decisionspace® well engineering release...
TRANSCRIPT
5000.1.10.0 July 2012
Draft
DecisionSpace® Well Engineering
5000.1.10.0Software Release Notes
Contents
What Is In This Release? ........................................................................................ 2
System Requirements ............................................................................................ 7
Third-Party Software ............................................................................................... 10
Installation ............................................................................................................... 25
Licensing ................................................................................................................. 34
Functionality to Expect in This Release ............................................................... 35
Fixed Issues ............................................................................................................ 46
Known Issues .......................................................................................................... 47
International Trade Compliance ............................................................................ 49
Contacting Landmark for Support ........................................................................ 51
5000.1.10.0 Page 2 of 55 July 2012
What Is In This Release? July 2012
Draft
What Is In This Release?DecisionSpace® Well Engineering software is the latest significant step in the over twenty year evolution of the WELLPLAN™ software. Building upon this industry leading suite, DecisionSpace Well Engineering extends and simplifies the science through advancements in ease of use and data visualization. DecisionSpace® Well Engineering is integrated with the other EDT™ applications enabling you to install it on the same computer, and share data with other EDT applications. You can be confident that DecisionSpace® Well Engineering software uses the same theoretical science and industry-leading methodology you rely on with the WELLPLAN™ software.
Significantly Improved Usability
For novice and expert users, the completely redesigned user interface provides a simple approach to input data as well as powerful visualization capabilities to quickly interpret results. The software interface is divided into four major sections. Use the tabs on the left to input well related data, and the tabs on the right to input analysis parameters or view a schematic. Select desired analysis outputs using the ribbons at the top, and view output results in the middle section. This interface design provides you easy navigation through the software with minimal clicks. Due to the improved usability, existing WELLPLAN™ users will require minimal training, while new users can quickly learn to use the DecisionSpace® Well Engineering software.
5000.1.10.0 Page 3 of 55 July 2012
Draft
Go To “What’s In This Release?”
What Is In This Release? DecisionSpace® Well Engineering Software Release Notes
Expanded Sensitivity Analysis
DecisionSpace® Well Engineering provides a powerful method of performing sensitivity analysis for many different variables. Rather than perform multiple manual iterations, you can define a range of values for the numeric variables you want to use in the sensitivity analysis. The analysis will be performed using the defined ranges on all outputs in the Output Area (center section of the software interface) that use the range data. Detailed graphical representations allow you to quickly review the sensitivity results.
5000.1.10.0 Page 4 of 55 July 2012
Draft
Go To “What’s In This Release?”
What Is In This Release? DecisionSpace® Well Engineering Software Release Notes
Output Drive Inputs
Input only the data needed for the analysis you need. DecisionSpace® Well Engineering provides clear step-by-step guidance on what data is required and leads you through the data input panels in just a few clicks. Dynamic navigation and notifications guide you through entering the required data, and performing the next analysis step. Outputs are calculated and displayed when all the required data is input. This process enables engineers to utilize the software quickly and easily while supporting more accurate results.“Output driving input” methodology identifies the required data and provides hypertext links to the appropriate data input panel. Simply click the hypertext links, input the required data, and the software does the rest.The interactive wellbore schematic provides visual feedback throughout the analysis. This simplified process allows you to make better decisions by quickly and accurately performing the analysis you need.
5000.1.10.0 Page 5 of 55 July 2012
Draft
Go To “What’s In This Release?”
What Is In This Release? DecisionSpace® Well Engineering Software Release Notes
Interactive Wellbore Representations
Results are displayed graphically as part of interactive wellbore representations making interpretation of results easy to visualize and understand.
5000.1.10.0 Page 6 of 55 July 2012
Draft
Go To “What’s In This Release?”
What Is In This Release? DecisionSpace® Well Engineering Software Release Notes
WYSIWYG Reports
The “output driving inputs” design used in the DecisionSpace® Well Engineering software carries over into the reports. In addition to a well schematic and table of contents, the report will contain only the information associated with the outputs you have selected. Information associated with the output includes general well data, and analysis parameters. The reports can be output in a variety of commonly used formats such as pdf, doc, xls, and more.
Service Oriented Architecture
DecisionSpace® Well Engineering calculations are web services based. This provides the capability to replace the Landmark® provided calculation engines with third party, or customer specific calculation engines.
5000.1.10.0 Page 7 of 55 July 2012
Draft
Go To “What’s In This Release?”
System Requirements DecisionSpace® Well Engineering Software Release Notes
System RequirementsDecisionSpace® Well Engineering software will run on Engineer’s Desktop™ versions 5000.1.10.0 or later 5000.1.10.x releases.
Refer to Engineer’s Desktop™ Software Version 5000.1.10 Release Notes for information about system requirements.
Supported Operating System(s)
• Windows 7, SP1, 64-bit(note that Windows Vista and Windows XP are not supported)
• Citrix XenApp5 or XenApp6
Windows
Desktop and laptop basic requirements are:
• 2 GHz or higher processor • 4GB RAM or higher • VGA Color Monitor • Graphics Card: minimum 1024x768 resolution. DirectX 9.0 compatible or
better, with DirectDraw Acceleration Enabled • 106-key Windows-ready integrated keyboard • MS-Compatible mouse or pointing device • TCP/IP based network connection 100 Mbps • 1 GB disk space
Software
• EDT 5000.1.10.0 or higher must be installed• .NET framework v. 4.0 (downloaded and installed with DS Well Engineering
installer)
Related Products
• EDT 5000.1.10.0 or higher must be installed• Access to an EDM database instance is required
5000.1.10.0 Page 8 of 55 July 2012
Draft
Go To “What’s In This Release?”
System Requirements DecisionSpace® Well Engineering Software Release Notes
Citrix
DS Well Engineering has been tested with Citrix thin-client environments. The following two Citrix platforms are supported.
Primary test environment, running Citrix XenApp 6 against Oracle 11.2.0.2:
Server 1 (Database server, SAM server)
Operating System: •Windows 2008 R2 Server Enterprise Edition, SP 1 – 64 Bit
Services: • Oracle 11g – 64 Bit Server (11.2.0.2 with patch 7 – 12429531)
• EDM database
• (SAM) Simultaneous Access Monitor (Note that the SAM server should not be on the same server with Citrix and the published applications)
Server 2 (Citrix and Applications)
Operating System: • Windows 2008 R2 Server Enterprise Edition, SP 1 – 64 Bit
Services: • Citrix XenApp 6 with recommended Citrix Hotfixes and Windows Hotfixes as described in: Recommended Hotfixes for XenApp 6.0 and Later on Windows Server 2008 R2 document at http://support.citrix.com/article/CTX129229
• EDT 5000.1.10.0• Oracle 11g – 32 Bit Client (11.2.0.2 with patch 7 – 12429530)
Citrix Client: • Version 11.00
5000.1.10.0 Page 9 of 55 July 2012
Draft
Go To “What’s In This Release?”
