department of electrical engineering, southern taiwan university 1 commutation torque ripple...
TRANSCRIPT
![Page 1: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/1.jpg)
Department of Electrical Engineering, Southern Taiwan University
Department of Electrical Engineering, Southern Taiwan University
1
Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor
Drive
Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor
Drive
Student: Hsin-Feng Tu Professor: Ming-Shyan WangDate : Dec,29,2010
Dae-Kyong Kim, Kwang-Woon Lee, and Byung-Il Kwon, Member, IEEE, IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 21, NO. 6, NOVEMBER
2006
![Page 2: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/2.jpg)
2Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Outline
Abstract Introduction Sensorless BLDC Motor Control Commutation Torque Ripple Reduction Strategy
Analysis of Commutation Torque Ripple Voltage Disturbance Rejection Method Implementation of the Proposed Strategy
Experimental Results Conclusion References
![Page 3: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/3.jpg)
3Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Abstract
Presents a novel method to reduce commutation torque ripple in a position sensorless brushless dc (BLDC) motor drive.
Measures commutation interval from the terminal voltage of a BLDC motor.
Calculates a pulsewidth modulation (PWM) duty ratio using the measured commutation interval to suppress the commutation torque ripple.
Implemented in an air conditioner compressor controller reduces not only the pulsating currents but also vibrations of a position-sensorless BLDC motor.
![Page 4: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/4.jpg)
4Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Introduction
Permanent magnet brushless dc (BLDC) motors have used wide application due to their power density and ease of control.
Since the proposed method directly measures commutation interval from motor terminal voltage waveforms, it does not require a current sensor and current control loop.
The experimental results show that the proposed method considerably reduces not only current ripples but also the vibrations of the compressor.
![Page 5: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/5.jpg)
5Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Sensorless BLDC Motor Control
Commutation points of the inverter can be obtained by knowing
the zero-cross-point (ZCP) of the back-EMF and a speed
dependent period of time delay.
The commutation points are estimated like this
( )zcpT k is the zero crossing time of the back-EMF
![Page 6: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/6.jpg)
6Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Sensorless BLDC Motor Control
Fig. 1. (a) Configuration of a BLDC motor drive
![Page 7: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/7.jpg)
7Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Sensorless BLDC Motor Control
Fig. 1.(b) switching pattern
![Page 8: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/8.jpg)
8Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Sensorless BLDC Motor Control
Fig. 1.(c) terminal voltage sensing circuit
![Page 9: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/9.jpg)
9Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Sensorless BLDC Motor Control
Fig. 1.(d) terminal voltage waveforms
![Page 10: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/10.jpg)
10Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Analysis of Commutation Torque Ripple
Average voltage applied to a non-commutated phase before commutation is
1mV
![Page 11: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/11.jpg)
11Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Analysis of Commutation Torque Ripple
Fig. 2. Current paths in out-going unipolar PWM scheme when the phase current is being transferred from phase A to phase B.
![Page 12: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/12.jpg)
12Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Analysis of Commutation Torque Ripple
From Fig. 2, the phase voltage equation during commutation is given as
![Page 13: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/13.jpg)
13Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Analysis of Commutation Torque Ripple
In case of an out-going phase unipolar PWM ,average voltage appliedto a non-commutated phase is
2mV
From (3) and (8), it is apparent that the average voltage of the noncommutationed phase is disturbed by commutation. voltage disturbance generates pulsating current, pulsating current causes undesirable torque ripple during the commutation.
![Page 14: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/14.jpg)
14Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Voltage Disturbance Rejection MethodIn order to minimize the pulsating current, the PWM duty ratio during commutation must be modified as (9) in order that the average voltage of the non-commutated phase maintains constant value, that is 2m mV V
If the phase back-EMF assumes constant in the commutation period and rotational velocity of motor, the phase back-EMF is given as
Equation (9) is adjusted as in
![Page 15: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/15.jpg)
15Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Implementation of the Proposed Strategy
Fig. 3. Synchronization of the gating signals.
