deprag schulz gmbh u. co - depragusa.com · interface i/o part no. - - 117237 117237 - - 117239...

machines unlimited

SOFTWARE SOLUTIONS

2 3

Contents

Required Software

• forASTisequencecontroller(ASTi6/ASTi40)–fortheoperationandparameterizationoftheDPU page3

Optional Software

• forASTsequencecontroller,ComCenter10,MINIMAT-EDDigitalelectricScrewdriverandADAPTIVEDFS page4/5• activationkeys(forASTsequencecontrollerandpositioncontrolstand) page4/5

Software Updates page6/7

• forASTsequencecontrollerandbasestationComCenter10• forECscrewdriver,EC-Servoscrewdriverandelectricscrewdriver• formeasurementdevices• forADAPTIVEDFS• forfunctioncontrolandComCenter• forbattery,chargerandprogrammingkit• forpartfeedercontrolandpositioncontrolstand• forAST10andAST30sequencecontroller(page9)

Software solutions for DEPRAG Screwdriving Technology

Software solutions for eacy feed feeding system

• PartfeedercontrolPFCi100-integratedfunctions page3• RequiredsoftwareforpartfeedercontrolPFCi100 page3

Software solutions for DEPRAG Feeding Technology

Optional Software packages

• forDCOSProcessingandSystemControllers page8

Software solutions for DEPRAG Automation

• Softwareproductswithfunctionaldescription page10to16(sortedinascendingpartnumber)

Part number index

Description of the order process page17

2 3

Software Solutions for DEPRAG Screwdriving Technology

for ASTi6 ASTi40 330E

catalogue D3165 D3161 D3195

corresponding screwdrivers

NANOMAT-ECMICROMAT-EC

MINIMAT-EC

320Exx-..

stationary

MINIMAT-EC-Servo

311Exx-..

stationary

MINIMAT-ED Digital electric Screwdriver

330E36-..

stationary

SoftwareDAST100 Partno. 815641 815641

SoftwareDAST200 Partno. 815642 815642

Required software for sequence controllers (stationary use)

NOTE: Control and operating unit DPU.. is required here

Software for feeding systems eacy feed (stationary)

with part feeder control PFCi

Please note: Control and operating unit DPU... is required here.

Part feeder control PFCi100 (details can be found in catalogue: D3830E)

PFCi100 enables remote control, documentation and interaction with eacy feed, enabling the device to be monitored and controlled from anywhere in the world.

Integrated functions of the PFCi100»externalmasterIPC(e.g.DPU100)operationalplatform»enablesremotecontrolandcommunication»busInterface»adjustableviaIPC(DPU100)»communicationviaTCP/IP»programmableviaintegratedwebbrowser

Required software:

ConnectionPFCi-DPU050/100 Partno. 115460

ConnectionPFCi-DPU200 Partno. 115461

Software Solutions for DEPRAG Feeding Technology

4 5


Optional additional software

for AST sequence controller, ComCenter 10, MINIMAT-ED digital electric screwdriver,

ADAPTIVE DFS

NOTE: PC is needed (exceptions are marked with *)

suitable for AST5 AST5-S AST(i)6 AST10/11 AST(i)40ComCenter10

385582AAST30-31

Interface 330E106744B

ADAPTIVE DFS

according to catalogue D3490 D3496 D3165 D3165/D3490 D3161 D3710 D3497 D3195 D3880


Software

MINIMAT-EC

320EG/EW/EPx-..-..

handheld

MINIMAT-EC-Servo

325EGA22-..

handheld

NANOMAT-ECMICROMAT-ECMINIMAT-EC

320Exx-..

stationary

MINIMAT-EC

320Exx-..320EGx..-..320EWx..-..320EPx..-..stationaryhandheld

MINIMAT-EC-Servo

311Exx-..

stationary

MINIMAT-EC cordless screwdriver

318AWT-..318EPT-..

handheld

MINIMAT-EC-Servo angle head design

315EWT58-..

handheld

MINIMAT-ED digital electric screwdriver

330E36-..

