db2527-abrasion cavity 0809
TRANSCRIPT
![Page 1: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/1.jpg)
Toothwear and Restoration of Toothwear and Restoration of Abrasion Lesions.Abrasion Lesions.
Dr. Jasmina Qamaruz ZamanDr. Jasmina Qamaruz ZamanDept of Operative DentistryDept of Operative Dentistry
Faculty of DentistryFaculty of DentistryUKMUKM
![Page 2: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/2.jpg)
TERMINOLOGYTERMINOLOGY
ToothwearToothwear
Tooth surface loss (TSL)Tooth surface loss (TSL)
![Page 3: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/3.jpg)
MECHANISMSMECHANISMS
1. Physiological (normal ageing)1. Physiological (normal ageing)
2. Pathological2. Pathologicala. Erosiona. Erosionb. Attritionb. Attritionc. Abrasionc. Abrasiond. Abfractiond. Abfractione. Multifactoriale. Multifactorial
![Page 4: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/4.jpg)
EROSIONEROSION
Loss of tooth structureLoss of tooth structure
as a result of dissolutionas a result of dissolution
due to acidic chemical attack, due to acidic chemical attack,
other than those producedother than those produced
by intra-oral bacteria.by intra-oral bacteria.
![Page 5: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/5.jpg)
EROSIONEROSION
A.A. Extrinsic sourceExtrinsic source
B.B. Intrinsic sourcesIntrinsic sources
![Page 6: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/6.jpg)
EROSIONEROSION
A. Extrinsic source:A. Extrinsic source:1.1. BeveragesBeverages2.2. FoodsFoods3.3. Industrial processesIndustrial processes
B. Intrinsic sources:B. Intrinsic sources:1.1. Gastro-oesophageal reflux diseaseGastro-oesophageal reflux disease2.2. Eating disordersEating disorders3.3. Pregnancy morning sicknessPregnancy morning sickness
![Page 7: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/7.jpg)
Erosion: Acid fumes
![Page 8: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/8.jpg)
Erosion: ‘Cupping out’ of the dentine. This is because once exposed, dentine dissolves faster than enamel.
![Page 9: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/9.jpg)
Erosion: Note the proud amalgam restorations. This is because the tooth has dissolved away from around the amalgam restoration.
![Page 10: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/10.jpg)
Erosion: Gastric reflux – erosion on the palatal surfaces of posterior teeth.
![Page 11: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/11.jpg)
ABRASIONABRASION
Loss of tooth structure Loss of tooth structure
by friction by friction
from an external agent.from an external agent.
![Page 12: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/12.jpg)
ABRASIONABRASION
Etiology:Etiology:
1. Biting sewing thread1. Biting sewing thread
2. Pipe chewing2. Pipe chewing
3. Pen/pencil biting3. Pen/pencil biting
4. Tooth brushing4. Tooth brushing
![Page 13: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/13.jpg)
Abrasion: over vigorous tooth brushing. ‘V’ shaped or saucer shaped notches at the cervical margins of teeth.
![Page 14: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/14.jpg)
Abrasion: Pin chewing
![Page 15: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/15.jpg)
Abrasion: sunflower seeds
![Page 16: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/16.jpg)
ATTRITIONATTRITION
Tooth surface loss due to Tooth surface loss due to
tooth to tooth contact tooth to tooth contact
during function or parafunction.during function or parafunction.
![Page 17: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/17.jpg)
ATTRITIONATTRITION
Etiology:Etiology:
1.1. Normal functional movement.Normal functional movement.
2.2. Bruxism.Bruxism.
Grinding of teeth during non-functional Grinding of teeth during non-functional movements of the jaw.movements of the jaw.
![Page 18: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/18.jpg)
Attrition
![Page 19: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/19.jpg)
Attrition – iatrogenic (from porcelain crowns)
![Page 20: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/20.jpg)
ABFRACTIONABFRACTION
Loss of tooth structureLoss of tooth structure due to due to
flexural forces.flexural forces.
![Page 21: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/21.jpg)
Teeth flex under Teeth flex under occlusal loads, occlusal loads, stresses are stresses are transmitted to the transmitted to the cervical area cervical area causing cervical causing cervical enamel rods to enamel rods to fracture and fracture and dislodge. dislodge.
