------- 75 205 Watertight Closures/Hull Fittings --------------------------------------------------------------------- 77 206 Portable Firefighting Equipment ---------------------------------------------------------------------- 79 207 Portable Damage Control (DC) Equipment -------------------------------------------------------- 81 208 Installed Fire Extinguishing ---------------------------------------------------------------------------- 83 209 Aqueous Film Forming Foam (AFFF) --------------------------------------------------------------- 86 210 Firemain ---------------------------------------------------------------------------------------------------- 89 211 Access/Overhaul Equipment -------------------------------------------------------------------------- 91 212 Ventilation -------------------------------------------------------------------------------------------------- 93 213 Installed Drainage ---------------------------------------------------------------------------------------- 95 214 Chemical, Biological, and Radiological (CBR) Detection And Decontamination

Equipment ------------------------------------------------------------------------------------------------- 97 215 Casualty Power Distribution -------------------------------------------------------------------------- 100 216 Dewatering Equipment/Pumps ----------------------------------------------------------------------- 102 217 Crash and Salvage Equipment ---------------------------------------------------------------------- 105 218 Conflagration Station ----------------------------------------------------------------------------------- 106

2

TABLE OF CONTENTS (CONT'D)

Page 219 Pipe Repair/Patching ----------------------------------------------------------------------------------- 108 220 Plugging Kit Equipment -------------------------------------------------------------------------------- 110 221 Shoring ---------------------------------------------------------------------------------------------------- 112 222 Computer Based Damage Control (DC) Management ----------------------------------------- 114 223 Self-Contained Breathing Apparatus (SCBA) Breathing Air Charging System (BACS) 116 300 INTRODUCTION TO WATCHSTATIONS -------------------------------------------------------- 121 301 Basic Damage Control (DC) Communications --------------------------------------------------- 123 302 Basic First-Aid ------------------------------------------------------------------------------------------- 131 303 Basic Firefighting ---------------------------------------------------------------------------------------- 137 304 Fire Watch Stander ------------------------------------------------------------------------------------- 151 305 Basic Chemical, Biological, and Radiological (CBR) Defense ------------------------------- 157 306 Basic Damage Control (DC) -------------------------------------------------------------------------- 165 307 Advanced Damage Control (DC) -------------------------------------------------------------------- 177 308 Team Leader --------------------------------------------------------------------------------------------- 187 309 Advanced Chemical, Biological, and Radiological (CBR) Defense Person --------------- 195 310 Advanced First-Aid/Stretcher Bearer --------------------------------------------------------------- 209 311 Aqueous Film Forming Foam (AFFF)/Transfer Station Operator ---------------------------- 215 312 Repair Party Investigator ------------------------------------------------------------------------------ 223 313 Scene Leader -------------------------------------------------------------------------------------------- 231 314 Conflagration Station Operator ---------------------------------------------------------------------- 241 315 Crash and Salvage Crewman/Rescueman --------------------------------------------------------- 249 316 Crash and Salvage Scene Leader ------------------------------------------------------------------- 257 317 Computer Based Damage Control (DC) Management System and Software Operator - 263 318 Repair Party Leader ------------------------------------------------------------------------------------ 269 319 Repair Party Electrician -------------------------------------------------------------------------------- 277 320 Damage Control Training Team (DCTT) Member ------------------------------------------------ 283 QUALIFICATION PROGRESS SUMMARY ---------------------------------------------------------------- 293 LIST OF REFERENCES ---------------------------------------------------------------------------------------- 297

3

ACKNOWLEDGEMENTS The PQS Development Group gratefully acknowledges the assistance of the following personnel in writing this PQS: DCCM(SW/AW) Mark WEATHERS CNE Learning Site, Fort Leonardwood DCCM(SW/AW) Terry WYLIE CNE Learning Site, Norfolk DCCS(SW) Erich BUHLER SWOS, N74 DCCS(SW) Randall SPENNY ATG, San Diego DCCS(SW/AW) Brian WILCOX CNSP DCC(SW) Roger NAYLOR ATG, Norfolk DCC(SW/AW) Steve ROBERTS CNAF Mr. Ron ORASON CNSP Mr. Ron ROLLER NSWC, Dahlgren Division The Center for Naval Engineering PQS Development Group recognizes the following personnel for the time and effort put forth reviewing and providing feedback to improve this Standard DCC(SW) George FARRINGTON ATG, Mayport HMC(SW/FMF) Steven DENOMME ATG, Mayport HTCM(SW) Ronnie MERRIMAN CNE EMC(SW) Marcel WADE CNE

Center for Naval Engineering PQS Development Group personnel who provided direct support for this PQS: Mrs. Delphine JACKSON Program Manager MMC (SW/AW) Mark GOLEY Facilitator

The Model Manager for this PQS: CENTER FOR NAVAL ENGINEERING DSN 564-5332

5

INTRODUCTION

PQS PROGRAM This PQS program is a qualification system for officers and enlisted personnel where certification of a minimum level of competency is required prior to qualifying to perform specific duties. A PQS is a compilation of the minimum knowledge and skills that an individual must demonstrate in order to qualify to stand watches or perform other specific routine duties necessary for the safety, security or proper operation of a ship, aircraft or support system. The objective of PQS is to standardize and facilitate these qualifications.

CANCELLATION This Standard cancels and supersedes NAVEDTRA 43119-J.

APPLICABILITY This PQS is applicable to all naval ships.

MODEL MANAGER The Model Manager Command manages a specific PQS manual. This includes overseeing the process of monitoring and updating assigned PQS manuals from the standpoint of technical content and relevance within the community.

TAILORING To command tailor this package, first have it reviewed by one or more of your most qualified individuals. Delete any portions covering systems and equipment not installed on your ship, aircraft or unit. Next, add any line items, fundamentals, systems and watchstations/workstations that are unique to your command but not already covered in this package. Finally, the package should be reviewed by the cognizant department head and required changes approved by the Commanding Officer or his designated representative. Retain the approved master copy on file for use in tailoring individual packages.

QUALIFIER The PQS Qualifier is designated in writing by the Commanding Officer to sign off individual watchstations. Qualifiers will normally be E-5 or above and, as a minimum, must have completed the PQS they are authorized to sign off. The names of designated Qualifiers should be made known to all members of the unit or department. The means of maintaining this listing is at the discretion of individual commands. For more information on the duties and responsibilities of PQS Qualifiers, see the PQS Unit Coordinator’s Guide.

6

INTRODUCTION (CONT’D)

CONTENTS PQS is divided into three sections. The 100 Section (Fundamentals) contains the fundamental knowledge from technical manuals and other texts necessary to satisfactorily understand the watchstation/workstation duties. The 200 Section (Systems) is designed to acquaint you with the systems you will be required to operate at your watchstation/workstation. The 300 Section (Watchstations) lists the tasks you will be required to satisfactorily perform in order to achieve final PQS qualification for a particular watchstation/workstation. All three sections may not apply to this PQS, but where applicable, detailed explanations are provided at the front of each section.

REFERENCES The references used during the writing of this PQS package were the latest available to the workshop, however, the most current references available should be used when qualifying with this Standard.

NOTES Classified references may be used in the development of PQS. If such references are used, do not make notes in this book as answers to questions in this Standard may be classified.

TRAINEE Your supervisor will tell you which watchstations/workstations you are to complete and in what order. Before getting started, turn to the 300 Section first and find your watchstation/workstation. This will tell you what you should do before starting your watchstation/workstation tasks. You may be required to complete another PQS, a school, or other watchstations/workstations within this package. It will also tell you which fundamentals and/or systems from this package you must complete prior to qualification at your watchstation/workstation. If you have any questions or are unable to locate references, contact your supervisor or qualifier. Good luck!

PQS FEEDBACK REPORTS This PQS was developed using information available at the time of writing. When equipment and requirements change, the PQS needs to be revised. The only way the PQS Development Group knows of these changes is by you, the user, telling us either in a letter or via the Feedback Report contained in the back of this book. You can tell us of new systems and requirements, or of errors you find.

7

SUMMARY OF CHANGES

CHANGES TO FUNDAMENTALS, SYSTEMS, AND WATCHSTATIONS: Fundamental Title Action Comment Damage Control (DC) Safety Precautions Modified Updated references Chemical, Biological, and Radiological (CBR) Defense

Modified Updated to reflect current information and references

Conflagration Modified Updated references Electrician Electrical Added System Title Action Comment Damage Control (DC) Communications Modified Updated references Oxygen Breathing Apparatus (OBA) Deleted Installed Fire Extinguishing Modified Updated to include Aqueous Film Forming Foam (AFFF) Modified Updated references Firemain Modified Updated references Access/Overhaul Equipment Modified Updated references Ventilation Modified Updated references Chemical, Biological, and Radiological (CBR) Detection and Decontamination Equipment

Modified Updated to reflect current information and references

Dewatering Equipment/Pumps Modified Updated references Conflagration Station Modified Updated references Pip Repair/Patching Modified Updated to reflect current

information Water Mist Fire Extinguishing System Deleted Consolidated with Installed Fire

Extinguishing System Watchstation Title Action Comment Basic Damage Control (DC) Communications

Modified Updated to reflect current information

Basic First-Aid Modified Updated to reflect current information

Basic Firefighting Modified Updated to reflect current information

Fire Watch Stander Modified Updated to reflect current information

Chemical, Biological, and Radiological (CBR) Defense


Basic Damage Control (DC) Modified Updated to reflect current information

Advanced Damage Control (DC) Modified Updated to reflect current information


Team Leader Modified Updated to reflect current information

8

SUMMARY OF CHANGES (CONT’D) Advanced Chemical, Biological, and Radiological (CBR) Defense Person


Aqueous Film Forming Foam (AFFF)/Transfer Station Operator



Repair Party Investigator Modified Updated to reflect current information

Scene Leader Modified Updated to reflect current information

Repair Party Leader Modified Updated to reflect current information

Repair Party Electrician Modified Updated to reflect current information

Damage Control Training Team (DCTT) Member


9

WATCHSTATION REQUALIFICATIONS Due to changes in policies, systems, or procedures, personnel dealing with the subject matter of this PQS may be required to requalify IAW NAVEDTRA 43100-1K, Ch. 5, PQS Unit Coordinator’s Guide. The following watchstations regardless of qualifications achieved in previous versions, shall be completed. None.

11

ACRONYMS USED IN THIS PQS Not all acronyms or abbreviations used in this PQS are defined here. The Subject Matter Experts from the Fleet who wrote this Standard determined the following acronyms or abbreviations may not be commonly known throughout their community and should be defined to avoid confusion. If there is a question concerning an acronym or abbreviation not spelled out on this page nor anywhere else in the Standard, use the references listed on the line item containing the acronym or abbreviation in question.

ALO Action Lightweight Overboot

APC Aqueous Potassium Carbonate

BACS Breathing Air Charging System

BMMFR Bridge Mounted Multifunction Radiac

BMR Basic Military Requirements

CANA Convulsion Antidote for Nerve Agent

CBR Chemical Biological Radiological CCA Contamination Control Area

CMWD Counter Measure Washdown

CPR Cardio-pulmonaire Ressuscitation

CPS Collective Protection System

CTA Casualty Triage Area

DCA Damage Control Assistant

DCAMS Damage Control Action Management Software DCO Damage Control Officer

DCRS Damage Control Repair Station

DCTT Damage Control Training Team

DFU Dry Filter Unit

EEBD Emergency Escape Breathing Device

EMP Electromagnetic Pulse

EWARP Emergency Water Activated Repair Patch

FFE Firefighting Ensemble

FO Fuel Oil

FWFF Freshwater Firefighting

HHA Hand Held Assay HM Hazardous Material

HP High Pressure

IMS Inventory Management System

IVCS Interior Voice Communication System

JBPDS Joint Biological Pint Detector System

JSLIST Joint Service Integrated Lightweight Suit Technology

LO Lube Oil

MFR Multifunction Radiac

MOPP Mission Oriented Protective Posture MPE Maximum Permissible Exposure

12

ACRONYMS USED IN THIS PQS (CONT’D) NAPP Nerve Agent Pretreatment Pyridostigmine

OOC Out of Commission

PECU Portable Exothermic Cutting Unit

PHARS Portable Hydraulic Access and Rescue System

PJHS Pipe Jumper Hose System

PKP Potassium Bicarbonate

R and A Rescue and Assistance

RAT Re-entry Assessment Team

RIP Readiness Improvement Program

RPM Repair Party Manual RSDL Reactive Skin Decontamination Lotion

SACPS Selected Area Collective Protection System

SCBA Self-Contained Breathing Apparatus

TREE Transition Radiation Effect on Electronics

13

100 INTRODUCTION TO FUNDAMENTALS

100.1 INTRODUCTION

This PQS begins with a Fundamentals section covering the basic knowledge and principles needed to understand the equipment or duties to be studied. Normally, you would have acquired the knowledge required in the Fundamentals section during the school phase of your training. If you have not been to school or if you need a refresher, the references listed at the beginning of each fundamental will aid you in a self-study program. All references cited for study are selected according to their credibility and availability.

100.2 HOW TO COMPLETE

The fundamentals you will have to complete are listed in the watchstation (300 section) for each watchstation. You should complete all required fundamentals before starting the systems and watchstation portions of this PQS, since knowledge gained from fundamentals will aid you in understanding the systems and your watchstation tasks. When you feel you have a complete understanding of one fundamental or more, contact your Qualifier. If you are attempting initial qualification, your Qualifier will expect you to satisfactorily answer all line items in the fundamentals. If you are requalifying or have completed the appropriate schools, your Qualifier may require you to answer representative line items to determine if you have retained the necessary knowledge for your watchstation. If your command requires an oral board or written examination for final qualification, you may be asked any questions from the fundamentals required for your watchstation.

15

101 101 DAMAGE CONTROL (DC) SAFETY PRECAUTIONS FUNDAMENTALS References: [a] OPNAVINST 5100.19E, Vol. l, Navy Occupational Safety and Health (NAVOSH)

Program Manual for Forces Afloat [b] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [c] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [d] EE100-BU-GYD-010, Damage Control Wirefree Communications System,

AN/SRC-53(V) MX300R Limited, AN/SRC-53A(V) MX300R Full, AN/SRC-53A(V)1 Saber R Full, AN/SRC-53(V)1 LHA-1

[e] Manufacturer's Technical Manual for Portable Exothermic Cutting Unit [f] Scott Field Level Maintenance Manual for the Air-Pak 4.5 and 2.2 [g] Instruction Manual, Jaws of Life Rescue Tools, JL32b, JL27 [h] OPNAVINST 3500.39C, Operational Risk Management [i] Technical Manual, Model WF-20 RAMFAN/Model RAMFAN 2000 [j] OPNAVINST 3120.32C, Standard Organization and Regulations Manual of the U.S.

Navy (SORM) [k] OPNAVINST 5100.19E, Vol. ll, Navy Occupational Safety and Health (NAVOSH)

Program Manual for Forces Afloat [l] OPNAVINST 5100.19E, Vol. lll, Navy Occupational Safety and Health (NAVOSH)

Program Manual for Forces Afloat 101.1 State the safety precautions for portable electrical power tools. [ref. a, ch. B7] ___________________________________ (Signature and Date) .2 Discuss the safety precautions associated with the SCBA. [ref. f, sec. 1] ___________________________________ (Signature and Date) .3 What are the dangers to personnel entering an unventilated space filled with CO2?

[ref. c, sec. 2] ___________________________________ (Signature and Date) .4 What precautions must be followed prior to re-entering a compartment flooded with

HALON/HFP/HFP? [ref. c, sec. 10] ___________________________________ (Signature and Date)

16

101 DAMAGE CONTROL (DC) SAFETY PRECAUTIONS FUNDAMENTALS

(CONT’D) 101.5 What are the personnel hazards involving HALON/HFP 1301/HFP when it is used to

extinguish a fire in a compartment? [ref. c, sec. 1] ___________________________________ (Signature and Date) .6 What are the products of HALON/HFP 1301/HFP when exposed to open flame?

[ref. c, sec. 1] ___________________________________ (Signature and Date) .7 Discuss the hazards of HALON/HFP 1301/HFP to personnel. [ref. c, sec. 1] ___________________________________ (Signature and Date) .8 Discuss the proper procedures for opening a watertight closure when flooding is

suspected on the opposite side. [ref. b, sec. 40] ___________________________________ (Signature and Date) .9 State the reasons for not using a solid stream of water on class B and C fires.

[ref. c, sec. 1] ___________________________________ (Signature and Date) .10 Discuss safety requirements prior to passing through watertight closures.

[ref. l, ch. D1] ___________________________________ (Signature and Date) .11 Discuss safety requirements when opening accesses in bulkheads or decks that are

normally closed. [ref. l, ch. D1] ___________________________________ (Signature and Date) .12 State the precautions to be observed when handling and stowing all compressed

gas cylinders. [ref. k, ch. C23] ___________________________________ (Signature and Date)

17


(CONT’D) 101.13 Discuss the safety precautions associated with handling a submersible pump.

[ref. c, sec. 5] ___________________________________ (Signature and Date) .14 What are the dangers involved in the operation of an internal combustion engine

below decks? [ref. c, sec. 4] ___________________________________ (Signature and Date) .15 State the reason for using a strainer when using portable pumps. [ref. c, sec. 4] ___________________________________ (Signature and Date) .16 What are the routes of travel to be followed when proceeding to general quarters,

abandon ship, and man overboard stations? [ref. j, ch. 5] ___________________________________ (Signature and Date) .17 What hazards exist during the operation of the PECU? [ref. e, ch. 2] ___________________________________ (Signature and Date) .18 Discuss the safety precautions to be observed when using wireless communications

systems. [ref. d, ch. 2] ___________________________________ (Signature and Date) .19 State the precautions associated with using the thermal imager in a hot, smoke-filled

environment. [ref. e, sec. 6] ___________________________________ (Signature and Date) .20 State the protection provided by the following safety equipment, including examples

of shipboard evolutions that require their use: [ref. a] a. Long-sleeved shirt/fire retardant coverall/apron [ch. B12] b. Goggles/face shields [ch. B5]

18


(CONT’D) 101.20 c. Protective/rubber gloves [ch. B12] d. Safety shoes [ch. B12] e. Ear plugs/protectors [ch. B4] f. Life jacket [ch. B12] ___________________________________ (Signature and Date) .21 State the reasons for grounding the ramfan. [ref. i, ch. 4] ___________________________________ (Signature and Date) .22 State the hazards and ship wide impact associated with leaving sound-powered

phone jackbox caps off after use. [ref. b, sec. 37] ___________________________________ (Signature and Date) .23 Discuss the safety precautions associated with PHARS. [ref. g] ___________________________________ (Signature and Date) .24 State the safety precautions involving operation of equipment without proper

machine guards. [ref. k, ch. C1] ___________________________________ (Signature and Date) .25 Discuss the concept of ORM. [ref.h] ___________________________________ (Signature and Date) .26 Explain the following as they apply to ORM: [ref. h] a. Identifying hazards b. Assessing hazards c. Making risk decisions d. Implementing controls e. Supervising ___________________________________ (Signature and Date)

19


(CONT’D) 101.27 Discuss the proper procedure for opening a pressurized sounding tube.

[ref. b, sec.4] ___________________________________ (Signature and Date)

20

102 102 DAMAGE CONTROL (DC) COMMUNICATIONS/SYMBOLOGY

FUNDAMENTALS References: [a] NTTP 3-20.31 (Rev. A), Surface Ship Survivability [b] NAVEDTRA 14232, Sound Powered Phone Talker’s Manual [c] NAVEDTRA 14057-PPR, Damage Controlman [d] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control 102.1 For the following, draw the symbols used in DC communications: [ref. d, app. B] a. Fire (classes Unknown/A/B/C/D): 1. Class __ fire reported 2. Class __ fire engaged 3. No class __ fire b. Smoke (Unknown/White/Black): 1. __Smoke reported 2. __Smoke engaged 3. No __ smoke c. Heat Transfer 1. Heat transfer reported 2. Heat transfer engaged 3. No heat transfer d. Flooding: 1. Flooding reported 2. Flooding engaged 3. No flooding e. Ruptured system

(MISC/AFFF/CW/ECW/FM/FO/HM/JP5/LO/PA/PW/STM/SW): 1. Rupture reported 2. Rupture engaged 3. No rupture f. Point of weapon impact: 1. Point of weapon impact reported 2. Point of weapon impact engaged 3. No point of weapon impact g. Fragmentation:

1. Fragmentation reported 2. Fragmentation engaged 3. No fragmentation

h. Debris: 1. Debris reported 2. Debris engaged 3. No debris

21

102 DAMAGE CONTROL (DC) COMMUNICATIONS/SYMBOLOGY

FUNDAMENTALS (CONT’D)

102.1 i. Hole (OVHD/BHD/DECK): 1. Hole reported 2. Hole engaged 3. No hole j. Structural damage: 1. Structural damage reported 2. Structural damage engaged 3. No structural damage k. Jammed access: 1. Jammed access reported 2. Jammed access engaged 3. No jammed access

l. Electrical power lost: 1. Electrical power lost reported 2. Electrical power lost engaged 3. No electrical power lost m. Electrical damage: 1. Electrical damage reported 2. Electrical damage engaged 3. No electrical damage n. Casualty power: 1. Casualty power ordered reported 2. Casualty power engaged 3. No casualty power o. Casualty power lost: 1. Casualty power lost reported 2. Casualty power lost engaged 3. No casualty power lost p. Communication lost: 1. Lost communication reported 2. Lost communication engaged 3. No lost communications q. Mechanical failure: 1. Mechanical failure reported 2. Mechanical failure engaged 3. No mechanical failure r. Mechanical damage: 1. Mechanical damage reported 2. Mechanical damage engaged 3. No mechanical damage s. Hazmat/toxic spill: 1. __ reported 2. __ engaged 3. No__

22


FUNDAMENTALS (CONT’D) 102.1 t. Chemical hazard: 1. Chemical hazard reported 2. Chemical hazard engaged 3. No chemical hazard u. Biological hazard: 1. Biological hazard reported 2. Biological hazard engaged 3. No biological hazard v. Radiation hazard: 1. Radiation hazard reported 2. Radiation hazard engaged 3 No radiation hazard w. Unexploded ordnance 1. Unexploded ordnance reported 2. Unexploded ordnance engaged 3. No unexploded ordnance x. Primary casualty boundaries: 1. Primary casualty boundary ordered 2. Primary casualty boundary set y. Secondary casualty boundaries: 1. Secondary casualty boundary ordered 2. Secondary casualty boundary set z. Primary Fire boundaries: 1. Primary fire boundary ordered 2. Primary fire boundary set aa. Secondary fire boundaries: 1. Secondary fire boundary ordered 2. Secondary fire boundary set ab. Primary flooding boundaries: 1. Primary flooding boundary ordered 2. Primary flooding boundary set ac. Secondary flooding boundaries: 1. Flooding boundaries ordered 2. Flooding boundaries set ad. Primary smoke boundaries: 1. Primary smoke boundary ordered 2. Primary smoke boundary set ae. Secondary smoke boundaries: 1. Secondary smoke boundary ordered 2. Secondary smoke boundary set af. Crew casualty: (personnel) 1. Personnel casualty reported 2. Personnel casualty engaged 3. No personnel casualty ___________________________________ (Signature and Date)

23


FUNDAMENTALS (CONT’D) 102.2 State the abbreviations for the following DC terms: [ref. d, app. A] a. AFFF b. Air test cap c. Battle dressing station d. Bulkhead e. Collection, holding, and transfer f. Chill water g. Chill water cutout valve h. CMWD system i. Compartment j. Cutout valve k. CPS l. Circle William m. DC Central n. DC repair station o. Deck drain valve p. Deck q. Drain r. EEBD s. Firefighting ensemble t. Firemain valve u. Fire plug v. Naval firefighter’s thermal imager w. Overboard x. Potable water y. Quick acting watertight door z. Quick acting watertight hatch aa. Quick acting watertight scuttle ab. SCBA ac. Supply ad. Sounding tube cap ae. Tank af. Wire free communications ag. Watertight ___________________________________ (Signature and Date) .3 Explain the basic operation of the following DC communication systems: a. Sound-powered telephone [ref. a, sec. 4] b. Wire free/HYDRA [ref. b, ch. 2] c. IVCS [ref. a, ch. 4] d. DCAMS [ref. d, sec. 39]

24


FUNDAMENTALS (CONT’D) 102.3 e. Ship's general announcing [ref. c, ch. 2] f. Intercom units [ref. c, ch. 2] g. Ship's service telephones [ref. c, ch. 2] h. Messenger [ref. d, sec. 37] ___________________________________ (Signature and Date) .4 State the rules for circuit discipline. [ref. b, ch. 2] ___________________________________ (Signature and Date) .5 What are the three parts of a message? [ref. b, ch. 2; ref. d, sec. 37] ___________________________________ (Signature and Date) .6 Explain the proper way to acknowledge a message. [ref. b, ch. 2; ref. d, sec. 37] ___________________________________ (Signature and Date) .7 Explain the procedures for temporary leaving the circuit/relieving the phone talker.

[ref. b, ch. 2] ___________________________________ (Signature and Date) .8 Explain the procedure for securing from phone talking and storing sound-powered

phones. [ref. b, chs. 2, 3] ___________________________________ (Signature and Date) .9 Explain the procedure for checking sound-powered phone operations when battle

damage is sustained. [ref. b, ch. 2] ___________________________________ (Signature and Date)

25


FUNDAMENTALS (CONT’D) 102.10 Explain the station communication priority reporting sequence used aboard your

ship. [ref. c, ch. 2] ___________________________________ (Signature and Date) .11 State the titles of the following sound-powered telephone circuits and discuss their

uses: [ref. a, ch. 4; ref. d, sec. 37] a. JA b. 4JG c. IJV d. 2JV e. 3JV f. 4JV g. 5JV h. 2JZ i. 3JZ j. 4JZ k. 5JZ l. 6JZ m. 7JZ n. 11JZ o. X4OJ p. X50J ___________________________________ (Signature and Date) .12 State the titles of the following IVCS circuits: [ref. a, ch. 4; ref. d, sec. 37] a. N51 b. N53 c. N84 d. N85 e. N80 f. N81 g. N82 h. N86 ___________________________________ (Signature and Date)

26

103 103 FIREFIGHTING FUNDAMENTALS References: [a] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [b] NAVEDTRA 14057-PPR, Damage Controlman [c] NAVAIR 00-80R-14, NATOPS U.S. Navy Aircraft Firefighting and Rescue Manual [d] NAVEDTRA 14109, Gunner’s Mate 3 & 2 103.1 Explain the fire tetrahedron and state how it relates to firefighting and fire prevention

procedures. [ref. a, sec. 1] ___________________________________ (Signature and Date) .2 Define the following terms: [ref. b, ch.4, and Glossary] a. Flash point b. Fire point c. Spontaneous combustion d. Auto-ignition/self-ignition point ___________________________________ (Signature and Date) .3 Explain the following extinguishing agents: [ref. a, sec. 1] a. Water b. CO2 c. AFFF d. PKP e. HALON/HFP f. APC g. Watermist ___________________________________ (Signature and Date) .4 For each of the following items identify what class of fire it falls under, explain why it

must be treated as a special hazard, and state the recommended extinguishing agent: [ref. a]

a. Lithium [sec. 8] b. Magnesium [sec. 1]

27

103 FIREFIGHTING FUNDAMENTALS (CONT’D) 103.4 c. Deep fat fryer [sec. 8] d. Otto fuel II [sec. 1] ___________________________________ (Signature and Date) .5 Explain the importance of isolating the following at the scene: [ref. a] a. Electrical power [sec. 7] b. Mechanical systems [sec. 10] ___________________________________ (Signature and Date) .6 Discuss the methods of cooling the boundary area to reduce the intensity of a fire.