System Requirements DecisionSpace® Well Engineering Software Release Notes
Secondary test environment, running Citrix XenApp 5 against Oracle 10.2.0.4
Server 1 (Database server, SAM server)
Operating System: • Windows 2008 R1 Server Enterprise Edition, SP 2 – 64 Bit
Services: • Oracle 10g – 64Bit (10.2.0.4)
• EDM database
• (SAM) Simultaneous Access Monitor (Note that the SAM server should not be on the same server with Citrix and the published applications)
Server 2 (Citrix and Applications)
Operating System: • Windows 2008 R1 Server Enterprise Edition, SP 2 – 64 Bit
Services: • Citrix XenApp 5 with recommended Citrix Hotfixes and Windows Hotfixes (refer to the Citrix support page for details: http://support.citrix.com)
• EDT 5000.1.10.0• Oracle 10g – 32 Bit Client (10.2.0.4)
Citrix Client: • Version 11.00
5000.1.10.0 Page 10 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
Third-Party Software
Landmark uses various third-party applications in the development of its software.
Landmark acknowledges that certain third party code has been bundled with, or embedded in, Landmark’s software. The licensors of this third party code, and the terms and conditions of their respective licenses, may be found at the following location:
[Installdir]\Documentation\Third_Party.pdf
The following table describes the third party applications that are installed by the Engineer’s Desktop™ Software Version 5000.1.10.0 Release, or the DecisionSpace® Well Engineering 5000.1.10.0 Release.
Installed Product/Package Version for all supported Operating Systems
Apache/XML Xerces 1.4.x
AvalonDock 1.3.3571.0
Blue Marble Geographic Calculator 6.2
Commons BeanUtils 1.4.1
Commons Collections 2.0
Commons Logging 1.0.2
ComponentOne LLC Chart™ 7.0
Crystal Project, © 2008 The Yellow Icon. All rights reserved. N/A
Crystal Reports™ (note that one Crystal Reports™ Developer license per site is required if you want to customize reports)
11.5 SP3
DEX 2003.14.3.70
DynamicDataDisplay 0.3
Geobase® (Digital Elevation Data, and Satellite Imagery) N/A
Hewlett-Packard Development Company, L.P., Compaq Visual Fortran 6.1a
iText 2.1.6
Macrovision™ Corporation FLEXnet Publisher™ 11.4
Macrovision™ InstallShield Admin Studio™ 6.0
Microsoft® Data Access Components (MDAC) 2.8 SP1
Microsoft® J# FrameWork 1.1
5000.1.10.0 Page 11 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
Additional Copyrights, Licenses, and Attributions:
Copyrights
Copyright © 2007-2010, Adolfo Marinucci. All rights reserved.Copyright © 2006-2012, Microsoft Corporation. All rights reserved.Copyright © 2004-2011 Apache Software Foundation.Copyright © 2002-2007 Charlie Poole Copyright © 2002-2004 James W. Newkirk, Michael C. Two, Alexei A. VorontsovCopyright © 2000-2002 Philip A. Craig
Microsoft® Prism 4.1
Microsoft® Ribbon Control 4.0.0.11019
Microsoft® SQL Server 2005 Express Edition (replaces MSDE) SP2
Microsoft® .NET Framework 2.0 2.0
Microsoft® WPF Toolkit 3.5.40128.1
Microsoft® Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update (filename: vcredist_x86.exe)
2005 SP1 (v. 8.0)
NHibernate (which includes the following:)• ANTLR3 3.1.0.39271• Iesi.Collections• LinFu.DynamicProxy 1.0.4.18998• log4net 1.2.10.0
2.1.2.4000
Rogue Wave 6.0.4
Rogue Wave™ Software, Inc., Stingray Studio – Objective Grid PRO 8
Rogue Wave™ Software, Inc., Stingray Studio – Objective Grid Standard 8
Rogue Wave™ Software, Inc., Stingray Studio – Objective Toolkit Standard 8
SCGrid.com, SCGrid Active X grid Control 4.5.0.3
Silicon Graphics®, Inc. OpenGL® 1.2
Sun Microsystems, Inc., JOGL (Java Bindings for OpenGL). Copyright © 2003-2007 Sun Microsystems, Inc. All rights reserved.
1.1.1a
TCL Library (Tclib) 8.2.3
Transitionals 1.2
Installed Product/Package Version for all supported Operating Systems
5000.1.10.0 Page 12 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
Copyright 1991-2009 by Michael R SweetCopyright 1999 by Alessandro Falappa. Copyright © CodeProject, 1999-2012 Copyright 2008 by Sanjay1982Portions Written by Nguyen Tan Hung <[email protected]>Copyright 2003 by Eugene PustovoytCopyright 2005 Simon MiethCopyright (c) Mark J. Kilgard, 1994, 1995, 1996, 1998.Copyright (C) 1998,'99 by Joerg Koenig All rights reserved Copyright (c) 1998 Timex Corporation
Licenses and Attributions
Copyright (c) 2007-2010, Adolfo Marinucci All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Adolfo Marinucci nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
5000.1.10.0 Page 13 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
The LinFu Library, (c) 2007 Philip Laureano, is subject to the terms of the following license:
GNU LESSER GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
This version of the GNU Lesser General Public License incorporatesthe terms and conditions of version 3 of the GNU General PublicLicense, supplemented by the additional permissions listed below.
0. Additional Definitions.
As used herein, "this License" refers to version 3 of the GNU Lesser General Public License, and the "GNU GPL" refers to version 3 of the GNU General Public License.
"The Library" refers to a covered work governed by this License, other than an Application or a Combined Work as defined below.
An "Application" is any work that makes use of an interface provided by the Library, but which is not otherwise based on the Library. Defining a subclass of a class defined by the Library is deemed a mode of using an interface provided by the Library.
A "Combined Work" is a work produced by combining or linking an Application with the Library. The particular version of the Library with which the Combined Work was made is also called the "Linked Version".
