data sheets - paints and coatings
Post on 03-Jan-2016
4.062 views
DESCRIPTION
Data Sheets - Paints and CoatingsTRANSCRIPT
Previous Issue: 10 December 2006 Next Planned Update: 10 December 2011 Revised paragraphs are indicated in the right margin Page 1 of 398 Primary contact: Suller, Abe A. on 966-3-8760223
Copyright©Saudi Aramco 2006. All rights reserved.
Engineering Standard
SAES-H-101V 19 April 2009 Approved Saudi Aramco Data Sheets - Paints and Coatings Paints and Coatings Standards Committee Members Barouky, Fikry Fouad, Chairman Hammad, Bakr Sulaiman, Vice Chairman Homayed, Mohammed Ali Khashram, Maher Saud Mansour, Mana Hamad Nujaim, Salah Ahmed Seba, Zaki Ahmed Suller, Abraham A
Saudi Aramco DeskTop Standards Table of Contents 1 Arabian Danish – Approved Materials........... 2 2 Belzona – Approved Materials........... 5 3 Ciba Geigy Ltd. – Approved Materials........... 5 4 Corrocoat – Approved Products................... 10 5 Fosam – Approved Products........................ 13 6 Hempel – Approved Materials...................... 16 7 International – Approved Products............... 84 8 Jotun – Approved Materials....................... 140 9 Oasis Ameron – Approved Materials......... 188 10 Sipco – Approved Products........................ 231 11 Shell Chemicals – Approved Products....... 296 12 Sigma – Approved Products...................... 300 Attachment – Drying Time Graphs................... 359
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 2 of 398
1 Arabian Danish – Approved Materials
APCS-10 Koppers Super Service Bituminous: Black
Black 30255
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 3 of 398
Manufacturer : Hempel Paints (Saudi Manufacturer - Approved Saudi Aramco Data Sheet
APCS-10
Type of Coating : Bituminuous
Manufacturer : Arabian Danish Paints Co. Ltd.
Product Name : Koppers Super Service Black 30255
SAMS S/N : 09-611-715/720/725
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Xylene (for cleaning only)
SAMS S/N : -
2.4 Thinning Requirements : None
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 500 micrometers
3.3 Typical Dry Film Thickness Per Coat : 350 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 27 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 4 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-10 - Koppers Super Service Black 30255 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 10 Hours - None 16 Days
30°C 6 Hours - None 14 Days
50°C 5 Hours - None 10 Days
3.7 Recommended Equipment
Airless Spray
Brush
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 68%
4.2 Product Weight (ASTM D1475) : 1.45 Kg/L
4.3 Viscosity (ASTM D562) : 65 KU
4.4 Flash Point (ASTM D93 OR D56) : 28°C
Approval Date: July 15, 1986
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 5 of 398
1 Belzona – Approved Materials
APCS-27 Belzona 1591
APCS-28 Belzona 1341
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 6 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-27
Type of Coating : Epoxy-Phenol Novolac Coating
Manufacturer : Belzona Polymerics Ltd.
Product Name : Belzona 1591 (formerly Ceramic XHT)
SAMS S/N : 1000767601
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 3 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 10.5:1 by volume
2.3 Thinner : N//A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : None
2.6 Pot Life : 25 min. @ 30ºC
3. Application
3.1 Maximum Allowable Substrate Temperature : 50ºC
3.2 Typical Wet Film Thickness Per Coat : 650 - 850 micrometers
3.3 Typical Dry Film Thickness Per Coat : 650 - 850 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 7 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-27 - Belzona 1591 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 110 Min Hours Hours
30°C 25 Min Hours Hours
50°C 6 Min Min Hours
3.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : N/A
Brush/Spatula Suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.97 to 2.06 Kg/L
4.3 Viscosity (ASTM D562) : KU – Liquid Putty
4.4 Flash Point (ASTM D93 or D56) : > 110°C
Approval Date: November 29, 2008
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 8 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-28
Type of Coating : Epoxy-phenol novolac coating
Manufacturer : Belzona Polymerics Ltd.
Product Name : Belzona 1341 (Supermetalglide)
SAP M/N (SAMS S/N) : 1000180328, 1000180337 and 1000180390
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 3 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1:1 by volume
2.3 Thinner : None
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : None
2.6 Pot Life : 20 min. @ 30ºC
3. Application
3.1 Maximum Allowable Substrate Temperature : 50ºC
3.2 Typical Wet Film Thickness Per Coat : 250 - 300 micrometers
3.3 Typical Dry Film Thickness Per Coat : 250 – 300 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 9 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-28 - Belzona 1341 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1.5 Hours 24 Hours 24 Hours
30°C 30 Min 6.0 Hours 24 Hours
50°C 10 Min 1.5 Hours 24 Hours
3.7 Recommended Equipment
Airless Spray : Tip size 0.019 to 0.029 inch
Fluid pressure 4,500 psi
Conventional Spray : N/A
Brush/Spatula : Suitable/Spatula
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100 %
4.2 Product Weight (ASTM D1475) : 1.39 Kg/L
4.3 Viscosity (ASTM D562) : 2,000 cps
4.4 Flash Point (ASTM D93 or D56) : > 110°C Close cup
Note: When applying over eroded-corroded surfaces, pits, crevices & rough welds, use Belzona 1111,
1131 or 1311 first to level surfaces before coating application.
Approval Date: November 30, 2008
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 10 of 398
2 Ciba Geigy Ltd. – Approved Materials
APCS-20A Araldite GY 257 Fiberglass Reinforced Epoxy: Hand Applied
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 11 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A
Type of Coating : Fiberglass Reinforced Epoxy; Hand-Applied
Manufacturer : Ciba-Specialty Chemicals, Switzerland
Product Name : Araldite GY 257 (Curing Agents HY 830 and HY 850)
SAMS S/N : None
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 3
2.2 Mixing Ratio : 100:52:8; GY 257:HY
830:HY 850 (by weight)
2.3 Thinner : N/A (clean up only)
SAMS S/N : None
2.4 Thinning Requirements : Nil
2.5 Induction Time : Not Applicable
2.6 Pot Life (GY 257 + HY 830 + HY 850);: : 3 hrs. 45 mins. @ 20°C
Measured with TECAM gel timer @ 65% relative
humidity. (1 kg. mixture)
3. Installation Procedure
3.1 Surface Preparation
3.1.1 The surface is degreased and cleaned to ensure the removal of all oil, grease,
salts, dirt, and other surface contaminants prior to further surface preparation.
3.1.2 Prior to the start of the blasting work, all the surface irregularities including
weld spatters, weld fluxes, rough capping, etc., shall be removed or smoothed
using mechanical tools. The surface is blasted to SA 2 ½ (near white metal).
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 12 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A - Ciba's Araldite GY 257 (Cont'd)
3.1.3 Blasted surfaces shall be vacuumed or blown clean, and extra care should be
taken to avoid contamination of the blast cleaned surface. Severe corrosion,
undercuts, or weld porosity (larger than 1 inch in diameter) should be reported
for remedial work.
3.1.4 Priming shall take place while surface preparation is still fresh (directly after
blasting and before oxidation). The overall steel surfaces such as the shell wall,
support column, tank floor, and bottom shall be primed with a solvent based
epoxy to a dry film thickness (DFT) of 25-30 microns (~1 mil).
3.2 Caulking
Caulking shall be applied on all sharp edges, mainly between shell and floor, between
floor plates, in and around sumps, around connection between pipes and hull, and
around support pipes.
3.2.1 For the area between the shell and the floor, the amount of filler will determine
the sharpness of the turn. The sharper the turn, the more difficult it becomes to
construct a laminate that is free from wrinkles and air bubbles, and therefore
must be avoided. Use minimal epoxy filler as necessary to make the turn. A
throat of approximately 5 cm is usually adequate.
3.2.2 Caulking between the floor plates shall be applied directly before lamination,
and while the epoxy mortar is still wet, lamination on the floor can proceed.
3.3 Landing Plates
In floating roof tanks, steel panel may be inserted under the support legs. Landing
plates (~6 mm thick) are first blast cleaned and primed on both sides, and the
lamination system is applied to one side only. While still wet, sand (clean and dry) is
sprinkled on the perimeter to provide for subsequent mechanical bond. While blast
cleaning is in progress, work shall start on the landing legs in the following manner:
3.3.1 The welds on the striker plate are caulked.
3.3.2 Two to three hydraulic jacks are placed around the leg on timber spreaders,
clear of the area to be lined, and the roof is lifted about 15mm. The pin holding
the leg is removed, and the leg is raised.
3.3.3 The area under the leg is cleaned.
3.3.4 The lining is applied so it extends 10 cm from the landing plate. The lining
should be resin rich in the center.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 13 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A - Ciba's Araldite GY 257 (Cont'd)
3.3.5 The prepared plate is placed, laminate side up, and forced slightly in the wet
laminate. The system is allowed to set, the leg is lowered, the pin replaced and
the jacks are released.
3.3.6 Any gaps between the landing plate and the striker plate should be filled with
epoxy mortar (caulking).
3.4 Laminate Application
3.4.1 Apply a generous amount of epoxy mix (~500 microns) onto the primed steel
surface, as evenly as possible.
3.4.2 Apply one layer of 450 g/m² fiberglass chopped strand mat (CSM) to the wet
epoxy mix.
3.4.3 Embed fully to remove wrinkles and roll with steel roller to remove trapped air.
Add resin where required and consolidate well with steel roller.
3.4.4 Apply a second generous coating of Epoxy mix.
3.4.5 Apply the second layer of 450 g/m² fiberglass CSM with a 50% of the nominal
width of the mat overlap on the previous layer in order to achieve a 2 layer
system. Care should be taken to ensure the second layer is overlapping the
previous one with the untrimmed edge.
3.4.6 Repeat smoothing and rolling as in step 3.4.3 and add resin mix if required.
3.4.7 Lay a surfacing tissue of 30 g/m² in such a manner that it overlaps the mat
without aligning with mat edge, and ensuring that the strands of mat are not
exposed or protruding @ the laminate surface.
3.4.8 Repeat smoothing and rolling as in step 3.4.3.
3.4.9 Apply a fourth coat of Epoxy mix/ gel coat to give a resin rich finish.
3.5 Repair of Defects
3.5.1 Air inclusion shall be cut out to a tapered edge, sanded around, and application
of mat and tissue carried out with an overlap of 50mm on the sound laminate.
If the overcoating interval was exceeded, the overlap shall be of 100mm.
3.5.2 Overlaps of less than 30mm shall be patched with a strip 100mm wide.
3.5.3 Areas where the laminate does not appear to be resin rich shall be patched with
an extra layer of surface tissue and resin.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 14 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A - Ciba's Araldite GY 257 (Cont'd)
3.6 Maximum Allowable Substrate Temperature : 55°C
3.7 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum Full Cure
20°C 30 Hours 20 Hours 40 Hours 30 Hours
40°C 10 Hours 7 Hours 15 Hours 11 Hours
50°C 3 Hours 3 Hours 7 Hours 5 Hours
In case overcoating interval is past the maximum limit, abrade the cured film with sand
paper or sweep blast prior to application of fresh coat.
3.8 Recommended Equipment
Hand application only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.12 Kg/L
4.3 Viscosity (@25°C) (ASTM D562) : 1,400 m Pa S
4.4 Flash Point (ASTM D93 or D56) : 138°C (GY 257)
183°C (HY 830)
163°C (HY 850)
Related Materials:
1. Fiberglass Mat: Vetrotex® M4 40 P3 (Emulsion bonded) by Vetrotex International,
Scandinavian Glass fiber (MK 12) by Owens Corning or equivalent
2. Surfacing Tissue: Fiberil® T 1773; 30-40 g/m²; Manufactured by Carl Freudenberg
3. Primer: Hempel's Hempadur 1559 or approved equivalent.
4. Caulking (either):
4.1 100 parts resin mix and 20 parts Aerosil 202, Cabosil or equivalent
4.2 Hempadur Caulking 3588
Approval Date: August 9, 1997
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 15 of 398
3 Corrocoat – Approved Products
APCS-2G Polyglass VEF Vinyl Ester Coating
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 16 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2G
Type of Coating : Vinyl Ester Coating: One-coat
Manufacturer : Corrocoat Ltd.
Product Name : Polyglass VEF
SAP M/N (SAMS S/N) : Base plus catalyst in one box 1000709300 (09-000-502);
Retarder 1000709303 (09-000-505)
1. Storage
1.1 Shelf life, sheltered storage @ 27°C maximum : 6 months
2. Mixing
2.1 No. of Components : Three
2.2 Mixing Ratio : (contact OTC)
2.3 Cleaning Agent : Styrene Monomer Inhibited
SAP M/N (SAMS S/N) : 1000709301 (09-000-503-00)
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life : ¾ hr at 25 °C
½ hr 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 800 micrometers
3.3 Typical Dry Film Thickness Per Coat : 750 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 39.6 M²/L
3.5 Minimum Number of Coats (Spray Application) : One
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 17 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2G
Polyglass VEF
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water
10°C 4 Hours 3 Hours 3 Days 6 Days
30°C 1 Hour 1 Hour 2 ½ Days 3 Days
50°C 1 Hour 1 Hours 2 Days 1 Day
3.7 Recommended Equipment
Airless Spray: Pump Ratio: 45:1 minimum
Tip Size: 0.030 to o.045 inch
Fluid Pressure: 3,000 psi
Paint Hose: 3/8 inch
Conventional Spray: Not recommended
Brush:
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 99%
4.2 Product Weight (ASTM D1475) : 1.16 to 1.19 Kg/L
4.3 Viscosity (ASTM D562) : 250 to 350 Poise
4.4 Flash Point (ASTM D93 or D56) : 28°C
Notes:
1. For tool cleaning, use Styrene Monomer Inhibited available in SAP M/N (SAMS S/N) 1000709301
(09-000-503-00).
2. The main component of the coating mixture is the base and catalyst. If retarder is required to delay
curing in summer, contact the manufacturer on tel 812-1044 for instruction.
Approval Date: October 22, 2005
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 18 of 398
3 Fosam – Approved Products
APCS-10 Nitoproof 120 Bituminous Coating
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 19 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-10
Type of Coating : Bituminous Coating: Self-Priming
Manufacturer : Fosam Co.
Product Name : Nitoproof 120
SAP M/N (SAMS S/N) : 1000194025 (09-611-715), 1000194029 (09-611-720) or 1000194032
(09-611-725)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1-½ years
2. Mixing
2.1 No. of Components : One
2.2 Mixing Ratio : N/A
2.3 Thinner : Fosroc Solvent 103
SAMS S/N : None
2.4 Thinning Requirements : Nil
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : °C
3.2 Typical Wet Film Thickness Per Coat : 500 micrometers
3.3 Typical Dry Film Thickness Per Coat : 325 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 13 M²/L
3.5 Minimum Number of Coats (Spray Application): Three for buried.
Four for immersion.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 20 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-10
Nitoproof 120
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried
10°C 8 to 16 Hours 12 Hours None 7 Days
30°C 2 to 4 Hours 4 Hours None 7 Days
50°C 30 Minutes 2 Hours None 4 Days
3.7 Recommended Equipment
Airless Spray: Tip Size: 0.026 inch
Fluid Pressure: 2,030 psi
Conventional Spray: Not recommended
Brush:
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 65%
4.2 Product Weight (ASTM D1475) : 1.17 Kg/L
4.3 Viscosity (ASTM D562) : KU
4.4 Flash Point (ASTM D93 or D56) : 37°C
Approval Date: February 4, 1999
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 21 of 398
4 Hempel – Approved Materials
APCS-1A Galvosil 85710 or 15780 Inorganic Zinc Primer: Solvent-Based
Galvosil 15610 Inorganic Zinc Primer: Water-Based
Hempadur Mastic 45881 Epoxy Topcoat: Red/Gray/Yellow
APCS-1B Hempadur HB Primer 17300 Epoxy Primer: Yellow
Hempadur 15570 Epoxy Primer: Red or Green
Hempadur Mastic 45881 Epoxy Topcoat: Red/Gray/Yellow
APCS-1C Hempadur Zinc 17360 Zinc-Rich Epoxy Primer: Gray
Hempadur Mastic 45881 Epoxy Topcoat: Red/Gray/Yellow
APCS-1D (Use APCS-1A as primer and intermediate coat.
Hempathane Topcoat 55210 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1E (Use APCS-1B as primer and intermediate coat.
Hempathane Topcoat 55210 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1F (Use APCS-1C as primer and intermediate coat.
Hempathane Topcoat 55210 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-2A/B/C Hempadur 85671 Epoxy: Off White/ Red / Green
APCS-2D Hempadur 85210 Primer: Yellow FS 595a 23594
Topcoat: White FS 595a 27780
APCS-3 Hempel’s Coal Tar Epoxy Mastic 35670 Coal Tar Epoxy: Reddish Brown/Black
APCS-4 Hempel's ZP Alkyd Primer 12090 Zinc Phosphate Alkyd: Red
Hempel’s Silvium 51570 Aluminum Topcoat
APCS-6 Hempel's ZP Alkyd Primer 12090 Zinc Phosphate Alkyd: Red
Hempalin 52140 Alkyd Topcoat: Various Colors
APCS-9 Hempatex 46330 Chlorinated Rubber Primer: Red
Hempatex 46330 Chlorinated Rubber Topcoat: Gray/Green/Brown/Blue
APCS-10 Hempinol HB 10270 Bituminous: Black
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 22 of 398
Hempels - Approved Materials (Cont'd)
APCS-11A Hempel's Galvosil 85710 or 15780 Inorganic Zinc Primer: Solvent-Based
Hempel's Galvosil 15610 Inorganic Zinc Primer: Water-Based
Hempel’s Silicone Aluminum 56910 Heat Resistant Topcoat: Aluminum
or Hempel’s Silicone Acrylic 56940
APCS-11B Hempel's Silicone Aluminium 56910 Heat Resistant Self-Priming System:
Aluminum
APCS-12 Hempadur HB Primer 17300 Epoxy Primer: Yellow
Hempadur 15570 Epoxy Primer: Red or Green
Hempadur Hi-Build 45881 Epoxy Topcoat: Red/Gray/Yellow
APCS-17A Hempel's Galvosil 85710 or 15780 Inorganic Zinc Primer: Solvent-Based
APCS-17B Hempel's Galvosil 15610 Inorganic Zinc Primer: Water-Based
APCS-19A Hempadur Multi-Mil 85490 Splash Zone Compound: Hand-Applied
APCS-19B Hempadur Spray-Guard 85550 Splash Zone Compound: Spray-Applied
APCS-20A Hempel’s Epoxy Resin System 05500 Fiberglass Reinforced Epoxy: Hand Lay-Up
APCS-20B Hempel's Sprayfibre 35890 Fiberglass Reinforced Epoxy: Hand Spray-
Applied
APCS-22A Hempadur 45070 Epoxy: Gray/Yellow/Black
APCS-23 Hempinol HB 10270 High Temperature Mastic: Black
APCS-26 Hempadur Mastic 45881 Epoxy Mastic: Aluminum/White/Orange/Red/
Yellow/Gray/Black
APCS-26T (Use APCS-26 as primer and Hempathane in APCS-1D as topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 23 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Inorganic Zinc Primer; Solvent-Based
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Galvosil 85710
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 6 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 8.1 kg liquid: 20.5 kg Zinc dust
2.3 Thinner : Hempel's 08700
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 30%
2.5 Induction Time : Nil
2.6 Pot Life : 6 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 91 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 28.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 24 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Hempel's Galvosil 85710 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 4 Hours 7 days None
30°C 1 Hour 2 days None
50°C ¼ Hour 10 Hours None
* Before overcoating after exposure in a contaminated environment, clean thoroughly
by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.019 to 0.023 inch
Fluid pressure 1,450 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 70 to 74%
4.2 Product Weight (ASTM D1475) : 2.89 to 2.91 Kg/L
4.3 Viscosity (ASTM D562) : 92 tro 98 KU
4.4 Flash Point (ASTM D93 or D56) : 18°C
Note: Topcoating is done when the inorganic zinc primer is fully cured. The minimum overcoating
time is valid @ 75% relative humidity and sufficient ventilation.
Approval Date: March 25, 2002
Replaces : July 7, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 25 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Inorganic Zinc Primer; Water-Based
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Galvosil 15610
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 12 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 8.1 kg liquid:23.3 kg Zinc Dust
2.3 Thinner : Fresh water (sweet water)
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : Up to 50%
2.5 Induction Time : Nil
2.6 Pot Life : 3-¾ hours @ 25°C
1-¼ hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 95 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 27.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 26 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Hempel's Galvosil 15610 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 4 Hours 30 days None
30°C 1 Hour 7 days None
50°C ¼ Hour 2 Days None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : Tip Size: 0.070 to 0.085 inch
Atomizing Pressure: 20 to 35 psi
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 66 to 70%
4.2 Product Weight (ASTM D1475) : 3.07 to 3.13 Kg/L
4.3 Viscosity (ASTM D562) : 67 to 73 KU
4.4 Flash Point (ASTM D93 or D56) : N/A
Note: Topcoating is done when the inorganic zinc primer is fully cured. The minimum overcoating
time is valid @ 75% relative humidity and sufficient ventilation.
Approval Date: December 22, 2004
Replaces : March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 27 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Inorganic Zinc Primer; Solvent-Based
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Galvosil 15780
SAP M/N (SAMS S/N) : 1000194146; 09-611-958
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 6 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 10 L liquid: 17 kg Zinc Dust
2.3 Thinner : Hempel's 08700
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 50%
2.5 Induction Time : Nil
2.6 Pot Life : 9 hours @ 25°C
3 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 100 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 28 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Hempel's Galvosil 15780 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 4 Hours 4 days None
30°C 1 Hour 1 day None
50°C ¼ Hour 6 Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure sweet water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.019 to 0.023 inch
Fluid pressure: 1,500 psi
Conventional Spray : Tip Size: 0.070 to 0.085 inch
Atomizing Pressure: 20 to 35 psi
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 2.37 to 2.43 Kg/L
4.3 Viscosity (ASTM D562) : 67 to 73 KU
4.4 Flash Point (ASTM D93 or D56) : 14°C (57°F)
Note: Topcoating is done when the inorganic zinc primer is fully cured. The minimum overcoating
time is valid @ 75% relative humidity and sufficient ventilation.
Approval Date: December 18, 2004
Replaces : July 7, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 29 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Epoxy Topcoat: Polyamide Cured
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur Mastic 45881
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960
(09-612-375)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 3:1 by volume
2.3 Thinner : Hempel's 08450
SAP M/N (SAMS S/N) : 1000198572 (09-738-260)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : Nil
2.6 Pot Life : 2-¼ hours @ 25°C
¾ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 125 - 138 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 - 110 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 30.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 30 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Topcoat - Hempadur Mastic 45881 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 16 Hours 10 Hours 60 Days
30°C 4 Hours 4 Hours 15 Days
50°C 2 Hours 2 Hours 5 Days
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 to 0.023 inch
Fluid pressure: 3,600 psi
Conventional Spray : No
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 75 to 79%
4.2 Product Weight (ASTM D1475) : 1.37 to 1.43 Kg/L
4.3 Viscosity (ASTM D562) : 105 to 115 KU
4.4 Flash Point (ASTM D93 or D56) : 35°C (95°F)
Approval Date: December 22, 2004
Replaces : March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 31 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B
Type of Coating : Epoxy Primer: Polyamide Cured
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur Hi-Build 17300
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 5:1 by volume
Base : hardener
2.3 Thinner : Hempel's 08450
SAP M/N (SAMS S/N) : 1000198445 (09-738-280)
2.4 Thinning Requirements : maximum 5%
2.5 Induction Time : Nil
2.6 Pot Life : 3 hours @ 25°C
1 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 135 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 22.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 32 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B Primer - Hempadur Hi-Build 17300 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 6 Hours 10 Hours 60 Days
30°C 1-½ Hours 2-½ Hours 18 Days
50°C 1 Hour 1 Hour 7 Days
3.7 Recommended Equipment
Airless Spray : Tip size: 0.021 inch
Fluid pressure: 2,900 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 54 to 58%
4.2 Product Weight (ASTM D1475) : 1.47 to 1.53 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 80 KU
4.4 Flash Point (ASTM D93 or D56) : 26°C (79°F)
Approval Date: December 22, 2004
Replaces : March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 33 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B
Type of Coating : Epoxy Topcoat
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L
Product Name : Hempadur Hi-Build 45881
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960 (09-
612-375)
See APCS-1A Data Sheet
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 34 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C
Type of Coating : Zinc Rich Epoxy Primer
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur Zinc 17360
SAP M/N (SAMS S/N) : 1000195348 (09-612-580) or 1000195361 (09-612-590)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4:1 by volume
Base: Hardener
2.3 Thinner : Hempel's 08450
SAP M/N (SAMS S/N) : 1000198449 (09-738-240)
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 1-½ hours @ 25°C
½ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 80 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 35 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C Primer - Hempadur Zinc 17360 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 5 Hours 4 Hours None
30°C 1 Hour 1 Hours None
50°C ½ Hour ½ Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure sweet water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 to 0.021 inch
Fluid pressure 2,200 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 63 to 67%
4.2 Product Weight (ASTM D1475) : 2.67 to 2.73 Kg/L
4.3 Viscosity (ASTM D562) : 97 to 101 KU
4.4 Flash Point (ASTM D93 or D56) : 24°C (75°F)
Approval Date: December 22, 2004
Replaces : March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 36 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C
Type of Coating : Epoxy Topcoat
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur Hi-Build 45881
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960 (09-
612-375)
See APCS-1A Data Sheet
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 37 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat
Type of Coating : Polyurethane Topcoat: Aliphatic
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L
Product Name : Hempathane Topcoat 55210
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-612-
367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 7:1 by volume
Base:Hardener
2.3 Thinner : Hempel's 08080
SAP M/N (SAMS S/N) : 1000198479 (09-738-345)
2.4 Thinning Requirements : Up to 5% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 3 hours @ 25°C
1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 95 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 20.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 38 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat - Hempathane Topcoat 55210 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 1-1/4 Days 90 Days
30°C 8 Hours 12 Hours 60 Days
50°C 3 Hours 4 Hours 15 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 to 0.019 inch
Fluid pressure 2,200 psi
Conventional Spray : Tip size
Atomizing Pressure
Trowel/Hand : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 50 to 54%
4.2 Product Weight (ASTM D1475) : 1.17 to 1.23 Kg/L
4.3 Viscosity (ASTM D562) : 65 to 70 KU
4.4 Flash Point (ASTM D93 or D56) : 33°C (92°F)
Note: For APCS-1D, use APCS-1A as primer and intermediate coat. For APCS-1E, use APCS-1B as
primer and intermediate coat. For APCS-1F, use APCS-1C as primer and intermediate coat.