[ref. a, sec. 7] ___________________________________ (Signature and Date) .7 What are the proper procedures for reporting a fire or other casualty? [ref. a, sec. 8] ___________________________________ (Signature and Date) .8 Discuss the procedures and limitations of the Thermal Imager. [ref. a, sec. 6] ___________________________________ (Signature and Date) .9 Discuss the following as applied to fires and firefighting: a. Conditions that must exist for spontaneous combustion to take place

[ref. b, ch. 4] b. Four classes of fires and how each class of fire is extinguished [ref. a, sec. 1] c. Three ways heat can be transmitted [ref. a, sec. 1] d. Use of horizontal and vertical fire boundaries to control the spread of fire

[ref. a, sec. 7] e. Use of smoke boundaries [ref. a, sec. 7] f. Smoke curtains/blankets [ref. a, sec. 7] g. Use of positive and negative ventilation [ref. a, sec. 10] . ___________________________________ (Signature and Date)

28

103 FIREFIGHTING FUNDAMENTALS (CONT’D) 103.10 Discuss the direct and indirect methods of firefighting. [ref. a, sec. 7] ___________________________________ (Signature and Date) .11 Discuss the procedure of fire venting. [ref. a, sec. 7] ___________________________________ (Signature and Date) .12 Discuss the procedure of active desmoking. [ref. a, sec. 7] ___________________________________ (Signature and Date) .13 Define the following: [ref. a, Glossary] a. Smoke control zone b. Buffer zone ___________________________________ (Signature and Date) .14 Describe the procedures for vertical trunk access. [ref. a, sec. 7] ___________________________________ (Signature and Date) .15 Discuss the procedures for attack from above (inclined descent). [ref. a, sec. 7] ___________________________________ (Signature and Date) .16 Discuss the procedures for multiple attack team hose lines. [ref. a, sec. 7] ___________________________________ (Signature and Date) .17 Discuss the firefighting procedures involving ordnance. [ref. c, ch. 2] ___________________________________ (Signature and Date) .18 Discuss the procedures for desmoking by using vari-nozzles. [ref. a, sec. 7] ___________________________________ (Signature and Date)

29

103 FIREFIGHTING FUNDAMENTALS (CONT’D) 103.19 Discuss the procedures for desmoking by using ship’s CPS. [ref. a, sec. 7] ___________________________________ (Signature and Date) .20 Discuss the basic principles for overhauling a fire. [ref. a, sec. 7] ___________________________________ (Signature and Date) .21 Discuss the firefighting procedures to be followed in a CBR contaminated

environment. [ref. a, sec. 7] ___________________________________ (Signature and Date) .22 Discuss the unique fire hazards associated with main and auxiliary machinery

spaces. [ref. a, sec. 10] ___________________________________ (Signature and Date) .23 Discuss how the ship's Main Space Fire Doctrine assists in space isolation.

[ref. a, sec. 10] ___________________________________ (Signature and Date) .24 Discuss the hazards of saltwater-activated ordnance and flares. [ref. d, ch. 1] ___________________________________ (Signature and Date)

30

104 104 BASIC DAMAGE CONTROL (DC) FUNDAMENTALS References: [a] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [b] NTTP 3-20.31 (Rev. A), Surface Ship Survivability [c] OPNAVINST 3120.32C, Standard Organization and Regulations Manual of the U.S.

Navy (SORM) [d] NAVEDTRA 14057-PPR, Damage Controlman [e] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [f] Ship's Information Book (SIB) 104.1 What is the purpose of the watch, quarter, and station bill? [ref. c, ch. 6] ___________________________________ (Signature and Date) .2 Describe the following major components which makeup the ship's watertight hull

form: [ref. d, ch. 3] a. Keel b. Frames c. Hull plates d. Decks e. Bulkheads ___________________________________ (Signature and Date) .3 Discuss the four common types of closures that penetrate watertight boundaries.

[ref. d, ch. 3] ___________________________________ (Signature and Date) .4 Explain the method of compartment numbering used aboard U.S. Navy ships.

[ref. d, ch. 3] ___________________________________ (Signature and Date) .5 Define watertight integrity. [ref. b, ch. 1; ref. d, ch. 3; ref. e, sec. 21] ___________________________________ (Signature and Date)

31

104 BASIC DAMAGE CONTROL (DC) FUNDAMENTALS (CONT’D) 104.6 Define the following material conditions of readiness/special classifications and the

conditions under which watertight integrity may be broken: [ref. e, sec. 22] a. X-RAY b. YOKE c. ZEBRA d. Modified YOKE e. Circle X-RAY and YOKE f. Circle ZEBRA g. Dog ZEBRA h. WILLIAM i. Circle WILLIAM j. Modified ZEBRA k. Fire zone boundaries ___________________________________ (Signature and Date) .7 What is the DC Closure Log, where is it maintained, and what is the maximum

length of time a fitting may be logged open? [ref. e, sec. 22] ___________________________________ (Signature and Date) .8 What are the procedures to be followed when changing the material condition of

readiness? [ref. d, ch. 3] ___________________________________ (Signature and Date) .9 Explain the composition and use of a CCOL, master CCOL, duplicate CCOL, and

partial CCOL. [ref. e, sec. 21] ___________________________________ (Signature and Date) .10 Describe proper battle dress. [ref. b, ch. 8] ___________________________________ (Signature and Date) .11 Identify the type of firemain system aboard your ship. [ref. f] ___________________________________ (Signature and Date)

32

104 BASIC DAMAGE CONTROL (DC) FUNDAMENTALS (CONT’D) 104.12 Who gives the order to abandon ship? [ref. c, ch. 6] ___________________________________ (Signature and Date) .13 State the number and locations of your ship’s DCRS. [ref. f] ___________________________________ (Signature and Date) .14 Define the following: [ref. a, sec. 7] a. Primary fire boundary b. Secondary fire boundary c. Inner smoke boundary d. Outer smoke boundary e. Buffer zone ___________________________________ (Signature and Date) .15 What normally constitutes a fire boundary? [ref. a, sec. 7] ___________________________________ (Signature and Date) .16 What normally constitutes a smoke boundary? [ref. a, sec. 7] ___________________________________ (Signature and Date) .17 What normally constitutes a flooding boundary? [ref. e, sec. 42] ___________________________________ (Signature and Date) .18 State the reasons for establishing proper fire/flooding boundaries.

[ref. a, sec. 7; ref. e, sec. 42] ___________________________________ (Signature and Date) .19 Explain how pressure affects the rate of flooding. [ref. e, sec. 42] ___________________________________ (Signature and Date)

33

104 BASIC DAMAGE CONTROL (DC) FUNDAMENTALS (CONT’D) 104.20 Discuss the importance of securing the source of flooding. [ref. e, sec. 42] ___________________________________ (Signature and Date) .21 Discuss the reason for not securing an entire Firemain system to stop flooding

caused by a rupture in the system. [ref. a, sec. 2] ___________________________________ (Signature and Date)

34

105 105 FIRST-AID AND RESCUE FUNDAMENTALS References: [a] NAVEDTRA 14295, Hospital Corpsman [b] Ship’s Information Book (SIB) 105.1 State the purposes of first-aid. [ref. a, ch. 4] ___________________________________ (Signature and Date) .2 State the three basic rules for the treatment of soft tissue wounds. [ref. a, ch. 4] ___________________________________ (Signature and Date) .3 State the principles involved in dressing wounds to the following areas: [ref. a, ch. 4] a. Chest b. Head c. Abdominal ___________________________________ (Signature and Date) .4 Where are the major pressure points on the body located? [ref. a, ch. 4] ___________________________________ (Signature and Date) .5 Explain the three methods of controlling hemorrhage. [ref. a, ch. 4] ___________________________________ (Signature and Date) .6 What conditions warrants the use and application of a tourniquet? [ref. a, ch. 4] ___________________________________ (Signature and Date)

35

105 FIRST-AID AND RESCUE FUNDAMENTALS (CONT’D) 105.7 State the following as applied to a fracture: [ref. a, ch. 4] a. Difference between closed and open fractures b. How to immobilize a fracture using a splint c. Care of a person with a fractured spine __________________________________ (Signature and Date) .8 State the following as applied to respiratory arrest: [ref. a, ch. 4] a. Factors that can cause failure of the breathing mechanism b. Need for immediate treatment of patient c. Mouth-to-mouth method of artificial respiration d. Abdominal thrust technique (Heimlich maneuver) ___________________________________ (Signature and Date) .9 State the following as applied to shock: [ref. a, ch. 4] a. Definition of shock b. Most common causes of shock c. Symptoms of shock d. Procedures for treatment of a victim in shock ___________________________________ (Signature and Date) .10 What are the symptoms of the following heat casualties: [ref. a, ch. 4] a. Heat cramps b. Heat exhaustion c. Heat stroke ___________________________________ (Signature and Date) .11 What is the first-aid treatment for the following: [ref. a, ch. 4] a. Heat cramps b. Heat exhaustion c. Heat stroke ___________________________________ (Signature and Date)

36

105 FIRST-AID AND RESCUE FUNDAMENTALS (CONT’D) 105.12 What are the three degrees of burns and how are they determined? [ref. a, ch. 4] ___________________________________ (Signature and Date) .13 What are the treatments for the three degrees of burns and the method of

estimating the burn area? [ref. a, ch. 4] ___________________________________ (Signature and Date) .14 Explain each of the following stretchers and their use: [ref. a, ch. 3] a. Stokes b. Miller body boards/extraction splints c. Army litter ___________________________________ (Signature and Date) .15 State the location(s) of each kind of stretcher within or next to your divisional

spaces. [ref. b] ___________________________________ (Signature and Date) .16 What items could be used instead of stretchers? [ref. a, ch. 3] ___________________________________ (Signature and Date) .17 Identify the methods for moving an injured person. [ref. a, ch. 3] ___________________________________ (Signature and Date) .18 In terms of the rescuer’s safety, state the precautions to be taken for the following:

[ref. a, ch. 3] a. Removing a victim from an energized circuit b. Rescuing victim overcome by toxic fumes ___________________________________ (Signature and Date) .19 State the locations of first-aid boxes in your divisional spaces. [ref. b] ___________________________________ (Signature and Date)

37

105 FIRST-AID AND RESCUE FUNDAMENTALS (CONT’D) 105.20 How many battle dressing stations are on your ship, and where are they located?

[ref. b] ___________________________________ (Signature and Date) .21 State the locations of poison antidote lockers. [ref. b] ___________________________________ (Signature and Date)

38

106 106 CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE

FUNDAMENTALS References: [a] NTTP 3-20.31 (Rev. A), Surface Ship Survivability [b] NSTM S9086-CD-STM-010/CH-070R3, Nuclear Defense at Sea and Radiological

Recovery of Ships After Nuclear Weapons Explosion [c] NSTM S9086-QH-STM-010/CH-470R4, Shipboard BW/CW Defense and

Countermeasures [d] EE700-AD-LSS-010, User’s Logistic Support Summary (ULSS) for Multifunction

Radiac (MFR) Sets, AN/PDQ-1 and AN/PDQ-2 and Ancillary Probes [e] NAVMED P-5041, Treatment of Chemical Agent Casualties and Conventional Military

Chemical Injuries 106.1 Discuss the following terms associated with nuclear defense: a. Initial nuclear radiation [ref. b, sec. 1] b. Roentgen [ref. b, app. A] c. Rad [ref. b, app. A] d. Contamination [ref. b, app. A] e. Radiac [ref. b, app. A] f. Dosimeter [ref. b, app. A] g. MPE [ref. b, app. A] h. Casualty exposure [ref. b, app. A] i. Ready and deep shelter [ref. b, sec. 5, app. A] j. Casualty collection station [ref. c, sec. 7] k. CCA [ref. c, sec. 7] l. DECON station [ref. c, sec. 7] m. CMWD [ref. c, sec. 7] n. Flash blindness [ref. a, ch. 14] o. Base surge [ref. b, app. A] p. Flash burns [ref. a, ch. 14] q. EMP [ref. b, app. A] r. TREE [ref. b, app. A] s. Blackout [ref. b, app. A] t Blueout [ref. b, app. A] u. Air blast [ref. a, app. E] v. Rotating watch [ref. a, ch. 14] w. Dose and dose rate [ref. b, app. A] x. Residual radiation [ref. b, app. A] y. Nomograms [ref. b, sec. 2] z. Collective protection [ref. c, sec. 6] ___________________________________ (Signature and Date)

39

106 CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE

FUNDAMENTALS (CONT’D) 106.2 What markers are used to indicate nuclear contamination areas? [ref. b, sec. 3] ___________________________________ (Signature and Date) .3 Describe the three basic processes by which DECON is performed.

[ref. b, sec. 5; ref. c, sec. 7] ___________________________________ (Signature and Date) .4 Describe the following procedures: [ref. b, sec. 5; ref. c, sec. 7] a. Personnel DECON b. Material DECON ___________________________________ (Signature and Date) .5 Describe the following nuclear bursts: [ref. b, sec. 1] a. Air b. Surface c. Underwater ___________________________________ (Signature and Date) .6 What is the procedure for self-protection in the event of the following:

[ref. b, sec. 4; ref. c, sec. 5]

a. Chemical attack b. Biological attack c. Radiological attack d. Nuclear attack

___________________________________ (Signature and Date) .7 Discuss the following radiation surveys: [ref. b, sec. 3] a. Rapid internal b. Rapid (gross) external

40


FUNDAMENTALS (CONT’D) 106.7 c. Detailed d. On station e. Supplementary ___________________________________ (Signature and Date) .8 State how effective use of time, distance, and shielding minimize radiation dosage

to personnel. [ref. b, sec. 5] ___________________________________ (Signature and Date) .9 State the following characteristics of: [ref. b, sec. 1] a. Alpha radiation b. Beta radiation c. Gamma radiation d. Neutron radiation ___________________________________ (Signature and Date) .10 Discuss the use of the following radiological monitoring equipment: a. IM-270/PD [ref. b, sec. 3] b. MFR [ref. b, sec. 3; ref. d, ch. 1] c. DT-680 probe [ref. b, sec. 3; ref. d, ch. 1] d. BMMFR [ref. d, ch. 1] ___________________________________ (Signature and Date) .11 State the following as applied to biological warfare: [ref. c] a. Definition of biological agent [sec. 3] b. Means by which biological agents may enter the body [sec. 3] c. MOPP levels [sec. 8] d. Measures to be taken for self-protection during a biological attack [sec. 5] e. Markers used to indicate biological contaminants [sec. 7] f. Method used to decontaminate personnel and equipment [sec. 7] g. Methods by which BW agents are dispersed/delivered [sec. 3]

41


FUNDAMENTALS (CONT’D) 106.11 h. Methods used to detect and provide defense against BW agents [sec. 4] i. Methods used to collect biological samples [sec. 4] j. Collective protection [sec. 6] ___________________________________ (Signature and Date) .12 Discuss the use of the following biological detection equipment: [ref. c sec.4]

a. DFU b. HHA c. JBPDS

___________________________________ (Signature and Date) .13 State the following as applied to chemical warfare: [ref. c] a. Definition of chemical agent [sec. 2] b. Means by which chemical agents may enter the body [sec. 2] c. MOPP levels [sec. 8] d. Markers used to indicate chemical contamination [sec. 7] e. Methods used to decontaminate personnel and equipment [sec. 7] f. Methods by which CW agents are dispersed/delivered [sec. 3] g. Collective protection system [sec. 6] ___________________________________ (Signature and Date) .14 State the protective measures to be taken at each MOPP level.

[ref. b, sec. 6; ref. c, sec. 8] ___________________________________ (Signature and Date) .15 What are the physical symptoms of and treatment for: a. Blood agents [ref. c, sec. 2; ref. e, ch. 6] b. Blister agents [ref. c, sec. 2; ref. e, ch. 4] c. Nerve agents [ref. c, sec. 2; ref. e, ch. 2] d. Choking agents [ref. c, sec. 2; ref. e, ch. 5] e. Pathogens [ref. c, sec 3; ref. e, ch. 5] f. Toxins [ref. c, sec 3; ref. e, ch. 2] ___________________________________ (Signature and Date)

42


FUNDAMENTALS (CONT’D) 106.16 Discuss the use of the following chemical monitoring equipment: [ref. c, sec. 4] a. M-8 paper b. M-9 paper c. M-256/A-1 chemical detector d. IPDS/IPDS LR e. Phosgene gas Draeger detection tubes ___________________________________ (Signature and Date) .17 Discuss the function of the following items: a. Atropine [ref. e, ch. 2] b. 2-PAM-chloride/auto injector [ref. e, ch. 2] c. CANA [ref. e, ch. 2] d. MCU-2 series personal protective mask [ref. c, sec. 5] e. JSLST [ref. c, sec. 5] f. Chemical protective gloves (outer and inner) [ref. c, sec. 5] g. Chemical protective footwear covers [ref. c, sec. 5] h. Wet weather clothing [ref. c, sec. 5] i. M291 skin DECON kit [ref. c, sec. 7] j. RSDL [ref. c, sec. 7] j. NAPP tablets [ref. e, ch. 2] k. HHA’s Immunoassay strips [ref. c, sec 4] m. De-ionized water, phosphate buffered saline solutions (JBPDS) [ref. c, sec 4] ___________________________________ (Signature and Date)

43

107 107 DAMAGE CONTROL (DC) ORGANIZATION FUNDAMENTALS References: [a] NTTP 3-20.31 (Rev. A), Surface Ship Survivability [b] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [c] NSTM S9086-QH-STM-010/CH-470R4, Shipboard BW/CW Defense and

Countermeasures/CBR-D NEC 4805 [d] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [e] NAVEDTRA 14057-PPR, Damage Controlman [f] NSTM S9086-CD-STM-010/CH-070R3, Nuclear Defense at Sea and Radiological

Recovery of Ships After Nuclear Weapons Explosion 107.1 Discuss the duties of the following in the DC organization: a. DCO [ref. b, sec. 5; ref. f, sec. 1] b. DCA [ref. a, ch. 2] c. Fire Marshall [ref. b, sec. 5] d. Repair Party Leader [ref. a, ch. 9] e. Scene Leader [ref. a, ch. 9] f. Team Leader [ref. b, sec. 5] g. Repair Party Electrician [ref. e, ch. 2] h. Messenger [ref. e, ch. 2] i. Stretcher Bearer [ref. e, ch. 2] j. Accessman [ref. e, ch. 2] k. Boundaryman [ref. e, ch. 2] ___________________________________ (Signature and Date) .2 Explain the functions of the following team members: a. Investigator [ref. e, ch. 2] b. Plugman [ref. e, ch. 2] c. Nozzleman/hoseman [ref. e, ch. 2] d. Rapid response [ref. a, sec. 9] e. Emergency hull repair [ref. d, ch. 8] f. Dewatering [ref. c, sec. 29] g. Desmoking [ref. b, sec. 5] h. Material DECON [ref. c, sec. 7] i. Monitoring [ref. c, sec. 4] j. Personnel DECON [ref. c, sec. 7] k. Asssessment Team [ref. b, sec. 10] ___________________________________ (Signature and Date)

44

107 DAMAGE CONTROL (DC) ORGANIZATION FUNDAMENTALS (CONT’D) 107.3 Explain the function of DCTT. [ref. a, ch. 3] ___________________________________ (Signature and Date) .4 Explain the areas of responsibility for the following repair parties: a. Repair 1 [ref. a, sec. 2] b. Repair 2 [[ref. a, sec. 2] c. Repair 3 [ref. a, sec. 2] d. Repair 4 [ref. a, sec. 2] e. Repair 5 [ref. a, sec. 2] f. Repair 6 [ref. a, sec. 2] g. Repair 7 [ref. a, sec. 2] h. Repair 8 [ref. a, sec. 2] i. Aviation Fuel Repair Team [ref. a, sec. 2] j. Crash and Salvage Team [ref. a, sec. 2] k. Ordnance Disposal Team [ref. a, sec. 2] l. In-Port Emergency Team [ref. a, sec. 9]

m. At Sea Fire Party [ref. a, sec. 9] n. Rapid Response Team [ref. a, sec.9]

o. R and A Detail (in-port/at sea) [ref. a, sec. 2] p. Asssessment Team [ref. b, sec. 10] ___________________________________ (Signature and Date)

45

108 108 FIRE WATCH FUNDAMENTALS References: [a] NSTM S9086-CH-STM-030/CH-074V3R5, Gas Free Engineering 108.1 Define hot-work. [sec. 22] ___________________________________ (Signature and Date) .2 What are the precautions that must be observed prior to performing hot-work

operations? [sec. 22] ___________________________________ (Signature and Date) .3 What are the procedures that must be completed prior to performing hot-work in or

on compartments, tanks, voids, or piping systems near explosive materials, liquids, or vapors? [sec. 22]

___________________________________ (Signature and Date) .4 Discuss the post fire watch procedures. [sec. 22] ___________________________________ (Signature and Date) .5 What information is contained in a hot-work/gas-free certificate? [sec. 20] ___________________________________ (Signature and Date)

46

109 109 CONFLAGRATION FUNDAMENTALS References: [a] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [b] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [c] NAVAIR 00-80R-14, NATOPS, U.S. Navy Aircraft Firefighting and Rescue Manual [d] Ship’s Information Book (SIB) 109.1 Discuss major conflagration. [ref. a, sec. 8] ___________________________________ (Signature and Date) .2 What is a conflagration station? [ref. b, sec. 21] ___________________________________ (Signature and Date) .3 Discuss the relationship between conflagration stations, hangar deck control, and

DC central. [ref. a, sec. 2; ref. c, ch. 9] ___________________________________ (Signature and Date) .4 Describe the function of sprinkler groups. [ref. c, ch. 7] ___________________________________ (Signature and Date) .5 Discuss the locations of the following: [ref. d] a. Aircraft fueling stations b. O2N2 plants c. Boat fueling stations d. Vehicle fueling stations e. Hangar deck fire stations f. HAZMAT stowage area ___________________________________ (Signature and Date)

47

110 110 BATTLE DAMAGE REPAIR FUNDAMENTALS References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [b] NAVEDTRA 14057-PPR, Damage Controlman [c] NAVSEA S5090-CL-MMC-010, Pipe Jumper Hose System (PJHS) Kit No. 1 and No. 2 110.1 Generally, how may battle damage be classified? [ref. a, sec. 42] ___________________________________ (Signature and Date) .2 Discuss the two general methods of repairing holes. [ref. a, sec. 42] ___________________________________ (Signature and Date) .3 Discuss the methods of reinforcing beams and frames. [ref. a, sec. 42] ___________________________________ (Signature and Date) .4 Discuss the methods of reinforcing cracked machinery supports. [ref. a, sec. 42] ___________________________________ (Signature and Date) .5 Define the various types of ruptures that could occur to piping. [ref. a, sec. 42] ___________________________________ (Signature and Date) .6 Define shoring. [ref. a, sec. 43] ___________________________________ (Signature and Date) .7 Define the following: a. Direct compression (I-type) [ref. a, sec. 43] b. Preferred method of measuring shoring [ref. b, ch. 8] c. Strain on shoring [ref. a, sec. 43] d. Angle of shoring [ref. a, sec. 43] e. Shore [ref. b, ch. 8]

48

110 BATTLE DAMAGE REPAIR FUNDAMENTALS (CONT’D) 110.7 f. Wedge [ref. a, sec. 43] g. Shole [ref. b, ch. 8] h. Strongback [ref. b, ch. 8] ___________________________________ (Signature and Date) .8 Discuss the various types of patches that can be used to repair damaged piping.

[ref. a, sec. 42, ref. c] ___________________________________ (Signature and Date) .9 Discuss the use of plugs and wedges in plugging a hole. [ref. b, ch. 8] ___________________________________ (Signature and Date) .10 Discuss the use of patches in patching a hole. [ref. b, ch. 8] ___________________________________ (Signature and Date) .11 Describe the steps involved in the application of the following patches: a. Soft [ref. b, ch. 8] b. Jubilee [ref. b, ch. 8] c. EWARP [ref. b, ch. 8] d. Banding [ref. a, sec. 42] ___________________________________ (Signature and Date) .12 Describe the steps involved in erecting shoring by using wooden shores and a

framing square. [ref. a, sec. 43] ___________________________________ (Signature and Date) .13 Describe the steps involved in erecting shoring by using a shoring batten.

[ref. a, sec. 43] ___________________________________ (Signature and Date)

49

110 BATTLE DAMAGE REPAIR FUNDAMENTALS (CONT’D) 110.14 Describe the steps involved in shoring a watertight door/hatch. [ref. a, sec. 43] ___________________________________ (Signature and Date)

50

111 111 HAZARDOUS MATERIAL CONTROL AND MANAGEMENT (HMC&M)

PROGRAM FUNDAMENTALS References: [a] OPNAVINST 5100.19E, Vol. l, Navy Occupational Safety and Health (NAVOSH) Program

Manual for Forces Afloat [b] Local Ship’s Instructions [c] OPNAVINST 5100.19E, Vol. ll, Navy Occupational Safety and Health (NAVOSH)

Program Manual for Forces Afloat [d] OPNAVINST 5100.19E, Vol. lll, Navy Occupational Safety and Health (NAVOSH)

Program Manual for Forces Afloat 111.1 Discuss the following: a. HMC&M [ref. d, Glossary] b. HW [ref. d, Glossary] c. HM labeling requirements [ref. c, ch. C23] d. HW labeling requirements [ref. c, ch. C23] e. MSDS [ref. a, ch. B3] f. DOD HMIS [ref. d, Glossary] ___________________________________ (Signature and Date) .2 Discuss where the following documents are located? a. HMIS for MSDS [ref. a, ch. B3; ref. b] b. SHML [ref. a, ch. B3; ref. b] c. List of authorized HM storage locations [ref. b] d. HM inventory [ref. b] e. HMUG [ref. b] ___________________________________ (Signature and Date) .3 Discuss the duties and responsibilities of the: [ref. a, ch. B3] a. Safety Officer b. HM Coordinator c. Division Officer d. Work Center Supervisor e. Individual crew member ___________________________________ (Signature and Date)

51

111 HAZARDOUS MATERIAL CONTROL AND MANAGEMENT (HMC&M) PROGRAM FUNDAMENTALS (CONT’D)

111.4 Discuss the procedures for disposal of HW. [ref. a, ch. B3] ___________________________________ (Signature and Date) .5 What are the restrictions on the stowage of HMC&M in spaces? [ref. c, ch. C23] ___________________________________ (Signature and Date)

52

112 112 COMPUTER BASED DAMAGE CONTROL (DC) MANAGEMENT SYSTEM

AND SOFTWARE FUNDAMENTALS References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control 112.1 Discuss the features of the ADCS. [sec. 39] ___________________________________ (Signature and Date) .2 Discuss the features of the software: [sec. 39] a. DCAMS b. CCOL c. DCTMS ___________________________________ (Signature and Date)

53

113 113 INVESTIGATION FUNDAMENTALS References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [b] NAVEDTRA 14057-PPR, Damage Controlman [c] NTTP 3-20.31 (Rev. A), Surface Ship Survivability [d] Allowance Equipage List (AEL) 2-880044262, Kit, Investigator 113.1 Discuss the principles governing damage investigation. [ref. a, sec. 40] ___________________________________ (Signature and Date) .2 Discuss reasons investigators work in pairs. [ref. a, sec. 40] ___________________________________ (Signature and Date) .3 Describe obvious signs of damage. [ref. a, sec. 40] ___________________________________ (Signature and Date) .4 Describe indications of hidden damage. [ref. a, sec. 40] ___________________________________ (Signature and Date) .5 Discuss the procedures for reporting damage. [ref. a, sec. 40] ___________________________________ (Signature and Date) .6 Discuss the procedure of investigation for following: [ref. a, sec. 40] a. Torpedo hit b. Underwater penetration c. Compartment flooding ___________________________________ (Signature and Date)

54

113 INVESTIGATION FUNDAMENTALS (CONT’D) 113.7 Discuss the investigators' responsibilities with regard to boundaries. [ref. b] ___________________________________ (Signature and Date) .8 Discuss the primary means of communication between investigators and the

controlling station. [ref. c] ___________________________________ (Signature and Date) .9 Discuss the contents and purpose of the investigator's kit. [refs. b, d] ___________________________________ (Signature and Date)

