dear beachcomber hot tub owner - the cover guy™ - hot ......dear beachcomber hot tub owner: thank...

Dear Beachcomber Hot Tub Owner:

Thank you for purchasing your new Beachcomber Hot Tub. In a small town just tenmiles north of the US border in our Canadian Factory in Surrey, BC, your hot tub wasbuilt to the latest and highest industry standards in performance.

My vision for a new, in home appliance began back in 1978. Those were the days whenJohn Travolta was launching his acting career in films like “Saturday Night Fever” -we were also busy with the beginnings of our newest, 21st century in home appliance.Since then, thousands of Beachcomber owners around the world have enjoyed withfamily and friends the benefits of using a Beachcomber Hot Tub - no phones, no TV, andno distractions. Those things are important to all of us in our increasingly busy world. Itis still my vision to help families come closer together with this unique home appliancethat waits for you any time you need it, right in the comfort of your own backyard.

It is my personal desire that you get the most from your Beachcomber Hot Tub. Thereare so many benefits available to you now that you did not have before! When you arerelaxing in your hot tub in your backyard, you will realize that warm, bubbly water hastremendous healing and massaging powers for your mind, body and soul.

Please take the time to read through this manual and understand the operations of yournew hot tub. The pleasurable experiences you’ll enjoy will give you many years oftension relief, enjoyment, and relaxation with the ones you love when you follow thesimple guidelines in this book.

We are constantly improving and upgrading every Beachcomber Hot Tub we build. Aspart of the Beachcomber Family of owners, your thoughts and ideas are important to usand we welcome your suggestions. Use the address below to write to us. If you know ofa friend or relative that is looking for a hot tub, we appreciate your referral and will doall we can to welcome them into the family of Beachcomber Hot Tub owners.

Yours truly,

Keith ScottFounder, Beachcomber Hot Tubs

P.S. Please write or call if you know of someone who is looking for a hot tub. I would bepleased to send you a special Beachcomber gift!

Beachcomber Hot Tubs, Home Office13245 Comber WaySurrey, BC, Canada, V3W 5V8

BEACHCOMBER HOT TUB OWNER’S GUIDE

TABLE OF CONTENTS

SECTION 1 INSTALLING YOUR BEACHCOMBER HOT TUB

SECTION 2 STAY SAFE AND ENJOY YOUR HOT TUB

SECTION 3 HOW TO USE AND MAINTAIN YOUR HOT TUB

SECTION 4 CARING FOR YOUR BEACHCOMBER INVESTMENT

SECTION 5 PROGRAMMABLE CONTROL INSTRUCTIONS

SECTION 6 HOW TO KEEP YOUR WATER CLEAN AND FRESH

SECTION 7 BEACHCOMBER ANSWERS YOUR QUESTIONS

SECTION 8 REGISTER YOUR HOT TUB AND KEEP IT WORRY FREE

SECTION 9 YOUR HOT TUB DETAILS

GLOSSARY OF TERMS

InstallingYour

BeachcomberHot Tub

The location of your new Beachcomber Hot Tub is very important. You can share inour years of experience with award winning back yard garden retreats with some goodadvice in the pages that follow. As you read through, think about where your hot tubwill be located and make a few notes. We’ll guide you through the process as to whereand how your hot tub will give you the most enjoyment for you and your family.

SECTION 1

1 - 1 Installing your Beachcomber Hot Tub

WELCOME TO THE BEACHCOMBER FAMILY

It is our desire to help you get the mostfrom your new Beachcomber Hot Tub.Now, sit back and read about your newhome appliance, and rest easy that youhave the support behind you to enjoy yourhot tub experience.

Your owner’s guide explains theoperations of your new Beachcomber HotTub. It includes valuable information. Ifyou still have questions after reading thisbook, your Beachcomber dealer is just aphone call away. And, if you ever have aquestion or concern, you can call NorthAmerican Customer Care at 1.800.663.6557.

Take the time to read this book. In somecases, failure to follow procedures in thisbook could result in damage that may notbe covered by your guarantee. Pleaseconsult your local dealer with furtherquestions.

ENJOY YOUR BACK YARD EXPERIENCE

Many people today do not use their backyards. But with a Beachcomber Hot Tub,you can enjoy the sun, and the stars.Romantic evenings are enhanced whenyou can look up and see the sky aboveyou as you soak down deep into soothingwaters.

INSTALL YOUR HOT TUB CLOSE TO YOUR BACK DOOR

We recommend that you have your hottub installed about ten feet from your backdoor. In cooler weather, it’s morecomfortable getting to and from the hottub. It also means less wire to install forthe certified electrician. Keeping your hottub close to your home can minimizeinconveniences like wind and blowingleaves.

PREPARE THE SPOT FOR YOUR HOT TUB

Built as an integrated unit, yourBeachcomber Hot Tub is fully portable. Ifyou move, you can take it with you as youwould with any other home appliance.That’s why it’s important to have easyaccess for installation or removal. Makesure that you have a flat, level spot foryour hot tub.

Patio

BBQ

Ideal Hot TubLocation

DeckChairsDeck

Chairs

Following are some ideas for you to helpyou prepare the site. A concrete pad isusually ideal. But if you choose to useanother base for your hot tub, theseproducts are widely available at yourhome renovation store.

LIFT ‘N STORE MAKES COVER REMOVAL EASY

If you will be installing a Lift ‘n Storecover remover, you’ll need a few extrainches of clearance. Ask your localBeachcomber dealer for the specificationson the Lift ‘n Store.

A NOTE ON WOOD DECKING

A full hot tub can weigh several thousandpounds when filled with water. It’s up toyou to check with your local city hall forbuilding codes when installing on a raiseddeck. If you are sinking your hot tub into adeck, make sure that the safety step (onProtec models) fits the installation, or theaccess doors (on portable models) willopen without obstruction.

MAKE WAY FOR THE DELIVERY CREW

Here are three easy steps to check beforeyour hot tub is delivered. Depending onwhat your installation looks like, these aresome of the most common situations wehave found, and wanted to pass themalong to make your installation easier.

Installing your Beachcomber Hot Tub 1 - 2

Concrete Pad Railroad Ties

Patio Tiles Interlocking Bricks

Wood Decking Gravel/Crushed Rock

Cast Cement Stepping Stones

ProtecTM equipped model shown with externalpower source and Lift n’ Store Cover Remover


1. Check the width clearance from yourhouse to your fence, and check thatyour hot tub will fit through yourgate. Make note of overheadclearance from eaves, gutters ortrees.

2. Make sure doghouses, children’stoys and bikes, firewood and otherobjects are out of the way. Checkyour gas meter location to make surethe way is clear.

3. Your delivery crew needs to knowabout stairs and turns for dollyaccess. Make some notes for thembefore they arrive.

NOTES TO THE QUALIFIED INSTALLER

Your Beachcomber Hot Tub is a powerfulappliance. We recommend you use aqualified electrician to install your hot tubsafely and correctly. They should followthe electrical code for your area. It isalways necessary to install a ground faultinterrupter (GFCI). This breaker isdesigned to shut down your hot tub in the event of an emergency.

USE COPPER CONDUCTORS ONLY

A connector marked “ground” is providedwithin the control box. To reduce the riskof electrical shock, connect this connectorto the grounding terminal of the electricalservice panel with continuous copper wire,equivalent in size to the conductorssupplying this equipment. “Bonding lugs”are also provided on the equipmentenclosure to connect a minimum No. 6AWG solid copper conductor between thehot tub and any metal surfaces, that are

closer than 5 feet to the hot tub. To reducethe risk of electrical shock, connect thebonding lugs in accordance with yourarea’s electrical code.

CONNECTING YOUR HOT TUB TO THEPOWER SUPPLY PANEL

Locate the electrical access on the left andright side of the hot tub in the black kickplate. Route the wires through the sidethat is most convenient and plug the sidenot used with the 1” PVC plug provided.


Beachcomber builds two types ofconstruction styles. No matter whichmodel you have chosen, yourBeachcomber Hot Tub is designed to give you many years of relaxation and

enjoyment. We refer to both styles ofconstruction in this booklet, and wewanted to outline these two importantfeatures of Beachcomber Hot Tubs beforeyou read the rest of this booklet.

The first style is called Portable. Thismodel is built with the power sourceinside the cabinet. The Portable is adurable, quiet, space saving hot tub, andhas been a top performer since its launch

in 1996. New engineering techniques haveallowed Beachcomber designers to fit allcomponents in a compact format in ahollow, plastic enclosure behind thePortable door.

PORTABLE

Available step for Portable Hot Tubs

WARNINGElectrical Hazard

No user serviceable parts insideContact your dealer or authorizedservice center for service.

BEACHCOMBER HOT TUBSBEACHCOMBER HOT TUBS


The second style is called Protec. Thismodel gives you many different optionswhen looking at more complicatedinstallation sites. In-deck, longer plumbingruns, sunken, complimentary poolinstallations and other ways of putting in ahot tub can be candidates for the Protecconstruction option.

Since 1978, Protec has been exclusive to Beachcomber.

Ask your dealer for more informationabout Beachcomber’s two constructionstyles.

WARNINGElectrical Hazard

No user serviceable parts inside

Contact your dealer or authorized

service center for service.

BEACHCOMBER

HOT TUBS

PROTEC


Installation Instructions for:700 SERIES HUSH PUMPTM SYSTEM1. Carefully unpack equipment and

place equipment in front of protecinterface plate on hot tub.

2. Secure green ground wires to theground terminal on the ManagementSystem.

3. Plug hot tub light cord into lightreceptacle on the ManagementSystem.

4. Plug ozone generator (optional) cord into ozone receptacle on theManagement System.

5. Plug pump1 cord into pump1receptacle on the ManagementSystem.

6. Plug Hush PumpTM cord in HushPumpTM receptacle on theManagement System.


8. Plug blower (optional) cord intoblower receptacle on theManagement System.

9. Secure both plumbing kits 1(suctions) unions to pump1 andpump2’s inlet ports, ensure gasketsare in place.

10. Secure both plumbing kits 2 (1speed pump returns) to pump1 and

pump2 outlet ports, ensuring gasketsare in place.

11. Secure plumbing kit 3 (hush suction)union to Hush PumpTM.

12. Secure plumbing kit 4 (hush pumpreturn) unions to Hush PumpTM outletport and the Management Systeminlet port, ensuing gaskets are inplace.

13. Secure plumbing kit 7 (heater return)to the Management System, ensuregasket is in place.

14. Secure plumbing kit 8 (blower fitting)to blower, ensuring gasket is inplace.

15. Carefully slide equipment forward tomeet unions on interface plate,ensure all gaskets are in place, thensecure unions.

16. Run control panel wire from interfaceplate underneath the ManagementSystem, then in thru the access holein bottom of the ManagementSystem, and then plug into panelreceptacle on circuit board.

17. Slide thermistor probe intocompression fitting on interfaceplate. Insert up to the marker on thewire to make sure it is in all the way.Note: if probe is not installedcorrectly, the temperature read-outwill not be accurate.

2 2

1

1

3 7

8

4


Installation Instructions for:700 SERIES 2 SPEED PUMP SYSTEM1. Carefully unpack equipment and

place equipment in front of protecinterface plate on hot tub.

2. Secure green ground wires to theground terminal on the theManagement System.


4. Plug ozone generator (optional) cordinto ozone receptacle on theManagement System.



7. Plug blower (optional) cord intoblower receptacle on theManagement System.

8. Secure both plumbing kits 1(suctions) unions to pump1 andpump2’s inlet ports, ensure gasketsare in place.

9. Secure plumbing kit 5 (pump return)unions to 2 speed outlet port and the

Management System inlet port,ensuing gaskets are in place.


