dell ultrasharp up2718q user’s guide · • removable pedestal and video electronics standards...
TRANSCRIPT
Model: UP2718QRegulatory model: UP2718Qt
Dell UltraSharp UP2718QUser’s Guide
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Copyright © 2017 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.
2017 – 05 Rev. A00
Contents
About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Identifying Parts and Controls. . . . . . . . . . . . . . . . . . . . . . . . . 7
Monitor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Plug-and-Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LCD Monitor Quality and Pixel Policy . . . . . . . . . . . . . . . . . . . 20
Setting Up the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Tilt, Swivel, and Vertical Extension . . . . . . . . . . . . . . . 24
Adjusting the Rotation Display Settings of Your System . . . . . . . . 25
Connecting Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Organizing Your Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Removing the Monitor Stand . . . . . . . . . . . . . . . . . . . . . . . . 29
Wall Mounting (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Operating the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Turning on the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using the Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . 31
Using the On-Screen Display (OSD) Menu. . . . . . . . . . . . . . . . . 34
Contents | 3
4 | Contents
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Product Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Universal Serial Bus (USB) Specific Problems . . . . . . . . . . . . . . . 55
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
FCC Notices (U.S. only) and Other Regulatory Information . . . . . . 56
Contacting Dell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting Up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Maintenance Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
About Your Monitor | 5
About Your Monitor
Package ContentsYour monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing.
NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
Monitor
Stand riser
Stand base
Power cable (varies by country)
USB 3.0 upstream cable (enables the USB ports on the monitor)
DP cable (DP to mDP)
6 | About Your Monitor
HDMI cable
Drivers and Documentation
Contents:• Device drivers• Quick Setup Guide • User's Guide• Dell Display Manager Software
UltraSharp UP2718Q MonitorDell ™
P/N FV07F Rev. A00P/N 790.A1U39.0001
May 2017Made in China
© 2017 Dell Inc. A
ll rig
hts re
serv
ed.
PremierColorUP2718Q Color Calibration Factory Report
Every Dell UP2718Q is shipped incorporating pre-tunedsRGB and AdobeRGB with average DeltaE<2. Colorand Luminance Uniformity is adjusted across the screento meet DeltaE<2 and 97-102% respectively. This helpsprevent significant color inconsistency or inaccuracy. Inaddition, a tighter grey-scale tracking helps enable ultra-smooth color gradation.Be assured of Accurate, Precise and ConsistentOnscreen Color with every Dell Ultrasharp UP2718Q.
Serial No.
Tester
TestEquipment
CN0NGD827444555I066L
1
CA-310/CA-210CA-2000SChroma 2326/2235/2233
sRGB Avg. Delta E < 2 Adobe RGB Avg. Delta E < 2
Grey-Scale Tracking Gamma
Brightness Uniformity (x,y, Y) Ref to Center Color Uniformity Delta E (L*a*b*) Ref to Center
1 2 3 4 5100% 100% 100% 100% 100%
6 7 8 9 10100% 100% 100% 100% 100%
11 12 13 14 15100% 100% 100% 100% 100%
16 17 18 19 20100% 100% 100% 100% 100%
21 22 23 24 25100% 100% 100% 100% 100%
1 2 3 4 50.05 0.10 0.06 0.05 0.14
6 7 8 9 100.10 0.05 0.02 0.05 0.09
11 12 13 14 150.08 0.04 0.00 0.02 0.07
16 17 18 19 200.12 0.10 0.22 0.16 0.10
21 22 23 24 250.07 0.13 0.02 0.03 0.13
• Color Calibration Software• Software Development Kit driver
•Drivers and documentation media
•Quick Setup Guide
•Safety, Environmental, and Regulatory Information
•Factory Calibration Report
Product FeaturesThe Dell UltraSharp UP2718Q monitor has an active matrix, thinfilm transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include:
• 68.47 cm (27-inch) active area display (Measured diagonally) 3840 x 2160 (16:9 aspect ratio) resolution, plus full-screen support for lower resolutions.
• Tilt, swivel, pivot and vertical extension adjustment capabilities.
• Removable pedestal and Video Electronics Standards Association (VESA™) 100 mm mounting holes for flexible mounting solutions.
• Extensive digital connectivity with DP, mDP, HDMI, and USB 3.0 helps future-proof your monitor.
• Supports major color space standards for Adobe RGB, sRGB, REC2020,REC709 and DCI-P3.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
• Software and documentation media includes an information file (INF), Image color Matching File (ICM), Dell Display Manager software application and product documentation.
• Security lock slot.
• Supports Asset Management Capability.
• Arsenic-Free glass and Mercury-Free for Panel only.
• Energy Gauge shows the energy level being consumed by the monitor in real time.
• 0.3 W standby power when in the sleep mode.
• Compliance to ULTRA HD PREMIUM™ certification mark. (ULTRA HD PREMIUM™ logo is a trademark of UHD Alliance, Inc.)
• Optimize eye comfort with a flicker-free screen.
NOTE: The possible long-term effects of blue light emission from the monitor may
cause damage to the eyes, including eye fatigue or digital eye strain. ComfortView
feature is designed to reduce the amount of blue light emitted from the monitor to
optimize eye comfort.
About Your Monitor | 7
Identifying Parts and Controls
Front view
1 2
Label Description1 Function buttons (For more information, see Operating the Monitor)
2 Power on/off button (with LED indicator)
8 | About Your Monitor
Back View
76
1
2
3
54 DELL UP2718Q
Flat Panel Monitor / Model No. / UP2718QtInput Rating / 100-240V ~ 50/60Hz XXAMade in China / Manufactured date /
Energy
Conse rvati on Certif i
cat ion
UP2718Q
Удельная мощность рабочего режима - X,XXX Вт/смПотребляемая мощность изделием в режиме ожидания - X,XX ВтПотребляемая мощность изделием в выключенном режиме - X,XX Вт
2
Flat Panel Monitor / Monitor Plano Panel / Moniteur à écran plat / Model No. / Modelo / Numéro de modèle / : UP2718QtInput Rating / Entrada / Daya Tegangan / Tension d’entrée: 100-240V ~ 50/60Hz X.XA
100-240 , 1.6 50/60Consumo de energía: XX.X WhConsumo de energía en modo de espera: X.XX Wh
Made in China / Fabricado en China / Fabriqués en Chine/ Сделано в Китае /
CAN ICES-3 (B)/NMB-3(B)
XUXXXXXX-XXXXXMSIP-REM-WT1-UP2718Qt
Wistron Corporation Wistron InfoComm (Zhongshan) Corporation
Wistron InfoComm (Zhongshan) CorporationA/S :080-854-0066
Apparatet må tilkoples jordet stikkontakt.Apparaten skall anslutas till jordat uttag.Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
XXXXXИ005-16
X X X X X X - X X
Raheen Business ParkLimerick Irelandwww.dell.com
R43004 RoHS
ID XXXXXXXXXX
ID XXXXXXXXXX
Flicker Free
www.tuv.comID 1419033926
Low Blue LightContent
www.tuv.comID 1419033928
Label Description Use
1 VESA mounting holes (100 mm x 100 mm-behind attached VESA cover)
Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm).