stationary

-

InterfaceGraphLoader(hardwareandsoftware) Partno. 385834A 385834A 385834A 385834A 385834A - - - -

ProgrammingkitComCenterPC Partno. - - - - - 385597A - - -

GRAPH10Eactivationkey Partno. 202698 202698 202698 202698 202698 202698 - - -

Dataloggeractivationkey Partno. 202699 202699 202699 202699 202699 202699 - - -

Statisticsactivationkey Partno. 206081 206081 206081 206081 206081 206081 - - -

ASTxxserialremoteactivationkey Partno. 206565 206565 206565 206565 206565 - - - -

ASTxxTimeSync Partno. 122728 122728 122728 122728 122728 122728 - - -

AST-CSV-Import Partno. 122724 122724 122724 122724 122724 122724 - - -

GRAPH10BIN->CSV Partno. 201992 201992 201992 201992 201992 201992 - - -

PC-SoftwareTC30-PC Partno. - - - - - - 828560 - -

TC30-PCstatistics Partno. - - - - - - 828634 - -

TC30-PCdatalogger Partno. - - - - - - 829085 - -

TC30-PCtoQS-STATconversionprogram Partno. - - - - - - 830458 - -

Shut-offateffectivetorque*) Partno. - - - - - - 829613*) - -

Frictionvaluescrewdriving*) Partno. 201820 - 201820 201820 201820 - 829614*) - -

DEPRAGClampForceControl-DEPRAGCFCactivationkey Partno. - - - - 109108 - - - -

WEB-IO12E/12A*) Partno. 116995*) - - - - - - - -

GraphViewer/activationkey Partno. 128900/128901 128900/128901 128900/128901 128900/128901 128900/128901 128900/128901 - - 117360

ADFSThreadedFastener Partno. - - - - - - - - 111914

ADFSPushFastener Partno. - - - - - - - - 111915

DEPRAGDataeXchange/activationkey Partno. 132679/132680 132679/132680 132679/132680 132679/132680 132679/132680 132679/132680 - - 132679/132680

ADFSOPCUA Partno. - - - - - - - - 131142

*)noPCisrequiredforthissoftware

Optional software - activation keys

for Position control stand PKS

catalogue D3345

Activationkey:WEB-VISU-POSI Partno. 101890

hierolde

Textfeld

201820

4 5


Optional additional software

for AST sequence controller, ComCenter 10, MINIMAT-ED digital electric screwdriver,

ADAPTIVE DFS

NOTE: PC is needed (exceptions are marked with *)

suitable for AST5 AST5-S AST(i)6 AST10/11 AST(i)40ComCenter10

385582AAST30-31

Interface 330E106744B

ADAPTIVE DFS

according to catalogue D3490 D3496 D3165 D3165/D3490 D3161 D3710 D3497 D3195 D3880


Software

MINIMAT-EC

320EG/EW/EPx-..-..

handheld

MINIMAT-EC-Servo

325EGA22-..

handheld

NANOMAT-ECMICROMAT-ECMINIMAT-EC

320Exx-..

stationary

MINIMAT-EC

320Exx-..320EGx..-..320EWx..-..320EPx..-..stationaryhandheld

MINIMAT-EC-Servo

311Exx-..

stationary


318AWT-..318EPT-..

handheld

MINIMAT-EC-Servo angle head design

315EWT58-..

handheld


330E36-..

stationary

-

InterfaceGraphLoader(hardwareandsoftware) Partno. 385834A 385834A 385834A 385834A 385834A - - - -

ProgrammingkitComCenterPC Partno. - - - - - 385597A - - -

GRAPH10Eactivationkey Partno. 202698 202698 202698 202698 202698 202698 - - -

Dataloggeractivationkey Partno. 202699 202699 202699 202699 202699 202699 - - -

Statisticsactivationkey Partno. 206081 206081 206081 206081 206081 206081 - - -

ASTxxserialremoteactivationkey Partno. 206565 206565 206565 206565 206565 - - - -