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 39 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2A/C
Type of Coating : Phenolic Epoxy: Amine Adduct Cured
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur 85671
SAP M/N (SAMS S/N) : 1000195232 (09-612-425) or 1000195235 (09-612-453) for APCS-2A;
1000195317 (09-612-518) or 1000195341 (09-612-546) for APCS-2B; and 1000194295 (09-612-312),
1000194298 (09-612-313) or 1000194352 (09-612-314) for APCS-2C
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 8.8:1.2 by volume,
base: hardener
2.3 Thinner : Hempel's 08450
SAP M/N (SAMS S/N): 1000198377 (09-738-140) for APCS-2A, 1000198372 (09-738-100)
for APCS-2B, and 1000198483 (09-738-380) for APCS-2C
2.4 Thinning Requirements : 10% maximum
2.5 Induction Time : 15 mins. @ 20°C
2.6 Pot Life : 2-¼ hours @ 25°C
¾ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 150 micrometers 3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 27.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 40 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2A/C - Hempadur 85671 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
5°C 1.9 days 65 days 23 days
10°C 25 Hours 1.5 days 50 days 18 Days
15°C 1.3 days 35 days 12.5 Days
20°C 1 day 21 days 7 Days
25°C 18 hours 15 days 5.5 days
30°C 5 Hours 12 hours 10 days 3.5 days
35°C 10 hours 8.5 days 3.25 days
40°C 8 hours 7 days 3 days
45°C 6 hours 5 days 2.5 days
50°C 1 hour 3 hours 3 days 2 days
55°C 2.5 hours 2 days 1.5 days
60°C 2 hours 1 day 1 day
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.021 inch
Fluid pressure 2,900 psi
Conventional Spray : No
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 66 to 70%
4.2 Product Weight (ASTM D1475) : 1.67 to 1.73 Kg/L
4.3 Viscosity (ASTM D562) : 88 to 95 KU
4.4 Flash Point (ASTM D93 OR D56) : 24°C (75°F)
Approval Date: March 28, 2009
Replaces: Dec. 22, 2004
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 41 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2B
Type of Coating : Phenolic Epoxy: Amine Adduct Cured
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur 85671
SAP M/N (SAMS S/N) : 1000195232 (09-612-425) or 1000195235 (09-612-453) for APCS-2A;
1000195317 (09-612-518) or 1000195341 (09-612-546) for APCS-2B; and 1000194295 (09-612-312),
1000194298 (09-612-313) or 1000194352 (09-612-314) for APCS-2C
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 8.8:1.2 by volume,
base: hardener
2.3 Thinner : Hempel's 08450
SAP M/N (SAMS S/N): 1000198377 (09-738-140) for APCS-2A, 1000198372 (09-738-100)
for APCS-2B, and 1000198483 (09-738-380) for APCS-2C
2.4 Thinning Requirements : 10% maximum
2.5 Induction Time : 15 mins. @ 20°C
2.6 Pot Life : 2-¼ hours @ 25°C
¾ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 150 micrometers 3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 27.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 42 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2B - Hempadur 85671 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 25 Hours 90 hours 45 days 18 Days
15°C 60 hours 30 days 14 Days
20°C 36 hours 21 days 10 Days
25°C 24 hours 16 days 8 days
30°C 5 Hours 18 hours 14 days 7 days
35°C 14 hours 11 days 6 days
40°C 10 hours 8 days 4 days
45°C 7 Hours 4 days 2.5 days
50°C 2 hours 5 Hours 3 days 2 days
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.021 inch
Fluid pressure 2,900 psi
Conventional Spray : No
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 66 to 70%
4.2 Product Weight (ASTM D1475) : 1.67 to 1.73 Kg/L
4.3 Viscosity (ASTM D562) : 88 to 95 KU
4.4 Flash Point (ASTM D93 OR D56) : 24°C (75°F)
Approval Date: Dec. 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 43 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2D
Type of Coating : Amine Adduct Cured Epoxy: Primer/Topcoat
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur 85210
SAP M/N (SAMS S/N) : 1000194354 (09-612-316) or 1000194357 (09-612-317)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4:1 by volume,
base: hardener
2.3 Thinner : Hempel's 89460
SAP M/N (SAMS S/N) : 1000198458 (09-738-290)
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 1-½ hours @ 25°C
½ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 150 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26.4M²/L
Dry Film Thickness
3.5Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 44 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2D Primer/Topcoat - Hempadur 85210 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 30 Hours 30 Hours 8 Days 18 Days
15°C 24 Hours 5 Days 14 Days
20°C 12 Hours 3 Days 11 Days
25°C 9 Hours 2 Days 7 Days
30°C 6 Hours 6 Hours 36 Hours 5 Days
35°C 5 Hours 24 Hours 4 Days
40°C 4 Hours 18 Hours 3 Days
45°C 3 Hours 14 Hours 2.5 Days
50°C 2 Hours 2 Hours 10 Hours 2 Days
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 inch
Fluid pressure 2,175 psi
Conventional Spray : No
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 1.37 to 1.43 Kg/L
4.3 Viscosity (ASTM D562) : 70 to 75 KU
4.4 Flash Point (ASTM D93 OR D56) : 35°C (95°F)
Approval Date: Dec. 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 45 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3
Type of Coating : Coal Tar Epoxy
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Coal Tar Epoxy Mastic 35670
SAP M/N (SAMS S/N) : 1000194372 (09-612-318) or 1000194375 (09-612-320)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4:1 by volume;
Base : hardener
2.3 Thinner : Hempel's 08450
SAP M/N (SAMS S/N) : 1000198441 (09-738-180)
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 6 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 220 micrometers
3.3 Typical Dry Film Thickness Per Coat : 200 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 36.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 46 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3 - Hempel's Coal Tar Epoxy Mastic 35670 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 1 Day 2 Days 17 Days 17 Days
15°C 1.5 Days 11 Days 11 Days
20°C 1 Day 7 Days 7 Days
25°C 19 Hours 5.5 Days 5.5 Days
30°C 12 Hours 15 Hours 4 Days 4 Days
35°C 12 Hours 3 Days 3 Days
40°C 9 Hours 2 Days 2 Days
45°C 7 Hours 1.5 Days 1.5 Days
50°C 6 Hours 5 Hours 1 Day 1 Hour
55°C 2 Hours 1.1 Days 17 Hours
60°C 1.2 Hours 17 Hours 12 Hours
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.023 inch
Fluid pressure 3,625 psi
Conventional Spray : No
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 90 to 94%
4.2 Product Weight (ASTM D1475) : 1. 47 to 1. 53 Kg/L
4.3 Viscosity (ASTM D562) : More than 141 KU
4.4 Flash Point (ASTM D93 OR D56) : 25°C (77°F)
Approval Date: Dec. 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 47 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4/6
Type of Coating : Zinc Phosphate Alkyd Primer
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's ZP Alkyd Primer 12090
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Hempel's 08230
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 98 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 19.6 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 48 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4/6 Primer – Hempel's ZP Alkyd Primer 12090 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 12 Hours 18 Hours 15 Days
30°C 5 Hours 5 Hours 2 Days
50°C 2 Hours 1.5 Hours 1 Day
3.7 Recommended Equipment
Airless Spray : Tip size: 0.018 inch
Fluid pressure: 2,200 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 48 to 51%
4.2 Product Weight (ASTM D1475) : 1.25 to 1.30 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 80 KU
4.4 Flash Point (ASTM D93 or D56) : 38°C (100°F)
Approval Date: Dec. 22, 2004
Replaces : March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 49 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4
Type of Coating : Aluminum Topcoat
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel’s Silvium 51570
SAP M/N (SAMS S/N) : 1000196402 (09-686-354)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 65 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 15.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 50 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4 – Hempel’s Silvium 51570 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1.5 Days 18 Hours None
30°C 8 Hours 5 Hours None
50°C 3 Hours 2 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 inch
Fluid pressure: 1,500 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 36 to 40%
4.2 Product Weight (ASTM D1475) : 0.97 to 1.03 Kg/L
4.3 Viscosity (ASTM D562) : 51 to 57 KU
4.4 Flash Point (ASTM D93 or D56) : 38°C (100°F)
4.5 Gloss (ASTM D523) : 100 to 110
Approval Date: Dec. 22, 2004
Replaces : March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 51 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : High Gloss Alkyd Enamel Topcoat
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempalin Enamel 52140
SAP M/N (SAMS S/N): 1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495 (09-630-763),
1000195532 (09-630-768), 1000195571 (09-630-769), 1000195577 (09-630-770), 1000195631 (09-
630-771), 1000195637 (09-630-773), 1000195650 (09-630-785), 1000195683 (09-630-794),
1000195685 (09-630-796), 1000195687 (09-630-798), 1000195689 (09-631-301), 1000195742 (09-
631-322), 1000195745 (09-631-450), 1000195747 (09-631-455), 1000195749 (09-631-462),
1000195801 (09-631-465), 1000195803 (09-631-590) or 1000195831 (09-631-645)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Hempel's Thinner 08230
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 75 micrometers
3.3 Typical Dry Film Thickness Per Coat : 35 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 18.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 52 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6 Topcoat - Hempalin Enamel 52140 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 2 Days 16 Hours None
30°C 12 Hours 5 Hours None
50°C 8 Hours 2 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size: 0.018 inch
Fluid pressure: 2,200 psi
Conventional Spray : Yes, Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 41 to 45%
44 to 48%
4.2 Product Weight (ASTM D1475) : 0.87 to 0.93 Kg/L
1.07 to 1.13 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 80 KU
4.4 Flash Point (ASTM D93 or D56) : 38°C (100°F)
4.5 Gloss (ASTM D523) : 90 @ 60°C
Approval Date: Dec. 22, 2004
Replaces : March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 53 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-9
Type of Coating : Chlorinated Rubber (Self-Priming)
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempatex Hi-Build 46330
SAP M/N (SAMS S/N) : 1000196351 (09-685-442), 1000196312 (09-685-436), 1000196317
(09-685-438), 1000196355 (09-685-448), 1000196359 (09-685-450)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Hempel's 08080 (Xylene)
SAP M/N (SAMS S/N) :
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 120 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 16.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 54 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-9; Self-Priming - Hempatex 1635 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 16 Hours None
30°C 8 Hours 4 Hours None
50°C 2 Hours 1.5 hours None
3.7 Recommended Equipment
Airless Spray : Tip size: 0.021 to 0.023 inch
Fluid pressure: 2,200 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 40 to 44%
4.2 Product Weight (ASTM D1475) : 1.37 to 1.43 Kg/L
4.3 Viscosity (ASTM D562) : 80 to 90 KU
4.4 Flash Point (ASTM D93 or D56) : 32°C (90°F)
Approval Date: December 22, 2004
Replaces : July 7, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 55 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-10
Type of Coating : Bituminous
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempinol HB 10270
SAP M/N (SAMS S/N) : 1000194025 (09-611-715), 1000194029 (09-611-720) or 1000194032 (09-
611-725)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Hempel's 08080 (Xylene)
SAP M/N (SAMS S/N) :
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 45°C
3.2 Typical Wet Film Thickness Per Coat : 605 micrometers
3.3 Typical Dry Film Thickness Per Coat : 375 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2 for buried service
3 for immersion service
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 56 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-10 - Hempinol HB 10270 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 3 Days 2 Days None 7 Days
30°C 1 Day 18 Hours None 5 Days
50°C 18 Hours - None 3 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.031 inch
Fluid pressure 2,900 psi
Conventional Spray : No
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 60 to 64%
4.2 Product Weight (ASTM D1475) : 1.19 to 1.21 Kg/L
4.3 Viscosity (ASTM D562) : More than 141 KU
4.4 Flash Point (ASTM D93 OR D56) : 38°C (100°F)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 57 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Solvent Based
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Galvosil 15780
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 6 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 10 L Liquid: 17.8 Kg Zinc Dust
2.3 Thinner : Hempel's 08700
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : 50% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 9 hours @ 25°C
3 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 75 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 58 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Primer - Hempel's Galvosil 1578 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 4 Hours 4 Days None
30°C 1 Hour 1 Day None
50°C ¼ Hour 6 Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure sweet water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.019 to 0.023 inch
Fluid pressure 1,500 psi
Conventional Spray : Tip Size 0.070 to 0.085 inch
Atomizing Pressure 20 to 35 psi
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 2.37 to 2.43 Kg/L
4.3 Viscosity (ASTM D562) : 67 to 73 KU
4.4 Flash Point (ASTM D93 or D56) : 14°C (57°F)
Note: Overcoating is to be done when the inorganic zinc is fully cured. The minimum overcoating
time is valid @ 75% relative humidity and sufficient ventilation.
Approval Date: December 24, 2004
Replaces : March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 59 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Water Based
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Galvosil 15610
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 8.1 Kg Liquid: 23.3 Kg Zinc
Dust
2.3 Thinner : Fresh Water (sweet water)
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : 50% maximum
2.5 Induction Time : N/A
2.6 Pot Life : 3-¾ hours @ 25°C
1-¼ hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 75 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 27.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 60 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Primer - Hempel's Galvosil 1561 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 4 Hours 30 Days None
30°C 1 Hour 7 Days None
50°C ¼ Hour 2 Days None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : Tip Size 0.070 to 0.085 inch
Atomizing Pressure 20 to 35 psi
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 66 to 70%
4.2 Product Weight (ASTM D1475) : 3.07 to 3.13 Kg/L
4.3 Viscosity (ASTM D562) : 67 to 73 KU
4.4 Flash Point (ASTM D93 or D56) : N/A
Note 1: This Manufacturer Approved Saudi Aramco Data Sheet is not a complete product datasheet.
For details, please consult Hempel’s (technical) product data sheets, or contact Hempel for
further information
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 61 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Silicone Aluminum Topcoat
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Silicone Aluminium 56910
SAP M/N (SAMS S/N) : 1000196488 (09-687-325)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Hempel's 08080 (Xylene)
SAP M/N (SAMS S/N) :
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 75 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 14 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 62 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Topcoat - Hempel's Silicone Aluminum 56910 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 12 Hours 2 Days None
30°C 4 Hours 18 Hours None
50°C 1.5 Hour 8 Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 inch
Fluid pressure 1,800 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 33 to37%
4.2 Product Weight (ASTM D1475) : 1.07 to 1.13 Kg/L
4.3 Viscosity (ASTM D562) : 59 to 65 KU
4.4 Flash Point (ASTM D93 or D56) : 25°C (77°F)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 63 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Acrylic Modified Silicone Topcoat
Arabia) W.L.L.
Product Name : Hempel's Silicone Acrylic 56940
SAP M/N (SAMS S/N) : 1000196488 (09-687-325)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Hempel's 08080 (Xylene)
SAP M/N (SAMS S/N) :
2.4 Thinning Requirements : 15% maximum
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 85 micrometers (Aluminum)
50 micrometers (colors)
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 11.6 M²/L (Aluminum)
Dry Film Thickness 21.2 micrometers (colors)
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 64 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Topcoat - Hempel's Silicone Acrylic 56940 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 7 Hours 16 Hours None
30°C 2 Hours 5 Hour None
50°C ½ Hour 1.5 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 inch
Fluid pressure 1,800 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 27 to 31% (Aluminum)
51 to 55% (colors)
4.2 Product Weight (ASTM D1475) : 1.07 to 1.13 Kg/L (Aluminum)
1.37 to 1.43 kg/l (colors)
4.3 Viscosity (ASTM D562) : 59 to 65 KU (Aluminum)
78 to 83 KU (colors)
4.4 Flash Point (ASTM D93 or D56) : 25°C (77°F)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 65 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B
Type of Coating : Silicone Aluminum
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Silicone Aluminium 56910
SAP M/N (SAMS S/N) : 1000196502 (09-687-330)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Hempel's 08080 (Xylene)
SAP M/N (SAMS S/N) : 1000196502
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 75 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 14 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 66 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B - Hempel's Silicone Aluminium 56910 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 12 Hours 2 Days None
30°C 4 Hours 18 Hours None
50°C 1.5 Hour 8 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 inch
Fluid pressure 1,800 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 33 to 37%
4.2 Product Weight (ASTM D1475) : 1.07 to 1.13Kg/L
4.3 Viscosity (ASTM D562) : 59 to 65 KU
4.4 Flash Point (ASTM D93 or D56) : 25°C (77°F)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 67 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Primer: Polyamide-Cured
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur HB Primer 17300 or Hempadur 15570
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
(Refer to APCS-1B Primer Data Sheet)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 68 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Topcoat: Polyamide-Cured
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur Mastic 45881
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960 (09-
612-375)
(Refer to APCS-1B topcoat data sheets. Also, refer to APCS-12 of Saudi Aramco Engineering Standard
SAES-H-101 for application of aggregates (Hempel's Anti-Slint 67500).
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 69 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A
Type of Coating : Inorganic Zinc Primer: Solvent Based
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Galvosil 85710
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 6 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 8.1 Kg Liquid: 20.5 Kg Zinc Dust
2.3 Thinner : Hempel's 08700
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : 30% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 6 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 91 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 28.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 70 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A - Hempel's Galvosil 85710 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 4 Hours 7 Days None
30°C 1 Hour 2 Days None
50°C ¼ Hour 10 Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.019 to 0.023 inch
Fluid pressure 1,450 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 70 to 74%
4.2 Product Weight (ASTM D1475) : 2.89 to 2.91 Kg/L
4.3 Viscosity (ASTM D562) : 92 to 98 KU
4.4 Flash Point (ASTM D93 or D56) : 18°C
Note: Topcoating is done when the inorganic zinc primer is fully cured. The minimum overcoating
time is valid @ 75% relative humidity and sufficient ventilation.
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 71 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A
Type of Coating : Inorganic Zinc Primer: Solvent Based
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Galvosil 15780
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 6 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 10 L Liquid: 17.8 Kg Zinc Dust
2.3 Thinner : Hempel's 08700
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : 50% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 9 hours @ 25°C
3 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 105 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 72 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A - Hempel's Galvosil 15780 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 4 Hours 4 Days None
30°C 1 Hour 1 Day None
50°C ¼ Hour 6 Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure sweet water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.019 to 0.023 inch
Fluid pressure 1,500 psi
Conventional Spray : Tip Size 0.070 to 0.085 inch
Atomizing Pressure 20 to 35 psi
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 2.37 to 2.43 Kg/L
4.3 Viscosity (ASTM D562) : 67 to 73 KU
4.4 Flash Point (ASTM D93 or D56) : 14°C C (57°F)
Note 1: Topcoating shall be applied when the inorganic zinc primer is fully cured. The minimum
overcoating time is valid @ 75% relative humidity and sufficient ventilation.
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 73 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B
Type of Coating : Inorganic Zinc Primer: Water Based
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Galvosil 15610
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 8.1 Kg Liquid:23.3 Kg Zinc Dust
2.3 Thinner : Fresh water (sweet water)
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : 50% max. for conventional spray
2.5 Induction Time : Nil
2.6 Pot Life : 3-¾ hours @ 25°C
1-¼ hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 95micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 27.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 74 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B - Hempel's Galvosil 15610 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 4 Hours 30 Days None
30°C 1 Hour 7 Days None
50°C ¼ Hour 2 Days None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : Tip Size: 0.070 to 0.085 inch
Atomizing Pressure: 20 to 35 psi
Brush : For touch-up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 66 to 70%
4.2 Product Weight (ASTM D1475) : 3.07 to 3.13 g/L
4.3 Viscosity (ASTM D562) : 67 to 73 KU
4.4 Flash Point (ASTM D93 or D56) : N/A
Note 1: Topcoating shall be applied when the inorganic zinc primer is fully cured. The minimum
overcoating time is valid @ 75% relative humidity and sufficient ventilation.
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 75 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19A
Type of Coating : Splash Zone Compound: Hand-Applied
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : HempadurMulti-Mil 85490
(Formerly Hempadur 3543-SA)
SAP M/N (SAMS S/N) : 1000194524 (09-612-345)
1. Storage
1.1 Shelf life, sheltered storage @ 35° C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1:1, Base:Hardener by volume
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life : 1-½ hours @ 25°C
½ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 2,500 micrometers
3.3 Typical Dry Film Thickness Per Coat : 2,500 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 76 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19A - Multi-Mil 8549 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried*
10°C 20 Hours 23 hours 7 days 10 hours 8 Days
30°C 9 Hours 6 hours 2 days 3 hours 2 Days
50°C 3 Hours 2 hours 15 hours 2 hours 12 hours
Note:
* For soil burial, the coating must be hard enough to withstand backfill. The backfill time can
be shortened or extended slightly @ the discretion of the Saudi Aramco coating inspector.
3.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : N/A
Trowel/Hand : Suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.57 to 1.63 Kg/L
4.3 Viscosity (ASTM D562) : More than 141 KU
4.4 Flash Point (ASTM D93 or D56) : N/A
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 77 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19B
Type of Coating : Splash Zone Compound: Spray-Applied
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur Spray-Guard 85550 (Old Reference Number 3549)
SAP M/N (SAMS S/N) : 1000194520 (09-612-339)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 5.3:1, Base:Hardener by volume
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life : ¾ hour @ 25°C
¼ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 2,500 micrometers
3.3 Typical Dry Film Thickness Per Coat : 2,500 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 78 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19B - Hempadur 85550 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried*
10°C 16 hours 18 hours 60 days 2 days 14 days
30°C 8 hours 4 hours 14 days 12 hours 3-½ days
50°C 3 hours 1 hour 3 days 3 hours 21 hours
Note:
* For soil burial, the coating must be hard enough to withstand backfill. The backfill time can
be shortened or extended slightly @ the discretion of the Saudi Aramco coating inspector.
3.7 Recommended Equipment
Airless Spray : Graco President 10:1 Model 225-
841, Carousel pump or quick spray
hopper gun (for small areas)
Conventional Spray : N/A
Hand Application : Not suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.87 to 1.93 Kg/L
4.3 Viscosity (ASTM D562) : More than 141 KU
4.4 Flash Point (ASTM D93 or D56) : >60°C (140°F)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 79 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A
Type of Coating : Fiberglass Reinforced Epoxy: Hand-Applied
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Epoxy Resin System 05500
SAP M/N (SAMS S/N) : None
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1.8:1, Base:Hardener by volume
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : ¼ hour
2.6 Pot Life : 3 hours @ 25°C
1 hour @ 40°C
3. Application
3.1 For Corrosion Protection
3.1.1 Abrasive blast clean to Sa 2-1/2 with surface profile Rugotest #3 BN11 min.
Apply Hempadur 1559 or suitable blast primer/sealer recommended by the
coating manufacturer. All sharp dimensional changes such as welds, plate
laps, and fillets shall be filled with an epoxy patching or caulking compound
recommended by the coating manufacturer. The minimum throat dimension
of shell-to-bottom of storage tanks shall be 25 mm.
3.1.2 Apply epoxy resin @ about 500 micrometers wet film thickness (WFT) onto
primed surface.
3.1.3 Apply a layer of 450 G/M² fiberglass mat to the wet resin.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 80 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A - Hempel's 05500 (Cont'd)
3.1.4 Straighten out the mat and lay it onto the wet resin. Roll with serrated rollers
to remove wrinkles and entrapped air.
3.1.5 Apply epoxy resin @ about 500 micrometers WFT. (The total WFT of the
coating system up to this paragraph should be approximately 1500
micrometers.)
3.2
3.2.1 When the coating is dry, repeat procedures 3.1.2 to 3.1.5. However, the
fiberglass mat should be laid @ right angle (90 degrees) to that previously
installed.
3.2.2 When dry, apply one seal coat of epoxy resin @ a WFT of 300 micrometers.
3.3 Recommended Materials & Equipment
3.3.1 Primer : Hempadur 15590
3.3.2 Caulking Compound: Mixture of Hempel’s
Epoxy Resin 05500 and Hempel’s Anti Slint 67500
Approx. 2.0-2.5 kgs 67500 to 750 ml of mixed resin 05500
3.3.3 Hempadur Multi-Mil 85490: Filler for deep pittings
3.3.4. Roller/brush for the resin and hand application for the fiberglass mat.
3.3.5. Aluminium/Stainless Steel Serrated Rollers for pressing of fibermat
3.3.6. Hempel’s Glassfibre Mat 690SA/ Hempel’s Glassfibre Surfacing Tissue
691SA
Note: Please also refer to Hempel’s Application Instructions for Hempel’s Epoxy
Resin 05500
3.4 Maximum Allowable Substrate Temperature : 50°C
3.5 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried
10°C 54 hours 54 hours 54 days 16 Days N/A
30°C 14 hours 14 hours 14 day 3-½ Days N/A
50°C 4 hour 4 hours 4 days 2 Days N/A
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 81 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A - Hempel's 05500 (Cont'd)
3.5 Recommended Equipment
Conventional spray for the resin and hand application for the fiberglass mat.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.07 to 1.13 Kg/L
4.3 Viscosity (ASTM D562) : More than 140 KU
4.4 Flash Point (ASTM D93 or D56) : N/A
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 82 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20B
Type of Coating : Fiberglass Reinforced Epoxy: Spray-Applied
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempel's Sprayfibre 35890
SAP M/N (SAMS S/N) : None
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base: Hardener By Volume) : 2:1
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life :
3. Application
3.1 Abrasive blast clean to Sa 2-1/2 with surface profile Rugotest #3 BN11 min.
3.2 Apply one coat of primer (Hempadur 1559) to a dry film thickness of 40 micrometers.
3.3 When dry but within 30 days and by using modified "Graco" Hydracat, apply Hempel's
Sprayfibre 3588 caulking material to all welds, plate laps, fillets and other areas of
sharp dimensional changes.
3.4 When dry but within three days @ 20°C, apply a mixture of Hempel's Sprayfibre 35890
and a chopped fiberglass. The mixture is applied by a modified Graco hydracat to a
minimum of 1,250 micrometers dry film thickness. The fiberglass is applied @
approximately 450 g/m².
3.5 When dry but within two days @ 20°C, apply a gel coat of Sprayfibre 3589 by using a
Graco hydracat. The dry film thickness should be 350 micrometers minimum.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 83 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20B - Sprayfibre 3589 (Cont'd)
3.6 The system should have a minimum total of 1,600 micrometers film thickness.
3.7 Recommended Materials & Equipment
3.7.1 Primer : Hempadur 15590
3.7.2 Caulking Compound: Mixture of Hempel’s
Epoxy Resin 35890 and Hempel’s Anti Slint 67500
Approx. 2.0-2.5 kgs 67500 to 750 ml of mixed resin 35890
3.7.3 Hempadur Multi-Mil 85490: Filler for deep pitting
3.7.4 Aluminum/Stainless Steel Serrated Rollers for pressing of chopped fiberglass
3.7.5 Hempel’s GlassFibre Roving 689SA
3.8 Maximum Allowable Substrate Temperature : 50°C
3.9 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 1 Day 1 Day 2.5 Days 16Days
30°C 12 Hours 12 Hours 1 Day 3-½ Days
50°C 4 Hours 4 Hours 10 Hours 2 Days
3.9 Recommended Equipment
Specialized "Graco" hydrocat with fiber chopper.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.17 to 1.23 Kg/L
4.3 Viscosity (ASTM D562) : 100 to 120 KU
4.4 Flash Point (ASTM D93 or D56) : 26°C for 1559
96°C for 3589
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 84 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A
Type of Coating : Polyamine Cured Epoxy; Two-Coat Epoxy
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur Mastic 45070
SAP M/N (SAMS S/N) : Primer: 09-612-352/357/358/359/360/361/459/462/465/467; 1000194560 (09-612-352) or 1000195239 (09-612-459); Topcoat:
1000194565 (09-612-357), 1000194568 (09-612-358), 1000194590
(09-612-359), 1000195273 (09-612-462), 1000195277 (09-612-465) or
1000195314 (09-612-467)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base: hardener By Volume) : 4:1
2.3 Thinner : Hempel's Thinner 08450
SAP M/N (SAMS S/N) : 1000198471 (09-738-300)
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 1-1/2 hours @ 25°C
1/2 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 205 micrometers
3.3 Typical Dry Film Thickness Per Coat : 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 29.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 85 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A - Hempadur Mastic 45070 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 32 Hours 32 Hours 10 Days
20°C 16 Hours 16 Hours 5 days
30°C 10 Hours 10 Hours 3 5 Days
40°C 6 Hours 6 9 Hours 1-½ Days
50°C 4 Hours 4 Hours 1 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.023 inch
Fluid pressure 3,600 psi
Conventional Spray : N/A
Trowel/Hand : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 71 to 75%
4.2 Product Weight (ASTM D1475) : 1.37 to 1.43 5 Kg/L
4.3 Viscosity (ASTM D562) : 105 to 115 03 KU
4.4 Flash Point (ASTM D93 or D56) : 35°C (95°F)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 86 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-23
Type of Coating : High Temperature Bituminous Coating
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempinol Black H.B. 10270
SAP M/N (SAMS S/N) : 1000194097 (09-611-754) or 1000194111 (09-611-757)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Hempel's 08080 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 45°C
3.2 Typical Wet Film Thickness Per Coat : 403 micrometers
3.3 Typical Dry Film Thickness Per Coat : 250 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2 for buried service
3 for immersion service
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 87 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-23 - Hempinol H.B. 10270 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 3 Days 2 Day None 7 Days
30°C 1 Day 14 Hours None 5 Days
50°C 18 Hours 4-1/2 Hours None 3 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.031 inch
Fluid pressure 2,900 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 60 to 64%
4.2 Product Weight (ASTM D1475) : 1.17 to 1.23 Kg/L
4.3 Viscosity (ASTM D562) : More than 141 KU
4.4 Flash Point (ASTM D93 OR D56) : 38°C (100°F)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 88 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26
Type of Coating : Polyamine Cured Epoxy Mastic
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempadur Mastic 45881
SAP M/N (SAMS S/N) : 1000194381 (09-612-330), 1000194386 (09-612-331), 1000194401
(09-612-332), 1000194407 (09-612-333), 1000194420 (09-612-334),
1000194427 (09-612-335) or 1000194471 (09-612-336)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (By Volume) : 3:1
2.3 Thinner : Hempel's 08450
SAP M/N (SAMS S/N) : 1000198487 (09-738-420)
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : Nil
2.6 Pot Life : 2-1/4 hours @ 25°C
3/4 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 200 micrometers;
169 micrometers (Aluminum)
3.3 Typical Dry Film Thickness Per Coat : 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 30.8 M²/L
Dry Film Thickness 29.6 M²/L (Aluminum)
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 89 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26 - Hempadur Mastic 45881 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 16 Hours 10 Hours 60 Days
30°C 4 Hours 4 Hours 15 Days
50°C 2 Hours 2 Hour 5 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 to 0.023 inch
Fluid pressure 3,600 psi
Conventional Spray : Tip size
Atomizing Pressure
Trowel/Hand : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 75 to 79%
72 to 76% (Aluminum)
4.2 Product Weight (ASTM D1475) : 1.37 to 1. 43 Kg/L
1.33 to 1.39 Kg/L (Aluminum)
4.3 Viscosity (ASTM D562) : 105 to 115 KU
4.4 Flash Point (ASTM D93 or D56) : 35°C (95°F)
Approval Date: December 22, 2004
Replaces: March 25, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 90 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-26T TOPCOAT
Type of Coating : Aliphatic Polyurethane Topcoat
Manufacturer : Hempel Paints (Saudi Arabia) W.L.L.
Product Name : Hempathane Topcoat 55210
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793
(09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
(Refer to APCS-26 data sheet for the primer and to polyurethane of APCS-1D/E/F data sheet for the
topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 91 of 398
5 International – Approved Products
APCS-1A Interzinc 22 Inorganic Zinc Primer: Solvent Based
Interzinc 250 Inorganic Zinc Primer: Water-Based
Intergard 410 Epoxy Topcoat: Red/Gray/Yellow
APCS-1B Intergard 291 Epoxy Primer: Red Oxide
Intergard 410 Epoxy Topcoat: Red/Gray/Yellow
APCS-1C Interzinc 52 Zinc-Rich Epoxy Primer: Gray
Intergard 410 Epoxy Topcoat: Red/Gray/Yellow
APCS-1D (Use APCS-1A as primer and internediate coat.)
Interthane 990 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1E (Use APCS-1B as primer and internediate coat.)
Interthane 990 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1F (Use APCS-1C as primer and internediate coat.)