11. Secure plumbing kit 8 (blower fitting)to blower, ensuring gasket is inplace.

12. Secure plumbing kit 2 (1 speedpump return) to pump 2, ensuringgasket is in place.

13. Carefully slide equipment forward tomeet unions on interface plate,ensure all gaskets are in place, thensecure.

14. Run control panel wire from interfaceplate underneath the ManagementSystem, then in thru the access holein bottom of the ManagementSystem, and then plug intoreceptacles on the right side of thecircuit board.

15. Slide thermistor probe intocompression fitting on interfaceplate. Insert up to the marker on thewire to make sure it is in all the way.Note: if probe is not installedcorrectly, the temperature read-outwill not be accurate.

1

5

6

8

21


Installation Instructions for:500 SERIES HUSH PUMPTM SYSTEM

1. Carefully unpack equipment andplace equipment in front of protecinterface plate on hot tub.





6. Plug Hush PumpTM cord in HushPumpTM receptacle on theManagement System.

7. Secure plumbing kit 1 (suction)union to 1 speed pump inlet port,ensuring gaskets are in place.

8. Secure plumbing kit 2 (pump return)union to 1 speed pump outlet port,ensuring gasket is in place.

9. Secure plumbing kit 3 (hush suction)union to Hush PumpTM.

10. Secure plumbing kit 4 (hush pumpreturn) unions to Hush PumpTM outletport and the Management Systeminlet port, ensuing gaskets are inplace.


12. Carefully slide equipment forward tomeet unions on interface plate,ensure all gaskets are in place, thensecure unions.

13. Run control panel wire from interfaceplate underneath the ManagementSystem, then in thru the access holein bottom of the ManagementSystem, and then plug into panelreceptacle on circuit board.

14. Slide thermistor probe intocompression fitting on interfaceplate. Insert up to the marker on thewire to make sure it is in all the way.

Note: if probe is not installedcorrectly, the temperature read-outwill not be accurate.

2

1

4

3 7


Installation Instructions for:300/500 SERIES 2 SPEED PUMP SYSTEM

1. Carefully unpack equipment andplace equipment in front of protecinterface plate on hot tub.




5. Plug 2 speed pump cord into pump1receptacle on the ManagementSystem.

6. Secure plumbing kit 1 (500 Series)or 9 (300 Series) (suction) unions to2 speed pump inlet ports, ensuregaskets are in place.

7. Secure plumbing kit 5 (pump return)unions to 2 speed outlet port and the

Management System inlet port,ensuing gaskets are in place.

8. Secure plumbing kit 6 (heater return)union, ensure gasket is in place.

9. Carefully slide equipment forward tomeet unions on interface plate,ensure all gaskets are in place, thensecure.

10. Run control panel wire from interfaceplate underneath the ManagementSystem, then in thru the access holein bottom of the ManagementSystem, and then plug intoreceptacles on the right side of thecircuit board.

11. Slide thermistor probe intocompression fitting on interfaceplate. Insert up to the marker on thewire to make sure it is in all the way.

Note: if probe is not installedcorrectly, the temperature read-outwill not be accurate.

1 - 500 Series 6

5

9 - 300 Series

MOUNTING STEP BRACKETS ONPROTECT EQUIPPED HOT TUBS

All screws are pre-installed from thefactory for mounting your Protec safetystep to your hot tub. The brackets tomount the step to the hot tub are factoryinstalled inside the step walls, and are ableto slide freely from side to side.

To install, line up the safety step to thewall of the hot tub. Bend the brackets outto match the holes for the screws, andsimply use the Allen key provided to screwthe 20 mm bolts into the holes to securethe step to the hot tub.

Your step must be secured to your hot tubat all times, for maximum safety:


Hardware is installedon both sides of yoursafety step.

Stay SafeAnd Enjoy YourBeachcomber

Hot Tub

It is our desire to have you enjoy the highest level of safety with your newBeachcomber Hot Tub. There are precautions you can take to make sure your familyand friends enjoy a pleasurable soak every time. Take a few minutes to read andunderstand the following pages regarding safety.

SECTION 2

2 - 1 Stay Safe and Enjoy your Hot Tub

A BEACHCOMBER HOT TUB OFFERS YOUMANY BENEFITS

Your new Beachcomber Hot Tub offersyou many benefits that you will discover inthe months and years to come. One ofthem is Hydrotherapy. With the regularuse of your hot tub, you can relieve achesand pains and enjoy the pleasure of totalrelaxation. We recommend that you useyour Beachcomber Hot Tub for about 20minutes every other day.

At Beachcomber, we are committed toongoing change and innovations. In thelast five years, these are some of thebeneficial features that you will find onyour hot tub. These have taken years toconcept, design, test, perfect andmanufacture. You enjoy the “best of thebest” when you buy Beachcomber! Webuild our hot tubs with your needs inmind. We wanted to share with you someof the safety features of your newBeachcomber Hot Tub that you will cometo appreciate as you use your hot tub.

BODY MOLDED STEPS FOR EASIERENTRY AND EXIT

Beachcomber designers are always look-ing for ways to make our hot tubs moreefficient. So we included steps inside ourhot tubs to make it easier for you to findyour way during exit and entry. With theirrounded, contoured edges, you can resteasy knowing that you won’t bump yourfeet or your knees on any hard edges.

WARNING

To avoid injury, exercise care whileentering or exiting your hot tub.

BODY MOLDED HAND GRIPS FOR SAFETY

Your hot tub has been molded from thefactory with ergonomically designed handgrips. Completely unique to Beachcomber,these grips enhance your bathing bygiving you a sure grip when you exit orenter the hot tub. There are no rails orrods to worry about coming loose - justmolded acrylic, as a part of the whole hottub shell.

Beachcomber’s handgrips make entry andexit safe and easy in our 300, 500 and700 Series hot tubs.

TEXTURED FOOTWELL AND STEPSURFACES

Beachcomber designers took the time toput a heavy duty, textured surface oncritical areas of your hot tub. Whereveryou step or cool off, you’ll find thisconvenient, pleasing texture that remindsyou that every Beachcomber Hot Tub isbuilt for safety as well as comfort. It’simportant to us to give you the best safetyfeatures available.

Stay Safe and Enjoy your Hot Tub 2 - 2

THE CONVENIENCE OF DIGITAL CONTROLS

Beachcomber’s “Energy Saver” controlstransmit your command to the pump andmotor with a tiny, electrical charge. Thiscontrol panel is completely sealed by atough, impenetrable plastic product calledLexan. Your hot tub may be equipped witha reversible display (Digital 3000) so thatyou can read it from in or out of the hottub. Your hot tub may also be equipped(700 series only) with a secondary controlpad for the jets and the light accessiblefrom inside the hot tub. This “conveniencecontrol” allows you to operate criticalfunctions without moving from your seat.

FLOOR DRAIN JUST LIKE YOURBATHTUB IN YOUR HOME

You will never have to worry about yourback, bending into your hot tub to bail outwater - the drain does it all for you. Justlike your bathtub at home, yourBeachcomber Hot Tub drains by gravity.

HEATSHIELD COVER CHILD PROOF LOCKS

This is just one more way thatBeachcomber offers features that help tokeep your hot tub a safe, fun way to relaxand relieve your daily stress. With lockabletabs on your cover, you can secure downthe cover so that children and pets can’tget in. It’s a simple concept, with a verypractical application.

Beachcomber’s heatshield child lockshelp prevent unwanted entry.

MICROFILTER DESIGN FOR MAXIMUM FILTRATION

Beachcomber’s unique microfilter is acomponent of your hot tub that you willappreciate the first time you use it. Whenit comes time to clean your filters, simplylift them out of the built-in filter canister.The microfilter makes hot tub care simpleand effortless (See Page 2-3).


It’s easy to remove or replace your filterswith Beachcomber’s Microfilter.

THE PROTEC ENERGY SAVER OPTION

Beachcomber offers you options. If yourhot tub is equipped with the Protec option,you will see that you have a safety stepincluded with your hot tub. This sturdystep makes it easy to enter and exit, andalso acts as a cover and a sounddampener for your hot tub equipment. Theconvenience of easy access is part of theProtec option. Your step doubles as asafety feature, and a functional cover forhot tub equipment.

SUPERIOR COMFORT BODY MOLDS

Not only is your Beachcomber Hot Tubcomfortable, it is safe in another way - byhaving soft, body molded curves. Youwon’t find any hard, angular edges tobump your knees on. Every hot tub thatgoes through our design room is testednot only for durability, strength andperformance, but also for ultimatecomfort.

BEACHCOMBER HOT TUB SAFETY TIPS

Your Beachcomber Hot Tub has beendesigned and built with the most advancedsafety features available on the markettoday. We take every precaution we can tomake it the safest you can buy, however,there are a few things you can do toprotect yourself from accidents. Somebasic safety tips should be followed whenyou install your new hot tub, to ensurethat you have a safe, fun place to enjoyhot water with your family and friends.

KEEP STANDARD EQUIPMENT INTACT

Your Beachcomber Hot Tub comesstandard with safety features. One of themis the plastic fitting on the suction(s) inthe footwell. This fitting should never beremoved. If it needs attention, pleasecontact your authorized BeachcomberDealer Service Center.

WARNING

Do not use your hot tub unless all suctionguards are installed to prevent body andhair entrapment.

Stay Safe and Enjoy your Hot Tub 2 - 4

This will eliminate the chance of hairentrapment by either the Microfilter or thesuction fitting(s). Don’t forget that altering(apart from the service technician fromyour Beachcomber store) your hot tubcould void your warranty.

Beachcomber’s suction fittings helpcirculation of your water for maximumfiltration and hydrotherapy.

CHILDREN AND YOUR HOT TUB

Like any body of water, a hot tub can be adangerous place for children.

WARNING

Children should not use your hot tubwithout adult supervision.

Inspect your children’s pool and spa toysto ensure that there are no moving partsor other breakables that can come apart.See your Beachcomber Hot Tub store forapproved toys for use in a hot tub.

Never allow your children to submergethemselves in your hot tub. With thehigher temperatures of the hot tub (100 For 38 C), it is not recommended for yourchildren (or yourself) to submerge deeperthan your collarbone. Make sure that yourchildren have a proper cooling down time- they should not stay in your hot tub formore than 15 minutes at a time, and mayrequire you to lower the temperature ofyour hot tub.

We recommend that you not submergebelow your collarbone area.

WALK, DON’T RUN!

Just like the rules at your local swimmingpool, never run around or into your hottub! Avoid injury by taking care whileentering and exiting your hot tub.

WATER TEMPERATURE

We recommend that the water in your hottub should not exceed 104 F or 40 C.Comfortable temperatures at or below thislevel are considered safe for a healthyadult. Lower temperatures arerecommended for extended use and foryoung children or the elderly.


Avoid using your Beachcomber Hot Tubalone. Longer exposure could cause acondition called Hyperthermia (elevatedbody temperature). Hyperthermia occurswhen the internal temperature of the bodyreaches several degrees above normal(98.6 F or 37 C). Symptoms includedizziness, fainting, drowsiness andlethargy (sluggishness). If you feel any ofthese symptoms, exit the hot tubimmediately. Some of the effects ofimpending hyperthermia includeunawareness of the impending hazard,failure to perceive the heat or the need toexit the hot tub, the inability to exit, fetaldamage in pregnant women, andunconsciousness with a danger ofdrowning.

ALCOHOL, DRUGS AND YOUR HOT TUB

The use of alcohol, drugs or medicationcan greatly increase the risk of fatalhyperthermia in a hot tub.

