DENON TU-604CI

6 zone expandable multi tuner

• Key Features

– 6 independent tuner possibility– 2 build in FM/AM Tuners– 4 Expansion slots for Additional FM/AM or DAB tuners– Independent triggers + master trigger– Web interface for setup and remote assistance– Ip/RS232 control with easy to understand RS232

protocol

DENON TU-604CI

• Front panel

DENON TU-604CI

Power button + Indicator

Band mode button

Tuner Module on/offselection

Functionbuttons

RDSPTPTYbuttons

Setupbutton Jog dail/

Push to select

Return/Statusbutton

Memory button Mode

button

DisplayDimmer

DisplayWith remote sensor

Tuning buttons

Tuner on/off indicator

Shift button

Tuner select

• Back Panel

DENON TU-604CI

DAB/FM-AMTuner Expansion slots

Build inFM/AM tuner

Ethernet portRS232port

Remote bus in/out3.5mm jack

Master trigger

Tuner moduleindependent trigger 12v

Tuner moduleIndependent Stereo line out

• Tuner modulesFM/AM TUNER module

Specification;– Fm 87.5 – 108.00 MHz– AM 522 – 1611 KHz– Sensitivity FM 1.0 uV– Sensitivity AM 18uV– s/n Stereo 70dB – F-type antenna connector

DENON TU-604CI

Presets and line connectivity are on the TU-604 Ci for each module slot

DENON TU-604CI

• Tuner modules– DAB TUNER module

• Specification;– BandIII

174.928 – 239.200 MHz– Band L

1452.960 – 1490.624 MHz– Sensitivity band III -98dB– Sensitivity band L -94 dB– s/n Stereo 90dB– F-type Antenna connector

Presets and line connectivity are on the TU-604 Ci for each module slot

DENON TU-604CI• Tuner module installation

Power off the unitUn tighten the screws of the blind platesTake away the blind plates which cover the Tuner slots

• Tuner module installationDENON TU-604CI

Insert the tuner module into the SlotsYou can add DAB or FM/AM modules in any slotFit the screws back to secure the modules.The modules are direct recognized

• Web Interface

DENON TU-604CI

The Web interface can be accessed by entering the provided IP address of the router to the TU-604CIIn the Internet explorer

From here you have the abilityto select between;

- Unit control- Setup menu- Unit rename

Default is the name of the module Slot

• Unit Control

DENON TU-604CI

Use this page to control:-Power (ON/OFF)-Tuner (ON/OFF)-Tuner Band (FM/AM or DAB-Frequency-Memory Preset

Select tuner (module)Select preset and frequency

Display Select memory

Via select tuner you can select the module you want to control

• Setup Menu

DENON TU-604CI

Assign Preset banks to the Tuner modules

• Main Setup

DENON TU-604CI

Select Tuner module to prepare for control.

(FM/AM module or DAB)

Tuner 1 and 2 are FM/AM build in

• Setup Menu

DENON TU-604CI

Tuner Preset (A1 to G8) including:

- Memory Preset number- Radio Band (FM/AM)- Frequency

DENON TU-604CI

• Option Setup

Basic settings for the general control of the TU-604 CI:

- Dimmer Level (Bright/Dim/Dark/OFF)

- Remote ID (1/2/3/4) (set the remote code set for the module)

- Remote Lock (ON/OFF) (to avoid remote control)

- Setup Lock (ON/OFF) (lock the unit to avoid changes)

- RS-232 Power (ON/OFF) ( Enables rs232 control from standby mode)

- Firmware Update

DENON TU-604CI

Unit Rename

Use this page to change the name of Each tuner modules in the unit.

This is a useful tool to identify the tuner modules in a project

• Unit rename

DENON TU-604CI

• Save & Load

Save / Load

Use this pages to save your settings and to restore in case of accidental erasing.

You can also upload settings in another TU-604CI

Your projects are stored in your computer.

DENON TU-604CI6 zone expandable multi tuner

• RS232 controlStraight connection

Pin1: GND, Pin2: TxD, Pin3: RxD, Pin5: Common (GND)

Settings:Communication Speed : 9600bps

Character Length : 8 bitsParity Control : NoneStart Bit : 1 bitStop Bit : 1 bit

Example:STMS*ANFM<CR> : Select analog tuner FM bandTPS*ANUP<CR> : Select tuner preset one position upTMS*ANMANUAL<CR> : Tuning frequency manual mode.

The complete RS232 protocol files are downloadable on the Denon web site:TU-604CI http://www.usa.denon.com/TU604CI-IRCodes_V01.pdf