The "Minimal Corresponding Source" for a Combined Work means the
5000.1.10.0 Page 14 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
Corresponding Source for the Combined Work, excluding any source code for portions of the Combined Work that, considered in isolation, are based on the Application, and not on the Linked Version.
The "Corresponding Application Code" for a Combined Work means the object code and/or source code for the Application, including any data and utility programs needed for reproducing the Combined Work from the Application, but excluding the System Libraries of the Combined Work.
1. Exception to Section 3 of the GNU GPL.
You may convey a covered work under sections 3 and 4 of this License without being bound by section 3 of the GNU GPL.
2. Conveying Modified Versions.
If you modify a copy of the Library, and, in your modifications, a facility refers to a function or data to be supplied by an Application that uses the facility (other than as an argument passed when the facility is invoked), then you may convey a copy of the modified version:
a) under this License, provided that you make a good faith effort to ensure that, in the event an Application does not supply the function or data, the facility still operates, and performs whatever part of its purpose remains meaningful, or
b) under the GNU GPL, with none of the additional permissions of this License applicable to that copy.
3. Object Code Incorporating Material from Library Header Files.
The object code form of an Application may incorporate material from
5000.1.10.0 Page 15 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
a header file that is part of the Library. You may convey such object code under terms of your choice, provided that, if the incorporated material is not limited to numerical parameters, data structure layouts and accessors, or small macros, inline functions and templates (ten or fewer lines in length), you do both of the following:
a) Give prominent notice with each copy of the object code that the Library is used in it and that the Library and its use are covered by this License.
b) Accompany the object code with a copy of the GNU GPL and this license document.
4. Combined Works.
You may convey a Combined Work under terms of your choice that, taken together, effectively do not restrict modification of the portions of the Library contained in the Combined Work and reverse engineering for debugging such modifications, if you also do each of the following:
a) Give prominent notice with each copy of the Combined Work that the Library is used in it and that the Library and its use are covered by this License.
b) Accompany the Combined Work with a copy of the GNU GPL and this license document.
c) For a Combined Work that displays copyright notices during execution, include the copyright notice for the Library among these notices, as well as a reference directing the user to the copies of the GNU GPL and this license document.
5000.1.10.0 Page 16 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
d) Do one of the following:
0) Convey the Minimal Corresponding Source under the terms of this License, and the Corresponding Application Code in a form suitable for, and under terms that permit, the user to recombine or relink the Application with a modified version of the Linked Version to produce a modified Combined Work, in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source.
1) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (a) uses at run time a copy of the Library already present on the user's computer system, and (b) will operate properly with a modified version of the Library that is interface-compatible with the Linked Version.
e) Provide Installation Information, but only if you would otherwise be required to provide such information under section 6 of the GNU GPL, and only to the extent that such information is necessary to install and execute a modified version of the Combined Work produced by recombining or relinking the Application with a modified version of the Linked Version. (If you use option 4d0, the Installation Information must accompany the Minimal Corresponding Source and Corresponding Application Code. If you use option 4d1, you must provide the Installation Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source.)
5. Combined Libraries.
You may place library facilities that are a work based on the Library side by side in a single library together with other library
5000.1.10.0 Page 17 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
facilities that are not Applications and are not covered by this License, and convey such a combined library under terms of your choice, if you do both of the following:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities, conveyed under the terms of this License.
b) Give prominent notice with the combined library that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.
6. Revised Versions of the GNU Lesser General Public License.
The Free Software Foundation may publish revised and/or new versions of the GNU Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library as you received it specifies that a certain numbered version of the GNU Lesser General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that published version or of any later version published by the Free Software Foundation. If the Library as you received it does not specify a version number of the GNU Lesser General Public License, you may choose any version of the GNU Lesser General Public License ever published by the Free Software Foundation.
If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General Public License shall apply, that proxy's public statement of acceptance of any version is permanent authorization for you to choose that version for the Library.
5000.1.10.0 Page 18 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
Apache LicenseVersion 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
5000.1.10.0 Page 19 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
5000.1.10.0 Page 20 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
5000.1.10.0 Page 21 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of
5000.1.10.0 Page 22 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
5000.1.10.0 Page 23 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
5000.1.10.0 Page 24 of 55 July 2012
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
5000.1.10.0 Page 25 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
InstallationNote that 32-bit operating systems are no longer supported.
Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release must be installed before installing DecisionSpace® Well Engineering software.
This release of DecisionSpace® Well Engineering software is an upgrade to the Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release. You must have EDT 5000.1.10.x installed on your machine before installing the DecisionSpace® Well Engineering software.
Contents of the DecisionSpace® Well Engineering Software Download
DecisionSpace® Well Engineering software download contains:
• DSWellEng_5000.1.10.0_ReleaseWin.zip file containing the DecisionSpace® Well Engineering 5000.1.10.0 Release. The update will add new files and update existing Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release files.
• Release Notes for DecisionSpace® Well Engineering software. This document.
Installation Instructions
There are six major steps in this process:
1. Install EDT 5000.1.0
2. Install EDT 5000.1.10.0, or later EDT 5000.1.10.x release.
3. Install .net Framework v4.0
4. Install DecisionSpace® Well Engineering 5000.1.10.0 Release software.
5. Update the EDM™ database.
6. Run the DecisionSpace® Well Engineering 5000.1.10.0 Release software.
Important Notes:
• Refer to Engineer’s Data Model (EDM) Installation Guide and Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release Notes for
5000.1.10.0 Page 26 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
information about installing 5000.1.0 and 5000.1.10.0 versions of the Engineer’s Desktop.
• DecisionSpace® Well Engineering software must be installed on EDT 5000.1.10.0, or later 5000.1.10.x releases.
Step 1. Install EDT 5000.1.0
Refer to Engineer’s Data Model (EDM) Installation Guide for information about installing the Engineer’s Desktop. As directed in the installation guide, you must install LAM, Third Party products, EDM, and the Drilling and Completions software.
Step 2. Install EDT 5000.1.10.0, or later EDT 5000.1.10.x Release
Refer to Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release Notes for information about installing the Engineer’s Desktop.
Step 3. Install .NET Framework v4
.NET Framework v4 can be downloaded from the Microsoft® website.
Step 4. Install DecisionSpace® Well Engineering 5000.1.10.0 Release Software
a. Unzip the DSWellEng_5000.1.10.0_ReleaseWin.zip file to a temporary folder. Two files are included in the zip file: Setup.msi, and setup.exe.
b. Run setup.exe.
