datasheet amp speaker - monkmakes.com

3
Datasheet: AMPLIFIED SPEAKER V1D - 2020-03-20 The MonkMakes Amplified Speaker is an easy to use amplified speaker on a PCB. The board needs a 5V power supply that can be provided by a Raspberry Pi or Arduino. Audio input will normally be to the 3.5mm stereo audio jack socket, which is mixed to a mono signal as there is just a single speaker on the board. The board is based on the PAM8302 digital amplifier IC. Absolute Maximum Ratings Units Supply voltage 6 V Electrical Characteristic Units Supply voltage range 2.0 to 5.5 V Speaker impedance 8 Ω Speaker nominal max power 500 mW Coupling AC Maximum current consumption 500 mA Nominal amplification power 2.5 W

Upload: others

Post on 05-Apr-2022

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: datasheet amp speaker - monkmakes.com

Datasheet:AMPLIFIED SPEAKER

V1D - 2020-03-20

The MonkMakes Amplified Speaker is an easy to use amplified speaker on a PCB.

The board needs a 5V power supply that can be provided by a Raspberry Pi or Arduino. Audio input will normally be to the 3.5mm stereo audio jack socket, which is mixed to a mono signal as there is just a single speaker on the board.

The board is based on the PAM8302 digital amplifier IC.

Absolute Maximum RatingsUnits

Supply voltage 6 V

Electrical CharacteristicUnits

Supply voltage range 2.0 to 5.5 V

Speaker impedance 8 Ω

Speaker nominal max power

500 mW

Coupling AC

Maximum current consumption

500 mA

Nominal amplificationpower

2.5 W

Page 2: datasheet amp speaker - monkmakes.com

Page 2

Page 3: datasheet amp speaker - monkmakes.com

Board Outline (actual size)

Page 3