![Page 16: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/16.jpg)
16Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Implementation of the Proposed Strategy
Fig. 4. Configuration of the proposed controller
![Page 17: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/17.jpg)
17Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Experiment Results
Fig. 5. Configuration of the experimental BLDC motor drive
![Page 18: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/18.jpg)
18Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Experiment Results
Fig. 6. Single rotary compressor and air conditioner for experimental test
![Page 19: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/19.jpg)
19Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Experiment Results
![Page 20: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/20.jpg)
20Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Experiment Results
Fig. 7. Measured duration of commutation in the rotary compressor with a BLDC motor
![Page 21: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/21.jpg)
21Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Experiment Results
Fig. 8. Simulation results at running frequency (50 Hz). (a) Conventional control. (b) Proposed control
![Page 22: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/22.jpg)
22Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Experiment Results
Fig. 9. Terminal voltage and phase current at running frequency (30 Hz). (a) Conventional control. (b) Proposed control
![Page 23: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/23.jpg)
23Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Experiment Results
Fig. 10. Terminal voltage and phase current at running frequency (75 Hz). (a) Conventional control. (b) Proposed control
![Page 24: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/24.jpg)
24Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Experiment Results
Fig. 11. Total vibration measured at the center of the compressor body
![Page 25: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/25.jpg)
25Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Conclusion
This paper has proposed a commutation torque ripple reduction method for a position sensorless BLDC motor drive for he air conditioner.
Since the proposed method uses terminal voltage for measuring the commutation interval, the method does not require current sensors and a current control loop so that it is suitable for a low cost BLDC motor drive.
Experimental results have proved that the proposed control method considerably reduces not only the pulsating currents but also up to 31% of the total vibrations for the BLDC motor.
![Page 26: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/26.jpg)
26Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
References
[1] Electric Power Research Institute, “Electric Motors; Markets, Trends, and Applications,” Tech. Rep. TR-100423, Jun. 1992.
[2] R. Calson, M. Lajoie-Mazenc, and J. Fagundes, “Analysis of torque ripple due to phase commutation in brushless dc machines,” IEEE Trans. Ind. Appl., vol. 28, no. 3, pp. 632–638, May/Jun. 1992.
[3] Y. Murai, Y. Kawase, K. Ohashi, K. Nagatake, and Okuyama, “Torque ripple improvements for brushless dc miniature motors,” IEEE Trans. Ind. Appl., vol. IA-25, no. 3, pp. 441–450, May/Jun. 1989.
[4] T. M. Jahns and W. L. Soong, “Pulsating torque minimization techniques for permanent magnet ac motor drives-a review,” IEEE Trans. Ind. Electron., vol. 43, no. 2, pp. 321–330, Apr. 1996.
[5] P. Pillay and R. Krishnan, “Modeling, simulation, and analysis of permanent-magnet motor drives, Part II: The permanent-magnet synchronous drive,” IEEE Trans. Ind. Appl., vol. IA-25, no. 2, pp. 265–273, Mar./Apr. 1989.
![Page 27: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/27.jpg)
27Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
References
[6] C. Berendsen, G. Champenois, and A. Bolopion, “Commutation strategies for brushless dc motors: Influence of instant torque,” IEEE Trans. Power Electron., vol. 8, no. 2, pp. 231–236, Apr. 1993.[7] K. W. Lee, “Current control algorithm to reduce torque ripple in brushles dc motors,” in Proc. ICPE’98, 1998, vol. 1, pp. 380–385.[8] X. Zhang, “A new method to minimize the commutation torque ripple in trapezoidal BLDC motor with sensorless drive,” in Proc. PIEMC’00, 2000, vol. 2, pp. 607–611.[9] T. Endo and F. Tajima, “Microcomputer controlled brushles motor without a shaft mounted position sensor,” in Proc. IPEC’83, Tokyo, Japan, 1983, pp. 1339–1345.[10] K. Iizuka, “Microcomputer control for sensorless brushless motor,” IEEE Trans. Ind. Appl., vol. IA-27, no. 3, pp. 595–601, May/Jun. 1985.[11] K. Rajashekara, A. Kawamaura, and K. Matsuse, Sensorless Control of AC Motor Drives. New York: IEEE Press, 1996.
![Page 28: Department of Electrical Engineering, Southern Taiwan University 1 Commutation Torque Ripple Reduction in a Position Sensorless Brushless DC Motor Drive](https://reader035.vdocuments.net/reader035/viewer/2022062713/56649f445503460f94c649c1/html5/thumbnails/28.jpg)
28Department of Electrical Engineering, Southern Taiwan UniversityDepartment of Electrical Engineering, Southern Taiwan University
Thanks for your attention!