E715Multi-metal Machining Emulsion

TRIM® E715 is a high quality, universal soluble oil whichrequires minimal maintenance in even the mostdemanding fluid management systems. It has broadapplication in machining and grinding on a wide rangeof materials. The high levels of both chemical andmechanical lubricity in this product handle the mediumto high duty machining and grinding jobs. The stableand predictable performance of TRIM E715 makes it afirst choice for high-quality, consistent partsmanufacturing.

Soluble OilsGeared up for production:

With superior mechanical lubricityand a higher oil content, TRIM®

emulsions provide a greaterboundary layer between the tooland the material. Emulsions areideal for lower, less than 600 SFPM,applications such as broaching,reaming, deep hole drilling, drilling,tapping and centerless grinding.

Emulsions work well for machiningcopper, yellow metals, steel alloys,cast aluminiums, wroughtaluminiums and tough-to-machinetitanium and nickel-based alloys.

Gear up with the TRIM emulsiondesigned to meet your productionneeds.

Gear up with the TRIM emulsiondesigned to meet your productionneeds.

Choose E715:Very stable formula provides longoperational life with consistentperformanceExtremely hard water tolerantNon-chlorinated and non-sulphurisedextreme pressure (EP) additives controlbuilt-up edge (BUE)Extremely fine soluble oil emulsionreduces carryoff for low total operatingcostFast wetting to get the fluid to the pointof cut and fully coat the work piece andchips for superior corrosion preventionSuitable for machining aluminium alloys,steel alloys, nickel alloys, cast iron andyellow metalsEasily recycled or disposed of withoutspecial handling or equipmentWill run effectively for long periodswithout the need for costly additives

E715 especially for:Applications — boring, centerlessgrinding, deep hole drilling, drilling, high-pressure, high-volume, high-speed milling,high-speed turning, milling, reaming, rollthreading, sawing, tapping, thread forming,turningMetals — cast iron, copper, exotic alloys,Inconel®, steel alloys and yellow metalsIndustries — aerospace, automotive,energy and medicalE715 is free of — chlorine, formaldehydereleasers, nitrites, phenolic compounds,sulphurised EP additives

E715Multi-metal Machining Emulsion

Application GuidelinesUse higher concentrations for lower speed metal cuttingoperations where maximum lubricity is required and lowerconcentrations for operations requiring more cooling.Running at concentrations between 7 – 10% offers the best sumplife and corrosion inhibition.For additional product application information, includingperformance optimisation, please contact your Master FluidSolutions' Authorised Distributor at https://www.2trim.us/distributors.php, your District Sales Manager,or call our Tech Line at +49 211 77 92 85 - 13.

Physical Properties Typical DataColour (Concentrate) AmberOdour (Concentrate) Mild amineForm (Concentrate) LiquidFlash Point (Concentrate) (ASTM D93-08) > 160°CpH (Concentrate as Range) 9.0 - 10.0pH (Typical Operating as Range) 8.7 - 9.7Coolant Refractometer Factor 1.0

Recommended Metalworking ConcentrationsLight duty 5.0% - 6.5%Moderate duty 6.5% - 8.5%Heavy duty 8.5% - 10.0%Design Concentration Range 5.0% - 10.0%

Concentration by % Brix

10.0

8.8

7.5

6.3

5.0

% C

once

ntra

tion

5.0 6.3 7.5 8.8 10.0

Refractive Reading (brix)

% Concentration = Refractive Reading x RefractiveFactor

Coolant Refractometer Factor % Brix = 1.0

Health and SafetyFor further information, see the mostrecent SDS which is available directly fromMaster Fluid Solutions or from your MasterFluid Solutions' Authorised Distributor.

E715Multi-metal Machining Emulsion

Mixing InstructionsRecommended usage concentration in water: 5.0% - 10.0%.To help ensure the best possible working solution, add therequired amount of concentrate to the required amount of water(never the reverse) and stir until uniformly mixed.Use premixed coolant as makeup to improve coolant performanceand reduce coolant purchases. The makeup you select shouldbalance the water evaporation rate with the coolant carryout rate.Use our Coolant Makeup Calculator to find the best ratio for yourmachine: apps.masterfluidsolutions.com/makeup/.Use mineral-free water to improve sump life and corrosioninhibition while reducing carryoff and concentrate usage.

Ordering Information20-litre pail204-litre drum1000-litre IBCTRIM® E715 | ©2009-2020 Master Fluid Solutions™ | 2020-05-27

Additional InformationUse Master STAGES™ Whamex™ for aquick and thorough precleaning of yourmachine tool and coolant system.Consult Master Fluid Solutions beforeusing on any metals or applications notspecifically recommended.This product should not be mixed withother metalworking fluids ormetalworking fluid additives, except asrecommended by Master Fluid Solutions,as this may reduce overall performance,result in adverse health effects, ordamage the machine tool and parts. Ifcontamination occurs, please contactMaster Fluid Solutions for recommendedaction.TRIM® is a registered trademark ofMaster Chemical Corporation d/b/aMaster Fluid Solutions.Master STAGES™ and Whamex™ aretrademarks of Master ChemicalCorporation d/b/a Master Fluid Solutions.The information herein is given in goodfaith and believed current as of the dateof publication and should apply to thecurrent formula version. Becauseconditions of use are beyond our control,no guarantee, representation, orwarranty expressed or implied is made.Consult Master Fluid Solutions for furtherinformation. For the most recent versionof this document, please go to this URL:

https://2trim.us/di/?plr=E715*en*eu

Hasselsstraße 6-14Düsseldorf, 40597Germany+49 211 77 92 85 - 0

info-eu@masterfluidsolutions.com

masterfluidsolutions.com/eu/en/

Powered by TCPDF (www.tcpdf.org)