55

114 114 STABILITY FUNDAMENTALS References: [a] NSTM S9086-CN-STM-010/CH-079V1R1, Damage Control-Stability and Buoyancy [b] NAVEDTRA 14057-PPR, Damage Controlman 114.1 Discuss the following terms as they relate to ship's stability: a. Buoyancy [ref. a, sec. 3] b. Center of buoyancy [ref. a, sec. 3] c. Center of gravity [ref. a, sec. 3] d. Righting arm [ref. a, sec. 3] e. Displacement [ref. a, sec. 3] f. Heel [ref. a, sec. 11] g. Roll [ref. a, sec. 11] h. List [ref. a, sec. 11] i. Trim [ref. a, sec. 7] j. Draft marks: [ref. a] 1. Navigational [sec. 13] 2. Mean [sec. 13] 3. Limiting [sec. 14] k. Freeboard/reserve buoyancy [ref. a, sec. 3] l. Free surface effect [ref. b, ch. 12] m. Free communication effect [ref. a, sec. 9] n. Solid flooding [ref. a, sec. 10] o. Clinometer [ref. a, sec. 16] p. Metacenter [ref. a, sec. 3] ___________________________________ (Signature and Date) .2 Discuss the effects on stability of: [ref. a] a. Weight additions above and below the center of gravity [sec. 1] b. Weight removals above and below the center of gravity [sec. 3] c. Weight shifts [sec. 5] ___________________________________ (Signature and Date) .3 Discuss counterflooding. [ref. a, sec. 17] ___________________________________ (Signature and Date)

56

114 STABILITY FUNDAMENTALS (CONT’D) 114.4 Explain the use of the liquid loading diagram. [ref. a, sec. 13] ___________________________________ (Signature and Date)

57

115 115 ELECTRICIAN ELECTRICAL FUNDAMENTALS References: [a] NAVEDTRA 14344, Electrician's Mate [b] NAVEDTRA 14173, NEETS Module 1--Introduction to Matter, Energy, and Direct

Current [c] NAVEDTRA 14174, NEETS Module 2--Introduction to Alternating Current and

Transformers [d] NAVEDTRA 14175, NEETS Module 3--Introduction to Circuit Protection, Control, and

Measurement [e] NAVEDTRA 14177, NEETS Module 5--Introduction to Generators and Motors [f] NSTM S9086-KC-STM-010/CH-300R7, Electric Plant-General [g] NSTM S9086-KN-STM-010/CH-310R3, Electric Power Generators and Conversion

Equipment [h] NSTM S9086-KY-STM-010/CH-320R6, Electric Power Distribution Systems [i] NSTM S9086-PA-STM-010/CH-430R2, Interior Communication Installations [j] Ship's Information Book (SIB) [k] NAVEDTRA 14150, Machinist’s Mate 1 & C 115.1 Explain the basic units of measure, symbols, or abbreviations for the following

terms: a. Capacitance [ref. c, ch. 3] b. Conductance [ref. a, app. I] c. Current [ref. a, app. I] d. Frequency [ref. a, ch. 3] e. Impedance [ref. c, ch. 4] f. Inductance [ref. c, ch. 3] g. Potential [ref. a, app. I] h. Power [ref. a, app. I] i. Resistance [ref. b, ch. 1] ___________________________________ (Signature and Date) .2 Discuss the applications and functions of the following switchboards: a. Action cutout [ref. i, app. I] b. Control board [ref. a, ch. 14] c. Main switchboard [ref. a, ch. 14] d. IC switchboard [ref. i, sec. 2] e. Local IC switchboard [ref. i, sec. 2] ___________________________________ (Signature and Date)

58

115 ELECTRICIAN ELECTRICAL FUNDAMENTALS (CONT’D) 115.3 Discuss the function of the following indicators: a. Ammeter [ref. d, app. I] b. Enunciator [ref. i, sec. 3] c. Auto start indicator [ref. f, sec. 2] d. Blown fuse indicator [ref. d, ch. 2] e. Frequency meter [ref. d, app. I] f. Ground indicator [ref. i, sec. 7] g. Wattmeter [ref. d, app. I] h. Megohmmeter [ref. d, app. I] i. Phase–sequence indicator [ref. c] j. Salinity indicator [ref. k, ch. 6] k. Stroboscope [ref. a, ch. 7] l. Synchronizing monitor [ref. a, ch. 8] m. Synchroscope [ref. a, ch. 3] n. Tachometer [ref. a, ch. 7] o. Voltmeter [ref. a, ch. 1] ___________________________________ (Signature and Date) .4 Define the following: a. Action cutout [ref. i, sec. 2] b. Alternating current [ref. c, ch. 1] c. Auto paralleling device [ref. h, sec. 1] d. Auto bus transfer [ref. h, sec. 1] e. Bus [ref. h, sec. 1] f. Bus tie [ref. a, ch. 3] g. Casualty power [ref. f, sec. 1] h. Conductor [ref. c, ch. 1] i. Distribution panel [ref. h, sec. 1] j. Direct current [ref. a, ch. 4] k. Droop [ref. a, app. l] l. Isochronous [ref. h, sec. 1] m. Kilowatt [ref. b, ch. 3] n. Load center [ref. h, sec. 1] o. Manual bus transfer [ref. a, ch. 3] p. Mimic bus [ref. h, sec. 1] q. Parallel circuit [ref. h, sec. 2] r. Polarity [ref. h, sec. 2] s. Prime mover [ref. a, ch. 5] t. Power factor [ref. c, ch. 4] u. Reverse power relay [ref. a, ch. 2] v. Rheostat [ref. a, app. l] w. Selective tripping [ref. a, ch. 2]

59

115 ELECTRICIAN ELECTRICAL FUNDAMENTALS (CONT’D) 115.4 x. Ship’s service diesel generator [ref. h, sec. 2] y. Ship’s service turbine generator [ref. h, sec. 1] z. Shore power [ref. a, ch. 3] aa. Solenoid [ref. a, ch. 5] ab. Split plant [ref. h, sec. 1] ac. Switchboard [ref. h, sec. 1] ad. Thermocouple [ref. a, app. l] ae. Ungrounded system [ref. a, ch. 1] af. Voltage regulator [ref. a, ch. 8] ag. GTG [ref. a, ch. 14] ah. PMA [ref. a, ch. 9] ai. Fault current detector [ref. a, ch. 2] aj. Over power [ref. a, ch. 2] ak. Load shed [ref. h, sec. 1] al. Current transformer [ref. h, sec. 1] am. Motor generator [ref. h, sec. 1] an. Static frequency converter [ref. h , sec. 1] ___________________________________ (Signature and Date) .5 Describe the applications of the following switches: a. Knife [ref. d, ch. 2] b. Toggle (SPST, SPDT, DPST, and DPDT) [ref. d, ch. 3] c. Push button [ref. d, ch. 2] d. Rotary snap [ref. i, sec. 3] e. Rotary selector [ref. i, sec. 3] f. Microswitch (precision snap-acting switch) [ref. d, ch. 3] g. Magnetically operated (relay, solenoid) [ref. d, app. l] h. Limit switch (mechanical, magnetic) [ref. a, ch. 2] ___________________________________ (Signature and Date) .6 Discuss the applications of the following circuit breakers: [ref. a, ch. 2] a. ACB b. AQB c. NQB d. ALB e. NLB ___________________________________ (Signature and Date)

60

115 ELECTRICIAN ELECTRICAL FUNDAMENTALS (CONT’D) 115.7 Explain Ohm's law as it pertains to circuits. [ref. a, app. l] ___________________________________ (Signature and Date) .8 Explain the following electromagnetic terms: a. Right/left-hand rule [ref. e, ch. 2] b. Rotating magnetic field [ref. e, ch. 3] c. Magnetic flux [ref. e, ch. 3] d. Self-induction [ref. c, ch. 2] e. Mutual inductance [ref. c, ch. 2] f. Residual magnetism [ref. b, ch. 1] ___________________________________ (Signature and Date) .9 Discuss the relationship between voltage and current in the primary and secondary

windings of a transformer. [ref. d, ch. 1] ___________________________________ (Signature and Date) .10 Describe the operation of the following types of ac generators: [ref. e, ch. 4] a. Rotating armature b. Rotating field ___________________________________ (Signature and Date) .11 Discuss the applications of the following ac motors: [ref. e] a. Induction [ch. 4] b. Synchronous [ch. 4] c. Series [ch. 1] ___________________________________ (Signature and Date) .12 Explain the difference between capacitive-start and repulsion-start ac motors.

[ref. e, ch. 4] ___________________________________ (Signature and Date)

61

115 ELECTRICIAN ELECTRICAL FUNDAMENTALS (CONT’D) 115.13 Discuss the procedures for rigging and unrigging: a. Casualty power [ref. h, sec. 15] b. Shore power [ref. a, ch. 12] ___________________________________ (Signature and Date) .14 Describe the operation of the following types of dc generators: [ref. e, ch. 1;

ref. g, sec. 1] a. Separately excited b. Self-excited c. Series d. Shunt ___________________________________ (Signature and Date) .15 Discuss the following types of dc motors and state applications for each:

[ref. e, ch. 2; ref. g, sec. 1] a. Shunt b. Series c. Compound ___________________________________ (Signature and Date) .16 Explain the meaning of the following terms associated with shipboard electrical

motor controllers: [ref. a] a. NO/NC [ch. 2] b. Contact (main/Aux) [ch. 5] c. Latching relay [ch. 5] d. OL protection [ch. 6] e. LVP [ch. 6] f. LVR/LVRE [ch. 6] g. Timing relay [ch. 2] h. Solid state relay [ch. 8] ___________________________________ (Signature and Date)

62

115 ELECTRICIAN ELECTRICAL FUNDAMENTALS (CONT’D) 115.17 Define electrochemical action. [ref. b, ch. 2] ___________________________________ (Signature and Date) .18 Explain the basic principle of electrical power generation. [ref. f; ref. g, sec. 1] ___________________________________ (Signature and Date) .19 Discuss what conditions must be met prior to paralleling ac generators.

[ref. g, sec. 1; ref. h, sec. 2] ___________________________________ (Signature and Date) .20 Discuss the applications of the following: [ref. i, sec. 7] a. Audible signal devices b. Visual indicators ___________________________________ (Signature and Date) .21 Discuss the following color codes associated with visual alarms and indicators:

[ref. i, sec. 1] a. Red b. White c. Blue d. Green e. Yellow f. Clear ___________________________________ (Signature and Date) .22 Explain the function of the following devices: a. Circuit breakers [ref. a, ch. 1] b. Fuse [ref. d, ch. 2]

63

115 ELECTRICIAN ELECTRICAL FUNDAMENTALS (CONT’D) 115.22 c. Ground detector lamps [ref. a, ch. 3] d. Motor [ref. e, app. l] e. Transformer [ref. a, ch. 3] ___________________________________ (Signature and Date) .23 Explain the ratings of the following: [ref. j] a. SSTG b. SSDG c. GTG d. EDG e. MG sets (60/400Hz) f. Static frequency converter ___________________________________ (Signature and Date) .24 Discuss which components use the following type of controllers: [ref. j] a. LVR b. LVP c. LVRE ___________________________________ (Signature and Date) .25 Explain the difference between selective and selected tripping. [ref. d, ch. 2] ___________________________________ (Signature and Date) .26 Describe the effects of a ground in a three-phase system. [ref. f, sec. 2] ___________________________________ (Signature and Date) .27 Discuss which in-space components are supplied with power from a(n): [ref. j] a. ABT b. MBT ___________________________________ (Signature and Date)

64

115 ELECTRICIAN ELECTRICAL FUNDAMENTALS (CONT’D) 115.28 Describe the effects of each of the following engineering spaces when it has been

electrically isolated: [ref. j] a. AMR b. Firerooms c. Enginerooms ___________________________________ (Signature and Date) .29 State the requirements for working on energized equipment [ref: f, sec 2] ___________________________________ (Signature and Date) .30 Discuss the identification markings for electrical power panels [ref: d, ch. 3] ___________________________________ (Signature and Date)

65

200 INTRODUCTION TO SYSTEMS

200.1 BASIC BUILDING BLOCKS

In this section, the equipment is broken down into smaller, more comprehensible, functional systems as basic building blocks in the learning process. Each system is written to reflect specific watchstation requirements by identifying the equipment most relevant to one or more designated watchstanders. The less complex systems may be identified and covered quickly or relegated to a lower priority to permit greater emphasis on more significant or complex systems.

200.2 COMPONENTS AND COMPONENT PARTS

For learning purposes each system is disassembled into two levels. Systems have components and components have parts. Do not expect to see every item which appears on a parts list to be in the PQS. Only those items which must be understood for operation/maintenance are listed. Normally a number of very broad (overview) systems are disassembled into their components or parts with the big picture as the learning goal. Items listed as components in such a system may then be analyzed as separate systems and broken down into components and parts. Example: the turbogenerators may be listed as a component of the Ship’s Service Electrical Distribution system and then later detailed as an individual system for closer study.

200.3 FORMAT

Each system is organized within the following format:

It lists the references to be used for study and asks you to explain the function of each system.

It asks for the static facts of what or where the components and component parts are in relation to the system.

It directs attention to the dynamics of how the component and component parts operate to make the system function.

It specifies the parameters that must be immediately recalled.

It requires study of the relationship between the system being studied and other systems or areas.


The systems you must complete are listed in the Prerequisites section of each watchstation. When you have mastered one or more systems, contact your Qualifier. The Qualifier will give you an oral examination on each system and, if satisfied you have sufficient knowledge of the system, will sign the appropriate system line items. You will be expected to demonstrate through oral or written examination a thorough understanding of each system required for your watchstation.

67

201 201 DAMAGE CONTROL (DC) COMMUNICATIONS SYSTEM References: [a] Ship's Information Book (SIB) [b] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [c] NTTP 3-20.31 (Rev. A), Surface Ship Survivability [d] NSTM S9086-PA-STM-000/CH-430R1, Interior Communications Installations [e] Ship’s Local Instruction 201.1 SYSTEM COMPONENTS AND COMPONENT PARTS

Referring to a standard print of this system or the actual equipment, identify the following system components and component parts and discuss the designated items for each: A. What is its function? B. Where is it located? C. What are the sources of power? D. What are the modes of operation or control? E. What are the safety/protective devices for this component/component part?

Questions

201.1.1 Sound-powered telephones: [ref. d, sec. 3] a. Sound-powered handset A B C b. Sound-powered headset (chest set-type) A B C .2 IVCS [ref. d, sec. 3] A .3 Ship's service telephone (J-DIAL) [ref. d, sec. 3] A .4 General announcing system [ref. a; ref. b, sec. 37; ref. d, sec. 4] A B .5 Wire free [ref. b, sec. 37] A B a. Base station cabinet [ref. a; ref. b, sec. 37] A B 1. Speaker [ref. b, sec. 37] A B 2. Microphone [ref. b, sec. 37] A B b. Base station unit [ref. a; ref. b, sec. 37] A B C D E 1. Battery charger [ref. a; ref. b, sec. 37] A B C 2. Signal relay [ref. a; ref. d, sec. 5] A B C c. Portable radios [ref. a; ref. b, sec. 37] A B C D 1. On/off volume control [ref. b, sec. 37] A B 2. Frequency select switch [ref. b, sec. 37] A B 3. DPL select switch [ref. b, sec. 37] A B 4. Squelch switch [ref. b, sec. 37] A B 5. Antenna [ref. b, sec. 37] A B 6. Battery status and transmit indicator [ref. b, sec. 37] A B

68

201 DAMAGE CONTROL (DC) COMMUNICATIONS SYSTEM (CONT’D)

Questions 201.1.6 PTT switch [ref. b, sec. 37] A B .7 Message blanks [ref. a; ref. c, ch. 4] A B .8 DC plates [ref. a; ref. c, ch. 3] A B ___________________________________ (Signature and Date) 201.2 PRINCIPLES OF OPERATION 201.2.1 What is the purpose of system redundancy in achieving the system's function?

[ref. b, sec. 37] ___________________________________ (Signature and Date) 201.3 PARAMETERS/OPERATING LIMITS 201.3.1 What is the maximum operating time of the rechargeable battery? [ref. b, sec. 37] .2 What is the maximum charging time of the rechargeable battery? [ref. b, sec. 37] ___________________________________ (Signature and Date) 201.4 SYSTEM INTERFACE 201.4.1 How does the loss of electrical power affect the operation of this system?

[ref. b, sec. 37] .2 What alternate means of communication are available to report damage to DC

central during a major conflagration? [ref. e] .3 How does the following outside influences affect the operation of this system:

[ref. b, sec. 44] a. EMCON b. RFI/EMP c. HERO ___________________________________ (Signature and Date)

69

201 DAMAGE CONTROL (DC) COMMUNICATIONS SYSTEM (CONT’D) 201.5 SAFETY PRECAUTIONS 201.5.1 What special safety precautions apply to wire free communications? [ref. b, sec. 44] ___________________________________ (Signature and Date)

70

202 202 EMERGENCY ESCAPE BREATHING DEVICE (EEBD) SYSTEM References: [a] NSTM S9086-CL-STM-010/CH-077R6, Personnel Protection Equipment [b] NH22505 R-E, OCENCO Technical Manual 202.1 SYSTEM COMPONENTS AND COMPONENT PARTS

Referring to a standard print of this system or the actual equipment, identify the following system components and component parts and discuss the designated items for each:

A. What is its function? B. Where is it located? C. What protection is provided by this component/component part? D. What are the probable indications if this component fails?

Questions

202.1.1 EEBD [ref. a, sec. 3] A B .2 OCENCO: a. Storage rack [ref. a, sec. 3] A B b. Storage case [ref. a, sec. 3] A B c. Carrying case [ref. a, sec. 3; ref. b] A B 1. Tamper seal [ref. b] A B 2. Gauge window [ref. a, sec. 3; ref. b] A B d. Teflon hood [ref. a, sec. 3; ref. b] A C e. Mouth piece [ref. a, sec. 3; ref. b] A B f. Nose clip [ref. a, sec. 3; ref. b] A B g. Breathing bag [ref. a, sec. 3; ref. b] A C D h. Relief valve [ref. b] A B C D i. Oxygen cylinder [ref. a, sec. 3; ref. b] A B 1. Pressure gage [ref. b] A B D 2. Oxygen regulator [ref. b] A B C D ___________________________________ (Signature and Date)

71

202 EMERGENCY ESCAPE BREATHING DEVICE (EEBD) SYSTEM (CONT’D) 202.2 PRINCIPLES OF OPERATION 202.2.1 How do the components work together to achieve the system’s function?

[ref. a, sec. 3] .2 What is the sequence of events for using an EEBD? [ref. a, sec. 3] ___________________________________ (Signature and Date) 202.3 PARAMETERS/OPERATING LIMITS

For the items listed, answer the following questions: [ref. a, sec. 3]

A. What are the normal operating parameters? B. What is the operational time limit?

Questions

202.3.1 EEBD (OCENCO) cylinder pressure A .2 EEBD B ___________________________________ (Signature and Date) 202.4 SYSTEM INTERFACE 202.4.1 How do variations in storage temperature affect the operation of this system?

[ref. a, sec. 4] .2 How does labored or heavy breathing affect the operating time of an EEBD? [ref. a,

sec. 3; ref. b] ___________________________________ (Signature and Date) 202.5 SAFETY PRECAUTIONS 202.5.1 What special safety precautions apply to: [ref. a, sec. 3] a. Removal of the EEBD hood b. EEBD usage ___________________________________ (Signature and Date)

72

203 203 SELF-CONTAINED BREATHING APPARATUS (SCBA) SYSTEM References: [a] NAVSEA S6226-PD-MMO-010/07070, Self-Contained Breathing Apparatus Breathing

Air Charging System (SCBA BACS) [b] NSTM S9086-CL-STM-010/CH-077R6, Personnel Protection Equipment 203.1 SYSTEM COMPONENTS AND COMPONENT PARTS

Referring to a standard print of this system or the actual equipment, identify the following system components and component parts and discuss the designated items for each: [ref. b, sec. 3]

A. What is its function? B. Where is it located? C. What are the probable indications if this component fails?

Questions

203.1.1 Air cylinder and valve assembly: a. Air cylinder A B C b. Cylinder valve A B C c. Cylinder pressure gauge A B C .2 Carrier and harness assembly: a. Back frame A B b. Cylinder retention system A B c. Flame and heat resistant harness A d. Remote pressure gauge A B e. Quick charge assembly A B C f. Regulator holder A B .3 Pressure reducing regulator: a. Pressure reducer hose coupling A B C b. First stage regulator A B C .4 Mask-mounted regulator (second-stage regulator) A B C a. Air-saver/donning switch A B C b. Purge valve/bypass valve A B C c. Unlocking/locking device A B C d. Heads up display A B C .5 Low pressure alarm A B .6 Face piece: a. Face piece seal A B C b. Lens A B C c. Nose cup A B C

73

203 SELF-CONTAINED BREATHING APPARATUS (SCBA) SYSTEM (CONT’D)

Questions 203.1.6 d. Head harness A B C e. Voicemitter A B C f. Voice amplifier A B C ___________________________________ (Signature and Date) 203.2 PRINCIPLES OF OPERATION 203.2.1 How do the components work together to achieve the system’s function?

[ref. b, sec. 3] .2 What are the SCBA donning procedures? [ref. b, sec. 3] .3 What is the sequence to activate the SCBA? [ref. b, sec. 3] .4 The air supply duration usually depends on what factors? [ref. b, sec. 3] .5 What indications will you receive if the system is malfunctioning? [ref. b, sec. 3] ___________________________________ (Signature and Date) 203.3 PARAMETERS/OPERATING LIMITS

For the items listed, answer the following questions: [ref. b, sec. 3]

A. What are the allowable operating limits? B. What is/are the indicators located? C. What is the alarm set point?

Questions 203.3.1 Cylinder A B C ___________________________________ (Signature and Date) 203.4 SYSTEM INTERFACE 203.4.1 How does this system interface with the recharging station? [ref. b, sec. 3]

74

203 SELF-CONTAINED BREATHING APPARATUS (SCBA) SYSTEM (CONT’D) 203.4.2 How do the following outside influences affect the operation of this system:

[ref. a, ch. 1; ref. b, sec. 3] a. Air quality testing b. Low or loss of HP air c. Personnel workload d. Loss of electrical power ___________________________________ (Signature and Date) 203.5 SAFETY PRECAUTIONS 203.5.1 What safety precautions must be observed when operating this system?

[ref. b, sec. 3] ___________________________________ (Signature and Date)

75

204 204 PERSONAL PROTECTIVE CLOTHING EQUIPMENT SYSTEM References: [a] NTTP 3-20.31 (Rev. A), Surface Ship Survivability [b] NSTM S9086-QH-STM-010/CH-470R4, Shipboard BW/CW Defense and

Countermeasures [c] NSTM S9086-CL-STM-010/CH-077R6, Personnel Protection Equipment 204.1 SYSTEM COMPONENTS AND COMPONENT PARTS



Questions 204.1.1 Battle dress/antiflash gear [ref. a, ch. 8; ref. c, sec. 5] A B .2 Helmets/cranials [ref. c, sec. 4] A B .3 Proximity suit [ref. c, sec. 4] A B .4 FFE [ref. c, sec. 4] A B a. Firefighter's coveralls A b. Firefighter's hood A c. DC/firefighter's helmet A d. Firefighter's gloves A e. Fireman's boots A .5 Advance chemical protective ensemble [ref. a, ch. 5] A B a. JSLIST [ref. b, sec. 5] A B b. Gloves [ref. b, sec. 5] A B c. Boots [ref. b sec. 5] A B .6 MCU-2/P [ref. b, sec. 5] A B C a. C-2 canister A B C b. Voice amp A B C .7 Wet weather clothing [ref. b, sec. 5] A B C ___________________________________ (Signature and Date)

76

204 PERSONAL PROTECTIVE CLOTHING EQUIPMENT SYSTEM (CONT’D) 204.2 PRINCIPLES OF OPERATION 204.2.1 How do the components work together to achieve the system’s function?

[ref. b, sec. 5] ___________________________________ (Signature and Date) 204.3 PARAMETERS/OPERATING LIMITS 204.3.1 What is the allowable wear-time for the JSLIST? [ref. b, sec. 5] .2 What is the allowable operational use of the C-2/C-2A1-canister? [ref. b, sec. 5] ___________________________________ (Signature and Date) 204.4 SYSTEM INTERFACE 204.4.1 How do the following outside influences affect the setting of MOPP levels aboard

ship: [ref. b, sec. 8] a. Area of known or suspected CBR threat b. Area of known or possible CBR threat c. CBR attack is probable d. CBR attack is imminent ___________________________________ (Signature and Date) 204.5 SAFETY PRECAUTIONS 204.5.1 What special safety precautions apply to using the following: a. Firefighting ensemble [ref. c, sec. 4] b. Proximity suit [ref. c, sec. 4] c. JSLIST [ref. b, sec. 5] d. C-2 canister [ref. b, sec. 5] ___________________________________ (Signature and Date)

77

205 205 WATERTIGHT CLOSURES/HULL FITTINGS SYSTEM References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [b] NAVEDTRA 14057-PPR, Damage Controlman [c] NAVSEA S9169-AW-DCB-010, Damage Control Watertight Closures Inspection,

Maintenance, and Repair Booklet [d] NSTM S9086-UF-STM-010/CH-600V1R3, Structural Closures [e] MAFO/Holtkamp Watertight Door Technical Manual 205.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. What are the probable indications if this component fails? C. What protection is provided by this component?

Questions

205.1.1 Watertight/airtight closures and fittings [ref. a, sec. 22; refs. d, e] A B C .2 Sounding tubes [ref. a, sec. 40] A B C .3 Ventilation closures [ref. a, sec. 22] A B C .4 Stuffing tubes [ref. a, secs. 22, 40] A B C .5 Armored/ballistic doors, hatches, and scuttles [ref. c, sec. 7; ref d] A B C .6 Overboard discharge [ref. a, sec. 29] A B C ___________________________________ (Signature and Date) 205.2 PRINCIPLES OF OPERATION 205.2.1 How do the components work together to achieve the system’s function?

[ref. a, sec. 22; refs. d, e] .2 What indications are received if the system is malfunctioning? [ref. a, sec. 40] ___________________________________ (Signature and Date) 205.3 PARAMETERS/OPERATING LIMITS – None to be discussed.

78

205 WATERTIGHT CLOSURES/HULL FITTINGS SYSTEM (CONT’D) 205.4 SYSTEM INTERFACE 205.4.1 How do the following outside influences affect the operation of this system: a. Lack of maintenance [ref. b, ch. 3]

b. Battle damage [ref. a, sec. 23] c. Weather [ref. b, ch. 3]

___________________________________ (Signature and Date) 205.5 SAFETY PRECAUTIONS 205.5.1 What safety precautions apply to: a. Hold-open devices for doors, hatches, scuttles, and portholes [ref. a, sec. 40] b. Soundings [ref. a, sec. 40] c. Balance armored hatches [ref. c, sec. 7] d. OOC/missing CPS door safety latch [ref.c, sec. 6] ___________________________________ (Signature and Date)

79

206 206 PORTABLE FIREFIGHTING EQUIPMENT SYSTEM References: [a] NSTM S9086-S3-STM-010/CH-555V1R13, , Surface Ship Firefighting [b] NAVEDTRA 14057-PPR, Damage Controlman 206.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the modes of operation or control? D. What are the probable indications if this component fails?

Questions

206.1.1 15-pound CO2: a. Squeeze grip release lever [ref. a, sec. 4] A b. D-yoke ring [ref. a, sec. 4] A B c. Locking pin and seal [ref. a, sec. 4] B d. Horn assembly [ref. b, ch. 5] B .2 Dry chemical extinguisher, 18- and 27-pound (PKP): [ref. a, sec. 4] a. CO2 cartridge A B b. Cartridge guard assembly B c. Pull pin/seal B d. Puncture lever A B e. Carry handle B f. Squeeze grip nozzle A B g. Fill cap B .3 Portable AFFF extinguisher [ref. a, sec. 4] B a. Pull pin/seal B b. Aerating nozzle B c. Pressure gage A B .4 Fire hose station [ref. a, sec. 4] A B D a. Vari-nozzle C .5 All-purpose nozzle [ref. a, sec. 4] A B C a. Applicator A .6 In-line eductor [ref. a, sec. 4] A D ___________________________________ (Signature and Date)

80

206 PORTABLE FIREFIGHTING EQUIPMENT SYSTEM (CONT’D) 206.2 PRINCIPLES OF OPERATION 206.2.1 What is the sequence of steps to operate the following: [ref. a, sec. 4] a. Portable CO2 extinguisher b. Portable PKP extinguisher c. Portable AFFF extinguisher d. In-line eductor ___________________________________ (Signature and Date) 206.3 PARAMETERS/OPERATING LIMITS

For the items listed, answer the following questions: [ref. a, sec. 4] A. How long will it last during continuous use? B. What is the effective range? C. What is the weight/capacity of the extinguishing agent inside the

extinguisher?