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Release stand from monitor.
4 Security lock slot Secures monitor with security cable lock (sold separately).
5 Barcode, serial number, and Service Tag label
Refer to this label if you need to contact Dell for technical support.
6 Dell soundbar mounting slots Attaches the optional Dell soundbar.
NOTE: Please remove the plastic strip covering the mounting slots before affixing the Dell Soundbar. Dell soundbar is sold separately.
7 Cable management slot Use to organize cables by placing them through the slot.
About Your Monitor | 9
Side View
Bottom View
1 2 3 4 56 7 8
9
Label Description Use
1 AC power connector To connect the monitor power cable.
2 HDMI 1 connectorConnect your computer with HDMI cable.
3 HDMI 2 connector
4 DP connector (in) Connect your computer with DP cable.
5 mDP connector (in) Connect your computer with DP to mDP cable.
6 Audio line-out port Connect speakers to playback audio coming through HDMI or DP audio channels.Only supports 2-channel audio.
NOTE: The audio line-out port does not support headphones.
WARNING: Excessive sound pressure fromearphones or headphones can cause hearingdamage or loss.
USB downstream port
Port with battery icon supports BC 1.2.
10 | About Your Monitor
7 USB upstream ports Connect the USB cable that comes with your monitor to the computer. Once this cable is connected, you can use the USB downstream connectors on the monitor.
8 USB downstream ports Connect your USB device. You can only use this connector after you have connected the USB cable to the computer and USB upstream connector on the monitor. Port with battery icon supports BC 1.2.
9 Stand lock Lock the stand to the monitor using a M3 x 6 mm screw (screw not included).
Monitor Specifications
Screen type Active matrix - TFT LCD
Panel type In-plane switching Technology
Aspect ratio 16:9
Viewable image dimensions
Diagonal 68.47 cm (27 inches)
Active Area
Horizontal 596.74 mm (23.49 inches)
Vertical 335.66 mm (13.21 inches)
Area 200301.7 mm2 (310.47 inches2)
Pixel pitch 0.1554 mm x 0.1554 mm
Pixel per inch (PPI) 163
Viewing angle
Horizontal 178° (typical)
Vertical 178° (typical)
Brightness 400 cd/m² (typical) 1000 cd/m² (peak)
Contrast ratio 1000 to 1 (typical)20,000 to 1 (peak)
Display screen coating Anti-glare treatment of the front polarizer (3H) hard coating
Backlight White LED, Direct type system
Response Time (Gray to Gray)
6 ms (FAST mode)8 ms (NORMAL mode)
Color depth 1.07 Billion colors
Color gamut* 100% Adobe RGB100% sRGB97.7% DCI-P376.9% REC2020
Calibration accuracy Delta E < 2 (average)
About Your Monitor | 11
Connectivity •1 x DP 1.4 (HDCP 1.4/2.2)
•1 x mDP 1.4 (HDCP 1.4/2.2)
•2 x HDMI 2.0a (HDCP 1.4/2.2)
•2 x USB 3.0 downstream port
•2 x USB 3.0 with BC1.2 charging capability at 2A (max)
•2 x USB 3.0 upstream port
•1 x Analog audio line out (3.5mm jack)
Border width (edge of monitor to active area)
13.79 mm (Top/Left/Right)17.59 mm (Bottom)
Adjustability
Height adjustable stand 145 mm
Tilt -5° to 21°
Swivel -45° to 45°
Pivot 0° to 90°
Cable management Yes
Dell Display Manager (DDM) Compatibility
Easy Arrange and other key features
Security Security lock slot (cable lock sold separately) Anti-theft stand lock slot (to panel)
NOTE *: at panel native only, under Custom Mode preset.
Resolution Specifications
Horizontal scan range 30 kHz to 140 kHz (DP/HDMI)
Vertical scan range 24 Hz to 75 Hz (DP/HDMI)
Maximum preset resolution 3840 x 2160 at 60 Hz
Video display capabilities (DP & HDMI playback)
480p, 576p, 720p, 1080i, 1080p, UHD
12 | About Your Monitor
Preset Display Modes
Display ModeHorizontal Frequency (kHz)
Vertical Frequency (Hz)
Pixel Clock (MHz)
Sync Polarity (Horizontal/Vertical)
720 x 400 31.5 70.0 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.0 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1600 x 1200 75.0 60.0 162.0 +/+
VESA, 1920 x 1080 67.5 60.0 148.5 +/+
VESA, 2560 x 1440-R 88.787 59.95 241.5 +/-
VESA, 3840 x 2160 65.68 30.0 262.75 +/+
VESA, 3840 x 2160 133.313 60.0 533.25 +/+
VESA, 3840 x 2160 135.0 60.0 594.0 +/+
Electrical Specifications
Video input signals •Digital video signal for each differential line. Per differential line at 100 ohm impedance.
•DP/HDMI signal input support
Input voltage/ frequency/current
100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.8 A (maximum)
Inrush current 120 V: 30 A (Max.)
240 V: 60 A (Max.)
About Your Monitor | 13
Physical Characteristics
Connector type •DP connector
•mDP connector
•HDMI connector (x 2 ports)
•Audio line-out
•USB 3.0 connector
(Port with battery icon supports BC 1.2)
Signal cable type (in-box) DP to mDP, 1.8 M cableHDMI 1.8 M cableUSB 3.0, 1.8 M cable
Dimensions (with stand)
Height (extended) 547.1 mm (21.54 inches)
Height (compressed) 402.6 mm (15.85 inches)
Width 626.4 mm (24.66 inches)
Depth 200.3 mm (7.89 inches)
Dimensions (without stand)
Height 369.1 mm (14.53 inches)
Width 626.4 mm (24.66 inches)
Depth 64.4 mm (2.54 inches)
Stand dimensions
Height (extended) 433.4 mm (17.06 inches)
Height (compressed) 387.0 mm (15.24 inches)
Width 292.4 mm (11.51 inches)
Depth 200.3 mm (7.89 inches)
Weight
Weight with packaging 11.55 kg (25.46 lb)
Weight with stand assembly and cables
8.40 kg (18.52 lb)
Weight without stand assembly (For wall mount or VESA mount considerations - no cables)
5.98 kg (13.18 lb)
Weight of stand assembly 2.02 kg (4.45 lb)
Front frame gloss 4~7 GU
14 | About Your Monitor
Environmental Characteristics
Compliant Standards
RoHS Compliant yes
BFR/PVC Free monitor (excluding cables)
yes
Temperature
Operating 0°C to 35°C (32°F to 95°F)
Non-operating –20°C to 60°C (–4°F to 140°F)
Humidity
Operating 10% to 80% (non-condensing)
Non-operating 5% to 90% (non-condensing)
Altitude
Operating 5,000 m (16,404 ft) (maximum)
Non-operating 12,192 m (40,000 ft) (maximum)
Thermal dissipation 412 BTU/hour (maximum)
309 BTU/hour (typical)
Power Management ModesIf you have VESA’s DPM-compliant video card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as power save mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature.