WARNING

Do not use drugs or alcohol before orduring the use of your hot tub, to avoidunconciousness and possible drowning.

Some medications may cause drowsiness,while others may affect heart rate, bloodpressure and circulation. If you are usingprescription medication, consult yourPhysician before using your BeachcomberHot Tub.

WARNING

People with infectious diseases should notuse a hot tub.

PREGNANT WOMEN AND HOT TUBS

We recommend that pregnant women donot use a hot tub. Higher watertemperatures have a high potential forcausing fetal damage during the earlymonths of pregnancy. Pregnant orpossibly pregnant women should avoidusing the hot tub.

WARNING

People using medications and/or havingan adverse medical history should consulta physician before using a hot tub.

OTHER ELECTRICAL APPLIANCES

Your Beachcomber Hot Tub is a powerfulelectrical appliance. To reduce the risk ofelectrical shock, do not allow any otherappliances such as lights, telephones,radios, televisions, hair dryers etc. within10 feet /3 meters of your hot tub.

Beachcomber Hot Tubs are industryapproved.

L I S T E D

WARNOCK HERSEY

How To UseAnd Maintain Your

BeachcomberHot Tub

Follow these easy steps to get your hot tub up and running. Your dealer will come andstart your hot tub with you, and walk you through its operations. And if you ever havea question or concern, you can call your local dealer for support, or callBeachcomber’s North American Customer Care line at 1.800.663.6557.

SECTION 3

3 - 1 How to Use and Maintain your Hot Tub

STARTING YOUR BEACHCOMBER HOT TUB

After your hot tub is installed by aqualified installer, your Beachcomberdealer will come and start up your hot tubfor you. But before they arrive at yourhome to do the “wet start” with you, youcan fill your hot tub - it does not requirespecial water - it is designed to be filledwith water directly from your garden hose.

Note: Do not use your hot tub until adisinfectant level has been established.

When you first fill your hot tub, anddepending on where you live and the typeof water supply you have, the water mayappear somewhat green once the hot tubis filled. This is normal! Beachcomber’swater treatment program will soon giveyou clear, sparkling water to enjoy withfamily and friends! The steps that followare outlined for you to show you how yourdealer will first start your hot tub. It’s bestto allow your dealer to do this for the first time to show you the simple steps of start up.

WARNING

Always make sure that there is enoughwater in your hot tub. Low water levelscan damage your equipment and void yourguarantee.

STEP 1: PREPARING THE EQUIPMENT

Switch the power at the main powersupply panel to the “Off” position. Open allknife valves to allow the water to fill theequipment for proper water flow. Makesure that the drain fitting is closed. Make

sure the filters are in place in themicrofilter / upfront system (Seeillustration on page 3 - 3).

STEP 2: FILLING THE HOT TUB

Fill the hot tub with water from yourgarden hose, to the correct level.

SPECIAL NOTE:

There may be air inside the equipment thatneeds to be bled to prevent damage to theinternal equipment. To bleed the air, openthe black air bleed valve one half turn torelease any trapped air.

Correct water level for Beachcomber’s Microfilter:

halfway up the skimmer opening

How to Use and Maintain your Hot Tub 3 - 2

Once the sputtering has stopped and asteady flow of water is coming out, closethe air bleed valve (hand tighten only).Hand tighten any unions if needed, andvisually check the equipment for drips.

STEP 3: STARTING THE PUMP

Switch the power at the main powersupply panel to the “ON” position. Yourpump will come on at a low speedautomatically. You will hear some bubblingas air is forced out of the lines. Wait untilall air is out before switching pumps tohigh speed.

Your hot tub is preset from the factory andwill heat automatically to 100F / 38Cdegrees, taking from six to twelve hours toheat up to temperature. See Section 5 forinstructions on using your digital controls.

DRAINING YOUR HOT TUB

Before draining your hot tub, turn off theswitch at the main power supply panel.Ensure that the sanitizer level is at 0 ppmbefore draining. Ensure that all knifevalves are in the open position.

Beachcomber’s gravity drain works thesame way as the drain in the bathtub inyour home. Attach your garden hose bythreading it onto the drain/valve, and placethe other end of the hose at a suitabledraining site. Open the drain valve on yourhot tub and drain the water. This processwill take from 1 to 4 hours, depending onthe size of your hot tub.

WARNING:

Running your hot tub without water, orwith low water levels will damage your hottub’s equipment and void your guarantee.Ensure all power is turned off at the mainpower supply panel before draining.

SPECIAL NOTE:

In areas with cold climates, Beachcomberrecommends that you time your drainingactivity in the early spring and in the latefall to avoid winter draining. Winterdraining is not recommended wheretemperatures go below freezing. Shouldyou need to drain your hot tub during thewinter, contact your Beachcomber dealerfor advice.

AIR BLEEDNOZZLE


AFTER DRAINING IS COMPLETED

Remove the garden hose from the drainfitting. The knife valves should still be inthe open position. This is your opportunityto care for your hot tub to maintain itsappearance and cleanliness. Remove yourfilters and clean with Filter Pure / Cure(alternately). Clean the Acuralux acrylicsurface of your hot tub with a few dropsof Tub Clean to remove scum lines. Yourhot tub cover can be cleaned andprotected with a damp cloth usingCoverAll. These cleaning products areavailable at your Beachcomber dealer; besure to follow the directions on the bottlefor maximum performance.

WARNING:

Do not leave your water treatmentproducts outside. If they are subject toextreme heat or cold, their effectivenesscan be impaired making them unusable.Always keep these and other chemicalsOUT OF REACH OF CHILDREN.

We recommend that after draining orcleaning your hot tub that you put theheatshield cover back on. Avoid extendeddirect sunlight exposure on the acrylic surface, which can cause surface fading or cracking, which could void your warranty.

BEACHCOMBER’S FILTRATION SYSTEM

Beachcomber offers one of the mostadvanced, compact and efficient filtrationsystems available on the market today.Beachcomber’s Microfilter is the result ofyears of testing, research and design.After perfecting this system, it will keepyour water clean and allow yourBeachcomber Hot Tub to do what it’s builtto do- to relieve your daily stress, and helpyou relax and wind down after a long day.Keeping your filtration system running andperforming as it should is easy.

FloatingWeir

Basket

FilterElement

MICROFILTER SYSTEM


CLEAN FILTERS MEAN CLEAN WATER

Extend the life of your filters with monthlycleaning. Your filters should last forseveral years if maintained properly. Afteryour hot tub is drained, place your filtersin a bucket with enough water tosubmerge the filters. Beachcomber offersa specialized cleaning canister, availablefrom your local store (shown at right).

Use Filter Pure or Filter Cure when it’stime to clean your filters. Following thedirections on the bottles will ensure thatyour filters are in top shape. Filter Pureremoves organic waste from your filters,and Filter Cure removes calcium deposits.Both bather waste and calcium depositswill reduce your filter’s performance.Alternating monthly between these twoproducts ensures that your filters will keepyour hot tub water clean. Visit your localstore to reorder new filters for yourBeachcomber hot tub.

FILTER CLEANINGMAINTENANCE SCHEDULE

Use the handy schedule on the followingpage to keep a record of your hot tub filtercleaning. This schedule will also help youto keep track of alternating Filter Cure andFilter Pure to maximize your filter’sperformance.

Beachcomber’s Microfilter cartridge iseasy to remove for cleaning. Werecommend you keep two cartridges, onefor cleaning and one ready to use.


TWO YEAR FILTER CLEANING MAINTENANCE SCHEDULE

MONTH YEAR DATE CLEANED FILTER CURE FILTER PUREJanuaryFebruaryMarchAprilMayJuneJulyAugustSeptemberOctoberNovemberDecemberJanuaryFebruaryMarchAprilMayJuneJulyAugustSeptemberOctoberNovemberDecember


GETTING THE MOST FROM YOUR HOT TUB JETS

Your Beachcomber Hot Tub jets are fullyadjustable. You can personalize your ownmassage in your favorite seat, by turningthe outside ring either counterclockwisefor a stronger flow, or clockwise for asmaller flow. To turn them off, simply turnall the way clockwise to stop the flow ofwater. The outer ring is grooved for you togive a quick and easy grip for adjustment.These quality fixtures are very lowmaintenance; cleaning them once everythree months to remove debris should besufficient.

MANY MASSAGE INSERTSARE REMOVEABLE

You can remove your Beachcomber HotTub massage insert for cleaning veryeasily. Turn them counterclockwise untilyou feel sudden resistance, then turn a bitharder to pop out the insert. When youreplace the massage insert, turn themback until they lock into place. Many of themassage inserts in your hot tub areinterchangeable from one WaterportTM

location to another.

QUALITY CONSTRUCTION MAKESSMOOTH OPERATION

Some Beachcomber massage inserts runon a bearing system. These bearings allowthe jets to spin freely. Others run with acontinuous stream of water as a non-removeable fixed unit.

THE WATERPORTTM STORY

Since 1978, Beachcomber has been on theforefront of leading hot water massagetechnology. From the “ecsta-seat”,introduced in 1992, to the “vertesage”neck massaging jet introduced in 1998,Beachcomber has continued to develop aunique system of “WaterportsTM” that giveyou many types of tension relievingtherapy for three areas of your body thatbenefit from frequent massage; your neck,back and feet. These parts of your bodytake a beating every day, and need to begently, and sometimes vigorouslymassaged to improve circulation.

Massaging will change your outlook on life- soothing, pulsating action softens thetissue and creates endorphins - the brain’snatural chemical sedative - giving you afeeling of well being and relaxation. Thesefeelings are very important to a healthylifestyle. All of us feel that we are far toobusy. It’s true - we are - and in this worldof email, DVD, CD, Cell Phones, Pagers,Palm Pilots and Infrared, we need achance to get away and recuperate.Massaging and water therapy is becomingincreasingly important! We need to bemassaged to relieve that daily stress.

On

Off


WHAT ARE WATERPORTS?

What you need and deserve is informationand education, because awareness for hottubs is still very low. We are in a youngindustry - that’s why we are committed tothe education process. Your dealer canprovide that knowledge by educating youabout massaging and body therapy withWaterPortsTM. Here’s a quick look at theterminology for Beachcomber’sWaterPortsTM.

WATERPORTS GIVE YOU FLEXIBILITY

WaterPortsTM are linked to more than justjets - it’s linked to interchangeability,flexibility, massage customization, properflow and design and much more. With theWaterPortTM option available to you, youcan adjust your massage to give yourneck, back and feet the massage they needto make you feel good all over.Interchange your massage inserts to suitthe type of massage you require to relievetension and stress that builds up in yourbody day after day.

EASE OF USE OF THE MASSAGE INSERTS

Beachcomber massage inserts come inSmall, Medium, Large and Extra Large.The Medium, Large and Extra Largemassage inserts are interchangeable. Eachmassage insert has a notched outer ringso that you can adjust the volume andpressure of water coming through tofurther customize your massage! Yourdealer keeps a stock of these massageinserts for you to choose the option ofcustomizing your jetting configurations.

There are a standard number ofWaterPortsTM that come with eachBeachcomber model from the factory.You’ll find these listed in Beachcomber’ sHome Hot Tub Buyer’s Guide, availablefrom your local Beachcomber store. Yourdealer is capable of recommending whichmassage inserts go where for themassage you want. After all, they seethese hot tubs every day and they’ve triedthem all. They’ve heard what hundreds ofother customers have to say, and havesold many of these equipped with theirrecommendations. If you still have furtherquestions about the WaterPortsTM system,feel free to call your Beachcomber store.They would be glad to assist you to showyou how the WaterPortsTM sytem can helpyou customize your massage.