Interthane 990 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-2D Interline 925 Primer: Yellow FS 595a 23594
Topcoat: White FS 595a 27780
APCS-2G Interline 955 Vinyl Ester: Glass Flake Reinforced
APCS-3 Intertuf 708 Coal Tar Epoxy
APCS-4 Interprime 409 Zinc Phosphate Primer: Red
Intertherm 891 Aluminum Topcoat
APCS-6 Interprime 409 Zinc Phosphate Primer: Red
Interlac 665 Alkyd Topcoat: Various Colors
APCS-9 Interchlor 37 Chlorinated Rubber: Gray/Green/Brown/Blue
APCS-11A Interzinc 22 Inorganic Zinc Primer: Solvent-Based
or Interzinc 250 Inorganic Zinc Primer: Water-Based
Intertherm 50 Heat Resistant Topcoat: Aluminum
APCS-11B Intertherm 50 Heat Resistant System: Aluminum
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 92 of 398
- 2 -
APCS-12 Intergard 291 Epoxy Primer: Red Oxide
Intergard 410 Epoxy Topcoat: Red/Gray/Yellow
APCS-17A Interzinc 22 Inorganic Zinc System: Solvent-Based
APCS-17A Interzinc 250 Inorganic Zinc System: Solvent-Based
APCS-20B Interline 982 Holding Primer (use if required)
Interline 983 Caulking Material
Interline 985 Matcote Resin
APCS-22A Interseal 414 Epoxy Primer: Red Oxide
Interzone 954 Epoxy Topcoat: Gray/Yellow/Black
APCS-22B Interzone 954 One-Coat Epoxy: Gray/Yellow/Red/Orange
Blue/Green/White
APCS-26 Interseal 738 Epoxy Mastic: Aluminum/White/Orange/Red/
Yellow/Gray/Black
APCS-26T (Use APCS-26 as primer and Interthane 990 in APCS-1D as topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 93 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzinc 22
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 2.08 parts by weight QHA027
to 1 part weight of QHA028
2.3 Thinner : GTA 803
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 4 hours @ 25°C and 50% RH
2 hours @ 40°C and 50% RH
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 103 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 94 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Interzinc 22 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10° C 3 Hours 6 Hours Indefinite
30° C 2 Hours 4 Hours Indefinite
50°C ¾ Hour 4 Hours Indefinite
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
As with all Zinc Silicates, paint reservoir should be equipped with a mechanical
agitator.
Airless Spray : Tip size 0.017 to 0.020 inch
Fluid pressure 1,600 psi
Conventional Spray : Tip size
Atomizing Pressure
Trowel/Hand : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 61 to 65%
4.2 Product Weight (ASTM D1475) : 2.42 to 2.62 Kg/L
4.3 Viscosity (ASTM D562) : 70 to 80 KU
4.4 Flash Point (ASTM D93 or D56) : 10°C
5. Special Instruction - Curing stops @ below 50% relative humidity.
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 95 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzinc 250
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 2.43 parts by weight TQA252
to 1 part weight TAQ253
2.3 Thinner : Water: Sweet
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : 8 hours @ 25°C
4 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 96 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 31.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 96 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Interzinc 250 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 30 Minutes 6 Hours Indefinite
30°C 12 Minutes 4 Hours Indefinite
50°C 5 Minutes 4 Hours Indefinite
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
As with all Zinc Silicates, paint reservoir should be equipped with a mechanical
agitator.
Airless Spray : Tip size 0.018 to 0.021 inch
Fluid pressure 2,300 psi
Conventional Spray : Tip size
Atomizing Pressure
Trowel/Hand : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 75 to 80%
4.2 Product Weight (ASTM D1475) : 3.1 to 3.3 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : N/A
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 97 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat
Type of Coating : Epoxy Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Intergard 410
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960 (09-612-
375)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4 parts EM series to 1 part
EBA 744 by volume
2.3 Thinner : GTA220
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 6 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 167 to 250 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 to 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 98 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat - Intergard 410 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 6 Hours 1 Days 10 Days
30°C 2 Hours 12 Hours 7 Days
50°C 1 Hour 6 Hours 4 Days
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.023 inch
Fluid pressure 2,500 psi
Conventional Spray : Tip size
Atomizing Pressure
Trowel/Hand : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 58 to 62%
4.2 Product Weight (ASTM D1475) : 1.20 to 1.40 Kg/L
4.3 Viscosity (ASTM D562) : 97 to 107 KU
4.4 Flash Point (ASTM D93 or D56) : 23°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 99 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B
Type of Coating : Epoxy Primer
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Intergard 291
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4:1 (EPA530:EPA501)
by volume
2.3 Thinner : GTA 220
SAP M/N (SAMS S/N) : 1000198455 (09-738-280)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 8 hours @ 25°C
3 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 142 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 21.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 100 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B Primer - Intergard 291 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 36 Hours 24 Hours Indefinite ???
30°C 36 Hours 16 Hours Indefinite ???
50°C 16 Hours 12 Hours Indefinite ???
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid pressure 2,500 psi
Conventional Spray : Tip size
Atomizing Pressure
Trowel/Hand : For touch-up and small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 51 to 55%
4.2 Product Weight (ASTM D1475) : 1.29 to 1.35 Kg/L
4.3 Viscosity (ASTM D562) : 56 to 66 KU
4.4 Flash Point (ASTM D93 or D56) : 23°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 101 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C
Type of Coating : Zinc-Rich Epoxy Primer
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzinc 52
SAP M/N (SAMS S/N) : 1000195348 (09-612-580) or 1000195361 (09-612-590)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4:1 (EPA094:EPA095)
by volume
2.3 Thinner : GTA 220
SAP M/N (SAMS S/N) : 1000198449 (09-738-240)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 5 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 127 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 20 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 102 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C Primer - Interzinc 52 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 2-½ Hours 6 Hours Indefinite
30°C 1 Hour 4 Hours Indefinite
50°C 30 Minutes 2 Hours Indefinite
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid pressure 2,500 psi
Conventional Spray : Tip size
Atomizing Pressure
Trowel/Hand : For touch-up and small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 57 to 61%
4.2 Product Weight (ASTM D1475) : 2.42 to 2.62 Kg/L
4.3 Viscosity (ASTM D562) : 80 to 90 KU
4.4 Flash Point (ASTM D93 or D56) : Greater than 23°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 103 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat
Type of Coating : Polyurethane Enamel Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interthane 990
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793
(09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 6 parts of A with
1 part B by volume
2.3 Thinner : GTA 713
SAP M/N (SAMS S/N) : 1000198479 (09-738-345)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 2 hours @ 25°C
¾ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 88 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 22.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 104 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F - Interthane 990 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 10 Hours 10 Hours 90 Days
30°C 6 Hours 6 Hours 60 Days
50°C 3 Hours 3 Hours 15 Days
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow drying.
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 to 0.021 inch
Fluid Pressure 2,200 psi minimum
Conventional Spray : Tip size
Atomizing Pressure
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 57 to 60%
4.2 Product Weight (ASTM D1475) : 1.2 to 1.3 Kg/L
depending on color
4.3 Viscosity (ASTM D562) : 70 to 80 KU
4.4 Flash Point (ASTM D93 or D56) : 34°C
5. Additional Notes, Precautions or Special Instructions : Like the other polyurethanes, the
applicator should wear an air fed
hood when spraying
Note: Use either APCS-1A, 1B or 1C (see previous data sheets) as primer and intermediate coat, and
the dry film thickness should be in accordance with APCS-1D, 1E or 1F of SAES-H-101.
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 105 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2D
Type of Coating : Epoxy Primer/Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interline 925 (THA125/THA126 Cream; THA125/THA127 White)
SAP M/N (SAMS S/N) : Primer 1000194354 (09-612-316) and 1000194357 (09-612-317)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 3:1 by volume, Base: Hardener
2.3 Thinner : GTA 220
SAP M/N (SAMS S/N) : 1000198458 (09-738-290)
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life : 1-¼ hours @ 25°C
⅔ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 125 micrometers
3.3 Typical Dry Film Thickness Per Coat : 125 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 106 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2D Primer/Topcoat - Interline 925 (Cont'd)
3.6 Drying Time
Substrate Dry to Handle Ovecoat Interval To Immersion
Temperature and Walk-on Minimum Maximum (Minimum)
10°C 24 Hours 36 Hours 5 Days 10 Days
15°C 24 Hours 3 Days 10 Days
20°C 20 Hours 2.5 Days 7 Days
25°C 17 Hours 30 Hours 7 Days
30°C 6 Hours 14 Hours 24 Hours 7 Days
35°C 10 Hours 18 Hours 7 Days
40°C 7 Hours 16 Hours 6 Days
45°C 6 Hours 14 Hours 6 Days
50°C 6 Hours 5 Hours 12 Hours 5 Days
55°C 4 Hours 12 Hours 5 Days
60°C 4 Hours 12 Hours 5 Days
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.025 inch
Fluid pressure 3,000 psi
Conventional Spray : Not recommended
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 98 to 100%
4.2 Product Weight (ASTM D1475) : 1.40 to 1.60 Kg/L
4.3 Viscosity (ASTM D562) : 125 to 150 KU
4.4 Flash Point (ASTM D93 OR D56) : 101°C
Approval Date: January 9, 2005
Replaces: January 6, 1998
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 107 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2G
Type of Coating : Vinyl Ester: Glass Flake Reinforced;
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interline 955 (TEA600/TEA150/TEA075)
SAP M/N (SAMS S/N) : Base plus catalyst in one box 1000709300 (09-000-502); Retarder
1000709303 (09-000-505)
1. Storage
1.1 Shelf life, sheltered storage @ <20°C maximum : 6 months
2. Mixing
2.1 No. of Components : Two (without hardener)
2.2 Mixing Ratio : Base 19.6 liters: Hardener 400 ml:
Retarder 50 ml
2.3 Thinner : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life : 40 minutes @ 25°C without retarder
40 minutes @ 35°C with retarder
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 706 to 1,176 micrometers
3.3 Typical Dry Film Thickness Per Coat : 600 to 1,000 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 34 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 108 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2G - Interline 955 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water
10°C 6 Hours 6 Hours 3 Days 3 Days
30°C 5 Hours 5 Hours 2 Days 2 Days
50°C 5 Hours 5 Hours 1 Day 1 Day
3.7 Recommended Equipment
Airless Spray : Pump Ratio 45:1 minimum
Tip size 0.025 to 0.035 inch
Fluid pressure 3,000 psi
Conventional Spray : Not recommended
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 85%
4.2 Product Weight (ASTM D1475) : 1.2 Kg/L
4.3 Viscosity (ASTM D562) : KU
4.4 Flash Point (ASTM D93 OR D56) : 32°C (Mixture)
Note:
1. For tool cleaning, use GTA 853 available in SAP M/N (SAMS S/N) 1000709301 (09-000-503-00).
2. The main component of the coating mixture is the base and catalyst. If retarder (third component) is
required to delay curing in summer, contact the manufacturer on tel 812-1044 for mixing instruction.
Approval Date: October 25, 2005
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 109 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3
Type of Coating : Coal Tar Epoxy: Self-Priming
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Intertuf 708
SAP M/N (SAMS S/N) : 1000194372 (09-612-318) or 1000194375 (09-612-320)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4 parts JXA323 or 324with
1 part JXA325 by volume
2.3 Thinner : GTA 220
SAP M/N (SAMS S/N) : 1000198441 (09-738-180)
2.4 Thinning Requirements : Up to 10% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 2 hours @ 25°C
30 minutes @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 338 micrometers
3.3 Typical Dry Film Thickness Per Coat : 250 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 29.6 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 110 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3 – Intertuf 708 (Cont'd)
3.6 Drying Time
Substrate Dry to Handle Ovecoat Interval To Immersion
Temperature and Walk-on Minimum Maximum (Minimum)
5°C 2 Days 14 Days 14 Days
10°C 1 Day 1 Day 10 Days 10 Days
15°C 22 Hours 9 Days 9 Days
20°C 20 Hours 8 Days 8 Days
25°C 18 Hours 7 Days 7 Days
30°C 16 Hours 16 Hours 5 Days 5 Days
35°C 14 Hours 3 Days 3 Days
40°C 12 Hours 2.5 Days 3 Days
45°C 10 Hours 2.3 Days 3 Days
50°C 9 Hours 9 Hours 2 Days 2 Days
55°C 8 Hours 2 Days 2 Days
60°C 7 Hours 1.5 Days 2 Days
* Before overcoating after exposure in a contaminated environment, clean thoroughly by
high pressure fresh water hosing and allow to dry. (Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.027 inch
Fluid pressure 2,500 psi
Conventional Spray : Not normally recommended
Brush : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 73 to 77%
4.2 Product Weight (ASTM D1475) : 1.29 to 1.49 Kg/L
4.3 Viscosity (ASTM D562) : 115 to 125 KU
4.4 Flash Point (ASTM D93 OR D56) : 27°C
5. Additional Notes: To ensure adequate curing, do not apply when steel temperature falls below
10°C.
Approval Date: January 9, 2005
Replaces: January 6, 1998
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 111 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4/6
Type of Coating : Zinc Phosphate Primer
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interprime 409
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : GTA004
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 53 micrometers
3.3 Typical Dry Film Thickness Per Coat : 38 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 20 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 112 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4/6 Primer – Interprime 409 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 20 Hours 20 Hours Indefinite
30°C 12 Hours 12 Hours Indefinite
50°C 6 Hours 6 Hours Indefinite
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.019 inch
Fluid pressure 2,500 psi
Conventional Spray : Tip size
Atomizing Pressure 40 to 60 psi
Trowel/Hand : Suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 51 to 55%
4.2 Product Weight (ASTM D1475) : 1.26 to 1.46 Kg/L
4.3 Viscosity (ASTM D562) : 55 to 65 KU
4.4 Flash Point (ASTM D93 or D56) : 23°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 113 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4
Type of Coating : Aluminum Pigmented Alkyd Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Intertherm 891
SAP M/N (SAMS S/N) : 1000196402 (09-686-354)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : GTA004
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 52 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 19.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 114 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4 Topcoat – Intertherm 891 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 20 Hours 20 Hours Indefinite
30°C 8 Hours 8 Hours Indefinite
50°C 4 Hours 4 Hours Indefinite
3.7 Recommended Equipment
Airless Spray : Tip size 0.013 to 0.016 inch
Fluid pressure 3,000 psi
Conventional Spray : Tip size
Atomizing Pressure 40 to 60 psi
Trowel/Hand : Suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 46% to 50%
4.2 Product Weight (ASTM D1475) : 0.98 to 1.20 Kg/L
4.3 Viscosity (ASTM D562) : 60 to 64 KU
4.4 Flash Point (ASTM D93 or D56) : 41°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 115 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : High Gloss Enamel Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interlac 665
SAP M/N (SAMS S/N) : 1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495
(09-630-763), 1000195532 (09-630-768), 1000195571 (09-630-769),
1000195577 (09-630-770), 1000195631 (09-630-771), 1000195637 (09-630-
773), 1000195650 (09-630-785), 1000195683 (09-630-794), 1000195685 (09-
630-796), 1000195687 (09-630-798), 1000195689 (09-631-301), 1000195742
(09-631-322), 1000195745 (09-631-450), 1000195747 (09-631-455),
1000195749 (09-631-462), 1000195801 (09-631-465), 1000195803 (09-631-
590) or 1000195831 (09-631-645)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : GTA004
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 104 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 19.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 116 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6 - Interlac 665 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 20 Hours 20 Hours Indefinite
30°C 10 Hours 10 Hours Indefinite
50°C 4 Hours 4 Hours Indefinite
3.7 Recommended Equipment
Airless Spray : Tip size 0.013 to 0.016 inch
Fluid pressure 3,000 psi
Conventional Spray : Tip size
Atomizing Pressure 40 to 60 psi
Brush/Roller :
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 40 to 44%
4.2 Product Weight (ASTM D1475) : 0.90 to 1.11 Kg/L
4.3 Viscosity (ASTM D562) : 62 to 72 KU
4.4 Flash Point (ASTM D93 or D56) : 38°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 117 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-9
Type of Coating : Chlorinated Rubber: Self-Priming;
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interchlor 37
SAP M/N (SAMS S/N) : Primer 1000196351 (09-685-442), Topcoat: 1000196312 (09-685-436),
1000196317 (09-685-438), 1000196355 (09-685-448), 1000196359 (09-685-450)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : GTA007 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : Not recommended. If necessary,
10% maximum.
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 174 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 17.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 118 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-9 - Interchlor 37 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum* To Immersion
10°C 6 Hours 6 Hours None 7 Days
30°C 3 Hours 3 Hours None 5 Days
50°C 1 Hour 1 Hour None 2 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.026 inch
Fluid pressure 2,700 to 3,000 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush and roller : Touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 41 to 45%
4.2 Product Weight (ASTM D1475) : 1.3 to 1.5 Kg/L
4.3 Viscosity (ASTM D562) : 40 to 50 KU
4.4 Flash Point (ASTM D93 or D56) : 23°C (73°F)
Note: Interchlor 37 is a self-priming system, complying to Saudi Aramco S/N's 09-685-
442/436/438/448/450.
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 119 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzinc 22
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 2.08 parts by weight of QHA027
to 1 part by weight of QHA028
2.3 Thinner : GTA 803
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : 4 hours @ 25°C and 50% RH
2 hours @ 40°C and 50% RH
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 40 to 103 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 to 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 120 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Primer - Interzinc 22 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 3 Hours 6 Hours Indefinite
30°C 2 Hours 4 Hours Indefinite
50°C 3/4 Hour 4 Hours Indefinite
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
As with all Zinc Silicates, paint reservoir should be equipped with a mechanical
agitator.
Airless Spray : Tip size 0.017 to 0.020 inch
Fluid pressure not less than 1,600 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush and Roller : Not recommended
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 61 to 65%
4.2 Product Weight (ASTM D1475) : 2.42 to 2.64 Kg/L
4.3 Viscosity (ASTM D562) : 70 to 80 KU
4.4 Flash Point (ASTM D93 or D56) : 10°C
5. Additional Notes and Instructions : Curing stops when humidity goes
below 50%
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 121 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzinc 250
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1 liquid to 2.43 zinc dust
by weight
2.3 Thinner : Sweet Water
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : -
2.5 Induction Time : N/A
2.6 Pot Life : 8 hours @ 25°C
4 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 32 to 83 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 to 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 31.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 122 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Primer - Interzinc 250 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 30 Minutes 6 Hours Indefinite
30°C 12 Minutes 4 Hours Indefinite
50°C 5 Minutes 4 Hours Indefinite
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
As with all Zinc Silicates, paint reservoir should be equipped with a mechanical
agitator.
Airless Spray : Tip size 0.018 to 0.021 inch
Fluid pressure 2,300 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush and Roller : Not recommended
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 75 to 80%
4.2 Product Weight (ASTM D1475) : 3.1 to 3.3 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : N/A
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 123 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Heat-Resistant Silicone Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Intertherm 50
SAP M/N (SAMS S/N) : 1000196488 (09-687-325)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : GTA 007 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 63 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 16 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 124 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A - Intertherm 50 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 3 Hours 16 Hours Indefinite
30°C 2 Hours 14 Hours Indefinite
50°C 1 Hour 10 Hours Indefinite
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow drying.
3.7 Recommended Equipment
Airless Spray : Tip size 0.013 to 0.016 inch
Fluid pressure 2,500 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 38 to 42%
4.2 Product Weight (ASTM D1475) : 1.1 to 1.3 Kg/L
4.3 Viscosity (ASTM D562) : 49 to 59 KU
4.4 Flash Point (ASTM D93 or D56) : 23°C
5. Additional Notes, Precautions or Special Instructions : Does not require heating the
substrate between coats.
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 125 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B
Type of Coating : Heat-Resistant Silicone Primer/Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Intertherm 50
SAP M/N (SAMS S/N) : 1000196502 (09-687-330)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : GTA 007 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 63 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 16 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 126 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B - Intertherm 50 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 3 Hours 16 Hours Indefinite
30°C 2 Hours 14 Hours Indefinite
50°C 1 Hour 10 Hours Indefinite
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.013 to 0.016 inch
Fluid pressure 2,500 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 38 to 42%
4.2 Product Weight (ASTM D1475) : 1.1 to 1.3 Kg/L
4.3 Viscosity (ASTM D562) : 49 to 59 KU
4.4 Flash Point (ASTM D93 or D56) : 23°C
5. Additional Notes, Precatuions or Special Instructions : Does not require stoving
between coats
Approval Date: January 9, 2005
Replaces:
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 127 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Primer
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Intergard 291
SAMS S/N : 1000194626 (09-612-362)
(Refer to APCS-1B Primer Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 128 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Intergard 410
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960 (09-
612-375)
(Refer to APCS-1B Topcoat Data Sheet. Also, refer to APCS-12 of Saudi Aramco Engineering
Standard SAES-H-101 for application of aggregate).
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 129 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzinc 22
SAMS S/N : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 2.08 parts by weight of QHA027
to 1 part by weight of QHA028
2.3 Thinner : GTA 803
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 4 hours @ 25°C and 50% RH
2 hours @ 40°C and 50% RH
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 40 to 103 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 to 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 130 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A - Interzinc 22 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 3 Hours 6 Hours Indefinite
30°C 2 Hours 4 Hours Indefinite
50°C ¾ Hour 4 Hours Indefinite
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
As with all Zinc Silicates, paint reservoir should be equipped with a mechanical agitator.
Airless Spray : Tip size 0.017 to 0.020 inch
Fluid pressure 1,600 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 61 to 65%
4.2 Product Weight (ASTM D1475) : 2.42 to 2.62 Kg/L
4.3 Viscosity (ASTM D562) : 70 to 80 KU
4.4 Flash Point (ASTM D93 or D56) : 10°C
5. Additional Notes, Precatuions or Special Instructions : Curing stops when relative
humidity goes below 50%
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 131 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzinc 250
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1 liquid to 2.43 Zinc by weight
2.3 Thinner : Sweet Water
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : -
2.5 Induction Time : N/A
2.6 Pot Life : 8 hours @ 25°C
4 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 32 to 83 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 to 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 31.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 132 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B - Interzinc 250 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 30 Minutes 6 Hours Indefinite
30°C 12 Minutes 4 Hours Indefinite
50°C 5 Minutes 4 Hours Indefinite
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.021 inch
Fluid pressure 2,300 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 75 to 80%
4.2 Product Weight (ASTM D1475) : 3.1 to 3.3 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : N/A
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 133 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20B
Type of Coating : Fiberglass Reinforced Epoxy: Spray-Applied
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interline 985 (Matcote)
SAP M/N (SAMS S/N) : None
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 2:1 by volume
2.3 Thinner : Not recommended
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life : 30 minutes @ 25°C
15 minutes @ 40°C
3. Installation Procedure
3.1 All surfaces to be coated should be clean, dry and free from contamination. Prior to
paint application all surfaces should be assessed and treated in accordance with
ISO8504:1992.
3.2 Where necessary, remove weld spatter and where required, smooth weld seams and
sharp edges. Oil or grease should be removed in accordance with SSPC-SP1 solvent
cleaning.
3.3 All surfaces must be abrasive blast cleaned to Sa 2½ (ISO8501-1:1998) or SSPC-SP10.
A sharp angular surface profile of 75-100 microns is recommended.
3.4 Interline 985 must be applied before oxidation of the steel occurs.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 134 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20B - Interline 985 (Cont'd)
3.5 If necessary surfaces may be primed with Interline 982 applied to give a dry film
thickness of 25 microns. Provided that moisture does not settle on the surface, Interline
982 will prevent oxidation for up to 28 days.
3.6 All welds, seams, lap joints, plate edges, etc., should be caulked using Interine 983
applied by twin feed airless spray equipment.
3.7 Interline 985 should be applied using plural component airless spray equipment
(incorporating a fibreglass chopper for the laminate coat). Recommended tip sizes are
27-36 thou for laminate application and 31-36 thou for gel coat application.
3.8 Spray apply Interline 985 together with chopped International GQA015 fiberglass
roving and consolidate to a 1250-1400 microns dry film thickness laminate by rolling
with a ribbed roller. The chopped roving should be spread @ a rate of approximately
450 gm/m².
3.9 Prior to application of the gel coat, abrade the surface to remove any protruding fibre
glass strands and vacuum clean.
3.10 Using plural component airless spray equipment, apply a gel coat of Interline 985 to
give a dry film thickness of 250-500 microns according to specification. The total
system dry film thickness is 1,500 to 1,900 microns.
3.11 Dry film thickness of greater than 500 microns may be tested for pinholes or other
holidays using a suitable high voltage pulsating type holiday detector set @ 100 volts
per 25 microns dry film thickness.
3.12 Maximum Allowable Substrate Temperature : 60°C
3.13 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum* To Immersion
10°C 2 Days 2 Days 3 Days 7 Days
30°C 15 Hours 15 Hours 30 Hours 5 Days
50°C 5 Hours 5 Hours 12 Hours 4 Days
3.14 Recommended Equipment
Airless Spray: Modified plural airless spray incorporating a fiberglass chopper.
Conventional Spray: Not applicable
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 135 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20B - Interline 985 (Cont'd)
3.15 Material summary:
Holding Primer (optional) Interline 982
Caulk (putty) Interline 983
Laminate (Resin) Interline 985 incorporating
Fiberglass International GQA015
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 98 to 100%
4.2 Product Weight (ASTM D1475) : 1.1 to 1.3 Kg/L
4.3 Viscosity (ASTM D562) : KU
4.4 Flash Point (ASTM D93 or D56) : 101°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 136 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A
Type of Coating : Epoxy Primer: Damp Tolerant
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interseal 414
SAP M/N (SAMS S/N) : 1000194560 (09-612-352) or 1000195239 (09-612-459)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4 parts EPA414 to 1 part
EPA415 by volume
2.3 Thinner : GTA220
SAP M/N (SAMS S/N) : 1000198471 (09-738-300)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 8 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 91 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 22 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 137 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Primer - Interseal 414 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum*
10°C 12 Hours 10 Hours 90 Days
30°C 6 Hours 6 Hours 45 Days
50°C 4 Hours 2 Hours 9 Days
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.021 inch
Fluid Pressure 2,500 psi minimum
Conventional Spray : Not recommended
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 54 to 56%
4.2 Product Weight (ASTM D1475) : 1.4 to 1.6 Kg/L
4.3 Viscosity (ASTM D562) : 125 to 150 KU
4.4 Flash Point (ASTM D93 or D56) : 23°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 138 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A
Type of Coating : Epoxy Topcoat: Damp Tolerant
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzone 954
SAP M/N (SAMS S/N) : 1000194565 (09-612-357), 1000194568 (09-612-358), 1000194590 (09-
612-359), 1000195273 (09-612-462), 1000195277 (09-612-465) or
1000195314 (09-612-467)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4 parts base: 1 part
hardener by volume
2.3 Thinner : GTA220
SAP M/N (SAMS S/N) : 1000198471 (09-738-300)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 1-½ hours @ 25°C
45 minutes @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 352 micrometers
3.3 Typical Dry Film Thickness Per Coat : 300 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 34 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 139 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Topcoat - Interzone 954 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 1 Day 14 Days
30°C 8 Hours 8 Hours 7 Days
50°C 3 Hours 3 Hours 5 Day
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.026 inch
Fluid Pressure 2,500 psi minimum
Conventional Spray : Not recommended
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 83 to 87%
4.2 Product Weight (ASTM D1475) : 1.6 to 1.8 Kg/L
4.3 Viscosity (ASTM D562) : 115 to 125 KU
4.4 Flash Point (ASTM D93 or D56) : 30°C
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 140 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22B
Type of Coating : Epoxy: One Coat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interzone 954
SAP M/N (SAMS S/N) : 1000647350 (09-000-461), 1000647351 (09-000-462), 1000647352
(09-000-463), 1000647353 (09-000-464), 1000669337 (09-000-489), 1000669338
(09-000-490), 1000669339 (09-000-491), 1000669590 (09-000-492),
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4 parts base: 1 part
hardener by volume
2.3 Thinner : GTA220
SAP M/N (SAMS S/N) : 1000647354 (09-000-465)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 1-½ hours @ 25°C
45 minutes @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 470 micrometers
3.3 Typical Dry Film Thickness Per Coat : 400 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 34 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 141 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22B - Interzone 954 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 1 Day 14 Days
30°C 8 Hours 8 Hours 7 Days
50°C 3 Hours 3 Hours 5 Day
3.7 Recommended Equipment
Airless Spray : Pump Ratio 45:1 minimum
Tip size 0.021 to 0.026 inch
Fluid Pressure 2,500 psi minimum
Conventional Spray : Not recommended
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 83 to 87%
4.2 Product Weight (ASTM D1475) : 1.6 to 1.8 Kg/L
4.3 Viscosity (ASTM D562) : 115 to 125 KU
4.4 Flash Point (ASTM D93 or D56) : 30°C
Approval Date: January 9, 2005
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 142 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26
Type of Coating : Epoxy Mastic Coating (Self Priming)
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interseal 738
SAP M/N (SAMS S/N) : 1000194381 (09-612-330), 1000194386 (09-612-331), 1000194401
(09-612-332), 1000194407 (09-612-333), 1000194420 (09-612-334),
1000194427 (09-612-335) or 1000194471 (09-612-336)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 6.4 parts of EY series with
1 part EYA001 by volume
2.3 Thinner : GTA220
SAP M/N (SAMS S/N) : 1000198487 (09-738-420)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : Nil
2.6 Pot Life : 4 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 313 micrometers
3.3 Typical Dry Film Thickness Per Coat : 250 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 32 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 143 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26 – Interseal 738 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 3 Days 4 Days 14 Days
30°C 18 Hours 20 Hours 5 Days
50°C 12 Hours 12 Hours 2 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.026 inch
Fluid Pressure 2,800 psi minimum
Conventional Spray : Not recommended
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 78 to 82%
4.2 Product Weight (ASTM D1475) : 1.3 to 1.5 Kg/L depending on color
4.3 Viscosity (ASTM D562) : 114 to 124 KU
4.4 Flash Point (ASTM D93 or D56) : 23°C
5. Additional Notes, Precautions or Special Instructions
To ensure adequate curing, do not apply when steel temperature falls below 10°C.