With increased With increased flexural movements flexural movements V-shaped cavity V-shaped cavity appear.appear.
ABFRACTION
![Page 22: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/22.jpg)
Often, the cause of tooth wear is multi-Often, the cause of tooth wear is multi-factorial ie. attrition, abrasion and erosion factorial ie. attrition, abrasion and erosion
occurs at the same time.occurs at the same time.
![Page 23: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/23.jpg)
Multi-factorial
![Page 24: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/24.jpg)
Multi-factorial
![Page 25: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/25.jpg)
Restoration of Abrasion Restoration of Abrasion LesionsLesions
![Page 26: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/26.jpg)
Materials and techniques used to Materials and techniques used to restore abrasion cavitiesrestore abrasion cavities
1.1. Glass Ionomer cement (Conventional / Glass Ionomer cement (Conventional / Resin Modified).Resin Modified).
2.2. Composite resinComposite resin3.3. Sandwich technique.Sandwich technique.
![Page 27: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/27.jpg)
Glass Ionomer CementGlass Ionomer Cement
AdvantagesAdvantages Chemical adhesion to enamel and dentin (retentive Chemical adhesion to enamel and dentin (retentive
features in the cavity design is less important).features in the cavity design is less important). Release fluoride which prevent secondary caries.Release fluoride which prevent secondary caries.
Disadvantages Disadvantages (compared to composite resin)(compared to composite resin) Less estheticLess esthetic OpaqueOpaque
![Page 28: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/28.jpg)
Benefits of Glass IonomerBenefits of Glass Ionomer
Chemical Bond to tooth - no bonding agent Chemical Bond to tooth - no bonding agent requiredrequired
Bonds to moist toothBonds to moist tooth Fluoride protectionFluoride protection Excellent marginal seal - no shrinkageExcellent marginal seal - no shrinkage Thermal expansion = toothThermal expansion = tooth Biocompatable - Ideal match for dentinBiocompatable - Ideal match for dentin
![Page 29: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/29.jpg)
TechniqueTechnique1. Isolation (Rubber dam, cotton rolls, gingival 1. Isolation (Rubber dam, cotton rolls, gingival
retraction cord)retraction cord)
2. Select and adapt a metal cervical matrix.2. Select and adapt a metal cervical matrix.
3. Clean the cavity with pumice and water to 3. Clean the cavity with pumice and water to remove the acquired pellicle – wash and remove the acquired pellicle – wash and dry the cavity gently. dry the cavity gently.
![Page 30: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/30.jpg)
TechniqueTechnique
4. Apply dentin conditioner for 4. Apply dentin conditioner for 20-3020-30 seconds – wash and seconds – wash and dry.dry.
5. Insert the GIC into the cavity – cover with the cervical 5. Insert the GIC into the cavity – cover with the cervical matrix, remove access material from around the matrix, remove access material from around the matrix.matrix.
6. Paint the surface of GIC with dentine bonding agent 6. Paint the surface of GIC with dentine bonding agent (DBA) immediately after removal of the matrix.(DBA) immediately after removal of the matrix.
7. Light cure for 20seconds to cure the DBA. However, if 7. Light cure for 20seconds to cure the DBA. However, if you are using RMGIC (Fuji II LC), you need to cure the you are using RMGIC (Fuji II LC), you need to cure the GIC and DBA for 40 seconds.GIC and DBA for 40 seconds.
![Page 31: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/31.jpg)
TechniqueTechnique
8. Check the margins of the restoration, remove any 8. Check the margins of the restoration, remove any excess material using a pointed high speed bur.excess material using a pointed high speed bur.
9. Reapply the DBA and light cure for 20 seconds.9. Reapply the DBA and light cure for 20 seconds.
10. Do not polish the GIC restoration, polishing can 10. Do not polish the GIC restoration, polishing can only be done 24 hours later.only be done 24 hours later.
11. Polishing (after 24 hours) – use polishing discs: 11. Polishing (after 24 hours) – use polishing discs: from dark brown to light yellow.from dark brown to light yellow.This step is not necessary if you have used a This step is not necessary if you have used a cervical matrix.cervical matrix.