VESA Modes
Horizontal Sync
Vertical Sync
Video Power Indicator Power Consumption
Normal operation
Active Active Active White 120 W (maximum)** 90 W (typical)
Active-off mode
Inactive Inactive Off White
(Glowing)
Less than 0.3 W
Switch off - - - Off Less than 0.3 W
About Your Monitor | 15
The OSD operates only in the normal operation mode. If you press any button in the active-off mode, one of the following message is displayed:
Dell UltraSharp 27 Monitor
Press any key on the keyboard or move the mouse or wake it up.
If there is no display, press the monitor button again to select
the correct input source.
UP2718Q
No DP signal from your device.
*Zero power consumption in OFF mode can only be achieved by disconnecting
the AC mains cable from the monitor.
**Maximum power consumption with maximum luminance.
Activate the computer and the monitor to gain access to the OSD.
16 | About Your Monitor
Pin Assignments
DP connector (in)
Pin number 20-pin side of the connected signal cable
1 ML3(n)
2 GND
3 ML3(p)
4 ML2(n)
5 GND
6 ML2(p)
7 ML1(u)
8 GND
9 ML1(p)
10 ML0(n)
11 GND
12 ML0(p)
13 CONFIG1
14 CONFIG2
15 AUX CH (p)
16 GND
17 AUX CH (n)
18 Hot Plug Detect
19 GND
20 +3.3V DP_PWR
About Your Monitor | 17
mDP connector
Pin number 20-pin side of the connected signal cable
1 GND
2 Hot Plug Detect
3 ML3 (n)
4 CONFIG1
5 ML3 (p)
6 CONFIG2
7 GND
8 GND
9 ML2 (n)
10 ML0 (n)
11 ML2 (p)
12 ML0 (p)
13 GND
14 GND
15 ML1 (n)
16 AUX (p)
17 ML1 (p)
18 AUX (n)
19 GND
20 +3.3V DP_PWR
18 | About Your Monitor
HDMI connector
Pin number 19-pin side of the connected signal cable
1 TMDS DATA 2+
2 TMDS DATA 2 SHIELD
3 TMDS DATA 2-
4 TMDS DATA 1+
5 TMDS DATA 1 SHIELD
6 TMDS DATA 1-
7 TMDS DATA 0+
8 TMDS DATA 0 SHIELD
9 TMDS DATA 0-
10 TMDS CLOCK+
11 TMDS CLOCK SHIELD
12 TMDS CLOCK-
13 CEC
14 Reserved (N.C. on device)
15 DDC CLOCK (SCL)
16 DDC DATA (SDA)
17 DDC/CEC Ground
18 +5 V POWER
19 HOT PLUG DETECT
About Your Monitor | 19
Universal Serial Bus (USB)
This section gives you information about the USB ports available on your monitor.
NOTE: Up to 2 A on USB downstream port (port with battery icon) with BC 1.2 compliance devices; up to 0.9 A on the other 2 USB downstream ports.
Your computer has the following USB ports:
• 2 upstream - bottom
• 4 downstream - 2 at left side, 2 at bottom
Power Charging Port - the ports with battery icon supports fast current charging capability if the device is BC 1.2 compatible.
NOTE: The monitor’s USB ports work only when the monitor is on or in the power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to resume normal functionality.
Transfer speed Data rate Power consumption
SuperSpeed 5 Gbps 4.5 W (Max., each port)
Hi-Speed 480 Mbps 2.5 W (Max., each port)
Full speed 12 Mbps 2.5 W (Max., each port)
USB upstream port USB downstream port
Pin number Signal name Pin number Signal name
1 VBUS 1 VBUS
2 D- 2 D-
3 D+ 3 D+
4 GND 4 GND
5 StdB_SSTX- 5 StdA_SSRX-
6 StdB_SSTX+ 6 StdA_SSRX+
7 GND_DRAIN 7 GND_DRAIN
8 StdB_SSRX- 8 StdA_SSTX-
9 StdB_SSRX+ 9 StdA_SSTX+
Shell Shield Shell Shield
20 | About Your Monitor
Plug-and-PlayYou can install the monitor in any Plug-and-Play-compatible system. The monitor automatically provides the computer system with its extended display identification data (EDID) using display data channel (DDC) protocols so the computer can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor.
LCD Monitor Quality and Pixel PolicyDuring the LCD monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on LCD Monitor Pixel Policy, see Dell support site at: http://www.dell.com/support/monitors.
Setting Up the Monitor | 21
Setting Up the Monitor
Attaching the Stand NOTE: The stand riser and stand base are detached when the monitor is shipped
from the factory. NOTE: The procedure below is applicable for the default stand. If you purchased
any other stand, see the documentation shipped with the stand to set it up.
CAUTION: Place monitor on a flat, clean, and soft surface to avoid scratching the display panel.
UP2718Q
Удельная мощность рабочего режима - X,XXX Вт/см
Потребляемая мощность изделием в режиме ожидания - X,XX Вт
Потребляемая мощность изделием в выключенном режиме - X,XX Вт2
Flat Panel Monitor / Monitor Plano Panel / Moniteur à écran plat /
Model No. / Modelo / Numéro de modèle /: UP2718Qt
Input Rating / Entrada / Daya Tegangan / Tension d’entrée: 100-240V ~ 50/60Hz X.XA
100-240, 1.6
50/60
Consumo de energía: XX.X Wh
Consumo de energía en modo de espera: X.XX Wh
Made in China / Fabricado en China / Fabriqués en Chine/ Сделано в Китае /
CAN ICES-3 (B)/NMB-3(B)
XUXXXXXX-XXXXX
MSIP-REM-WT1-UP2718Qt
Wistron Corporation
Wistron InfoComm (Zhongshan) Corporation
Wistron InfoComm (Zhongshan) Corporation
A/S:080-854-0066
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
Apparatets stikprop skal tilsluttes en stikkontakt med jord,
som giver forbindelse til stikproppens jord.
