datasheet kbm hq

1
PRODUCT DATASHEET TELECOM & SECURITY: Viale Stefano Tinozzi, snc - Zona Ind.le Interporto d’Abruzzo - 65024 Manoppello (PE) - ITALY Tel. +39.085.8569020 - Fax +.39.085.8569707 - www.telecomsecurity.it - [email protected] - Skype: telecomsecurity_info KBM-HQ CaP System BNC MALE CONNECTOR HIGH QUALITY: R. L. > 30 dB Suitable for Cables: RG6, RG59, RG178, ... suitable for all cable with inner conductor from Ø 0,3 up to Ø 1,1 mm (from AWG 28 to AWG 18) Electrical Specification Impedance: 75 Ohm Frequency: 0-3 GHz Return Loss: > 30 db @ 3 GHz Dielectric W/V: 500 Veff Insulation res: 5000 M-Ohm Mechanical Specification Body Material: Brass - Gold plated Center Contact: Beryllium Copper - Gold plat. Insulator: HDPE Bayonet Cap: Zinc - Black Nickel plated Gasket: Rubber Washer: Fe - Nickel plated Spring: SK5 - Nickel plated Inner Retaining Ring: Fe - Nickel plated CaP®: Protected Plastic Compound Weight: 9.8 g Environmental Specification Operating Temp: - 40 ÷ + 120 °C All measures are in millimeters Stripping Dimension: Return Loss: Utilize these Tools Mkr (MHz) dB 1: 100 -54.083 2: 1000 -42.618 3: 2000 -38.761 4: 3000 -31.056 Start 0.300 MHz Stop 3000.000 MHz -70 -60 -50 -40 -20 -10 0 10 dB -30 Technical data and characteristics are not binding an may be changed without prior notice

Upload: giovannipugliese

Post on 22-Jul-2015

134 views

Category:

Technology


7 download

TRANSCRIPT

Page 1: Datasheet KBM HQ

PRODUCT DATASHEET

TELECOM & SECURITY: Viale Stefano Tinozzi, snc - Zona Ind.le Interporto d’Abruzzo - 65024 Manoppello (PE) - ITALY Tel. +39.085.8569020 - Fax +.39.085.8569707 - www.telecomsecurity.it - [email protected] - Skype: telecomsecurity_info

KBM-HQ

CaP SystemBNC MALE CONNECTOR

HIGH QUALITY: R. L. > 30 dB

Suitable for Cables:RG6, RG59, RG178, ... suitable for all cable with inner conductor from Ø 0,3 up to Ø 1,1 mm (from AWG 28 to AWG 18)

Electrical SpecificationImpedance: 75 OhmFrequency: 0-3 GHzReturn Loss: > 30 db @ 3 GHzDielectric W/V: 500 VeffInsulation res: 5000 M-Ohm

Mechanical SpecificationBody Material: Brass - Gold platedCenter Contact: Beryllium Copper - Gold plat.Insulator: HDPEBayonet Cap: Zinc - Black Nickel platedGasket: RubberWasher: Fe - Nickel platedSpring: SK5 - Nickel platedInner Retaining Ring: Fe - Nickel platedCaP®: Protected Plastic CompoundWeight: 9.8 g

Environmental SpecificationOperating Temp: - 40 ÷ + 120 °CAll measures are in millimeters

Stripping Dimension: Return Loss:

Utilize these Tools

Mkr (MHz) dB 1: 100 -54.083 2: 1000 -42.618 3: 2000 -38.761 4: 3000 -31.056

Start 0.300 MHz Stop 3000.000 MHz

-70

-60

-50

-40

-20

-10

0

10

dB

-30

Technical data and characteristics are not binding an may be changed without prior notice