ASTxxTimeSync Partno. 122728 122728 122728 122728 122728 122728 - - -

AST-CSV-Import Partno. 122724 122724 122724 122724 122724 122724 - - -

GRAPH10BIN->CSV Partno. 201992 201992 201992 201992 201992 201992 - - -

PC-SoftwareTC30-PC Partno. - - - - - - 828560 - -

TC30-PCstatistics Partno. - - - - - - 828634 - -

TC30-PCdatalogger Partno. - - - - - - 829085 - -

TC30-PCtoQS-STATconversionprogram Partno. - - - - - - 830458 - -

Shut-offateffectivetorque*) Partno. - - - - - - 829613*) - -

Frictionvaluescrewdriving*) Partno. 201820 - 201820 201820 201820 - 829614*) - -

DEPRAGClampForceControl-DEPRAGCFCactivationkey Partno. - - - - 109108 - - - -

WEB-IO12E/12A*) Partno. 116995*) - - - - - - - -

GraphViewer/activationkey Partno. 128900/128901 128900/128901 128900/128901 128900/128901 128900/128901 128900/128901 - - 117360

ADFSThreadedFastener Partno. - - - - - - - - 111914

ADFSPushFastener Partno. - - - - - - - - 111915

DEPRAGDataeXchange/activationkey Partno. 132679/132680 132679/132680 132679/132680 132679/132680 132679/132680 132679/132680 - - 132679/132680

ADFSOPCUA Partno. - - - - - - - - 131142

6 7


Software updates for AST sequence controller

UPDATE for AST5 AST5-S AST6 ASTi6 AST11 AST30-31 AST40 ASTi40

catalogue D3490 D3496 D3165 D3165 D3165/D3490 D3497 D3161 D3161

Mainunit Partno. 114268 117217 114269 114270 114271 - 114254 114261

Powerunit Partno. 114343 117236 114357 114358 114359 - - -

PowerunitDSP Partno. - - - - - - 114254 114261

PowerunitCPLD Partno. - - - - - - 114254 114261

InterfaceI/O Partno. - - 117237 117237 - - 117239 117239

Bluetoothmodule Partno. - - - - - - - -

Operatingsystem Partno. 117242 117242 117242 117242 117248 117249 117242 117242

Powerunitbootloader Partno. 117254 117254 117254 117254 - - - -

Display Partno. - - - - - 117259 114254 -

Firmware Partno. - - - - - 117262 - -

Software updates for EC and EC-Servo screwdriver, electric screwdrivers

UPDATE for screwdriver


318Axx-.. handheld

NANOMAT-EC, MICROMAT-EC, MINIMAT-EC

320E-..stationary


330E36-..stationary


330E36-..handheld

MINIMAT-E

342Ex36-..stationary

MINIMAT-EC-Servo

311Exx-..stationary

catalogue D3710 D3165 D3195 D3495 D3170 D3161

Display Partno. 117263 - - 117269 - -

Powerunit Partno. 117264 - 117267 117270 117272 -

Screwdriverlogic Partno. 117266 117238 117268 117271 - 117273

Measuringsystem Partno. - - - - - 117274

Software updates for measurement devices

UPDATE for measurement device ME5000 ME5400 ME5600 ME6000 ME6100

catalogue D3022 D3022 D3022 D3022 D3022

Partno. 117294 117295 117296 117297 117297

Software updates for ADAPTIVE DFS

UPDATE for ADAPTIVE DFS

catalogue D3880

Hardware Partno. -

PLC Partno. 117276

VISU Partno. 117278

GraphViewer Partno. 117216

Software updates for battery, charger and programming kit

UPDATE for Battery Li-Ion 36V 54Wh (833880) Charger (833881) Programming kit ComCenter PC

catalogue D3710 D3710 D3710

Partno. 117285 117284 117287

6 7

Software Solutions for DEPRAG Screwdriving TechnologySoftware Solutions for DEPRAG Screwdriving Technology

