dayliff control panels

7/28/2019 Dayliff Control Panels

1/2

STANDARD OPTIONS

POWER MONITORING

Voltmeter (Ref PV): Indicates incoming supply voltage. Three phase panels include a selector switch to check allvoltages phase/phase and phase/neutral

Frequency Meter (Ref PF): Indicates incoming power frequency.

Phase Control Relay (Ref PP): Protects against over/under voltage, phase sequence,phase assymetry, and phasefailure.

Grundfos MP204 Pump Controller (Ref MP204): Includes Grundfos MP204 integrated pump controller unit andnecessary fuse protection. The MP204 controller digitally monitors current consumption and asymmetry, supply voltage,phase sequence, motor temperature and insulating resistance and protects installations against dry running, mechanicalmotor defects, high temperature and variable mains supply.

PUMP MONITORING

Ammeter (Ref MA): Indicates pump running current.

Hourmeter (ref MH): Indicates total hours run.

CONTROL ACCESSORIES

Level Control Relay (Ref CL): Electrically activated relay for start and stop high or low water level control.

Timer (Ref CT): Adjustable timer for application with automatic control, especially pressure switches.

Time Switch (Ref CS): 24hr time switch to set desired time for pump operation and pump stop.

Auto Trip changeover for two pump duty/standby systems (Ref CA):Changes operation to standby pump if

duty pump trips (panel types H & I only).

Auto cycle changeover for two pump duty/standby systems (Ref CC): Changes duty pump each operatingcycle as well as in the event of duty pump trip.

Auto cycle changeover for two pump duty/standby systems (Ref CF):As for panel ref CC incorporates 24Vcontrol circuit for submersible pump installations (panel type H & I only).

Level Alarm (Ref CA):Activates an alarm bell to indicate high or low water levels.

ENCLOSURES

MPCB Starter Weather Proofing (Ref EW):For external installation of panels incorporating MPCB starters.

Double Door Enclosure (Ref ED): For external installation requiring total weather proofing and added security. Thefirst door provides access to the panel fascia and the second access to the components.

Double Enclosure (Ref EE): Second enclosure for high security external installation.

Free Standing Frame (Ref EF): For free standing non wall mounted installations.

Note:- All options are not available for all panels. Please check with panel supplier before ordering.

WS106B-07/08

DATA SHEET Pump Control Panels

The DAYLIFF range of pump control panels have been specially designed to provide effective protection and reliablecontrol of all electric pumps. A wide range is offered, standard panels being available for single and two pump

installations in sizes from 0.37 to 22KW for both manual and automatic operation. In addition, various optionalaccessories are offered so panels can be customised to suit site requirements. Panels for multi-pump, large motor andspecialised control applications can also be supplied, these being individually designed to suit the particularinstallation.

All panels utilise quality components and are supplied completely pre-wired with terminals for control accessories(where applicable) as well as incoming and outgoing power connections. Comprehensive wiring diagrams areprovided with all panels.

Enclosures are manufactured of mild steel and finished with a hard baked non-chip dry powder epoxy finish. Panelswith DOL & Star Delta starters are provided with hinged lockable door fronts and are of IP65weather protectionspecification. Other panels are of IP44 specification and must be weather protected.

NB. Contents herein are not warranted. The right is reserved to amend specifications without notice.

www.dayliff.comknowH Ow through experience

2

AVAILABLE FROMKENYANAIROBI- HEADOFFICE

TEL: (+25420)6968000FAX: 557617d&[email protected]

NAIROBI- WESTLANDS

TEL: (+25420)4446011/6,FAX: [email protected]

NAIROBI - DOWNTOWN

TEL / FAX: (+254 20) 340102d&[email protected]

THIKA

TEL / FAX: (+254 67) 20084/[email protected]

NAKURU

TEL: (+254 51) 2213248 FAX: 2212956d&[email protected]

KISII

TEL: (+254 58) 30949, FAX: 30854d&[email protected]

ELDORET


MOMBASA


MALINDI

TEL: (254 42) 2120425, FAX: 2120426d&[email protected]

DIANI

TEL: (254 40) 3202181, FAX: 3202182d&[email protected]

LAMU

TEL / FAX: (+254 20) 2651052/56d&[email protected]

KISUMU


TANZANIADARES SALAAM

TEL: (+255 )2112515/6,FAX:[email protected]

ARUSHA

TEL: (+25527)2502517/8, FAX:[email protected]

