data sheet grips & attachments · data sheet mark-10 corporation [email protected] toll-free:...

Data Sheet

Mark-10 Corporation � www.mark-10.com � [email protected]: 888-MARK-TEN � Tel: 631-842-9200 � Fax: 631-842-9201 Specifications subject to change without prior notice

Wire terminal gripWire terminal grips s

DuaDual roller gripl roller grip

Film and paper gripsFilm and paper grips

For testing wire terminals, cables, connectors, and other samples for pull testing.

Model No.

CapacitylbF [N]

Weightlb [kg] ØA B C D

G1001

200 [1000]

0.29 [0.13]

1.00 [25.4]

3.40 [86.4]

0 - 0.125 [0 - 3.1]

1.45 [36.8]

G1001-10.125 - 0.25 [3.1 - 6.3]

G1001-20.25 - 0.375[6.3 - 9.5]

For securing the ends of wire, cable, and tubing samples for pull testing. Engaging and disengaging samples is quick and easy with a an efficient cam design and convenient side slot for sample insertion. Steel rollers are serrated for good grip.

For gripping film, paper, labels, packaging, and other thin materials for tensile and peel testing. Ad-justable serrated interlocking jaws grip the sample securely.

Model No.

CapacitylbF [N]

Weightlb [kg]

G1002 200 [1000] 0.19 [0.09]

A B C D E F G

1.18 [30.0]

2.00 [50.8]

0.75 [19.1]

0 - 0.25 [0 - 6.3]

0.25 [6.4]0.64

[16.3]1.0 [25.4]

G1008

G1015-X

G1008

G1015-X

� All dimensions presented as IN [MM]

of 8

Grips & Attachments 32-1060 REV 5

Model No.

CapacitylbF [N]

Weightlb [kg] A B C D

G1008

100 [500]

0.31 [0.14]

1.00 [25.4]

2.50 [63.5]

1.60 [40.6]

0 - 0.15 [0 - 3.8]

G1015-10.57

[0.26]3.00

[76.2]

3.00 [76.2]

1.90 [48.3]

0 - 0.50 [0 - 12.7]

G1015-20.67

[0.30]5.00

[127.0]

G1015-30.77

[0.35]7.00

[177.8]

Data Sheet


Pneumatic fi lm and paper gripPneumatic fi lm and paper grip

Fully enclosed, air-powered grip for seal strength testing of packaging, elongation testing of various ma-terials, and other tensile testing requirements. Serrated interlocking jaws effectively grip samples for up to 100 lbF of force. The grip features a unique integrated open/close valve for quick sample engagement and disengagement. An air connection kit, consisting of tubing and fittings needed to connect two grips, is available separately.

Model No.

CapacitylbF [N]

Weightlb [kg]

Max. pressurePSI (MPa)

Air input thread A

G1046100 [500] at 100 PSI [0.86 MPa]

0.58 [0.26]

125 [0.86] #10-32 UNF0 - 0.13 [0 - 3.3]

A. Coiled tubing, 1/8” OD, 1/16” ID, 8” retracted length (qty. 2)B. Y-splitter (qty. 1)C. Straight tubing, 1/8” OD, 1/16” ID, 5’ length (qty. 1)D. Elbow fitting, tubing to #10-32M (qty. 1)E. Straight fitting, tubing to #10-32M (qty. 1)F. Thread adapter, #10-32F to 1/4” NPT M (qty. 1)G. Adhesive-backed guide (qty. 4)

The optional air connection kit consists of the fol-lowing:

AC

B

D

E F GModel No. Description

AC1019 Air connection kit for G1046

of 8


9900° Peel FixturePeel Fixture

For the testing of adhesives, films, and various types of packaging. Maintains a 90° angle between the table and direction of pull. Optional limit switch stops motorized travel, preventing cable breakage.

Model No. Description

G1045 90° peel fixture

G1045-1 Limit switch for G1045

� G1045-1 optional limit switch

Data Sheet


Wedge gripsWedge grips A heavy-duty grip designed for a range of tensile testing requirements up to 1200 lb [5.3 kN]. Self-tighten-ing serrated jaws engage the sample through a spring loaded knob and rack and pinion type mechanism. The jaws ride on rollers, eliminating jamming common in conventional wedge grips.

A B C D E F G

1.95 [49.5]

2.45 [62.2]

0.75 [19.1]

1.50 [38.1]

5/16-18 UNC

0 - 0.25 [0 - 6.4]

1.00 [25.4]

of 8


PPadded attachmentsadded attachmentsFor applications in physical ther-apy and ergonomics, including muscle strength testing, job task requirements, and more.