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
XXXXX
И005-16
X X X X X X - X X
Raheen Business Park
Limerick Ireland
www.dell.com
R43004 RoHS
ID XXXXXXXXXX
ID XXXXXXXXXX
Flicker Free
www.tuv.com
ID 1419033926
Low Blue Light
Content
www.tuv.com
ID 1419033928
DELL
U
P2718Q
Flat Panel Monitor /
Model No. / UP2718Qt
Input Rating /
100-240V ~ 50/60Hz XXA
Made in China /
Manufactured date /
Ene r gy Cons ervat io n
Ce rti fi cation
DELL
UP2718Q
Flat Panel M
onitor /
Model No. /
UP2718
Qt
Input Ratin
g /
100-2
40V ~ 50/60Hz X
XA
Made in China /
Manufactured date /
En ergy Co nser va t io
n Ce r t
i fi catio
n
3
2
To attach the monitor stand:
1 Remove the monitor protective cover and place the monitor with its front facing downward on it.
2 Insert the two tabs on the upper part of the stand to the groove on the back of the monitor.
3 Press the stand down till it snaps into its place.
22 | Setting Up the Monitor
•Align the stand base protruded blocks to the matching slot on the stand.
•Insert the stand base blocks fully into the stand slot.
•Hold the stand base with the triangle
mark facing upward.
Setting Up the Monitor | 23
•Lift the screw handle and turn the
screw clockwise.
•After fully tightening the screw, fold the
screw handle flat within the recess.
24 | Setting Up the Monitor
Using the Tilt, Swivel, and Vertical Extension NOTE: This is applicable for a monitor with a stand. If you purchased any other
stand, refer to the respective stand setup guide for set up instructions.
Tilt, Swivel and Vertical Extension
With the stand attached to the monitor, you can tilt the monitor for the most comfortable viewing angle.
5°
45° 45°145 mm
21°
NOTE: The stand is detached when the monitor is shipped from the factory.
Rotating the Monitor
Before you rotate the monitor, your monitor should be fully vertically extended and fully tilted up to avoid hitting the bottom edge of the monitor.
2
1
90°
Setting Up the Monitor | 25
NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. To download the graphics driver, go to www.dell.com/support and see the Download section for Video Drivers for latest driver updates.
NOTE: When in the Portrait View Mode, you may experience performance degradation in graphic-intensive applications (3D Gaming and etc.).
Adjusting the Rotation Display Settings of Your System
After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your System.
NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the ’contents’ on your display.
To adjust the Rotation Display Settings:
1 Right-click on the desktop and click Properties.
2 Select the Settings tab and click Advanced.
3 If you have an AMD graphics card, select the Rotation tab and set the preferred rotation. 4 If you have an nVidia graphics card, click the nVidia tab, in the left-hand column select NVRotate, and then select the preferred rotation. 5 If you have an Intel® graphics card, select the Intel graphics tab, click Graphic Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to www.dell.com/support and download the latest driver for your graphics card.
Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions.
To connect your monitor to the computer:
1 Turn off your computer.
2 Connect the DP-mDP/HDMI/USB cable from your monitor to the computer. (Vertically extend and tilt the monitor completely to rotate it for cable connection. See Rotating the Monitor.)
3 Switch on your monitor.
4 Select the correct input source at Monitor OSD Menu and turn on your computer.
NOTE: UP2718Q default setting is DP 1.4. A DP 1.1 Graphic card may not display normally. Please refer to “product specific problems – No image when using DP connection to the PC” to change default setting.
26 | Setting Up the Monitor
Single monitor connection
Connecting the DP (or mDP) cable
DP
mDP
NOTE: Default is DP port. Select input source on monitor to switch to mDP.
Connecting the HDMI cable
HDMIHDMI
Connecting the USB cable After you have completed connecting the DP-mDP cables, follow the procedure below to connect the USB 3.0 cable to the computer and complete your monitor setup:
1 a. Connect one computer:
Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port on your computer.
b. Connect two computers:
Connect the upstream USB 3.0 ports to appropriate USB 3.0 ports on the two computers. Then use the OSD menu to select between the two USB upstream sources and input sources. See USB Select Switch.
NOTE: When connecting two computers to the monitor, the monitor’s USB downstream ports for the keyboard and mouse can be assigned to different input
Setting Up the Monitor | 27
signals from the two computers by changing the USB Selection setting from the OSD menu. (See USB Selection for details)
2 Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the monitor.
3 Plug the power cables for your computer and monitor into nearby outlet.
USB
USB
a. Connect one computer
USBUSB
b. Connect two computers
4 Turn On the monitor and the computer. If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting.
Requirements to view or playback HDR content (1) via Ultra BluRay DVD or Game consoles
Ensure the DVD player and Game consoles are HDR capable, eg Panasonic DMP-UB900, x-Box One S, PS4 Pro. Download and install the appropriate graphics card drivers, see below.
(2) via PC
Ensure the graphics card used is HDR capable, ie HDMI2.0a or DP1.4(with HDR option) compliant and HDR graphics driver is installed. HDR capable player application must be used, eg Cyberlink PowerDVD 17, Windows 10 Movies and TV app.
28 | Setting Up the Monitor
For example Dell XPS8910, Alienware Aurora R5, bundled with the below graphics cards.
Dell Graphics driver with HDR support: Refer to Dell support page to download the latest graphics driver that supports HDR playback for your PC/Notebook.
Nvidia
HDR capable Nvidia graphics cards: GTX1070, GTX1080, P5000, P6000, etc. For a full range of HDR capable Nvidia graphics cards please refer to Nvidia website www.nvidia.com
Driver that supports Full Screen Playback mode(eg PC games, UltraBluRay players), HDR on Win10 Redstone 2 OS: 381.65 or later.
AMD
HDR capable AMD graphics cards: RX480, RX470, RX460, WX7100, WX5100, WX4100, etc. For a full range of HDR capable AMD graphics cards please refer to www.amd.com Check HDR driver support information and download the latest driver from www.amd.com.
Intel (Integrated Graphics)
HDR capable system: CannonLake or later
Suitable HDR player: Windows 10 Movies and TV app
OS with HDR support: Windows 10 Redstone 3
Driver with HDR support: visit downloadcenter www.intel.com for the latest HDR driver
NOTE:HDR playback via OS (eg playback of HDR in a window within desktop) requires Win 10 Redstone 2 or later with appropriate player applications, eg PowerDVD17. Playing back protected content will require appropriate DRM software and/or hardware, eg Microsoft Playready(TM). Please refer to Microsoft website for HDR support information.
Setting Up the Monitor | 29
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (see Connecting Your Monitor for cable attachment) organize all cables as shown above.
Removing the Monitor Stand
CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean surface.
NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up.