When overocating aged systems, be sure that all loose and flaking coatings are first removed.
Approval Date: January 9, 2005
Replaces: April 6, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 144 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-26T Topcoat
Type of Coating : Polyurethane Topcoat
Manufacturer : International Paint Saudi Arabia Ltd.
Product Name : Interthane 990
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-
612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
(Refer to APCS-26 data sheet for the primer and to polyurethane of APCS-1D/E/F data sheet for the
topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 145 of 398
6 Jotun – Approved Materials
APCS-1A Resist 78 Inorganic Zinc-Primer: Solvent-Based
Resist 5 WF Inorganic Zinc Primer: Water-Based
Penguard Express Epoxy Intermediate Coat
Penguard FC Epoxy Topcoat: Red/Gray/Yellow
APCS-1B Penguard Express ZP Epoxy Primer
Penguard Express Epoxy Intermediate Coat
Penguard FC Epoxy Topcoat: Red/Gray/Yellow
APCS-1C Barrier 77 Zinc-Rich Epoxy Primer: Gray
Penguard Express Epoxy Intermediate Coat
Penguard FC Epoxy Topcoat: Red/Gray/Yellow
APCS-1D (Use APCS-1A as primer and intermediate coat.)
Hardtop XP Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1E (Use APCS-1B as primer and intermediate coat.)
Hardtop XP Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1F (Use APCS-1C as primer and intermediate coat.)
Hardtop XP Polyurethane Topcoat: Yellow/White
Gray/Green/Rad
APCS-2A Tankguard A.R. Phenolic Epoxy : Grey/Red
APCS-2B Tankguard 412 Amine Aduct Solvent-Free Epoxy
APCS-2C Tankguard A.R. Phenolic Epoxy : Grey/Red
APCS-2D Tankguard Storage Epoxy : Yellow/White
APCS-2E Tankguard 412 Amine Aduct Solvent-Free Epoxy
APCS-2G Chemflake Special Vinyl Ester: Flake Glass Reinforced
APCS-4 Pilot Primer Zinc Phosphate Primer
Bengalac Silver Aluminium Alkyd Topcoat: Aluminum Color
APCS-6 Pilot Primer Zinc Phosphate Primer
Pilot II Alkyd Topcoat: Various Colors
APCS-11A Resist 78 Inorganic Zinc-Primer: Solvent-Based
Resist 5 WF Inorganic Zinc Primer: Water-Based
Solvalitt Al Heat-Resistant Topcoat: Aluminum
APCS-11B Solvalitt Al Heat Resistant System: (Self-Priming)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 146 of 398
APCS-12 Penguard Express ZP Epoxy Primer
Penguard Express Epoxy Intermediate Coat
Penguard FC Epoxy Topcoat: Red/Gray/Yellow
APCS-17A Resist 78 Inorganic Zinc-Primer: Solvent-Based
APCS-17B Resist 5 WF Inorganic Zinc Primer: Water Based
APCS-19C Baltoflake Glass Flake Reinforced Polyester
APCS-20A Tankguard Storage Phenolic Epoxy
Chemtech GM Clear H.S. Epoxy
APCS-22A Jotamastic 80 Epoxy Primer: Damp-Tolerant
Penguard FC Topcoat; Gray/ Yellow/Black
APCS-26 Jotamastic 80 Epoxy Mastic: Aluminum/White/Orange/
Yellow/Gray/Black
APCS-26T (Use APCS-26 as primer and Hardtop XP in APCS-1D as topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 147 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Resist 78
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 9 L Liquid : 18.5 Zinc Dust
2.3 Thinner : Thinner No. 25 (Slow)
Thinner No. 4 (Fast)
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : 0 to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : 8 hours @ 23°C
4-6 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 107 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 28 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 148 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Resist 78 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 45 Minutes 13 Hours None
23°C 30 Minutes 4 Hours None
40°C 25 Minutes 1.5 Hours None
Curing Time to be verified by MEK test according to ASTM D4752-87.
During and after application, the Relative humidity shall be minimum 50%.
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.023 inch
Fluid Pressure 1,400 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush and Roller : For small areas and stripe coating only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 70 to 74%
4.2 Product Weight (ASTM D1475) : 2.4 Kg/L
4.3 Viscosity (ASTM D562) : 85 to 90 KU
4.4 Flash Point (ASTM D93 or D56) : 14°C
4.5 VOC : 470 Gram/Ltr
4.6 Metallic Zinc Content (AS1580.504.1) : 80 % ( in Dry Film)
Approval Date: May 14, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 149 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Resist 5 WF
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 7.3 Kg Liquid: 26.0 Kg Zinc Dust
(Liquid 6.25 L : 3.75 L Zinc Dust)
2.3 Thinner : Sweet Water
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : Not required
2.5 Induction Time : N/A
2.6 Pot Life : 5 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 100 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 30.0 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 150 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Resist 5 WF (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum Full Cured
10°C ⅔ Hour 1 Day None 10 Days
30°C ½ Hour 6 Hours None 5 Days
50°C ¼ Hour 4 Hours None 3 Days
3.7 Recommended Equipment
Airless Spray : Viva High Pressure pump R-F-W-
G-34020
Conventional Spray : Tip Size
Atomizing Pressure
Brush and Roller : For small areas and touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 73 to 77%
4.2 Product Weight (ASTM D1475) : 2.4 Kg/L
4.3 Viscosity (ASTM D562) : 85 to 90 KU
4.4 Flash Point (ASTM D93 or D56) : Non-Flammable
4.5 Metallic Zinc Conten ( AS1580.504.1) : 88 % ( in Dry Film)
Approval Date: May 14, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 151 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Intermediate Coat
Type of Coating : Polyamide cured Epoxy-Intermediate
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Penguard Express
SAP M/N (SAMS S/N) : 1000194629 (09-612-364)
1. Storage
1.1 Shelf life, sheltered storage @ 23°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base: Hardener by Volume) : 4:1
2.3 Thinner : Thinner No. 17
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : 10 minutes @ 23°C
2.6 Pot Life : 2 hours @ 23°C
Hours at 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 170 micrometers
3.3 Typical Dry Film Thickness Per Coat : 125 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 29.5 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 152 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Intermediate - Penguard Express (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 6 Hours 4 Hours 6 Days
23°C 3 Hours 2 Hours 3 Days
40°C 2 Hours 1 Hours 1 Day
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.027 inch
Fluid Pressure 2100 psi
Conventional Spray : Not recommended
Brush and Roller : For small areas and touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 74% (+/-2)
4.2 Product Weight (ASTM D1475) : 1.52 Kg/L
4.3 Viscosity (ISO-2884) : 800 CP
4.4 Flash Point (ASTM D93 or D56) : 32°C
4.5 VOC (UK-PG6-23-(97)App3) : 230 Gram/Ltr
Approval Date: May 19, 2008
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 153 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat
Type of Coating : Polyamide cured Epoxy-Topcoat
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Penguard FC
SAP M/N (SAMS S/N) : 1000194797 (09-612-369) or 1000194960 (09-612-375)
1. Storage
1.1 Shelf life, sheltered storage @ 23°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base: Hardener by Volume) : 4:1
2.3 Thinner : Thinner No. 17
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements : According to temp.
2.5 Induction Time : 15 minutes @ 23°C
2.6 Pot Life : 2 hours @ 23°C (reduce at
higher temp.)
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 160 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 154 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat - Penguard FC (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 15 Hours 15 Hours 4 Days
23°C 7.5 Hours 7.5 Hours 4 Days
40°C 2 Hours 4 Hours 1 Day
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.027 inch
Fluid Pressure 2,100 psi
Conventional Spray : Not recommended
Brush and Roller : For small areas and touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 62% (+/-2)
4.2 Product Weight (ASTM D1475) : 1.4 Kg/L
4.3 Viscosity (ASTM D562) : 82 to 89 KU !!!!
4.4 Flash Point (ASTM D93 or D56) : 28°C
4.5 VOC (UK-PG6-23-(97)App3) : 310 g/L
Approval Date: February 12, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 155 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B
Type of Coating : Epoxy Primer
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Penguard Express ZP
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base : hardener) by volume : 4:1
2.3 Thinner : Thinner No. 17
SAP M/N (SAMS S/N) : 1000198455 (09-738-280)
2.4 Thinning Requirements : 0 to 5% by volume
2.5 Induction Time : 10 minutes
2.6 Pot Life : 2 hours @ 25°C
hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 170 micrometers
3.3 Typical Dry Film Thickness Per Coat : 125 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 29.5 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 156 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B Primer - Penguard Express ZP (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 6 Hours 4 Hours Unknown Days
30°C 3 Hours 2 Hours Unknown Days
50°C 2 Hours 1 Hour Unknown Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.027 inch
Fluid Pressure 2,100 psi
Conventional Spray : Not recommended
Brush and Roller : For small areas and touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 72 to 76%
4.2 Product Weight (ASTM D1475) : 1.53 Kg/L
4.3 Viscosity (ASTM D562) : KU
4.4 Flash Point (ASTM D93 or D56) : 32°C
4.5 VOC (UK-PG6-23-(97)App3) : 230 Gram/Ltr
Approval Date: May 14, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 157 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C
Type of Coating : Zinc-Rich Epoxy Primer
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Barrier 77
SAP M/N (SAMS S/N) : 1000195348 (09-612-580) or 1000195361 (09-612-590)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base: hardener) by volume : 3:1
2.3 Thinner : Thinner No. 17
SAP M/N (SAMS S/N) : 1000198449 (09-738-240)
2.4 Thinning Requirements : 0 to 5% by volume
2.5 Induction Time : ½ hour
2.6 Pot Life : 1 day @ 25°C
More than 12 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 95 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 21.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 158 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C Primer - Barrier 77 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 2 Hours 2 Hours 6 Months
30°C 1.5 Hours 1.5 Hours 4 Months
50°C 2/3 Hours 2/3 Hours 2 Months
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid Pressure 2,100 psi
Conventional Spray : Not recommended
Brush and Roller : For small areas and touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 51 to 55%
4.2 Product Weight (ASTM D1475) : 2.5 to 2.6 Kg/L
4.3 Viscosity (ASTM D562) : 73 to 77 KU
4.4 Flash Point (ASTM D93 or D56) : 27 °C
4.5 VOC : 400 g/L
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 159 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat
Type of Coating : Polyurethane Enamel Topcoat
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Hardtop XP
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-612-
367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base: hardener) by volume : 10:1
2.3 Thinner : Thinner No. 10
SAP M/N (SAMS S/N) : 1000198479 (09-738-345)
2.4 Thinning Requirements (Airless Spray) : 0 to 10% by volume
2.5 Induction Time : NA
2.6 Pot Life (mixture) : 1.5 hours @ 25°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 95 micrometers
3.3 Typical Dry Film Thickness Per Coat : 60 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25.28 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 160 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F – Hardtop XP (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 14 Days 14 Hours 45 Days
30°C 7 Hours 7 Hours 30 Days
50°C 4 Hours 4 Hours 10 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.011 to 0.017 inch
Fluid Pressure 2,100 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush & Roller : For touch-up and small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 61 to 65%
4.2 Product Weight (ASTM D1475) : 1.43 Kg/L
4.3 Viscosity (ASTM D562) :
4.4 Flash Point (ASTM D93 or D56) : 30 °C
4.5 VOC : 360 g/L
Note: For APCS-1D, use APCS-1A as primer and intermediate coat. For APCS-1E, use APCS-1B as
primer and intermediate coat. For APCS-1F, use APCS-1C as primer and intermediate coat.
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 161 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2A
Type of Coating : Phenolic Epoxy
Manufacturer : Jotun Saudia Co Ltd (Saudi Arabia)
Product Name : Tankguard A.R.
SAP M/N (SAMS S/N) : 1000195232 (09-612-425) or 1000195235 (09-612-453)
1. Storage
1.1 Shelf life, sheltered storage at 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 6.5 : 1 by volume,
base: hardener
2.3 Thinner : Jotun # 23
SAP M/N (SAMS S/N) : 1000198377 (09-738-140)
2.4 Thinning Requirements : Up to 2%
2.5 Induction Time : 10 mins. at 23°C
2.6 Pot Life : 2 hours at 23°C
1 hour at 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 220 micrometers
3.3 Typical Dry Film Thickness Per Coat : 150 micrometers
3.4 Theoretical Coverage at 25 Micrometers : 27.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 162 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2A - Jotun Saudia Co Ltd Tankguard A.R. (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
5°C
10°C
15°C 20 Hours 20 Hours 30 Days 14 Days
20°C 16 Hours 25 Days 7 Days
25°C 13 Hours 20 Days 5.5 Days
30°C 5 Hours 12 Hours 15 Days 3.5 Days
35°C 10 Hours 10 Days 3.25 Days
40°C 8 Hours 8.5 Days 3 Days
45°C 6 Hours 7 Days 2.5 Days
50°C 1 Hour 4 Hours 5 Days 2 Days
55°C 2.5 Hours 3 Days 1.5 Days
60°C 2 Hours 2 Day 1 Days
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.027 inch
Fluid pressure 2,100 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 68 ± 2%
4.2 Product Weight (ASTM D1475) : 1.63 to 1.67 Kg/L
4.3 Viscosity (ASTM D562) :
4.4 Flash Point (ASTM D93 OR D56) : 29°C ± 2
Approval Date: May 19, 2008
Replaces: May 18, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 163 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2B
Type of Coating : Amine Aduct Solvent Free Epoxy
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Tankguard 412
SAP M/N (SAMS S/N) : 1000195317 (09-612-518) or 1000195341 (09-612-546)
1. Storage
1.1 Shelf life, sheltered storage @ 27°C maximum : 1 year
2. Mixing
2.1 No. of Components : Two
2.2 Mixing Ratio (base: hardener) by volume : 2:1
2.3 Thinner : None
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life : 1 hr. at 23 °C
Notes :
Temp. of Comp A and B is recommended to be below 23 Deg C, when the paint is mixed due to
the short pot life.
Flush the application eqipment with Thinner No# 28 prior to application. Use Jotun Thinner No
# 17 for cleaning the equipment after the application.
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 150 micrometers
3.3 Typical Dry Film Thickness Per Coat : 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
3.5 Minimum Number of Coats (Spray Application) : Three
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 164 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2E - Tankguard 412
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water
10°C 30 Hours 30 Hours 96 Hours 15 Days
30°C 12 Hour 12 Hour 48 Hours 7 Days
50°C 4 Hour 4 Hours 18 Hours 4 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.026 inch
Fluid pressure 3,600-5000 psi
Conventional Spray : N/A
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.5 Kg/L
4.3 Viscosity (ISO-2884) : 2000-2500 CPS
4.4 Flash Point (ASTM D93 OR D56) : 100°C
4.5 VOC (UK-PG6-23-(97)App3) : 40 Gram/Ltr
Approval Date: May 19, 2008
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 165 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2C
Type of Coating : Phenolic Epoxy
Manufacturer : Jotun Saudia Co Ltd (Saudi Arabia)
Product Name : Tankguard A.R.
SAP M/N (SAMS S/N) : 1000194295 (09-612-312), 1000194298 (09-612-313) or 1000194352
(09-612-314)
1. Storage
1.1 Shelf life, sheltered storage at 35° C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base : Hardener) by Volume : 6.5 : 1
2.3 Thinner : Jotun # 23
SAP M/N (SAMS S/N) : 1000198483 (09-738-380)
2.4 Thinning Requirements : Up to 2%
2.5 Induction Time : 10 mins. at 23°C
2.6 Pot Life : 2 hours at 23°C
1 hour at 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 220 micrometers
3.3 Typical Dry Film Thickness Per Coat : 150 micrometers
3.4 Theoretical Coverage at 25 Micrometers : 27.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 166 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2C - Jotun Saudia Co Ltd Tankguard A.R. (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
5°C
10°C
15°C 20 Hours 20 Hours 30 Days 14 Days
20°C 16 Hours 25 Days 7 Days
25°C 13 Hours 20 Days 5.5 Days
30°C 5 Hours 12 Hours 15 Days 3.5 Days
35°C 10 Hours 10 Days 3.25 Days
40°C 8 Hours 8.5 Days 3 Days
45°C 6 Hours 7 Days 2.5 Days
50°C 1 Hour 4 Hours 5 Days 2 Days
55°C 2.5 Hours 3 Days 1.5 Days
60°C 2 Hours 2 Day 1 Days
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.027 inch
Fluid pressure 2,100 psi
Conventional Spray : Tip size
Atomizing Pressure
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 68 ± 2%
4.2 Product Weight (ASTM D1475) : 1.63 to 1.67 Kg/L
4.3 Viscosity (ASTM D562) : 80-100 CPS
4.4 Flash Point (ASTM D93 OR D56) : 29°C ± 2
Approval Date: May 19, 2008
Replaces: May 18, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 167 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2D
Type of Coating : Modified Amine Cured Epoxy
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Tankguard Storage
SAP M/N (SAMS S/N) : Primer 1000194354 (09-612-316); Topcoat 1000194357 (09-612-317)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base: hardener) by volume : 6.5:1
2.3 Thinner : Thinner No. 23
SAP M/N (SAMS S/N) : 1000198458 (09-738-290)
2.4 Thinning Requirements (Airless Spray) :
2.5 Induction Time : 20 minutes
2.6 Pot Life (mixture) : 4 hours @ 25°C
hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 200 micrometers
3.3 Typical Dry Film Thickness Per Coat : 125 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 168 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2D – Tankguard Storage (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum Fully Cured
10°C 20 Hrs 20 Hrs 8 Days ?? 30 Days
30°C 10 Hours 10 Hrs 2 Days ?? 30 Days
50°C 4 Hours 6 Hours 1 Days ?? 30 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.027 inch
Fluid Pressure 2,100 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush & Roller : For touch-up and small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 61 to 65%
4.2 Product Weight (ASTM D1475) : 1.3 to 1.4 Kg/L
4.3 Viscosity (ASTM D562) : KU
4.4 Flash Point (ASTM D93 or D56) : 28 °C
4.3 Viscosity (ASTM D562) : KU
4.4 Flash Point (ASTM D93 or D56) : 28 °C
4.5 VOC : 560 g/L
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 169 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2E
Type of Coating : Amine Aduct Solvent Free Epoxy
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Tankguard 412
SAP M/N (SAMS S/N) : 1000608685 (09-000-447), 1000608684 (09-000-446) or 1000608683
(09-000-445)
1. Storage
1.1 Shelf life, sheltered storage @ 27°C maximum : 1 year
2. Mixing
2.1 No. of Components : Two
2.2 Mixing Ratio (base: hardener) by volume : 2:1
2.3 Thinner : None
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life : 1 hr. at 23 °C
Notes :
Temp. of Comp A and B is recommended to be below 23 Deg C, when the paint is mixed due to
the short pot life.
Flush the application eqipment with Thinner No# 28 prior to application. Use Jotun Thinner No
# 17 for cleaning the equipment after the application.
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 200 micrometers
3.3 Typical Dry Film Thickness Per Coat : 200 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
3.5 Minimum Number of Coats (Spray Application) : Two
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 170 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2E - Tankguard 412
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water
10°C 30 Hours 30 Hours 96 Hours 15 Days
30°C 12 Hour 12 Hour 48 Hours 7 Days
50°C 4 Hour 4 Hours 18 Hours 4 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 to 0.026 inch
Fluid pressure 3,600-5000 psi
Conventional Spray : N/A
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.5 Kg/L
4.3 Viscosity (ISO-2884) : 2000-2500 CPS
4.4 Flash Point (ASTM D93 OR D56) : 100°C
4.5 VOC (UK-PG6-23-(97)App3) : 40 Gram/Ltr
Approval Date: May 19, 2008
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 171 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2G
Type of Coating : Vinyl Ester Coating: One-coat; Spray-Applied;
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Chemflake Special
SAP M/N (SAMS S/N) : Base plus catalyst in one box 1000709300 (09-000-502); Retarder
1000709303 (09-000-505)
1. Storage
1.1 Shelf life, sheltered storage @ 27°C maximum : 6 months
2. Mixing
2.1 No. of Components : *Two
2.2 Mixing Ratio : Depending on the temperature.
Refer to manufacturer data sheet
under the section “Application
Data”.
2.3 Thinner : Styrene Monomer Inhibited
SAP M/N (SAMS S/N) : 1000709301 (09-000-503-00)
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life : 45 min. at 23 °C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 780 micrometers
3.3 Typical Dry Film Thickness Per Coat : 750 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 38.4 M²/L
3.5 Minimum Number of Coats (Spray Application) : Two
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 172 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-2G - Polyglass VEF (Cont.)
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water
10°C 6 Hours 5 Hours 36 Hours 8 ½ Days
30°C 4 Hour 2 Hour 24 Hours 4 ¼ Days
50°C 2 Hour 2 Hours 12 Hours 1 ½ Days
3.7 Recommended Equipment
Airless Spray (Plural Component is recommended):
Pump Ratio: 45:1 minimum
Tip Size: 0.034 to o.045 inch
Fluid Pressure: 3,000 psi
Paint Hose: 3/8 inch
Conventional Spray: Not recommended
Brush: For touch-up and small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 94 to 98 %
4.2 Product Weight (ASTM D1475) : 1.25 Kg/L
4.3 Viscosity (ASTM D562) : 40 to 600 cpd
4.4 Flash Point (ASTM D93 or D56) : 34°C (mixture)
4.5 VOC : 36 g/L
Notes:
a) For tool cleaning, use Styrene Monomer Inhibited specified available in SAP M/N (SAMS S/N) 1000709301 (09-000-503-00).
b) The recommended spray equipment is Specialized "Coverdale Covercat 352 Hydrocat or 55:1 Graco.
c) The mixture basically consists of the base and catalyst. During summer, a retarder (third component) is required to slow down curing. Contact the coating manufacturer on tel. (03) 847-3090 regarding the mixture sequence.
Approval Date: May 19, 2008
Replaces: October 22, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 173 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4
Type of Coating : Alkyd-Based Primer
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Pilot Primer
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Thinner No. 2
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : 0 to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 75 micrometers
3.3 Typical Dry Film Thickness Per Coat : 40 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 20.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 174 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4 Primer – Pilot Primer (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 22 Hours 2 Days 28 Days
30°C 16 Hours 16 Hours 14 Days
50°C 10 Hours 10 Hours 7 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid Pressure 2,100 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush and Roller : Suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 50 to 54%
4.2 Product Weight (ASTM D1475) : 1.2 to 1.4 Kg/L
4.3 Viscosity (ASTM D562) : 90 to 94 KU
4.4 Flash Point (ASTM D93 or D56) : 36°C
4.5 VOC : 504 g /L
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 175 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4
Type of Coating : Alkyd-Based Topcoat: Aluminum Color
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Bengalac Silver Aluminium
SAP M/N (SAMS S/N) : 1000196402 (09-686-354)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Thinner No. 2
SAMS S/N : 1000198474 (09-738-340)
2.4 Thinning Requirements (Airless Spray) : 0 to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 65 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 12 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 176 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4 Topcoat Bengalac Silver Aluminium (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 20 Hours 20 Hours 28 Days
30°C 8 Hours 8 Hours 14 Days
50°C 2 Hour 2 Hours 7 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.013 to 0.018 inch
Fluid Pressure 2,100 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush and Roller : Suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 31 to 35%
4.2 Product Weight (ASTM D1475) : 0.90 to 1.00 Kg/L
4.3 Viscosity (ASTM D562) : 55 to 65 KU
4.4 Flash Point (ASTM D93 or D56) : 36 °C
4.5 VOC : 476 Gms /Ltr
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 177 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : Alkyd-Based Primer
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Pilot Primer
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
(See APCS-4 Primer's Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 178 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : High Gloss Enamel Topcoat
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Pilot II
SAP M/N (SAMS S/N) : 1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495 (09-630-763),
1000195532 (09-630-768), 1000195571 (09-630-769), 1000195577 (09-630-770),
1000195631 (09-630-771), 1000195637 (09-630-773), 1000195650 (09-630-785),
1000195683 (09-630-794), 1000195685 (09-630-796), 1000195687 (09-630-798),
1000195689 (09-631-301), 1000195742 (09-631-322), 1000195745 (09-631-450),
1000195747 (09-631-455), 1000195749 (09-631-462), 1000195801 (09-631-465),
1000195803 (09-631-590) or 1000195831 (09-631-645)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Thinner No. 2
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements (Airless Spray) : 0 to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 85 micrometers
3.3 Typical Dry Film Thickness Per Coat : 40 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 19.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 179 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6 Topcoat - Pilot II (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 14 Hours 1 Day 28 Days
30°C 16 Hours 16 Hours 14 Days
50°C 12 Hour 12 Hours 7 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid Pressure 2,100 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush and Roller : Suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 46 to 50%
4.2 Product Weight (ASTM D1475) : 1.00 to 1.15 Kg/L
4.3 Viscosity (ASTM D562) : 90 to 94 KU
4.4 Flash Point (ASTM D93 or D56) : 36°C
4.5 VOC : 410 g/L
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 180 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Resist 78
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
(Please see APCS-1A Primer Data Sheet
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 181 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Resist 5 WF
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
(Please see APCS-1A Primer Data Sheet
Approval Date: January 31, 2005
Replaces: August 14, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 182 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Silicone Topcoat
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Solvalitt
SAP M/N (SAMS S/N) : 1000196488 (09-687-325)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Thinner No. 7
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements (Airless Spray) : 0 to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 70 micrometers (alum.)
60 micrometers (others)
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 14 M²/L (alum.)
Dry Film Thickness 16.8 M²/L (others)
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 183 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Topcoat - Solvalitt (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 5 Hours 5 Hours N/A
30°C 4 Hours 4 Hours N/A
50°C 3 Hours 3 Hour N/A
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid Pressure 2,100 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush and Roller : For small areas and touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 33 to 37% (alum.)
40 to 44% (others)
4.2 Product Weight (ASTM D1475) : 0.9 to 1.2 Kg/L (alum.)
1.1 to 1.3 Kg/L (others)
4.3 Viscosity (ASTM D562) : 100 to 150 cps (alum.)
220 to 300 cps (others)
4.4 Flash Point (ASTM D93 or D56) : 23°C
4.5 VOC : 500 g/L
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 184 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B (Self-Priming) / Topcoat
Type of Coating : Silicone Heat –Resistant
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Solvalitt
SAP M/N (SAMS S/N) : 1000196502 (09-687-325) Aluminium
(The same as APCS-11A Topcoat Data Sheet except that it is applied in two coats and double the
thickness.)
Approval Date: February 13 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 185 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Primer
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Penguard Express ZP
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
(Refer to APCS-1B Primer Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 186 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Intermediate Coat
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Penguard Express
SAP M/N (SAMS S/N) : 1000194629 (09-612-364)
(Refer to APCS-1B Intermediate Coat Data Sheet. Also, refer to APCS-12 of Saudi Aramco
Engineering Standard SAES-H-101 for application of aggregate).
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 187 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Topcoat
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Penguard FC
SAP M/N (SAMS S/N) : 1000194797 (09-612-369) or 1000194960 (09-612-375)
(Refer to APCS-1B Top Coat Data Sheet. Also, refer to APCS-12 of Saudi Aramco Engineering
Standard SAES-H-101 for application of aggregate).
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 188 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Resist 78
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
(See APCS-11A Primer's Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 189 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Resist 5 WF
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
(See APCS-11A Primer's Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 190 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-19C
Type of Coating : Glass Flake Reinforced Polyester
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Baltoflake
SAP M/N (SAMS S/N) : Base plus catalyst in one box; 1000788245 (09-000-532) or 1000788246
(09-000-5332)
1. Storage
1.1 Shelf life, sheltered storage @ 23°C maximum : 6 months
2. Mixing
2.1 No. of Components : Multi
2.2 Mixing Ratio : Depending on the temperature.
Refer to manufacturer data sheet
under the section “Application
Data”.
2.3 Thinner : Styrene ( if needed max 5%)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life : 45-55 min. at 23 °C( reduce at
higher temp.)
2.7 Cleaner : Thinner No# 17
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 780 micrometers
3.3 Typical Dry Film Thickness Per Coat : 750 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 38.4 M²/L
3.5 Minimum Number of Coats (Spray Application) : Two
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 191 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-19C - Baltoflake (Cont.)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum Fully Cured
10°C 5 Hours 5 Hours 20 Hours 4 Days
23°C 2 Hours 2 Hours 12 Hours 2 Days
40°C 1 Hours 1 Hours 6 Hours 1 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.027 to 0.043 inch
Fluid Pressure 2,100-4,000 psi
Conventional Spray : N/A
Brush : For touch-up and small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 96% ( +/-2)
4.2 Product Weight (ASTM D1475) : 1.25 Kg/L
4.3 Viscosity (ASTM D562) : 70 KU !!!!
4.4 Flash Point (ASTM D93 or D56) : 34°C
4.5 VOC : 75 g/L
Approval Date: May 19, 2008
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 192 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A
Type of Coating : High Solid Epoxy
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Chemtech GM Clear
SAP M/N (SAMS S/N) : None
1. Storage
1.1 Shelf life, sheltered storage @ 23°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 2.5 : 1 by Volume
2.3 Thinner / Cleaner : Thinner No. 17
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements (Airless Spray) : According to temp.
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : 50-60 Minutes @ 23°C
Reduce at higher temp.
3. Application Procedure
3.1 Surface Preparation
Prior to start the blasting work, all surface irregularities such as weld spatters, weld fluxes shall be
removed. All surfaces shall be clean, dry and free from contamination. The surface shall be assessed
and treated in accordance with ISO 8504.
Any sharp edges, weld splatter, etc. should be removed or rounded.