UPDATE for AST5 AST5-S AST6 ASTi6 AST11 AST30-31 AST40 ASTi40

catalogue D3490 D3496 D3165 D3165 D3165/D3490 D3497 D3161 D3161

Mainunit Partno. 114268 117217 114269 114270 114271 - 114254 114261

Powerunit Partno. 114343 117236 114357 114358 114359 - - -

PowerunitDSP Partno. - - - - - - 114254 114261

PowerunitCPLD Partno. - - - - - - 114254 114261

InterfaceI/O Partno. - - 117237 117237 - - 117239 117239

Bluetoothmodule Partno. - - - - - - - -

Operatingsystem Partno. 117242 117242 117242 117242 117248 117249 117242 117242

Powerunitbootloader Partno. 117254 117254 117254 117254 - - - -

Display Partno. - - - - - 117259 114254 -

Firmware Partno. - - - - - 117262 - -

UPDATE for screwdriver


318Axx-.. handheld

NANOMAT-EC, MICROMAT-EC, MINIMAT-EC

320E-..stationary


330E36-..stationary


330E36-..handheld

MINIMAT-E

342Ex36-..stationary

MINIMAT-EC-Servo

311Exx-..stationary

catalogue D3710 D3165 D3195 D3495 D3170 D3161

Display Partno. 117263 - - 117269 - -

Powerunit Partno. 117264 - 117267 117270 117272 -

Screwdriverlogic Partno. 117266 117238 117268 117271 - 117273

Measuringsystem Partno. - - - - - 117274

UPDATE for measurement device ME5000 ME5400 ME5600 ME6000 ME6100

catalogue D3022 D3022 D3022 D3022 D3022

Partno. 117294 117295 117296 117297 117297

Software updates for function control and ComCenter

UPDATE for fc11 fc20 ComCenter ED ComCenter 10 ComCenter PC

catalogue D3440 D3440 D3495 D3710 D3710

Mainunit Partno. 117280 117283 117234 117232 117287

Operatingsystem Partno. - - 117279 117242 -

Bluetoothmodule Partno. - - - 117241 -

Software updates for part feeder control and position control stand

UPDATE for PFC100 PFCi100 Position control stand

catalogue D3820/D3830 D3830 D3345

Control Partno. 117288 - 119657

Operatingsystem Partno. - - 117293

Controlsoftware Partno. 117290 117290 -

Webserver Partno. - 117292 -

8 9

Software Solutions for DEPRAG Automation

Optional software packages for DCOS Processing and System Controllers

forCompact controller

DPU010

Control and operating unit

DPU050


DPU100


DPU200

catalogue D3350 D3350 D3350 D3350

DFUN10 Partno. 815454 - - -

DFUN50 Partno. - 815455 - -

DFUN100 Partno. - - 815456 -

DFUN200 Partno. - - - 815457

DVIP50 Partno. - 815629 - -

DVIP100 Partno. - - 815630 -

DVIP200 Partno. - - - 815631

DPRO10 Partno. 815632 - - -

DPRO50 Partno. - 815633 - -

DPRO100 Partno. - - 815634 -

DPRO200 Partno. - - - 815635

DAST100 Partno. - 815641 815641 -

DAST200 Partno. - - - 815642

DSPEC Partno.

8 9

Software Solutions for DEPRAG Automation Software Solutions for DEPRAG Screwdriving Technology

Software update for sequence controller AST10 and AST30 (these controllers are no longer in the current sales program)

UPDATE for AST10 AST30

Mainunit Partno. 117340 -

Controlunit Partno. 117341 -

Operatingsystem Partno. 117342 117343

Display Partno. - 117344

Firmware Partno. - 117345

Do You Have Questions Concerning Our Software?

Your contact:

TobiasDirrigl: +499621/371-377ManuelHeindl: +499621/371-337HannesRiedler: +499621/371-376

Email:[email protected]

10 11

Part Number IndexPart Number Index

Part numberCat-egory

Designation Description

101890 9 WEB-VISU-POSI

Thecurrentstatusoftheprogramexecutioncanbedisplayedintheadd-onmo-dule“processvisualisation”aswellasontheoperatingterminal.ThiscanalsobeusedtomonitoranassemblyprocessfromaremotePC.

102168A - PKSsimulator(hardware)

-possibilityfordemonstrationofthemenustructure-programgeneration-displayoftheprocessvisualisation-fieldbusmodules,manuals,etc.