To remove the stand:
1 Place the monitor on a soft cloth or cushion.
2 Press and hold the stand-release button.
3 Lift the stand up and away from the monitor.
2
3
30 | Setting Up the Monitor
Wall Mounting (Optional)
DELL UP2718QFlat Panel Monitor / Model No. / UP2718QtInput Rating / 100-240V ~ 50/60Hz XXAMade in China / Manufactured date /
Energy
Conse rvati on Cert if
i cat ion
UP2718Q
Удельная мощность рабочего режима - X,XXX Вт/смПотребляемая мощность изделием в режиме ожидания - X,XX ВтПотребляемая мощность изделием в выключенном режиме - X,XX Вт
2
Flat Panel Monitor / Monitor Plano Panel / Moniteur à écran plat / Model No. / Modelo / Numéro de modèle / : UP2718QtInput Rating / Entrada / Daya Tegangan / Tension d’entrée: 100-240V ~ 50/60Hz X.XA
100-240 , 1.6 50/60Consumo de energía: XX.X WhConsumo de energía en modo de espera: X.XX Wh
Made in China / Fabricado en China / Fabriqués en Chine/ Сделано в Китае /
CAN ICES-3 (B)/NMB-3(B)
XUXXXXXX-XXXXXMSIP-REM-WT1-UP2718Qt
Wistron Corporation Wistron InfoComm (Zhongshan) Corporation
Wistron InfoComm (Zhongshan) CorporationA/S :080-854-0066
Apparatet må tilkoples jordet stikkontakt.Apparaten skall anslutas till jordat uttag.Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
XXXXXИ005-16
X X X X X X - X X
Raheen Business ParkLimerick Irelandwww.dell.com
R43004 RoHS
ID XXXXXXXXXX
ID XXXXXXXXXX
Flicker Free
www.tuv.comID 1419033926
Low Blue LightContent
www.tuv.comID 1419033928
NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit.
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1 Place the monitor on a soft cloth or cushion on a stable, flat table.
2 Remove the stand.
3 Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4 Attach the mounting bracket from the wall mounting kit to the monitor.
5 Mount the monitor on the wall by following the instructions that comes with the
wall mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with minimum
weight/load bearing capacity of 5.98 kg (13.18 lb).
Operating the Monitor | 31
Operating the Monitor
Turning on the Monitor
Press the button to turn on the monitor.
Using the Front Panel ControlsUse the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.
654321
32 | Operating the Monitor
The following table describes the front panel buttons:
Front-Panel Button Description
1
Shortcut key: Preset Modes
Use this button to choose from a list of preset color modes.
2
Shortcut key: Brightness/Contrast
Use this button to directly access the “Brightness/Contrast” menu.
3
Shortcut key: Input Source
Use this button to choose from a list of Input Source.
4
Menu
Use this menu button to launch the on-screen display (OSD) and select the OSD menu.
See Accessing the Menu System.
5
Exit
Use this button to go back to the main menu or exit the OSD main menu.
6
Power (with power light indicator)
Use the Power button to turn the monitor On and Off.The white LED indicates the monitor is On and fully functional.
A glowing white LED indicates DPMS Power Save Mode.
Operating the Monitor | 33
Front-Panel ButtonUse the buttons on the front of the monitor to adjust the image settings.
2 31
Front Panel Button Description
1
Up Down
Use the Up (increase) and Down (decrease) keys to adjust items in the OSD menu.
2
OK
Use the OK button to confirm your selection.
3
Back
Use the Back button to go back to the previous menu.
34 | Operating the Monitor
Using the On-Screen Display (OSD) Menu
Accessing the Menu System NOTE: Any changes you make using the OSD menu are automatically saved if
you move to another OSD menu, exit the OSD menu, or wait for the OSD menu
to disappear.
1 Press the button to launch the OSD menu and display the main menu.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
75%
75%
2 Press the and buttons to move between options. As you move from one
icon to another, the option name is highlighted.
3 Press the or or button once to activate the highlighted option.
4 Press the and buttons to select the desired parameter.
5 Press to enter the slide bar and then use the or button, according to the
indicators on the menu, to make your changes.
6 Select the to return to previous menu or to accept and return to previous
menu.
Operating the Monitor | 35
Icon Menu and Submenus
Description
Brightness/Contrast
Use this menu to activate Brightness/Contrast adjustment.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
75%
75%
Brightness Brightness adjusts the luminance of the backlight
(minimum 0; maximum 100).
Press the button to increase brightness.
Press the button to decrease brightness.
Contrast Adjust the Brightness first, and then adjust Contrast only if further adjustment is necessary.
Press the button to increase contrast and press the button to decrease contrast (between 0 and 100).
Contrast adjusts the difference between darkness and lightness on the monitor.
Input Source Use the Input Source menu to select between different video inputs that are be connected to your monitor.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
mDP
HDMI1
DP
HDMI2
Auto select
Reset Input Source
On
DP Select DP input when you are using the DP (DisplayPort) connector.
Use to select the DP input source.
36 | Operating the Monitor
Icon Menu and Submenus
Description
mDP Select mDP input when you are using the mDP (mini DisplayPort) connector.
Use to select the mDP input source.
HDMI 1 Select the HDMI 1 input when you are using the HDMI connector.
Use to select the HDMI 1 input source.
HDMI 2 Select the HDMI 2 input when you are using the HDMI connector.
Use to select the HDMI 2 input source.
Auto Select Use to select Auto Select, the monitor scans for available input sources.
Reset Input Source
Resets your monitor’s Input Source settings to the factory defaults.
Color Use the Color menu to adjust the color setting mode.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
Input Color Format
Preset Modes
Reset Color
Standard
RGB
Operating the Monitor | 37
Icon Menu and Submenus
Description
Preset Mode When you select Preset Modes, you can choose Standard, ComfortView, Movie, Game,Color Temp., Color Space, or Custom Color from the list.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
Preset Modes
Movie
Game
ComfortView
Color Temp.
Color Space
Custom Color
Standard
•Standard: Default color settings. This is the default preset mode.
•ComfortView: Decreases the level of blue light emitted from the screen to make viewing more comfortable for your eyes.
NOTE: To reduce the risk of eye strain and neck/arm/back/shoulders pain from using the monitor for long periods of time, we suggest you to :
• Set the screen about 20 to 28 inches (50-70 cm) from your eyes.
• Blink frequently to moisten or rewet your eyes when working with the monitor.
• Take regular and frequent breaks for 20 minutes every two hours.
• Look away from your monitor and gaze at a distant object at 20 feet away for at least 20 seconds during the breaks.
• Perform stretches to relieve tension in the neck/arm/back/shoulders during the breaks.
•Movie: Ideal for movies.
•Game: Ideal for most gaming applications.
•Color Temp.: The screen appears warmer with a red/yellow tint with slider set at 5,000K or cooler with blue tint with slider set at 10,000K.
NOTE: When Smart HDR is ON, Movie and Game preset modes will operate with backlight local dimming.