5000.1.10.0 Page 27 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
c. Click Run.
d. Click Next.
5000.1.10.0 Page 28 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
e. Navigate to the folder where you want to install the software, and indicate who should have access to the software once it is installed. Click Next.
5000.1.10.0 Page 29 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
f. Click Next.
g. Click Yes.
5000.1.10.0 Page 30 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
h. A progress bar displays. Click Close when installation is complete.
Step 5. Update the EDM™ Database
a. Run Start > All Programs > Landmark Engineer’s Desktop 5000.1 > Tools > DS Well Engineering Updates.
• To update an Oracle database, select Apply DS Well Eng ORA Update.
• To update an SQL database, select Apply DS Well Eng SQL Update.
Note: The images in the following steps pertain to the SQL update. However, the Oracle update is performed using the same steps.
5000.1.10.0 Page 31 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
b. Click Yes.
c. Click Unzip.
d. Click OK.
5000.1.10.0 Page 32 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
e. Click Run Automated.
f. Click OK.
g. Enter credentials, and select database you want to update. Click OK.
h. On the next screen that displays, click Yes to update the database.
5000.1.10.0 Page 33 of 55 July 2012
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
i. Click OK.
Step 6. Run the DecisionSpace® Well Engineering 5000.1.10.0 Release software.
Use Start > All Programs > Landmark Engineer’s Desktop 5000.1 > DS Well Engineering to run the DecisionSpace® Well Engineering software.
5000.1.10.0 Page 34 of 55 July 2012
Draft
Go To “What’s In This Release?”
Licensing DecisionSpace® Well Engineering Software Release Notes
LicensingLandmark's Application Manager (LAM) is the license system used to control access to Landmark applications. LAM is based on Macrovision's FLEXnet Publisher. LAM version 5000 is required for release 5000.1.0 and higher. You do not need to re-license for this release; your 5000.1.0 licenses will work. Refer to the EDT™ Software Version 5000.1.0 Summary Level Release Notes for licensing details.
The DecisionSpace® Well Engineering software requires the following valid licenses to run:
• EDM
• Drilling Mechanic Basic (Torque and Drag) License and/or Drilling Fluids Basic (Hydraulics) license
5000.1.10.0 Page 35 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Functionality to Expect in This ReleaseThe DecisionSpace® Well Engineering software release contains most of the WELLPLAN™ Torque Drag, Hydraulics, and general functionality. This section indicates the WELLPLAN functionality implemented in the DecisionSpace® Well Engineering 5000.1.10.0 Release.
Torque Drag Analysis
Torque Drag Analysis Modes
WELLPLAN™ Analysis Mode In Release?
Normal Analysis Yes
Top Down Analysis Yes1
Drag Chart Analysis Yes
Calibration Friction Analysis Yes2
Riserless/InnerString Analysis No
1In the DecisionSpace® Well Engineering 5000.1.10.0 Software Release, the WELLPLAN™ Top Down Analysis and Normal Analysis modes are blended. Use the User Defined Operation to perform a top down analysis using the DecisionSpace® Well Engineering 5000.1.10.0 Software Release.
2An alternative approach to friction calibration is implemented in the DecisionSpace® Well Engineering 5000.1.10.0 Software Release using the Friction Calibration plot.
Torque Drag Functionality
Functionality In Release?
Sheave Friction Yes
Fluid Columns Yes
Stiff String Yes
Flotation (Casing/Liner) No
Standoff Devices/Centralizers Yes
Sensitivity Plots Yes
Torque Drag Analysis with Flowrate Yes
Bending Stress Magnification Yes
Viscous Drag Yes
Unique Friction Factors for Separate Operations Yes
Average Operational Friction Factors N/A1
Actual Loads Yes
Additional Surface or Annular Pressure Yes
Point of Interest for Run Plots No
Buckling Limit Factor No
Contact Normalization Length Yes
Real Time Data Import No
Reports Yes
5000.1.10.0 Page 36 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1With the implementation of the Friction Calibration plot in the Deci-sionSpace® Well Engineering 5000.1.10.0 Software Release, average operational friction factors are no longer necessary.
5000.1.10.0 Page 37 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Torque Drag Plots and Tables
Functionality In Release?
Effective Tension Yes
True Tension Yes
Torque Graph Yes
Sensitivity Plot Friction Factors Yes1
Side Force Graph Yes
Fatigue Graph Yes
Stress Graph: Tripping In Yes
Stress Graph: Rotating On Bottom Yes
Stress Graph: Tripping Out Yes
Stress Graph: Rotating Off Bottom Yes
Stress Graph: Slide Drilling Yes
Position Graph: Tripping In Yes2
Position Graph: Rotating On Bottom Yes2
Position Graph: Tripping Out Yes2
Position Graph: Rotating Off Bottom Yes2
Position Graph: Slide Drilling Yes2
Position Graph: Backreaming Yes2
Summary Loads Yes
Load Data: Tripping In Yes
Load Data: Rotating On Bottom Yes
Load Data: Slide Drilling Yes
Load Data: Backreaming Yes
Stress Data: Tripping In Yes
Stress Data: Rotating On Bottom Yes
Stress Data: Tripping Out Yes
Stress Data: Rotating Off Bottom Yes
Stress Data: Slide Drilling Yes
Stress Data: Backreaming Yes
Detail Report Yes3
5000.1.10.0 Page 38 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1The DecisionSpace® Well Engineering software provides a powerful method of performing sensitivity analysis. Sensitivity analysis is not limited to friction factor calibration, and can be applied to many parameters. Refer to the online help for more information.
2in the DecisionSpace® Well Engineering software release, the information is displayed in the Workstring Position plot. This plot displays the position of the workstring in the wellbore for both soft and stiff string analysis. Fatigue, Von Mises stress, or Side Force acting on the workstring can be displayed as well. Refer to the online help for more information.
3DecisionSpace® Well Engineering software reports contain information related to selected outputs.
4In the DecisionSpace® Well Engineering 5000.1.10.0 Software Release, all friction calibration is performed using the Friction Calibration plot.
