DEMVE a Multi-Vendor Laboratory Environment for Research and Education

Related to IEC 61850

21.3.2012 1

Renewable Efficient Energy II Conference

Vaasa 21.3.2012

Reino Virrankoski

University of Vaasa

Department of Computer Science

Communications and Systems Engineering Group

DEMVE

Coordinated by Merinova, funded organizations the University of Vaasa

Vaasa University of Applied Sciences (VAMK)

Novia University of Applied Sciences

Duration 24 months on 1.8.2011-31.7.2013

Building up a multi-vendor environment under IEC 61850 to Technobothnia for research and education purposes IEC 61850 training can then be offered in the context of Vaasa Energy

Institute (VEI)

21.3.2012 2

Companies Participating to DEMVE-project

21.3.2012 3

IEC 61850

A standard for electrical substation automation; extended also for communication between substations An important enabler of local electricity production

An important enabler of monitoring and control soutions required for Smart Grid

Object oriented monitoring and control information for substation control and protection

The abstract data models defined in IEC 61850 can be mapped to a number of communication protocols

21.3.2012 4

1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009

WG 10 System Overview

WG 11 Coding and Mapping

WG 12 Process Interfaces

WG 10

WG 11

IEC 61850

Part 1 Introduction and Overview

Part 2 Glossary

Part 3 General requirements

Part 4 System and project management

Part 5 Communication requirements for functions and device models

Part 6 Configuration description language

Part 7 Basic communication structure, Principles and models

Part 8 Mappings to MMS

Part 9 Specific communication service mapping (SCSM)

Part 10 Conformance testing

Part 90-1 FOR THE COMMUNICATION BETWEEN SUBSTATIONS

IEC 61850 Development History

Committee draft

Committee draft for voting

Final draft International Standard in Nimes 2004

International Standard

Process continues by technical issues - TISSUES

Baden November 1995 Around 65 persions First interoperability

tests of bay devices

FDFV Standard

2009-05-11

21.3.2012 5

Application Areas of IEC 61850 Standard

Industrial Bus

Process Bus

IEC 61850-9-2

Station Bus

IEC 61850-8-1

Cyber Security

Application

WAN

Multi Vendor Environment

M

Station Bus

IEC 61850-8-1

G

Station Bus

IEC 61850-8-1

Distributed

Power Plan

Control Centers

21.3.2012 6

IEC 61850 Multi-Vendor Environment

Siemens Terminals

VAMP Terminals

ABB Terminals

Switch & Mervento Wind Turbines

Vacon Terminals Schneider

Electric Terminals

21.3.2012 7 Erkki Antila, University of Vaasa

Challenges Related to IEC 61850

The standard enables distributed packet-connected control architecture, which is necessary to be able to enable local electricity production. It can also increase the system reliability. However, it is a big technological step for the automation systems.

The standard allows many different options. As a consequence, the vendor spesific solutions can still be an issue and the compatibility between different vendors is currently not fully guaranteed.

21.3.2012 8

21.3.2012 9

IEC 61850/Ethernet

Fibre

Optic

Test Rack 1

Distribution Network 1

2 pcs ABB REF630

2 pcs SE MiCOM P139

2 pcs Siemens 7SJ6311

IEC 61850/Ethernet

RJ45/CAT6

Control Center Rack 1 (Schneider Electric)

System Configuration Editor (SCE)

System Management Tool (SMT)

MiCOM S1 Studio

Workstation 1

Workstation 3

Control Center Rack 2 (ABB)

IEC 61850/Ethernet

Backbone-fibre optic

Waveform recording tool

VAMPSET ICD-file, IED Capab. Descr.

IID-file, IED Description

SCD EDITOR SCD-file, Substation Conf. Descr.

ICD-file of IED -> CID/IID, SCD & txt files

COM600

Communication

Gateway

System

Diagnostics

PCM600 Ver. 2.4 Engineering Pro + IET600

SAB600 Ver. 3.5

Workstation 2

Test Rack 2

Distribution Network 2

2 pcs ABB REF615

2 pcs VAMP 255

2 pcs Siemens 7SJ8011

IEC 61850/Ethernet

RJ45/

CAT6

Test Rack 3

Subtransmission Network

ABB RET630 & REF630

VAMP 265 & VAMP 255

2 pcs Siemens 7SJ6311

IEC 61850/Ethernet

Fibre

Optic

Protection Relay Test Set

and Commissioning Tool

Test Rack 4

Distributed Power Generation

2 pcs eroonkytkentyksikk (ABB & VAMP)

2 pcs Power Converter (ABB & Vacon)

Option for line differential relays (2 pcs ABB RED615)

IEC 61850/Ethernet

RJ45/

CAT6

IEC 60870-5-104/

Ethernet

RJ45/CAT6

MicroSCADA Pro Ver. 9.3

Substation Control System PACiS

Substation Control System

IEC 61850 Multi-Vendor Environment in Technobothnia

Building up to be

completed during

Q2/2012

Research Issues Related to IEC 61850 Multi-Vendor Environment in Technobothnia

21.3.2012 10

Creation of core criterias to enable the compatibility between different vendors.

Classification and instruction of interface requirements such that the automation requirements are filled.

Reasearch regarding the compatibility of the files created by the software tools of different vendors.

A simple conversion middleware will be made for the most important interfaces, if needed.

Interfacing with wireless communication (long distance links, wireless sensor networks, etc.)

Possible Training Courses based on IEC 61850 Multi-Vendor Environment in Technobothnia

21.3.2012 11

The Basics of IEC 61850

How to Implemant IEC 61850 Based System

IEC 61850 Configuration Programs

GOOSE Configuration For one vendor devices

For multi-vendor devices

Remote Terminal Unit (RTU) Configuration Adding single vendor devices to RTU

Adding multi-vendor devices to RTU

Implementing a Control Center in IEC 61850 Environment

Wireless Automation Under IEC 61850

12

Questions?

Remember 3rd Workshop on Wireless Communication and Applications

in Vaasa on 25.-26.4.2012

Day 1 (25.4.): Wireless Automation

Day 2 (26.4.): Tactical Communication Systems

Registration is mandatory, but free of charge.

See http://cs.uwasa.fi/wowca2012/ for further details

http://cs.uwasa.fi/wowca2012/