106744B/C - Interface330E

Theinterface330Eallowssimpleadjustmentofscrewdrivingprogrammes,recordingofresultvaluesviatheintegratedWEBserveraswellascontroloftheMINIMAT-EDspindlescrewdriver.IthasanEthernetconnectionandtwoUSBports.Allsettingscanbecarriedoutcomfortablyonthewebinterface(e.g.DPU,PC,laptop..).Seve-rallanguageoptionsareavailable.Eachscrewdriverrequiresitsowninterface330EandisreachedviaitsownindividualIPaddress.

109108 9 DEPRAGClampForceControl

ThescrewdrivingprocedureClampForceControlenablesreliablerecognitionoftheseatingof thescrew.This, incombinationwitha subsequent screwassembly todifferentialtorqueorangle,facilitatesasignificantlyimprovedconstancyoftheclampforceincomparisontotorquecontrolledtighteningprocedures.Typicalareasofap-plicationaredirectscrewassembliesinplasticsormetal.

111914 9 ADFSThreadedFastener Processsoftwareforflowformingscrews

111915 9 ADFSPushFastener Processsoftwareforflowpushelements

114254 2 Updatepackagecomplete mainunit/powerunitDSP/powerunitCPLD/display(AST40)

114261 2 Updatepackagecomplete mainunit/powerunitDSP/powerunitCPLD(ASTi40)

114268 2 Update mainunit(AST5)


114270 2 Update mainunit(ASTi6)


114343 2 Update powerunit(AST5)


114358 2 Update powerunit(ASTi6)


115460 3 ConnectionPFCi-DPU050/100 driverandvisualisationforDPU

115461 3 ConnectionPFCi-DPU200 driverandvisualisationforDPU

116995 1 WEB-IO12E/12A input/outputextensionforAST5

117216 2 Update forthegraphvieweroftheADAPTIVEDFS

117217 2 Update mainunit(AST5-S)

117232 2 Update mainunit(basestationComCenter10)

117234 2 Update mainunit(ComCenterED)

117236 2 Update powerunit(AST5-S)

117237 6 Update InterfaceI/O(AST6/ASTi6)

117238 6 Update screwdriverlogic(ECscrewdriver320E-..)

117239 6 Update InterfaceI/O(AST40/ASTi40)

117241 6 Update bluetoothmodule(basestationComCenter10)

117242 6 Update operatingsystem(AST5/AST5-S/AST6/ASTi6/AST40/ASTi40/ComCenter10)

117248 6 Update operatingsystem(AST11)

117249 2 Update operatingsystem(AST30-31)

10 11

Part Number Index

117254 6 Update powerunitbootloader(AST5/AST5-S/AST6/ASTi6)

117259 6 Update display(AST30-31)

117262 2 Update firmware(AST30-31)

117263 6 Update display(MINIMAT-ECcordlessscrewdriver,318Axx-..)

117264 6 Update powerunit(MINIMAT-ECcordlessscrewdriver,318Axx-..)

117266 6 Update screwdriverlogic(MINIMAT-ECcordlessscrewdriver,318Axx-..)

117267 2 Update powerunit(MINIMAT-EDstationary,330E36-..)

117268 2 Update screwdriverlogic(MINIMAT-EDstationary,330E36-..)

117269 6 Update display(MINIMAT-EDhandheld,330E36-..)

117270 2 Update powerunit(MINIMAT-EDhandheld,330E36-..)

117271 2 Update screwdriverlogic(MINIMAT-EDhandheld,330E36-..)

117272 6 Update powerunit(MINIMAT-Estationary,342Ex36-..)

117273 2 Update screwdriverlogic(MINIMAT-EC-Servostationary,311Exx-..)

117274 6 Update measuringsystem(MINIMAT-EC-Servostationary,311Exx-..)