Questions 206.3.1 Portable 15-pound CO2 extinguisher A B C .2 Portable 18-pound PKP extinguisher A B .3 Portable 27-pound PKP extinguisher A B .4 Portable AFFF extinguisher A B C ___________________________________ (Signature and Date) 206.4 SYSTEM INTERFACE – None to be discussed. 206.5 SAFETY PRECAUTIONS 206.5.1 What safety precautions must be observed when using/handling: [ref. a, sec. 4] a. CO2 b. 27-pound and 18-pound PKP c. AFFF d. Fire hose e. Navy all-purpose nozzle f. Vari-nozzle ___________________________________ (Signature and Date)

81

207 207 PORTABLE DAMAGE CONTROL (DC) EQUIPMENT SYSTEM References: [a] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [b] Instruction Manual and Technical Manual Naval Fire Fighter's Thermal Imager

(THERMAL IMAGER) P4428 207.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the sources of power? D. What are the modes of operation or control? E. What are the safety/protective devices for this component/component part? F. What protection is provided by this component/component part? G. What are the probable indications if this component fails? H. What is the function of each position?

Questions

207.1.1 Thermal Imager [ref. a, sec. 6] A B C D E G H a. Battery condition indicator [ref. a, sec. 6] A b. Pan/chop mode button [ref. a, sec. 6] B c. Battery cartridge [ref. a sec. 6] A B E G d. Protective muff and visor [ref. b] A B F e. Voltage stabilizer [ref. b] A B G f. K90 [ref. b] A B C ___________________________________ (Signature and Date) 207.2 PRINCIPLES OF OPERATION 208.2.1 How do the components work together to achieve the system’s function?


82

207 PORTABLE DAMAGE CONTROL (DC) EQUIPMENT SYSTEM (CONT’D) 207.3 PARAMETERS/OPERATING LIMITS 207.3.1 What is the allowable operating time of the thermal imager? [ref. a, sec. 6] ___________________________________ (Signature and Date) 207.4 SYSTEM INTERFACE – None to be discussed. 207.5 SAFETY PRECAUTIONS 207.5.1 What safety precautions must be observed when operating the thermal imager?


83

208 208 INSTALLED FIRE EXTINGUISHING SYSTEM References: [a] Ship’s Damage Control Book [b] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [c] Ship's Information Book (SIB) [d] NAVSEA 0910-LP-038-0700, Halon/HFP Fire Extinguishing Components [e] NAVSEA 0993-LP-031-3000, CO2 Fixed Flooding 208.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the sources of power? D. What are the modes of operation or control? E. What are the indications if the component fails?

Questions

208.1.1 CO2 hose reel system [ref. a; ref. b, sec. 2; ref. c; ref. e, fig. 8-7] A B a. 50-pound CO2 cylinder/discharge head A B b. Hose reel A B .2 CO2 fixed flooding system [ref. a; ref. b, sec. 3] A B a. Pull box A B b. Cable operated control head A B c. 50-pound CO2 cylinder/flood valve A B d. Activation pressure switch A B e. Alarm indicators A B f. Ventilation pressure switch A B g. Discharge time delay A B .3 HALON/HFP 1301/HFP system [ref. a; ref. b, sec. 3] A B a. Five-pound CO2 actuation cylinder A B b. Pressure switches A B c. Alarm indicators A B d. Ventilation pressure switch A B e. Time delay device A B f. Time delay bypass valve A B g. Discharge pressure switch A B .4 Salt/fresh water sprinkling systems [ref. a; ref. b, sec. 3] B a. Magazine sprinkler system A .5 Freshwater hose reels [ref. b, sec. 3] B a. Activation push button A

84

208 INSTALLED FIRE EXTINGUISHING SYSTEM (CONT’D)

Questions 208.1.5 b. Holding tank A c. Hose reel nozzle B .6 APC extinguishing system (range guard) [ref. a; ref. b, sec. 3] A B a. Remote manual control box A B b. Pressure release control box A B c. Fusible links A B d. APC cylinder A B e. Lever control head A B f. Pressure switches A B .7 Steam smothering [ref. b, sec. 1] A B .8 Water mist pumping station components [refs. a, c] A E a. Water mist supply tank A B C b. Water mist pump A B C D E c. Primary and secondary supply/isolation valves A B C E d. Simplex strainer A B C E e. Bulkhead isolation valves A B E f. Primary and secondary high pressure water supply valves A B E g. Water mist piping A B C E h. Nozzles A B E .9 Engineroom Sprinkler system [refs. a, c] A B C D E a. Remote manual control box A B E _________________________________ (Signature and Date) 208.2 PRINCIPLES OF OPERATION 208.2.1 Using a diagram of this system, show the path of the agent from the activation

stations to the discharge nozzles for the following: [ref. b, sec. 3] a. Fixed CO2 systems b. HALON/HFP c. Saltwater d. Range guard (APC) e. Freshwater hose reel f. Watermist ___________________________________ (Signature and Date)

85

208 INSTALLED FIRE EXTINGUISHING SYSTEM (CONT’D) 208.3 PARAMETERS/OPERATING LIMITS

For the items listed, answer the following questions: [ref. a]

A. What is the normal operating value? B. What are the allowable operating limits?

Questions

208.3.1 Watermist system pressure A B .2 Watermist FWD tank capacity A B .3 Watermist AFT tank capacity A B ___________________________________ (Signature and Date) 208.4 SYSTEM INTERFACE 208.4.1 How does the loss of electrical power effect the operation of the HALON/HFP

system? [ref. d, ch. 5] ___________________________________ (Signature and Date) 208.5 SAFETY PRECAUTIONS 208.5.1 What safety precautions must be observed when operating this system?

[ref. b, sec. 2-3] ___________________________________ (Signature and Date)

86

209 209 AQUEOUS FILM FORMING FOAM (AFFF) SYSTEM References: [a] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [b] S9555-B9-MMA-010, Aqueous Film Forming Foam Equipment [c] Ship's Information Book (SIB) [d] Ship’s Damage Control Book [e] NSTM S9086-CH-STM-030/CH-074V3R6, Gas Free Engineering 209.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the sources of power? D. What are the modes of operation or control? E. What are the probable indications if this component fails?

Questions

209.1.1 AFFF systems: a. Hose reel cutout valve [refs. c, d] B b. Hose reel/stations [ref. a, sec. 3; refs. c, d] A B c. Vari-nozzle [ref. a, sec. 4] A d. AFFF concentrate service tank [ref. a, sec. 3; refs. c, d] A B e. AFFF tank fill connection/valve [refs. c, d] A B f. Tank level indicator [refs. c, d] A B g. Hytrol/hycheck valve [ref. a, sec. 3; refs. c, d] A B C E h. Powertrol/power check valve [ref. a, sec. 3; refs. c, d] A B C E i. SOPV [ref. a, sec. 3, fig. 3-10; refs. c, d] A B C D j. Remote operation control switch [ref. a. sec. 2; refs. c, d] A B E k. AFFF concentrate transfer main cutout valves

[ref. a, sec. 2; refs. c, d] A B E l. AFFF concentrate supply cutout valves

[ref. a, sec. 2; refs. c, d] A B E m. Power panel/ABT [ref. a, sec. 3; refs. c, d] A B C D E n. Firemain cutout valve [ref. a, sec. 2; refs. c, d] A B o. Gages [ref. a, sec. 2; refs. c, d] A B p. Tank vent [ref. a, sec. 3; refs. c, d] A B q. Riser/system drain valves [ref. a, sec. 3; refs. c, d] A B r. Riser cutout valves [ref. a, sec. 2; refs. c, d] A B E s. Y-strainer [ref. a, sec. 2; refs. c, d] A B E t. Barrel Cut-Out switch [ref. b] A B E

87

209 AQUEOUS FILM FORMING FOAM SYSTEM (CONT’D)

Questions 209.1.2 Installed FP-180 [ref. a, sec. 3; refs. c, d] A B C D E a. Manual control valve [ref. a, sec. 2; refs. c, d] A B .3 HCFF two-speed system: a. Two-speed pump with motor [ref. a, sec. 3; refs. c, d] A B C D E b. Sprinkler group control valves/groups [ref. a, sec. 2; refs. c, d] A B C E .4 Flight deck AFFF injection system: a. Injection pump/motor [ref. a, sec. 3; refs. c, d] A B b. Gallery deck injection stations [refs. c, d] B c. Hydraulically operated 2½-inch check valve [refs. c, d] B d. Gallery deck bypass cutout valve [refs. c, d] B e. Flush deck nozzle cutout [ref a sec 2; refs. c, d] A B f. Deck edge nozzle cutout valve [ref. a, sec. 2; refs. c, d] A B .5 Balanced pressure proportioner system: [ref. a, sec. 3; refs. c, d] a. Concentrate pump A B C E b. AFFF proportioner/venturi A B E c. Balancing valve A B E .6 Installed in-line eductor (MCM/MHC/PC class) [ref. b, sec. 4; refs. c, d] A B E a. Manual control valve [ref. a, sec. 2; refs. c, d] A B E b. Hose reel activation valve [ref. a, sec. 3; refs. c, d] A B E c. Sprinkler activation valve [ref. a, sec. 2; refs. c, d] A B E .7 AFFF transfer main system: a. AFFF reserve tank [ref. a, sec. 3; refs. c, d] A B b. AFFF transfer pump/motor [ref. a, sec. 3; refs. c, d] A B C E c. AFFF remote reserve TLI [ref. a, sec. 3; refs. c, d] A B d. AFFF transfer main isolation valves [ref. a, sec. 2; refs. c, d] A B E ___________________________________ (Signature and Date) 209.2 PRINCIPLES OF OPERATION 209.2.1 How do the components work together to achieve the system’s function?

[ref. a, sec. 2] .2 Draw a diagram of this system. [refs. c, d] .3 Using a diagram of this system, show the path of: [refs. c, d] a. AFFF concentrate from the tank to the discharge outlet b. Seawater from the firemain root valve to the discharge outlet c. AFFF reserve concentrate from the tank to the receiving station d. AFFF concentrate in recirculation mode

88

209 AQUEOUS FILM-FORMING FOAM SYSTEM (CONT’D) 209.2.4 What indications will you receive in the event of the loss of AFFF concentrate?

[ref. b, sec. 6] ___________________________________ (Signature and Date) 209.3 PARAMETERS/OPERATING LIMITS 209.3.1 What is the allowable operating limit of the AFFF firemain pressure? [refs. c, d] .2 What is the maximum capacity of the AFFF station tank? [refs. c, d] .3 What is the maximum capacity of the AFFF storage/transfer tank? [refs. c, d] ___________________________________ (Signature and Date) 209.4 SYSTEM INTERFACE 209.4.1 How do the following outside influences affect the operation of this system:

[ref. b, sec. 6] a. Loss of firemain b. Loss of electrical power c. Improper valve alignment ___________________________________ (Signature and Date) 209.5 SAFETY PRECAUTIONS

209.5.1 What safety precautions apply to: [ref.e, sec. 19] a. Hydrogen sulfide (H2S) exposure b. Hearing protection _________________________________ (Signature and Date)

89

210 210 FIREMAIN SYSTEM References: [a] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [b] NSTM S9086-QH-STM-010/CH-470R4, Shipboard BW/CW Defense and

Countermeasures [c] Ship's Information Book (SIB) [d] Ship’s Damage Control Book [e] NAVEDTRA 14057-PPR, Damage Controlman 210.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located within your assigned berthing compartment and

workstation? C. Where is it located on your ship? D. What are the modes of operation or control? E. What is the function of each position?

Questions

210.1.1 Fire pumps [ref. a, sec. 2; refs. c, d] A C D .2 Firemain piping [ref. a, sec. 2; ref. c] A C .3 Firemain cutout valves [ref. a, sec. 2; ref. c] A B C D Firemain control valves/unloader [ref a. sec 2; ref c] A B C D .4 Fire station: a. Fireplug [ref. a, sec. 4; refs. c, d] A B b. Wye-gate [ref. a, sec. 4; ref. d] A B c. Spanner wrench [ref. a, sec. 4] A B d. 1 ½-inch fire hose [ref. a, sec. 4; ref. d] A B C e. 1 ¾-Iinch hose [ref. a, sec. 4; ref. d] A B C f. 2 ½-inch fire hose [ref. a, sec. 4; ref. d] A B C g. 1 ½-inch vari-nozzle [ref. a, sec. 4; ref. d] A B C E h. 2 ½-inch vari-nozzle [ref. a, sec. 4; ref. d] A C E .5 CMWD system [ref. b, sec. 7; refs. c, d] A C D a. Cutout valves [refs. c, d] A C D b. SOPVs [refs. c, d] A C D c. Nozzles [refs. c, d] A C

90

210 FIREMAIN SYSTEM (CONT’D)

Questions 210.1.6 Magazine sprinkling system [ref. a, sec. 3; refs. c, d; ref. e, sec. 6] A C D a. Valves [ref. a, sec. 3; ref. c; ref. e, ch. 6] A C D b. Manual control valves [ref. a, sec. 4; ref. c] A C c. Nozzles [ref. c; ref. e, ch. 6] A C ___________________________________ (Signature and Date) 210.2 PRINCIPLES OF OPERATION 210.2.1 How do the components work together to achieve the system’s function?

[ref. a, sec. 2] .2 Draw a diagram of your ship’s Firemain system. [refs. c, d] ___________________________________ (Signature and Date) 210.3 PARAMETERS/OPERATING LIMITS

For the items listed, answer the following questions:

A. What is the normal operating value? B. What are the allowable operating limits? C. What is/are the physical location(s) of the indicator(s)? D. What is the standard size?

Questions

210.3.1 Firemain pressure [ref. a, sec. 2; refs. c, d] A B C .2 Fire hose length [ref. a, sec. 4] D ___________________________________ (Signature and Date) 210.4 SYSTEM INTERFACE 210.4.1 How do the auxiliary systems effect the operation of this system? [ref. a, sec. 2] ___________________________________ (Signature and Date) 210.5 SAFETY PRECAUTIONS – None to be discussed.

91

211 211 ACCESS/OVERHAUL EQUIPMENT SYSTEM References: [a] S6290-AQ-MMC-010/09687, The Arcair Slice (PECU) Portable Exotherimic Cutting

Unit [b] Manufacturer's Technical Manual for Portable Hydraulic Access and Rescue System

(PHARS) [c] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [d] Power Hawk Manufacturer’s Technical Manual 211.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the sources of power? D. What accessories are commonly used with this component part?

Questions

211.1.1 Access and overhaul hand tools [ref. c, sec. 7] A B .2 PHARS [ref. b] A B C D .3 PECU [ref. a, ch. 1] A B C D .4 Vari-nozzle [ref. c, sec. 7] A 5 Power Hawk [ref. d] A B C ___________________________________ (Signature and Date) 211.2 PRINCIPLES OF OPERATION – None to be discussed. 211.3 PARAMETERS/OPERATING LIMITS – None to be discussed. 211.4 SYSTEM INTERFACE – None to be discussed.

92

211 211 ACCESS/OVERHAUL EQUIPMENT SYSTEM (CONT’D) 211.5 SAFETY PRECAUTIONS 212.5.1 What safety precautions must be observed when operating the following: a. PHARS [ref. b, ch. 1] b. PECU [ref. a, sec. 1] c. Power Hawk [ref d] ___________________________________ (Signature and Date)

93

212 212 VENTILATION SYSTEM References: [a] NSTM S9086-RQ-STM-010/CH-510R7, Heating, Ventilating, and Air Conditioning

Systems for Surface Ships [b] Ship’s Damage Control Book [c] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [d] NSTM S9086-RS-STM-010/CH-512R2, Fans [e] Technical Manual, Model WF-20 RAMFAN/Model RAMFAN 2000 [f] Ship’s Information Book (SIB) [g] S9512-CA-MMC-010/93457, Fan, Portable, Desmoking, Medium Capacity 212.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the sources of power? D. What protection is provided by this component/component part?

Questions

212.1.1 Supply ventilation [ref. a, sec. 1; ref. f] A B C .2 Exhaust ventilation [ref. a, sec. 1; ref. f] A B C .3 Air-conditioning/recirculation ventilation [ref. a, sec. 1; ref. f] A B C .4 Grease interceptor hood (Gaylord) [ref. a, sec. 7] A B .5 Ventilation fans [ref. a, sec. 4; ref. f] A B C .6 Ventilation closures [ref. a, sec. 2; ref. b, ch. 3; ref. f] A B C D .7 Vent screens [ref. d, secs. 1, 2] A B .8 Air filters [ref. a, sec. 4; ref. b, ch. 3] A B .9 Ramfan [ref. b, ch. 5] A B C .10 Portable electric desmoking fan (box fan) [ref. b, ch. 5] A B C .11 Portable ventilation duct (elephant trunk) [ref. b, ch. 3; ref. c, sec. 7] A B .12 Smoke ejection system [ref. c, sec. 7] A B C D ___________________________________ (Signature and Date) 212.2 PRINCIPLES OF OPERATION – None to be discussed.

94

212 VENTILATION SYSTEM (CONT’D) 212.3 PARAMETERS/OPERATING LIMITS 212.3.1 What is the air moving capacity of the ramfan and box fan?

[ref. e, sec. 7; ref. g, sec. 1] ___________________________________ (Signature and Date) 212.4 SYSTEM INTERFACE 212.4.1 How do the following outside influences affect the operation of this system: a. Loss of firemain [ref. e, sec. 1]

b. Particulate matter [ref. e, sec. 4] c. Loss of electrical power [ref. d, secs. 1, 2] d. Loss of supply air [refs. a, g]

.2 How does this system interface with the collective protection system? [ref. c, sec. 7] ___________________________________ (Signature and Date) 212.5 SAFETY PRECAUTIONS 212.5.1 What special safety precautions apply to: a. Securing ventilation for a fire [ref. c, sec. 7] b. Desmoking a compartment [ref. c, sec. 7] c. Operating installed ventilation [ref. c, ch. 10] d. Operating a ramfan [ref. e, ch. 4] e. Operating a box fan [ref. d, sec. 1] ___________________________________ (Signature and Date)

95

213 213 INSTALLED DRAINAGE SYSTEM References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control Practical Damage [b] Ship's Damage Control Diagrams [c] NSTM S9086-T8-STM-010/CH-593R5, Pollution Control [d] Engineering Operational Sequencing System (EOSS) [e] NSTM S9086-RJ-STM-000/CH-504R5, Pressure, Temperature, and other Mechanical

and Electromechanical Measuring Instruments [f] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting 213.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the modes of operation or controls?

Questions

213.1.1 Main drainage system [ref. a, sec. 29; ref. b] A B a. Pumps/eductors [ref. a, sec. 29; ref. b] A B C b. Valves and piping [ref. a, sec. 29; ref. b] A B C c. Remote operators [ref. a, sec. 24; ref. b] A B C d. Gages [ref. b; ref. e, sec. 2] A B .2 Secondary drainage system [ref. a, sec. 29; ref. b] A B a. Pumps/eductors [ref. a, sec. 29; refs. b, d] A B C b. Valves and piping [ref. a, sec. 29; refs. b, d] A B C c. Remote operators [ref. a, sec. 24; ref. b] A B C d. Gages [ref. b; ref. e, sec. 2] A B .3 Gravity drains [ref. a, sec. 29] B a. Plumbing and deck drains [ref. a, sec. 29] A b. Deck drain valves and overboard discharge [ref. a, sec. 29] A ___________________________________ (Signature and Date)

96

213 INSTALLED DRAINAGE SYSTEM (CONT’D) 213.2 PRINCIPLES OF OPERATION 213.2.1 How do the components work together to achieve the system’s function?

[ref. a, sec. 29] .2 What is the proper step-by-step procedure for operating an eductor? [ref. d] ___________________________________ (Signature and Date) 213.3 PARAMETERS/OPERATING LIMITS – None to be discussed. 213.4 SYSTEM INTERFACE 213.4.1 How do the following outside influences affect the operation of this system: a. Loss of firemain pressure [ref. f, sec. 2] b. Loss of electrical power [ref. f, sec. 2] c. Battle damage [ref. a, sec. 29] .2 How does this system interface with the Firemain system? [ref. a, sec. 29] ___________________________________ (Signature and Date) 213.5 SAFETY PRECAUTIONS 213.5.1 What safety/environmental precautions must be observed when discharging fluids

overboard? [ref. c, sec. 3] .2 What are the dangers of: [ref. a, sec. 29] a. Improper operation of an installed eductor b. Operating an eductor in an enclosed space ___________________________________ (Signature and Date)

97

214 214 CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DETECTION AND

DECONTAMINATION EQUIPMENT SYSTEM References: [a] NTTP 3-20.31 (Rev. A), Surface Ship Survivability [b] NSTM S9086-CD-STM-000/CH-070R4, Nuclear Defense At Sea and Radiological

Recovery of Ships After Nuclear Weapons Explosion [c] NSTM S9086-QH-STM-010/CH-470R4, Shipboard BW/CW Defense and

Countermeasures [d] EE700-AD-LSS-010, User’s Logistic Support Summary (ULSS) for Multifunction

Radiac (MFR) Sets, AN/PDQ-1 and AN/PDQ-2 and Ancillary Probes [e] NAVMED P-5041, Treatment of Chemical Agent Casualties and Conventional Military

Chemical Injuries [f] NAVEDTRA 14057-PPR, Damage Controlman 214.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the sources of power? D. What are the modes of operation or control? E. What are the safety/protective devices for this component/component part? F. What are the probable indications if this component fails?

Questions

214.1.1 MFR [ref. e] A B C D E F .2 AN/PDQ-1 [ref. c, sec. 3] A B C D F .3 IM-270 [ref. c, sec. 3] A B .4 M256 chemical agent detection kit [ref. c, sec. 4] A B E .5 M8/M9 detector paper [ref. c, sec. 4] A B E .6 IPDS/IPDS LR [ref. b, sec. 4; ref. d, ch. 9] A B C D E F .7 DFU/HHA [ref. c, sec 4] A B C D E F .8 JPBDS [ref. c, sec 4] A B C D E F .9 Calcium hypochlorite (HTH) [ref. c, sec. 7] A B E F .10 Trash cans with liners [ref. c, sec. 7] A B .11 DECON cabinet [ref. c, sec. 7] A B .12 Clean clothing [ref. c, sec. 7] A B .13 Clean towels [ref. c, sec. 7] A B

98

214 CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DETECTION AND

DECONTAMINATION EQUIPMENT SYSTEM (CONT’D)

Questions 214.1.14 M291 skin DECON kit [ref. c, sec. 7] A B .15 Buckets/brushes/swabs [ref. c, sec. 7] A B .16 Fire hosing (fire hose with nozzle) [ref. c, sec. 7] A B .17 DECON/detergent solutions [ref. c, sec. 7] A B .18 Contamination markers [ref. c, sec. 7] A B .19 Unexploded munitions marker [ref. a, ch. 11] A B .20 Atropine, 2-PAM-chloride (CANA auto injectors) [ref. c, sec. 5; ref. f, ch. 2] A B E .21 Nerve agent pyridostigmine bromide pretreatment [ref. f, ch. 2] A B .22 Ready shelter station [ref. b, sec. 5] A B .23 Deep shelter station [ref. b, sec. 5] A B .24 Personnel DECON station [ref. c, sec. 7] A B .25 CCA [ref. c, sec. 7] A B .26 Casualty collection station(s) [ref. c, sec. 7] A B .27 Battle dressing station(s) [ref. a, ch. 2] A B .28 CMWD [ref. c, sec. 7] A B C D E F .29 Casualty DECON station [ref. c, sec. 6] A B D E F .30 RSDL [ref. c, sec. 6] A B E F ___________________________________ (Signature and Date) 214.2 PRINCIPLES OF OPERATION 214.2.1 Describe the procedures for using the following: a. Personnel DECON in the DECON station/CCA [ref. b, sec. 5] b. Topside DECON of a weather deck [ref. c, sec. 7] c. Interior DECON of a space [ref. b, sec. 5] d. Reading an IM-270 pocket dosimeter [ref. c, sec. 3] .2 What DECON solution can be used aboard ship in place of calcium HTH?

[ref. c, sec. 7] ___________________________________ (Signature and Date) 214.3 PARAMETERS/OPERATING LIMITS – None to be discussed.

99

214 CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DETECTION AND

DECONTAMINATION EQUIPMENT SYSTEM (CONT’D) 214.4 SYSTEM INTERFACE 214.4.1 How do the following outside influences affect the operation of this system? a. Loss of ship’s electrical power to: 1. IPDS/IPDS LR [ref. c, sec. 4] 2. JBPDS [ref. c, sec. 4] 3. DFU [ref. c, sec. 4] 4. CMWD [ref. c, sec. 7] 5. CPS [ref. c, sec. 6] b. Rain and sunlight exposure to M256A-1 [ref. c, sec. 4] c. Loss of firemain [ref. c, sec. 7] d. Material DECON of absorbent materials (i.e. rope and canvas, snow and ice)

on the weather decks [ref. b, sec. 3] e. Loss of CPS zone [ref. b, sec. 4] 1. CCA [ref. c, sec. 7] 2. Casualty collection station [ref. c, sec. 7] ___________________________________ (Signature and Date) 214.5 SAFETY PRECAUTIONS 214.5.1 What special safety precautions apply to: a. Radiac monitoring [ref. c, sec. 3] b. Chemical agent detection with M-256 [ref. c, sec. 4] c. Chemical agent detection with M-9 par [ref. c, sec. 4] d. M291 kit around eyes and mouth [ref. c, sec. 7] e. Washing down contamination on the weather decks [ref. c, sec. 7] f. Performing interior DECON [ref. b, sec. 5] g. NAPP [ref. f, ch. 2] h. Atropine/2-PAM-chloride and CANA auto-injectors [ref. f, ch. 2] i. M-256A1 chemical detection kit [ref. c, sec. 4] j. Mixing HTH with other DECON solutions [ref. c, sec. 7] k. Biological detection with the DFU [ref. c, sec. 4] l. Chemical detection with the DFU [ref. c, sec. 4] m. Handling/shipping potential biological contaminated samples. [ref. c, sec. 4] n. Biological detection with a JBPDS [ref c, sec. 4] ___________________________________ (Signature and Date)

100

215 215 CASUALTY POWER DISTRIBUTION SYSTEM References: [a] NSTM S9086-CN-STM-030/CH-079V3R2, Damage Control, Engineering Casualty

Control [b] NSTM S9086-KY-STM-010/CH-320R6, Electrical Power Distribution Systems [c] Ship's Information Book (SIB) [d] Ship’s Casualty Power Doctrine 215.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located?

Questions

215.1.1 Portable cables [ref. a, sec. 47; ref. b, sec. 1; ref. c] A B a. Phase identification markings [ref. a, sec. 47; ref. b, sec. 1] A B .2 Riser terminals [ref. b, sec. 1; ref. c] A B .3 Bulkhead terminals [ref. b, sec. 1; ref. c] A B .4 Switchboard terminals [ref. b, sec. 1; ref. c] A B .5 Casualty power circuit breaker [ref. b, sec. 1; ref. c] A B ___________________________________ (Signature and Date) 215.2 PRINCIPLES OF OPERATION 215.2.1 How do the components work together to achieve the system’s function?

[ref. b, sec. 2] .2 What is the sequence of component involvement to accomplish: [ref. a, sec. 47;

ref d] a. Rigging casualty power b. Securing casualty power c. Unrigging casualty power ___________________________________ (Signature and Date)

101

215 CASUALTY POWER DISTRIBUTION SYSTEM (CONT’D) 215.3 PARAMETERS/OPERATING LIMITS


A. What is the normal rating? B. What is the casualty power application rating?

Questions

215.3.1 Portable cable amperage [ref. a, sec. 47] A B .2 Casualty power circuit breaker amperage [ref. c] A ___________________________________ (Signature and Date) 215.4 SYSTEM INTERFACE – None to be discussed. 215.5 SAFETY PRECAUTIONS 215.5.1 What safety precautions must be observed when operating this system?