Model No. CapacitylbF [kN]

Weightlb [kg]

G1019 500 [2.5] 0.03 [0.01]

G1020 500 [2.5] 0.13 [0.06]

G1021 500 [2.5] 0.25 [0.11]

G1019 G1021G1020

G1019 G1021G1020

� Supplied with a 5/16-18M to #10-32F adapter

Parallel jaw gripParallel jaw grip For general pull testing applications. Manually tightened serrated jaws may be individually adjusted.

Model No.

CapacitylbF [N]

Weightlb [kg] A B C D

G1013 200 [1000]0.65

[0.29]1.75

[44.5]2.25

[57.2]1.25

[31.8]0 - 0.25 [0 - 6.3]

� Supplied with a 5/16-18M to #10-32F adapter

Model No. Capacity lbF [kN]

Weightlb [kg]

Jaw Material

Jaw Hardness

G1061 1200 lbF [5.3kN] 0.80 [0.36] 416 SS 43 RC

Data Sheet


of 8


Miniature component gripMiniature component gripFor testing small and hard-to-reach electronic and mechanical components. Slender profile allows this grip to be used in a wide range of applications.

Model No.

CapacitylbF [N]

Weightlb [kg] A B C D E

G100330

[150]0.05

[0.02]0.5

[12.7]1.7

[43.2]0.5

[12.7]0 - 0.07 [0 - 1.8]

0.15 [3.8]

Rubber tipRubber tipSimulates a finger for testing pushbuttons, membrane switches, touch-screen panels, keyboards, etc.

Model No. CapacitylbF [N]

Weightlb [kg]

G1011 50 [250] 0.01 [0.004]

Multi-jaw gripMulti-jaw gripFor gripping round or odd shaped items.

Model No.

Cap.lbF [N]

Weightlb [kg] ØA B C ØD E ØF

G1056100

[500]0.30

[0.14]3.50

[88.9]

2.30 [58.4] MAX

1.63 [41.4]

1.55 [39.4]

0.075 [1.91]

0.40 - 1.25 [10.2 - 31.7]

Compression platesCompression platesFor compressing springs, foams, cartons, aerosol cans, and many other products.


Weightlb [kg] ØA Thread

G1009 200 [1000] 0.08 [0.04] 2.0 [51.0] #10-32F

G1009-1 500 [2500] 0.27 [0.12] 3.0 [76.2] 5/16-18F

Data Sheet


of 8


Universal bottle gripUniversal bottle grip

For gripping bottles and containers for closure torque testing. Eight rubber edged gripping arms secure a wide range of sample shapes and sizes and can be individually positioned at angles of up to 180°. Mounts directly to Series TST torque test stands or force test stands (for such applications as top load testing).

Model No. CapacitylbFin [Nm]

Weightlb [kg] ØA

G1023 100 [11.3] 1.50 [0.7] 4.80 [122.0] MAX

Universal V-Jaw gripUniversal V-Jaw grip

For gripping round objects. Serrated, reversible aluminum jaws effectively grip a wide range of sample shapes and sizes. Mounts directly to Se-ries STH and STJ torque sensors, and Mark-10 force test stands.

Model No. CapacitylbFin [Nm]

Weightlb [kg]

G1053 100 [11.3] 0.39 [0.18]

Chuck gripsChuck grips

For securing round samples, fixtures, or bits. Al-though both models may be used in force and torque applications, the G1010 is typically used in force measurement applications, while the G1022 is typically mounted to Series TST torque test stands for torque measurement applications.

Model No. Capacity Weight

lb [kg] ØA ØB ØC

G101030 lbF

[150 N]0.35

[0.16]0.062 - 0.375

[1.6 - 9.5]N/A N/A

G1022-1

100 lbFin [11.3 Nm]

0.50 [0.23]

N/A 0.188 [4.7]

0.028 - 0.250 [0.7 - 6.3]

G1022-20.062 - 0.375

[1.6 - 9.5]

G1022-30.078 - 0.500

[2 - 12.7]

G1010

G1022-X

G1022-X

G1010

A B C ØD1* ØD2*

3.1 [78.7] 2.0 [50.8] 1.6 [40.6]1.10 - 1.55

[27.9 - 39.4]0.65 - 1.10

[16.5 - 27.9] * Jaws must be reversed to switch from ØD1 to ØD2

Data Sheet


Series STH attachments Series STH attachments

Jacobs chucks and bit holder mount to the STH to secure a fixture, bit, or sample during torque testing.

Model No.

CapacitylbFin [Nm]

Weightlb [kg] A ØB ØC

G1016-1

100 [11.3]

0.26 [0.12] 2.90 [73.7]

0.188 [4.7]

0.028 - 0.250 [0.7 - 6.3]

G1016-2 0.36 [0.16] 3.16 [80.3]0.062 - 0.375

[1.6 - 9.5]

G1016-3 0.67 [0.30] 3.73 [94.7]0.078 - 0.500

[2 - 12.7]

G1017 0.11 [0.05] 2.33 [59.2] 1/4” hex

G1016-X

G1017

G1016-X

G1017

Swivel adaptersSwivel adapters

Extension rodsExtension rods

For use between any grip and force gauge to provide a swiveling action for proper sample alignment.