As you get to know your BeachcomberHot Tub, you’ll develop favorite seatingarrangements with customized massages.Experiment with your WaterportsTM to findthe massage that best meets your needs.With about twenty minutes in yourBeachcomber hot tub every other day,you’ll notice the calming effect that yourhot tub will have on your body, and youwill come to anticipate it to help relieve thedaily stress of your busy life. After all,you’ve earned it!

WARNING

Prolonged immersion in your hot tub maybe injurious to your health.

AIR CONTROLS ADD TO YOUR MASSAGE EXPERIENCE

Every Beachcomber Hot Tub is equippedwith either one or two air controls. Thesespecial valves can be in the open (turncounterclockwise) or closed (turnclockwise) position. In the open position,the air control(s) allow forced air from thepump to be injected into the piping andout through the jets - the bubbles that arecreated give you a more vigorousmassage. You can adjust the opening ofthese air control(s) to customize yourmassage. In the open position, your hottub on high speed will look like theinviting, exciting personal massage centerthat it is!

Threaded WaterPortsTM

opening in the hot tubacrylic, allowinginterchangeability ofmassage inserts

Massage Insert

Jet orifice(sevenjet modelshown here)

Beachcomber’s Air Control valves

Caring For YourBeachcomber

Hot TubInvestment

It’s very important to us to show you how to get the most from your new BeachcomberHot Tub. With proper care, your hot tub will perform and give you countless hours ofenjoyment. Read this section carefully to make sure that you get what you paid for -relaxation and daily tension relief!

SECTION 4

CARING FOR THE HOT TUB CABINETRY

Native to North America, western redcedar is one of the most highly prizedwoods in the world. West Coast FirstNations called western red cedar “long lifegiver” because its wood, bark and rootssupplied so many of their artistic andmaterial needs. Builders admire its long,straight grain and resistance to naturaldecay. That’s why it’s so important to keepit looking new. You can do that byapplying Nu Wood two step process to the cabinetry once a year. Nu Wood iseasy to use, and it’s available at your local Beachcomber Hot Tub store. Ask forit by name.

Avoid applying varnish, shellac or surfacesealant to the wood. They tend to reactwith the natural chemicals in the cedarand could spoil the finish with yellowing,peeling or flaking. Your new BeachcomberHot Tub’s cabinet is treated with a specialsealant at the factory.

CARING FOR YOUR ECO-THERMHEATSHIELD COVER

Your Beachcomber Heatshield is madefrom the toughest marine grade vinyl, andwill last through many seasons. It is

designed to insulate, save money andelectricity, and protect your hot tub. Thebest protection you can offer yourheatshield from the sun’s UV rays is“CoverAll”. Simply spray it on and wipe itdown with a clean cloth. Try to do thiswhen it’s slightly overcast and not too hotoutside. This will give the CoverAll time topermeate and protect.

WARNING:

Your heatshield is not a place to play forchildren, or a place to rest for a dog orcat. Although Beachcomber’s heatshieldsare designed to withstand a reasonablesnow load, they will not endure addedweight over time. Do not allow yourchildren or pets to play on top of yourheatshield.

LOCKING TABS PROTECT SMALLCHILDREN

Your heatshield cover comes with lockingtabs with keys as standard equipment.These locktabs are a special feature forfamilies with small children. As with anybody of water, there is always a drowningrisk for small children. Never let yourchildren play on or close by an open hottub unsupervised. Beachcomber’s locktabs will give you the option of lockingdown your hot tub cover to keep the littlechildren out - and keep them safe. Thisspecial feature is also very handy in windysituations. Many hot tubs are installed onthe banks of lakes and rivers, and beingable to lock down the heatshield is anadded benefit to those that insist onhaving a view of the water while soakingin hot water!

4 - 1 Caring for your Beachcomber Investment

Caring for your Beachcomber Investment 4 - 2

A SPECIAL NOTE ABOUT HEATSHIELDS

When shocking your Beachcomber HotTub, we recommend that you open oneside of your cover to allow your sanitizerto oxidize and gas off. Doing this will helpto protect the underside of your cover, andit will allow your sanitizer to clean yourhot tub water.

CARING FOR YOUR HOT TUB’S ACRYLIC SURFACE

Your Beachcomber Hot Tub is built withAcuralux Acrylic. It will stand the test oftime - it’s tough and extremely durable. It’scolorfast properties will make it one of thetoughest surfaces in your home! There isvery little maintenance required to keepyour hot tub Acuralux surface clean andnew looking. When you drain your hot tub,wipe the surface down with Tub Clean.About 8 to 10 drops on a damp, cleancloth or chamois per wall would besufficient. You can also use Tub Cleanwhile your hot tub is full; after a heavyusage period, you can clean the water linewith a soft sponge and a few drops of TubClean. Be careful not to come into contactwith the water.

WARNING

This acrylic spa shell is made of a highquality impact thermoplastic.

Never leave your hot tub in the sunlightwith the cover off for an extended periodof time (longer than a normal twentyminute soak). Damage to the hot tub’s

acrylic surface can occur. Overexposure tosunlight will void your factory warranty.Always leave your hot tub protected withthe cover on when you are not using thehot tub.

WARNING

Be careful not to use glassware aroundyour hot tub. Breakage could cause injuryand damage to your hot tub surface.Acrylic or plastic ware is generallyunbreakable and much safer than glass.

ProgrammableControl

Instructions

Depending on the Beachcomber model you purchase, you’ll have different optionsavailable to you with Beachcomber’s digital controls. The operations of your hot tubcan be enjoyed at the touch of a button. This section is designed to walk you throughthe details of the operation of the Beachcomber Energy Saver control pad.

SECTION 5

Start UpWhen your hot tub is powered up, it begins runningin standard mode. Standard mode automaticallyheats to 100˚F/37.5˚C or your desired temperature.Pressing the pad switches the spa to economymode, which is not recommended with a hush pumpbecause it draws very little current and is designedto operate 24 hours a day.

TimeYou will see the words “SET TIME” flashing on thedisplay. To set the time, press , then .Pressing or once will begin changingthe time in one-minute increments. Press either padto stop the time from changing. Press toenter the correct time into the system.

Optional Filter Cycle ProgrammingWhile you are not required to set filter cycles, if youwant to change them, press within3 seconds. “SET START FILTER 1” will appear on thedisplay. Press or to reset to filterstart time. When “SET HEAT” is on the display, presson to warm the water during filtering, orpress “off” to disable the heater. Press ,to see “SET STOP FILTER 1” and adjust the timewith or as done above. Pressto see “SET START FILTER 2” and proceed as above.Pressing will enter the new filter cycle timesinto the system and display the current watertemperature. At the start of each cycle, the turbo (ifinstalled) will turn on for 30 seconds to clean out

the air channel. The heater and the ozone generator(if installed) will run for the duration of the filtercycle. *Note: With the hush pumpTM option, it is notnecessary to alter the filter cycles as it is designedto operate 24 hours a day.

Water Temperature (80˚F-104˚F)/(26˚C-40˚C)Press either or once to display thelast temperature that was set. If either pad ispressed within 3 seconds, the temperature settingwill increase or decrease in 1˚F increments. Actualwater temperature will reappear on the display afterchanging the temperature setting.

Time and Temperature InversionPress or , then 1 within 3seconds to invert the time and temperature display.Press the same sequence to set back.

Massage 1Press the 1 pad to turn pump 2 on and off. Ifleft on, the pump will turn off after 15 minutes.


Turbo (Optional)Press the pad to cycle through the highest tolowest setting, then to turn off the turbo. If leftrunning, the turbo automatically turns off after 15minutes.

5 - 1 Programmable Control Instructions/Digital 3000

DIGITAL 3000 MANAGEMENT SYSTEMHUSH PUMPTM VERSION

Panel LockPress the pad, the emply space between“warm” and “light” pads, then the pad within 3seconds. When locked, the display will show thetemperature you have chosen along with the “lock”symbol. To unlock, press the pad, the emptyspace between “warm” and “light” pads, then the

pad within 2 seconds. The lock symbol willdisappear and all panel pads will work again.On hot tubs with turbo option: Press,

within 3 seconds. When locked, the displaywill show the temperature you have chosen alongwith the “lock” symbol. To unlock, press the

pads within 2 seconds. The locksymbolw ill disappear and all panel pads will workagain.

Temperature LockPress or then press the the emptyspace between “warm” and “light” pads, then the

pad within 3 seconds. when locked, thedisplay will show the temperature you have chosenalong with the “lock” symbol if oris pressed. To unlock, press the pad, theempty space between “warm and light” pads, thenthe pad within 2 seconds. The lock symbolwill disappear and all panel pads will work again.On hot tubs with turbo option: Press or

then the pad within 3 seconds.When locked, the display will show the temperatureyou have chosen along with the “lock” symbol. Tounlock, press the pads within 2seconds. the lock symbol will disappear and allpanel pads will work again.

Standby ModePress or then within 3 seconds toprevent the hot tub from operating at any time.Standby mode should be used when replacing thefilter. All hot tub functions will be disabled except forfreeze control. Press any button to resume spaoperation.

DISPLAY MESSAGESDISPLAY FLASHES “OH”.“Overheat” - The hot tub has shut down. Either thewater has reached 112o F./44oC, or the high limit

sensor has detected 118˚ F/48oC at the heater. DO NOT ENTER THE WATER. Remove the hot tubcover and allow water to cool. At 110˚F/43oC, the hottub should automatically reset. If the hot tub doesnot reset, then turn off all power to the hot tub andcontact your dealer or service organization.DISPLAY FLASHES “FLO”.“Flow” (Flashing) - Flow of water is inhibited.Check and open flow valves. Check for correct water level. Clean filter.DISPLAY FLASHES “FLO”.“Flow” (Not flashing) - A pressure switch hasmanfunctioned.Contact dealer or service organization.DISPLAY FLASHES “COOL”.“Cool” - Water temperature is more than 20oF/7oCbelow the temperature you last set.No action required. Spa is functioning properly.DISPLAY FLASHES “ICE”.“Ice” - Potential freeze condition is detected. No action required. Pump(s) will automaticallyactivate regardless of hot tub’s status.DISPLAY FLASHES “Sn1”.“Sensor1” - Hot tub is shut down. Hi-limit sensor isnot working.Contact your dealer or service organization.DISPLAY FLASHES “Sn3”.“Sensor 3” - Hot tub is shut down. Watertemperature sensor is not working.Contact your dealer or service organization.DISPLAY FLASHES “Stby”“Standby” - Hot tub is in standby mode. All hot tubfunctions are disabled except for freeze control.Press any button to resume operation.

WARNING! SHOCK HAZARD! NO USERSERVICEABLE PARTS.

Do not attempt service of this control. Contact yourdealer or service organization for assistance. Followall owner's manual power connection instructions.Installation must be performed by a certifiedelectrician and all grounding connections must beproperly installed.

Programmable Control Instructions/Digital 3000 5 - 2


Start UpWhen your hot tub is powered up, it begins runningin economy mode, which means that the heater willonly operate during the preset filter cycles. Thissetting is designed for periods of little or no hot tubuse, but continues to filter twice a day and maintainwater quality. Pressing the pad switches thespa to standard mode which automatically heats to100oF/37.5oC or your desired temperature.

TimeYou will see the words “SET TIME” flashing on thedisplay. To set the time, press , then .Pressing or once will begin changingthe time in one-minute increments. Press either padto stop the time from changing. Press toenter the correct time into the system.