38 | Operating the Monitor
Icon Menu and Submenus
Description
•Color Space: Allows users to select the color space: Adobe RGB, sRGB,DCI-P3, REC2020,REC709,CAL1, CAL2.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
Preset Modes
CAL1 YYYY-MM-DD
YYYY-MM-DD
Adobe RGB
sRGB
DCI-P3
REC2020
REC709
CAL2
– Adobe RGB: This mode is compatible with Adobe RGB (100% coverage).
– sRGB: Emulates 100% sRGB.
– DCI-P3: This mode reproduces 97.7% of DCI-P3 digital cinema color standard.
– REC2020: This mode matches 76.9% REC2020 standard.
– REC709: This mode matches 100% REC709 standard.
– CAL1/CAL2: User calibrated preset mode using Dell Ultrasharp Color Calibration Software or other Dell approved software. Dell Ultrasharp Color Calibration Software works with the X-rite colorimeter i1Display Pro. The i1Display Pro can be purchased from the Dell Electronics, Software and Accessories website.
NOTE: Accuracy of sRGB, Adobe RGB, REC2020,REC709, DCI-P3, CAL1 and CAL2 are optimized for RGB input color format.
NOTE: Factory Reset will remove all calibrated data in CAL1 and CAL2.
NOTE: YYYY-MM-DD depicts last calibration date. If this space is blanked it means no calibration was saved.
Operating the Monitor | 39
Icon Menu and Submenus
Description
•Custom Color: Allows you to manually adjust the color settings. Press the and buttons to adjust the Red, Green, and Blue values and create your own preset color mode.
Use the and buttons to select the Gain, Offset, Hue, Saturation.
Dell UltraSharp 27 Monitor
Gain
O�set
Hue
Saturation
Custom Color
– Gain: Select it to adjust input RGB signal gain level (default value are 100).
– Offset: Select it to adjust RGB black-level offset value (default value are 50) to control your monitor base color.
– Hue: Select it to adjust RGBCMY hue value individually (default value are 50).
– Saturation: Select it to adjust RGBCMY saturation value individually (default value are 50).
40 | Operating the Monitor
Icon Menu and Submenus
Description
Input Color Format
Allows you to set the video input mode to:
RGB: Select this option if your monitor is connected to a computer (or DVD player) using the HDMI or DP-mDP cable.
YPbPr: Select this option if your DVD player supports only YPbPr output.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
Input Color Format RGB
YPbPr
Hue Use or to adjust the hue from 0 to 100.
NOTE: Hue adjustment is available only for Movie and Game mode.
Saturation Use or to adjust the saturation from 0 to 100.
NOTE: Saturation adjustment is available only for Movie and Game mode.
Reset Color Resets your monitor’s color settings to the factory defaults.
Display Use the Display menu to adjust image.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
Normal
O�
Response Time
Sharpness
Uniformity Compensation
Smart HDR
50
Wide 16:9
Vivid
Aspect Ratio
Reset Display
Operating the Monitor | 41
Icon Menu and Submenus
Description
Aspect Ratio Adjust the image ratio to Wide 16:9, Auto Resize, 4:3, or 1:1.
Sharpness Makes the image look sharper or softer.
Use or to adjust the sharpness from ‘0’ to ‘100’.
Response Time Allows you to set the Response Time to Normal or Fast.
Uniformity Compensation
Select screen brightness and color uniformity compensation settings.
Uniformity Compensation adjusts different areas of the screen with respect to the center to achieve uniform brightness and color over the entire screen.
Smart HDR Allow you to set the HDR to OFF, Normal or Vivid.
NOTE:Vivid maps to REC 2020. Normal maps to DCI-P3.
Reset Display Restores the display settings to factory defaults.
PIP/PBP This function brings up a window displaying image from another input source. Thus you can watch two images from different sources at the same time.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
O�PIP/PBP Mode
Main WindowSub - Window
DP mDP HDMI 1 HDMI 2
DP X √ √ √mDP √ X √ √
HDMI 1 √ √ X √HDMI 2 √ √ √ X
42 | Operating the Monitor
Icon Menu and Submenus
Description
PIP/PBP Mode Adjusts the PBP (Picture by Picture) model to PIP Small, PIP Large, or PBP. You can disable this feature by selecting Off.
PIP Small PIP Large PBPO�
PIP/PBP (Sub) Select between the different video signals that may be connected to your monitor for the PIP/PBP sub-window.
PIP Location Select PIP sub-window position.
Use or to browse and to select Top-Right, Top-Left, Bottom-Right, or Bottom-left.
USB Select Switch
Select to switch between the USB upstream sources in PBP mode.
Audio Allows you to set the audio source from the main window or the sub-window.
Contrast (Sub) Change Contrast settings of Sub video.
Operating the Monitor | 43
Icon Menu and Submenus
Description
USB Selection Select the USB upstream signals from the list: DP, mDP and HDMI, thus the monitor’s USB downstream port (eg. keyboard and mouse) can be used by the current input signals when connecting a computer to either one of the upstream ports.
The display and USB upstream ports connection can be changed by selecting the input source function.
When you use only one upstream port, the connected upstream port is active.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
DP
HDMI 1
USB 1
USB 2
NOTE: To prevent data damage or loss, before changing USB upstream ports, make sure that NO USB storage devices are in use by the computer connected to the monitor’s USB upstream port.
USB 1 Use the to Indicate the input signal for USB 1.
USB 2 Use the to Indicate the input signal for USB 2.
44 | Operating the Monitor
Icon Menu and Submenus
Description
Menu Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
English
20
20 s
Transparency
Language
Timer
Reset Menu
Language Set the OSD display to one of eight languages.
(English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese).
Transparency Select this option to change the menu transparency by using and (min. 0 / max. 100).
Timer OSD Hold Time: Sets the length of time the OSD remains active after you press a button.
Use the and buttons to adjust the slider in 1-second increments, from 5 to 60 seconds.
Reset Menu Restore the menu settings to factory defaults.
Personalize Select from Preset Modes, Brightness/Contrast, Input Source, Aspect Ratio,PBP Mode, or Smart HDRand set as shortcut key.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
On During Active
O� During Standby
Power Button LED
Shortcut Key 3
USB
Monitor Sleep
Input Source
Brightness/Contrast
Enable
Preset Modes
Shortcut Key 2
Reset Personalization
Shortcut Key 1
Power Button LED
Allows you to set the state of the power light to save energy.
Operating the Monitor | 45
Icon Menu and Submenus
Description
USB Allows you to enable or disable USB function during monitor standby mode.
NOTE: USB ON/OFF under standby mode is only available when the USB upstream cable is unplugged. This option will be greyed out when the USB upstream cable plugs in.
Monitor Sleep Sleep After Timeout: Monitor goes into sleep after timeout.
Never: Monitor never goes into sleep.