For use between a force gauge and another attachment, such as a hook or compression plate.


Weightlb [kg] A B

G1018-1 200 [1000] 0.12 [0.05] #10-32M #10-32F

G1018-2 500 [2500] 0.27 [0.12] 5/16-18M 5/16-18F

Model No.

CapacitylbF [N]

Weightlb [kg] A ØB C D

G1024200

[1000]

0.01 [0.005] 5.0 [127.0]0.25 [6.4]

#10-32F #10-32MG1024-1 0.02 [0.009] 2.0 [50.8]

G1024-2 0.05 [0.023] 1.0 [25.4]

G1031500

[2500]

0.05 [0.023] 5.0 [127.0]0.50

[12.7]5/16-18F 5/16-18MG1031-1 0.10 [0.045] 2.0 [50.8]

G1031-2 0.25 [0.113] 1.0 [25.4]

of 8


Data Sheet


Cone pointsCone points

V-groovesV-grooves

For various compression tests.

For compression testing of round or odd-shaped samples.

Chisel pointsChisel points

For compressing or puncturing a variety of samples.

Model No.

CapacitylbF [N]

Weightlb [kg] A ØB C

G1025 200 [1000] 0.003 [0.001] 0.50 [12.7] 0.25 [6.4] #10-32F

G1032 500 [2500] 0.040 [0.018] 1.00 [25.4] 0.50 [12.7] 5/16-18F

Model No.

CapacitylbF [N]

Weightlb [kg] A ØB C D

G1027 200 [1000]0.004

[0.002]0.50

[12.7]0.25 [6.4]

#10-32F0.08 [2.0]

G1034 500 [2500]0.040

[0.018]1.00

[25.4]0.50

[12.7]5/16-18F

0.25 [6.4]

Model No.

CapacitylbF [N]

Weightlb [kg] A ØB C

G1026 200 [1000] 0.003 [0.001] 0.50 [12.7] 0.25 [6.4] #10-32F

G1033 500 [2500] 0.030 [0.014] 1.00 [25.4] 0.50 [12.7] 5/16-18F

of 8


Data Sheet


HooksHooks

Thread adapters & couplings Thread adapters & couplings

For tensile testing of various samples.

For use between force gauge shafts, grips, and/or attachments.

Model No.

CapacitylbF [N] Weight RA B ØC D

G102820

[100]0.010

[0.005]0.05 [1.3]

1.00 [25.4]

0.10 [2.5] #10-32F

G1038200

[1000]0.020

[0.009]0.20 [5.1]

1.50 [38.1]

0.19 [4.8] #10-32M

G1035500

[2500]0.050

[0.023]0.30 [7.6]

1.90 [48.3]

0.28 [7.1] 5/16-18M

G10421000

[4500]0.320

[0.145]0.5 [12.7]

4.10 [104.1]

0.45 [11.4]

1/2-20M

Model No. CapacitylbF [N] A B C

G1050100 [500]

0.75 [19.1] #4-40M #10-32F

G1051 0.60 [15.2] #4-40M #10-32M

G1039

200 [1000]

0.75 [19.1] #10-32F #10-32F

G1030 0.50 [12.7] 5/16-18M #10-32F

G1057 0.75 [19.1] #10-32F M6F

G1060 0.75 [19.1] #10-32M #10-32M

G1047 0.75 [19.1] #10-32M M4F

G1048 0.75 [19.1] M4M #10-32F

G1054 0.75 [19.1] M6M #10-32F

G1040

500 [2500]

1.00 [25.4] 5/16-18M 5/16-18M

G1037 1.00 [25.4] 5/16-18F 5/16-18F

G1049 1.25 [31.8] M6M 5/16-18F

G1059 1.00 [25.4] 5/16-18F 1/2-20F

G1041 1000 [5000] 1.00 [25.4] 1/2-20M 5/16-18M

Flat headsFlat heads

For compression testing of buttons, membrane switches, etc.

M/M

F/F

M/F

G1042G1035

G1038G1028

Model No.

CapacitylbF [N]

Weightlb [kg] ØA B C

G1029 200 [1000] 0.01 [0.005] 0.5 [12.7] 0.5 [12.7] #10-32F

G1036 500 [2500] 0.06 [0.027] 0.75 [19.1] 0.87 [22.1] 5/16-18F

G1028G1038

G1035G1042

M/M F/F M/F

of 8


data sheet grips & attachments · data sheet mark-10 corporation [email protected] toll-free:...

Documents