Summary Report Yes3
Tension Point/Hook Load Chart Yes
Torque Point/Surface Chart Yes
Minimum WOB Chart Yes
Sensitivity Plot Tension/Hook Load Chart Yes1
Friction Calibration/Hook Load Chart Yes
Manual Friction Calibration/Hook Load Chart Yes4
Top Down Tension Graph Yes
Top Down Torque Graph Yes
Top Down Side Force Graph Yes
Top Down Fatigue Graph Yes
Top Down Stress Graph Yes
Top Down Position Graph Yes
Top Down Load Data No
Top Down Stress Data Yes
Top Down Analysis Detail Report Yes
Torque Drag Plots and Tables
5000.1.10.0 Page 39 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Hydraulics Analysis
Hydraulics Analysis Modes
WELLPLAN™ Analysis Mode In Release?
Hole Cleaning Operational Analysis Yes1
Hole Cleaning Parametric Analysis No
Pressure: Pump Rate Range Analysis Yes2
Pressure: Pump Rate Fixed Analysis Yes2
Swab/Surge (Steady-State) Analysis No
Optimization Planning No
1Separate Bed Height vs MD, Cuttings Volume vs Depth, and Minimum Flowrate vs MD plots are available in DecisionSpace® Well Engineering software.
2A significant amount of the WELLPLAN™ functionality has been implemented in the DecisionSpace® Well Engineering software.
Hydraulics Analysis Functionality
Functionality In Release?
Pipe Roughness Yes
Annular Roughness Yes
Mud Temperature Effects Yes
Returns to Sea Floor Yes
Local Bit Nozzle Analysis Yes1
Include Back Pressure Yes
Annular Velocity Plot No
Gel Strength Yes
Pressure Loss Pie Chart Yes2
Power Loss Pie Chart No
Reports Yes3
5000.1.10.0 Page 40 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1The local bit nozzle functionality is no longer required because the DecisionSpace® Well Engineering software interface provides easy access to all input data.
2The DecisionSpace® Well Engineering software Hydraulics Summary displays the pressure loss in the string, bit, and annulus but does not display the pressure loss as loss per component.
3DecisionSpace® Well Engineering software reports will contain information related to selected outputs.
5000.1.10.0 Page 41 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Hydraulics Analysis Plots, Tables, and Reports
Functionality In Release?
Operational Plot Yes
Minimum Flow Rate vs ROP Yes
Hole Cleaning Operational Report Yes
Total Volume % Plot Yes
Suspended Volume % Plot Yes
Minimum Flowrate Plot Yes
Bed Height Plot Yes
Pressure Loss Plot Yes
Annular Velocity Plot No
Annular Pump Rate Plot Yes
Annulus Information Table No
Pressure Loss Report Yes3
Circulating Pressure vs Depth Plot Yes
ECD vs Depth Plot Yes
Circulating Pressure/ECD vs Run Depth Chart Yes
Pressure to Break Gel Plot Yes
Pie Chart: Pressure Losses Drill String Yes2
Pie Chart: Pressure Losses Annulus Yes2
Pie Chart: Power Losses Drill String No
Pie Chart: Power Losses Annulus No
Pressure/ECD Report Yes3
Swab Open End Plot No
Swab Closed End Plot No
Surge Open End Plot No
Surge Closed End Plot No
Swab Surge Pressure and ECD Report No
Swab Surge Tripping Schedule Report No
Velocity @ Bit Plot Yes
Power Per Area Plot Yes
Impact Force Plot Yes
Power Plot No
5000.1.10.0 Page 42 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1Separate Bed Height vs MD, Cuttings Volume vs Depth, and Minimum Flowrate vs MD plots are available in WELLPLAN Next Generation. Suspended cuttings volume plot not available.
2The DecisionSpace® Well Engineering software Summary displays the pressure loss in the string, bit, and annulus but does not break the pressure loss into loss per component.
3DecisionSpace® Well Engineering software reports will contain information related to selected outputs.
Pressure Loss Plot Yes
Power vs Impact Force Plot No
Hydraulics Analysis Plots, Tables, and Reports
5000.1.10.0 Page 43 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
General Functionality
Functionality Category Functionality In Release?
Datums/Elevations Set System Datum No
Create Default Site Elevation No
Set Wellhead Location (slot, offset, map, geographic)
No
Set Well Datum Yes
Working with Cases Create Cases from Casing Design Yes
Create Designs or Cases from OpenWells
No
Create Instant Case Yes
Work on Multiple Cases Simultaneously
Yes1
Well Explorer Functionality Well Explorer Tree Yes2
Copy String Editor Yes3
Copy Hole Section No
Copy Fluids No
Copy Wellpath Yes4
Audit/Change History No
Attachments No
Delete Design, Well, Wellbore, Site, Project, or Company
No
Find in Tree (method to search well explorer hierarchy)
No
User Assistance Online Help Yes
Input Wizard N/A5
Status Messages Yes6
Units Custom Unit System Yes
API, SI, Mixed API, and API US Survey Feet Unit System
Yes
Set Active Unit System Yes
Utilities Convert Units No
5000.1.10.0 Page 44 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
MD/TVD Conversion No
Picklist Editor No
Data Dictionary No
Volume Calculation No
Catalog Editor Yes
Wall Plot Composer No
Symbol Manager/Mapping No
Properties Edit/Create Tubular Properties Yes
Edit/Specify Company Properties No
Edit/Specify Project Properties No
Edit/Specify Site Properties No
Edit/Specify Well Properties No
Edit/Specify Wellbore Properties No
Edit/Specify Design Properties No
Edit/Specify Case Properties No
Sidetrack Well and Set Sidetrack Properties
No
Set Design Phase (prototype, plan, actual)
No
Data Locking Password Protect Company Properties
No
Lock Project No
Set Security Tight Groups No
Lock Site No
Lock Wellbore No
Workspaces Workspace Yes7
Default Workspace No
Data Import and Export Import/Export Yes8
Import Centralizer Placement from OptiCem Module
No
Libraries String Library Yes
Fluid Library No
Functionality Category Functionality In Release?
5000.1.10.0 Page 45 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1To simultaneously work on multiple cases when using the DecisionSpace® Well Engineering software, open the software multiple times and work with each case in a separate instance of the software. This will not require multiple licenses of the software.
2The DecisionSpace® Well Engineering software has some of the Well Explorer Tree functionality, although the implementation is different.
3Use the DecisionSpace® Well Engineering software Case Manager to copy a string from one case to another.
4In DecisionSpace® Well Engineering software, wellpath data can be copied between cases (using right-click menu, or CTRL C/CTRL V). However, it is not possible to drag/drop data between cases.