3.2 Bare steel
Cleanliness: Blast cleaning to min. Sa 2 ½ (ISO 8501 1:2007). Roughness: use suitable abrasives to
achieve Grade Coarse G (75 - 130 microns, Ry5) (ISO 8503-2).
Blasted surfaces shall be vacuum cleaned or air blow clean to avoid contamination of the blasted
surface.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 193 of 398
3.3 Coated surfaces
Primer application: Approved on top of thin coat (40 μm) of clean, undamaged recommended Epoxy
Primer (Tankguard HB, Penguard Primer or Penguard Storage).
3.4 Other surfaces
The coating may be used on other substrates. Please contact your local Jotun office for more
information.
4. Application
4.1 Maximum Allowable Substrate Temperature : 50°C
4.2 Typical Wet Film Thickness Per Coat : 1650 micrometers
4.3 Typical Dry Film Thickness Per Coat : 1650 micrometers
4.4 Theoretical Coverage @ 25 Micrometers : Not Applicable
Dry Film Thickness
4.5 Minimum Number of Coats : 2
4.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum Fully Cured
10°C 26 Hours 26 Hours None 14 Days
23°C 12 Hours 12 Hours None 7 Days
40°C 7 Hours 7 Hours None 3 Days
4.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : N/A
Roller : Suitable
5. Technical Properties
5.1 Volume Solids (ASTM D2697) : 100 %
5.2 Product Weight (ASTM D1475) : 1.05 Kg/L
5.3 Viscosity Comp A (ISO-2884) : 2000-2750 CPS
5.4 Viscosity Comp B (ISO-2884) : 250-350 CPS
5.5 Flash Point (ASTM D93 or D56) : Non Flammeable
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 194 of 398
5.6 VOC : None
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A - Chemtech GM Clear (Cont'd)
Related Materials:
1. Fiberglass Mat: Vetrotex M 450 GM2 x 125 (Saint - Gobin - Vetrotex) - Approximate weight / roll -
65 kg
Equivalents: Aura Mat M 450 GM2 x 125 approximate weight / roll – 35 kg
2 - Surface Tissue: Tissue Mat 30 GM2 x 1 M
3 – Holding Primer: Tankguard HB dilluted 25% or approved equivalent.
4 - Every coat of Chemtech Clear need to have Glass Fibre Matt 450 Gms/ Sq. Mtr.
5 – Caulking
5.1 – To be done using Chemtech GM as epoxy filler by adding Component C (Aerosil 300) mixing
with component A and B at site.
Approval Date: November 22, 2008
Replaces: None
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 195 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Primer
Type of Coating : Epoxy: Damp-Tolerant
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Jotamastic 80
SAP M/N (SAMS S/N) : 1000194560 (09-612-352) or 1000195239 (09-612-459)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 7:1 by volume (colors)
2.3 Thinner : Thinner No. 17
SAP M/N (SAMS S/N) : 1000198471 (09-738-300)
2.4 Thinning Requirements (Airless Spray) : 0 to 10% by volume
2.5 Induction Time : 10 minutes
2.6 Pot Life (mixture) : 2 hours @ 25°C
1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 125 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 32 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 196 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Primer - Jotamastic 80 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 1 Day 60 Days
30°C 7 Hours 7 Hours 45 Days
50°C 3 Hours 3 Hours 28 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 to 0.023 inch
Fluid Pressure 2,100 psi
Conventional Spray : Not recommended
Brush and Roller : For small areas and touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 78 to 82%
4.2 Product Weight (ASTM D1475) : 1.50 Kg/L
4.3 Viscosity (ASTM D562) : 120 to 126 KU
4.4 Flash Point (ASTM D93 or D56) : 35°C
4.5 VOC : 145 g/L
Approval Date: May 19, 2008
Replaces: January 31, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 197 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Topcoat
Type of Coating : Polyamide cured Epoxy-Topcoat
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Penguard FC
SAP M/N (SAMS S/N) : 1000194565 (09-612-357), 1000194568 (09-612-358), 1000194590 (09-612-
359), 1000195273 (09-612-462), 1000195277 (09-612-465) or 1000195314
(09-612-467)1000194797 (09-612-369) or 1000194960 (09-612-375)
(Please see APCS 1A/B/C Topcoat for requirements.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 198 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26
Type of Coating : Self-Priming Epoxy Mastic
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Jotamastic 80
SAP M/N (SAMS S/N) : 1000194381 (09-612-330), 1000194386 (09-612-331), 1000194401 (09-612-
332), 1000194407 (09-612-333), 1000194420 (09-612-334), 1000194427 (09-612-335) or
1000194471 (09-612-336)
(Please see APCS-22A for data sheets. Application shall be in accordance with APCS-26)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 199 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-26T Topcoat
Type of Coating : Polyurethane Topcoat
Manufacturer : Jotun Saudia Company Ltd.
Product Name : Hardtop XP
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-612-367),
1000194795 (09-612-368) or 1000194851 (09-612-371)
(Refer to APCS-22A data sheet for the primer and to polyurethane of APCS-1D/E/F data sheet for the
topcoat. Application shall be in accordance with APCS-26T.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 200 of 398
7 Oasis Ameron – Approved Materials
APCS-1A Dimetcote 6 or Dimetcote 9 Inorganic Zinc Primer: Solvent-Based
Dimetcote 3A Inorganic Zinc Primer: Water-Based
Amercoat 383 HS Epoxy Topcoat: Red/Gray/Yellow
APCS-1B Amercoat 71 Epoxy Primer: Oxide Red
Amercoat 383 HS Epoxy Topcoat: Red/Gray/Yellow
APCS-1C Amercoat 68 SA Zinc-Rich Epoxy Primer: Organic
Amercoat 383 HS Epoxy Topcoat: Red/Gray/Yellow
APCS-1D (Use APCS-1A as primer and internediate coat.)
Amercoat 450 GL Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1E (Use APCS-1B as primer and internediate coat.)
Amercoat 450 GL Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1F (Use APCS-1C as primer and internediate coat.)
Amercoat 450 GL Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-2A/B Amercoat 253 Phenolic Epoxy For Immersion Service
APCS-2C Amercoat 346 Epoxy For Elevated Temperature (Self-
Priming)
APCS-2D Amercoat 56E Amine-Cured Epoxy
APCS-3 Amercoat 325 Coal Tar Epoxy: Red/Black
APCS-4 Amercoat 2214 Zinch Chromate Primer: Red
Amercoat 2213 Aluminum Topcoat
APCS-6 Amercoat 2214 Zinc Chromate Primer: Red
Amercoat 52HS High Gloss Enamel Topcoat: Various Colors
APCS-11A Dimetcote 6 Inorganic Zinc Primer: Solvent-Based
Amercoat 878 Heat Resistant Topcoat: Aluminum
APCS-11B Amercoat 878 Heat Resistant Aluminum (Self-Priming)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 201 of 398
Oasis - Approved Materials (Cont'd)
APCS-12 Amercoat 71 Epoxy Primer: Oxide Red
Amercoat 383 HS Epoxy Topcoat: Red/Gray/Yellow
APCS-17A Dimetcote 6 or Dimetcote 9 Inorganic Zinc Primer: Solvent-Based
APCS-17B Dimetcote 3A Inorganic Zinc Primer: Water-Based
APCS-19B Tideguard 171X Splash Zone Compound: Spray-Applied
APCS-19C Amerlock 400 GFA Glass Reinforced Epoxy: Self-Priming
APCS-22A Amercoat 3323 Epoxy Primer
Amercoat 385 Epoxy Topcoat: Gray/Yellow/Black
APCS-26 Amerlock 400 Epoxy Mastic: Aluminum/White/Orange/Red
Yellow/Gray/Black
APCS-26T (Use APCS-26 as primer and Amercoat 450 GL in APCS-1D as topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 202 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Oasis Ameron Ltd.
Product Name : Dimetcote 6
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1.97 Liquid: 1 Zinc
Dust by weight
2.3 Thinner : Amercoat 65
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 20 hours @ 25°C
8 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 70°C
3.2 Typical Wet Film Thickness Per Coat : 100 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 203 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Dimetcote 6 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum *
10°C 1 Hour 2 Days None
30°C ⅓ Hour 1 Day None
50°C <5 Minutes 16 Hours None
* Minimum relative humidity to ensure cure is 50%.
Recoating (same product) shall be 24 hours maximum.
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 inch
Fluid Pressure 750 psi
Conventional Spray : Pressure pot with agitator. Cap tip
704E (Devilbiss)
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 63 to 69%
4.2 Product Weight (ASTM D1475) : 2.40 to 2.50 Kg/L
4.3 Viscosity (ASTM D562) : 78 to 92 KU
4.4 Flash Point (ASTM D93 or D56) : 13°C
Approval Date: January 10, 2005
Replaces: October 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 204 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat
Type of Coating : Epoxy Topcoat
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 383 HS
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960 (09-612-
375)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base: hardener) by volume : 4:1
2.3 Thinner : Amercoat 65
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 8 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 160 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : Three coats, when overcoating zinc silicate primer
(APCS-1A) and the first coat shall be mist coat
(10% thinned). Two coats, when overcoating zinc-
rich epoxy.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 205 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat - Amercoat 383 HS (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 16 Hours None
30°C 16 Hours 8 Hours None
50°C 6 Hours 6 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.024 inch
Fluid Pressure 1,700 psi
Conventional Spray : Pressure pot with agitator. Cap tip
78 or 765 (Devilbiss)
Brush & Roller : For touch up of small areas
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 61 to 65%
4.2 Product Weight (ASTM D1475) : 1.45 to 1.50 Kg/L
4.3 Viscosity (ASTM D562) : More than 140 KU
4.4 Flash Point (ASTM D93 or D56) : 25°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 206 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B
Type of Coating : Polyamide-Cured Epoxy Primer
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 71
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base : hardener) by Volume : 4 : 1
2.3 Thinner : Amercoat 9HF
SAP M/N (SAMS S/N) : 1000198455 (09-738-280)
2.4 Thinning Requirements (Airless Spray) : Maximum 10% by volume
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 8 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 147 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 20.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 207 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B Primer - Amercoat 71 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 15 Hours 8 Hours N/A
30°C 4 Hours 4 Hours N/A
50°C 3 Hours 3 Hours N/A
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid Pressure 1,200 psi
Conventional Spray : Pressure pot with agitator.
Nozzle/cap (Devilbiss) 78 or 765
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 49 to 53%
4.2 Product Weight (ASTM D1475) : 1.36 to 1.42 Kg/L
4.3 Viscosity (ASTM D562) : 120 to 140 KU
4.4 Flash Point (ASTM D93 or D56) : 24°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 208 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C
Type of Coating : Polyamide-Cured Zinc-Rich Epoxy Primer (Organic)
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 68 SA
SAP M/N (SAMS S/N) : 1000195348 (09-612-580), 1000195361 (09-612-590) or 1000195361 (09-612-
590)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base : hardener) by volume : 4 : 1
2.3 Thinner : Amercoat 9HF
SAP M/N (SAMS S/N) : 1000198449 (09-738-240)
2.4 Thinning Requirements (Airless Spray) : Maximum 10% by volume
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 1 day @ 25°C
8 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 130 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 23.6 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 209 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C Primer - Amercoat 68 SA (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 12 Hours 16 Hours N/A
30°C 3 Hours 2 Hours N/A
50°C 2 Hours 1 Hour N/A
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 to 0.021 inch
Fluid Pressure 1,750 psi
Conventional Spray : Pressure pot with agitator.
Nozzle/cap (Devilbiss) 78 or 765
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 56 to 62%
4.2 Product Weight (ASTM D1475) : 2.50 to 2.60 Kg/L
4.3 Viscosity (ASTM D562) : 110 to 140 KU
4.4 Flash Point (ASTM D93 or D56) : 35°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 210 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat
Type of Coating : Aliphatic Polyurethane
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 450GL
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-612-367),
1000194795 (09-612-368) or 1000194851 (09-612-371)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base : hardener) by volume : 4:1
2.3 Thinner : Amercoat 65
SAP M/N (SAMS S/N) : 1000198479 (09-738-345)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 6 hours @ 25°C
hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 90 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 22.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 211 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat - Amercoat 450GL (Cont'd)
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried
10°C 2 Hours 12 Hours Days - -
30°C ¾ Hour 6 Hours Days - -
50°C ⅓ Hour 4 Hours Days - -
3.7 Recommended Equipment
Airless Spray : Tip size: 0.015 to 0.017 inch
Fluid Pressure: 1,700 to 2,300 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 54 to 58%
4.2 Product Weight (ASTM D1475) : 1.21 to 1.27 Kg/L
4.3 Viscosity (ASTM D562) : 50 to 100 KU
4.4 Flash Point (ASTM D93 or D56) : 29°C
Note: Use either APCS-1A, 1B or 1C (see previous data sheets) as primer and intermediate coat, and
the dry film thickness should be in accordance with APCS-1D, 1E or 1F of SAES-H-101.
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 212 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2C
Type of Coating : Phenolic Epoxy
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 346
SAP M/N (SAMS S/N) : Primer 1000194295, Topcoat 1000194298 (09-612-313) or 1000194352 (09-612-
314)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base: hardener) by volume : 4:1
2.3 Thinner : Amercoat 9 HF
SAP M/N (SAMS S/N) : 1000198483 (09-738-380)
2.4 Thinning Requirements : 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 2 hours @ 25°C
Less than 1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 55°C
3.2 Typical Wet Film Thickness Per Coat : 136 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 29.3 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 213 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2C (Self Priming) - Amercoat 346 (Cont'd)
3.6 Drying Time
Substrate Dry to Handle Ovecoat Interval To Immersion
Temperature and Walk-on Minimum Maximum (Minimum)
10°C NR NR NR
15°C 1 Day 12 Days 1 Month
20°C 16 Hours 7 Days 12 Days
25°C 12 Hours 6 Days 8 Days
30°C 8 Hours 3 Days 4 Days
35°C 6 Hours 1.5 Days 1.5 Days
40°C 4 Hours 18 Hours 1 Day
45°C 3 Hours 9 Hours 1 Day
50°C 2-½ Hours 4 Hours 1 Day
55°C 1 Hour 2 Hours 1 Day
60°C NR NR 1 Day
NR - Not Recommneded
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.017 to 0.023 inch
Fluid Pressure 3,000 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 70 to 76%
4.2 Product Weight (ASTM D1475) : 1.56 to 1.64 Kg/L
4.3 Viscosity (ASTM D562) : > 140 KU
4.4 Flash Point (ASTM D93 or D56) : 22°C
Approval Date: January 10, 2005
Replaces: January 6, 1998
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 214 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3
Type of Coating : Coal Tar Epoxy: Polyamide-Cured
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 325
SAP M/N (SAMS S/N) : 1000194372 (09-612-318) or 1000194375 (09-612-320);
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base: hardener) by volume : 4:1
2.3 Thinner : Amercoat 65
SAP M/N (SAMS S/N) : 1000198441 (09-738-180)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 4 hours @ 25°C
Less than 1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 330 micrometers
3.3 Typical Dry Film Thickness Per Coat : 250 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 30 M2/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 215 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3 - Amercoat 325 (Cont'd)
3.6 Drying Time
Substrate Dry to Handle Ovecoat Interval To Immersion
Temperature and Walk-on Minimum Maximum (Minimum)
10°C 4 Days 18 Hours 3 Days 14 Days
15°C 12 Hours 1.5 Days 7 Days
20°C 8 Hours 1 Day 3 Days
25°C 6 Hours 21 Hours 2.8 Days
30°C 1.5 Days 4 Hours 18 Hours 2.5 Days
35°C 3 Hours 16 Hours 2.1 Days
40°C 2 Hours 12 Hours 1.7 Days
45°C 1.8 Hours 8 Hours 1.5 Days
50°C 8 Hours 1.5 Hours 6 Hours 1.3 Days
55°C 1.3 Hours 4 Hours 1.1 Days
60°C 1 Hour 3 Hours 1 Day
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip size 0.018 to 0.027 inch
Fluid Pressure 2,500 psi
Conventional Spray : Tip Size
Atomizing Pressure
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 73 to 79%
4.2 Product Weight (ASTM D1475) : 1.25 to 1.30 Kg/L
4.3 Viscosity (ASTM D562) : 100 to > 140 KU
4.4 Flash Point (ASTM D93 or D56) : 27°C
Approval Date: January 10, 2005
Replaces: January 6, 1998
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 216 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4
Type of Coating : Zinc Chromate Primer
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 2214
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Amercoat 15 (White Spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 100 micrometers
3.3 Typical Dry Film Thickness Per Coat : 55 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 22 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 217 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4 Primer - Amercoat 2214 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 1 Day None
30°C 16 Hours 16 Hours None
50°C 8 Hours 8 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size 0.013 to 0.015 inch
Fluid Pressure 1,500 psi
Conventional Spray : 765 Tip/Cap (Devilbiss)
Atomizing Pressure
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 53 to 57%
4.2 Product Weight (ASTM D1475) : 1.33 to 1.40 Kg/L
4.3 Viscosity (ASTM D562) : 86 to 135 KU
4.4 Flash Point (ASTM D93 or D56) : 35°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 218 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4
Type of Coating : Aluminum Topcoat
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 2213
SAP M/N (SAMS S/N) : 1000196402 (09-686-354)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Amercoat 15 (White Spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 85 micrometers
3.3 Typical Dry Film Thickness Per Coat : 30 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 14 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 219 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4 Topcoat - Amercoat 2213 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 12 Hours None
30°C 16 Hours 4 Hours None
50°C 6 Hours 2 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size 0.013 to 0.015 inch
Fluid Pressure 750 psi
Conventional Spray : Tip/Cap (Devilbiss) 765
Atomizing Pressure
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 35 to 40%
4.2 Product Weight (ASTM D1475) : 0.95 to 1.01 Kg/L
4.3 Viscosity (ASTM D562) : 67 to 75 KU
4.4 Flash Point (ASTM D93 or D56) : 27°C
4.5 Gloss (ASTM D523) : 70%
Approval Date: January 10, 2005
Replaces: December 26, 1993
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 220 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : Zinc Chromate Primer
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 2214
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
(See APCS-4 Primer's Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 221 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : Alkyd Topcoat
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 52 HS
SAP M/N (SAMS S/N) : 1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495 (09-
630-763), 1000195532 (09-630-768), 1000195571 (09-630-769), 1000195577
(09-630-770), 1000195631 (09-630-771), 1000195637 (09-630-773), 784
1000195650 (09-630-785), 1000195683 (09-630-794), 1000195685 (09-630-
796), 1000195687 (09-630-798), 1000195689 (09-631-301), 1000195742 (09-
631-322), 1000195745 (09-631-450), 1000195747 (09-631-455), 1000195749
(09-631-462), 1000195801 (09-631-465), 1000195803 (09-631-590) or
1000195831 (09-631-645)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Amercoat 15 (White Spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 86 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 23.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 222 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6 Topcoat - Amercoat 52 HS (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 2 Days 2 Days N/A
30°C 12 Hours 18 Hours N/A
50°C 3 Hours 12 Hours N/A
3.7 Recommended Equipment
Airless Spray : Tip size 0.011 to 0.015 inch
Fluid Pressure 1,500 psi
Conventional Spray : Tip/Cap (Devilbiss) 765
Atomizing Pressure
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 54 to 60%
4.2 Product Weight (ASTM D1475) : 1.04 to 1.35 Kg/L
4.3 Viscosity (ASTM D562) : 67 to 100 KU
4.4 Flash Point (ASTM D93 or D56) : 35°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 223 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Oasis Ameron Ltd.
Product Name : Dimetcote 6
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1.97 Liquid: 1 Zinc Dust
by weight
2.3 Thinner : Amercoat 65
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 20 hours @ 25°C
8 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 70°C
3.2 Typical Wet Film Thickness Per Coat : 100 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 224 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Primer - Dimetcote 6 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Hour 2 Days None
30°C 20 Minutes 1 Day None
50°C < 5 Minutes 16 Hours None
Notes: 1. Minimum relative humidity to ensure cure is 50%.
2. Maximum overcoat intervzal (with Dimetcote 6) is one day.
3.7 Recommended Equipment
Airless Spray : Tip size 0.021 inch
Fluid Pressure 750 psi
Conventional Spray : Pressure pot with agitator.
Cap/Tip (Devilbiss) 704E.
Atomizing Pressure
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 63 to 69%
4.2 Product Weight (ASTM D1475) : 2.40 to 2.50 Kg/L
4.3 Viscosity (ASTM D562) : 78 to 92 KU
4.4 Flash Point (ASTM D93 or D56) : 13°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 225 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Heat Resistant Topcoat
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 878
SAP M/N (SAMS S/N) : 1000196488 (09-687-325)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Amercoat 65 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 65 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 18.0 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 226 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Topcoat - Amercoat 878 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 4 Hours 2 Hours None
30°C 2 Hours 1 Hour None
50°C 1 Hour ½ Hour None
3.7 Recommended Equipment
Airless Spray : Tip size 0.011 to 0.017 inch
Fluid Pressure 750 psi
Conventional Spray : 78 or 765 Tip Cap (Devilbiss)
Atomizing Pressure
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 43 to 47%
4.2 Product Weight (ASTM D1475) : 1.14 to 1.18 Kg/L
4.3 Viscosity (ASTM D562) : 65 to 75 KU
4.4 Flash Point (ASTM D93 or D56) : 25°C
Approval Date: January 10, 2005
Replaces: November 14, 2001
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 227 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B
Type of Coating : Heat Resistant Silicone Aluminum
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 878
SAP M/N (SAMS S/N) : 1000196502 (09-687-330)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : Amercoat 65 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 65 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 18 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 228 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B (Self Priming) - Amercoat 878 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 4 Hours 2 Hours None
30°C 2 Hours 1 Hour None
50°C 1 Hour ½ Hour None
3.7 Recommended Equipment
Airless Spray : Tip size 0.011 to 0.017 inch
Fluid Pressure 750 psi
Conventional Spray : 78 or 765 Tip Cap (DeVilbiss)
Atomizing Pressure
Brush & Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 43 to 47%
4.2 Product Weight (ASTM D1475) : 1.14 to 1.18 Kg/L
4.3 Viscosity (ASTM D562) : 65 to 75 KU
4.4 Flash Point (ASTM D93 or D56) : 25°C
Approval Date: January 10, 2005
Replaces: November 14, 2001
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 229 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Primer
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 71
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
(Refer to APCS-1B Primer Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 230 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Topcoat
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 383 HS
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960 (09-612-
375)
(Refer to APCS-1B Top Coat Data Sheet. Also, refer to APCS-12 of
Saudi Aramco Engineering Standard SAES-H-101 for Application of Aggregate)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 231 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A
Type of Coating : Inorganic Zinc Primer - Solvent-Based
Manufacturer : Oasis Ameron Ltd.
Product Name : Dimetcote 6
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
(See APCS-11A Primer's Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 232 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19B
Type of Coating : Splash Zone Compound: Spray-Applied
Manufacturer : Oasis Ameron Ltd.
Product Name : Tideguard 171X
SAP M/N (SAMS S/N) : 1000194520 (09-612-339)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4 Kg Powder to 1 Kg Liquid
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements (Airless Spray) : N/A
2.5 Induction Time : None
2.6 Pot Life (mixture) : 2-½ hours @ 25°C
1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 2,540 micrometers
3.3 Typical Dry Film Thickness Per Coat : 2,540 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 233 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19B - Tideguard 171X (Cont'd)
3.6 Drying Time
Soil
Substrate Recoat Interval Water Burial
Temperature To Handle Minimum Maximum Immersion (Backfill)
10°C 18 Hours N/A 1.5 Days N/A 18 Hours
30°C 9 Hours N/A 12 Hours N/A 9 Hours
50°C 6 Hours N/A 4 Hours N/A 2 Hours
3.7 Recommended Equipment
Carouse/Quick Spray : Tip size: 1-¼ inch Rubber Tip
Fluid Pressure: Free flow with air mix
Conventional Spray : N/A
Brush & Roller : N/A
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.84 to 1.90 Kg/L
4.3 Viscosity (ASTM D562) : More than 140 KU
4.4 Flash Point (ASTM D93 or D56) : 80°C
5. Special Note
Mixed Tideguard 171X has a consistency like that of cement mixture.
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 234 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS - 19C
Type of Coating : HIGH SOLIDS GLASSFLAKE EPOXY COATING
Manufacturer : Oasis Ameron Ltd.
Product Name : Amerlock 400 GFA
SAP M/N (SAMS S/N) : 1000788243 (09-000-530) and 1000788244 (09-000-531)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base: hardener) by volume : 1:1
2.3 Thinner : Amercoat 65
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 3½ hours @ 10°C
2 hours @ 20°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 550 micrometers
3.3 Typical Dry Film Thickness Per Coat : 500 micrometers
3.4 Theoretical Coverage @ 500 Micrometers : 1.82 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2 Coats
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 235 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19C – Amercoat 400 GFA (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 48 Hours 48 Hours 3 months ???
30°C 24 Hours 24 Hours 3 months ???
50°C 12 Hours 12 Hours 2 months ???
3.7 Recommended Equipment
Airless Spray : Tip size 0.035 inch
With a 3/8 – To ½ inch
Spray hose
Brush & Roller : For touch up of small areas
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 91%
4.2 Product Weight (ASTM D1475) : 1.5Kg/L (Mixed product)
4.3 Viscosity (ASTM D562) : More than 140 KU
4.4 Flash Point (ASTM D93 or D56) : 43°C
Approval Date:
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 236 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22
Type of Coating : Damp Tolerant Epoxy Primer
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 3323 (fast drying grade)
SAP M/N (SAMS S/N) : 1000194560 (09-612-352) or 1000195239 (09-612-459)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base : hardener) by volume : 4:1
2.3 Thinner : Amercoat 65
SAP M/N (SAMS S/N) : 1000198471 (09-738-300)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : 15 minutes
2.6 Pot Life (mixture) : 4 hours @ 25°C
1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 155 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25.5 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 237 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22 Primer - Amercoat 3323 (Cont'd)
3.6 Drying Time
Substrate Topcoat Interval
Temperature To Handle Minimum Maximum
10°C 4 Hours 6 Hours 20 Days
30°C 2 Hours 3 Hours 14 Days
50°C 1 Hours 2 Hours 7 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid Pressure 3,000 psi
Conventional Spray : Pressure pot with agitator.
Cap tip 704E (Devilbiss)
Atomizing Pressure
Brush : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 62 to 68%
4.2 Product Weight (ASTM D1475) : 1.15 to 1.25 Kg/L
4.3 Viscosity (ASTM D562) : (2K to 8K Brookfield LVT)
4.4 Flash Point (ASTM D93 or D56) : 27°C
Approval Date: January 10, 2005
Replaces: November 14, 2001
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 238 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A
Type of Coating : Damp Tolerant Epoxy Topcoat
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 385
SAP M/N (SAMS S/N) : 1000194565 (09-612-357), 1000194568 (09-612-358), 1000194590 (09-
612-359), 1000195273 (09-612-462), 1000195277 (09-612-465) or
1000195314 (09-612-467)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1:1 by volume
2.3 Thinner : Amercoat 65
SAP M/N (SAMS S/N) : 1000198471 (09-738-300)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 3 hours @ 25°C
1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 280 micrometers
3.3 Typical Dry Film Thickness Per Coat : 200 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 28.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 239 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Topcoat - Amercoat 385 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 10 Hours 42 Days
30°C 10 Hours 6 Hours 14 Days
50°C 6 Hours 4 Hours 7 Days
3.7 Recommended Equipment
Airless Spray : Tip size 0.015 to 0.021 inch
Fluid Pressure 3,000 psi
Conventional Spray : Pressure pot with agitator.
Cap tip 78 or 765 (Devilbiss)
Atomizing Pressure
Brush : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 68 to 74%
4.2 Product Weight (ASTM D1475) : 1.32 to 1.48 Kg/L
4.3 Viscosity (ASTM D562) : (8K to 15K mixed Brookfield LVT)
4.4 Flash Point (ASTM D93 or D56) : 48°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 240 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26
Type of Coating : Epoxy Mastic
Manufacturer : Oasis Ameron Ltd.
Product Name : Amerlock 400 (Aluminum)
SAP M/N (SAMS S/N) : 1000194381 (09-612-330)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1:1 by volume
2.3 Thinner : Amercoat 9 HF
SAP M/N (SAMS S/N) : 1000198487 (09-738-420)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 2-½ hours @ 25°C
1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 150 micrometers
3.3 Typical Dry Film Thickness Per Coat : 125 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 34 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 241 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26 - Amerlock 400 Aluminium (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 3 Days 1 Day None
30°C 10 Hours 8 Hours None
50°C 3 Hours 3 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size 0.019 to 0.023 inch
Fluid Pressure 2,000 psi
Conventional Spray : Pressure pot MBC or JGA gun
(Devilbiss)
Atomizing Pressure
Brush : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 82 to 88%
4.2 Product Weight (ASTM D1475) : 1.28 to 1.34 Kg/L
4.3 Viscosity (ASTM D562) : More than 140 KU
4.4 Flash Point (ASTM D93 or D56) : 29°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 242 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26
Type of Coating : Epoxy Mastic
Manufacturer : Oasis Ameron Ltd.
