dc measurements
DESCRIPTION
DC Measurements. Module-1. Objectives. Define voltage and give its unit of measurement. Identify the two different types of voltmeters. Connect a voltmeter in a circuit to measure voltage. Use a digital multimeter to measure voltage. Define current and give its unit of measurement. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/1.jpg)
DC MeasurementsModule-1
![Page 2: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/2.jpg)
Objectives Define voltage and give its unit of measurement. Identify the two different types of voltmeters. Connect a voltmeter in a circuit to measure voltage. Use a digital multimeter to measure voltage. Define current and give its unit of measurement. Connect an ammeter in a circuit to measure current. Use a digital multimeter to measure current. Define resistance and give its unit of measurement. Determine the resistance value using the resistor
color code chart. Use a digital multimeter to measure resistance.
![Page 3: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/3.jpg)
Module Contents
Topic Page No.
1.1 Introduction 4
1.2 Voltage Measurement 51.3 Current Measurement 81.4 Resistance Measurement 111.5 Lab Activity 1 131.6 Lab Activity 2 161.7 Module Exercise 17
![Page 4: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/4.jpg)
Introduction
wall outlet/power socket Batteries
![Page 5: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/5.jpg)
There are two types of voltages
DC: Direct CurrentIn DC, the flow of electric charge is only in one direction. DC is Produced by a battery and is used to power portable devices such as the cell phones, iPods, etc. AC: Alternating CurrentIn AC, the flow of electric charge periodically reverses direction. AC Is generated in a powerplant and is delivered to the electric outlets in your home and buildings. Washing machines, television, water heater etc. operate on ac.
Note: See Video
![Page 6: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/6.jpg)
DC Devices Sources- Solar
Panel
![Page 7: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/7.jpg)
AC Device Source – Power Plant
![Page 8: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/8.jpg)
Voltage Voltage is the electric force that
drives current around an electric circuit.
Unit of voltage is volt, Symbol is ‘V’.
![Page 9: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/9.jpg)
Voltage Measurement
![Page 10: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/10.jpg)
Voltage MeasurementA voltmeter is used to measure voltage.There are two types of voltmeters
Analog Voltmeter Digital Voltmeter
![Page 11: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/11.jpg)
Multimeter The analog multimeter
measures voltage by deflecting a needle against a scale.
A digital multimeter displays the voltage value in digits.
Note: Voltage and other electrical quantity may also be measured using a digital multimeter (DMM)
![Page 12: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/12.jpg)
Steps for Measuring voltage Set the multimeter knob to
read voltage (dc or ac) and select the range.
Connect the two probes with proper polarity in parallel with the component/device, across which the voltage is to be measured.
Switch ON the meter and read the voltage.
Note: For unknown voltages, it is better to begin with the biggest range, and then reduce the range as this will protect the meter
![Page 13: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/13.jpg)
Symbol for Voltmeter
![Page 14: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/14.jpg)
Task 1: To connect a voltmeter in a circuit to measure voltage
Connect a voltmeter to measure the total voltage supplied by the battery.
Connect voltmeters to measure the voltages across each of the three bulbs.
![Page 15: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/15.jpg)
Current Current is a measure of the flow of electrons in an
electric circuit. Current is measured in amperes (A) and is denoted
by the symbol ‘I’
http://www.ndted.org/EducationResources/HighSchool/Electricity/amperage.htm
![Page 16: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/16.jpg)
Current Measurement Current can also be measured with a
multimeter.
![Page 17: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/17.jpg)
Steps for Measuring current Set the multimeter knob to read current
(dc or ac) and select the range.
Break the circuit and insert the multimeter probes across the break tocomplete the circuit.
Switch ON the meter and read the current http://
www.ndted.org/EducationResources/HighSchool/Electricity/amperage.htm
![Page 18: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/18.jpg)
Task 2 To connect an ammeter in a circuit to measure current
![Page 19: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/19.jpg)
Resistance Resistance is a measure of the
opposition to the flow of current. It is measured in ohms (Ω) and is denoted by the symbol ‘R’
Is resistance good or bad?
![Page 20: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/20.jpg)
Is resistance good or bad?
Bad Resistance can be both good and bad. If we are
trying to transmit electricity from one place to another through a conductor, resistance is undesirable in the conductor.
Good The heat that is generated from electric heaters
or the light that we get from light bulbs is due to resistance
![Page 21: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/21.jpg)
Resistance Measurement
![Page 22: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/22.jpg)
Resistance Measurement
Color1 Color2 x 10Color3
Calculate the resistance of the resistor which has the following color code:
Red Green Red Gold
R = Color1 Color2 x 10Color3 = 2 5 X 102
= 2500Ω = 2.5kΩ. Tolerance= + 5%. Therefore, R =2.5kΩ+ 5%
http://www.ealnet.com/m-eal/resistor/resistor.htm
![Page 23: DC Measurements](https://reader036.vdocuments.net/reader036/viewer/2022062323/56816335550346895dd3c114/html5/thumbnails/23.jpg)
Ohm’s law V=I x R
› R = Resistance› V = Voltage› I = Current
http://www.ndted.org/EducationResources/HighSchool/Electricity/ohmslaw.htm