ZANZIBAR

TEL: (+25524)2234660/1, FAX:[email protected]

MWANZA

TEL: (+255 28) 2541971/2, FAX: [email protected]

22 2112513

ETHIOPIAADDIS ABABA

TEL: (+251 11) 5159341/44, FAX: 5159351d&[email protected]

UGANDAKAMPALA

TEL: (+256 414) 346337/8, FAX: 346335d&[email protected]

NAKESERO


GULU


RWANDA

KIGALI

TEL: (+250) 504039, FAX: [email protected]

ZAMBIA

LUSAKA

TEL/FAX: (+260 211) 288010/1, 845010/[email protected]

KITWE

TEL/FAX: (+260 212) 221747/[email protected]

NDOLA

TEL/FAX: (+260 212) 610936/[email protected]

LIVINGSTONE

TEL/FAX: (+260 213) [email protected]

7/28/2019 Dayliff Control Panels

2/2

PANEL TYPES

SINGLE PUMP CONTROL

Type A: Economy specification panel for manual operation of single phase borehole .Type B: Economy specification panel for automatic control ofsingle phase borehole pumps.

Type C: Medium specification panel for automatic control of one small and medium size pump.Type D: Full specification panel for a medium size pump.Type E: Full specifications panel for a large pump.

TWO PUMP CONTROL - DUTY / STANDBY OPERATION

Type F: Medium specification panel for two small and medium size pumps of similar size for manual change over.Type G: Full specification panel for small and medium size pumps for manual change over.Type H: Full specification DOL start panel for small and medium size pumps with particular use for pumps of different size.Type I: Full specification Star Delta panel for large pumps.

TWO PUMP CONTROL - INDEPENDENT OPERATION

Type J: Economy specification panel for manual operation of two small single phase pumps with thermal protection incorporatedin the motors.

Type K: Medium specification panel for manual control of small and medium size pumps.Type L: Medium specification panel for automatic control of small and medium size pumps.Type M: Full specification DOL start panel for medium size pumps.Type N: Full specification Star Delta start panel for large pumps.

pumps

INTERNAL COMPONENTS OF A TYPICAL CONTROL PANEL

STARTER TYPES

Manual MPCB: Provided with thermal and fixed magnetic overload protection. If automatic control is required aseparate contactor is required.Direct-on-Line: Provided with an adjustable thermal overload and contactor.Star-Delta: Provided with an adjustable thermal overload and three contactors with timer for changeover from star to deltaconnection.

adjustable

SPECIFICATIONS

SINGLE PUMP CONTROL

TWO PUMP CONTROL - DUTY/STANDBY OPERATION

TWO PUMP CONTROL - INDEPENDENT OPERATION

Size RangeIncoming Isolator

PumpMCB

Starters Indicators Selector

Sw itc h Fus ed MP CB +C ont ac tor D OL St ar -D el ta 'O n 'Tr ip' Au to/ Han d 102

Type A

Type B

Type C

Type D

Type E

1 1 1

1

1 1

1

1 1

1

0.37-1.5kW,1ph

11

1

1

1 1

1

1

1

1

1

1

1

1

0.37-2.2kW,1ph

0.37-2.2kW,1ph1.1-7.5kW,3ph

7.5-22kW,3ph

0.37-2.2kW,1ph1.1-22kW,3ph

Type F

Type G

Type H

Type I

1

1

1

2

2

2

2

2

2

2

2

22

1

2

2

1

1

1

1

1

1

1

1

1

1

1

1

0.37-2.2kW,1ph1.1-7.5kW, 3ph

0.37-2.2kW,1ph1.5-15Kw,3ph

0.37-2.2kW,1ph1.1-15kW,3ph

7.5-22kW,3ph

Type J

Type K

Type L

Type M

Type N 1

2

2

2

2

2 2

2

2

2

2

2

2

2

2

2

2

2

0.37-2.2Kw,1ph

0.37-2.2Kw,1ph1.1-7.5Kw,3ph

0.37-2.2Kw,1ph1.1-7.5Kw,3ph

0.37-2.2Kw,1ph1.1-15Kw,3ph

7.5-22Kw,3ph

All panels are manufactured to exacting standards as approved by the component suppliers and are quality products whichcomplement the wide range of pumps available from DAVIS & SHIRTLIFF to provide cost effective, reliable and efficient waterinstallations.

dayliff control panels

Documents