dco 06078902a ous qrg us€¦ · enter fastfacts®. press fastfacts ®smartbutton. select...

Enter Code Mode.

Insert test strip to turn on meter.“OneTouch UltraSmart” will appear,followed by code number.

See Code Number.

Code number will appear on display.

Match Code Numbers.

Compare code number on meter displaywith code number on test strip vial. Ifmatching, begin testing. If not matching,see Step 4.

STEP 1

STEP 2

STEP 3

Select Test Mode.

Use Arrow button to select “Apply Blood” for fingertip sampleor “Alternate Site” for forearm andpalm samples. Do Not select ControlSolution mode when testing blood.Failure to select correct test modemay cause blood glucose averagesto be incorrect.

Insert Test Strip.

Push it all the way in until it will go nofurther. Meter turns on automatically.

Very high blood glucose level exceeding 600 mg/dL.

There may be a problem with meter. 1) Turn off meter. Enter Set-up mode.

Reset meter before testing; or2) Turn off meter. Enter Set-up mode.

Reset language, date, time andmeter code.

If Error 1 message continues, Do Notuse the meter. Call LifeScan CustomerService at 1 800 227-8862 for areplacement meter.

Used test strip inserted or problemwith meter. Repeat test with new teststrip.

Blood or control solution sampleapplied before “Apply Blood”,“Alternate Site”, or “Control Solution”appeared on display. Repeat test withnew test strip.

Fill Confirmation Window.

Be sure confirmation window is fullbefore meter counts down. If windowis not full before meter beginscountdown, repeat test with newtest strip. Do Not add more blood tothe test strip; discard the test stripand retest.

Accurate Results in Just 5 Seconds.

1) New meter not coded. Code meter; or

2) Meter lost power briefly and entered Set-up mode. Reset codenumber.

Test result with suggestion to checkketone levels.

Test result is from 20 through 59 mg/dLwith meal or snack reminder.

Blood glucose level lower than 20 mg/dL.

Code Meter.

Scroll up or down with Arrow button .Meter is ready for testing.

Apply Blood

Code

---Check Code

Comment? Press OK

414mg/dL

Sep 14-02 9:45 am

Check Ketones

35mg/dL

Sep 14-02 9:30 am

Comment? Press OKDo you need a snack?

WARNING

Below 20 mg/dL

LOW

GLUCOSE

Alternate Site

104mg/dL

Sep 8-02 10:30 am

Code the meter before using it for the first time and every timeyou change to another vial of OneTouch® Ultra® Test Strips.

Test Summary

Note: Before testing, wash hands with warm, soapywater. Rinse and dry thoroughly.

STEP 1

STEP 4STEP 2

STEP 3

STEP 4

STEP 5

Display Symbols and MessagesCoding the Meter WARNING

Above 600 mg/dL

HIGH

GLUCOSE

WARNING

See Owner’s Booklet

Error 1

Call customer service

WARNING


Error 2

Meter or strip problem

Please repeat test

WARNING


Error 3

Meter not ready

Please repeat test

©2006 LifeScan,Inc. Milpitas,CA 95035Rev. date: 4/2006 AW 060-789-02A

LifeScan Customer Service toll-free numbers:English 1 800 227-8862Español 1 800 381-7226

Visit the LifeScan Web site at:www.LifeScan.com

Quick Reference Guide

AW 06078902A

WARNING: If mg/dL does not appearwith the test result, call LifeScanCustomer Service at 1 800 227-8862.

Touch and hold drop of blood tothe narrow channel in the topedge of the test strip.

Apply Sample.

CAUTION: Matching the code on the meter and the code onthe test strip vial is essential to obtain accurate results. Eachtime you test, check to make sure the code numbers match.

(Example)

(Example)

(Example)

(Example)

(Example)(Example)

DCO_06078902A_OUS_QRG_US 4/11/06 3:38 PM

Enter FastFacts®.

Press FastFacts® SmartButton®.

Select “Logbook” from Menu.

Press .