102

216 216 DEWATERING EQUIPMENT/PUMPS SYSTEM References: [a] NAVEDTRA 14057-PPR, Damage Controlman [b] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [c] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [d] Ship’s Damage Control Book 216.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the sources of power? D. What are the probable indications if this component fails? E What is the effect on system operation if this component fails?

Questions

216.1.1 Eductors (S-type, Peri-jet, Derbyshire) [ref. a, ch. 5; ref. d] A B C D a. Supply/discharge hoses [ref. a, ch. 5; ref. d] A B b. Overboard discharge fittings [ref. c, sec. 29; ref. d] A B .2 Electric submersible pump [ref. a, ch. 5; ref. d] A B C D a. Motor [ref. a, secs. 5, 26] A b. Electrical cable and switch box [ref. a, ch. 5] A c. Handling line [ref. a, ch. 5] A d. Strainers [ref. a, ch. 5] A e. Hoses [ref. a, ch. 5; ref. d] A B D .3 P-100 pump [ref. b, sec. 4; ref. d] A B D a. Exhaust primer valve A B D E b. Primer hose assembly A B D E c. Discharge valve and head assembly A B D E d. Primer shutoff valve A B D E e. Suction connection A B D E f. Pump drain valve A B D E g. Exhaust muffler A B h. Air cleaner assembly A B D E i. Fuel tank A B D E j. Starter assembly A B D E k. Throttle A B D E

103

216 DEWATERING EQUIPMENT/PUMPS SYSTEM (CONT’D)

Questions 216.1.3 l. Oil dipstick A B m. Packing adjustment plunger A B D E n. Pressure gage A B D E ___________________________________ (Signature and Date) 216.2 PRINCIPLES OF OPERATION 216.2.1 What is the sequence of component involvement to: [ref. a, chs. 4, 6] a. Use electrical submersible pumps in tandem

b. Increase the suction lift of the P-100 with eductor c. Increase dewatering capability using an eductor on discharge side of P-100

___________________________________ (Signature and Date) 216.3 PARAMETERS/OPERATING LIMITS


A. What is the normal operating value? B. What is the maximum self-priming lift? C. What is the physical location of the indicator? D. What is the rate of delivery (capacity)?

Questions 216.3.1 Peri-jet eductor [ref. a, ch. 5] D .2 S-type eductor [ref. a, ch. 5] D .3 Electrical submersible pump [ref. a, ch. 5] B D .4 P-100 pump [ref. b, sec. 4] A B C D .5 Derbyshire eductor [ref. d] ___________________________________ (Signature and Date) 216.4 SYSTEM INTERFACE 216.4.1 How does the loss of low firemain pressure affect the operation of the eductors?

[ref. a, ch. 6] ___________________________________ (Signature and Date)

104

216 DEWATERING EQUIPMENT/PUMPS SYSTEM (CONT’D) 216.5 SAFETY PRECAUTIONS 216.5.1 What safety precautions must be observed when operating the P-100?

[ref. b, sec. 4] .2 What special safety precautions apply to the operation of the submersible pump?

[ref. a, ch. 5] ___________________________________ (Signature and Date)

105

217 217 CRASH AND SALVAGE EQUIPMENT SYSTEM References: [a] NAVAIR 00-80R-14, NATOPS U.S. Navy Aircraft Firefighting and Rescue Manual 217.1 SYSTEM COMPONENTS AND COMPONENT PARTS



C. What are the components? Questions

217.1.1 Crash and salvage equipment: a. Crash and rescue tool kit [chs. 8, 9] A B C .2 Special tools/equipment: a. Firefighting clothing [ch. 3] A B b. CO2 extinguisher with extension hose assembly [ch. 8] A B ___________________________________ (Signature and Date) 217.2 PRINCIPLES OF OPERATION 217.2.1 How do the components work together to achieve the system’s function? [ch. 9] ___________________________________ (Signature and Date) 217.3 PARAMETERS/OPERATING LIMITS – None to be discussed. 217.4 SYSTEM INTERFACE – None to be discussed. 217.5 SAFETY PRECAUTIONS 217.5.1 When evacuating the aircrew and passengers during rescue evolutions, what safety

precaution is required if the rescue person's firefighting clothing becomes wet during entry? [ch. 9]

___________________________________ (Signature and Date)

106

218 218 CONFLAGRATION STATION SYSTEM References: [a] NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting [b] Ship's Information Book (SIB) [c] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [d] NAVAIR 00-80R-14, NATOPS U.S. Navy Aircraft Firefighting and Rescue Manual 218.1 SYSTEM COMPONENTS AND COMPONENT PARTS


A. What is its function? B. Where is it located? C. What are the sources of power? D. What are the safety/protective devices for this component/component part? E. What are the probable indications if this component fails?

Questions

218.1.1 Sprinkler group system control switch [ref. a, sec. 3; ref. b; ref. d, chs. 7, 8] A B D

.2 Divisional/deck edge doors control switch [ref. b] A B C .3 Hangar deck lighting control switch [ref. b] A B C .4 Ordnance elevators sprinkler control switch [ref. a, sec. 2; ref. b] A B C .5 Vehicle (upper/lower storage) ramp sprinkler control [ref. b; ref. d, ch. 8] A B C .6 Sound-powered circuit: a. X50J [ref. a, sec. 2; ref. b; ref. d, ch. 8] A B b. JZ [ref. a, sec. 2; ref. b] A B .7 High temperature alarms [ref. b; ref. c, ch. 37] A B E .8 Hangar deck 3MC units [ref. b; ref. d, ch. 8] A B C ___________________________________ (Signature and Date) 218.2 PRINCIPLES OF OPERATION 218.2.1 Draw a block diagram showing the locations of sprinkler groups. [ref. b] .2 During what conditions are the conflagration stations manned? [ref. d, ch. 8] ___________________________________ (Signature and Date)

107

218 CONFLAGRATION STATION SYSTEM (CONT’D) 218.3 PARAMETERS/OPERATING LIMITS

For the items listed, answer the following question: [ref. a, sec. 2; ref. b]

A. What are the allowable operating limits? B. What is the physical location of the indicators?

Questions

218.3.1 Firemain pressure A B ___________________________________ (Signature and Date) 218.4 SYSTEM INTERFACE 218.4.1 How do the following outside influences affect the operation of this system: [ref. b] a. Loss of firemain pressure b. Loss of AFFF c. Loss of electrical power d. Loss of communications ___________________________________ (Signature and Date) 218.5 SAFETY PRECAUTIONS 218.5.1 What special safety precautions apply to the operation of deck edge/divisional

doors? [ref. b] ___________________________________ (Signature and Date)

108

219 219 PIPE REPAIR/PATCHING SYSTEM References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [b] SS-100-AG-MAN-010, Damage Control and Firefighting Equipment Layout Booklet [c] Emergency Water Activated Repair Patch (EWARP) Operating Procedures [d] NAVSEA S5090-CL-MMC-010, Pipe Jumper Hose System (PJHS) Kit No. 1 and No. 2 219.1 SYSTEM COMPONENTS AND COMPONENT PARTS



Questions

219.1.1 Pipe patching kit [ref. a, sec. 42] A B a. Hacksaw with spare 12-inch blades A b. Canvas-duck cloth A c. Wood chisel A d. Diver’s gloves A e. 1/8-to-2-inch pipe cutter A B f. 2½-to-4-inch pipe cutter A B g. Ball peen hammer A h. Hatchet A i. Tarred marline A j. Spun tarred oakum A k. Wooden tapered plugs of various sizes A l. Rubber sheet A m. Metal cutting saw A n. Tailor shears A o. Wooden tapered wedges of various sizes A .2 Banding kit [ref. a, sec. 42] A B a. Clamping tool strap A b. Steel strapping/band-it buckle A c. Container A d. Gloves A e. Strong back A f. Chain wrench A

109

219 PIPE REPAIR/PATCHING SYSTEM (CONT’D)

Questions 219.1.3 Jubilee pipe patches [ref. a, sec. 42] A B .4 EWARP [ref. b, sec. 1] A ___________________________________ (Signature and Date) 220.2 PRINCIPLES OF OPERATION 219.2.1 How do the components work together to achieve the system’s function?

[ref. a, sec. 42] ___________________________________ (Signature and Date) 220.3 PARAMETERS/OPERATING LIMITS 219.3.1 What are the allowable piping system limits when using the following: a. Jubilee pipe patch [ref. a, sec. 42] b. EWARP [ref. c] c. Soft patch [ref. a, sec. 42] d. Banding patch [ref. a, sec. 42] ___________________________________ (Signature and Date) 219.4 SYSTEM INTERFACE 219.4.1 What piping systems would the EWARP not be used on? [ref. d] ___________________________________ (Signature and Date) 219.5 SAFETY PRECAUTIONS 219.5.1 What special safety precautions apply to using the: a. EWARP [ref. c] b. Banding kit [ref. a, sec. 42] ___________________________________ (Signature and Date)

110

220 220 PLUGGING KIT EQUIPMENT SYSTEM References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [b] NAVSEA S5090-B1-TAB-010, Training Aid Booklet for Damage Control Equipment [c] Ship's Information Book (SIB) 220.1 SYSTEM COMPONENTS AND COMPONENT PARTS



Questions

220.1.1 Plugging kit [ref. b, sec. 1; ref. c] A B a. Bag, kit/tool box portable A B b. Caulking iron A B c. Cold chisel A B d. Ball peen hammer A B e. C-type hatchet A B e. Lathing hatchet A B f. 5-pound maul A B g. Spun tarred oakum A B h. Tapered wood plugs A B i. Hand saw A B j. Shears A B k. Wood wedges A B .2 Box patch [ref. a, sec. 42] A B .3 Bucket patch [ref. a, sec. 42] A B .4 Square plate patch [ref. a, sec. 42] A B .5 Hinged plate patch [ref. a, sec. 42] A B .6 Hook bolts (T, J, and L type) [ref. a, sec. 42] A B ___________________________________ (Signature and Date) 220.2 PRINCIPLES OF OPERATION – None to be discussed. 220.3 PARAMETERS/OPERATING LIMITS – None to be discussed.

111

220 PLUGGING KIT EQUIPMENT SYSTEM (CONT’D) 220.4 SYSTEM INTERFACE 220.4.1 Discuss how the plugging kit interfaces with the shoring system. [ref. a, sec. 42] ___________________________________ (Signature and Date) 220.5 SAFETY PRECAUTIONS 220.5.1 What safety precautions must be observed when performing a plugging repair?


112

221 221 SHORING SYSTEM References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [b] Ships DC Book Part 1 221.1 SYSTEM COMPONENTS AND COMPONENT PARTS

Referring to a standard print of this system or the actual equipment, identify the following system components and component parts and discuss the designated items for each: [ref. a, sec. 43; ref b]

A. What is its function? B. Where is it located? C. What are the components of the kit?

Questions

221.1.1 Shoring tool kit A B C .2 Shoring material kit: a. Shoring lumber (wood) A B b. Shoring steel A B c. Wood wedges A B d. Steel wedges A B .3 Strongback A B .4 Shole A B .5 Shoring batten A B ___________________________________ (Signature and Date) 221.2 PRINCIPLES OF OPERATION – None to be discussed. 221.3 PARAMETERS/OPERATING LIMITS 221.3.1 What is the formula for determining the maximum length of a wood shore?

[ref. a, sec. 43] .2 What is the maximum length of a wood wedge? [ref. a, sec. 43] .3 What is the maximum weight metal shoring can support when: [ref. a, sec. 43] a. Collapsed b. Extended ___________________________________ (Signature and Date)

113

221 SHORING SYSTEM (CONT’D) 221.4 SYSTEM INTERFACE 221.4.1 How do the following outside influences affect the operation of this system:

[ref. a, sec. 43] a. Paint on wood shore/wedge b. Sea and ship's motion c. Explosive/flammable hazards in relation to using steel shore ___________________________________ (Signature and Date) 221.5 SAFETY PRECAUTIONS 221.5.1 What special safety precautions apply to bulged or panting bulkhead/

deck/overhead? [ref. a, sec. 43] .2 What safety precautions must be observed after shoring is completed?

[ref. a, sec. 43] .3 What safety precautions must be observed when transporting steel shoring? [ref. a,

sec. 43] ___________________________________ (Signature and Date)

114

222 222 COMPUTER BASED DAMAGE CONTROL (DC) MANAGEMENT SYSTEM References: [a] NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control, Practical Damage Control [b] NSTM S9086-CD-STM-010/CH-070R3, Nuclear Defense at Sea and Radiological

Recovery of Ships After Nuclear Weapons Explosion 222.1 SYSTEM COMPONENTS AND COMPONENT PARTS

Referring to a standard print of this system or the actual equipment, identify the following system components and component parts and discuss the designated items for each: A. What is its function? B. Where is it located? C. What are the sources of power?

Questions

222.1.1 Computer based DC Management system? [ref. a, sec. 39] A B C ___________________________________ (Signature and Date) 222.2 PRINCIPLES OF OPERATION – None to be discussed. 222.3 PARAMETERS/OPERATING LIMITS – None to be discussed. 222.4 SYSTEM INTERFACE 222.4.1 How do the EMP/TREE affect the operation of this system? [ref. b, sec. 1.3] .2 How does this system interface with the following: [ref. a, sec. 39] a. LAN databases b. Alarm sensors c. Communications d. Remote monitoring stations ___________________________________ (Signature and Date)

115

222 COMPUTER BASED DAMAGE CONTROL (DC) MANAGEMENT SYSTEM

(CONT’D) 222.5 SAFETY PRECAUTIONS 222.5.1 What safety precautions must be observed when operating this system?

[ref. b, sec. 1] ___________________________________ (Signature and Date)

116

223 223 SELF-CONTAINED BREATHING APPARATUS (SCBA) BREATHING AIR

CHARGING SYSTEM (BACS) References: [a] S6226-PD-MMO-010/07070R2, Self-Contained Breathing Apparatus (SCBA) Breathing

Air Charging System (BACS) [b] Emergency breathing air compressor (EBAC) Manufacturer Technical Manual [c] Electric High Pressure Air Compressor Manufacturer Technical Manual [d] NSTM S9086-QH-STM-010/CH-470R4, Shipboard BW/CW Defense and

Countermeasures/N-70CP-NTSP-S-30-0001A, 223.1 SYSTEM COMPONENTS AND COMPONENT PARTS



Questions

223.1.1 SCBA /BACS [ref. a, ch.3] A a. Air booster pump assembly [ref. a, chs. 2, 3, 5, 7] A B C 1. Drive air inlet pressure gauge A B C 2. Drive air regulator A B C 3. Regulated air pressure gauge A B C 4. Drive air bleed valve A B 5. Drive air control valve A B 6. Filtered air inlet pressure gauge A B C 7. Filtered air inlet valve A B 8. Filtered air outlet pressure gauge A B C 9. Drive air filter A B 10. Drive air LP relief valve A B C 11. Booster pump A B C 12. Surge tank A B 13. Filtered air HP relief valve A B C 14. Pilot switch A B C 15. In-line filter A B C

117

223 SELF-CONTAINED BREATHING APPARATUS (SCBA) BREATHING AIR

CHARGING SYSTEM (BACS) (CONT’D)

Questions 223.1.1 b. HP filter assembly [ref. a, chs. 2, 3, 5, 7] A B 1. Coalesor filter A B 2. Relief valve A B 3. Check valve A B 4. Cartridge holders A B 5. Manifold A B 6. H2O/CO indicator A B 7. HPFA gauge A B C 8. In-line filter A B c. HPAC CBR filter [ref d] A B d. 1. Shut-off valve A B 2. Bleed valve A B 3. Drain valve A B e. Connecting hose assemblies: [ref. a, chs. 2, 3, 5, 7] 1. Drive air hose assembly (H-101) A 2. Filtered air hose assembly (H-102) A 3. Filtered air supply hose assembly (H-103) A 4. Charging wands A .2 EBAC [ref. b, ch 1,2] a. LO AB b. Pressure gages AB c. Charging hose AB d. Relief valve assemblies AB e. Fuel system AB f. Compressor drive belt AB g. Compressor carrying assembly AB h. Air filters AB i. Moisture indicator AB .3 Electric HP breathing air compressor [ref. c, ch, 1] a. Electric compressor drive belt AB b. LO AB c. Relief valves AB d. Low LO shut down switch AB e. Final discharge air regulating pressure valve AB f. HP flasks AB g. Breathing air charging panel AB

118



Questions 223.1.3 h. Gages AB I Charging hoses AB j. Back pressure regulating valve AB k HP air cut out valves AB l Coalescer drain AB m Moisture/humidity indicator AB n Auto start/stop AB o Pressure regulator AB ___________________________________ (Signature and Date) 223.2 PRINCIPLES OF OPERATION 223.2.1 How do the components work together to achieve the system’s function?

[ref. a, ch. 3] .2 Trace the air paths for the following equipment: [ref. a, ch. 3] a. ABPA drive air path and filtered air path b. HPFA drive air path and filtered air path c. EBAC d. Electric HP breathing air compressor ___________________________________ (Signature and Date) 223.3 PARAMETERS/OPERATING LIMITS

For the items listed, answer the following questions: [ref. a, ch. 2]

A. What is the normal operating value? B. What are the allowable operating limits?

Questions

223.3.1 Filtered air outlet pressure gage A B .2 Filtered air inlet pressure gage A B .3 Drive air bleed valve A B .4 Regulated air pressure gage A B .5 Drive air inlet pressure gage A B .6 Filtered air inlet valve A B .7 Drive air control valve A B .8 Drive air regulator A B .9 HPFA gauge A B

119



Questions 223.3.10 Shut-off valve A B .11 Bleed valve A B .12 Drain valve A B .13 H2O/CO indicator A B .14 Relief valve A B .15 Shut-off knob (hose isolation valve) A B .16 Bleed handle (hose isolation valve) A B .17 Back pressure regulator A B .18 Pressure regulator A B ___________________________________ (Signature and Date) 223.4 SYSTEM INTERFACE 223.4.1 How do the following outside influences affect the operation of this system:

[ref. a, ch. 5] a. Low or loss of HP air b. Air quality testing c. Breathing air test kit d. Loss of electrical power ___________________________________ (Signature and Date) 223.4 SAFETY PRECAUTIONS 223.4.1 What safety precautions must be observed when operating this system?

[ref. a, chs. 4, 6] ___________________________________ (Signature and Date)

121

300 INTRODUCTION TO WATCHSTATIONS

300.1 INTRODUCTION

The Watchstation section of your PQS is where you get a chance to demonstrate to your Qualifier that you can put the knowledge you have gained in the previous sections to use. It allows you to practice the tasks required for your watchstation and to handle abnormal conditions and emergencies. Before starting your assigned tasks, you must complete the prerequisites that pertain to the performance of that particular task. Satisfactory completion of all prerequisites is required prior to achievement of final watchstation qualification.

300.2 FORMAT

Each watchstation in this section contains:

D. A FINAL QUALIFICATION PAGE, which is used to obtain the required signatures for approval and recording of Final Qualification.

E. PREREQUISITES, which are items that must be certified completed before

you can begin qualification for a particular watchstation. Prerequisites may include schools, watchstation qualifications from other PQS books, and fundamentals, systems, or watchstation qualifications from this book. Prior to signing off each prerequisite line item, the Qualifier must verify completion from existing records. Record the date of actual completion, not the sign-off date.

F. WATCHSTATION Performance, which is the practical factors portion of your

qualification. The performance is broken down as follows:

Tasks (routine operating tasks that are performed frequently) Infrequent Tasks Abnormal Conditions Emergencies Training Watches

If there are multiple watchstations, a QUALIFICATION PROGRESS SUMMARY will appear at the end of the Standard.

122

300 INTRODUCTION TO WATCHSTATIONS (CONT’D)

300.3 OPERATING PROCEDURES

The PQS deliberately makes no attempt to specify the procedures to be used to complete a task or control or correct a casualty. The only proper sources of this information are the technical manuals, Engineering Operational Sequencing System (EOSS), Naval Air Training and Operating Procedures Standardization (NATOPS) or other policy-making documents prepared for a specific installation or a piece of equipment. Additionally, the level of accuracy required of a trainee may vary from school to school, ship to ship, and squadron to squadron based upon such factors as mission requirements. Thus, proficiency may be confirmed only through demonstrated performance at a level of competency sufficient to satisfy the Commanding Officer.

300.4 DISCUSSION ITEMS

Though actual performance of evolutions is always preferable to observation or discussion, some items listed in each watchstation may be too hazardous or time consuming to perform or simulate. Therefore, you may be required to discuss such items with your Qualifier.

300.5 NUMBERING

Each Final Qualification is assigned both a watchstation number and a NAVEDTRA Final Qualification number. The NAVEDTRA number is to be used for recording qualifications in service and training records.


After completing the required prerequisites applicable to a particular task, you may perform the task under the supervision of a qualified watchstander. If you satisfactorily perform the task and can explain each step, your Qualifier will sign you off for that task. After all line items have been completed, your Qualifier will verify Final Qualification by signing and dating the Final Qualification pages.

123

FINAL QUALIFICATION NAVEDTRA 43119-K

301 BASIC DAMAGE CONTROL (DC) COMMUNICATIONS NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as qualified in BASIC DAMAGE CONTROL (DC) COMMUNICATIONS (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

125

WATCHSTATION 301 301 BASIC DAMAGE CONTROL (DC) COMMUNICATIONS

Estimated completion time: 2 weeks 301.1 PREREQUISITES

FOR OPTIMUM TRAINING EFFECTIVENESS, THE FOLLOWING ITEMS SHOULD BE

COMPLETED PRIOR TO STARTING YOUR ASSIGNED TASKS BUT SHALL BE COMPLETED

PRIOR TO FINAL WATCHSTATION QUALIFICATION. 301.1.1 FUNDAMENTALS FROM THIS PQS: 101 Damage Control (DC) Safety Precautions Completed ___________________________________ 3% of Watchstation (Qualifier and Date) 102 Damage Control (DC) Communications/Symbology Completed ___________________________________ 3% of Watchstation (Qualifier and Date) 107 Damage Control (DC) Organization Completed ___________________________________ 3% of Watchstation (Qualifier and Date) 112 Computer Based Damage Control (DC) Management System and Software Completed ___________________________________ 3% of Watchstation (Qualifier and Date) .2 SYSTEMS FROM THIS PQS: 201 Damage Control (DC) Communications Completed ___________________________________ 3% of Watchstation (Qualifier and Date)

126

301 BASIC DAMAGE CONTROL (DC) COMMUNICATIONS (CONT’D) 301.2 TASKS

For the tasks listed below:

A. What are the steps of this procedure? B. What are the reasons for each step? C. What means of communications are used? D. Satisfactorily perform this task.

Questions 301.2.1 Obtain and inspect DC communications equipment IAW EDROM

(2 times) A D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .2 Establish and test communications IAW NSTM 079, Vol. 2 (2 times) A B D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .3 Transmit messages using standard phraseology IAW NSTM 079,

Vol. 2 (2 times) A B D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .4 Receive and record messages using standard DC symbology

IAW NSTM 079, Vol. 2 (2 times) A B D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

127

301 BASIC DAMAGE CONTROL (DC) COMMUNICATIONS (CONT’D)

Questions 301.2.5 Secure and stow DC communications equipment IAW EDORM

(2 times) A B D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .6 Deliver an oral and a written message IAW NSTM 079, Vol. 2 (2 times) A B C D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .7 Plot a fire scenario using standard DC symbology IAW NSTM 079,

Vol. 2 (2 times) A C D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .8 Identify equipment in emergency communications kit IAW AEL (2 times) B D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .9 Plot a flooding scenario using standard DC symbology IAW NSTM 079,

Vol. 2 (2 times) A C D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

128

301 BASIC DAMAGE CONTROL (DC) COMMUNICATIONS (CONT’D)

Questions 301.2.10 Plot a CBR-D scenario using standard DC symbology IAW NSTM 079,

Vol. 2 (2 times) A C D ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

COMPLETED .2 AREA COMPRISES 42% OF WATCHSTATION.

301.3 INFREQUENT TASKS For the infrequent tasks listed below:

A. What are the steps of this procedure? B. What are the reasons for each step? C. What means of communications are used? D. What conditions require this infrequent task? E. Satisfactorily perform or simulate this infrequent task.

Questions 301.3.1 Transmit messages through a sound-powered telephone

earpiece IAW NSTM 079, Vol. 2 A B D E ___________________________________ (Signature and Date) .2 Receive messages through a sound-powered telephone

mouthpiece IAW NSTM 079, Vol. 2 A B D E ___________________________________ (Signature and Date) .3 Reestablish communications upon evacuation of the

DC repair station IAW NSTM 079, Vol. 2 A B C D E ___________________________________ (Signature and Date) .4 Reestablish communications using the emergency

communication kit IAW NSTM 079, Vol. 2 A B C D E ___________________________________ (Signature and Date)


129

301 BASIC DAMAGE CONTROL (DC) COMMUNICATIONS (CONT’D) 301.4 ABNORMAL CONDITIONS

For the abnormal conditions listed below:

A. What indications and alarms are received? B. What immediate action is required? C. What are the probable causes? D. What emergencies or malfunctions may occur if immediate action is not

taken? E. How does this condition affect other operations/equipment/watchstations? F. Satisfactorily perform or simulate the corrective/immediate action for this

abnormal condition.

Questions 301.4.1 Loss/malfunctioning of communication IAW NSTM 079, Vol. 2 A B C D E F ___________________________________ (Signature and Date)

COMPLETED .4 AREA COMPRISES 9% OF WATCHSTATION. 301.5 EMERGENCIES – None to be discussed.

301.6 WATCHES 301.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Phone Talker (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) Plotter (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

COMPLETED .6 AREA COMPRISES 10% OF WATCHSTATION. 301.7 EXAMINATIONS - None.

131


302 BASIC FIRST-AID NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as qualified BASIC FIRST-AID (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

133

WATCHSTATION 302 302 BASIC FIRST-AID




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 302.1.1 OTHER QUALIFICATIONS: American Heart Association Basic Life Support Certification (RECOMMENDED) Completed ___________________________________ (Qualifier and Date) .2 WATCHSTATIONS FROM THIS PQS: 301 Basic Damage Control (DC) Communications Completed ___________________________________ (Qualifier and Date) .3 FUNDAMENTALS FROM THIS PQS: 105 First-Aid and Rescue Completed ___________________________________ 5% of Watchstation (Qualifier and Date) 302.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What means of communications are used? D. What safety precautions must be observed? E. What parameters/operating limits must be monitored? F. Satisfactorily perform this task.

Questions

302.2.1 Demonstrate patient evaluation procedures IAW BMR A B C D E F ___________________________________ (Signature and Date)

134

302 BASIC FIRST-AID (CONT’D)

Questions 302.2.2 Locate designated first-aid boxes IAW Medical Department’s List F ___________________________________ (Signature and Date) .3 Locate battle dressing stations IAW Watchstation Quarter Bill F ___________________________________ (Signature and Date)

COMPLETED .2 AREA COMPRISES 25% OF WATCHSTATION. 302.3 INFREQUENT TASKS For the infrequent tasks listed below:

A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What safety precautions must be observed? F. What conditions require this infrequent task? G. Satisfactorily perform or simulate this infrequent task.

