datasheet solids - vacuum batch conveyor vacufill …3.1 50 130 3,0 kw 0,06 180 3.2 65 230 4,5 kw...

Datasheet solids - Vacuum Batch Conveyor VacuFill TSF-Basic solids solutions group www.solids.eu O:\SST-Solids Components\5. solids Pneumatische Förderer\61_TSF-Basic\DA_TSF-Basic_EN_230120.doc Seite 1 von 4 Operating conditions: Permissible operating pressure: >0,1 bar absolute up to atmospheric Product temperature max: 100°C Min/Max ambient temperature -10 °C ≤ T ≤ 50 °C, dried compressed air required Bulk solids data: Powdered till granulates, up to medium hardness, free flowing up to limited flowing products Type Usable Volume dm3 Batch Times (s) *) Inlet-Ø/ Vessel-Ø mm Height mm Weight kg TSF50150B01 4,5 10-15 50/150 550 40 TSF80250B01 35 18-23 80/250 1255 80 TSF80350B01 50 25-30 80/350 1131 120 *) up to max. conveying pipeline length of 20 m, exact definition depends on the project Basical version: • Dust housing with filter head made of welded steel construction – carbon steel With filter made of porous sintered stainless steel for dust separation • Material inlet: butterfly valve type DKA-Basic • Material outlet: butterfly valve type DKA-Basic • Vacuum-connection: butterfly valve type DKA- Basic DN80 • Compressed air filter cleaning: ball valve DN25, pressure controller and hand ball valve • Dismountable and cleanable Butterfly valves and ball valve equipped with solenoid valves and initiators Filling cycle only over time possible Oberflächenbehandlung: Surface treatment: Chemical stripped, Primer 40 μm zinc phosphate,Top coat 40 μm 2-component polyurethane, RAL5012 blue This is not an equipment according ATEX-directive 2014/34/EU, but in contact with product (inside) usable in the zones 20-21-22. Additional electrical parts must be approved for the chosen ATEX-zone. Freigabe: MIGSA SST H. Linder Datum: Kurzzeichen: Datum: Kurzzeichen: Datum: Kurzzeichen: Preliminary Änderungen vorbehalten

Upload: others

Post on 17-Jul-2020

1 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Datasheet

solids - Vacuum Batch Conveyor VacuFill TSF-Basic

solids solutions group www.solids.eu

O:\SST-Solids Components\5. solids Pneumatische Förderer\61_TSF-Basic\DA_TSF-Basic_EN_230120.doc Seite 1 von 4

Operating conditions: � Permissible operating pressure: >0,1 bar absolute up to atmospheric � Product temperature max: 100°C � Min/Max ambient temperature -10 °C ≤ T ≤ 50 °C, dried compressed air required � Bulk solids data: Powdered till granulates, up to medium hardness,

free flowing up to limited flowing products

Type Usable Volume

dm3 Batch Times

(s) *) Inlet-Ø/

Vessel-Ø mm Height

mm Weight

kg TSF50150B01 4,5 10-15 50/150 550 40

TSF80250B01 35 18-23 80/250 1255 80

TSF80350B01 50 25-30 80/350 1131 120 *) up to max. conveying pipeline length of 20 m, exact definition depends on the project

Basical version:

• Dust housing with filter head made of welded steel construction – carbon steel

� With filter made of porous sintered stainless steel for dust separation

• Material inlet: butterfly valve type DKA-Basic • Material outlet: butterfly valve type DKA-Basic • Vacuum-connection: butterfly valve type DKA-

Basic DN80 • Compressed air filter cleaning: ball valve DN25,

pressure controller and hand ball valve • Dismountable and cleanable � Butterfly valves and ball valve equipped with

solenoid valves and initiators � Filling cycle only over time possible � Oberflächenbehandlung: � Surface treatment: � Chemical stripped, Primer 40 µm zinc

phosphate,Top coat 40 µm 2-component polyurethane, RAL5012 blue

This is not an equipment according ATEX-directive 2014/34/EU, but in contact with product (inside) usable in the zones 20-21-22. Additional electrical parts must be approved for the chosen ATEX-zone. Freigabe: MIGSA SST H. Linder Datum:

Kurzzeichen:

Datum:

Kurzzeichen:

Datum:

Kurzzeichen:

Preliminary Änderungen vorbehalten

Datasheet

solids - Vacuum Batch Conveyor VacuFill TSF-Basic

solids solutions group www.solids.eu

O:\SST-Solids Components\5. solids Pneumatische Förderer\61_TSF-Basic\DA_TSF-Basic_EN_230120.doc Seite 2 von 4

Options:

1.1 Equipped with assembled terminal box for pneumatic made of stainless steel; limit switches and sensors are connected to terminal strips. Readily equipped with tubes and cables.