5The intuitive, output driven DecisionSpace® Well Engineering software design does not require an input wizard.
6WELLPLAN™ Status Messages have been significantly improved and replaced by intuitive messages strategically located throughout DecisionSpace® Well Engineering software.
7In DecisionSpace® Well Engineering software, workspaces are called Layouts.
8In DecisionSpace® Well Engineering software, it is possible to import cases and strings only.
Plots Vertical Section Yes
Plan View Yes
Inclination Yes
Azimuth Yes
Dogleg Severity Yes
Build Yes
Walk Yes
Absolute Tortuosity Yes
Relative Tortuosity Yes
Wellpath Table Yes
Geothermal Gradient Yes
Build Plane Curvature No
Walk Plane Curvature No
Schematic Schematic Yes
Functionality Category Functionality In Release?
5000.1.10.0 Page 46 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Fixed Issues
Descriptions of Fixed Issues for the DecisionSpace® Well Engineering software are provided below.
Defect No. Description
1744 Small data discrepancy when switching from Bingham Plastic to Herschel Bulkley.
1799 Calculated values should show up even when no plots are open.
1824 Well list doesn't show a newly created well if you switch to another well under the same site
1856 Negative Air Gap reading in DecisionSpace® Well Engineering software
1906 DecisionSpace® Well Engineering software compatibility with other EDT applications
1933 Data from the Count column of the Bit Nozzle table disappears after inserting a row and undoing
2071 String editor grid columns cannot be resized
2112 Weird Behavior using the HB model, and change from Fann to Rheology (Pressure Loss Plot)
2182 Incorrect Unreadable message on the Hydraulic Summary
2183 Empty temporary message Hydraulic Summary
2204 Newtonian rheology parameter is incorrect (compared to classic) after switching from Fann data
2223 Geothermal Gradient missing validation
2259 Multiple casings with the same START depth don't show an error. - Need a validation
2273 Crash: NHibernate. Save the transient instance before flushing
2284 MIN FLOW v ROP: Changes to STRING result in DISCREPANCY between Classic WELLPLAN and DecisionSpace® Well Engineering software
2286 Layouts: Unable to access to the select box when clicking on the LAYOUT button
5000.1.10.0 Page 47 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Known Issues
Descriptions of Known Issues for the DecisionSpace® Well Engineering software are provided below.
Defect No. Description
1740 Cannot see text caret in some positions in text fields when zoom is one step below 100%
1861 Undo/redo is not visible to the user for hidden fields
1960 Friction factor error consistency (for the 2 radio button states)
1969 Decimal positions on ECD plot
1973 Wrong behavior of the curve in the ECD vs Depth plot
2024 Resizing column widths in spreadsheets causes erratic behavior
2129 Floating plots aren't included in saved layouts
2050 Freezing an unselected curve (when no original lines are selected) changes the scale of the plot
2118 Inconsistent and missing hyperlinks
2127 Fatigue plot: Checking or unchecking “Slide Drilling” shouldn’t trigger calculations
2175 Blank cells have a copy function enabled with right-click menu
2246 Memory leak when changing cases with plots open
2282 Circulation Pressure: The first calculation (String) differs from the WELLPLAN™ software.
2502 Maximum Power/Area at TFA limit line in Bit Power/Area plot corresponds to the highest value in the range
2549 First row of Fluid Column grids get marked as required after entering data in undoing
2580 Geothermal Gradient can’t calculate if there is no open hole section
2585 When switching between rheology and Fann mode, rheology data is changing
2604 Disable fluid sensitivity if more than one row of Rheology Test data is entered
2620 Hole Section friction factors: Toggling on/off using FF from hole or per operations has no effect on sensitivity
2697 Exception when using Snipping tool to take screenshots
2710 Exception (Fann Data): “Specified element is already the logical child of another element. Disconnect it first”
5000.1.10.0 Page 48 of 55 July 2012
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
2747 Unchecked lines show on the legend after pasting “Copy to Clipboard” items
2751 Fatigue plot shows blank when no operation is selected (No hyperlink or message appears)
2752 Blank floating tab
2789 Intermittent exception: DynamicDataDisplay
2801 Missing validation that affects all Hydraulic calculations when HB is selected on Rheology data
2802 Inconsistent message when ID is greater than OD
2805 Description field of a created catalog is displayed incorrectly in String Editor
2807 New case not included in “Recently Saved Cases” list in Welcome dialog.
2810 Generating reports throws inappropriate error message when no plots are open
2821 Exception when generating the report for the second time (close the PDF alter the first time)
2824 Datum descriptions in Datum list should change when unit system changes
2873 When a Case created with DecisionSpace® Well Engineering is opened using WELLPLAN™, the mud density (Fluid Editor) must be entered again. Be aware that it will appear as if the mud density is already input in the Fluid Editor, however you must change the mud density to a new value, then change it back to the desired value, and click OK to close the Fluid Editor.
2874 The option to enable Bending Stress Magnification Force (BSMF) is not available for the stress plots. To enable the BSMF option, drag the Fatigue plot to the Output Area and check the “Use Bending Stress Magnification” box on the Analysis Settings tab. The BSMF functionality will be applied to all relevant outputs in the Output Area.
2893 When a Case created with DecisionSpace® Well Engineering is opened using WELLPLAN™, the well depth (Wellpath Editor) must be entered again. The well depth field on the Wellpath Editor will be blank. Enter the desired value, and tab out of the field.
Defect No. Description
5000.1.10.0 Page 49 of 55 July 2012
Draft
Go To “What’s In This Release?”
International Trade Compliance DecisionSpace® Well Engineering Software Release Notes
International Trade ComplianceThis application is manufactured or designed using U.S. origin technology and is therefore subject to the export control laws of the United States. Any use or further disposition of such items is subject to U.S. law. Exports from the United States and any re-export thereafter may require a formal export license authorization from the government. If there are doubts about the requirements of the applicable law, it is recommended that the buyer obtain qualified legal advice. These items cannot be used in the design, production, use, or storage of chemical, biological, or nuclear weapons, or missiles of any kind.