Optional Filter Cycle ProgrammingWhile you are not required to set filter cycles, if youwant to change them, press within3 seconds. “SET START FILTER 1” will appear on thedisplay. Press or to reset to filterstart time. When “SET HEAT” is on the display, presson to warm the water during filtering, orpress “off” to disable the heater. Press ,to see “SET STOP FILTER 1” and adjust the timewith or as done above. Pressto see “SET START FILTER 2” and proceed as above.Pressing will enter the new filter cycle timesinto the system and display the current watertemperature. At the start of each cycle, the turbo (if

installed) will turn on for 30 seconds to clean outthe air channel. The heater and the ozone generator(if installed) will run for the duration of the filtercycle.

Water Temperature (80˚F-104˚F)/(26˚C-40˚C)Press either or once to display thelast temperature that was set. If either pad ispressed within 3 seconds, the temperature settingwill increase or decrease in 1˚F increments. Actualwater temperature will reappear on the display afterchanging the temperature setting.

Time and Temperature InversionPress or , then 1 within 3seconds to invert the time and temperature display.Press the same sequence to set back.

Massage 1Press the 1 pad once to activate the low speedof pump 1. Press the pad’s low speed turns off after4 hours. The pump’s high speed turns off after 15minutes.


Turbo (Optional)Press the pad to cycle through the highest tolowest setting, then to turn off the turbo. If leftrunning, the turbo automatically turns off after 15minutes.

DIGITAL 3000 MANAGEMENT SYSTEMTWO SPEED PUMP VERSION


Panel LockPress the pad, the emply space between“warm” and “light” pads, then the pad within 3seconds. When locked, the display will show thetemperature you have chosen along with the “lock”symbol. To unlock, press the pad, the emptyspace between “warm” and “light” pads, then the

pad within 2 seconds. The lock symbol willdisappear and all panel pads will work again.On hot tubs with turbo option: Press,

within 3 seconds. When locked, the displaywill show the temperature you have chosen alongwith the “lock” symbol. To unlock, press the

pads within 2 seconds. The locksymbolw ill disappear and all panel pads will workagain.

Temperature LockPress or then press the the emptyspace between “warm” and “light” pads, then the

pad within 3 seconds. when locked, thedisplay will show the temperature you have chosenalong with the “lock” symbol if oris pressed. To unlock, press the pad, theempty space between “warm and light” pads, thenthe pad within 2 seconds. The lock symbolwill disappear and all panel pads will work again.On hot tubs with turbo option: Press or

then the pad within 3 seconds.When locked, the display will show the temperatureyou have chosen along with the “lock” symbol. Tounlock, press the pads within 2seconds. the lock symbol will disappear and allpanel pads will work again.

Standby ModePress or then within 3 seconds toprevent the hot tub from operating at any time.Standby mode should be used when replacing thefilter. All hot tub functions will be disabled except forfreeze control. Press any button to resume spaoperation.

DISPLAY MESSAGESDISPLAY FLASHES “OH”.“Overheat” - The hot tub has shut down. Either thewater has reached 112o F./44oC, or the high limit

sensor has detected 118˚ F/48oC at the heater. DO NOT ENTER THE WATER. Remove the hot tubcover and allow water to cool. At 110˚F/43oC, the hottub should automatically reset. If the hot tub doesnot reset, then turn off all power to the hot tub andcontact your dealer or service organization.DISPLAY FLASHES “FLO”.“Flow” (Flashing) - Flow of water is inhibited.Check and open flow valves. Check for correct water level. Clean filter.DISPLAY FLASHES “FLO”.“Flow” (Not flashing) - A pressure switch hasmanfunctioned.Contact dealer or service organization.DISPLAY FLASHES “COOL”.“Cool” - Water temperature is more than 20oF/7oCbelow the temperature you last set.No action required. Spa is functioning properly.DISPLAY FLASHES “ICE”.“Ice” - Potential freeze condition is detected. No action required. Pump(s) will automaticallyactivate regardless of hot tub’s status.DISPLAY FLASHES “Sn1”.“Sensor1” - Hot tub is shut down. Hi-limit sensor isnot working.Contact your dealer or service organization.DISPLAY FLASHES “Sn3”.“Sensor 3” - Hot tub is shut down. Watertemperature sensor is not working.Contact your dealer or service organization.DISPLAY FLASHES “Stby”“Standby” - Hot tub is in standby mode. All hot tubfunctions are disabled except for freeze control.Press any button to resume operation.




Start UpWhen your hot tub is powered up, it willautomatically heat and maintain 100oF/37.5oC oryour desired temperature.

Temperature Adjustment (80˚F-104˚F)/(26˚C-40˚C)Press the pad to display the temperaturepreviously set. This set temperature is flashed onthe display. In a few seconds, the numbers will stopflashing, and the display will show the actualtemperature. Pressing the pad a second time willcause the set temperature to increase or decreasedepending on what direction was last chosen. Eachpress to follow will change the set temperature inthe same direction. If the opposite direction isdesired, release the pad and let the display revert tothe actual water temperature. Press the pad todisplay the set temperature, and again to make thetemperature change in the desired direction.

MassagePress the pad to turn the pump on and off. Ifleft on, the pump will turn off after 15 minutes ofuse.

LightPress the pad the turn the hot tub light onand off. The light will automatically turn off after 4hours of use.

Standby ModePress then withnin 3 seconds toprevent the hot tub from operating at any time.Standby mode should be used when replacing thefilter. All hot tub functions will be disabled excpet forfreeze control. Press any button to resume hot tuboperation.

Preset Filter CycleDue to the energy efficiency of the hugh pumptmoption, your hot tub is set to automatically filteritself 24 hours a day, although there are other filterduration’s, it is not recommended to change thissetting. Filter duration is programmable at the top-side panel. Press the pad, then the padwithin 3 seconds and “F2” will be displayed on thepanel. (“F2” is the default filter time and indicates a2 hour cycle.) Continue pressing the pad tocycle through the rest of the filter time options; “F4”- 4 hours, “F6” - 6 hours, “F8” - 8 hours, “F0” - 10hours, and “FC” - 24 hours. Press to selectthe number of cycles. Display will show “C1” or“C2”. During filtration the ozone generator (ifinstalled) will run.

DIGITAL 2000 MANAGEMENT SYSTEMHUGH PUMPTM VERSION


DISPLAY MESSAGES

DISPLAY FLASHES “OH”.

“Overheat” - The hot tub has shut down. Either thewater has reached 112o F./44oC, or the high limitsensor has detected 118˚ F/48oC at the heater. DO NOT ENTER THE WATER. Remove the hot tubcover and allow water to cool. At 110˚F/43oC, the hottub should automatically reset. If the hot tub doesnot reset, then turn off all power to the hot tub andcontact your dealer or service organization.

DISPLAY FLASHES “FLO”.

“Flow” - A pressure switch has manfunctioned.Contact your dealer or service organization.

DISPLAY FLASHES “Sn”.

“Sensor” - Hot tub is shut down. The high-limitsensor or water temperature is not working.Contact your dealer or service organization.

DISPLAY FLASHES “Sb”

“Standby” - Hot tub is in standby mode. All hot tubfunctions are disabled except for freeze control.Press any panel button to resume operation.




Start UpWhen your hot tub is powered up, it willautomatically heat and maintain 100oF/37.5oC oryour desired temperature.

Temperature Adjustment (80˚F-104˚F)/(26˚C-40˚C)Press the pad to display the temperaturepreviously set. This set temperature is flashed onthe display. In a few seconds, the numbers will stopflashing, and the display will show the actualtemperature. Pressing the pad a second time willcause the set temperature to increase or decreasedepending on what direction was last chosen. Eachpress to follow will change the set temperature inthe same direction. If the opposite direction isdesired, release the pad and let the display revert tothe actual water temperature. Press the pad todisplay the set temperature, and again to make thetemperature change in the desired direction.

MassagePress the pad to activate the pump’s lowspeed, again for the pump’s high speed, and oncemore to turn off the pump. The pump’s low speedturns off after 2 hours. The pump’s high speed turnsoff after 15 minutes of use.

LightPress the pad the turn the hot tub light onand off. The light will automatically turn off after 4hours of use.

Standby ModePress then withnin 3 seconds toprevent the hot tub from operating at any time.Standby mode should be used when replacing thefilter. All hot tub functions will be disabled excpet forfreeze control. Press any button to resume hot tuboperation.

Preset Filter CycleDue to the energy efficiency of the hugh pumptmoption, your hot tub is set to automatically filteritself 24 hours a day, although there are other filterduration’s, it is not recommended to change thissetting. Filter duration is programmable at the top-side panel. Press the pad, then the padwithin 3 seconds and “F2” will be displayed on thepanel. (“F2” is the default filter time and indicates a2 hour cycle.) Continue pressing the pad tocycle through the rest of the filter time options; “F4”- 4 hours, “F6” - 6 hours, “F8” - 8 hours, “F0” - 10hours, and “FC” - 24 hours. Press to selectthe number of cycles. Display will show “C1” or“C2”. During filtration the ozone generator (ifinstalled) will run.

DIGITAL 2000 MANAGEMENT SYSTEMTWO SPEED PUMP VERSION


DISPLAY MESSAGES


“Overheat” - The hot tub has shut down. Either thewater has reached 112o F./44oC, or the high limitsensor has detected 118˚ F/48oC at the heater. DO NOT ENTER THE WATER. Remove the hot tubcover and allow water to cool. At 110˚F/43oC, the hottub should automatically reset. If the hot tub doesnot reset, then turn off all power to the hot tub andcontact your dealer or service organization.

DISPLAY FLASHES “FLO”.

“Flow” - A pressure switch has manfunctioned.Contact your dealer or service organization.


“Sensor” - Hot tub is shut down. The high-limitsensor or water temperature is not working.Contact your dealer or service organization.

DISPLAY FLASHES “Sb”

“Standby” - Hot tub is in standby mode. All hot tubfunctions are disabled except for freeze control.Press any panel button to resume operation.




START UP

When your hot tub is first powered up, it willautomatically heat and maintain 100˚ F / 35˚ Cuntil you change the set temperature.

TEMPERATURE ADJUSTMENT

Press the pad to display the temperaturepreviously set. This set temperature is flashedon the display. In a few seconds, the numberswill stop flashing and the display will show theactual water temperature (minimumtemperature +80O F - maximum temperature+104O F). Pressing the pad a second time willcause the set temperature to increase ordecrease depending on what direction was lastchosen. Each successive press will change theset temperature in the same direction. If theopposite direction is desired, release the padand let the display revert to the actual watertemperature again. Press the pad to display theset temperature, and again to make thetemperature change in the desired direction.

LIGHTS/JETS

Press the pad to cycle through the light and jets features. The operatingsequence is as follows: 1) low-speed pump, 2)low-speed pump and light, 3) high-speedpump and light, 4) high-speed pump only, and5) off. The low-speed pump automatically turnsoff after 2 hours. The high-speed pump stopsafter 15 minutes. The light turns off after 4hours of use.

PRESET FILTER CYCLES

Your hot tub will automatically filter itself twicea day. The first filter cycle will start one minuteafter the hot tub is powered up. The secondfilter cycle will begin twelve hours later. Filtercycle duration is 2 or 6 hours long, and is setat the time of delivery. The low-speed pumpand ozone generator (if installed) will runduring filter cycles. Contact your local dealer tochange the cycle.

DIGITAL 1000 ENERGY SAVER


STANDBY MODE

The hot tub can be disabled when the filterneeds to be replaced. Press the “Set” pad thenthe “Lights/Jets” pad and the display will show“Sb”. All hot tub functions will be disabledexcept for freeze control. Press any panelbutton to resume hot tub operation.