117276 2 Update PLC(ADAPTIVEDFS)

117278 2 Update VISU(ADAPTIVEDFS)

117279 6 Update operatingsystem(ComCenterED)

117280 2 Update mainunit(fc11)

117283 2 Update mainunit(fc20)

117284 6 Update charger833881(MINIMAT-ECcordlessscrewdriver)

117285 6 Update batteryLi-Ion367V54Wh833880(MINIMAT-ECcordlessscrewdriver)

117287 2 Update programmingkitComCenterPC(MINIMAT-ECcordlessscrewdriver)

117288 2 Update controlPFC100

117290 2 Update controlsoftwarePFC100/PFCi100

117292 2 Update webserverPFCi100

117293 6 Update positioncontrolstand

117294 6 Update measurementdeviceME5000



117297 2 Update measurementdeviceME6000/ME6100





117344 6 Update display(AST30)

117345 2 Update firmware(AST30)



12 13

Part Number Index

117360 8Graph Viewer for ADAPTIVE DFS

ForeachscrewassemblycarriedoutwiththeADAPTIVEDEPRAGFasteningSystemthecorrespondingcurvedataisrecorded.Thisdataisstoreddi-rectlyinthesystemandcanbeviewedviatheDPU.WiththenewGraphViewerthereisnowatoolavailablewithwhichthescrewdrivingcurvescanbeanalysedoreditedonaseparateWindowsPC.

Language selection:Thereareseverallanguageoptionsavailable.Itisnotnecessarytorestartthedevicewhenswitchinglanguages.Display of processing steps:Theindividualprocessingstepsarehighlightedincolourallowingeasyevaluationofthedata.Data export:ItispossibletoexportthecurvedatatoExcel,CSVorasPDF.Zoom/scroll:Toexamineasectionmorecloselyitispossibleto“zoom”byscrollingthemousewheelordrawingasquarewithinthediagramarea.Use“scroll”toremainatthesamezoomlevelbutmovetoadifferentsection.Thebutton“zoomall”restoresthedisplaytoshowthewholescrewassembly.Youcanalsousethekeycombination[Ctrl]+[+]or[Ctrl]+[-]tozoominorout.Selection of axis description displayed:Usethedrop-downmenutosettheleftaxisdescriptionofthediagram.Theaxescanthenbemovedbytheoperator,e.g.ifcurvesareinconvenientlysuperimposed.Thecurvevaluesdonotchange.Show/hide curves:Intheright-handareaoftheprogramtherearebuttons–thecolourofeachLEDbuttoncorrespondswiththecolourofthecurve.TheLEDbuttonislabelledwiththenameofthecurve.Display of curve values:ThedisplayareaisbelowtheLEDbutton.Ifthecursormovesoverpartofthediagramthecurrentvalues(verticalline)oftheindividualcurvesaredisplayed.WhenmovingovertheLEDbuttonwiththemouse,thecorrespondingcurveishighlightedasathickerlinesothatitcanbemoreeasilyrecognised.Display of values in different units:Thevaluesareautomaticallyconvertedintotheunitsetbytheoperator.Originaldatadoesnotchange.Insert comments:Uselinesandarrowstoinsertanynumberofdescriptivecommentsonthedisplay.Insertedcommentscanbeeditedordeletedineditmode.Load files:.ffs-filescanbelinkedwiththegraphviewer.Thefilescanbeopenedbydouble-clicking,viatheopenbuttonorviadrag&drop(ifthegraphviewerisalreadyopen).ThemostrecentlyusedfilescanbeopenedusingtherightclickmenuintheWindowstaskbar.Integrated instruction manual:ThequestionmarksymbolintheupperrightcorneropenstheinstructionmanualasaPDF.



dropdownmenu

highlightedcurve

12 13


119657 2 Update PKS(positioncontrolstand)mainunit

122724 7 AST-CSV-Import Freeadd-on:Add-InforMicrosoft®Excel®foreasyimportobend-valuecsvfilesintoExcel®(downloadviawebsiteofthecontroller)