Reset
Personalization
Restores shortcut keys to factory defaults.
OtherDell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
O�LCD Conditioning
DDC/CI On
Enable
On
M2T101
Auto Rotation
Firmware
Display Info
Acknowledge SDK Access
Reset Others
Factory Reset
Select this option to adjust the OSD settings, such as the DDC/CI, LCD conditioning, and so on.
Display Info Displays the monitor’s current settings.
Auto Rotation The OSD shall be rotated to clockwise or anti-clockwise depending on the direction of the display is pivoted.
46 | Operating the Monitor
Icon Menu and Submenus
Description
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor settings using software on your computer.
Select Off to turn off this feature.
Enable this feature for best user experience and optimum performance of your monitor.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
O�
DDC/CI On
LCD Conditioning
Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. Select On to start the process.
Dell UltraSharp 27 Monitor
Brightness/Contrast
PIP/PBP
USB Selection
Color
Display
Menu
Input Source
Personalize
Others
LCD Conditioning On
O�
Firmware Firmware version
Acknowledge SDK Access
Allow you to acknowledge application’s access to monitor.
Reset Others Restores other settings, such as DDC/CI, to factory defaults.
Factory Reset Restores all OSD settings to the factory defaults.
NOTE: This monitor has a built-in feature to automatically calibrate the brightness
to compensate for LED aging.
Operating the Monitor | 47
OSD Warning Messages
When the monitor does not support a particular resolution mode, you can see the following message:
Dell UltraSharp 27 Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to
listed timing as per the monitor specifications.
3840x2160, 60Hz or any other monitor
UP2718Q
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 3840 x 2160.
You can see the following message before the DDC/CI function is disabled:
Dell UltraSharp 27 Monitor
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes No
UP2718Q
When the monitor enters the Power Save mode, the following message appears:
Dell UltraSharp 27 Monitor
Entering Power Save Mode.
UP2718Q
48 | Operating the Monitor
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, the following messages will appear depending on the selected input:
Dell UltraSharp 27 Monitor
Press any key on the keyboard or move the mouse or wake it up.
If there is no display, press the monitor button again to select
the correct input source.
UP2718Q
No DP signal from your device.
When user try to change preset mode when Smart HDR is ON, the following message will show:
Dell UltraSharp 27 Monitor
Currently processing HDR content…
To change preset mode, stop playing the HDR content.
Alternatively, switch o� the Smart HDR function in Display settings.
UP2718Q
If any B/L zone operate > 90% duty cycle for 30min continuously, will turn off B/L local dim/boost for 30min. When the local dimming is disable,the following messages will appear on screen for 3 seconds:
Dell UltraSharp 27 Monitor
Backlight Local Dimming is Disabled.
UP2718Q
If either DP, mDP, HDMI1 or HDMI2 input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears.
Dell UltraSharp 27 Monitor
The display will go into Power Save Mode in 4 minutes.
No DP Cable
www.dell.com/support/monitors
UP2718Q
or
Operating the Monitor | 49
Dell UltraSharp 27 Monitor
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
UP2718Q
No mDP Cable
or
Dell UltraSharp 27 Monitor
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
UP2718Q
No HDMI1 Cable
or
Dell UltraSharp 27 Monitor
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
UP2718Q
No HDMI2 Cable
See Troubleshooting for more information.
50 | Troubleshooting
Troubleshooting
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
Self-TestYour monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1 Turn off both your computer and the monitor.
2 Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove all digital and the analog cables from the back of computer.
3 Turn on the monitor.
The floating dialog box should appear on-screen (against a black background), if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen.
Dell UltraSharp 27 Monitor
The display will go into Power Save Mode in 4 minutes.
No DP Cable
www.dell.com/support/monitors
UP2718Q
or
Dell UltraSharp 27 Monitor
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
UP2718Q
No mDP Cable
Troubleshooting | 51
or
Dell UltraSharp 27 Monitor
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
UP2718Q
No HDMI1 Cable
or
Dell UltraSharp 27 Monitor
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
UP2718Q
No HDMI2 Cable
4 This box also appears during normal system operation, if the video cable becomes disconnected or damaged.
5 Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.
52 | Troubleshooting
Built-in DiagnosticsYour monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card.
NOTE: You can run the built-in diagnostics only when the video cable is unplugged
and the monitor is in self-test mode.
654321To run the built-in diagnostics: 1 Make sure that the screen is clean (no dust particles on the surface of the screen).
2 Unplug the video cable(s) from the back of the computer or monitor. The monitor
then goes into the self-test mode.
3 Press and hold Button 1 for 5 seconds. A gray screen appears.
4 Carefully inspect the screen for abnormalities.
5 Press Button 1 on the front panel again. The color of the screen changes to red.
6 Inspect the display for any abnormalities.
7 Repeat steps 5 and 6 to inspect the display in green, blue, black, white, and text
screens.
The test is complete when the text screen appears. To exit, press Button 1 again. If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.
Troubleshooting | 53
Common Problems
The following table contains general information about common monitor problems you might encounter and the possible solutions:
Common Symptoms
What You Experience Possible Solutions
No Video/Power LED off
No picture •Ensure that the video cable connecting the monitor and the computer is properly connected and secure.
•Verify that the power outlet is functioning properly using any other electrical equipment.
•Ensure that the power button is depressed fully.•Ensure that the correct input source is selected in
the Input Source menu.
No Video/Power LED on
No picture or no brightness
•Increase brightness & contrast controls via OSD.•Perform monitor self-test feature check.•Check for bent or broken pins in the video cable
connector.•Run the built-in diagnostics.•Ensure that the correct input source is selected in
the Input Source menu.
Missing Pixels LCD screen has spots
•Cyclepoweron-off.•Pixelthatispermanentlyoffisanaturaldefect
that can occur in LCD technology.•FormoreinformationonDellMonitorQuality
and Pixel Policy, see Dell Support site at: http://www.dell.com/support/monitors.
Stuck-on Pixels LCD screen has bright spots
•CyclepowerOn-Off.•Pixelthatispermanentlyoffisanaturaldefect
that can occur in LCD technology.•FormoreinformationonDellMonitorQuality
and PixelPolicy, see Dell Support site at: http://www.dell.com/support/monitors.
Brightness Problems
Picture too dim or too bright
•Reset the monitor to factory settings.•Adjust brightness & contrast controls via OSD.
Safety Related Issues
Visible signs of smoke or sparks
•Do not perform any troubleshooting steps.•Contact Dell immediately.
Intermittent Problems
Monitor malfunctions on & off
•Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
•Resetthemonitortofactorysettings.•Perform monitor self-test feature check to
determine if the intermittent problem occurs in self-test mode.