The ECCN's provided in Release Notes represent Landmark Graphics' opinion of the correct classification for the product today (based on the original software and/or original hardware). Classifications are subject to change. If you have any questions or need assistance please contact us at [email protected]
Under the U.S. Export Administration Regulations (EAR), the U.S. Government assigns your organization or client, as exporter/importer of record, responsibility for determining the correct authorization for the item at the time of export/import. Restrictions may apply to shipments based on the products, the customer, or the country of destination, and an export license may be required by the Department of Commerce prior to shipment. The U.S. Bureau of Industry and Security provides a web site to assist you with determining the need for a license and with information regarding where to obtain help.
The URL is: http://www.bis.doc.gov
Definitions
CCATS (Commodity Classification Automated Tracking System) - the tracking number assigned by the U.S. Bureau of Industry and Security (BIS) to products formally reviewed and classified by the government. The CCATS provides information concerning export/re-export authorizations, available exceptions, and conditions.
ECCN - Export Control Classification Number - The ECCN is an alpha-numeric code, e.g., 3A001, that describes a particular item or type of item, and shows the controls placed on that item. The CCL (Commerce Control List) is divided into ten broad categories, and each category is further subdivided into five product groups. The CCL is available on the EAR Website.
5000.1.10.0 Page 50 of 55 July 2012
Draft
Go To “What’s In This Release?”
International Trade Compliance DecisionSpace® Well Engineering Software Release Notes
The ECCN number, License Type, and the CCATS Numbers for this product are included in the table below. Also included is the date the table was last updated.
Product/Component/R5000 ECCN Number
License CCATS Number
Last Date Updated
Engineer’s Data Model (EDM) 5D002 ENC G060075 3/29/2010
Engineer’s Data Model Software Development Kit (EDM SDK)
5D002 ENC G060075 3/29/2010
5000.1.10.0 Page 51 of 55 July 2012
Draft
Go To “What’s In This Release?”
Contacting Landmark for Support DecisionSpace® Well Engineering Software Release Notes
Contacting Landmark for Support
Landmark software operates Technical Assistance Centers (TACs) in Australia, the United Kingdom, and the United States. Additional support is also provided through regional support offices around the world.
Regional Offices
Support Via Web Portal Support information is always available on the Landmark Customer Support internet page. You can also submit a support request directly to Landmark Customer Support though the Landmark Customer Support Portal:
http://css.lgc.com/InfoCenter/index?page=home
To request support in the Landmark Customer Support Portal:
1. In the PIN and Password text boxes in the Please Sign In area, enter your registered personal identification number and password.
2. Click the Sign In button.
3. In the Case & Defect Information area, click the Create A New Case link.
4. In the Create Case area, fill in the necessary information. Provide details about your technical concern, including any error messages, the workflow steps where the problem occurred, and attachments of screen shots that display the problem. To help understand the concern, you can also attach other files too, such as example data files.
5. Click the Submit button. A support analyst in the nearest Technical Assistance Center will respond to your request.
5000.1.10.0 Page 52 of 55 July 2012
Draft
Go To “What’s In This Release?”
Technical Assistance Centers DecisionSpace® Well Engineering Software Release Notes
Technical Assistance Centers
Regional OfficesFor contact information for regional offices, see the Contact Support page located at:
http://css.lgc.com/InfoCenter/index?page=contact§ion=contact
If problems cannot be resolved at the regional level, an escalation team is called to resolve your incidents quickly.
Asia, Pacific8:00 am - 5:00 pm Local Time
Monday-Friday, excluding holidays
61-8-9481-4488 (Perth, Australia)Toll Free 1-800-448-488
Fax: 61-8-9481-1580
Email:
Europe, Africa, Middle East9:00 am - 5:30 pm Local Time
Monday - Friday, excluding holidays
44-1372-868686 (Leatherhead, UK)Fax: 44-1224-723260 (Aberdeen, UK)
Fax: 44-1372-868601 (Leatherhead, UK)
Email:
Latin America(Spanish, Portuguese, English)
7:00 am - 5:00 pm Local Time
713-839-3405 (Houston, TX, USA)Fax: 713-839-3646
Email:
North America7:30 am - 5:30 pm Central Standard Time
Monday - Friday, excluding holidays
713-839-2200 (Houston, TX, USA)Toll Free 1-877-435-7542
(1-877-HELP-LGC)
Fax: 713-839-2168
Email:
5000.1.10.0 Page 53 of 55 July 2012
Draft
Go To “What’s In This Release?”
Technical Assistance Centers DecisionSpace® Well Engineering Software Release Notes
© 2012 Halliburton
All Rights Reserved
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Halliburton. Unauthorized reproduction or distribution of this documentation, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law.
Halliburton may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.
Halliburton | Landmark Software & Services2107 CityWest Blvd, Building 2, Houston, Texas 77042-3051, USA
P.O. Box 42806, Houston, Texas 77242, USAPhone:713-839-2000, FAX: 713-839-2015
Internet: www.halliburton.com/landmark