DISPLAY MESSAGES


“Overheat” (hot tub is deactivated). The hot tubhas shut down. Either the water has reached112o, or the high limit sensor has detected 118o

at the heater. DO NOT ENTER THE WATER.Remove the hot tub cover and allow the waterto cool. At 110o, the hot tub shouldautomatically reset. If the hot tub does notreset, then shut off power to the hot tub andcall your dealer.

DISPLAY FLASHES “FL”.

“Flow”. The pressure switch is not working.Call your dealer.


“Sensor” (hot tub is deactivated). The high-limit sensor or water temperature sensor is notworking. Call your dealer.

DISPLAY FLASHES “Sb”.

“Standby” mode (hot tub is deactivated). Allhot tub functions are disabled except for freezecontrol. Press any panel button to resume hottub operation.


Do not attempt service of this control. Contactyour dealer or service organization forassistance. Follow all owner's manual powerconnection instructions. Installation must beperformed by a certified electrician and allgrounding connections must be properlyinstalled.

How To Keep Your Hot Tub Water

Clean And Fresh

Every Beachcomber store offers you a complete water treatment program. From freecomputer water analysis, to all the treatment products you’ll need, your local storecan help you keep your water clean and fresh for every hot tub party you’ll have!This section gives you useful tips on how to care for your hot tub water.

SECTION 6

6 - 1 How to Keep your Hot Tub Water Clean and Fresh

CLEANING YOUR HOT TUB WATER

You need to keep your hot tub clean andready to use. When you enter your hottub, you bring in as much contaminant as50 people would in a normal sizedswimming pool! Because your hot tub issuch a small, enclosed environment, itneeds to be a sanitary place. Weaccomplish this with a simple three stepprocess:

1 - Balance2 - Filtration3 - Sanitation

The water that comes from your tap athome is fine for showers or bathing,because it is drained immediately afteruse. In a hot tub, your water is used forup to three months. Hot water is a goodbreeding ground for bacteria, so sanitizingbecomes necessary, as well asmaintaining a specific mineral balance.Having that mineral balance in placeensures that the water, which is naturallycorrosive to metal, will not cause damageto the hot tub equipment. We recommendmonthly water testing.

WARNING

Maintain water chemistry in accordancewith manufacturer’s instructions.

WARNING

Please be careful with chemicals - damageto the surface of the hot tub can occur dueto the improper use of chemicals such astrichlor or chlorine, chemical tablets, acidsor hot tub cleaners. Do not let undissolvedchemicals lie on the surface of the hot tub.This could invalidate your guarantee.Improper water chemistry balance candamage the hot tub and invalidate yourguarantee.

FILL HOT TUB WITH WATER

Once the hot tub has been filled to thecorrect level and pumps are primed andrunning, you can begin to treat the wateraccording to your Beachcomber WaterCare Program.

Consult your local Beachcomber dealer forspecific water care instructions.

How to Keep your Hot Tub Water Clean and Fresh 6 - 2

WATER TESTING

Your Beachcomber Store is equipped toperform a thorough analysis of your hottub water. Take a one liter sample to yourstore and they will advise you on theproducts necessary to properly balanceand care for your hot tub. Unbalanced hottub water can quickly damage yourequipment. Your Beachcomber store willadvise you on how to protect yourinvestment.

BALANCE

Hot tub water must have the correctchemical balance. Unbalanced water canirritate eyes, corrode the equipment, leavemineral deposits, and decrease theeffectiveness of the sanitizer.

Balanced water means establishing properbalance among Total Alkalinity, pH,Calcium Hardness and Total DissolvedSolids.

For a thorough analysis of your hot tubchemical balance, just bring a watersample to your Beachcomber Dealer. Theywill test your hot tub water sample forfree.

SHOCKING

Hot tub water should be shocked once aweek. This will ensure any organic wastesare oxidized and the hot tub water iscrystal clear. BROMATE, LITHCHLOR, orSPA CHLOR should be used to shock yourhot tub.

The sanitizer level should be raised to 10ppm (parts per million). If your test kitonly reads to 5 ppm you can still get anapproximate reading by running the test,then removing half of the test water in thevial and replacing it with tap water.Multiply the new reading by two.

The best time to shock your hot tub is atthe end of the day while the hot tub is notbeing used. Do not use your hot tub untilthe bromine level is below 6 ppm orchlorine level is below 5 ppm.

NOTE: Remove your hot tub cover beforeadding any chlorine or bromine and allow15 minutes of circulating before replacingthe cover.

If you have more specific questions aboutthe water in your hot tub, bring a 1 litersample to your Beachcomber Store fortesting.

DRAINING YOUR HOT TUB

Because a hot tub holds a relative smallamount of water, contaminants such asbody oil, perspiration, dirt, hair, etc., maybecome quite concentrated. For thisreason, the water should be drained andreplaced about every two to three monthsdepending on use.

6 - 3 How to Keep your Hot Tub Water Clean and Fresh

CARE & BALANCING TOTE SIZE

1 - Spa Resist 500 g/1.1 lbs

1 - Spa Protect 500 g/1.1 lbs

1 - Spa Plus 600 g/1.2 lbs

1 - Spa Minus 800 g/1.6 lbs

1 - Filter Pure 500 ml/16 fl.oz

1 - Filter Cure 500 ml/16 fl.oz

1 - Spa Soft (Canada Only) 600 g/1.3 lbs

1 - Tub Clean (US Only) 500 ml/16 fl.oz

1 - Sponge

1 - Measuring Cup

1 - Guide to Clean & Simple Hot Water

1 - Fragrance

TWO PART BROMINE TOTE SIZE

1 - Bromide 500 ml/16fl.oz

1 - Bromate 600 g/1.3 lbs

1 - Eliminate #1 500 ml/16 fl.oz

1 - Eliminate Plus #2 500 ml/16 fl.oz

1 - Purezyme ‘3’ 500 ml/16 fl.oz

1 - Spa Blue 500 ml/16 fl.oz

1 - Foam Free 500 ml/16 fl.oz

1 - Bromine Test Kit

1 - Sponge

1 - Measuring Cup


1 - Fragrance

Beachcomber offers 6 Clean & Simple Care programs in convenient totes, to simplify maintenance. An economical way to provide your needs in treatment andconditioning products.

How to Keep your Hot Tub Water Clean and Fresh 6 - 4

LITHCHLOR TOTE SIZE

1 - Lithchlor 500 g/1.1 lbs






1 - Tub Clean 500 ml/16 fl.oz

1 - Chlorine Test Kit

1 - Sponge

1 - Measuring Cup


1 - Fragrance

CARE-FREE TOTE SIZE

1 - Care-Free 600g/1.3 lbs

1 - Care-Free Boost 500 g/1.1 lbs

1 - Spa Resist 500 g/1.1 lbs

1 - Spa Protect 500 g/1.1 lbs

1 - Spa Minus 800 g/ 1.6 lbs

1 - Spa Soft (Canada Only) 600 g/1.3 lbs

1 - Tub Clean (US Only) 500 ml/16 fl.oz

1 - Care-Free Test Kit

1 - Sponge

1 - Measuring Cup


1 - Fragrance

SPA CHLOR TOTE SIZE

1 - Spa Chlor 500 g/1.1 lbs






1 - Tub Clean 500 ml/16 fl.oz

1 - Chlorine Test Kit

1 - Sponge

1 - Measuring Cup


1 - Fragrance

BROMINE DISC TOTE SIZE

1 - Bromine Discs 400 g/.8 lbs

1 - Bromide 500 ml/16fl.oz

1 - Bromate 600 g/1.3 lbs






1 - Bromine Test Kit

1 - Sponge

1 - Measuring Cup


1 - Fragrance

QuestionsAnd AnswersAbout Your

BeachcomberHot Tub

It’s very important to us to give you the information you need to enjoy your hot tubexperience. Following are some of the most common questions that have come acrossour customer service desk over the last year, and we wanted to give them to you tohelp you understand how to avoid service calls.

SECTION 7

7 - 1 Questions and Answers about your Beachcomber Hot Tub

QUESTIONS AND ANSWERS FOR THEHOT TUB OWNER

How do we get our Beachcomber Hot Tubinto our backyard?

Your Beachcomber dealer will deliver yourhot tub to your yard. Prepare for yourdelivery - clear the way of toys, bikes,barbecues and wood piles. If you needmore information about your hot tub suchas weight and dimensions, check Section9, “Details Reference Chart”. YourBeachcomber Hot Tub is double wrappedfrom the factory to protect it from anydamage during shipping.

How soon can we use our hot tub afterwe fill it with water?

Your hot tub will probably need from 6-12hours to heat to temperature after you fillit with your garden hose. Once it’s hot,your initial startup dose of hot tubdisinfectant will need to be applied. Again,your Beachcomber dealer will be there towalk you through that process of startup.Never use your hot tub without the properlevels of disinfectant (sanitizer).

How long can we stay in?

Once you are enjoying your soak, you willfind that the average time is about twentyminutes. You can stay in longer by simplysitting out on the lip of the hot tub. It’sstrong enough to support you and friends!

How do we know if there is enough waterin our hot tub?

Fill your hot tub so that the water comeshalfway up the skimmer (see diagram).You can go higher than that, but never golower. A low water level can make yourskimmer gulp air, which can causeproblems in the motor and pump. Consultpage 9-1 for the correct gallons/liters foryour model of hot tub.

Correct water level. Your skimmeropening should be no less than halfwaysubmerged for optimum performance.

How do we connect the electricity?

This is not a job that you can do yourself,unless you are a licensed electrician. Youwill need an electrical line to run fromyour breaker box in your house to the hottub. Any qualified electrician can do thisjob for you. The electrician will choose thecorrect wire size and the breaker size foryour hot tub.

Questions and Answers about your Beachcomber Hot Tub 7 - 2

Do we use anything to treat the woodencabinet on our hot tub?

Beachcomber makes a very good productcalled Nu Wood. It’s applied in an easytwo step process, and will keep yourcabinet looking new for years to come. Werecommend that you apply Nu Woodwithin 6 months to a year of the first yearof ownership. If your hot tub is exposed tothe elements, such as on a lakefront, youwill need to apply Nu Wood every 3-6months.

Does the cover require anymaintenance?

Your Beachcomber Hot Tub Cover requires very little maintenance. CoverAllis a water based product that you canapply to the cover on a mild day. Itprotects the vinyl cover from the sun’sharmful UV rays. Use CoverAll everymonth to keep your cover clean and UV protected.

When do we drain our Beachcomber Hot Tub?

A good rule of thumb is to drain everythree months under average use. However,if you are enjoying your hot tub with morefriends than usual, you should take in awater sample each month to yourBeachcomber store to have your wateranalyzed.

How hot should we keep ourBeachcomber Hot Tub?

The temperature of your hot tub is more apersonal matter - however, the average

temperature should be 104 F / 40 C. Thiswill give you a very pleasurable soak. Ifyou have young children, you should turndown your hot tub heat about 5 degreesbefore entering the hot tub.

WARNING

Never leave your child unsupervised inyour hot tub.

What do we do when we go on holidaysin the winter time or summer time?

Like any other aspect of your house, it’salways a good idea to have a relative orfriend check on your house, and your hottub, every two or three days. Werecommend that you call your localBeachcomber dealer for proper winterizingprocedures. Each situation is different;your time away, weather conditions andother factors may need to be dealt with byyour local dealer. We cannot beresponsible for decisions you make thatmay damage your hot tub and void yourguarantee. Always leave the cover on yourtub to protect it from direct sunlight.

What if the power goes out? What do wedo with our hot tub?