Product Name : Amerlock 400 (Colors)
SAP M/N (SAMS S/N) : 1000194386 (09-612-331), 1000194401 (09-612-332), 1000194407 (09-
612-333), 1000194420 (09-612-334), 1000194427 (09-612-335) or
1000194471 (09-612-336)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1:1 by volume
2.3 Thinner : Amercoat 9 HF
SAP M/N (SAMS S/N) : 1000198487 (09-738-420)
2.4 Thinning Requirements (Airless Spray) : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 1.5 hours @ 25°C
½ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 150 micrometers
3.3 Typical Dry Film Thickness Per Coat : 125 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 34.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 243 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26 - Amerlock 400 Color (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 3 Days 2 Days None
30°C 5 Hours 4 Hours None
50°C 2 Hours 2 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size 0.019 to 0.023 inch
Fluid Pressure 2,000 psi
Conventional Spray : Pressure pot MBC or JGA gun
(Devilbiss)
Atomizing Pressure
Brush : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 842 to 90%
4.2 Product Weight (ASTM D1475) : 1.30 to 1.50 Kg/L
4.3 Viscosity (ASTM D562) : More than 140 KU
4.4 Flash Point (ASTM D93 or D56) : 55°C
Approval Date: January 10, 2005
Replaces: August 16, 1994
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 244 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-26T Topcoat
Type of Coating : Polyurethane Topcoat
Manufacturer : Oasis Ameron Ltd.
Product Name : Amercoat 450 GL
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793
(09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
(Refer to APCS-26 data sheet for the primer and to polyurethane of APCS-1D/E/F data sheet for the
topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 245 of 398
8 Sipco – Approved Products
APCS-1A (SIPCO)
Sipzinc 130 Inorganic Zinc Primer: Solvent-Based
Sipzinc 180 Inorganic Zinc Primer: Water-Based
Sipoxy-Shield 240 Epoxy Topcoat: Red/Gray/Yellow
APCS-1B (SIPCO)
Siprime 215 Epoxy Primer
Sipoxy-Shield 240 Epoxy Topcoat: Red/Gray/Yellow
APCS-1C (SIPCO)
Sipzinc 160 Zinc-Rich Epoxy Primer
Sipoxy-Shield 240 Epoxy Topcoat: Red/Gray/Yellow
APCS-1D (Use APCS-1A as primer and internediate coat.
Sipthane 360 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1E (Use APCS-1B as primer and internediate coat.
Sipthane 360 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1F (Use APCS-1C as primer and internediate coat.
Sipthane 360 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-2A/B Sipoxy-Guard 270 Epoxy: Cream/Blue
APCS-2C Siptank 250 Epoxy: White/Pale Blue
APCS-2D Sipoxy-Guard 245 Primer: Yellow FS 595a 23594
Topcoat: White FS 595a 27780
APCS-3 Siptar 6444 Coal Tar Epoxy: Dark Brown/Black
APCS-4 Sipkyd Zincrome 410 Zinc Chromate Primer: Green
Sipkyd Aluminium 440 Aluminum Topcoat
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 246 of 398
SIPCO – Approved Products (Cont'd)
APCS-6 Sipkyd Zincrome 410 Zinc Chromate Primer: Green
Sipkyd Finish 430 High Gloss Enamel Topcoat: Various Colors
APCS-9 Sipchlor 608 Chlorinated Rubber Primer: Red Lead
Sipchlor 652 Chlorinated Rubber Topcoat: Gray/Green
Brown/Blue
APCS-10 Sipflex 635 Bituminous: Black
APCS-11A Sipzinc 130 Inorganic Zinc Primer: Solvent-Based
Sipzinc 180 Inorganic Zinc Primer: Water-Based
Siptherm 510 Heat Resistant Topcoat
APCS-11B Siptherm 520 Self-Priming Heat Resistant Coating
APCS-12 (SIPCO)
Siprime 215 Epoxy Primer
Sipoxy-Shield 240 Epoxy Topcoat: Red/Gray/Yellow
APCS-17A (SIPCO)
Sipzinc 130 Inorganic Zinc Primer: Solvent-Based
APCS-17B (SIPCO)
Sipzinc 180 Inorganic Zinc Primer: Water-Based
APCS-19A Sip-Splash 640 Splash Zone Compound: Hand-Applied,
Green
APCS-22A (SIPCO)
Sipoxy-Shield 275 Epoxy- Gray/Yellow/Black
APCS-23 Sipflex 635 Bitumiuous: Black
APCS-26 (SIPCO) Sipoxy-Shield 285 Epoxy Mastic: Aluminum/White/Orange/
Red/Yellow/Gray/Black
APCS-26T (Use APCS-26 as primer and Sipthane 360 in APCS-1D as topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 247 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/D
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipzinc 130
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4.40 kg Liquid:
7.60 kg Zinc Dust
2.3 Thinner : T-11 / T-770
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 6 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 105 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 248 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/D Primer - Sipzinc 130 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum *
10°C 1 Hour 16 Hours None
30°C 35 Minutes 16 Hours None
50°C 35 Minutes 12 Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure sweet water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 to 0.021 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Tip Size:
Atomizing Pressure: 80 psi (5.5 bars)
Brush : Touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 60 to 62%
4.2 Product Weight (ASTM D1475) : 2.36 to 2.42 Kg/L
4.3 Viscosity (ASTM D562) : 80 to 90 KU
4.4 Flash Point (ASTM D93 or D56) : 16°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 249 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/D
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipzinc 180
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4.17 kg Binder:
9.95 kg Zinc Dust
2.3 Thinner : Water not used (for cleaning only)
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : None
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 1 day @ 25°C
16 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 107 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24.4M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 250 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/D Primer - Sipzinc 180 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 4 Hours 1 Day None
30°C 4 Hours 1 Day None
50°C 3 Hours 16 Hours None
3.7 Recommended Equipment
Airless Spray : Only with specially designed
airless spray equipment. Tip size
0.017 to 0.021 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Tip Size:
Atomizing Pressure: 15 to 22 psi
(1 to 1.5 bars)
Brush : Touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 50 to 61%
4.2 Product Weight (ASTM D1475) : 2.85 to 2.95 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : None
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 251 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1A/B/C TOPCOAT
Type of Coating : Polyamide Epoxy Topcoat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipoxy-Shield 240
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960
(09-612-375)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base : Hardener) by volume : 3:1;
2.3 Thinner : Thinner 740
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements : 10% maximum
2.5 Induction Time : 15 min. @ 25C
2.6 Pot Life : 4 hours @ 25°C
1.5 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 111 to 167 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 to 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 36 M²/L
3.5 Minimum Number of Coats (Spray Application) : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 252 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat
Sipoxy-Shield 240
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried
10 °C 12 Hours 8 Hours 21 Days
30 °C 2 Hours 4 Hours 14 Days
50 °C 1.5 Hours 3 Hours 7 Days
Maximum recoating time is indefinite if the surface is washed down with 1:1 (Sipclean
615: Water) followed with a thorough rinse with water.
3.7 Recommended Equipment
Airless Spray: Tip Size: 0.019 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray: Tip Needle: 0.070 to 0.086 inch
Atomizing Pressure: 15 to 22 psi
Brush: For touch up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 88 to 92%
4.2 Product Weight (ASTM D1475) : 1.55 to 1.60 Kg/L
4.3 Viscosity (ASTM D562) : 110 to 130 KU
4.4 Flash Point (ASTM D93 or D56) : 27°C
Note: This product is also an intermediate coat for APCS-1D, 1E, and 1F. Refer to SAES-H-101 for
dry film thickness requirement when used for APCS-1D, 1E, and 1F.
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 253 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1B/1E PRIMER
Type of Coating : Polyamide Epoxy Primer
Manufacturer : Saudi Industrial Paint Co.
Product Name : Siprime 215
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base : Hardener) by volume : 9:1
2.3 Thinner : Thinner 740
SAP M/N (SAMS S/N) : 1000198455 (09-738-280)
2.4 Thinning Requirements : 10% maximum
2.5 Induction Time : 15 min. @ 25C
2.6 Pot Life : 12 hrs. @ 25°C
6 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 81 to 161 microns
3.3 Typical Dry Film Thickness Per Coat : 50 to 100 microns
3.4 Theoretical Coverage @ 25 Micrometers : 24 M²/L
3.5 Minimum Number of Coats (Spray Application) : One
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 254 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1B/1E Primer
Siprime 215
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried
10°C 1.5 Hours 3 Hours
30°C 45 Minutes 1 Hour
50°C 45 Minutes 1 Hour
3.7 Recommended Equipment
Airless Spray: Tip Size: 0.017 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray: Tip Needle: 0.070 to 0.086 inch
Atomizing Pressure: 15 to 22 psi
Brush: For touch up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 60 to 64%
4.2 Product Weight (ASTM D1475) : 1.4 to 1.45 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : 27°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 255 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1C/1F PRIMER
Type of Coating : Organic Zinc Rich Epoxy Primer
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipzinc 160
SAP M/N (SAMS S/N) : 1000195348 (09-612-580), 1000195361 (09-612-590) or 1000195361
(09-612-590)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base : Hardener) by volume : 4:1
2.3 Thinner : 1000198449 (09-738-240)
SAP M/N (SAMS S/N) : 09-738-240
2.4 Thinning Requirements : 10% maximum
2.5 Induction Time : 25 min. @ 10C
None @ 20C or above.
2.6 Pot Life : 8 hours @ 25°C
4 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 67 to 125 microns
3.3 Typical Dry Film Thickness Per Coat : 40 to 75 microns
3.4 Theoretical Coverage @ 25 Micrometers : 24 M²/L
3.5 Minimum Number of Coats (Spray Application) : One
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 256 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1C/1F Primer
Sipzinc 160
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried
10°C 10 Hours 4 Hours None
30°C 4 Hours 2 Hours None
50°C 2 Hours 1 Hour None
3.7 Recommended Equipment
Airless Spray: Tip Size: 0.021 to 0.025 inch
Fluid Pressure: 2,050 to 2,350 psi
Conventional Spray: Tip Needle: 1.5 to 2 mm.
Atomizing Pressure: 44 to 59 psi
Brush: For touch up only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 58 to 62%
4.2 Product Weight (ASTM D1475) : 2.1 to 2.15 Kg/L
4.3 Viscosity (ASTM D562) : 100 to 120 KU
4.4 Flash Point (ASTM D93 or D56) : 27°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 257 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1D/E/F INTERMEDIATE COAT
Type of Coating : Polyamide Epoxy
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipoxy-Shield 240
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960
(09-612-375)
(Refer to APCS-1A/B/C Topcoat data sheet for general requirements. Also, refer to APCS-1D/E/F of
SAES-H-101 for dry film thickness requirement.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 258 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1D/E/F TOPCOAT
Type of Coating : Polyurethane Topcoat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipthane 360
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-
612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base: Hardener) by volume : 6:1
2.3 Thinner : Thinner 760
SAP M/N (SAMS S/N) : 1000198479 (09-738-345)
2.4 Thinning Requirements : 5% maximum
2.5 Induction Time : 15 min. @ 25C
2.6 Pot Life : 8 hours @ 25°C
2.5 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : micrometers
3.3 Typical Dry Film Thickness Per Coat : micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 22.4 M²/L
3.5 Minimum Number of Coats (Spray Application) : One
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 259 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat
Sipthane 360
3.6 Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried
10°C 12 Hours 10 Hours 42 Days
30°C 6 Hours 4 Hours 28 Days
50°C 4 Hours 3 Hours 14 Days
3.7 Recommended Equipment
Airless Spray: Tip Size: 0.015 to 0.019 inch
Fluid Pressure: 2,100 psi
Conventional Spray: Not recommended
Brush: For small areas and stripe coats only.
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 54 to 58%
4.2 Product Weight (ASTM D1475) : 1.1 to 1.35 Kg/L
4.3 Viscosity (ASTM D562) : 65 to 75 KU
4.4 Flash Point (ASTM D93 or D56) : 27°C
Approval Date: January 12, 2005
Replaces: February 4, 1999
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 260 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat
Type of Coating : Polyamide High Build Epoxy Coating
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipoxy-Shield 240
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960 (09-
612-375)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base : Hardener) by volume : 1:1
2.3 Thinner : T-10 / T-740
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : 15 minutes @ 25°C
2.6 Pot Life (mixture) : 8 hours @ 25°C
4 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 167 to 250 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 to 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 261 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat - Sipoxy-Shield 240 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum *
10°C 12 Hours 8 Hours 3 Weeks
30°C 2 Hours 4 Hours 2 Weeks
50°C 1.5 Hours 3 Hours 1 Week
* Maximum recoating time is unlimited with all temperatures as long as the surface is
washed down with a 1 to 1 solution of SIPCO's water based cleaner Sipclean 615
followed by a thorough water rinse.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Tip Size: 0.070 to 0.086 inch
Atomizing Pressure: 22 psi
Brush : Touch-up for small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 58 to 62%
4.2 Product Weight (ASTM D1475) : 1.35 to 1.40 Kg/L
4.3 Viscosity (ASTM D562) : 90 to 115 KU
4.4 Flash Point (ASTM D93 or D56) : 27°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 262 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2A/B
Type of Coating : Phenolic Epoxy
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipoxy-Guard 270
SAP M/N (SAMS S/N) : 1000195232 and 1000195235 for APCS-2A; 1000195317 and
1000195341 for APCS-2B
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base : Hardener) by Volume : 4 : 1
2.3 Thinner : Thinner 740
SAP M/N (SAMS S/N) : 1000198377 (09-738-140)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : 15 minutes @ 25°C
2.6 Pot Life (mixture) : 4 hours @ 25°C
1-½ hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 139 to 208 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 to 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 28.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 263 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2A/B Sipoxy-Guard 270 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum* To Immersion
5°C 2.2 Days 60 Days 21 Days
10°C 10 Hours 1.9 Days 45 Days 16 Days
15°C 1.7 Days 40 Days 10 Days
20°C 13 Hours 25 Days 8.5 Days
25°C 10 Hours 18 Days 7 Days
30°C 6 Hours 8 Hours 13 Days 5 Days
35°C 6 Hours 10 Days 4.5 Days
40°C 4 Hours 7 Days 4 Days
45°C 4 Hours 4 Days 3.5 Days
50°C 2 Hours 3.5 Hours 3 Days 2.5 Days
55°C 3 Hours 1.5 Days 2 Days
60°C 2 Hours 10 Hours 1 Day
* If mixed paint and substrate temperatures are both over 32°C (90°F),
the maximum recoat interval should be 8 to 10 hours.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.019 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Not recommended
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 68 to 72%
4.2 Product Weight (ASTM D1475) : 1.35 to 1.40 Kg/L
4.3 Viscosity (ASTM D562) : 85 to 95 KU
4.4 Flash Point (ASTM D93 or D56) : 38°C
Approval Date: Dec. 249, 2008
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 264 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2C
Type of Coating : Epoxy: Primer/Top Coat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Siptank 250
SAP M/N (SAMS S/N) : Primer 000194295 (09-612-312), Topcoat 1000194298 (09-612-313) or
1000194352 (09-612-314)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base : Hardener) by Volume : 4 : 1
2.3 Thinner : Thinner 720
SAP M/N (SAMS S/N) : 1000198483 (09-738-380)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : 1 hour @ 25°C
2.6 Pot Life (mixture) : 4 hours @ 25°C
1-½ hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 110 to 165 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 to 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 36.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 265 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2C – Siptank 250 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
5°C 2.2 Days 60 Days 21 Days
10°C 10 Hours 1.6 Days 45 Days 16 Days
15°C 1.3 Days 40 Days 10 Days
20°C 1.1 Days 25 Days 8.5 Days
25°C 20 Hours 18 Days 7 Days
30°C 6 Hours 15 Hours 13 Days 5 Days
35°C 12 Hours 10 Days 4.5 Days
40°C 8 Hours 7 Days 4 Days
45°C 6 Hours 5 Days 3.5 Days
50°C 2 Hours 3 Hours 5 Days 2.5 Days
55°C 2 Hours 4 Days 2 Days
60°C 2 Hours 3 Days 1 Day
3.7 Recommended Equipment
Airless Spray : Tip size: 0.019 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Not recommended.
Brush : For touch-up and stripe coat only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 89 to 91%
4.2 Product Weight (ASTM D1475) : 1.45 to 1.50 Kg/L
4.3 Viscosity (ASTM D562) : 110 to 125 KU
4.4 Flash Point (ASTM D93 or D56) : 38°C
Approval Date: January 12, 2005
Replaces: February 23, 1999
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 266 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2D
Type of Coating : Epoxy Primer/Topcoat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipoxy-Guard 245
SAP M/N (SAMS S/N) : Primer 1000194354 (09-612-316), Topcoat 1000194357 (09-612-317)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base : Hardener) by Volume : 4 : 1
2.3 Thinner : Thinner 720
SAP M/N (SAMS S/N) : 1000198458 (09-738-290)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : 1 hour @ 10 to 23C
¾ hour @ 24 to 31°C
½ hour @ 32C or more
2.6 Pot Life (mixture) : 4 hours @ 25°C
1 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 125 to 158 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 to 125 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 31.6 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 267 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2D Primer/Topcoat – Sipoxy-Guard 245 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
5°C 2.2 Days 60 Days 21 Days
10°C 10 Hours 1.6 Days 45 Days 16 Days
15°C 1.3 Days 40 Days 10 Days
20°C 1.1 Days 25 Days 8.5 Days
25°C 20 Hours 18 Days 7 Days
30°C 6 Hours 15 Hours 13 Days 5 Days
35°C 12 Hours 10 Days 4.5 Days
40°C 8 Hours 7 Days 4 Days
45°C 6 Hours 5 Days 3.5 Days
50°C 2 Hours 3 Hours 5 Days 2.5 Days
55°C 2 Hours 4 Days 2 Days
60°C 2 Hours 3 Days 1 Day
3.7 Recommended Equipment
Airless Spray : Tip size: 0.019 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Not recommended
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 77 to 80%
4.2 Product Weight (ASTM D1475) : 1.37 to 1.40 Kg/L
4.3 Viscosity (ASTM D562) : 80 to 90 KU
4.4 Flash Point (ASTM D93 or D56) : 38°C
Approval Date: January 12, 2005
Replaces: February 23, 1999
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 268 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3
Type of Coating : Coal Tar Epoxy
Manufacturer : Saudi Industrial Paint Co.
Product Name : Siptar 6444
SAP M/N (SAMS S/N) : 1000194372 (09-612-318) or 1000194375 (09-612-320)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Base : hardener) by volume : 88:12
2.3 Thinner : Thinner 750
SAP M/N (SAMS S/N) : 1000198441 (09-738-180)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : 15 minutes @ 25°C
2.6 Pot Life (mixture) : 4 hours @ 25°C
3 hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 294 to 441 micrometers
3.3 Typical Dry Film Thickness Per Coat : 200 to 300 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 27.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 269 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3 - Siptar 6444 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
5°C 7 Days 40 Days 10 Days
10°C 10 Hours 3 Days 35 Days 10 Days
15°C 2 Days 30 Days 7 Days
20°C 1.5 Days 20 Days 7 Days
25°C 1 Day 10 Days 6 Days
30°C 6 Hours 1 Day 10 Days 6 Days
35°C 18 Hours 7 Days 6 Days
40°C 8 Hours 3 Days 5 Days
45°C 6 Hours 1 Day 4 Days
50°C 2 Hours 3 Hours 1 Day 3 Days
55°C 2 Hours 18 Hours 3 Days
60°C 2 Hours 12 Hours 1 Day
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Not recommended
Brush : Touch-up for small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 66 to 70%
4.2 Product Weight (ASTM D1475) : 1.40 to 1.45 Kg/L
4.3 Viscosity (ASTM D562) : 120 to 130 KU
4.4 Flash Point (ASTM D93 or D56) : 21°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 270 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4/6
Type of Coating : Rust Inhibiting Alkyd Primer
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipkyd Zincrome 410
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : T-710 (Mineral Spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 100 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 20 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 271 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4/6 Primer – Sipkyd Zincrome 410 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 16 Hours 12 Hours 14 Days
30°C 8 Hours 6 Hours 4 Days
50°C 6 Hours 6 Hours 2 Days
Drying time is based on a wet film thickness of 80 micrometers.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.015 to 0.019 inch
Fluid Pressure: 1,740 to 2,030 psi
Conventional Spray : Tip Size:
Atomizing Pressure
Brush : Touch-up for small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 48 to 52%
4.2 Product Weight (ASTM D1475) : 1.30 to 1.37 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : 39°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 272 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4
Type of Coating : Aluminum Topcoat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipkyd Aluminium 440
SAP M/N (SAMS S/N) : 1000196402 (09-686-354)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : T-710 (Mineral Spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 58 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 17.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 273 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4 Topcoat - Sipkyd Aluminium 440 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 1 Day None
30°C 16 Hours 16 Hours None
50°C 16 Hours 16 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size: 0.011 to 0.015 inch
Fluid Pressure: 2,030 to 2,320 psi
Conventional Spray : Tip Size:
Atomizing Pressure
Brush : Touch-up for small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 41 to 45%
4.2 Product Weight (ASTM D1475) : 0.95 to 1.0 Kg/L
4.3 Viscosity (ASTM D562) : 50 to 60 KU
4.4 Flash Point (ASTM D93 or D56) : 24°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 274 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : Rust Inhibiting Alkyd Primer
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipkyd Zincrome 410
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
(See APCS-4 Primer Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 275 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : High Gloss Enamel Topcoat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipkyd Finish 430
SAP M/N (SAMS S/N) : 1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495
(09-630-763), 1000195532 (09-630-768), 1000195571 (09-630-769), 1000195577
(09-630-770), 1000195631 (09-630-771), 1000195637 (09-630-773), 784
1000195650 (09-630-785), 1000195683 (09-630-794), 1000195685 (09-630-796),
1000195687 (09-630-798), 1000195689 (09-631-301), 1000195742 (09-631-322),
1000195745 (09-631-450), 1000195747 (09-631-455), 1000195749 (09-631-462),
1000195801 (09-631-465), 1000195803 (09-631-590) or 1000195831 (09-631-645)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : T-710 (Mineral Spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 50 to 58 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 17.2 to 20.0 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 276 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6 Topcoat - Sipkyd Finish 430 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 8 Hours 1 Day None
30°C 8 Hours 18 Hours None
50°C 6 Hours 16 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size: 0.013 to 0.017 inch
Fluid Pressure: 1,740 to 2,030 psi
Conventional Spray : Tip Size:
Atomizing Pressure
Brush : Touch-up for small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 43 to 50% depending on color
4.2 Product Weight (ASTM D1475) : 0.90 to 1.13 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : 33°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 277 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-9
Type of Coating : Chlorinated Rubber Primer
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipchlor 608
SAP M/N (SAMS S/N) : 1000196351 (09-685-442)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : T-730/995 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 119 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 16.0 to 16.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 278 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-9 Primer - Sipchlor 608 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Day 1 Day None
30°C 20 Hours 16 Hours None
50°C 16 Hours 12 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 to 0.021 inch
Fluid Pressure: 2,058 to 2,352 psi
Conventional Spray : Not recommended
Brush : For touch-only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 40 to 44%
4.2 Product Weight (ASTM D1475) : 1.40 to 1.44 Kg/L
4.3 Viscosity (ASTM D562) : 85 to 95 KU
4.4 Flash Point (ASTM D93 or D56) : 21°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 279 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-9
Type of Coating : Chlorinated Rubber Topcoat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipchlor 652
SAP M/N (SAMS S/N) : 1000196312 (09-685-436), 1000196317 (09-685-438), 1000196355
(09-685-448), 1000196359 (09-685-450)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : T-730/995 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 100 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 10.04 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 280 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-9 Topcoat - Sipchlor 652 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 12 Hours 16 Hours None
30°C 6 Hours 10 Hours None
50°C 4 Hours 8 Hours None
3.7 Recommended Equipment
Airless Spray : Tip size: 0.015 to 0.021 inch
Fluid Pressure: 2,100psi
Conventional Spray : Not recommended
Brush : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 24 to 26%
4.2 Product Weight (ASTM D1475) : 0.96 to 1.05 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : 21°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 281 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-10
Type of Coating : Bituminous
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipflex 635
SAP M/N (SAMS S/N) : 1000194025 (09-611-715), 1000194029 (09-611-720) or 1000194032 (09-
611-725)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : T-902 / 710 (0104; Mineral
Spirit)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 476 micrometers
3.3 Typical Dry Film Thickness Per Coat : 250 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 21.0 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 282 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-10 - Sipflex 635 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 2 Days 1-Day None 5 Days
30°C 1 Day 18 Hours None 5 Days
50°C 1 Day 18 Hours None 5 Days
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Not recommended
Brush : Suitable
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 50 to 54%
4.2 Product Weight (ASTM D1475) : 1.20 to 1.22 Kg/L
4.3 Viscosity (ASTM D562) : 120 to 130 KU
4.4 Flash Point (ASTM D93 or D56) : 21°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 283 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipzinc 130
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4.40 kgs Liquid Binder
7.6 kgs Zinc dust
2.3 Thinner : T-11 / T-770
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 6 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 105 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 25 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 284 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Primer - Sipzinc 130 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 1 Hour 16 Hours None
30°C 35 Minutes 16 Hours None
50°C 35 Minutes 12 Hours None
Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure sweet water wash then allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 to 0.021 inch
Fluid Pressure: 2,100psi
Conventional Spray : Tip Size:
Atomizing Pressure: 80 psi (5.5 bars)
Brush : Touch-up for small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 60 to 62%
4.2 Product Weight (ASTM D1475) : 2.36 to 2.42 Kg/L
4.3 Viscosity (ASTM D562) : 80 to 90 KU
4.4 Flash Point (ASTM D93 or D56) : 16°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 285 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Heat Resistant Topcoat: (150-400°C)
Manufacturer : Saudi Industrial Paint Co.
Product Name : Siptherm 510
SAP M/N (SAMS S/N) : 1000196488 (09-687-325)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : T-995 / T-730 (Xylene)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 109 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 9.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 286 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Topcoat - Siptherm 510 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 12 Hours 16 Hours None
30°C 2 Hours 12 Hours None
50°C 1.5 Hours 8 Hours None
Does not require bake to cure.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.011 to 0.015 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Tip Size:
Atomizing Pressure
Brush : Touch-up for small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 21 to 25%
4.2 Product Weight (ASTM D1475) : 0.97 to 1.00 Kg/L
4.3 Viscosity (ASTM D562) : Less than 55 KU
4.4 Flash Point (ASTM D93 or D56) : 16°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 287 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B
Type of Coating : Heat Heat Silicone Coating: Self-Priming
Manufacturer : Saudi Industrial Paint Co.
Product Name : Siptherm 520
SAP M/N (SAMS S/N) : 1000196502 (09-687-330)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : Up to 5%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 59 micrometers
3.3 Typical Dry Film Thickness Per Coat : 20 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 13.6 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 288 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B Topcoat - Siptherm 520 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 6 Hours 1 Day None
30°C 2.5 Hours 1 Day None
50°C 1.5 hours 16 Hours None
Coating will remain soft and sensitive to damage if not baked. Bake cure @ 450°C for one hour or cure
during operation @ a temperature above 400°F.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.011 to 0.015 inch
Fluid Pressure: 2,100psi
Conventional Spray :
Brush : Touch-up for small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 30 to 34%
4.2 Product Weight (ASTM D1475) : 1.10 to 1.14 Kg/L
4.3 Viscosity (ASTM D562) : 50 to 60 KU
4.4 Flash Point (ASTM D93 or D56) : 25°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 289 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12 Primer
Type of Coating : Epoxy Primer: Polyamide-Cured
Manufacturer : Saudi Industrial Paint Co.
Product Name : Siprime 215
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
(Refer to APCS-1B Primer Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 290 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-12 TOPCOAT
Type of Coating : Polyamide Epoxy Topcoat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipoxy-Shield 240
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960
(09-612-375)
(Refer to APCS-1A thru 1C Topcoat data sheet. Also, refer to APCS-12 of Saudi Aramco Engineering
Standard SAES-H-101 for application of aggregate).
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 291 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-17A
Type of Coating : Inorganic Zinc Primer; Solvent-Based
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipzinc 130
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
(Refer to APCS-1A/11A data sheet. Dry film thickness shall conform with APCS-17A of SAES-H-
101.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 292 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipzinc 180
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4.17 Kgs Liquid:
9.95 Kgs Zinc dust
2.3 Thinner : Sweet Water (for cleaning only)
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 1 day @ 25°C
16 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 107 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 293 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B Primer - Sipzinc 180 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum *
10°C 4 Hours 1 Day None
30°C 4 Hours 1 Day None
50°C 3 Hours 16 Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure sweet water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip size: 0.017 to 0.021 inch
Fluid Pressure: 2,100 psi
Conventional Spray and Pressure Vessel : Tip Size:
Atomizing Pressure 15 to 22 psi
Brush : Touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 59 to 61%
4.2 Product Weight (ASTM D1475) : 2.85 to 2.95 Kg/L
4.3 Viscosity (ASTM D562) : 75 to 85 KU
4.4 Flash Point (ASTM D93 or D56) : None
Approval Date: January 12, 2005
Replaces: April 1. 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 294 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19A
Type of Coating : Splash Zone Compound: Hand-Applied
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sip-Splash 640
SAP M/N (SAMS S/N) : 1000194524 (09-612-345)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 1:1 by weight
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : None
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : 2 hours @ 25°C
½ hour @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 2,540 micrometers
3.3 Typical Dry Film Thickness Per Coat : 2,540 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 295 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19A – Sip-Splash 640 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 1 Day N/A N/A Immediately
30°C 1 Day N/A N/A Immediately
50°C 10 Hours N/A N/A Immediately
3.7 Recommended Equipment
Airless Spray : Not recommended
Conventional Spray : Not recommended
Tower/Putty Knife : Recommended
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.57 to 1.62 Kg/L
4.3 Viscosity (ASTM D562) : Over 140 KU (Thixotropic)
4.3 Flash Point (ASTM D93 or D56) : more than 95°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 296 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A
Type of Coating : Fiberglass Reinforced Epoxy: Hand Lay-Up
Manufacturer : Huntsman Advanced Materials (Represented by SIPCO in-kingdom)
Product Name : Araldite® Laminating System (Resin: Araldite GY 257 + Curing Agent
: Aradur® 830 & Aradur
® 850
SAP M/N (SAMS S/N) : None
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 3
2.2 Mixing Ratio : Base:Hardener by weight
(Araldite® GY257): (Aradur
® 830): (Aradur
® 850) : 100: 52:8
Note on mixing ratio :
Reactivity of the system can be adjusted to desired “Pot Life”
based on the ambient temperature. In such case the ratio of
Aradur® 830 & Aradur® 850 can be adjusted accordingly.