![Page 32: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/32.jpg)
3 erosion / abrasion 3 erosion / abrasion cavities at the buccal cavities at the buccal surface of the teeth.surface of the teeth.
Scrub the surface with Scrub the surface with pumice and water – pumice and water – wash and dry.wash and dry.
Case 1
![Page 33: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/33.jpg)
Translucent cervical matrix is Translucent cervical matrix is applied.applied.For the simulation exercise For the simulation exercise you will be using you will be using metal metal cervical matrixcervical matrix. Choose . Choose and adapt the matrix and adapt the matrix according to the tooth according to the tooth contour.contour.
Apply GIC into the cavity and immediately cover with the cervical matrix, remove access material. LIGHT CURE THE RMGIC FOR 20 SECONDS.
Case 1
![Page 34: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/34.jpg)
Finished restoration, DBA was painted Finished restoration, DBA was painted onto the surface of the restoration onto the surface of the restoration and light cured for 20 seconds.and light cured for 20 seconds.
Check the margins, remove any Check the margins, remove any excess material using a pointed excess material using a pointed diamond bur.diamond bur.
Case 1
![Page 35: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/35.jpg)
18 months later18 months later
3 years later3 years later
Case 1
![Page 36: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/36.jpg)
Sharp angled lesion Sharp angled lesion along the gingival margin along the gingival margin under the old bridge.under the old bridge.
Gingival tissue removed from Gingival tissue removed from the lesion with the lesion with trichloracetic acid to trichloracetic acid to control bleeding.control bleeding.
Case 2
![Page 37: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/37.jpg)
Dentin conditioner Dentin conditioner applied – use a brush applied – use a brush for this purpose.for this purpose.
GIC applied and the GIC applied and the matrix is placed.matrix is placed.
Case 2
![Page 38: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/38.jpg)
A thin layer of resin bonding A thin layer of resin bonding agent was applied to seal the agent was applied to seal the surface against changes in surface against changes in water balance. water balance.
Further re-contouring and Further re-contouring and further coats of bonding further coats of bonding agent appliedagent applied
Case 2
![Page 39: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/39.jpg)
The finished restoration 18 The finished restoration 18 years later.years later.
The finished restorationThe finished restoration
Case 2
![Page 40: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/40.jpg)
Composite ResinComposite Resin
AdvantagesAdvantages
Excellent esthetics.Excellent esthetics. Micro-mechanical retention – does not have to Micro-mechanical retention – does not have to
rely on retention features of the cavity. rely on retention features of the cavity.
![Page 41: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/41.jpg)
Composite ResinComposite Resin
Disadvantage:Disadvantage:1. Need excellent moisture control, otherwise: 1. Need excellent moisture control, otherwise:
a. retention is compromised – loss of a. retention is compromised – loss of restorationrestorationb. microleakage – sensitivity, secondary cariesb. microleakage – sensitivity, secondary caries
2. Polymerization shrinkage2. Polymerization shrinkageComposite is applied in thin increments Composite is applied in thin increments (layers).(layers).
![Page 42: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/42.jpg)
What is it?What is it?It is a technique which requires the application It is a technique which requires the application of both composite restoration and Glass of both composite restoration and Glass Ionomer Cement in the same cavity.Ionomer Cement in the same cavity.
Sandwich TechniqueSandwich Technique
![Page 43: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/43.jpg)
Sandwich Technique: Sandwich Technique: Why is it recommended?Why is it recommended?
Glass Ionomer Cement is Glass Ionomer Cement is applied to: applied to:
1.1. Replace the missing Replace the missing dentin.dentin.
2.2. Release fluoride Release fluoride (protect the pulp)(protect the pulp)
3.3. Increase retentionIncrease retention4.4. Reduce microleakage.Reduce microleakage.
Composite is applied to:Composite is applied to:• Replace Enamel and Replace Enamel and
Enhance esthetic.Enhance esthetic.• Provide a better Provide a better
polished surface.polished surface.• Increase abrasion Increase abrasion
resistance.resistance.