Trademarks33D Drill View, 3D Drill View KM, 3D Surveillance, 3DFS, 3DView, Active Field Surveillance, Active Reservoir Surveillance, Adaptive Mesh Refining, ADC, Advanced Data Transfer, Analysis Model Layering, ARIES, ARIES DecisionSuite, Asset Data Mining, Asset Decision Solutions, Asset Development Center, Asset Development Centre, Asset Journal, Asset Performance, AssetConnect, AssetConnect Enterprise, AssetConnect Enterprise Express, AssetConnect Expert, AssetDirector, AssetJournal, AssetLink, AssetLink Advisor, AssetLink Director, AssetLink Observer, AssetObserver, AssetObserver Advisor, AssetOptimizer, AssetPlanner, AssetPredictor, AssetSolver, AssetSolver Online, AssetView, AssetView 2D, AssetView 3D, BLITZPAK, CartoSnap, CasingLife, CasingSeat, CDS Connect, Channel Trim, COMPASS, Contract Generation, Corporate Data Archiver, Corporate Data Store, Data Analyzer, DataManager, DataStar, DBPlot, Decision Management System, DecisionSpace, DecisionSpace 3D Drill View, DecisionSpace 3D Drill View KM, DecisionSpace AssetLink, DecisionSpace AssetPlanner, DecisionSpace AssetSolver, DecisionSpace Atomic Meshing, DecisionSpace Desktop, DecisionSpace Nexus, DecisionSpace Reservoir, DecisionSuite, Deeper Knowledge. Broader Understanding., Depth Team, Depth Team Explorer, Depth Team Express, Depth Team Extreme, Depth Team Interpreter, DepthTeam, DepthTeam Explorer, DepthTeam Express, DepthTeam Extreme, DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS, Discovery, Discovery 3D, Discovery Asset, Discovery Framebuilder, Discovery PowerStation, DMS, Drillability Suite, Drilling Desktop, DrillModel, Drill-to-the-Earth-Model, Drillworks, Drillworks ConnectML, Drillworks Predict, DSS, Dynamic Frameworks to Fill, Dynamic Reservoir Management, Dynamic Surveillance System, EDM, EDM AutoSync, EDT, eLandmark, Engineer’s Data Model, Engineer’s Desktop, Engineer’s Link, ESP, Event Similarity Prediction, ezFault, ezModel, ezSurface, ezTracker, ezTracker2D, FastTrack, Field Scenario Planner, FieldPlan, For Production, FrameBuilder, Frameworks to Fill, FZAP!, GeoAtlas, GeoDataLoad, GeoGraphix, GeoGraphix Exploration System, Geometric Kernel, GeoProbe, GeoProbe GF DataServer, GeoSmith, GES, GES97, GESXplorer, GMAplus, GMI Imager, Grid3D, GRIDGENR, H. Clean, Handheld Field Operator, HHFO, High Science Simplified, Horizon Generation, I2 Enterprise, iDIMS, Infrastructure, Iso Core, IsoMap, iWellFile, KnowledgeSource, Landmark (as a service), Landmark (as software), Landmark Decision Center, Landmark Logo and Design, Landscape, Large Model, Lattix, LeaseMap, LithoTect, LogEdit, LogM, LogPrep, MagicDesk, Make Great Decisions, MathPack, MDS Connect, MicroTopology, MIMIC, MIMIC+, Model Builder, NETool, Nexus (as a service), Nexus (as software), Nexus View, Object MP, OpenBooks, OpenJournal, OpenSGM, OpenVision, OpenWells, OpenWire, OpenWire Client, OpenWire Server, OpenWorks, OpenWorks Development Kit, OpenWorks Production, OpenWorks Well File,
5000.1.10.0 Page 54 of 55 July 2012
Draft
Go To “What’s In This Release?”
Technical Assistance Centers DecisionSpace® Well Engineering Software Release Notes
PAL, Parallel-VIP, Parametric Modeling, Permedia, PetroBank, PetroBank Explorer, PetroBank Master Data Store, PetroWorks, PetroWorks Asset, PetroWorks Pro, PetroWorks ULTRA, PlotView, Point Gridding Plus, Pointing Dispatcher, PostStack, PostStack ESP, PostStack Family, Power Interpretation, PowerCalculator, PowerExplorer, PowerExplorer Connect, PowerGrid, PowerHub, PowerModel, PowerView, PrecisionTarget, Presgraf, PressWorks, PRIZM, Production, Production Asset Manager, PROFILE, Project Administrator, ProMAGIC, ProMAGIC Connect, ProMAGIC Server, ProMAX, ProMAX 2D, ProMax 3D, ProMAX 3DPSDM, ProMAX 4D, ProMAX Family, ProMAX MVA, ProMAX VSP, pSTAx, Query Builder, Quick, Quick+, QUICKDIF, Quickwell, Quickwell+, Quiklog, QUIKRAY, QUIKSHOT, QUIKVSP, RAVE, RAYMAP, RAYMAP+, Real Freedom, Real Time Asset Management Center, Real Time Decision Center, Real Time Operations Center, Real Time Production Surveillance, Real Time Surveillance, Real-time View, Reference Data Manager, Reservoir, Reservoir Framework Builder, RESev, ResMap, RTOC, SCAN, SeisCube, SeisMap, SeisMapX, SeisModel, SeisSpace, SeisVision, SeisWell, SeisWorks, SeisWorks 2D, SeisWorks 3D, SeisWorks PowerCalculator, SeisWorks PowerJournal, SeisWorks PowerSection, SeisWorks PowerView, SeisXchange, Semblance Computation and Analysis, Sierra Family, SigmaView, SimConnect, SimConvert, SimDataStudio, SimResults, SimResults+, SimResults+3D, SIVA+, SLAM, SmartFlow, smartSECTION, smartSTRAT, Spatializer, SpecDecomp, StrataMap, StrataModel, StratAmp, StrataSim, StratWorks, StratWorks 3D, StreamCalc, StressCheck, STRUCT, Structure Cube, Surf & Connect, SurfNet, SynTool, System Start for Servers, SystemStart, SystemStart for Clients, SystemStart for Servers, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, T-Grid, The Engineer’s DeskTop, Total Drilling Performance, TOW/cs, TOW/cs Revenue Interface, TracPlanner, TracPlanner Xpress, Trend Form Gridding, Trimmed Grid, Turbo Synthetics, Unconventional Essentials, VESPA, VESPA+, VIP, VIP-COMP, VIP-CORE, VIPDataStudio, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-Local Grid Refinement, VIP-THERM, vSpace, vSpace Blueprint, vSpace Onsite, WavX, Web Editor, Well H. Clean, Well Seismic Fusion, Wellbase, Wellbore Planner, Wellbore Planner Connect, WELLCAT, WellCost, WellDirect, WELLPLAN, WellSolver, WellXchange, WOW, Xsection, You’re in Control. Experience the difference., ZAP!, ZetaAnalytics, Z-MAP, and Z-MAP Plus are trademarks, registered trademarks, or service marks of Halliburton.
All other trademarks, service marks and product or service names are the trademarks or names of their respective owners.
NoteThe information contained in this document is subject to change without notice and should not be construed as a commitment by Halliburton. Halliburton assumes no responsibility for any error that may appear in this manual. Some states or jurisdictions do not allow disclaimer of expressed or implied warranties in certain transactions; therefore, this statement may not apply to you.
Third Party Licenses and AttributionsHalliburton acknowledges that certain third party code has been bundled with, or embedded in, its software. The licensors of this third party code, and the terms and conditions of their respective licenses, may be found at the following location:
[InstallationDirectory]\Documentation\Third_Party.pdf
DisclaimerThe programs and documentation may provide links to external web sites and access to content, products, and services from third parties. Halliburton is not responsible for the availability of, or any content provided on, third party web sites. You bear all risks
5000.1.10.0 Page 55 of 55 July 2012
Draft
Go To “What’s In This Release?”
Technical Assistance Centers DecisionSpace® Well Engineering Software Release Notes
associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Halliburton is not responsible for: (a) the quality of third party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Halliburton is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.