Press SmartButton® for type of electronic logbook entry(exercise, health, medication, or food).

Enter Set-Up Mode.

Press and hold down BOTH andbuttons together for at least two

seconds.

Select Display Language.

To use English, press . To useanother language, scroll to itwith . Press .

Set Date and Time.

Scroll with and press wheneach is correct.

Complete Basic Meter Set-Up.

Select “No” and press . Basic meter Set-up is complete. Select “Yes” andpress to customize other metersettings. See Owner’s Booklet and nextpanel for details.*

Add Comment.

Select comment from menu. Press with comment highlighted.

Save Comment.

Scroll to “Save”. Press .

Complete Blood Test.

Start with test result on display.

Press OK Button.

You may add food, health, or exercise comment.

Select Comment Type.

Use to highlight type

and press .

Battery power too low for testing.Replace batteries immediately.

Temperature outside system operating range. Do Not perform a test until the meter and test stripsreach a temperature within the operating range (43–111˚F/6–44˚C).

Adding Comment to Test Result

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

Making Logbook Entry

Accessing Your LogbookBasic Meter Set-Up

FoodSmartButton®

MedicationSmartButton®

HealthSmartButton®

ExerciseSmartButton®

To review test results in logbook memory, use FastFacts®.STEP 1

STEP 1

STEP 2

STEP 2

STEP 3

STEP 3

STEP 4

FastFacts® WARNING


Batteries!

You MUST replacethe batteries now

+

Battery power getting low. Replacebatteries as soon as possible.

WARNING


Low Batteries!

You should replacethe batteries soon

+

WARNING


Meter is outside ofoperating

temperature range

Test not possible

135mg/dL

Sep 8-02 10:30 am

Comment? Press OK

Exer

Save

Health

Food

--------

--------

Aft Brkft

Gluc. 135 CommentSep 8-02 10:30 am

Gluc. 135 CommentSep 8-02 10:30 am

Exer

Food

Save

Feel HypoIllnessMenses

--------

HealthStress

----------------

Sep 8-02 10:30 amGluc. 135 Comment

Exer

Health 1Health 2

Food

Save

Bef LunchStress

Set up in?

English

Francais

ItalianoDeutsch

Español

PortuguêsNederlands

Basic Set-up

Date

Time 12:00 am

Sep 15-02

YesNo

Do you want to customizeyour meter now?

Logbook

Insulin Intake

FastFacts

Hypo Info

Health Checks

Glucose AnalysisGlucose by Meals

Food Averages

Logbook

Sep 8-02 10:30 am

Bef LunchGlucose 125 mg/dL

Before Exer

Logbook

Sep 15-02 3:30 pm Exercise

Hard 00:10

Three possible reasons:

1) Possible high glucose in a testenvironment near low end of operatingtemperature range (43–111˚F/6–44˚C).Retest in a warmer environment.

or2) Sample improperly applied.

Review blood application andrepeat test with new test strip.

or3) Test strip damaged or moved

during testing. Repeat test withnew test strip.

WARNING


Error 4

Strip problem

Please repeat test

WARNING


Error 5

Invalid test

Please repeat test

Quick Reference Guide - Cover

*Note: It is important that the time of day is correct and that your medication set-upand mealtimes are set according to yourpersonal daily schedule. Otherwise, someFastFacts® information will not be correct.

1) Test strip damaged or confirmationwindow not full. Retest with newtest strip.

2) There may be a problem with themeter. If the error message appearsagain, call LifeScan CustomerService at 1 800 277-8862.

Use to scroll.

Scroll Back through Results.

Meter and Electronic Logbook In One

QuickReference

Guide

See inside forinstructions on usingOneTouch® UltraSmart®.

Important:Before testing, readdetailed instructionsin your OneTouch®

UltraSmart® Owner’sBooklet.

(Example)

DCO_06078902A_OUS_QRG_US 4/11/06 3:38 PM

dco 06078902a ous qrg us€¦ · enter fastfacts®. press fastfacts ®smartbutton. select...

Documents