![Page 44: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/44.jpg)
StepsSteps
1.1. Choose the appropriate shade of composite Choose the appropriate shade of composite resin for the tooth.resin for the tooth.
2.2. IsolationIsolation3.3. Follow the steps for GIC application.Follow the steps for GIC application.
Place just enough of the GIC to replace the Place just enough of the GIC to replace the missing dentine, keep the enamel free from missing dentine, keep the enamel free from GIC. GIC.
![Page 45: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/45.jpg)
StepsSteps
4.4. i. Lamination of i. Lamination of Conventional GICConventional GIC::a. Etch the GIC & enamel for 15 seconds.a. Etch the GIC & enamel for 15 seconds.b. Wash and dry lightly.b. Wash and dry lightly.c. Apply DBA to GIC and enamel – light cure for c. Apply DBA to GIC and enamel – light cure for
20 seconds.20 seconds.d. Place the composite resin incrementally - light d. Place the composite resin incrementally - light
cure each increment for 20 seconds and the cure each increment for 20 seconds and the final increment for 40 seconds.final increment for 40 seconds. ..
![Page 46: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/46.jpg)
StepsSteps
4.4. ii. Lamination of ii. Lamination of RMGICRMGIC::a. a. Etch the enamelEtch the enamel only for 15 seconds. only for 15 seconds. - It is - It is not necessary to etch the GICnot necessary to etch the GIC because it because it
contains HEMA (resin) which can bond to the contains HEMA (resin) which can bond to the resin in DBA.resin in DBA.
b. Apply DBA to GIC and enamel – light cure for b. Apply DBA to GIC and enamel – light cure for 20 seconds.20 seconds.
c. Place the composite resin incrementally – light c. Place the composite resin incrementally – light cure each increment for 20 seconds and the cure each increment for 20 seconds and the final increment for 40 seconds.final increment for 40 seconds.
![Page 47: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/47.jpg)
StepsSteps
5.5. Polish the restoration using soflex discs.Polish the restoration using soflex discs.6.6. Apply DBA and light cure for 20 seconds.Apply DBA and light cure for 20 seconds.
![Page 48: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/48.jpg)
ENAMEL DENTINE
CEJ
CASE 1
![Page 49: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/49.jpg)
ENAMEL DENTINE
RMGICGIC/RMGIC
CR
OPEN SANDWICH TECHNIQUE
![Page 50: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/50.jpg)
ENAMEL DENTINE
CASE 2
CEJ
![Page 51: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/51.jpg)
ENAMEL DENTINE
CASE 2
CEJ
CR
GIC/RMGIC
CLOSED SANDWICH TECHNIQUE
![Page 52: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/52.jpg)
Mixing Glass Ionomer CementMixing Glass Ionomer Cement
1.1. Hand mixHand mix
a.a. Dispense 1 scoop powder and 1 drop liquid.Dispense 1 scoop powder and 1 drop liquid.
b.b. Divide the powder into equal parts.Divide the powder into equal parts.
c.c. Mix in ½ of the powder into the liquid.Mix in ½ of the powder into the liquid.
By 10 seconds the first part of the powder should By 10 seconds the first part of the powder should be fully mixed.be fully mixed.
d.d. Draw in second half and complete the mixing.Draw in second half and complete the mixing.
By 25 seconds the mix should be complete.By 25 seconds the mix should be complete.
![Page 53: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/53.jpg)
Mixing GlassMixing Glass Ionomer Cement Ionomer Cement
b. Depress plunger.b. Depress plunger.
2. Precapsulated2. Precapsulateda. Tap or shake the capsule to loosen a. Tap or shake the capsule to loosen
the powder.the powder.
![Page 54: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/54.jpg)
c. Click once in capsule c. Click once in capsule applier to activate.applier to activate.
![Page 55: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/55.jpg)
![Page 56: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/56.jpg)
e. Click twice to prime capsule e. Click twice to prime capsule
then syringe.then syringe.
![Page 57: DB2527-ABRASION CAVITY 0809](https://reader035.vdocuments.net/reader035/viewer/2022062417/551e3ad2497959d4398b473b/html5/thumbnails/57.jpg)
Any Questions?Any Questions?