122728 7 ASTxxTime-Sync

Time synchronisation between PC and sequence controller AST (down-load via controller website)ASTxxTimeSyncisaPCsoftwaredesignedforsimplesynchronisationofdateandtimebetweenaPCandanynumberofsequencecontrollers.IfendvaluesfromasequencecontrolleranddatafromaPCneedtobelinkedwithoneanotherforfurtherevaluation,thenthedateandtimemustmatchexact-lyinorderforcorrectassignmentofthedatatotakeplace.TheprogramASTxxTimeSyncisresponsiblefortimesynchronisation.ASTxxTimeSynccanrunasabatchprogramonaserveroraPCinthenetworkandcanbeaccessedforanynumberofsequencecontrollers.Thesoftwarerunsinthebackground,establishesthedateandtimeofthePConwhichitisrunningandtransmitsthesevaluestothespecifiedsequencecontroller.ThesequencecontrollertypeandIPaddressmustbespecifiedinordertoaccesstheprogram.Theuseofthissoftwareisfreeofcharge.

125134 7 DEPRAGDatalogger

Thesoftware„Datalogger“offersthepossibilitytorecordandarchivethefinal-va-luesofupto10sequencecontrollers.Thisstorageformatcorrespondswiththerequiredformatofthesoftware„Statistics“,sothatthedatasetscanbeanalyzedwith thesoftware„Statistics“. Itcanbeselectedwhether thedata iscollectedautomaticallywhiletheprogramisrunning,orwhetherthedatareadingshouldbetriggeredmanually.TheconnectiontothecontrollersisdonebyEthernetandTCP/IP.Thesoftwareisavailableinseveraldifferentlanguages.

125135 7 ASTxxSerialRemote

Forthesimplestorageofscrewdrivingcurvesandresult-datatoaPCThepro-gramASTxxSerialRemoteisstartedonaPCandiscontrolledbycommandsoveraserial interface(COM-Port).Withthisprogram,screwdrivingcurvesandresult-datacanbetransferredfastandsimplyontoaPC.ThePLCcontrolswhenandwhichdatashouldbestored.Thestorageplace(alsothedirectory)onthePCisdeterminedbythePLCaswell.ThedirectoryissetupautomaticallyonthePC.



14 15

Part Number Index

128900 2-a GraphViewer

SoftwareDEPRAGGraphViewerforevaluationofscrewdrivingcurves.DuringeachscrewassemblywhenusingasequencecontrollerAST,therelevantmeas-urement valuesare recorded in a file. There is nowanewsoftwareproduct:theDEPRAGGraphViewer, to simply and easily evaluate and analyse thesemeasurementvalues.Softwaredisplay:TheGraphVieweropensthecurvefilesofeachsequencecontrollerandcandisplaythefollowingvisualisations:1.Measurementvaluesovertime2.Measurementvaluesoverangle3.Superpositionofmeasurementvaluesovertime4.SuperpositionofmeasurementvaluesoverangleSummaryofsoftwarefunctions:-SimplefilteringandsynchronisationinsearchhistoryScrewdrivingcurvescanbefilteredaccordingtoprogramsteporbytorque.Alldisplayedcurvescanbecoordinatedtoonesynchronisationpoint.

-EasyoperationTherequiredunits,sizesandcontentscanbeflexiblyselectedbytheuser.

-SeveraldisplayviewsatonetimeInordertocompareseveralcurves,morethanonescrewdrivingcurvecanbeopenedatthesametime.

-Usability&“touchfirst”Thenewsoftwarehasbeendevelopedtobe“touchfirst”andallowseasyoperation–withoutmouseorkeyboard.

128901 9 Activationkey ActivationkeyforGraphViewer128900

131142 9 ADFSOPCUA

OPCUAisacollectionofstandardsforcommunicationanddataexchangeinthefieldofindustrialautomation.OPCUAisusedtodescribethetransportationofmachine-to-machinedataaswellasinterfacesanddata.TheADAPTIVEDFSOPCUAsoftwareenablescustomerstoretrieveendvalues,statusandsysteminformation.TheOPCUAsoftwareprovidesthebasisfortherealisationofcontentrelevanttoIndustry4.0andrepresentsauniquesellingpointoftheADAPTIVEDFS.