Questions

302.3.1 Place a personnel casualty in a designated stretcher IAW BMR (3 times) A B C D E F G

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .2 Rescue victim from an energized circuit IAW BMR A B C D E F G ___________________________________ (Signature and Date) .3 Control hemorrhage by direct pressure IAW BMR A B C D E F G ___________________________________ (Signature and Date)

135


Questions 302.3.4 Control hemorrhage by tourniquet IAW BMR A B C D E F G ___________________________________ (Signature and Date) .5 Control hemorrhage by using pressure points IAW BMR A B C D E F G ___________________________________ (Signature and Date) .6 Treat for shock IAW BMR A B D E F G ___________________________________ (Signature and Date) .7 Apply a splint to a simple fracture IAW BMR A B C D E F G ___________________________________ (Signature and Date) .8 Apply a splint to a compound fracture IAW BMR A B C D E F G ___________________________________ (Signature and Date) .9 Treat a heat exhaustion casualty IAW BMR A B C D E F G ___________________________________ (Signature and Date) .10 Treat a heat stroke casualty IAW BMR A B C D E F G ___________________________________ (Signature and Date) .11 Treat a heat cramps casualty IAW BMR A B C D E F G ___________________________________ (Signature and Date) .12 Treat a first degree burn IAW BMR A B C D E F G ___________________________________ (Signature and Date)

136


Questions 302.3.13 Treat a second degree burn IAW BMR A B C D E F G ___________________________________ (Signature and Date) .14 Treat a third degree burn IAW BMR A B C D E F G ___________________________________ (Signature and Date)

COMPLETED .3 AREA COMPRISES 80% OF WATCHSTATION. 302.4 ABNORMAL CONDITIONS– None to be discussed. 302.5 EMERGENCIES – None to be discussed. 302.6 WATCHES – None. 302.7 EXAMINATIONS – None.

137


303 BASIC FIREFIGHTING NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as qualified BASIC FIREFIGHTING (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

139

WATCHSTATION 303 303 BASIC FIREFIGHTING




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 303.1.1 SCHOOLS: Self Contained Breathing Apparatus (SCBA) (NSWC SCBA 4.5O-1.0) NKO

(REQUIRED) Completed ___________________________________ (Qualifier and Date) .2 WATCHSTATIONS FROM THIS PQS: 302 Basic First-Aid Completed ___________________________________ (Qualifier and Date) .3 FUNDAMENTALS FROM THIS PQS: 103 Firefighting Completed ___________________________________ 1% of Watchstation (Qualifier and Date) .4 SYSTEMS FROM THIS PQS: 203 Self-Contained Breathing Apparatus (SCBA) Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 204 Personal Protective Clothing Equipment Completed ___________________________________ 1% of Watchstation (Qualifier and Date)

140

303 BASIC FIREFIGHTING (CONT’D) 303.1.4 206 Portable Firefighting Equipment Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 207 Portable Damage Control (DC) Equipment Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 208 Installed Fire Extinguishing Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 209 Aqueous Film Forming Foam (AFFF) Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 210 Firemain Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 211 Access/Overhaul Equipment Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 212 Ventilation Completed ___________________________________ 1% of Watchstation (Qualifier and Date)

141

303 BASIC FIREFIGHTING (CONT’D) 303.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What safety precautions must be observed? F. What parameters/operating limits must be monitored? G. Locate, identify, and discuss general operation. H. Satisfactorily perform this task.

Questions

303.2.1 Don and doff FFE/FPG IAW NSTM 077 A B E F G H ___________________________________ (Signature and Date) .2 Relieve nozzle position on charged hose IAW NSTM 555 A B C D E F H ___________________________________ (Signature and Date) .3 Inspect, don, and activate SCBA IAW NSTM 077 A B C D E F G H ___________________________________ (Signature and Date) .4 Charge, clean, inspect, and restow the SCBA IAW NSTM 077 A B C D E F H ___________________________________ (Signature and Date) .5 Inspect, layout, charge, and restow fire hose IAW NSTM 555 A B C E G H ___________________________________ (Signature and Date) .6 Charge hose and operate firefighting nozzles through

all patterns IAW NSTM 555 A B C D E G H ___________________________________ (Signature and Date)

142

303 BASIC FIREFIGHTING (CONT’D)

Questions 303.2.7 Demonstrate proper water management techniques IAW

NSTM 555 A B C E F G H ___________________________________ (Signature and Date) .8 Maneuver charged hoses up and down ladders IAW NSTM 555 A C D E G H ___________________________________ (Signature and Date) .9 Demonstrate the ability to activate the following installed equipment

IAW NSTM 555: a. CO2 hose reel A B E F G H ___________________________________ (Signature and Date) b. CO2 flooding system A B E F G H ___________________________________ (Signature and Date) c. AFFF sprinkling system A B C D E F G H ___________________________________ (Signature and Date) d. Saltwater sprinkling system A B D E F G H ___________________________________ (Signature and Date) e. HALON/HFP system A B C D E F G H ___________________________________ (Signature and Date) f. APC extinguishing system (range guard) A B E F G H ___________________________________ (Signature and Date)

143


Questions 303.2.9 g. Freshwater hose reel A B C D E F G H ___________________________________ (Signature and Date) h. AFFF hose reel A B C D E F G H ___________________________________ (Signature and Date) i. Water Mist system remotely/locally A B C D E F G H ___________________________________ (Signature and Date) .10 Locate the following items and demonstrate the ability to use them

IAW NSTM 555: a. AFFF in-line eductor A B C F G H ___________________________________ (Signature and Date) b. Smoke curtains A B C G H ___________________________________ (Signature and Date) c. Smoke blankets A B C G H ___________________________________ (Signature and Date) d. Thermal imager A B C F G H ___________________________________ (Signature and Date) e. PECU A B C E F G H ___________________________________ (Signature and Date) f. Ramfan A B E F G H ___________________________________ (Signature and Date)

144


Questions 303.2.10 g. Box fan A B E F G H ___________________________________ (Signature and Date) h. Portable firefighting pump (P-100) and related equipment A B C E F G H ___________________________________ (Signature and Date) j. PHARS A B C E F G H ___________________________________ (Signature and Date) k. Power hawk A B C E F G H ___________________________________ (Signature and Date) l. Portable CO2 extinguisher A B E F G H ___________________________________ (Signature and Date) m. Portable AFFF extinguisher A B E F G H ___________________________________ (Signature and Date) n. Portable PKP extinguishers A B E F G H ___________________________________ (Signature and Date) o. Overhaul equipment A B C E G H ___________________________________ (Signature and Date)

145


Questions 303.2.11 Demonstrate the ability to locate, identify, set and maintain the

following IAW NSTM 555: a. Fire boundaries A B C E G H ___________________________________ (Signature and Date) b. Smoke boundaries A B C E H ___________________________________ (Signature and Date) d. Flooding boundaries A B C E G H ___________________________________ (Signature and Date) e. Toxic boundaries A B C E G H ___________________________________ (Signature and Date)



Questions

303.3.1 Ventilate compartments IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .2 Maneuver charged hoses through a vertical trunk IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date)

146


Questions 303.3.3 Perform indirect firefighting procedures IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .4 Perform fog firefighting procedures IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .5 Rig portable desmoking equipment inside fire/smoke boundaries to

achieve active desmoking IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date)

COMPLETED .3 AREA COMPRISES 10% OF WATCHSTATION. 303.4 ABNORMAL CONDITIONS


A. What indications and alarms are received? B. What immediate action is required? C. What are the probable causes? D. What operating limitations are imposed? E. What emergencies or malfunctions may occur if immediate action is not

taken? F. How does this condition affect other operations/equipment/watchstations? G. What follow-up action is required? H. Satisfactorily perform or simulate the corrective/immediate action for this

abnormal condition.

Questions 303.4.1 Loss of breathing air IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .2 SCBA quick charge IAW NSTM 555 A B D E G H ___________________________________ (Signature and Date)

147


Questions 303.4.3 Loss of ship’s electrical power IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .4 Improperly stowed hazardous/combustible materials

IAW NSTM 079, Vol. 2 B C E F G H ___________________________________ (Signature and Date) .5 Loss of HP air IAW EOSS A B C D E F G H ___________________________________ (Signature and Date) .6 Ruptured hose IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .7 Clogged vari-nozzle IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .8 Compartment obstructed by debris IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date)


148

303 BASIC FIREFIGHTING (CONT’D) 303.5 EMERGENCIES

For the emergencies listed below:

A. What indications and alarms are received? B. What immediate action is required? C. What are the probable causes? D. What operating limitations are imposed? E. What other emergencies or malfunctions may occur if immediate action is not

taken? F. How does this emergency affect other operations/equipment/watchstations? G. What follow-up action is required? H. Satisfactorily perform or simulate the immediate action for this emergency.

Questions

303.5.1 Fire in Ventilation system IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .2 Fire reflash IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .3 Wild hose IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .4 Loss of firemain pressure IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .5 Loss of fire boundaries IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .6 Class A fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .7 Class B fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date)

149


Questions 303.5.8 Class C fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .9 Class D fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .10 Fire in CBR environment IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 15% OF WATCHSTATION. 303.6 WATCHES 303.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Plugman (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) Boundaryman (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

150

303 BASIC FIREFIGHTING (CONT’D) 303.6.1 Accessman/Overhaulman (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

COMPLETED .6 AREA COMPRISES 20% OF WATCHSTATION. 303.7 EXAMINATIONS – None.

151


304 FIRE WATCH STANDER NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified FIRE WATCH STANDER (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

153

WATCHSTATION 304 304 FIRE WATCH STANDER




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 304.1.1 WATCHSTATIONS FROM THIS PQS: 303 Basic Firefighting Completed ___________________________________ (Qualifier and Date) .2 FUNDAMENTALS FROM THIS PQS: 108 Fire Watch Completed ___________________________________ 7% of Watchstation (Qualifier and Date) 304.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What safety precautions must be observed? F. Satisfactorily perform this task.

Questions

304.2.1 Obtain and inspect equipment/PPE IAW NSTM 555 A B C E F ___________________________________ (Signature and Date) .2 Setup communications between hot-work operator

and fire watch when on opposite sides of bulkhead/deck IAW NSTM 074, Vol. 1 A B C D E F


154

304 FIRE WATCH STANDER (CONT’D)

Questions 304.2.3 Maintain surveillance over hot-work area IAW NSTM 074, Vol. 1 A B C D E F ___________________________________ (Signature and Date) .4 Inspect area after hot-work is completed IAW NSTM 074, Vol. 1 A B E F ___________________________________ (Signature and Date) .5 Inspect and return fire watch equipment IAW NSTM 555 A B F ___________________________________ (Signature and Date)

COMPLETED .2 AREA COMPRISES 35% OF WATCHSTATION. 304.3 INFREQUENT TASKS – None to be discussed. 304.4 ABNORMAL CONDITIONS


A. What indications and alarms are received? B. What immediate action is required? C. What are the probable causes? D. What operating limitations are imposed? E. How does this condition affect other operations/equipment/watchstations? F. What follow-up action is required? G. Satisfactorily perform or simulate the corrective/immediate action for this

abnormal condition.

Questions 304.4.1 Loss of firemain IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .2 Excessive smoke/fumes from hot-work IAW NSTM 074, Vol. 1 A B C D E F G ___________________________________ (Signature and Date) .3 Fuel spill IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date)


155

304 FIRE WATCH STANDER (CONT’D) 304.5 EMERGENCIES




Questions

304.5.1 Fire IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .2 Loss of communications with hot-work operator IAW

NSTM 074, Vol. 1 A B C D E F G H ___________________________________ (Signature and Date) .3 Fire extinguishing equipment malfunctions IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 22% OF WATCHSTATION. 304.6 WATCHES 304.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Fire Watch Stander (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)


304.7 EXAMINATIONS – None.

157


305 BASIC CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL

(CBR) DEFENSE NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as qualified BASIC CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

159

WATCHSTATION 305 305 BASIC CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 305.1.1 WATCHSTATIONS FROM THIS PQS: 301 Basic Damage Control (DC) Communications Completed ___________________________________ (Qualifier and Date) .2 FUNDAMENTALS FROM THIS PQS: 106 Chemical, Biological, and Radiological (CBR) Defense Completed ___________________________________ 5% of Watchstation (Qualifier and Date) .3 SYSTEMS FROM THIS PQS: 203 Self-Contained Breathing Apparatus (SCBA) Completed ___________________________________ 5% of Watchstation (Qualifier and Date) 204 Personal Protective Clothing Equipment Completed ___________________________________ 3% of Watchstation (Qualifier and Date) 205 Watertight Closures/Hull Fittings Completed ___________________________________ 2% of Watchstation (Qualifier and Date) 212 Ventilation Completed ___________________________________ 5% of Watchstation (Qualifier and Date)

160

305 BASIC CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE

(CONT’D) 305.1.3 214 Chemical, Biological, and Radiological (CBR) Detection and Decontamination

Equipment Completed ___________________________________ 5% of Watchstation (Qualifier and Date) 305.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What safety precautions must be observed? E. What parameters/operating limits must be monitored? F. Satisfactorily perform this task.

Questions

305.2.1 Locate DECON/CCA stations IAW NSTM 470 F ___________________________________ (Signature and Date) .2 Transit through a CCA and DECON station IAW NSTM 470 A B C D E F ___________________________________ (Signature and Date) .3 Locate casualty collection stations IAW NSTM 470 F ___________________________________ (Signature and Date) .4 Locate deep shelter stations IAW NSTM 470 F ___________________________________ (Signature and Date) .5 Don and doff chemical protective ensemble IAW NSTM 470 A B D F ___________________________________ (Signature and Date)

161


(CONT’D)

Questions 305.2.6 Change protective mask canister IAW NSTM 470 A B D F ___________________________________ (Signature and Date) .7 Use the M-291/RSDL skin DECON kit IAW NSTM 470 A B D F ___________________________________ (Signature and Date) .8 Demonstrate self and buddy aid for nerve agent exposure

using atropine and 2-PAM/chloride/CANA training injectors IAW NSTM 470 A B D F

___________________________________ (Signature and Date) .9 Pass through CPS/SACPS air lock/pressure lock IAW NSTM 470 A B C D E F ___________________________________ (Signature and Date) .10 Decontaminate external and internal areas IAW NSTM 470 A B C D E F ___________________________________ (Signature and Date) .11 Transit through a CTA/CPS casualty DECON station IAW NSTM 470 A B C D E F ___________________________________ (Signature and Date) .12 Transit through a CPS DECON station IAW NSTM 470 A B C DE F ___________________________________ (Signature and Date) .13 Set up a three compartment conventional DECON station

IAW NSTM 470 A B C D E F ___________________________________ (Signature and Date)

162


(CONT’D)

Questions 305.2.14 Set up a sanitary space DECON station IAW NSTM 470 A B C D E F ___________________________________ (Signature and Date)

COMPLETED .2 AREA COMPRISES 45% OF WATCHSTATION. 305.3 INFREQUENT TASKS – None. 305.4 ABNORMAL CONDITIONS– None to be discussed. 305.5 EMERGENCIES


A. What indications and alarms are received? B. What immediate action is required? C. What operating limitations are imposed? D. What other emergencies or malfunctions may occur if immediate action is not

taken? E. How does this emergency affect other operations/equipment/watchstations? F. What follow-up action is required? G. Satisfactorily perform or simulate the immediate action for this emergency.

Questions

305.5.1 Nuclear blast IAW NSTM 470 A B C D E F G ___________________________________ (Signature and Date) .2 Chemical attack IAW NSTM 470 A B C D E F G ___________________________________ (Signature and Date) .3 Biological attack IAW NSTM 470 A B C D E F G ___________________________________ (Signature and Date) .4 Nuclear radiation exposure IAW NSTM 470 A B C D E F G ___________________________________ (Signature and Date)

163


(CONT’D)

Questions 305.5.5 Chemical agent exposure IAW NSTM 470: a. Nerve A B C D E F G b. Blister A B C D E F G c. Blood A B C D E F G ___________________________________ (Signature and Date) .6 Biological agent exposure IAW NSTM 470: a. Toxins A B C D E F G b. Pathogens A B C D E F G ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 30% OF WATCHSTATION. 305.6 WATCHES – None. 305.7 EXAMINATIONS – None.

165

QUALIFICATION NAVEDTRA 43119-K

306 BASIC DAMAGE CONTROL (DC) NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as qualified BASIC DAMAGE CONTROL (DC) (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

167

WATCHSTATION 306 306 BASIC DAMAGE CONTROL (DC)




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 306.1.1 WATCHSTATIONS FROM THIS PQS:

303 Basic Firefighting Completed ___________________________________ (Qualifier and Date) 304 Fire Watch Stander Completed ___________________________________ (Qualifier and Date) 305 Basic Chemical, Biological, and Radiological (CBR) Defense Completed ___________________________________ (Qualifier and Date) .2 FUNDAMENTALS FROM THIS PQS: 104 Basic Damage Control (DC) Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 107 Damage Control (DC) Organization Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 110 Battle Damage Repair Completed ___________________________________ 1% of Watchstation (Qualifier and Date)

111 Hazardous Material Control and Management (HMC&M) Program Completed ___________________________________ 1% of Watchstation (Qualifier and Date)

168

306 BASIC DAMAGE CONTROL (DC) (CONT’D) 306.1.2 113 Investigation Completed ___________________________________ 1% of Watchstation (Qualifier and Date) .3 SYSTEMS FROM THIS PQS: 202 Emergency Escape Breathing Device (EEBD) Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 213 Installed Drainage Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 215 Casualty Power Distribution Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 216 Dewatering Equipment/Pumps Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 223 Self-Contained Breathing Apparatus (SCBA) Breathing Air Charging System

(BACS) Completed ___________________________________ 1% of Watchstation (Qualifier and Date) 306.2 TASKS



Questions

306.2.1 Dog and undog individually dogged watertight doors IAW NSTM 079, Vol. 2 A B E F


169

306 BASIC DAMAGE CONTROL (DC) (CONT’D)

Questions 306.2.2 Dog and undog quick-acting watertight doors IAW NSTM 079, Vol. 2 A B E F ___________________________________ (Signature and Date) .3 Dog and undog a watertight hatch IAW NSTM 079, Vol. 2 A B E F ___________________________________ (Signature and Date) .4 Dog and undog a raised scuttle/flush deck scuttle IAW

NSTM 079, Vol. 2 A B E F ___________________________________ (Signature and Date) .5 Dog and undog a ballistic hatch IAW NSTM 079, Vol. 2 A B C E F ___________________________________ (Signature and Date) .6 Dog and undog a ballistic scuttle IAW NSTM 079, Vol. 2 A B C E F ___________________________________ (Signature and Date) .7 Open and close deck drains IAW NSTM 079, Vol. 2 A B F ___________________________________ (Signature and Date) .8 Open and close battle ports IAW NSTM 079, Vol. 2 A B E F ___________________________________ (Signature and Date) .9 Open and close a sounding tube IAW NSTM 079, Vol. 2 A B C E F ___________________________________ (Signature and Date) .10 Open and close ventilation closures IAW NSTM 079, Vol. 2 A B C E F ___________________________________ (Signature and Date) .11 Open and close air test fittings IAW NSTM 079, Vol. 2 A B C E F ___________________________________ (Signature and Date)

170


Questions 306.2.12 Open and close overboard discharge fittings IAW NSTM 079, Vol. 2 A B C E F ___________________________________ (Signature and Date) .13 Set and maintain material condition YOKE IAW NSTM 079, Vol. 2 A B C F ___________________________________ (Signature and Date) .14 Set and maintain material condition ZEBRA IAW NSTM 079, Vol. 2 A B C F ___________________________________ (Signature and Date) .15 Log DC fittings open/closed in the closure log IAW NSTM 079, Vol. 2

(2 times) A B F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .16 Set modified condition ZEBRA IAW NSTM 079, Vol. 2 A B C E F ___________________________________ (Signature and Date) .17 Demonstrate proper procedures for reporting emergencies IAW

NSTM 555` A B D F ___________________________________ (Signature and Date) .18 Demonstrate proper procedures for bracing for shock

IAW NSTM 079, Vol. 2 (2 times) A B E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .19 Demonstrate proper battle dress IAW NSTM 079, Vol. 2 A B F ___________________________________ (Signature and Date)

171


Questions 306.2.20 Transit to assigned battle station using proper traffic routes IAW SOP A B C E F ___________________________________ (Signature and Date) .21 Locate piping system/isolation valves in assigned areas IAW EOSS A B E F ___________________________________ (Signature and Date) .22 Locate and operate system valves equipped with remote operators

IAW EOSS A B C E F ___________________________________ (Signature and Date) .23 Isolate ventilation systems in assigned area IAW EOSS A B C D E F ___________________________________ (Signature and Date) .24 Set and maintain flooding boundaries IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .25 Transit through CPS air lock and maintain zone pressurization

IAW NSTM 079, Vol. 2 A B C D F ___________________________________ (Signature and Date) .26 Identify and report material conditions of readiness

discrepancies IAW SOP A B C D E F ___________________________________ (Signature and Date)


172

306 BASIC DAMAGE CONTROL (DC) (CONT’D) 306.3 INFREQUENT TASKS For the infrequent tasks listed below:


Questions

306.3.1 Identify William fittings in assigned area IAW NSTM 079, Vol. 2 A B C D F G ___________________________________ (Signature and Date) .2 Set circle William fittings in assigned area IAW NSTM 079, Vol. 2 A B C D F G ___________________________________ (Signature and Date) .3 Rig jumper hoses around damaged firemain piping to

reestablish system IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .4 Align/secure an installed eductor IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date)


173

306 BASIC DAMAGE CONTROL (DC) (CONT’D) 306.4 ABNORMAL CONDITIONS




abnormal condition.

Questions 306.4.1 Violations of material conditions of readiness IAW NSTM 079,

Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .2 Improperly stowed materials and equipment IAW NSTM 079,

Vol. 2 A B C E F G H ___________________________________ (Signature and Date)

COMPLETED .4 AREA COMPRISES 10% OF WATCHSTATION. 306.5 EMERGENCIES




Questions

306.5.1 Presence of unusual odors or vapors IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date)

174


Questions 306.5.2 Ruptured pipes/flooding IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .3 Loss of flooding boundaries IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .4 Progressive flooding IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .5 Failed isolation valves IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .6 HAZMAT spill IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 10% OF WATCHSTATION. 306.6 WATCHES 306.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Closure Detail (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) Isolation Detail (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

175

306 BASIC DAMAGE CONTROL (DC) (CONT’D) 306.6.1 Flooding Boundaryman (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) Hoseman (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) Nozzleman (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)


306.7 EXAMINATIONS (COVERS WATCHSTATIONS 301 THROUGH 306) 306.7.1 EXAMINATIONS Pass a written examination


.2 EXAMINATIONS Pass an oral examination board


177


307 ADVANCED DAMAGE CONTROL (DC) NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as qualified ADVANCED DAMAGE CONTROL (DC) (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

179

WATCHSTATION 307 307 ADVANCED DAMAGE CONTROL (DC)

Estimated completion time: 8 weeks

NOTE: UPON COMPLETION OF THIS WATCHSTATION, PERSONNEL SHALL BE QUALIFIED TO

PERFORM IN THE FOLLOWING TEAMS: DEWATERING, HULL PATCHING/PLUGGING, PIPE PATCHING, SHORING, AND SOUNDING.

307.1 PREREQUISITES



PRIOR TO FINAL WATCHSTATION QUALIFICATION. 307.1.1 WATCHSTATIONS FROM THIS PQS: 301-306 Basic Damage Control (DC) Completed ___________________________________ (Qualifier and Date) .2 SYSTEMS FROM THIS PQS: 219 Pipe Repair/Patching Completed ___________________________________ 2% of Watchstation (Qualifier and Date) 220 Plugging Kit Equipment Completed ___________________________________ 2% of Watchstation (Qualifier and Date) 221 Shoring Completed ___________________________________ 2% of Watchstation (Qualifier and Date)

180

307 ADVANCED DAMAGE CONTROL (DC) (CONT’D) 307.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What safety precautions must be observed? F. What parameters/operating limits must be monitored? G. Satisfactorily perform this task.

Questions

307.2.1 Take, record, and report soundings on all tanks/voids within DC repair station areas/adjacent areas IAW NSTM 079, Vol. 2 A B C D E F G

___________________________________ (Signature and Date) .2 Inventory and inspect a plugging kit IAW AEL G ___________________________________ (Signature and Date) .3 Demonstrate plugging procedures to control a crack and

a hole above and below the waterline IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .4 Inventory and inspect a shoring tool kit IAW AEL G ___________________________________ (Signature and Date) .5 Locate shoring materials in assigned areas IAW AEL G ___________________________________ (Signature and Date) .6 Construct I-type shoring IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date)

181

307 ADVANCED DAMAGE CONTROL (DC) (CONT’D)

Questions 307.2.7 Construct H-type shoring IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .8 Construct wood K-type shoring utilizing a carpenter square

IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .9 Construct wood K-type shoring utilizing a shoring batten IAW

NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .10 Construct K-type shoring using steel shores IAW NSTM 079,

Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .11 Describe the duties of a shoring watch IAW AEL G ___________________________________ (Signature and Date) .12 Inventory and inspect a pipe patching kit IAW AEL G ___________________________________ (Signature and Date) .13 Perform pipe repair using a soft patch IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .14 Perform pipe repair using jubilee patch IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .15 Perform pipe repair using a EWARP IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date)

182


Questions 307.2.16 Inventory and inspect a banding kit IAW AEL G ___________________________________ (Signature and Date) .17 Perform pipe repair using a banding kit IAW AEL A B C D E F G ___________________________________ (Signature and Date) .18 Restore repaired piping systems IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .19 Rig, operate, and secure, and stow P-100 IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .20 Rig and operate P-100 for deep suction IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .21 Rig, operate, secure, and stow a portable eductor IAW

NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date) .22 Rig, operate, secure, and stow an electric submersible pump

IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date)


183

307 ADVANCED DAMAGE CONTROL (DC) (CONT’D) 307.3 INFREQUENT TASKS For the infrequent tasks listed below:

A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What parameters must be monitored? F. How are the monitored parameters changed by this infrequent task? G. What conditions require this infrequent task? H. Satisfactorily perform or simulate this infrequent task.

Questions

307.3.1 Use submersible pumps in tandem IAW NSTM 555 A B C D E G H ___________________________________ (Signature and Date) .2 Dewater using a P-100 pump with an eductor IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .3 Dewater contaminated water/fuel/hot water IAW NWP 3-20.31 A B C D E G H ___________________________________ (Signature and Date) .4 Rig a submersible pump with a suction hose IAW NWP 3-20.31 A B C D E G H ___________________________________ (Signature and Date) .5 Control/combat structural damage in a CBR contaminated

environment IAW NSTM 470 A B C D E G H ___________________________________ (Signature and Date)

COMPLETED .3 AREA COMPRISES 24% OF WATCHSTATION. 307.4 ABNORMAL CONDITIONS– None to be discussed.

184

307 ADVANCED DAMAGE CONTROL (DC) (CONT’D) 307.5 EMERGENCIES

For the emergencies listed below: A. What indications and alarms are received? B. What immediate action is required? C. What are the probable causes? D. What operating limitations are imposed? E. What other emergencies or malfunctions may occur if immediate action is not

taken? F. How does this emergency affect other operations/equipment/watchstations? G. Satisfactorily perform or simulate the immediate action for this emergency.