2.3 Thinner : N/A
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life (this is a function of mixing ratio adopted for hardeners hence you can achieve
the flexibility of desired pot life by adjusting the mixing ratio of Aradur® 830 &
Aradur® 850 as under)
Formulation No. 1 2 3
Araldite® GY 257 100 100 100
Aradur® 830 52 45 0
Aradur® 850 8 15 60
Potlife (TECAM) of 1000 gm mix @ 200C 225 Min 107 Min 24 Min
1000 gm mix @ 400C 70 Min 45 Min 15 Min
3. Surface Preparation and Coating Application
3.1 Maximum Allowable Substrate Temperature : 55°C
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 297 of 398
3.2 Surface Preparation
Surface is degreased and cleaned to ensure the removal of all oil, grease, salts, dirt and
other surface contaminants prior to further surface preparation.
Prior to the start of the blasting work, all the surface irregularities including weld
spatters, weld fluxes, rough capping etc. shall be removed or smoothed using
mechanical tools.
Area to be coated is abrasive blasted to clean metal, (Swedish Standard, SIS
0.55.001967: SA 2 1/2), with a depth of pattern from 50 – 120 microns. Vacuum clean
the substrate to remove all dust and loose particles prior to recoating.
3.3 Prime coating
Priming shall take place immediately after surface preparation (i.e., directly after
blasting and before oxidation). The abrasive blasted area is protected with a thin layer
of conservative primer; SIPRIME 215 thinned maximum 30 % with Thinner 740. The
dry film thickness of the primer must not exceed 30 microns, as it is imperative to
preserve the rough pattern of the abrasive blasting in order to ensure the best possible
adhesion between primer and laminate. Too thin a coat must also be avoided, as it
would lead to flash rusting before the laminate can be applied.
3.4 Caulking/ Smoothing Edges
All sharp edges are smoothed and all sharp corners filleted with putty made up by
mixing the Araldite® GY 257 / Aradur
® 830 / Aradur
® 850 laminating system with
thixotropic agent such as Aerosil 200 or Cabosil. This is absolutely vital, as no laminate
can drape/coat over sharp edges or into sharp corners. In the corners, apply excess of
putty and give shape with rounded spatula. Once cured, roughen putty to ensure
adhesion of laminate or sprinkle some washed silica sand on the wet surface to ensure
mechanical bonding of the next layer of the coating system.
Caulking shall be applied on all sharp edges and into corners, mainly between shell and
floor, between floor plates, in and around sumps, around connection between pipes and
hull, and around support pipes.
For the area between the shell and the floor, the amount of filler will determine the
sharpness of the turn. The sharper the turn, the more difficult it would be to construct a
laminate that is free of wrinkles and air bubbles. Hence, sharp turns should be avoided.
Use minimal epoxy filler as necessary to make the turn. A throat of approximately 5 cm
is usually adequate.
Caulking between the floor plates shall preferably be applied directly before lamination,
and while the epoxy caulking material is not completely cured, lamination on the floor
can proceed.
Application onto partly cured caulking will ensure optimal adhesion. Fully cured
caulking or coating must always be roughened to ensure optimal adhesion of the next
coat.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 298 of 398
In floating roof tanks, steel landing plates should be inserted under the support legs.
Landing plates(06 mm thick) are first prepared by blasting and priming on both sides,
and the lamination system is applied to one side only, and while still wet, washed sand
is sprinkled on the perimeter to provide for subsequent mechanical bond.
Work will start on the landing legs in the following manner:
1. The welds on the striker plate are caulked.
2. 2 or 3 hydraulic jacks are placed around the leg or timer spreaders, clear of the area
to be lined, and the roof is lifted about 15 cm. The pin holding the leg is removed,
and the leg is raised.
3. The area under the leg is cleaned with 80 disc grinder and removed of all dust and
contaminants.
4. The lining is applied so it extends 10 cm from the landing plate. The lining should
be resin rich in the center.
5. The prepared plate is placed, laminate side up, and forced slightly in the wet
laminate. The system is allowed to set, the leg is lowered, the pin replaced and the
jacks are released.
6. Any gaps between the landing plate and the striker plate should be filled with epoxy
caulking material.
3.5 Lamination
Onto rough conservation primed surface that is free of flash rusting and contamination.
1. A batch of Araldite® GY 257 / Aradur
® 830 / Aradur
® 850 laminating system is
mixed. Batch should preferably not exceed a total of 20 kg, in view of the pot life.
Immediately after mixture each batch is applied by paint roller onto the primed
surface. Start with a part of the vertical surface and then pass on to the adjoining
floor area. On vertical areas, add about 2 % of Aerosil 200 / Cabosil to the
laminating mix. Mix properly with an electric mixer, avoid air inclusion.
2. Immediately after this first application of the liquid system, place one layer of glass
mat (450 gm / m²) onto it and work the resin mix well through the glass mat, using
a metal disk or other laminating roller. This is to avoid entrapping air in the
laminate. An overlapping of approximately 5 cm between mat and strips gives
optimal results.
3. Onto the first layer of glass mat immediately apply a second layer of glass mat
according to steps 1 and 2.
4. Immediately after applying the second laminate layer, cover it with a surfacing
tissue(25-30 gm / m²) and work it gently into the wet laminate, using a metal disc
roller. Surfacing tissue is to prevent glass fibers of the mat from protruding through
the surface coat (see step 5).
5. After this last layer has cured to a tacky stage, roll on an ultimate abundant surface
or glaze coat of Araldite® GY 257 / Aradur® 830 / Aradur® 850 laminating system.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 299 of 398
6. Observe recoating intervals as detailed below.
Formulation No. 1 2 3
Araldite® GY 257 100 100 100
Aradur® 830 52 45 0
Aradur® 850 8 15 60
Recoating interval in hours (Min-Max) to achieve ideal interlayer
adhesion. After max time has elapsed, coat must be roughened
(sandpaper) to assure adhesion.
@ 200C 65% Relative Humidity (Duration in Hours) 20
to
40
14
to
30
6 to
12
@ 400C 65% Relative Humidity (Duration in Hours) 7 to
15
4 to
9
1.5
to 3
Important Notes :
Do not apply surface or glaze/gel coat before layer has cured to a tacky stage, otherwise surfacing tissue will float up.
Allow the whole laminating lining to cure thoroughly for at least 3 days before refilling the tank.
3.6 Lamination Application Sequence
Apply a generous amount of Araldite® GY 257 / Aradur
® 830 / Aradur
® 850 laminating
system (500 microns wet) on to primed steel surface, as evenly as possible.
Apply one layer of 450 gm/m² fiberglass chopped strand mat (CSM) onto the wet epoxy
mix.
Embed fully to remove wrinkles and roll with steel roller to remove trapped air. Add
resin where required and consolidate with steel roller.
Apply a second generous coating of Araldite® GY 257 / Aradur
® 830 / Aradur
® 850
laminating system.
Apply the second layer of 450 gm/m² fiberglass CSM with a 50 % of the nominal width
of the mat overlap on the previous layer in order to achieve a 2 layer system. Care
should be taken to ensure the second layer is overlapping the previous one with
untrimmed edge.
Repeat smoothing and rolling as in step above and add Araldite® GY 257 / Aradur
® 830
/ Aradur® 850 laminating system if required.
Lay a surfacing tissue of 25-30 gm/m² in such a manner that it overlaps the mat without
aligning with mat edge, and ensuring that the strands of mat are not exposed or
protruding at the laminating surface.
Repeat smoothing and rolling as step above.
Let laminate cure to a tacky stage before applying the gel coat (observe recoating
intervals).
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 300 of 398
Defect repair
Air inclusion should be cut out to a tapered edge, sanded around, and application of mat
and tissue carried out with an overlap of 50 mm on the sound laminate. If the over
coating interval cannot be observed then the overlap should be of 100 mm.
Overlaps of less than 30 mm should be patched with a strip 100 mm wide.
Areas where the laminate does not appear to be resin rich should be patched with an
extra layer of surface tissue and resin.
3.7 Recommended materials/tools
Laminate resin:
Araldite® GY 257/ SIPTANK 263( A ) – Base Resin-
Hardener Aradur® 830( B ) – Slow reacting
Hardener Aradur® HY 850( C ) – Highly reacting
Cab O Sil / Aer O Sil
Glass Matt 450 gm/ m²
Fiberglass Mat: Vetrotex® M4 40 P3 (Emulsion bonded) by Vetrotex International,
Scandinavian Glass fiber (MK 12) by Owens Corning
Surfacing Tissue: Fiberil® T 1773; 30-40 g/m²; Manufactured by Carl Freudenberg
Measuring Mug 1 liter and 500 ml capacity – 4 piece each
Empty and clean drums (20 liter) for mixing of the laminating system
Electric hand drill with mixing propellers
Stiff two-inch paint brushes to spread laminating system into corners
Complete paint rollers (20 cm long) to spread laminating system
Straight spatula to apply putty over edges
Rounded spatula to apply putty in corners (filleting)
Metal disk roller to work the glass matt into the laminating system
Short metal disc roller to work laminating into corners
Flexible metal disk roller to work the laminate onto strongly curved areas
Pneumatic grinder with 80-disc paper
3.8 On the prepared & primed surface Painting Sequence would be
Apply 500 microns of Araldite® GY 257 / Aradur
® 830 / Aradur
® 850 laminating
system
Apply layer of 450 gm/ m² fiber matt- repeat rolling process
Apply 500 microns of Araldite® GY 257 / Aradur
® 830 / Aradur
® 850 laminating system
Apply layer of 450 gm/ m² of fiber matt – repeat rolling process
Apply 500 microns of Laminating Resin
Apply layer of 30 gm surfacing tissue – repeat rolling process
Apply 300 microns of Lam Araldite® GY 257 / Aradur
® 830 / Aradur
® 850 laminating
system
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 301 of 398
A minimum overlap between adjacent strips of mat of 5 cm (2 inches) is required.
Surfacing tissue should encapsulate both fiber matt and should always be 5 cm longer.
This is true for shell plate edge also. During application of fiber matt on shell, resin sag
would be sometimes observed here another layer of resin might have to be applied.
Foreman should observe and check these areas again after 20 minutes.
Observe recoating intervals as shown in the table under point no. 3.4
After maximum time has elapsed; coat must be roughened (sand paper) to assure
adhesion.
When the glass fibre laminate system is hard (usually after 24 hours) apply one seal
coat of laminating resin system to a typical wet film thickness of 300 microns.
3.9 Final Inspection
Visual
Visually inspect the whole area and identify and mark any areas of dry matting or
contamination of any kind and any other defects.
Total Dry Film Thickness
The overall thickness should correspond to a ratio of resin/glass of 3:1 by weight. A
double layer plus surfacing tissue and gel coat should typically be min. 2500 microns.
Discontinuity Test
Check for holidays or porosities using high voltage spark tester equipment. Suggested
voltage as a rule of thumb is 100 V for 25 microns or as per NACE RPO 0188,
Standard recommended practice, Discontinuity Testing of Protective Coatings.
In the beginning we recommend first section should be tested for holiday prior to
application of gel coat, to ensure personnel’s as to application tactic and to find out if
there is any pinholes/ dry areas.
If any holiday or dry matt areas are found then follow the repair procedure.
3.10 Repair Procedure
Pinholes
Grind back the pinhole and minimal surrounding areas to bare metal substrate with a
tapered edge. Apply lamination system as explained above.
Dry Mat Areas After identification of the repair area, remove the defective material back to the bare
metal substrate by grinding. Grind back the laminate around the repair with a tapered
edge.
Remove dust and contamination from the repair area with a solvent wipe. Apply the
repair laminate system as in accordance with step 1, 2 and 3.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 302 of 398
Glass protruding through Laminate (Wicking)
Fibreglass protrusion should be trimmed to the surface of the laminate and the
surrounding area abraded approx. 100 mm in diameter and then touched up with a
sealer coat of laminating system.
Burnt areas (Fiberglass system) due to welding
After marking this area, repair similar to dry matt area.
4. Drying Time
Substrate Recoat Interval To Immersion
Temperature To Handle Minimum Maximum Water Buried
10°C 36 hours N/A 72 hours 18 Days N/A
30°C 24 hours N/A 38 hours 7 Days N/A
50°C 10 hours N/A 12 hours 3 Days N/A
5. Recommended Equipment
Conventional spray and hand application only.
6. Technical Properties
No. Parameters Standards Reading
4.1 Volume Solids ASTM D2697 100%
4.2 Product Weight ASTM D1475 1.10 to 1.12 Kg/L
4.3 Viscosity at 25°C for Mix of 100 : 45 : 15 ISO 9371 B 1400 mPa
4.4 Flash Point for Araldite® GY 257 ISO 2719 C. 120°C
Flash Point for Aradur® 830 ISO 2719 > 190°C
Flash Point for Aradur® 850 ISO 2719 C. 152°C
Approval Date: November 19, 2005
Replaces New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 303 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A
Type of Coating : Epoxy Coating for Damp Surfaces
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipoxy-Shield 275
SAP M/N (SAMS S/N) : Primer 1000194560 (09-612-352) or 1000195239 (09-612-459),
Topcoat 000194565 (09-612-357), 1000194568 (09-612-358),
1000194590 (09-612-359), 1000195273 (09-612-462), 1000195277
(09-612-465) or 1000195314 (09-612-467)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base: hardener) by volume : 3:1
2.3 Thinner : 740
SAP M/N (SAMS S/N) : 1000198471 (09-738-300)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : ¼ hour @ 25°C
2.6 Pot Life (mixture) : 5 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 167 micrometers
3.3 Typical Dry Film Thickness Per Coat : 150 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 36 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 304 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A – Sipoxy-Shield 275 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum *
10°C 10 Hours 10 Hours 2 Months
30°C 2 Hours 3.5 Hours 35 Days
50°C 1 Hour 2 Hours 7 Days
Maximum recoating time is unlimited with all temperatures as long as the substrate is
washed with SIPCO's Devprep 88 or Sipclean 615 (diluted to 50% with water) followed
by sweet water rinse.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.019 to 0.025 inch
Fluid Pressure: 2,100 psi
Conventional Spray and Pressure Vessel : Not recommended
Brush : For small areas and stripe coat only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 88 to 92%
4.2 Product Weight (ASTM D1475) : 1.53 Kg/L
4.3 Viscosity (ASTM D562) : KU
4.4 Flash Point (ASTM D93 or D56) : 38°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 305 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-23
Type of Coating : Bituminous
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipflex 635
SAP M/N (SAMS S/N) : 1000194097 (09-611-754) or 1000194111 (09-611-757)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : T-902 / T-710
(0104; Mineral Spirit)
SAP M/N (SAMS S/N) : None
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : N/A
2.6 Pot Life (mixture) : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 476 micrometers
3.3 Typical Dry Film Thickness Per Coat : 250 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 21.0 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 306 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-23 – Sipflex 635 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 2 Days 1 Day None 5 Days
30°C 1 Day 18 Hours None 5 Days
50°C 1 Day 18 Hours None 5 Days
3.7 Recommended Equipment
Airless Spray : Tip Size 0.017 to 0.023 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Not recommended
Tower/Putty Knife : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 50.0 to 54.0%
4.2 Product Weight (ASTM D1475) : 1.20 to 1.22 Kg/L
4.3 Viscosity (ASTM D562) : 120 to 130 KU (Thixotropic)
4.3 Flash Point (ASTM D93 or D56) : 21°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 307 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26
Type of Coating : Epoxy Mastic Coating (Primer/Topcoat)
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipoxy-Shield 285
SAP M/N (SAMS S/N) : 1000194381 (09-612-330), 1000194386 (09-612-331), 1000194401
(09-612-332), 1000194407 (09-612-333), 1000194420 (09-612-334),
1000194427 (09-612-335) or 1000194471 (09-612-336)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (base : hardener) by volume : 3 : 1
2.3 Thinner : T-730
SAP M/N (SAMS S/N) : 1000198487 (09-738-420)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : 15 Minutes @ 25°C
2.6 Pot Life (mixture) : 4 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 60°C
3.2 Typical Wet Film Thickness Per Coat : 139 to 222 micrometers
3.3 Typical Dry Film Thickness Per Coat : 125 to 200 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 36 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 308 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26 – Sipoxy-Shield 285 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 18 Hours 12 Hours 2 Months
30°C 8 Hours 3 Hours 35 Days
50°C 6 Hours 2 Hours 4 Days
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.017 to 0.025 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Not recommended
Brush : For small areas and stripe only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 88 to 92%
4.2 Product Weight (ASTM D1475) : 1.57 Kg/L
4.3 Viscosity (ASTM D562) : 130 to 140 KU
4.4 Flash Point (ASTM D93 or D56) : 38°C
Approval Date: January 12, 2005
Replaces: April 1, 2002
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 309 of 398
Manufacturer-Approved Saudi Aramco Data Sheet
APCS-26T TOPCOAT
Type of Coating : Polyurethane Topcoat
Manufacturer : Saudi Industrial Paint Co.
Product Name : Sipthane 360
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-
612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
(Refer to APCS-26 data sheet for the primer and to polyurethane of APCS-1D/E/F data sheet for the
topcoat.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 310 of 398
9 Shell Chemicals – Approved Products
APCS-20A Resin Epikote 816 Epikote Resin Laminate System
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 311 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A
Type of Coating : Fiberglass Reinforced Epoxy Hand-Applied
Manufacturer : Global Suhaimi Company
Product Name : Epikote Resin Laminate System (Resin Epikote 816 + Curing Agent
Epikote 816) - Manufactured by Shell Chemicals
SAMS S/N : None
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio (Resin to Curing Agency by Weight) : 2 : 1
2.3 Thinner : N/A (clean up only)
SAMS S/N : None
2.4 Thinning Requirements : Nil
2.5 Induction Time : 10 Minutes
2.6 Pot Life (Epikote 816 + Epikure 160) : 45 minutes @ 25°C
25 minutes @ 40°C
3. Application
3.1 For Corrosion Protection
3.1.1 Apply epoxy resin @ a thickness of 500 to 625 micrometers onto the primed
surface.
3.1.2 Apply one layer of 450 g/m² fiberglass mat to the wet resin.
3.1.3 Smooth by hand to remove wrinkles, then roll with steel roller to remove
trapped air and ensure a bond to the substrate.
3.1.4 Apply 500 micrometers of epoxy resin mat to ensure a resin rich finish.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 312 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A - Epikote 816 (Cont'd)
3.2 For Strengthening
3.2.1 Apply epoxy resin @ a thickness of 500 to 625 micrometers onto the primed
surface.
3.2.2 Apply one layer of 450 g/m² fiberglass mat to wet resin.
3.2.3 Smooth by hand to remove wrinkles and roll with steel rollers to remove
trapped air and ensure a good bond with the resin.
3.2.4 Apply second coat of resin @ a thickness of 625 to 750 micrometers.
3.2.5 Apply one layer of 680 grams woven roving, and repeat smoothening and
rolling.
3.2.6 Apply third coat of resin @ a thickness of 750 to 875 micrometers.
3.2.7 Apply one layer of 450 g/m² fiberglass mat, and repeat smoothening and
rolling.
3.2.8 Apply fourth coat of resin @ a thickness of 250 micrometers, and smooth out to
give a resin rich finish.
3.3 Maximum Allowable Substrate Temperature : 40°C
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum Full Cure
10°C 20 Hours N/A N/A 10 Days
30°C 5 Hours N/A N/A 7 Days
50°C 3 Hours N/A N/A 5 Days
Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure sweet water hosing and allow to dry.
3.7 Recommended Equipment
Hand application only.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 313 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-20A - Epikote 816 (Cont'd)
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.12 Kg/L
4.3 Viscosity (ASTM D562) : 106 KU
4.4 Flash Point (ASTM D93 or D56) : 100°C
Approval Date: October 24, 1992
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 314 of 398
10 Sigma – Approved Products
APCS-1A SigmaZinc 158 Inorganic Zinc Primer: Solvent-Based
Silguard SC 7550 Inorganic Zinc Primer: Water-Based
Sigmacover 410 Epoxy Topcoat
APCS-1B Sigmacover 410 (Alu) Epoxy Primer
Sigmacover 410 Epoxy Topcoat
APCS-1C SigmarZinc 102HS Organic Zinc Rich Primer
Sigmacover 410 Epoxy Topcoat
APCS-1D (Use APCS-1A as primer and intermediate coat.)
Sigmadur Gloss 7528 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1E (Use APCS-1B as primer and intermediate coat.)
Sigmadur Gloss 7528 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-1F (Use APCS-1C as primer and intermediate coat.)
Sigmadur Gloss 7528 Polyurethane Topcoat: Yellow/White
Gray/Green/Red
APCS-2A Phenguard 930 (Colturiet Phenguard Primer 7409) Epoxy Primer: Off White
Phenguard 940 (Colturiet Phenguard Finish 7436) Epoxy Topcoat: Gray
APCS-2B Phenguard 930 (Colturiet Phenguard Primer 7409) Epoxy Primer: Off-White
Phenguard 940 (Colturiet Phenguard Finish 7436) Epoxy Topcoat: Gray
APCS-2C Phenguard 930 (Phenguard Primer 7409) Epoxy Primer: Off White
Phenguard 935 (Phenguard Coating 7435) Epoxy Intermediate Coat: Pink
Phenguard 940 (Phenguard Finish 7436) Epoxy Topcoat: Gray
APCS-3 Sigma C-200a Coal Tar Coal Tar Epoxy: Black/Reddish Brown
APCS-4 Sigmarine 24 (Zinc Chromate SA40) Primer: Red Brown
Sigma Aluminium Paint SA35 Aluminum Topcoat
APCS-6 Sigmarine 24 (Zinc Chromate SA40) Primer: Red Brown
Sigma Enamel SA21 Alkyd Topcoat: Various Colors
APCS-10 Vikote 63 (Emaline 3000) Bituminous Coating : Black: Buried
Vikote 63 (Emaline 3000) Sigma Emaline 3000 7102 Bituminous Coating: Black:
Immersion
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 315 of 398
Sigma – Approved Products (Cont'd)
APCS-11A SigmaZinc 158 Inorganic Zinc Primer: Solvent-Based
Silguard SC 7550 Inorganic Zinc Primer: Water-Based
Sigmatherm 540 High Temp. Silicone Coating: Aluminum Topcoat
APCS-11B Sigmatherm 540 High Temp. Silicone Coating; Aluminum,
Self-Priming
APCS-12 Sigmacover 410 (Alum) Epoxy Primer
Sigmacover 410 Epoxy Topcoat: Red/Gray/Yellow
APCS-17A SigmaZinc 158 Inorganic Zinc Silicate: Solvent-Based
APCS-17B Sigma Silguard SC 7550 Inorganic Zinc Silicate: Water-Based
APCS-19B Sigmaguard 1091 Splash Zone Compound: Spray-Applied;
Green
APCS-22A Sigmacover 410 (Alu) Epoxy Primer: Redbrown/Green
Sigmacover 410 Epoxy Topcoat: Gray/Yellow/Black
APCS-26 Sigmacover 410 (Alu) Epoxy Mastic: Aluminum, White, Orange, Red,
Yellow, Gray, Black
APCS-26T Sigmacover 410 (Alu) Epoxy Primer
Sigmadur Gloss 7528 Polyurethane Topcoat
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 316 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : SigmaZinc 158
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 9 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 81:19 (binder:powder)
by volume
2.3 Thinner : Sigma 90-53
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 10% by volume
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 8 hours @ 25°C
3 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 100 to 115 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 to 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Maximum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 317 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer – SigmaZinc 158 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 1 Hours 18 Hours None
30°C 1/2 Hour 6 Hours None
50°C 1/2 Hour 4 Hours None
Note: Relative humidity should be 50% or more for coating to cure.
* Overcoat with Sigmacover 410.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.019 to 0.025 inch N/A
Fluid Pressure: 1,280 to 1,700 psi
Conventional Spray : Nozzle Size: 2 mm
Nozzle Pressure: 43 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 63 to 67%
4.2 Product Weight (ASTM D1475) : 2.3 Kg/L
4.3 Viscosity (ASTM D562) : (16 to 20 seconds, DIN 4 cup)
4.4 Flash Point (ASTM D93 or D56) : 16.5°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 318 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigma Silguard SC 7550
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 63:37 (base:hardener)
by volume
2.3 Thinner : Nil
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 8 hours @ 25°C
6 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 115 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 319 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A Primer - Sigma Silguard SC 7550 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 6 Hours 1 Day None
30°C 3 Hours 10 Hours None
50°C 1 Hour 4 Hours None
Note: Before overcoating, remove zinc salts if any.
* Overcoat with Sigmacover CM coating.
3.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : Nozzle Size: 2 mm
Nozzle Pressure: 50 to 75 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 3.05 to 3.15 Kg/L
4.3 Viscosity (ASTM D562) : (18 to 22 seconds)
4.4 Flash Point (ASTM D93 or D56) : 65°C
Approval Date: January 16, 2005
Replaces: October 22, 1996
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 320 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat
Type of Coating : Epoxy Topcoat: Polyamide-Cured
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmacover 410
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960
(09-612-375)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 80:20 (base:hardener)
by volume
2.3 Thinner : 91-92
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements : Up to 10% by volume
30 to 40 % for miscoat
2.5 Induction Time : Nil
2.6 Pot Life : 4 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 125 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 32 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 321 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1A/B/C Topcoat - Sigmacover 410 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 24 Hours 24 Hours None
30°C 6 Hours 6 Hours None
50°C 3 Hours 3 Hours None
* Overcoat with Sigmacover CM coating.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.018 to 0.021 inch
Fluid Pressure: 2,800 to 3,500 psi
Conventional Spray : Nozzle Size: 1.5 to 3 mm
Nozzle Pressure: 43 to 57 psi
Brushr and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 78 to 82%
4.2 Product Weight (ASTM D1475) : 1.5 to 1.9 Kg/L
4.3 Viscosity (ASTM D562) :(12 to 17 dPa.s depending on color)
4.4 Flash Point (ASTM D93 or D56) : 20°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 322 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B
Type of Coating : Epoxy Primer: Polyamide-Cured
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmacover Primer 410 (Alu)
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4:1 (base:hardener)
by volume
2.3 Thinner : 91-92
SAP M/N (SAMS S/N) : 1000198455 (09-738-280)
2.4 Thinning Requirements : 10% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 4 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 125 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 32 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 323 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1B Primer - Sigmacover Primer 410 (Alu) (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 24 Hours 24 Hours None
30°C 6 Hour 6 Hours None
50°C 3 Hour 3 Hours None
* Overcoat with Sigmacover CM coating.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.018 to 0.021 inch
Fluid Pressure: 2,800 to 3,500 psi
Conventional Spray : Nozzle Size: 1.5 - 2 mm
Nozzle Pressure: 43 - 57 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 78 to 82%
4.2 Product Weight (ASTM D1475) : 1.4 to 1.6 Kg/L
4.3 Viscosity (ASTM D562) : 14 to 16 dPa.s.
4.4 Flash Point (ASTM D93 or D56) : 20°C
Approval Date: August 16, 2008
Replaces: New
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 324 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C
Type of Coating : Zinc-Rich Primer
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : SigmZinc 102HS
SAP M/N (SAMS S/N) : 1000195348 (09-612-580), 1000195361 (09-612-590) or 1000195361
(09-612-590)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 80:20 (base:hardener)
by volume
2.3 Thinner : 91-92
SAP M/N (SAMS S/N) : 1000198449 (09-738-240)
2.4 Thinning Requirements : 5 to 10% by volume
2.5 Induction Time : Nil
2.6 Pot Life : 8 hours @ 20°C
1.5 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 75 to 150 micrometers
3.3 Typical Dry Film Thickness Per Coat : 50 to 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 325 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1C Primer – SigmaZinc 102HS (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 6 Hours 10 Hours Several months
30°C 1.5 Hours 4 Hours Several months
50°C 1 Hours 2 Hours Several months
* Overcoat with Sigmacover CM coating, provided the primer is free from
zinc salts and contamination.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.017 to 0.019 inch
Fluid Pressure: 2,130 psi
Conventional Spray : Nozzle Size: 1.8 to 2.2 mm.
Nozzle Pressure: 43 to 85 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 2.3 to 2.5 Kg/L
4.3 Viscosity (ASTM D562) : (5 to 6 dPa.s)
4.4 Flash Point (ASTM D93 or D56) : 30°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 326 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat
Type of Coating : Polyurethane Enamel Topcoat
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmadur Gloss 7528
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793
(09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
1. Storage
1.1 Shelf life, sheltered storage @ 35° C maximum : 2 years
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 88:12 (base:hardener)
by volume
2.3 Thinner : 21-06
SAP M/N (SAMS S/N) : 1000198479 (09-738-345)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : None
2.6 Pot Life : 4 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 72 micrometers
3.3 Typical Dry Film Thickness Per Coat : 40 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 22.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 327 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-1D/E/F Topcoat - Sigmadur Gloss 7528 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum *
10°C 8 Hours 8 Day None
30°C 5 Hours 5 Hours None
50°C 2 Hours 2 Hours None
* Before overcoating after exposure in a contaminated environment,
clean thoroughly by high pressure fresh water hosing and allow to dry.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.011 to 0.013 inch
Fluid Pressure: 2,800 psi
Conventional Spray : Tip Size: 1 to 1.5 mm
Atomizing Pressure: 43 to 57 psi
Brush and Roller : For small areas only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 54 to 58%
4.2 Product Weight (ASTM D1475) : 1.2 to 1.4 Kg/L
4.3 Viscosity (ASTM D562) : 6 to 8 dPa.s102 to 106 KU
4.4 Flash Point (ASTM D93 or D56) : 33°C
Note: Use either APCS-1A, 1B or 1C (see previous data sheets) as primer and intermediate coat, and
the dry film thickness should be in accordance with APCS-1D, 1E or 1F of SAES-H-101.