Power almost always comes back on linein a few minutes, or hours. Your GFCIbreaker is designed to trip off when itsenses a surge or decrease in power. Ifyou have specific questions about powerto your hot tub, call your BeachcomberDealer.


How often do we clean our filters?

This can depend on usage. If you have lotsof friends that are enjoying the hot tubwith you, you will need to clean themmore often. Inspect your filters to checkfor leaves and other debris that mayimpair their ability to filter the water. Werecommend that you clean them once amonth with Filter Pure or Filter Cure. Youshould have two sets; rotating them sothat one is always ready and clean. A filtercleaning canister is a time saver and isalso available from your BeachcomberStore.

How do we replace our light?

SPECIAL NOTE:

This is best left to your BeachcomberDealer to do for you. If you want to do ityourself, bear in mind that you coulddamage your hot tub, and you may voidyour Guarantee.

Use Beachcomber’s light removaltool to remove the light lens.

Turn off all power at the main powersource to your hot tub. Drain the hot tub(see page 3-2 for directions). With thesupplied “light removal tool” unscrew thecenter of the light lens by turningcounterclockwise. Remove the old bulband install a new one. Replacement bulbsare available from your local Beachcomberdealer. To replace the lens, screw it inclockwise with the tool and hand tightenuntil it is snug. Do not overtighten, or youmay risk cracking the lens.

Our hot tub’s mechanical controls don’tseem to be working.

Your manual button switch is removeable.You can do that by rotating the outer ringclockwise 1/8 of a turn and popping it off.Inside the switch mechanism is a blackbellows called a “diaphragm” that may bedamaged or cracked. Simply take it outand get a new diaphragm from yourBeachcomber store.

Beachcomber’s mechanicalair buttons.

LIGHT


If your diaphragm is in good shape, theremay be another problem. There is a clearhose attached to this diaphragm that linkson to the back of the Management System(the black metal box on top of the motor).See that this clear tubing has not poppedoff the pneumatic switch. If it has, it mayhave become stretched; simply cut off ahalf inch of the hose and replace it backonto the switch nipple.

What is the best surface finish used inmaking a hot tub?

Cast acrylic. For a lasting hot tub finish,the material you use must have acolorfast, non-porous, stain resistant andhigh-gloss surface that resists chipping,cracking and denting. Equally important, ithas to be easy to clean. The Acuraluxfinish used by Beachcomber has out-performed any other material for the pastdecade.

Do I need a plumber to hook up my hot tub?

No, a Beachcomber hot tub is acompletely integrated unit. You fill andempty the hot tub with water from agarden hose. The water is cleaned andheated through its own internal systems.

What type of power do I need to run ahot tub?

120 or 240 Volt hookup depending on themodel. Your amp rating will vary with yourhot tub. Refer to your local dealer.

How do I know a hot tub is structurallystrong enough to last for a lifetime?

Like the foundation and framing of a well-built home, the structure of a hot tub isimpossible to see but vitally important.There are three parts to every Beach-comber Hot Tub’s structural strength.First, overall support; the best material isGlasloc 2000, a plastic binding of resinand glass applied in layers to theunderside of the hot tub shell. Second is apressure-treated base to distribute hottub weight evenly. Third, and equallyimportant, is the I-beam support systemwhich supports the shell like the trusses inthe roof of your home. Beachcomber usesthis three-step support, and we guaranteethe structural integrity of our hot tubs forlife.


What happens after I pay for my hot tub?How do I know I’ll receive after-saleservice?

Good question. Does the store have aservice centre? Is there more than onelocation? Is there a dealer network? Isthere a toll-free 800 number to contact themanufacturer? How long has the companysold the hot tub brand it carries? Where isthe hot tub made? And how long has themanufacturer been in business? These aregood questions to ask. At Beachcomber,we believe we have the answers - and allpositive.

What about the hot tub itself? Are thereenough jets?

It’s the kind of jet - and not the number -that’s more important. Demandinterchangeable massage inserts that canbe switched into different WaterportsTM aseasily as you change a lightbulb.

Do more motors and pumps make abetter hot tub?

No, look for a carefully engineered waterflow energy saving system that providesthe least horsepower with maximum jetaction. Why? Because it eliminates waterrestriction. Remember, don’t make thesame mistake as the auto industry in theseventies. The bigger motor is notnecessarily better.

Should I buy a hot tub with the powersource underneath?

With the power source inside the hot tub,one wall will be without maximuminsulation. It’s like insulating only threewalls of your home. It’s best to buy a fullyfoam-filled hot tub.

Does air space around the hot tub workas well as insulation?

No. If it worked, we could insulate ourhomes with just air space between thewalls. Likewise, the best way to keep thewarmth in your hot tub is to use foaminsulation.

TROUBLESHOOTING

You may run into situations from time totime that require some troubleshooting.These are some issues that may arise,along with their simple solutions that willhelp you avoid a service call. If you are indoubt about using any of these solutions,call your Beachcomber dealer.

Power system seems inoperative

• Check to see that the power at the main power supply panel is turned on.

• Check to see that the GFCI (GroundFault Circuit Interrupter) has not beentripped.

• Check for a blown fuse in the controlbox. Turn off all power beforereplacing fuses.


Fault indicated by control panel display

Refer to Section 5 for “Display messages”for Digital controls.

The pump does not start during startup

• There may not be enough water in thehot tub.

• Air may be in the lines, and needs tobe bled from the system.

Jets will not operate

• Check that the pump is properlystarted up (primed).

• Jet nozzles could be plugged ormissing. Remove massage insertsand clean. Ensure that all massageinserts are there and in place.Remove them and reinstall properly,hand tightening only.

• Check for blockages at the suctionfitting(s) in the footwell.

• Check for blockages in the Microfilterby removing the filter(s) andinspecting. Note: Digital ManagementSystem must be on standby.

• The water level may be too low.

• Ensure that the knife valves are fullyopen.

Hot tub does not heat to temperature

• The thermostat may be set too low.See Section 5 “Digital OperationInstructions”.

• Filters may need to be cleaned orreplaced. Remove them and inspect.

• Water level may be too low.

• See Section 3 for bleeding air out ofthe system.

• Pressure switch may not senseenough pressure.

• The heater element or thermostat maybe defective.

Hot tub heats, but not to temperature

• Ensure that the hot tub is coveredproperly by the heatshield.

• Extremely high wind or lowtemperatures may affect heatingability.

• Try closing the air controls toconserve heat.

• Ensure that the step or doors areproperly closed to protect equipment.

• Heater element may be coated withcalcium, impairing its ability to heatbecause of improper water balance.


Hot tub heats hotter than normal

• The pump may have been left on highspeed too long. Open the cover toallow heat to escape, as well asopening all air controls.

• Thermostat may be faulty.

Hot tub water is cloudy

• Check the filters to see that they areinstalled correctly, clean and free fromdebris.

• Tub may not be filtering long enoughfor bather load. Check your filtersettings.

• Try shocking the water. If there hasbeen a heavy bather load, you mayneed to shock several times over twoor three days.

• Ask your Beachcomber store aboutthe Holiday Tender. This systemallows sanitation to take place on acontinuous basis in your hot tub.

• Take a water sample to yourBeachcomber store for free computeranalysis.

WARNING

Do not permit electrical appliances suchas a light, radio, telephone or televisionwithin 10 feet (3 meters) of your hot tub.

Register YourBeachcomber

Hot TubAnd Keep ItWorry-Free

Beachcomber offers you a worry free Guarantee. A guarantee protects you - not like awarranty, which protects the manufacturer. We want you to have the most worry free,enjoyable experience with your hot tub, that you’ll tell your friends! And if you everydo have cause to refer to the guarantee, we want it to be the least of your worries.

SECTION 8

8 - 1 Register your Beachcomber Hot Tub and Keep it Worry-Free

CONGRATULATIONS ON YOUR PURCHASE OF A NEW BEACHCOMBER HOT TUB!

We want to take this opportunity to welcome you into the Beachcomber Family! You havejoined many thousands of Beachcomber owners around the world who have discoveredthe healing properties of hot water therapy. We are happy that you have opened up awhole new world of stress relief, entertainment, relaxation, family events and more, foryou and the people you love. It is our goal for you to find a new way of life in yourBeachcomber Hot Tub. Please fill in this information to keep for future reference aboutyour hot tub and its details.

OWNER’S RECORD

Date Purchased Date Installed

Beachcomber Dealer

Address

Telephone ( ) Fax ( )

Hot Tub Serial Number

Pak Serial Number

Color and Model

Protec Portable

Indoor OutsideInstallation Installation

Electrical Installer & Phone Number

Please complete Guarantee document within thirty (30) days of delivery and forward it toour manufacturing facility. This will allow us to register your Guarantee. Guarantee formsare available from your local store.

Beachcomber Hot Tubs13245 Comber WaySurrey, BC, Canada V3W 5V8Attn: Guarantee Division

Register your Beachcomber Hot Tub and Keep it Worry-Free 8 - 2

S I N C E 1 9 7 8

“PICK UP THIS 3 PART FORM AT YOURLOCAL BEACHCOMBER STORE”


Like all quality companies, we love to hear from our customers. Write us with advice,feedback, new ideas, referrals or requests for more information. We’re easy to talk to andwe recognize the value of what our customers have to say. Communicate to:

Keith Scott, FounderBeachcomber Hot Tubs, 13245 Comber Way, Surrey, BC Canada V3W 5V8

Information and Education for the Hot Tub Buyer:For those looking to buy a hot tub, you can learn more with Free Information andEducation about Beachcomber by calling this toll-free number: 1.800.998.3288.

North American Customer Care:If you ever have a question or concern, you can call this toll-free number 24 hours a dayto speak to a factory representative: 1.800.663.6557.

Beachcomber’s Website:Hot tubs may be an old idea, but designing, manufacturing and servicing them is still ayoung industry. Beachcomber is one of the oldest and most successful companies in thebusiness. You can visit our website, at www.beachcomberhottubs.com.

Contact us via Email:[email protected]

International Franchise Distributor Opportunities with Beachcomber:If you are interested in becoming an exclusive Beachcomber store, call 604.591.8611 tospeak to a dealer development person in your area.

Register your Beachcomber Hot Tub and Keep it Worry-Free 8 - 4

San Diego Beachcomber Worldwide Center:1204 Park Center Drive, Vista, California USA 92083

1.866.250.7878Fax line: 760.560.7882

Arnhem Beachcomber European Center:De Overmaat 39A, 6831 AE Arnhem, The Netherlands

31 (0) 26 327 4822Fax line: 31 (0) 26 323 7836

Vancouver Beachcomber Home Office:13245 Comber Way, Surrey, BC, Canada V3W 5V8

1.800.663.6557Fax line: 604.597.2853

Toronto Beachcomber Development Center:#1, 2725 Bristol Circle, Oakville, ON, Canada L6H 6X5

1.800.268.3966Fax line: 905.829.2848

We appreciate your referral. We believe that the best way to get new customers is to askour hot tub owners! If you know of a friend or relative that is looking for a hot tub, wewould appreciate it if you would let us know.

When they purchase a hot tub from Beachcomber, we’ll send you a free gift, just to saythanks! Please include your name and address as well so that we can send you a token ofour appreciation.

MY REFERRAL IS:

Name

Address

Postal Code

Phone (W) (H)

Interested in Beachcomber Model

Please send free education and information kit YES

NO

Please hand this form in to your local Beachcomber store on your next visit. Let us say“Thanks” in advance! We are committed to giving your friends and relatives the samelevel of service with a new Beachcomber Hot Tub.