Questions

307.5.1 Pressurized sounding tube IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date)

.2 Progressive flooding IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date) .3 Ruptured fuel piping IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date) .4 Ruptured toxic liquid lines IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date) .5 Progressive crack/split seam IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date) .6 Shoring collapses IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date) .7 Loss of firemain IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date)

185


Questions 307.5.8 Loss of electrical power IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date) .9 OOC/inoperative fitting IAW NWP 3-20.31 A B C D E F G ___________________________________ (Signature and Date)


307.6 WATCHES 307.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Plugging Team Member (during drills) ___________________________________ (Signature and Date) Shoring Team Member (during drills) ___________________________________ (Signature and Date) Pipe Patching Team Member (during drills) ___________________________________ (Signature and Date) Dewatering Team Member (during drills) ___________________________________ (Signature and Date)


186

307 ADVANCED DAMAGE CONTROL (DC) (CONT’D) 307.7 EXAMINATIONS (OPTIONAL EXCEPT AS REQUIRED BY TYCOM/ISIC, ETC.) 307.7.1 EXAMINATIONS Pass a written examination




187


308 TEAM LEADER NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified TEAM LEADER (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

189

WATCHSTATION 308 308 TEAM LEADER

Estimated completion time: 6 weeks

NOTE: UPON COMPLETION OF THIS WATCHSTATION, PERSONNEL SHALL BE QUALIFIED TO

PERFORM IN THE FOLLOWING FUNCTIONS: TEAM LEADER. 308.1 PREREQUISITES



PRIOR TO FINAL WATCHSTATION QUALIFICATION. 308.1.1 WATCHSTATIONS FROM THIS PQS: 307 Advanced Damage Control (DC) Completed ___________________________________ (Qualifier and Date) 308.2 TASKS



Questions

308.2.1 Coordinate efforts of Attack Team using the thermal imager IAW NSTM 555 A B C D E F

___________________________________ (Signature and Date) .2 Lead efforts of Attack Team while accessing from above

IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .3 Lead efforts of Attack Team in an indirect attack IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date)

190

308 TEAM LEADER (CONT’D)

Questions 308.2.4 Coordinate efforts to overhaul the following IAW NSTM 555: a. Class A fire A B C D E F ___________________________________ (Signature and Date) b. Class B fire A B C D E F ___________________________________ (Signature and Date) c. Class C fire A B C D E F ___________________________________ (Signature and Date) d. Class D fire A B C D E F ___________________________________ (Signature and Date) e. Machinery space fire A B C D E F ___________________________________ (Signature and Date) .5 Report status of Attack Team progress to Scene Leader

IAW NSTM 555 A B C D F ___________________________________ (Signature and Date) .6 Determine damage in affected space and make reports

to Scene Leader IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .7 Direct evacuation of the Attack Team IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date)

191


Questions 308.2.8 Assist in the employment of heat management techniques

IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .9 Lead efforts of Attack Team in fog attack IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date)


A. What are the steps of this procedure? B. What are the reasons for each step? C. What safety precautions must be observed? D. What conditions require this infrequent task? E. Satisfactorily perform or simulate this infrequent task.

Questions

308.3.1 Lead efforts to control/combat a fire in a CBR contaminated environment IAW NSTM 555 A B C D E

___________________________________ (Signature and Date) .2 Lead efforts of the Attack Team in controlling/extinguishing

a fire involving a weapon IAW NSTM 555 A B C D E ___________________________________ (Signature and Date) .3 Lead efforts of the Attack Team to combat a ventilation system fire

IAW NSTM 555 A B C D E ___________________________________ (Signature and Date) .4 Demonstrate the ability to desmoke a space adjacent to the weather

deck by using a vari-nozzle IAW NSTM 555 A B C D E ___________________________________ (Signature and Date)

192


Questions 308.3.5 Lead efforts of Attack Team during vertical trunk access

IAW NSTM 555 A B C D E ___________________________________ (Signature and Date) .6 Assist in the employment of active desmoking procedures

IAW NSTM 555 A B C D E ___________________________________ (Signature and Date)

COMPLETED .3 AREA COMPRISES 24% OF WATCHSTATION. 308.4 ABNORMAL CONDITIONS– None to be discussed. 308.5 EMERGENCIES




Questions

308.5.1 Ruptured hose in the fire-affected space IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .2 Loss of one or more Attack Team members while combating

the fire IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .3 Fire out of control IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date)


193

308 TEAM LEADER (CONT’D) 308.6 WATCHES 308.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Team Leader (during drills) (4 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

COMPLETED .6 AREA COMPRISES 16% OF WATCHSTATION. 308.7 EXAMINATIONS (OPTIONAL EXCEPT AS REQUIRED BY TYCOM/ISIC, ETC.) 308.7.1 EXAMINATIONS Pass a written examination




195


309 ADVANCED CHEMICAL, BIOLOGICAL, AND

RADIOLOGICAL (CBR) DEFENSE PERSON NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified ADVANCED CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE PERSON (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

197

WATCHSTATION 309 309 ADVANCED CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR)

DEFENSE PERSON




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 309.1.1 Schools: NKO ILE Dry Filter Unit (DFU) (CNE-DFU-1.0) (REQUIRED) Completed ___________________________________ (Qualifier and Date) NKO ILE Improved (Chemical Agent) Point Detection System (IPDS)

(CNE-IPDS-1.0) (REQUIRED) Completed ___________________________________ (Qualifier and Date) NKO ILE Navy Shipboard Collective Protection System (CPS) and Navy Selected

Area Collective Protection System (SACPS) (NAVSEA-CPS-1.0) (REQUIRED) (If applicable)

Completed ___________________________________ (Qualifier and Date) NKO ILE Joint Biological Point Detection System (JBPDS) Familiarization

(CNE-JBPDS-0001) (REQUIRED) (If applicable) Completed ___________________________________ (Qualifier and Date) .2 WATCHSTATIONS FROM THIS PQS:

301-306 Basic Damage Control (DC) Completed ___________________________________ (Qualifier and Date)

198

309 ADVANCED CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE PERSON (CONT’D)

309.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What safety precautions must be observed? F. What parameters/operating limits must be monitored? G. Satisfactorily perform this task. H. Satisfactory simulate performance of this task.

Questions

309.2.1 Inventory DECON equipment IAW NSTM 470 G H ___________________________________ (Signature and Date) .2 Decontaminate topside/external area IAW NSTM 470 (2 times) A B C D E F G H ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .3 Decontaminate internal area IAW NSTM 470 (2 times) A B C D E F H ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .4 Process personnel casualties through a CCA/DECONDECON

station IAW NSTM 470 (2 times) A B C D E F H ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

199


Questions

309.2.5 Process personnel casualties through a CTA/CPS casualty DECON station IAW NSTM 470 (2 times) A B C D E H

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .6 Properly dispose and/or decontaminate DECON equipment

IAW NSTM 470 (2 times) A B C E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .7 Test, operate, and conduct on-station monitoring and internal/

external survey for radiological contamination using multi-function radiac IAW NSTM 470 (2 times) A B C D E F G

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .8 Conduct on-station monitoring and internal survey for

chemical agents and report results using the M/256 A-1 chemical detection training kit IAW AEL (2 times) A B C D E F G

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .9 Post, read, and report results of M8 and M9 paper

IAW NSTM 470 A B C D E F H ___________________________________ (Signature and Date)

200


Questions

309.2.10 Conduct on-station monitoring for chemical agents (M-256, IPDS) IAW NSTM 470 (2 times) A B C D E F G

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .11 Conduct rapid and detailed internal and external detailed chemical

surveys using M8/ M9 (simulated) paper and a M256A1 chemical detection training kit IAW AEL (2 times) A B C D E F G

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .12 Conduct rapid and detailed radiological internal/external surveys

(MFR) IAW NSTM 470 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .13 Collect biological sample using the DFU IAW NSTM 470 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .14 Collect biological sample using the JBPDS IAW

NSTM 470 (2 times) A B C D E F G ___________________________________ (Signature and Date) ____________________________________ (Signature and Date)

201


Questions

309.2.15 Collect suspected surface biological sample for presumptive test using biological response kit IAW AEL A B C E F G

___________________________________ (Signature and Date) .16 Package presumptive positive biological sample for delivery/

shipment to confirmatory lab IAW NSTM 470 (2 times) A B C E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .17 Isolate, mark, record, and report contaminated areas IAW

NSTM 470 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .18 Setup a DECONDECONDECON station IAW CBR Bill

(2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .19 Test/operate DECON showers/hand held nozzles IAW CBR Bill A B C D E F G ___________________________________ (Signature and Date) .20 Demonstrate personnel routes to a DECON/casualty

DECON station, casualty triage area, casualty collection station IAW CBR Bill A B C D E F G


202


Questions

309.2.21 Perform radiation background readings in DECON station IAW CBR Bill (2 times) A B C D E F G

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .22 Read the IM-270 dosimeter and record the reading in the

IM-270 Log IAW NSTM 470 A B C D E F G ___________________________________ (Signature and Date) .23 Decontaminate and secure a DECON station

and CCA/CTA during recovery phase IAW CBR Bill A B C D E F G ___________________________________ (Signature and Date) .24 Demonstrate gross DECON procedures prior to

CCA/CTA entry IAW CBR Bill (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .25 Remove protective clothing from contaminated personnel

IAW NSTM 470 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

203


Questions

309.2.26 Properly dispose of contaminated clothing/equipment IAW NSTM 470 (2 times) A B C E F G

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .27 Maintain a disposition record of personnel exiting a

DECON station IAW CBR Bill (2 times) A B C G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .28 Control traffic through a DECON station IAW CBR Bill (2 times) A B C D E G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .29 Demonstrate proper procedures when detecting radiation

on personnel using MFR IAW NSTM 470 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .30 Test for phosgene gas using the Draeger and Drager tubes

IAW EOSS (2 times) A B C D E F H ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)


204


309.3 INFREQUENT TASKS – None to be discussed.

309.4 ABNORMAL CONDITIONS


A. What indications and alarms are received? B. What immediate action is required? C. What operating limitations are imposed? D. What emergencies or malfunctions may occur if immediate action is not

taken? E. How does this condition affect other operations/equipment/watchstations? F. What follow-up action is required? G. Satisfactorily perform or simulate the corrective/immediate action for this

abnormal condition.

Questions 309.4.1 Malfunctioning or contaminated radiac IAW NSTM 555 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .2 Loss of CPS/SACPS zone pressure IAW NSTM 470 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .3 Over-pressurization of CPS/SACPS zone IAW NSTM 470

(2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

205


Questions

309.3.4 Low CPS/SACPS zone pressure IAW NSTM 470 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

COMPLETED .4 AREA COMPRISES 10% OF WATCHSTATION. 309.5 EMERGENCIES


A. What indications and alarms are received? B. What immediate action is required? C. What are the probable causes? D. What other emergencies or malfunctions may occur if immediate action is not

taken? E. How does this emergency affect other operations/equipment/watchstations? F. Satisfactorily perform or simulate the immediate action for this emergency.

Questions

309.5.1 Contaminated personnel casualty IAW NSTM 470 (2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .2 Contaminated DECON station IAW NSTM 470 (2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .3 Low CPS zone pressure IAW NSTM 470 (2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

206


Questions

309.5.4 Loss of CPS/SACPS zone pressure in CBR environment IAW NSTM 470 (2 times) A B C D E F

___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

.5 Pressure boosting CPS/SACPS zone IAW NSTM 470 A B C D E F ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 10% OF WATCHSTATION. 309.6 WATCHES 309.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Radiac Operator ___________________________________ (Signature and Date) Chemical Detector Operator ___________________________________ (Signature and Date) Chemical Monitor ___________________________________ (Signature and Date) Radiological Monitor ___________________________________ (Signature and Date)

207


309.6.1 Contamination Control Area (CCA) Operator ___________________________________ (Signature and Date) Personnel DECON Station Operator (3 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

COMPLETED .6 AREA COMPRISES 10% OF WATCHSTATION. 309.7 EXAMINATIONS (OPTIONAL EXCEPT AS REQUIRED BY TYCOM/ISIC, ETC.)

309.7.1 EXAMINATIONS Pass a written examination ___________________________________ (Signature and Date) .2 EXAMINATIONS Pass an oral examination board ___________________________________ (Signature and Date)

209


310 ADVANCED FIRST-AID/STRETCHER BEARER NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified ADVANCED FIRST-AID/STRETCHER BEARER (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

211

WATCHSTATION 310 310 ADVANCED FIRST-AID/STRETCHER BEARER




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 310.1.1 WATCHSTATIONS FROM THIS PQS: 306 Basic Damage Control (DC) Completed ___________________________________ (Qualifier and Date) 310.2 TASKS



Questions

310.2.1 Demonstrate triage procedures IAW NAVEDTRA 14295 A B C D E F ___________________________________ (Signature and Date) .2 Demonstrate CPR IAW NAVEDTRA 14295 A B C D E F ___________________________________ (Signature and Date) .3 Transport personnel casualties through a passageway IAW

NSTM 555 A B C D E F ___________________________________ (Signature and Date) .4 Transport personnel casualties up and down ladders IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date)

212

310 ADVANCED FIRST-AID/STRETCHER BEARER (CONT’D)

Questions 310.2.5 Transport personnel casualties through a scuttle IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .6 Transport personnel casualties through a hatch IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .7 Transport personnel casualties through a vertical trunk IAW

NSTM 555 A B C D E F ___________________________________ (Signature and Date) .8 Transport personnel casualties to the designated battle dressing

station IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .9 Locate, inventory, and inspect a first-aid kit/box IAW AEL A F ___________________________________ (Signature and Date)


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What safety precautions must be observed? F. Satisfactorily perform or simulate this infrequent task.

Questions

310.3.1 Constrain/assist with a panicked or irrational personnel IAW SOP A B C D E F ___________________________________ (Signature and Date)

213

310 ADVANCED FIRST-AID/STRETCHER BEARER (CONT’D)

Questions 310.3.2 Demonstrate the use of the bag-valve-mask system IAW

NAVEDTRA 14295 A B C D E F ___________________________________ (Signature and Date)





Questions

310.5.1 Inability to clear obstructed airway A B C D E F G H ___________________________________ (Signature and Date)


214

310 ADVANCED FIRST-AID/STRETCHER BEARER (CONT’D) 310.6 WATCHES 310.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Stretcher Bearer (during drills) (4 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)



215


311 AQUEOUS FILM FORMING FOAM (AFFF)/TRANSFER

STATION OPERATOR NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified AQUEOUS FILM FORMING FOAM (AFFF)/TRANSFER STATION OPERATOR (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

217

WATCHSTATION 311 311 AQUEOUS FILM FORMING FOAM (AFFF)/TRANSFER STATION

OPERATOR




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 311.1.1 WATCHSTATIONS FROM THIS PQS: 306 Basic Damage Control (DC) Completed ___________________________________ (Qualifier and Date) .2 FUNDAMENTALS FROM THIS PQS: 109 Conflagration Completed ___________________________________ 5% of Watchstation (Qualifier and Date) .3 SYSTEMS FROM THIS PQS: 209 Aqueous Film Forming Foam (AFFF) Completed ___________________________________ 5% of Watchstation (Qualifier and Date) 311.2 TASKS



Questions

311.2.1 Man an AFFF station and establish communications IAW SOP A B C D G ___________________________________ (Signature and Date)

218

311 AQUEOUS FILM FORMING FOAM (AFFF)/TRANSFER STATION

OPERATOR (CONT’D)

Questions 311.2.2 Verify system alignment using applicable documentation IAW SOP A B C D E F G ___________________________________ (Signature and Date) .3 Operate an AFFF system IAW SOP (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .4 Identify on-station alarms and indicators IAW SOP G ___________________________________ (Signature and Date) .5 Replenish AFFF tanks manually IAW SOP A B C D E F G ___________________________________ (Signature and Date) .6 Operate the AFFF transfer system IAW SOP A B C D E F G ___________________________________ (Signature and Date) .7 Operate an AFFF mixing station IAW SOP A B C D E F G ___________________________________ (Signature and Date)


219


OPERATOR (CONT’D) 311.3 INFREQUENT TASKS For the infrequent tasks listed below:

A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What conditions require this infrequent task? F. Satisfactorily perform or simulate this infrequent task.

Questions

311.3.1 Manually operate an AFFF system IAW SOP A B C D E F ___________________________________ (Signature and Date) .2 Align system for operation using cross-connect IAW SOP A B C D E F ___________________________________ (Signature and Date)

COMPLETED .3 AREA COMPRISES 6% OF WATCHSTATION. 311.4 ABNORMAL CONDITIONS




abnormal condition.

Questions 311.4.1 AFFF transfer system is unusable or fails IAW SOP A B C D E F G H ___________________________________ (Signature and Date)


220


OPERATOR (CONT’D) 311.5 EMERGENCIES




Questions

311.5.1 Loss of electrical power IAW EOSS A B C D E F G ___________________________________ (Signature and Date) .2 Loss of firemain pressure IAW EOSS A B C D E F G ___________________________________ (Signature and Date) .3 Loss of AFFF IAW EOSS A B C D E F G ___________________________________ (Signature and Date) .4 Failed valves/SOPV IAW EOSS A B C D E F G ___________________________________ (Signature and Date) .5 Loss of communications IAW EOSS A B C D E F G ___________________________________ (Signature and Date)


221


OPERATOR (CONT’D) 311.6 WATCHES 311.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Aqueous Film Forming Foam (AFFF) Station Operator (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) Aqueous Film Forming Foam (AFFF) Transfer Station Operator ___________________________________ (Signature and Date)



223


312 REPAIR PARTY INVESTIGATOR NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified REPAIR PARTY INVESTIGATOR (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

225

WATCHSTATION 312 312 REPAIR PARTY INVESTIGATOR




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 312.1.1 WATCHSTATIONS FROM THIS PQS: 307 Advanced Damage Control (DC) Completed ___________________________________ (Qualifier and Date) 309 Advanced Chemical, Biological, and Radiological (CBR) Defense Person Completed ___________________________________ (Qualifier and Date) 310 Advanced First-aid/Stretcher Bearer Completed ___________________________________ (Qualifier and Date) 311 Aqueous Film Forming Foam (AFFF)/Transfer Station Operator Completed ___________________________________ (Qualifier and Date) 312.2 TASKS



Questions

312.2.1 Conduct a continuous investigation of the assigned area IAW NSTM 555 A B C D E G


226

312 REPAIR PARTY INVESTIGATOR (CONT’D)

Questions 312.2.2 Make reports to the Scene Leader and controlling

station using standard phraseology and symbology IAW NSTM 555 A B C D G ___________________________________ (Signature and Date) .3 Sound tanks and voids IAW NSTM 555 A B E F G ___________________________________ (Signature and Date) .4 Investigate watertight closures IAW NSTM 555 A B C D E G ___________________________________ (Signature and Date) .5 Investigate bulkhead, deck, and overhead penetrations

IAW NSTM 555 A B C D E G ___________________________________ (Signature and Date) .6 Inventory and inspect investigator kit IAW AEL G ___________________________________ (Signature and Date) .7 Monitor fire, flooding, and smoke/toxic gas boundaries

IAW NSTM 555 A B C D E G ___________________________________ (Signature and Date) .8 Determine the effectiveness of installed firefighting and

desmoking systems IAW NSTM 555 (2 times) A B C D E F G ___________________________________ (Signature and Date)


312.3 INFREQUENT TASKS – None.

227

312 REPAIR PARTY INVESTIGATOR (CONT’D) 312.4 ABNORMAL CONDITIONS




abnormal condition.

Questions 312.4.1 Access blocked/locked IAW SOP A B D E F H ___________________________________ (Signature and Date) .2 Inability to locate other investigator IAW SOP B C D E F G H ___________________________________ (Signature and Date) .3 Smoke/fire/flooding/toxic boundaries compromised

IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date)


228

312 REPAIR PARTY INVESTIGATOR (CONT’D) 312.5 EMERGENCIES




Questions

312.5.1 Class A fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .2 Class B fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .3 Class C fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .4 Class D fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .5 Magazine fire IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .6 Flooding IAW EOCC A B C D E F G H ___________________________________ (Signature and Date) .7 Structural damage IAW EOCC A B C D E F G H ___________________________________ (Signature and Date)

229

312 REPAIR PARTY INVESTIGATOR (CONT’D)

Questions 312.5.8 Toxic gas/HM spill (installed systems) IAW NSTM 555 A B C D E F G H ___________________________________ (Signature and Date) .9 Personnel casualties IAW SOP A B C D E F G H ___________________________________ (Signature and Date) .10 Loss of electrical power IAW EOSS A B C D E F G H ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 35% OF WATCHSTATION. 312.6 WATCHES 312.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Repair Party Investigator (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)



231


313 SCENE LEADER NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified SCENE LEADER (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

233

WATCHSTATION 313 313 SCENE LEADER




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 313.1.1 WATCHSTATIONS FROM THIS PQS: 308 Team Leader Completed ___________________________________ (Qualifier and Date) 312 Repair Party Investigator Completed ___________________________________ (Qualifier and Date) .2 SYSTEMS FROM THIS PQS: 222 Computer Based Damage Control (DC) Management Completed ___________________________________ 2% of Watchstation (Qualifier and Date) 313.2 TASKS



Questions

313.2.1 Read and review ship’s RPM IAW SOP F ___________________________________ (Signature and Date)

234

313 SCENE LEADER (CONT’D)

Questions 313.2.2 Make required reports to the controlling station using standard

phraseology and symbology for the following scenarios IAW NSTM 555: a. Fire A B C D F ___________________________________ (Signature and Date) b. Flood A B C D F ___________________________________ (Signature and Date) c. Structural damage A B C D F ___________________________________ (Signature and Date) d. Toxic gas/HAZMAT spill A B C D F ___________________________________ (Signature and Date) e. CBR environnent A B C D F ___________________________________ (Signature and Date) .3 Determine method of fire attack IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .4 Determine the need for multi-hose attack IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .5 Determine the protective clothing required for Attack Team

IAW NSTM 555 A B C E F ___________________________________ (Signature and Date)

235


Questions 313.2.6 Determine/direct the rotation of personnel IAW NSTM 555 A B C D E F ___________________________________ (Signature and Date) .7 Direct personnel in active desmoking operations IAW NSTM 555

(2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .8 Determine method and direct personnel to desmoke

IAW NSTM 555 (2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .9 Direct atmospheric testing A B C D E F ___________________________________ (Signature and Date) .10 Determine the method and direct personnel to control

flooding IAW NSTM 555 (2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .11 Determine the method and direct piping isolation and

patching IAW NSTM 555 (2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

236


Questions 313.2.12 Determine the method and direct personnel in

dewatering IAW NSTM 079, Vol. 2 (2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .13 Determine the method and direct personnel to repair structural

damage IAW NSTM 079, Vol. 2 (2 times) A B C D E F ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .14 Determine the method and direct rescue personnel IAW

NSTM 079, Vol. 2 A B C D E F ___________________________________ (Signature and Date)


313.3 INFREQUENT TASKS For the infrequent tasks listed below:


Questions

313.3.1 Direct personnel to control/extinguish a fire involving ordnance IAW NSTM 079, Vol. 2 A B C D E F G


237


Questions 313.3.2 Direct personnel in a vertical trunk entry IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .3 Direct personnel in R and A response IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .4 Combat casualties in a CBR environment IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date)


313.4 ABNORMAL CONDITIONS




abnormal condition.

Questions 313.4.1 Failure of an installed firefighting system to activate

IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .2 Access blocked/locked IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .3 Loss of communications IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date)


238

313 SCENE LEADER (CONT’D) 313.5 EMERGENCIES




Questions

313.5.1 Major conflagration IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .2 Reflash IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .3 Boundaries compromised IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .4 Loss of firemain IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .5 Progressive flooding IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .6 Explosion IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .7 Personnel casualties A B C D E F G ___________________________________ (Signature and Date)

239


Questions 313.5.8 Toxic gas/HAZMAT spill (installed systems) IAW NSTM 470 A B C D E F G ___________________________________ (Signature and Date) .9 Spread of CBR contamination IAW CBR BILL A B C D E F G ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 15% OF WATCHSTATION. 313.6 WATCHES 313.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Scene Leader (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)



241


314 CONFLAGRATION STATION OPERATOR NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified CONFLAGRATION STATION OPERATOR (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

243

WATCHSTATION 314 314 CONFLAGRATION STATION OPERATOR




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 314.1.1 WATCHSTATIONS FROM THIS PQS: 311 Aqueous Film Forming Foam (AFFF)/Transfer Station Operator Completed ___________________________________ (Qualifier and Date) .2 SYSTEMS FROM THIS PQS: 218 Conflagration Station Completed ___________________________________ 5% of Watchstation (Qualifier and Date) 314.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What means of communications are used? D. What safety precautions must be observed? E. Satisfactorily perform this task.

Questions

314.2.1 Maintain log IAW SOP A E ___________________________________ (Signature and Date) .2 Monitor hangar deck security and make reports IAW SOP A B C E ___________________________________ (Signature and Date)

244

314 CONFLAGRATION STATION OPERATOR (CONT’D)

Questions 314.2.3 Monitor vehicle/equipment stowage IAW SOP A B D E ___________________________________ (Signature and Date) .4 Monitor fueling stations IAW NSTM 079, Vol. 2 A B C D E ___________________________________ (Signature and Date)


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What is the alarm set point? F. What parameters must be monitored? G. How are the monitored parameters changed by this infrequent task? H. What conditions require this infrequent task? I. Satisfactorily perform or simulate this infrequent task.

Questions

314.3.1 Energize/secure all designated sprinkler groups IAW NSTM 079, Vol. 2 A B C D E F G H I

___________________________________ (Signature and Date) .2 Monitor ordnance handling IAW NSTM 079, Vol. 2 A B C D E F G H I ___________________________________ (Signature and Date) .3 Monitor fueling and defueling open fuel cells IAW

NSTM 079, Vol. 2 A B C D E F G H I ___________________________________ (Signature and Date)

245


Questions 314.3.4 Operate a divisional door IAW EOSS A B C D E F G H I ___________________________________ (Signature and Date)

.5 Operate a deck edge door IAW EOSS A B C D E F G H I ___________________________________ (Signature and Date)





Questions

314.5.1 Liquid oxygen leak/spill IAW EOCC A B C D E F G ___________________________________ (Signature and Date) .2 Fuel spill IAW EOCC A B C D E F G ___________________________________ (Signature and Date) .3 Loss of electrical power IAW EOSS A B C D E F G ___________________________________ (Signature and Date) .4 Fire IAW EOCC A B C D E F G ___________________________________ (Signature and Date)

246


Questions 314.5.5 Explosion IAW EOCC A B C D E F G ___________________________________ (Signature and Date) .6 Smoke IAW EOCC A B C D E F G ___________________________________ (Signature and Date) .7 Runaway aircraft or vehicle IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date) .8 Loss of communications IAW EOSS A B C D E F G ___________________________________ (Signature and Date) .9 Inadvertent activation of divisional/deck edge doors IAW EOSS A B C D E F G ___________________________________ (Signature and Date) .10 Inadvertent activation of sprinkler systems IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date) .11 Loss of firemain IAW NSTM 555 A B C D E F G ___________________________________ (Signature and Date)


247

314 CONFLAGRATION STATION OPERATOR (CONT’D) 314.6 WATCHES 314.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Conflagration Station Operator (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)





249


315 CRASH AND SALVAGE CREWMAN/RESCUEMAN NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified CRASH AND SALVAGE CREWMAN/RESCUEMAN (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

251

WATCHSTATION 315 315 CRASH AND SALVAGE CREWMAN/RESCUEMAN




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 315.1.1 SYSTEMS FROM THIS PQS: 217 Crash and Salvage Equipment Completed ___________________________________ 2% of Watchstation (Qualifier and Date) 315.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What safety precautions must be observed? D. What parameters/operating limits must be monitored? E. Satisfactorily perform this task.

Questions

315.2.1 Inspect and don proximity suits and SCBA IAW NSTM 077 A B C D E ___________________________________ (Signature and Date) .2 Inspect and operate aviation forcible entry equipment

IAW NAVAIR 80R-14 A B C E ___________________________________ (Signature and Date) .3 Inventory and inspect tool roll IAW NAVAIR 80R-14 E ___________________________________ (Signature and Date)

252

315 CRASH AND SALVAGE CREWMAN/RESCUEMAN (CONT’D)

Questions 315.2.4 Inspect and don PPE IAW NSTM 077 A B D E ___________________________________ (Signature and Date)


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What parameters must be monitored? F. How are the monitored parameters changed by this infrequent task? G. What conditions require this infrequent task? H. Satisfactorily perform or simulate this infrequent task.