Approval Date: August16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 328 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2A
Type of Coating : Epoxy: Phenolic
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Phenguard 930 (Phenguard Primer 7409) / Phenguard 940 (Phenguard
Finish 7436)
SAP M/N (SAMS S/N) : 1000195232 (09-612-425) or 1000195235 (09-612-453)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 88:12 by volume
base:hardener
2.3 Thinner : 91-92
SAP M/N (SAMS S/N) : 1000198377 (09-738-140)
2.4 Thinning Requirements : Up to 10% by volume
2.5 Induction Time : 20 minutes @ 15°C
10 minutes @ 25°C
2.6 Pot Life : 3 hours @ 25°C
1.5 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 150 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 329 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2A – Phenguard 930 (7409) / Phenguard 940 (7436) (Cont'd)
3.6 Drying Time
Substrate Dry to Handle Ovecoat Interval To Immersion
Temperature and Walk-on Minimum Maximum (Minimum)
10°C 1.5 Days 3 Days 28 Days 14 Days
15°C 1.5 Days 2 Days 25 Days 11 Days
20°C 1 Day 1.5 Day 21 Days 9 Days
25°C 20 Hours 36 Hours 18 Days 8 Days
30°C 16 Hours 24 Hours 14 Days 7 Days
35°C 14 Hours 20 Hours 10 Days 6 Days
40°C 10 Hours 16 Hours 7 Days 6 Days
45°C 8 Hours 12 Hours 4 Days 4 Days
50°C 5 Hours 8 Hours 3 Days 4 Days
55°C 8 Hours 2 Days 2 Days
60°C 8 Hours 1 Day 1 Day
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.018 to 0.021 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Nozzle Size: 2 mm
Nozzle Pressure: 43 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 1.6 to 1.8 Kg/L
4.3 Viscosity (ASTM D562) : 102 to 123 KU
4.4 Flash Point (ASTM D93 or D56) : 24°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 330 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2B
Type of Coating : Epoxy: Phenolic
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Phenguard 930 (Phenguard Primer 7409) / Phenguard 940 (Phenguard
Finish 7436)
SAP M/N (SAMS S/N) : 1000195317 (09-612-518) or 1000195341 (09-612-546)
(See APCS-2A data sheet.)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 331 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2C
Type of Coating : Epoxy: Phenolic
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Phenguard 930 (Phenguard Primer 7409) / Phenguard 935 (Phenguard
Coating 7435) / Phenguard 940 (Phenguard Finish 7436)
SAP M/N (SAMS S/N) : 1000194295 (09-612-312), 1000194298 (09-612-313), 1000194352 (09-612-
314)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 88:12 by volume
base:hardener
2.3 Thinner : 91-92
SAP M/N (SAMS S/N) : 1000198377 (09-738-140)
2.4 Thinning Requirements : Up to 10% by volume
2.5 Induction Time : 20 minutes @ 15°C
10 minutes @ 25°C
2.6 Pot Life : 3 hours @ 25°C
1.5 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 150 micrometers
3.3 Typical Dry Film Thickness Per Coat : 100 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 3
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 332 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-2C –
Phenguard 930 (7409) / Phenguard 935 (Phenguard Coating 7435) / Phenguard 940 (7436)
(Cont'd)
3.6 Drying Time
Substrate Dry to Handle Ovecoat Interval To Immersion
Temperature and Walk-on Minimum Maximum (Minimum)
10°C 1.5 Days 3 Days 28 Days 14 Days
15°C 1.5 Days 2 Days 25 Days 11 Days
20°C 1 Day 1.5 Day 21 Days 9 Days
25°C 20 Hours 36 Hours 18 Days 8 Days
30°C 16 Hours 24 Hours 14 Days 7 Days
35°C 14 Hours 20 Hours 10 Days 6 Days
40°C 10 Hours 16 Hours 7 Days 6 Days
45°C 8 Hours 12 Hours 4 Days 4 Days
50°C 5 Hours 8 Hours 3 Days 4 Days
55°C 8 Hours 2 Days 2 Days
60°C 8 Hours 1 Day 1 Day
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.018 to 0.021 inch
Fluid Pressure: 2,100 psi
Conventional Spray : Nozzle Size: 2 mm
Nozzle Pressure: 43 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 1.6 to 1.8 Kg/L
4.3 Viscosity (ASTM D562) : 102 to 123 KU
4.4 Flash Point (ASTM D93 or D56) : 24°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 333 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3
Type of Coating : Coal Tar Epoxy
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigma C-200a Coal Tar
SAP M/N (SAMS S/N) : 1000194372 (09-612-318); 1000194375 (09-612-320)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 86:14 (base:hardener)
by volume
2.3 Thinner : Sigma 21-06 (Xylene)
SAP M/N (SAMS S/N) : 1000198441 (09-738-180)
2.4 Thinning Requirements : Up to 15% by volume
2.5 Induction Time : 15 minutes @ 20°C
2.6 Pot Life : 5 hours @ 25°C
1.5 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 256 micrometers
3.3 Typical Dry Film Thickness Per Coat : 200 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 31.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 334 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-3 - Sigma C-200a Coal Tar (Cont'd)
3.6 Drying Time
Substrate Dry to Handle Ovecoat Interval To Immersion
Temperature and Walk-on Minimum Maximum (Minimum)
5°C 2 Days 40 Days 30 Days
10°C 1 Day 1 Day 20 Days 24 Days
15°C 16 Hours 14 Days 14 Days
20°C 8 Hours 7 Days 10 Days
25°C 7 Hours 5 Days 8 Days
30°C 6 Hours 6 Hours 4 Days 5 Days
35°C 4 Hours 1.5 Days 4 Days
40°C 3 Hours 1 Day 4 Days
45°C 2 Hours 18 Hours 3 Days
50°C 4 Hours 1 Hour 12 Hours 3 Days
55°C 0.75 Hour 8 Hours 2 Days
60°C 0.50 Hour 6 Hours 2 Day
(Please see graphs in the Attachment.)
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.019 to 0.023 inch
Fluid Pressure: 2,500 psi to 2,700 psi
Conventional Spray : Nozzle Size: 0.059 to 0.118 inch
Nozzle Pressure: 28 to 57 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 77 to 79%
4.2 Product Weight (ASTM D1475) : 1.28 to 1.32 Kg/L
4.3 Viscosity (ASTM D562) : 130 to 160 poises
4.4 Flash Point (ASTM D93 or D56) : 26°C
Approval Date: January 16, 2005
Replaces: October 7, 2001
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 335 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4/6
Type of Coating : Zinc Chromate Primer
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmarine 24 (Zinc Chromate SA40)
SAP M/N (SAMS S/N) : 1000197976 (09-708-133) or 1000198011 (09-708-137)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : 20-05 (mineral spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 5% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 63 micrometers
3.3 Typical Dry Film Thickness Per Coat : 35 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 22.4 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 336 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4/6 - Sigmarine 24 (Zinc Chromate SA40) (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 12 Hours 1.5 Days None
30°C 2 Hours 16 Hours None
50°C 1 Hour 8 Hours None
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.017 to 0.019 inch
Fluid Pressure: 1,700 to 2,100 psi
Conventional Spray : Nozzle Size: 1.8 mm
Nozzle Pressure: 28 to 42 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 54 to 58%
4.2 Product Weight (ASTM D1475) : 1.3 to 1.5 Kg/L
4.3 Viscosity (ASTM D562) : 83 to 96 KU
4.4 Flash Point (ASTM D93 or D56) : 41°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 337 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4
Type of Coating : Aluminum-Pigmented Topcoat
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigma Aluminium Paint SA35
SAP M/N (SAMS S/N) : 1000196402 (09-686-354)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : 20-05 (mineral spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Nil (Airless Spray)
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 65 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 15.2 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 338 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-4 - Sigma Aluminium Paint SA35 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 3 Hours 1.5 Days None
30°C 1 Hour 14 Hours None
50°C ½ Hour 10 Hours None
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.017 to 0.019 inch
Fluid Pressure: 1,700 to 2,100 psi
Conventional Spray : Nozzle Size: 1.8 mm
Nozzle Pressure: 43 to 57 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 35 to 39%
4.2 Product Weight (ASTM D1475) : 0.98 to 1.05 Kg/L
4.3 Viscosity (ASTM D562) : 4 to 5 dPas
4.4 Flash Point (ASTM D93 or D56) : 38°C
Approval Date: May 8, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 339 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6
Type of Coating : High Gloss Enamel Topcoat
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigma Enamel SA21
SAP M/N (SAMS S/N) : 1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495
(09-630-763), 1000195532 (09-630-768), 1000195571 (09-630-769),
1000195577 (09-630-770), 1000195631 (09-630-771), 1000195637
(09-630-773), 1000195650 (09-630-785), 1000195683 (09-630-794),
1000195685 (09-630-796), 1000195687 (09-630-798), 1000195689
(09-631-301), 1000195742 (09-631-322), 1000195745 (09-631-450),
1000195747 (09-631-455), 1000195749 (09-631-462), 1000195801
(09-631-465), 1000195803 (09-631-590) or 1000195831 (09-631-645)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : 20-05 (mineral spirit)
SAP M/N (SAMS S/N) : 1000198474 (09-738-340)
2.4 Thinning Requirements : Up to 12% by volume
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 70 micrometers (for white)
3.3 Typical Dry Film Thickness Per Coat : 35 micrometers (for white)
3.4 Theoretical Coverage @ 25 Micrometers : 20 M²/L (for white)
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 340 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-6 - Sigma Enamel SA21 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 8 Hours 1 Day None
30°C 2 Hours 16 Hours None
50°C 1 Hour 10 Hours None
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.013 inch
Fluid Pressure: 1,700 psi
Conventional Spray : Nozzle Size: 1.8 to 2.0 mm
Nozzle Pressure: 43 to 57 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 47 to 50%
4.2 Product Weight (ASTM D1475) : 1.0 to 1.2 Kg/L
4.3 Viscosity (ASTM D562) : 85 to 103 KU (9 to 12 dPa.s.)
4.4 Flash Point (ASTM D93 or D56) : 38°C
Approval Date: January 16, 2005
Replaces: December 10, 1995
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 341 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-10
Type of Coating : Bituminous coating
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Vikote 63 (Emaline 3000)
SAMS S/N : 1000194025 (09-611-715), 1000194029 (09-611-720) or 1000194032
(09-611-725)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : 20-05
SAMS S/N : None
2.4 Thinning Requirements : 0 to 5% by volume
2.5 Induction Time : Nil
2.6 Pot Life : --
3. Application
3.1 Maximum Allowable Substrate Temperature : 40°C
3.2 Typical Wet Film Thickness Per Coat : 800 micrometers
3.3 Typical Dry Film Thickness Per Coat : 500 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 24.8 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 342 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-10 – Vikote 63 (Emaline 3000) (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 8 Hours 8 Hours None
30°C 5 Hours 5 Hours None
50°C 3 Hours 3 Hours None
Substrate temperature should be at least 3°C above dew point
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.023 inch
Fluid Pressure: 1,700-2,100 psi
Air Spray Nozzle Size: 2 – 3 mm
Nozzle Pressure: 43-57 psi
Brush and Roller : for touch up and spot repair only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 55 to 59%
4.2 Product Weight (ASTM D1475) : 1.2 Kg/L
4.3 Viscosity (ASTM D562) : 40 to 60 dPa.s.--
4.4 Flash Point (ASTM D93 or D56) : 39°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 343 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : SigmaZinc 158
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 9 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 81:19 (binder:powder)
by volume
2.3 Thinner : Sigma 90-53
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 10% by volume
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 8 hours @ 25°C
3 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 100 to 115 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 to 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Maximum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 344 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Primer – SigmaZinc 158 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 1 Hours 18 Hours None
30°C 1/2 Hour 6 Hours None
50°C 1/2 Hour 4 Hours None
Note: Relative humidity should be 50% or more for coating to cure.
* Overcoat with Sigmacover 410.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.019 to 0.025 inch N/A
Fluid Pressure: 1,280 to 1,700 psi
Conventional Spray : Nozzle Size: 2 mm
Nozzle Pressure: 43 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 63 to 67%
4.2 Product Weight (ASTM D1475) : 2.3 Kg/L
4.3 Viscosity (ASTM D562) : (16 to 20 seconds, DIN 4 cup)
4.4 Flash Point (ASTM D93 or D56) : 16.5°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 345 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigma Silguard SC 7550
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 63:37 (base:hardener)
by volume
2.3 Thinner : Nil
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 8 hours @ 25°C
6 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 115 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 346 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Primer - Sigma Silguard SC 7550 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 6 Hours 1 Day None
30°C 3 Hours 10 Hours None
50°C 1 Hour 4 Hours None
Note: Before overcoating, remove zinc salts if any.
* Overcoat with Sigmacover CM coating.
3.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : Nozzle Size: 2 mm
Nozzle Pressure: 50 to 75 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 3.05 to 3.15 Kg/L
4.3 Viscosity (ASTM D562) : (18 to 22 seconds)
4.4 Flash Point (ASTM D93 or D56) : 65°C
Approval Date: January 16, 2005
Replaces: October 22, 1996
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 347 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A
Type of Coating : Silicone Topcoat
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmatherm 540
SAP M/N (SAMS S/N) : 1000196488 (09-687-325)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 6 months
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : 21-06 (Cleaning Only)
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : None
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 56 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 18 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 348 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11A Topcoat - Sigmatherm 540 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 4 Hours 1.5 Days None
30°C 1 Hour 16 Hours None
50°C ½ Hour 10 Hours None
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.015 to 0.017 inch
Fluid Pressure: 1,500 to 1,700 psi
Conventional Spray : Nozzle Size: 1.5 – 2mm
Nozzle Pressure: 43 – 57 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 43 to 47%
4.2 Product Weight (ASTM D1475) : 1.1 Kg/L
4.3 Viscosity (ASTM D562) : (16 to 18 seconds DIN cup #4)
4.4 Flash Point (ASTM D93 or D56) : 26°C
5. Special Instruction: A minimum temperature of 200°C is needed to obtain sufficient cure.
Approval Date: May 7, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 349 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B
Type of Coating : Silicone
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmatherm 540
SAP M/N (SAMS S/N) : 1000196502 (09-687-330)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 6 months
2. Mixing
2.1 No. of Components : 1
2.2 Mixing Ratio : N/A
2.3 Thinner : 21-06 (Cleaning Only)
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : None
2.5 Induction Time : N/A
2.6 Pot Life : N/A
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 56 micrometers
3.3 Typical Dry Film Thickness Per Coat : 25 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 18 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 350 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-11B - Sigmatherm 540 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 4 Hours 1.5 Days None
30°C 1 Hour 16 Hours None
50°C ½ Hour 10 Hours None
3.7 Recommended Equipment
Airless Spray : (Not advisable)
Tip Size: 0.015 to 0.017 inch
Fluid Pressure: 1,500 to 1,700 psi
Conventional Spray : Nozzle Size: 1.5 – 2mm
Nozzle Pressure: 43 – 57 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 45 + 2%
4.2 Product Weight (ASTM D1475) : 1.1 Kg/L
4.3 Viscosity (ASTM D562) : (16 to 18 seconds DIN cup #4)
4.4 Flash Point (ASTM D93 or D56) : 26°C
5. Special Instruction: A minimum temperature of 200°C is needed to obtain sufficient cure.
Approval Date: May 7, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 351 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Primer
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmacover 410 (Alum)
SAP M/N (SAMS S/N) : 1000194626 (09-612-362)
(Refer to APCS-1B Primer Data Sheet)
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 352 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-12
Type of Coating : Epoxy Topcoat
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmacover 410
SAP M/N (SAMS S/N) : 1000194629 (09-612-364), 1000194797 (09-612-369) or 1000194960
(09-612-375)
(Refer to APCS-1B Topcoat Data Sheet. Also, refer to APCS-12 of Saudi Aramco Engineering
Standard SAES-H-101 for application of aggregate).
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 353 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A
Type of Coating : Inorganic Zinc Primer: Solvent-Based
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : SigmaZinc 158
SAP M/N (SAMS S/N) : 1000194146 (09-611-958)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 9 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 81:19 (binder:powder)
by volume
2.3 Thinner : Sigma 90-53
SAP M/N (SAMS S/N) : 1000198445 (09-738-220)
2.4 Thinning Requirements : Up to 10% by volume
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 8 hours @ 25°C
3 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 100 to 115 micrometers
3.3 Typical Dry Film Thickness Per Coat : 65 to 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Maximum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 354 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17A Primer – SigmaZinc 158 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 1 Hours 18 Hours None
30°C 1/2 Hour 6 Hours None
50°C 1/2 Hour 4 Hours None
Note: Relative humidity should be 50% or more for coating to cure.
* Overcoat with Sigmacover 410.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.019 to 0.025 inch N/A
Fluid Pressure: 1,280 to 1,700 psi
Conventional Spray : Nozzle Size: 2 mm
Nozzle Pressure: 43 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 63 to 67%
4.2 Product Weight (ASTM D1475) : 2.3 Kg/L
4.3 Viscosity (ASTM D562) : (16 to 20 seconds, DIN 4 cup)
4.4 Flash Point (ASTM D93 or D56) : 16.5°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 355 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B
Type of Coating : Inorganic Zinc Primer: Water-Based
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigma Silguard SC 7550
SAP M/N (SAMS S/N) : 1000194182 (09-611-969)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 63:37 (base:hardener)
by volume
2.3 Thinner : Nil
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : Nil
2.6 Pot Life (mixture) : 8 hours @ 25°C
6 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 115 micrometers
3.3 Typical Dry Film Thickness Per Coat : 75 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 26 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 356 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-17B Primer - Sigma Silguard SC 7550 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 6 Hours 1 Day None
30°C 3 Hours 10 Hours None
50°C 1 Hour 4 Hours None
Note: Before overcoating, remove zinc salts if any.
* Overcoat with Sigmacover CM coating.
3.7 Recommended Equipment
Airless Spray : N/A
Conventional Spray : Nozzle Size: 2 mm
Nozzle Pressure: 50 to 75 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 64 to 68%
4.2 Product Weight (ASTM D1475) : 3.05 to 3.15 Kg/L
4.3 Viscosity (ASTM D562) : (18 to 22 seconds)
4.4 Flash Point (ASTM D93 or D56) : 65°C
Approval Date: January 16, 2005
Replaces: October 22, 1996
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 357 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19B
Type of Coating : Splash Zone Compound - Spray-Applied
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmaguard 1091
SAP M/N (SAMS S/N) : 1000194520 (09-612-339)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 6 months
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 85:15 (base:hardener)
by volume
2.3 Thinner : N/A (90-53 for cleaning)
SAP M/N (SAMS S/N) : N/A
2.4 Thinning Requirements : N/A
2.5 Induction Time : N/A
2.6 Pot Life : 2 hours @ 20°C
1 hour @ 30°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 3,000 micrometers
3.3 Typical Dry Film Thickness Per Coat : 3,000 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 40 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 358 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-19B - Sigmaguard 1091 (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum To Immersion
10°C 2 Days 3 days 7 Days 12 Days
30°C 24 Hours 1 day 4 Days 4 Days
50°C 9 Hours 1 day 2 Days 3 Days
Minimum recoating times with solven based paints.
Recoating with solvent free products can be done wet-in-wet or after 1 day.
3.7 Recommended Equipment
Airless Spray: N/A (Low ratio, air assisted is an option)
Conventional Spray: Displacement pump like carrousel or "Bredel"
pumps. Nozzle orifice 4 to 5 mm, and nozzle
pressure @ 57 to 85 psi
Pressure vessel with bottom outlet and
pressure lid. Nozzle orifice @ 4 to 5 mm and
nozzle pressure @ 57 to 85 psi
Hopper gun 40-60 psi.Rough finish may be
flattened using (hairless, flat) plastic roller or
trowel wetted with Sigma Thinner 20-05.
Trowel: Acceptable. May be flattened using (hairless,
flat) plastic roller or trowel wetted with Sigma
Thinner 20-05
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 100%
4.2 Product Weight (ASTM D1475) : 1.95 to 2.05 Kg/L
4.3 Viscosity (ASTM D562) : N/A
4.4 Flash Point (ASTM D93 or D56) : 65°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 359 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A
Type of Coating : Polyamide Cured Epoxy Primer
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmacover 410 Aluminium
SAP M/N (SAMS S/N) : 1000194560 (09-612-352) or 1000195239 (09-612-459)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4:1 (base:hardener) by volume
2.3 Thinner : 91-92
SAP M/N (SAMS S/N) : 1000198471 (09-738-300)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life : 4 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 200 micrometers
3.3 Typical Dry Film Thickness Per Coat : 160 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 32 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 360 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Primer - Sigmacover 410 Aluminium (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 24 Hours 24 Hours None
30°C 6 Hour 6 Hours None
50°C 3 Hour 3 Hours None
In cases of exposure to direct sunlight or when the surface is contaminated, it is
recommended that the surface be cleaned and roughened to assure adhesion of
the subsequent coating
The optimum intercoat adhesion is obtained when the subsequent coating is
applied before the full cure time of the previous coating has elapsed.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.018 to 0.021 inch
Fluid Pressure: 2,800 to 3,500 psi
Conventional Spray : Tip Size: 1.5 – 3mm
Atomizing Pressure: 43 – 57 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 80 +2%
4.2 Product Weight (ASTM D1475) : 1.5 Kg/L
4.3 Viscosity (ASTM D562) : 14 to 16 dPa.s
4.4 Flash Point (ASTM D93 or D56) : 20°C
Approval Date: May 8, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 361 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Topcoat
Type of Coating : Epoxy Topcoat: Polyamide-Cured
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmacover 410
SAP M/N (SAMS S/N) : 1000194565 (09-612-357), 1000194568 (09-612-358), 1000194590 (09-612-
359), 1000195273 (09-612-462), 1000195277 (09-612-465) or 1000195314
(09-612-467)
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 80:20 (base:hardener)
by volume
2.3 Thinner : 91-92
SAP M/N (SAMS S/N) : 1000198452 (09-738-260)
2.4 Thinning Requirements : Up to 10% by volume
30 to 40 % for miscoat
2.5 Induction Time : Nil
2.6 Pot Life : 4 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 200 micrometers
3.3 Typical Dry Film Thickness Per Coat : 160 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 32 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 1
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 362 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-22A Topcoat - Sigmacover 410 (Cont'd)
3.6 Drying Time
Substrate Overcoat Interval *
Temperature To Handle Minimum Maximum
10°C 24 Hours 24 Hours None
30°C 6 Hours 6 Hours None
50°C 3 Hours 3 Hours None
* Overcoat with Sigmacover CM coating.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.018 to 0.021 inch
Fluid Pressure: 2,800 to 3,500 psi
Conventional Spray : Nozzle Size: 1.5 to 3 mm
Nozzle Pressure: 43 to 57 psi
Brushr and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 78 to 82%
4.2 Product Weight (ASTM D1475) : 1.5 to 1.9 Kg/L
4.3 Viscosity (ASTM D562) :(12 to 17 dPa.s depending on color)
4.4 Flash Point (ASTM D93 or D56) : 20°C
Approval Date: August 16, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 363 of 398
APCS-26
Type of Coating : Polyamide Cured Epoxy Primer/Topcoat
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmacover 410 Aluminium
SAP M/N (SAMS S/N) : 1000194381 (09-612-330), 1000194386 (09-612-331),
1000194401 (09-612-332), 1000194407 (09-612-333), 1000194420 (09-612-334),
1000194427 (09-612-335) or 1000194471 (09-612-336
1. Storage
1.1 Shelf life, sheltered storage @ 35°C maximum : 1 year
2. Mixing
2.1 No. of Components : 2
2.2 Mixing Ratio : 4:1 (base:hardener) by volume
2.3 Thinner : 91-92
SAP M/N (SAMS S/N) : 1000198487 (09-738-420)
2.4 Thinning Requirements : Up to 10%
2.5 Induction Time : Nil
2.6 Pot Life : 4 hours @ 25°C
2 hours @ 40°C
3. Application
3.1 Maximum Allowable Substrate Temperature : 50°C
3.2 Typical Wet Film Thickness Per Coat : 200 micrometers
3.3 Typical Dry Film Thickness Per Coat : 160 micrometers
3.4 Theoretical Coverage @ 25 Micrometers : 32 M²/L
Dry Film Thickness
3.5 Minimum Number of Coats : 2
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 364 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26 Primer/Topcoat - Sigmacover 410 Aluminium (Cont'd)
3.6 Drying Time
Substrate Recoat Interval
Temperature To Handle Minimum Maximum
10°C 24 Hours 24 Hours None
30°C 6 Hour 6 Hours None
50°C 3 Hour 3 Hours None
In cases of exposure to direct sunlight or when the surface is contaminated, it is
recommended that the surface be cleaned and roughened to assure adhesion of
the subsequent coating
The optimum intercoat adhesion is obtained when the subsequent coating is
applied before the full cure time of the previous coating has elapsed.
3.7 Recommended Equipment
Airless Spray : Tip Size: 0.018 to 0.021 inch
Fluid Pressure: 2,800 to 3,500 psi
Conventional Spray : Tip Size: 1.5 – 3mm
Atomizing Pressure: 43 – 57 psi
Brush and Roller : For touch-up only
4. Technical Properties
4.1 Volume Solids (ASTM D2697) : 80 +2%
4.2 Product Weight (ASTM D1475) : 1.5 Kg/L
4.3 Viscosity (ASTM D562) : 14 to 16 dPa.s
4.4 Flash Point (ASTM D93 or D56) : 20°C
Approval Date: May 8, 2008
Replaces: January 16, 2005
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 365 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26T
Type of Coating : Epoxy Primer: Solvent-Based
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmacover 410
SAP M/N (SAMS S/N) : 1000194381 (09-612-330), 1000194386 (09-612-331), 1000194401 (09-
612-332), 1000194407 (09-612-333), 1000194420 (09-612-334), 1000194427
(09-612-335) or 1000194471 (09-612-336)
Refer to APCS-26 Epoxy Coating Data Sheet Sigmacover 410 for the primer and intermediate coat.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 366 of 398
Manufacturer - Approved Saudi Aramco Data Sheet
APCS-26T
Type of Coating : Polyurethane Topcoat: Solvent-Based
Manufacturer : Sigma Paints S.A. Ltd.
Product Name : Sigmadur Gloss 7528
SAP M/N (SAMS S/N) : 1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793
(09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)
Refer to APCS-1D/E/F Sigmadur Gloss 7528 for the topcoat application.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 367 of 398
Revision Summary
10 December 2006 Editorial revisions. Revised the "Next Planned Update." 19 April 2009 Editorial revisions.
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 368 of 398
Attachment – Drying Time Graphs
TABLE OF CONTENTS
APCS Number Product Name Manufacturer
2A Sipoxy-Guard 270 SIPCO
2A/B Hempadur 85671 Hempel Paints
2A/B/C Primer Colturiet Phenguard 7409 Sigma Paints
2A/B/C Top Coat Colturiet Phenguard 7436 Sigma Paints
2C Amercoat 346 Oasis Ameron Ltd.
2C Siptank 250 SIPCO
2C Intermediate Coat Colturiet Phenguard 7435 Sigma Paints
2D Hempadur 85210 Hempel Paints
2D Interline 925 International Paint
2D Sipoxy-Guard 245 SIPCO
3 Coal Tar Epoxy Mastic 35670 Hempel Paints
3 Intertuff Pitch Epoxy JXA324/JXA325 International Paint
3 Amercoat 325 Oasis Ameron Ltd.
3 Coal Tar Epoxy C-200a Sigma Paints
3 Siptar 6444 SIPCO
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 369 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 370 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 371 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 372 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 373 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 374 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 375 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 376 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 377 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 378 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 379 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 380 of 398
S
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 381 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 382 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 383 of 398
Attachment – Drying Time Graphs
TABLE OF CONTENTS
APCS Number Product Name Manufacturer
2A Devchem 253 SIPCO
2A/B Hempadur 85671 Hempel Paints
2A/B/C Primer Colturiet Phenguard 7409 Sigma Paints
2A/B/C Top Coat Colturiet Phenguard 7436 Sigma Paints
2C Amercoat 346 Oasis Ameron Ltd.
2C Molupon 244 SIPCO
2C Intermediate Coat Colturiet Phenguard 7435 Sigma Paints
2D Hempadur 85210 Hempel Paints
2D Interline 925 International Paint
2D Devran 744 SIPCO
3 Coal Tar Epoxy Mastic 356-SA Hempel Paints
3 Intertuff Pitch Epoxy JXA324/JXA325 International Paint
3 Amercoat 325 Oasis Ameron Ltd.
3 Coal Tar Epoxy C-200a Sigma Paints
3 Redox EP-T 3333 SIPCO
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 384 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 385 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 386 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 387 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 388 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 389 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 390 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 391 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 392 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 393 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 394 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 395 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 396 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 397 of 398
Document Responsibility: Paints and Coatings Standards Committee SAES-H-101V
Issue Date: 19 April 2009 Approved Saudi Aramco
Next Planned Update: 10 December 2011 Data Sheets - Paints and Coatings
Page 398 of 398