54 | Troubleshooting
Common Symptoms
What You Experience Possible Solutions
Missing Color Picture missing color
•Perform monitor self-test.•Ensure that the video cable connecting the
monitor to the computer is connected properly and is secure.
•Check for bent or broken pins in the video cable connector.
Wrong Color Picture color not good
•Change the settings of the Preset Modes in the Color menu OSD depending on the application.
•Adjust R/G/B value under Custom. Color in Color menu OSD.
•Change the Input Color Format to PC RGB or YPbPr in the Color menu OSD.
•Run the built-in diagnostics.
Image retention from a static image left on the monitor for a long period of time
Faint shadow from the static image displayed appears on the screen
•Use the Power Management feature to turn off the monitor at all times when not in use (for more information, see Power Management Modes).
•Alternatively, use a dynamically changing screensaver.
Product Specific Problems
Specific Symptoms
What You Experience
Possible Solutions
Screen image is too small
Image is centered on screen, but does not fill entire viewing area
•Check the Aspect Ratio setting in the Display menu OSD.
•Reset the monitor to factory settings.
No Input Signal when user controls are pressed
No picture, the LED light is white
•Check the signal source. Ensure the computer is not in the power saving mode by moving the mouse or pressing any key on the keyboard.
•Check whether the signal cable is plugged in properly. Re-plug the signal cable if necessary.
•Reset the computer or video player.
The picture does not fill the entire screen
The picture cannot fill the height or width of the screen
•Due to different video formats (aspect ratio) of DVDs, the monitor may display in full screen.
•Run the built-in diagnostics.
Troubleshooting | 55
Specific Symptoms
What You Experience
Possible Solutions
No image when using DP connection to the PC
Black screen •Verify which DP standard (DP 1.1a or DP 1.4) is your Graphics Card certified to. Download and install the latest graphics card driver.
•Some DP 1.1a graphics card cannot support DP 1.4 monitors. Go to OSD menu, under Input Source selection, press and hold DP select key for 8 sec to change the monitor setting from DP 1.4 to DP 1.1a.
Universal Serial Bus (USB) Specific Problems
Specific Symptoms
What You Experience
Possible Solutions
USB interface is not working
USB peripherals are not working
•Check that your monitor is turned ON.•Reconnect the upstream cable to your computer.•Reconnect the USB peripherals (downstream
connector).•Switch off and then turn on the monitor again.•Reboot the computer.•Some USB devices like external portable HDD
require higher electric current; connect the device directly to the computer system.
Supre Speed USB 3.0 interface is slow.
Super Speed USB 3.0 peripherals working slowly or not working at all
•Check that your computer is USB 3.0-capable.•Some computers have USB 3.0, USB 2.0, and
USB 1.1 ports. Ensure that the correct USB port is used.
•Reconnect the upstream cable to your computer.•Reconnect the USB peripherals (downstream
connector).•Reboot the computer.
Wireless USB peripherals stop working when a USB 3.0 device is plugged in
Wireless USB peripherals responding slowly or only working as the distance between itself and its receiver decreases
•Increase the distance between the USB 3.0 peripherals and the wireless USB receiver.
•Position your wireless USB receiver as close as possible to the wireless USB peripherals.
•Use a USB-extender cable to position the wireless USB receiver as far away as possible from the USB 3.0 port.
56 | Appendix
Appendix
Safety InstructionsFor displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.For information on safety instructions, see the Safety, Environmental, and Regulatory Information (SERI).
FCC Notices (U.S. only) and Other Regulatory InformationFor FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com/regulatory_compliance.
Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact
information on your purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.
To get online Monitor support content:
See www.dell.com/support/monitors.
To contact Dell for sales, technical support, or customer service issues:
1 Go to www.dell.com/support.
2 Verify your country or region in the Choose A Country/Region drop-down menu
at the top-left corner of the page.
3 Click Contact Us next to the country dropdown.
4 Select the appropriate service or support link based on your need.
5 Choose the method of contacting Dell that is convenient for you.
Appendix | 57
Setting Up Your Monitor
Setting Display Resolution to 3840 x 2160 (maximum)For best performance, set the display resolution to 3840 x 2160 pixels by performing the following steps:
In Windows Vista, Windows 7, Windows 8 or Windows 8.1:
1 For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic
desktop.
2 Right-click on the desktop and click Screen Resolution.
3 Click the Dropdown list of the Screen Resolution and select 3840 x 2160.
4 Click OK.
In Windows 10:
1 Right-click on the desktop and click Display Settings.
2 Click Advanced display settings.
3 Click the dropdown list of Resolution and select 3840 x2160.
4 Click Apply.
If you do not see the recommended resolution as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the computer system you are using, and follow the given steps.
Dell computer 1 Go to www.dell.com/support, enter your service tag, and download the latest driver for your graphics card.
2 After installing the drivers for your graphics adapter, attempt to set the resolution to
3840 x 2160 again.
NOTE: If you are unable to set the resolution to 3840 x 2160, please contact Dell
to inquire about a graphics adapter that supports these resolutions.
58 | Appendix
Non-Dell computerIn Windows Vista, Windows 7, Windows 8 or Windows 8.1:
1 For Windows 8 or Windows 8.1 only, select the Desktop tile to switch
to classic desktop.
2 Right-click on the desktop and click Personalization.
3 Click Change Display Settings.
4 Click Advanced Settings.
5 Identify your graphics controller supplier from the description at the top of the
window (e.g. NVIDIA, AMD, Intel etc.).
6 Refer to the graphic card provider website for updated driver (for example,
http://www.AMD.com or http://www.NVIDIA.com).
7 After installing the drivers for your graphics adapter, attempt to set the resolution
to 3840 x 2160 again.
In Windows 10:
1 Right-click on the desktop and click Display Settings.
2 Click Advanced display settings.
3 Click Display adapter properties.
4 Identify your graphics controller supplier from the description at the top of the
window (e.g. NVIDIA, AMD, Intel etc.).
5 Refer to the graphic card provider website for updated driver (for example,
http://www.AMD.com or http://www.NVIDIA.com).
6 After installing the drivers for your graphics adapter, attempt to set the resolution
to 3840 x 2160 again.
NOTE: If you are unable to set the recommended resolution, please contact the manufacturer of your computer or consider purchasing a graphics adapter that supports the video resolution.
Appendix | 59
Maintenance Guidelines
Cleaning Your Monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from
the electrical outlet. CAUTION: Read and follow the Safety Instructions before cleaning the monitor.
For best practices, follow these instructions in the list below while unpacking, cleaning, or handling your monitor:
• To clean your anti-static screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the anti-static coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
• Use a lightly-dampened, soft cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.
• If you notice white powder when you unpack your monitor, wipe it off with a cloth.
• Handle your monitor with care as a darker-colored monitor may get scratched and show white scuff marks more than a lighter- colored monitor.
• To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.