Your Name

Your Address

Your Phone

Or, you can return to: Beachcomber Hot Tubs13245 Comber WaySurrey, BC, Canada V3W 5V8or fax to 604.597.2853


YourBeachcomber

Hot TubDetails

The basic details about your hot tub can be found in this section. But remember - it’sfor quick reference. If you need specific information about installation, operation,electrical supply and other technical questions, please contact your localBeachcomber Store. They will be happy to answer any questions you may have. Or,you can call Beachcomber’s North American Customer Care, at 1.800.663.6557.

SECTION 9

9 - 1 Your Beachcomber Hot Tub Details

Hot Tub Pump hp WaterportsTM Jets Capacity Dimensions Dry Weight Filled Weight720RI 2.5x3.5 22 25-69 350 gallons 80x88x38 in 675 lbs 3596 lbs

1325 litres 203x224x97 cm 307 kg 1632 kg750 3.5x4.5 38 43-121 398 gallons 89x89x38 in 800 lbs 4123 lbs



1507 litres 226x226x97 cm 341 kg 1848 kg720x 1.5x3.5 27 32-82 350 gallons 80x88x38 in 675 lbs 3596 lbs


1325 litres 203x224x97 cm 307 kg 1632 kg580 4.5 25 31-85 400 gallons 89x89x38 in 725 lbs 4065 lbs

1515 litres 226x226x97 cm 329 kg 1844 kg550x 3.5 19 23-67 360 gallons 80x88x38 in 650 lbs 3655 lbs

1363 litres 203x224x97 cm 295 kg 1658 kg550C 2.5 15 18-52 320 gallons 80x88x38 in 578 lbs 3578 lbs


1000 litres 179x218x97 cm 273 kg 1273 kg530L 2.5 15 18-54 250 gallons 70x86x30 in 500 lbs 2587 lbs





1363 litres 203x224x97 cm 295 kg 1658 kg320 1.0 5 6-36 220 gallons 78x30 in 425 lbs 2262 lbs

833 litres 198x76 cm 193 kg 1026 kg320x 1.5 9 11-48 240 gallons 78x38 in 510 lbs 2347 lbs

908 litres 198x97 cm 232 kg 1064 kg320m 1.0 6 6-36 220 gallons 78x30 in 425 lbs 2262 lbs

833 litres 198x76 cm 193 kg 1026 kg320xm 1.5 9 11-48 240 gallons 78x38 in 510 lbs 2347 lbs

908 litres 198x97 cm 232 kg 1064 kg150 1.5 13 17-61 360 gallons 79x87x38 in 650 lbs 3655 lbs

1363 litres 201x221x97 cm 295 kg 1658 kg

HOT TUB MODEL DETAILS REFERENCE CHART

Your Beachcomber Hot Tub Details 9 - 2

GLOSSARY OF TERMS

Access DoorThe door on a portable hot tub (also calleda P2000) that gives you access to the hottub equipment.

Air Bleed ValveThe small black valve used to bleed excessair from the system when primingpump(s). See Section 3.

Air ButtonThe function switch on a mechanical hottub that turns the pump on and off.

Air ControlThe function rotating knob that allows airto be injected into the jets for a morevigorous, therapeutic massage.

Air LockThis happens when air is trapped insidethe pak. See Section 3 for instructions onbleeding the air from the system.

BlowerA 1 HP pump that injects forced air intothe jets for more turbulence in the hot tub.See “Turbo”.

CabinetThe wood that surrounds the hot tub. Alsocalled a skirt. Beachcomber uses only thebest clear (free from any defects) WesternRed Cedar. See the “Beachcomber Book ofHot Tubs” for the story of Beachcomber’schoice for this superior wood, on page 18.This book is available free of charge fromyour Beachcomber store.

Control PanelThe digital panel that controls the hot tub’sfunctions. See Section 5.

CavitationThis happens when air is gulped into thesystem through the microfilter. This isusually due to water level that is too low.See Section 3 for correct water levels.

CoverAllPurity’s product to enhance and protectthe vinyl on a heatshield from the sun’srays. Comes in a convenient spray bottle.

Digital 1000Beachcomber’s entry level digital controlpanel. Basic functions of jets, light andtemperature control. See Section 5.

Digital 2000Beachcomber’s digital control panel.Includes jets and light switches, as well astemperature, which is adjustable. SeeSection 5.

Digital 3000Beachcomber’s “Energy Saver” backlit 700Series digital control panel. Includes allhot tub functions and is fullyprogrammable for heating and filteringcycles. This panel is packed withconvenient features such as a reversibledisplay. See Section 5.


DrainThe fitting set into the footwell that drainswater from a hot tub. Beachcomber’sunique design allows you to drain watersafely and easily, the same way as thebath tub in your home. See Section 3.

Energy SaverThe electronic system that allowsoperation of hot tub functions from thecontrol panel. See “Digital 1, 2 or 3000”.See Section 5.

EnviroSkirtTM

UV protected, synthetic cabinet with realwood simulated look. Impact resistant andwill not rot.

EverlightTM

Beachcomber’s hot tub light with newMicroStarTM technology. Designed to neverburn out.

FilterThe cartridge that filters minute particles,hair, leaves and other debris from your hottub. Protects the equipment from foreignsubstances.

Filter Cure/PurePurity’s product that is used to cleanfilters. Alternating the use of these twoproducts restores your filters for reuse.

FootwellThe bottom of a hot tub where you placeyour feet. Beachcomber is known for itslarger footwells for more comfortableseating.

GFCI BreakerThe electronic switch installed in thepower box of your house to give power tothe hot tub. This is a user non-serviceablepart.

Heater HousingThe pipe that houses the heating element.It is lined with stainless steel to protectthe element and to allow the piping towithstand the heat.

HeatshieldThe hot tub cover that sits on top of yourhot tub. It conserves heat and protects thefinish of your hot tub. Beachcomber alsooffers replacement heatshield covers atyour local store, for any model of hot tub.

Hose BibA valve fitting that is turned on or off toallow the flow of water. There are twohose bibs found on most BeachcomberHot Tubs.

HyperthermiaA physical condition that occurs due tooverexposure to heat that can be fatal.

JetsThe fittings on your hot tub that direct theflow of water for massaging action.Beachcomber offers a variety of jets foryour needs.

Kick PlateThe bottom frame of the hot tub thatsupports the hot tub weight. EveryBeachcomber Hot Tub is designed foreven weight distribution.


Knife ValveThe valve that allows the flow of water tothe hot tub. See Section 1 for diagrams oftheir locations and operation.

Lift ‘n StoreBeachcomber’s exclusive cover remover.An easy way to remove your hot tub cover.Made from aluminum piping.

LightThe moodlight in a hot tub that providessafer entry and exit. Activated by theswitch on the control panel.

Light LensColored plastic lens covers that fit over thehot tub light to create mood andambience.

Locking TabsFittings on the heat shield that allow it tobe locked down. Prevents unsupervisedentry by children and keeps pets and otheranimals out. See Section 2.

Massage InsertsThe threaded body or fixture that housesone or more jets. Threads into WaterPortTM

opening allowing interchangeability ofmassage inserts. See Section 3.

MicrofilterBeachcomber's filtration system design inthe corner of each Beachcomber Hot Tub.Removal for cleaning is safe and easy. SeeSection 2.

MotorThe 240 Volt electric motor. The motor isattached to a pump (also called a wetend). Beachcomber also offers a 120 Voltmotor (see the chart in this section).

Nu-WoodProduct to restore, protect and enhancethe cedar cabinet on a hot tub for years tocome. Easily applied in a two-part processwith the brush supplied in the kit. SeeSection 4.

O-RingPlastic ring on the back of the hot tub jetsto complete the seal. Once jets are seatedand installed, the O-ring helps keep the jetin place and prevents water from backingup into the air lines.

OzoneA water purification supplement methodusing Ozone gas. Gas is made by anOzone generator unit that can reduce yoursanitizer needs by up to 25%. Available asan option on most Beachcomber Hot Tubs.

PakThe hot tub electronic piece of equipmentincluding the motor, pump and immediatepiping. This is a non-serviceablecomponent. See your Beachcomber dealerfor servicing.

pHStands for “potential for hydrogen”. Thisis the term used to describe the acid (lowpH) or alkalinity (high pH) condition of thewater. The ideal pH for bathing in a hot tubis 7.5.


ProtecBeachcomber’s proprietary design optionof exterior equipment to enhanceserviceability, reduce noise, improveinsulation and provide a step as standardequipment.

PortableBeachcomber style of construction withthe equipment underneath the cabinetbehind an access door. Also called aP2000. This model is fully portable likeany other home appliance.

PumpThe black fitting on the end of a hot tubmotor. Houses the bearings and impellerthat actually push the water through thepipes. Also called a “wet end”.

PurityBeachcomber’s exclusive supplier of watertreatment and hot tub products such asHot Tub Revitalizing Kits, Fragrances andPool and Spa Chemicals. A full line ofPurity products is available at your localBeachcomber store.

Return SideThe side of the hot tub that sees the waterreturn to the hot tub.

ShockThe act of putting in extra sanitizer, usuallyweekly, to clean hot tub water.

StepBeachcomber’s cedar step used for entryand exit. Offers better safety and ease ofentry and exit and will easier support an

adult. The step is offered as standardequipment with a Protec hot tub, andoptional on a Portable hot tub.

SuctionThe side of the hot tub that sees waterreturn to the motor and pump. A suctionfitting is in the footwell of the hot tub toallow water to be sucked back into theequipment and heater. See Section 2.

Tote KitsPurity’s kits made especially for startup fornew hot tub owners.

Tub CleanPurity’s product to help clean the hot tubacrylic surface. Also used to clean a scumline in a hot tub that is full of water.

TurboAnother name for a blower, an extra pump(optional) to add more air action to a hottub. See also”Blower”.

UnionThe threaded fitting that is attached to hottub piping to secure the pipe to anotherfitting. See Section 1 for diagrams on theProtec model and how to secure theseunions.

WaterportsTM

The jet openings within the hot tub shell.

Wire SizeYour electrician is authorized to properlyinstall your hot tub to ensure that yourwarranty is valid.


ADDITIONAL SOURCES OF INFORMATIONON YOUR HOT TUB

1. The Beachcomber Book of Hot Tubs.64 pages on the Beachcomberphilosophy, the benefits of hot watertherapy through the ages and themodern convenience of owning aBeachcomber.

2. The Art of Building a Hot Tub Video.Keith Scott shares his expertise onbuilding hot tubs, and buying a hottub for your home. You’ll see a step-by-step process that buildsindustry-leading quality into everysize hot tub Beachcomber makes.

3. The Beachcomber Buyer’s Guide.All the facts and figures on thecomplete Beachcomber line of hottubs to help you choose the modelthat’s just right for you.

4. “One Who Knows Water”.A newsmagazine featuringBeachcomber founder and industrypioneer Keith Scott, who answersfrequently asked questions abouthot tubs.

5. Beachcomber’s website is availableto you 24 hours a day. It is:www.beachcomberhottubs.com.

6. If you ever have a question orconcern, you can callBeachcomber’s North AmericanCustomer Care Number, at 1.800.663.6557.

7. If you need more specific, statistical information about yourBeachcomber Hot Tub, pleaseconsult your local Beachcomberstore. While we endeavor to keepthis manual current, we reserve the right to make changes withoutnotice as new information,technology and manufacturingmethods become available. If youneed help with your hot tub, itsoperation and/or maintenance, orits installation and delivery, pleaseconsult your local Beachcomberstore.

dear beachcomber hot tub owner - the cover guy™ - hot ......dear beachcomber hot tub owner: thank...

Documents