1.2 Terminal box same as option 5.1 with additional integrated Micro-SPS-control including the power section, with operating panel and display in the door of the cabinet. In the display are shown the adjustable parameters, which are necessary for the operation. The control can communicate with a superior control by ethernet. The device is wired, equipped with tubes, tested and ready for operation.

2. electrical components outside for zone 2/22

3. Claw vacuum pump with three-phase motor 400V 50HZ IP54

Pipeline-Ø

mm *) Amount of air

Bm3/h * Power

Ultimate Pressure bar abs.

Weight kg

3.1 50 130 3,0 kW 0,06 180 3.2 65 230 4,5 kW 0,10 240 3.3 80 360 6,0 kW 0,15 240

*) approximate value

3.4 with integrated frequency converter and operating panel

4. Pressure sensor

4.1 At the raw gas side

4.2 At the clean gas side

raw gas side

clean gas side

Datasheet

solids - Vacuum Batch Conveyor VacuFill TSF-Basic

solids solutions group www.solids.eu

O:\SST-Solids Components\5. solids Pneumatische Förderer\61_TSF-Basic\DA_TSF-Basic_EN_230120.doc Seite 3 von 4

5. False air valve, consisting of T-piece, butterfly valve type

DKA-Basic and filter, incl. solenoid valve and initiator 6. Level switch high

7. 2 Brackets, welded at the hopper

8. Options for product outlet:

8.1 Flange PN10 with flat nozzle

8.2 Nozzle with 2 flanges PN10

Datasheet

solids - Vacuum Batch Conveyor VacuFill TSF-Basic

solids solutions group www.solids.eu

O:\SST-Solids Components\5. solids Pneumatische Förderer\61_TSF-Basic\DA_TSF-Basic_EN_230120.doc Seite 4 von 4

9. product inlet: Flat flange PN10

10. With 2 vacuum-connection:: consisting of T-piece and 2 butterfly valve type DKA-Basic

Related documents: 3D-Part: Type.step (example: TSF50150B01. Step) 2D-planning drawing: Type.dxf (example: TSF50150B01. dxf) Selection criteria: SG-TSF Pricelist: PL-TSF-Basic Drawing numbers list: Draw-No-List_TSF-Basic

Bewegen naar Duurzame Inzetbaarheid · Overgewicht / obesitas 32%/11% 1,2 / 1,9 0,06/0,09 Roken 22% 1,3 0,06 Gebrek aan lichamelijke activiteit 32% 1,2 0,06 Onvoldoende fruit & groente

MBT - MFA - MS2 Moteurs à courant continu de puissance fractionnaire de 0,06 à 1 kW MBT 1141 MFA 56 MBT 65 MBT 82 MS 36 - 35 MS 56 - 85 Gamme LEROY-SOMER de 0,06 à 560 kW Moteurs

SZABADALMI KÖZLEMÉNYEK - hipo.gov.hu · 0,02-0,06 tömeg% szegfűborsból (Pimenthae fructus), 0,02-0,06 tömeg% szerecsendióból (Myristicae semen), 0,02-0,06 tömeg% orvosi zsálya

ETA PE-K 100 do 240 kW Zmogljivi kotel na pelete za

Balboa Instruments Incorporated - Angelfire Trouble Shooting.pdf• Single-speed pump 240 VAC, 60 Hz, 2 HP • Blower 240 VAC, 60 Hz, 2 HP • Heater 240 VAC, 60 Hz, 5.5 kW • Light

AE8-1405 R5 February 2019 EV2 Single Phase Series Variable ...€¦ · EV2 Single Phase Series Variable Speed Drives 200-240 V, 3.7 kW/5.5 kW/8.0 kW TABLE OF CONTENTS ... The speed

240÷1020 kW - Swegon

30RH 040-240 “B” - תדיראן – Tadiran 040 - 240... · 30RH 040-240 “B” Nominal cooling capacity 38-210 kW Nominal heating capacity 38-229 kW Air-to-Water Heat Pumps

LS - Leroy-Somer · LS Réf. 3173 - 2.33 / b - 02.2000 Moteurs asynchrones monophasés fermés Carter alliage d'aluminium - 0,06 à 5,5 kW Catalogue technique

alpha Basic Line - WITTENSTEIN€¦ · 0,07 0,06 0,06 0,06 0,05 ≤ 12 0,58 0,58 0,58 0,52 0,52 240 170 4 97 > 20000 0,5 ≤ 59 +90 IP 64 ELC-0005BA010,000-X X = 004,000 - 012,700

Electromécanique Multibloc 4101 Généralités - … · Moteurs frein FMD : moteur asynchrone frein triphasé ou monophasé à commande de repos, de 0,06 à 0,75 kW FCR : moteur

E 3000 DE - MITweb.mit.edu/kirtley/binlustuff/literature/purchase...0.25 kW - 4.0 kW, 1/3 AC 200 V - 240 V 0.55 kW - 7.5 kW, 3 AC 380 V - 480 V NORDAC SK 700E Frequency Inverter This