Questions

315.3.1 Electrically isolate a helicopter IAW NAVAIR 80R-14 (2 times) A B C D G H ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .2 Operate aircraft seat restraint equipment IAW NAVAIR

80R-14 (2 times) A B C D G H ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .3 Rescue personnel from a helicopter IAW NAVAIR 80R-14 (2 times) A B C D G H ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

253


Questions 315.3.4 Activate and use an AFFF hose reel/in-line educator IAW SOP A B C D E F G H ___________________________________ (Signature and Date)





Questions

315.5.1 Aircraft fireIAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date) .2 Aircraft crash IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date) .3 Reflash IAW NAVAIR 80R-14 A B C E G ___________________________________ (Signature and Date) .4 Aircraft suspended over the side IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date)

254


Questions 315.5.5 Ordnance on aircraft/deck IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date) .6 Fuel spill IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date) .7 Jammed door/canopy on aircraft IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date) .8 Thermal runaway IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date) .9 Jettisoned auxiliary tank IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 40% OF WATCHSTATION. 315.6 WATCHES 315.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Crash and Salvage Crewman (during drills) ___________________________________ (Signature and Date) Rescueman (during drills) ___________________________________ (Signature and Date)


255

315 CRASH AND SALVAGE CREWMAN/RESCUEMAN (CONT’D) 315.7 EXAMINATIONS (OPTIONAL EXCEPT AS REQUIRED BY TYCOM/ISIC, ETC.)


257


316 CRASH AND SALVAGE SCENE LEADER NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified CRASH AND SALVAGE SCENE LEADER (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

259

WATCHSTATION 316 316 CRASH AND SALVAGE SCENE LEADER




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 316.1.1 WATCHSTATIONS FROM THIS PQS: 313 Scene Leader Completed ___________________________________ (Qualifier and Date) 315 Crash and Salvage Crewman/Rescueman Completed ___________________________________ (Qualifier and Date) 316.2 TASKS



Questions

316.2.1 Supervise prepositioning and inspection of crash and salvage equipmentIAW NAVAIR 80R-14 A B C D E F

___________________________________ (Signature and Date) .2 Establish communications IAW NAVAIR 80R-14 A B F ___________________________________ (Signature and Date)


260

316 CRASH AND SALVAGE SCENE LEADER (CONT’D) 316.3 INFREQUENT TASKS For the infrequent tasks listed below:


316.3.1 Direct activities of a Crash and Salvage Fire Team

IAW NAVAIR 80R-14 (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .2 Direct activities of a Rescue Team IAW NAVAIR 80R-14

(2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .3 Direct the jettisoning of an aircraft IAW NAVAIR 80R-14 A B C D E F G ___________________________________ (Signature and Date)

COMPLETED .3 AREA COMPRISES 60% OF WATCHSTATION. 316.4 ABNORMAL CONDITIONS – None to be discussed. 316.5 EMERGENCIES – None to be discussed.

261

316 CRASH AND SALVAGE SCENE LEADER (CONT’D) 316.6 WATCHES 316.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Crash and Salvage Scene Leader (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)





263


317 COMPUTER BASED DAMAGE CONTROL (DC) MANAGEMENT SYSTEM AND SOFTWARE OPERATOR

NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified COMPUTER BASED DAMAGE CONTROL (DC) MANAGEMENT SYSTEM AND SOFTWARE OPERATOR (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

265

WATCHSTATION 317 317 COMPUTER BASED DAMAGE CONTROL (DC) MANAGEMENT SYSTEM

AND SOFTWARE OPERATOR




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 317.1.1 WATCHSTATIONS FROM THIS PQS: 306 Basic Damage Control (DC) Completed ___________________________________ (Qualifier and Date) .2 SYSTEMS FROM THIS PQS: 222 Computer Based Damage Control (DC) Management Completed ___________________________________ 5% of Watchstation (Qualifier and Date) 317.2 TASKS


A. What are the steps of this procedure? B. Satisfactorily perform this task.

Questions

317.2.1 Log on system IAW SOP A B ___________________________________ (Signature and Date) .2 Use the event function IAW SOP B ___________________________________ (Signature and Date) .3 Use the stability function IAW SOP B ___________________________________ (Signature and Date)

266



Questions 317.2.4 Use the readiness function IAW SOP B ___________________________________ (Signature and Date) .5 Use the CCOL function IAW SOP B ___________________________________ (Signature and Date) .6 Use the compartment KILL CARD function IAW SOP B ___________________________________ (Signature and Date) .7 Use the portable assets function IAW SOP B ___________________________________ (Signature and Date) .8 Access the DC plate function IAW SOP B ___________________________________ (Signature and Date) .9 Use the plot damage function IAW SOP B ___________________________________ (Signature and Date) .10 Use the view flooding effects function IAW SOP B ___________________________________ (Signature and Date) .11 Use the zoom function IAW SOP B ___________________________________ (Signature and Date) .12 Use the find function IAW SOP B ___________________________________ (Signature and Date)

267



Questions 317.2.13 Use the overlays function IAW SOP B ___________________________________ (Signature and Date) .14 Display various systems IAW SOP B ___________________________________ (Signature and Date) .15 Use the BA function IAW SOP B ___________________________________ (Signature and Date) .16 Use the configuration setting IAW SOP B ___________________________________ (Signature and Date)

COMPLETED .2 AREA COMPRISES 80% OF WATCHSTATION. 317.3 INFREQUENT TASKS – None to be discussed. 317.4 ABNORMAL CONDITIONS


A. What indications and alarms are received? B. What immediate action is required? C. What are the probable causes? D. What operating limitations are imposed? E. How does this condition affect other operations/equipment/watchstations? F. What follow-up action is required? G. Satisfactorily perform or simulate the corrective/immediate action for this

abnormal condition.

Questions 317.4.1 Computer malfunction IAW SOP A B C D E F G ___________________________________ (Signature and Date)


268


AND SOFTWARE OPERATOR 317.5 EMERGENCIES



taken? F. What must be monitored during the procedure? G. How does this emergency affect other operations/equipment/watchstations? H. What follow-up action is required? I. Satisfactorily perform or simulate the immediate action for this emergency.

Questions

317.5.1 Class C fire IAW EOCC A B C D E F G H I ___________________________________ (Signature and Date) .2 Loss of power IAW EOSS A B C D E F G H I ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 10% OF WATCHSTATION. 317.6 WATCHES – None to be discussed. 317.7 EXAMINATIONS (OPTIONAL EXCEPT AS REQUIRED BY TYCOM/ISIC, ETC.) 317.7.1 EXAMINATIONS Pass a written examination




269


318 REPAIR PARTY LEADER NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified REPAIR PARTY LEADER (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

271

WATCHSTATION 318 318 REPAIR PARTY LEADER




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 318.1.1 SCHOOL: Repair Party Leader (K-495-0040) (REQUIRED) Completed ___________________________________ (Qualifier and Date) .2 WATCHSTATIONS FROM THIS PQS: 314 Conflagration Station Operator Completed ___________________________________ (Qualifier and Date) 316 Crash and Salvage Scene Leader (RECOMMENDED) Completed ___________________________________ (Qualifier and Date) 317 Computer Based Damage Control (DC) Management System and Software

Operator Completed ___________________________________ (Qualifier and Date) .3 FUNDAMENTALS FROM THIS PQS: 114 Stability Completed ___________________________________2% of Watchstation (Qualifier and Date)

272

318 REPAIR PARTY LEADER (CONT’D) 318.2 TASKS


A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. Satisfactorily perform this task.

Questions

318.2.1 Locate, identify, and demonstrate the ability to use the following IAW SOP:

a. RPM E ___________________________________ (Signature and Date) b. DC Book E ___________________________________ (Signature and Date) .2 Supervise the training of Repair Party personnel IAW SOP (2 times) C E ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .3 Maintain PQS assignments/qualifications for assigned personnel

IAW SOP E ___________________________________ (Signature and Date) .4 Coordinate the efforts of repair parties to combat/control IAW

COMNAVSURWAR 3541-1: a. Fire/smoke (2 times) A B C D E ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

273

318 REPAIR PARTY LEADER (CONT’D)

Questions 318.2.4 b. Toxic gas/HAZMAT spill (2 times) A B C D E ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) c. Flooding (2 times) A B C D E ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) d. Structural damage (2 times) A B C D E ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) e. Personnel casualties A B C D E ___________________________________ (Signature and Date) .5 Coordinate efforts with other repair parties IAW

COMNAVSURWAR 3541-1 A B C D E ___________________________________ (Signature and Date)


274

318 REPAIR PARTY LEADER (CONT’D) 318.3 INFREQUENT TASKS For the infrequent tasks listed below:

A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What conditions require this infrequent task? F. Satisfactorily perform or simulate this infrequent task.

Questions

318.3.1 Assume duties as Secondary DC Central IAW SOP A B C D E F ___________________________________ (Signature and Date) .2 Coordinate efforts of repair party in CBR defense – chemical IAW

COMNAVSURWAR 3541-1 A B C D E F ___________________________________ (Signature and Date) .3 Coordinate efforts of repair party in CBR defense – biological IAW

COMNAVSURWAR 3541-1 A B C D E F ___________________________________ (Signature and Date) .4 Coordinate efforts of repair party in CBR defense - radiological

IAW COMNAVSURWAR 3541-1 A B C D E F ___________________________________ (Signature and Date) .5 Evacuate/relocate and reestablish a DC repair station IAW

COMNAVSURWAR 3541-1 A B C D E F ___________________________________ (Signature and Date)


275

318 REPAIR PARTY LEADER (CONT’D) 318.4 ABNORMAL CONDITIONS– None to be discussed. 318.5 EMERGENCIES




Questions

318.5.1 Major conflagration IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .2 Mass casualties IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date) .3 Loss of communications IAW NSTM 079, Vol. 2 A B C D E F G H ___________________________________ (Signature and Date)

COMPLETED .5 AREA COMPRISES 10% OF WATCHSTATION. 318.6 WATCHES 318.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Repair Party Leader (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)


276

318 REPAIR PARTY LEADER (CONT’D) 318.7 EXAMINATIONS (OPTIONAL EXCEPT AS REQUIRED BY TYCOM/ISIC, ETC.) 318.7.1 EXAMINATIONS Pass a written examination




277


319 REPAIR PARTY ELECTRICIAN NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified REPAIR PARTY ELECTRICIAN (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

279

WATCHSTATION 319 319 REPAIR PARTY ELECTRICIAN




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 319.1.1 WATCHSTATIONS FROM THIS PQS: 312 Repair Party Investigator (RECOMMENDED) Completed ___________________________________ (Qualifier and Date) .2 FUNDAMENTALS FROM THIS PQS: 115 Electrician Electrical Completed ___________________________________ (Qualifier and Date) 319.2 TASKS



Questions

319.2.1 Inventory and inspect an electrical repair kit IAW AEL G ___________________________________ (Signature and Date) .2 Don electrical safety equipment and demetalize IAW SOP A B F G ___________________________________ (Signature and Date)

280

319 REPAIR PARTY ELECTRICIAN (CONT’D)

Questions 319.2.3 Electrically isolate a space as directed IAW SOP (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .4 Locate electrical distribution systems and components in

an assigned area IAW SOP G ___________________________________ (Signature and Date) .5 Conduct electrical damage survey of affected spaces,

provide ETR, and submit a report IAW SOP (2 times) A B C D E G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .6 Check and assess installed ventilation systems prior to

their use in desmoking operations IAW SOP (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)


281

319 REPAIR PARTY ELECTRICIAN (CONT’D) 319.3 INFREQUENT TASKS For the infrequent tasks listed below:

A. What are the steps of this procedure? B. What are the reasons for each step? C. What control/coordination is required? D. What means of communications are used? E. What is the alarm set point? F. What parameters must be monitored? G. How are the monitored parameters changed by this infrequent task? H. What conditions require this infrequent task? I. Satisfactorily perform or simulate this infrequent task.

Questions

319.3.1 Don SCBA/toxic gas and electrically investigate/repair circuits inside smoke/fire boundaries IAW NSTM 300 A B C D E F G H I

___________________________________ (Signature and Date) .2 Rig/unrig casualty power system IAW NSTM 300 A B C D E F G H I ___________________________________ (Signature and Date) .3 Conduct emergency repairs to vital circuits IAW NSTM 300

(2 times) A B C D E F G I ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)


282

319 REPAIR PARTY ELECTRICIAN (CONT’D) 319.4 ABNORMAL CONDITIONS


A. What indications and alarms are received? B. What immediate action is required? C. Satisfactorily perform or simulate the corrective/immediate action for this

abnormal condition.

Questions 319.4.1 Casualty power terminal damaged IAW NSTM 300 A B C ___________________________________ (Signature and Date) .2 Casualty power cables missing IAW NSTM 300 A B C ___________________________________ (Signature and Date)

COMPLETED .4 AREA COMPRISES 12% OF WATCHSTATION. 319.5 EMERGENCIES – None to be discussed. 319.6 WATCHES 319.6.1 STAND THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Repair Party Electrician (during drills) (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)





283


320 DAMAGE CONTROL TRAINING TEAM (DCTT) MEMBER NAME______________________________ RATE/RANK____________________ This page is to be used as a record of satisfactory completion of designated sections of the Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of applicable sections either by written or oral examination, or by observation of performance. The examination or checkout need not cover every item; however, a sufficient number should be covered to demonstrate the examinee’s knowledge. Should supervisors give away their signatures, unnecessary difficulties can be expected in future routine operations. A copy of this completed page shall be kept in the individual’s training jacket. The trainee has completed all PQS requirements for this watchstation. Recommend designation as a qualified DAMAGE CONTROL TRAINING TEAM (DCTT) MEMBER (NAVEDTRA 43119-K). RECOMMENDED________________________________________DATE______________ Supervisor RECOMMENDED________________________________________DATE______________ Division Officer RECOMMENDED________________________________________DATE______________ Department Head QUALIFIED_____________________________________________DATE______________ Commanding Officer or Designated Representative SERVICE RECORD ENTRY________________________________DATE______________

285

WATCHSTATION 320 320 DAMAGE CONTROL TRAINING TEAM (DCTT) MEMBER




PRIOR TO FINAL WATCHSTATION QUALIFICATION. 320.1.1 WATCHSTATIONS FROM THIS PQS:

NOTE: DCTT MEMBERS SHALL BE PQS QUALIFIED UP TO 307. 308, 309 AT A

MINIMUM AND THE LEVEL OF THE WATCHSTATION THE MEMBER IS DESIGNATED TO

EVALUATE. 307 Advanced Damage Control (DC) Completed ___________________________________ (Qualifier and Date) 308 Team Leader Completed ___________________________________ (Qualifier and Date) 309 Advanced Chemical, Biological, and Radiological (CBR) Defense Person Completed ___________________________________ (Qualifier and Date)

286

320 DAMAGE CONTROL TRAINING TEAM (DCTT) MEMBER (CONT’D) 320.2 TASKS



Questions

320.2.1 Check closure log for accuracy and completeness prior to checking condition YOKE IAW ASA Check Sheet (2 times) A B F G

___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .2 Check material condition YOKE IAW ASA Check Sheet (2 times) A B F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .3 Check material condition ZEBRA IAW ASA Check Sheet (2 times) A B F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .4 Modified condition ZEBRA IAW ASA Check Sheet (2 times) A B C E G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

287

320 DAMAGE CONTROL TRAINING TEAM (DCTT) MEMBER (CONT’D)

Questions 320.2.5 Assist in developing a scenario including ORM for a class A

fire IAW TRAC (2 times) A B C G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .6 Assist in developing a scenario for a class B fire IAW TRAC (2 times) A B C G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .7 Assist in developing a scenario for a class C fire IAW TRAC (2 times) A B C G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .8 Assist in developing a scenario for a class D fire IAW TRAC A B C G ___________________________________ (Signature and Date) .9 Conduct a safety walk-through prior to conducting a drill

and report results IAW SOP (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) .10 Evaluate and critique a fire drill IAW SOP (2 times) A B C D E F G ___________________________________ (Signature and Date) ___________________________________ (Signature and Date)

288


Questions 320.2.11 Assist in developing a scenario for rescue and assistance A B C G ___________________________________ (Signature and Date) .12 Evaluate and critique a rescue and assistance drill A B C D E F G ___________________________________ (Signature and Date)

.13 Assist in developing a scenario for ruptured piping A B C G ___________________________________ (Signature and Date) .14 Evaluate and critique a ruptured piping drill IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .15 Assist in developing a scenario for structural damage IAW

NSTM 079, Vol. 2 A B C G ___________________________________ (Signature and Date) .16 Evaluate and critique a shoring drill IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .17 Assist in developing a scenario for progressive flooding IAW

NSTM 079, Vol. 2 A B C G ___________________________________ (Signature and Date) .18 Evaluate and critique a progressive flooding drill IAW

NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .19 Evaluate and critique toxic/HAZMAT IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date)

289


Questions 320.2.20 Assist in developing a scenario for a chemical attack IAW NSTM 079,

Vol. 2 A B C G ___________________________________ (Signature and Date) .21 Develop a scenario for a biological attack IAW NSTM 079, Vol. 2 A B C G ___________________________________ (Signature and Date) .22 Develop a scenario for radiological contamination IAW NSTM 079, Vol. 2 A B C G ___________________________________ (Signature and Date) .23 Evaluate and critique a CBR defense drill IAW NSTM 079, Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .24 Assist in developing a scenario for a major conflagration

IAW NSTM 079, Vol. 2 A B C G ___________________________________ (Signature and Date) .25 Evaluate and critique a major conflagration drill IAW NSTM 079,

Vol. 2 A B C D E F G ___________________________________ (Signature and Date) .26 Assist in developing integrated scenarios IAW NSTM 079, Vol. 2 A B C G ___________________________________ (Signature and Date) .27 Observe actions of the controlling stations IAW NSTM 079, Vol. 2 G ___________________________________ (Signature and Date)

290


Questions 320.2.28 Locate, identify and demonstrate the use of the following IAW SOP: a. RPM A B b. DC Book A B c. Closure Log A B ___________________________________ (Signature and Date)

COMPLETED .2 AREA COMPRISES 80% OF WATCHSTATION. 320.3 INFREQUENT TASKS – None to be discussed. 320.4 ABNORMAL CONDITIONS– None to be discussed. 320.5 EMERGENCIES


A. What indications and alarms are received? B. What immediate action is required? C. Satisfactorily perform or simulate the immediate action for this emergency.

Questions

320.5.1 Actual casualty situations during a training exercise IAW TRAC A B C ___________________________________ (Signature and Date)


291

320 DAMAGE CONTROL TRAINING TEAM (DCTT) MEMBER (CONT’D) 320.6 WATCHES 320.6.1 CONDUCT THE FOLLOWING WATCHES UNDER QUALIFIED SUPERVISION: Fire Drill (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) Flooding Drill (2 times) ___________________________________ (Signature and Date) ___________________________________ (Signature and Date) Major Conflagration Drill ___________________________________ (Signature and Date)





293

NAVEDTRA 49119-K

QUALIFICATION PROGRESS SUMMARY FOR DAMAGE CONTROL (DC)

NAME_____________________________________ RATE/RANK___________________

This qualification progress summary is used to track the progress of a trainee in the watchstations for this PQS and ensure awareness of remaining tasks. It should be kept by the individual or in the individual's training jacket and updated with an appropriate signature (Training Petty Officer, Division Officer, Senior Watch Officer, etc.) as watchstations are completed.

301 BASIC DAMAGE CONTROL (DC) COMMUNICATIONS Completed ___________________________________ Date_______________ (Signature) 302 BASIC FIRST-AID Completed ___________________________________ Date_______________ (Signature) 303 BASIC FIREFIGHTING Completed ___________________________________ Date_______________ (Signature) 304 FIRE STANDER Completed ___________________________________ Date_______________ (Signature)

294

NAVEDTRA 43119-K

QUALIFICATION PROGRESS SUMMARY FOR DAMAGE CONTROL (DC) (CONT’D)

305 BASIC CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE Completed ___________________________________ Date_______________ (Signature) 306 BASIC DAMAGE CONTROL (DC) Completed ___________________________________ Date_______________ (Signature) 307 ADVANCED DAMAGE CONTROL (DC) Completed ___________________________________ Date_______________ (Signature) 308 TEAM LEADER Completed ___________________________________ Date_______________ (Signature) 309 ADVANCED CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) DEFENSE

PERSON Completed ___________________________________ Date_______________ (Signature) 310 ADVANCED FIRST-AID/STRETCHER BEARER Completed ___________________________________ Date_______________ (Signature)

295

NAVEDTRA 43119-K


311 AQUEOUS FILM FORMING FOAM (AFFF)/TRANSFER STATION OPERATOR Completed ___________________________________ Date_______________ (Signature) 312 REPAIR PARTY INVESTIGATOR Completed ___________________________________ Date_______________ (Signature) 313 SCENE LEADER Completed ___________________________________ Date_______________ (Signature) 314 CONFLAGRATION STATION OPERATOR Completed ___________________________________ Date_______________ (Signature) 315 CRASH AND SALVAGE CREWMAN/RESCUEMAN Completed ___________________________________ Date_______________ (Signature) 316 CRASH AND SALVAGE SCENE LEADER Completed ___________________________________ Date_______________ (Signature)

296

NAVEDTRA 43119-K


317 COMPUTER BASED DAMAGE CONTROL (DC) MANAGEMENT SYSTEM AND

SOFTWARE OPERATOR Completed ___________________________________ Date_______________ (Signature) 318 REPAIR PARTY LEADER Completed ___________________________________ Date_______________ (Signature) 319 REPAIR PARTY ELECTRICIAN Completed ___________________________________ Date_______________ (Signature) 320 DAMAGE CONTROL TRAINING TEAM (DCTT) MEMBER Completed ___________________________________ Date_______________ (Signature)

297

LIST OF REFERENCES USED IN THIS PQS Allowance Equipage List (AEL) 2-880044262, Kit, Investigator EE100-BU-GYD-010, Damage Control Wirefree Communications System,

AN/SRC-53(V) MX300R Limited, AN/SRC-53A(V) MX300R Full, AN/SRC-53A(V)1 Saber R Full, AN/SRC-53(V)1 LHA-1

EE700-AD-LSS-010, User’s Logistic Support Summary (ULSS) for Multifunction Radiac (MFR) Sets, AN/PDQ-1 and AN/PDQ-2 and Ancillary Probes

Electric High Pressure Air Compressor Manufacturer Technical Manual Emergency breathing air compressor (EBAC) Manufacturer Technical Manual Emergency Water Activated Repair Patch (EWARP) Operating Procedures Engineering Operational Sequencing System (EOSS) Instruction Manual, Jaws of Life Rescue Tools, JL32b, JL27 Local Ship’s Instructions MAFO/Holtkamp Watertight Door Technical Manual Manufacturer's Technical Manual for Portable Exothermic Cutting Unit Manufacturer's Technical Manual for Portable Hydraulic Access and Rescue System (PHARS) NAVAIR 00-80R-14, NATOPS U.S. Navy Aircraft Firefighting and Rescue Manual NAVEDTRA 14057-PPR, Damage Controlman NAVEDTRA 14109, Gunner’s Mate 3 & 2 NAVEDTRA 14150, Machinist’s Mate 1 & C NAVEDTRA 14173, NEETS Module 1--Introduction to Matter, Energy, and Direct

Current NAVEDTRA 14174, NEETS Module 2--Introduction to Alternating Current and

Transformers NAVEDTRA 14175, NEETS Module 3--Introduction to Circuit Protection, Control, and

Measurement NAVEDTRA 14177, NEETS Module 5--Introduction to Generators and Motors NAVEDTRA 14232, Sound Powered Phone Talker’s Manual NAVEDTRA 14295, Hospital Corpsman NAVEDTRA 14344, Electrician's Mate NAVMED P-5041, Treatment of Chemical Agent Casualties and Conventional Military Chemical

Injuries NAVSEA 0910-LP-038-0700, Halon/HFP Fire Extinguishing Components NAVSEA 0993-LP-031-3000, CO2 Fixed Flooding NAVSEA S5090-CL-MMC-010, Pipe Jumper Hose System (PJHS) Kit No. 1 and No. 2 NAVSEA S6226-PD-MMO-010/07070, Self-Contained Breathing Apparatus Breathing Air

Charging System (SCBA BACS) NAVSEA S9169-AW-DCB-010, Damage Control Watertight Closures Inspection, Maintenance,

and Repair Booklet NAVSEA S5090-B1-TAB-010, Training Aid Booklet for Damage Control Equipment NH22505 R-E, OCENCO Technical Manual NSTM S9086-CD-STM-010/CH-070R3, Nuclear Defense at Sea and Radiological Recovery of

Ships After Nuclear Weapons Explosion NSTM S9086-CH-STM-030/CH-074V3R5, Gas Free Engineering NSTM S9086-CL-STM-010/CH-077R6, Personnel Protection Equipment

298

LIST OF REFERENCES USED IN THIS PQS (CONT’D) NSTM S9086-CN-STM-010/CH-079V1R1, Damage Control-Stability and Buoyancy NSTM S9086-KC-STM-010/CH-300R7, Electric Plant-General NSTM S9086-KE-STM-010/CH-310R3, Electric Power Generators and Conversion Equipment NSTM S9086-KY-STM-010/CH-320R6, Electrical Power Distribution Systems NSTM S9086-PA-STM-010/CH-430R2, Interior Communication Installations NSTM S9086-QH-STM-010/CH-470R4, Shipboard BW/CW Defense and Countermeasures NSTM S9086-RJ-STM-000/CH-504R5, Pressure, Temperature, and other Mechanical and

Electromechanical Measuring Instruments NSTM S9086-S3-STM-010/CH-555V1R13, Surface Ship Firefighting NSTM S9086-UF-STM-010/CH-600V1R3, Structural Closures NSTM S9086-CD-STM-000/CH-070R4, Nuclear Defense At Sea and Radiological Recovery of

Ships After Nuclear Weapons Explosion NSTM S9086-CL-STM-010/CH-077R6, Personnel Protection Equipment NSTM S9086-CN-STM-020/CH-079V2R3, Damage Control Practical Damage NSTM S9086-PA-STM-000/CH-430R1, Interior Communications Installations NSTM S9086-RQ-STM-010/CH-510R7, Heating, Ventilating, and Air Conditioning Systems for

Surface Ships NSTM S9086-RS-STM-010/CH-512R2, Fans NSTM S9086-T8-STM-010/CH-593R5, Pollution Control NTTP 3-20.31 (Rev. A), Surface Ship Survivability OPNAVINST 3120.32C, Standard Organization and Regulations Manual of the U.S. Navy

(SORM) OPNAVINST 3500.39C, Operational Risk Management OPNAVINST 5100.19E, Vol. l, Navy Occupational Safety and Health (NAVOSH) Program

Manual for Forces Afloat OPNAVINST 5100.19E, Vol. ll, Navy Occupational Safety and Health (NAVOSH) Program

Manual for Forces Afloat OPNAVINST 5100.19E, Vol. lll, Navy Occupational Safety and Health (NAVOSH) Program

Manual for Forces Afloat Power Hawk Manufacturer’s Technical Manual S6226-PD-MMO-010/07070R2, Self-Contained Breathing Apparatus (SCBA) Breathing Air

Charging System (BACS) S6290-AQ-MMC-010/09687, The Arcair Slice (PECU) Portable Exotherimic Cutting Unit S9512-CA-MMC-010/93457, Fan, Portable, Desmoking, Medium Capacity S9555-B9-MMA-010, Aqueous Film Forming Foam Equipment Scott Field Level Maintenance Manual for the Air-Pak 4.5 and 2.2 Ship’s Casualty Power Doctrine Ship’s Damage Control Book Ship’s Information Book (SIB) Ship’s Local Instruction Ship's Damage Control Diagrams Ships DC Book Part 1 Ship's Information Book (SIB) SS-100-AG-MAN-010, Damage Control and Firefighting Equipment Layout Booklet Technical Manual, Model WF-20 RAMFAN/Model RAMFAN 2000

299

PERSONNEL QUALIFICATION STANDARD Feedback Form for NAVEDTRA 43119-K

From____________________________________________________Date_______________ Via______________________________________________________Date_______________

Department Head Activity ______________________________________________________________________ Mailing Address_______________________________________________________________ Email Address ____________________________________________DSN_______________ PQS Title____________________________________________NAVEDTRA_______________ Section Affected_______________________________________________________________ Page Number(s)_______________________________________________________________

For faster response, you may email your feedback to the CNE PQS Development Group at:. Insert [email protected]. Please include the above information so that we may better serve you. Remarks/Recommendations (Use additional sheets if necessary):

mailto:[email protected]

300

(FOLD HERE)

---------------------------------------------------------------------------------------------------------------------

---------- DEPARTMENT OF THE NAVY

___________________________

OFFICIAL BUSINESS

COMMANDING OFFICER

CENTER FOR NAVAL ENGINEERING

1534 PIERSEY STREET

BLDG O26 ROOM 300

NORFOLK, VA 23511-2612

--------------------------------------------------------------------------------------------------------------------- (FOLD HERE)

damage control (dc) - dcfpnavymil.org305 basic chemical, biological, and radiological (cbr) defense...

Documents