132679 2a DepragDataeXchange

All screw assembly data created using ADAPTIVE DFS, AST controllers andtheComCenterissavedinadistinctiveDEPRAGformatandcontainsallscrewcurves, end values anddetails relating to the screwdrivingprocess. Thedatadesignated as “graphic files”were only readable byDEPRAG’s own softwaresolutions.Inordertouseandanalysethisdatainothersystemsitisnecessarytotransformtheinternalformatintoauniversalmachine-readableformat.ThenewsoftwaresolutionnowenablesDEPRAGgraphicfilestobeexportedeitherascsvorExcelfiles.

Thecustomernowalsohastheoptionofusingthisdatainothersoftwaresolu-tions.Optionalareasofapplicationinclude:-integrationinadatabank-analysisinMatlab-SAPintegration-filinginacustomer-specificprocessingsoftware

Compatibility:allWindowssystems(7,8,10)withoutanyneedforconfiguration.Thesoftwareconfiguresitselfandisreadytorunwithjustoneclick.

132680 9 Activationkey ActivationkeyforDepragDataeXchange132679



14 15


201820 9 SoftwareFrictionvaluescrewdrivingWiththefriction-valueprocess,itispossibletomeasureandcompensatevaryingfriction-values(e.g.onself-formingscrew-joints).Additionally,thisprocedurecanbeusedformonitoringofpredeterminedfrictionvaluesatverificationprocesses.

201992 8 GRAPH10BIN->CSV Thesoftwareconvertsyourbinaryfilesintocsvfilesforfurtherprocessing.

202698 9 GRAPH10Eactivationkey CurveoverlayGRAPH10

202699 9 Dataloggeractivationkey

Thesoftware„Datalogger“offersthepossibilitytorecordandarchivethefinal-va-luesofupto10sequencecontrollers.Thisstorageformatcorrespondswiththerequiredformatofthesoftware„Statistics“,sothatthedatasetscanbeanalyzedwith thesoftware„Statistics“. Itcanbeselectedwhether thedata iscollectedautomaticallywhiletheprogramisrunning,orwhetherthedatareadingshouldbetriggeredmanually.TheconnectiontothecontrollersisdonebyEthernetandTCP/IP.Thesoftwareisavailableinseveraldifferentlanguages.

206081 9 Statisticsactivationkey

Thesoftware„statistics“offersthepossibilitytoproducestatisticalevaluationsforthescrewdrivingresults,thataremadeavailablebythesoftware„datalogger“.Inordertobeabletousethesoftware„Statistics“,thesoftware„datalogger”mustbeinstalledaswell!

206565 9 ASTxxSerialRemote(activationkey)

TheprogramASTxxSerialRemoteisstartedonaPCandiscontrolledbycom-mandsoveraserialinterface(COM-Port).Withthisprogram,screwdrivingcurvesandresult-datacanbetransferredfastandsimplyontoaPC.ThePLCcontrolswhenandwhichdatashouldbestored.Thestorageplace(alsothedirectory)onthePCisdeterminedbythePLCaswell.ThedirectoryissetupautomaticallyonthePC.

385834A -InterfaceGraphLoader(hardwareandsoftware)

Thestorageofscrewdrivinggraphsandendvaluedatasets(e.g.torque,angleetc.)formanualworkstationsandscrewdrivingstationscanbecarriedoutauto-maticallyusingtheInterfaceGraph-Loader.Thecorrespondingsoftwareenablesimmediatedisplayonthecomputerscreenofthecurrentscrewdrivinggraph,thescrewassemblycanbeevaluatedstraightaftercompletionand*csvand*binfilescanbesavedinindividualdirectories.

385582A - BasestationComCenter10

Thebase stationComCenter 10 is used togenerate andadjust screwdrivingprogramsandenablesdocumentationofresultsdataviatheintegratedwebser-ver.IthasanEthernetandBluetoothportandcanbeoptionallyequippedwithaFieldbusport.ThebasestationComCenter10hasatouchscreendisplayandcanbeoperatedvia theweb interface.This isavailable in12 languages.Thetouchscreendisplaycanbeusedtoshowscrewassemblyresultsandstatusmessages.Thescrewassembliescanbeevaluatedusingstatisticsandgraphs.Uptofourscrewdrivingtoolsatatimecanbemanagedbyonebasestation.



16 17

Part Number Index



385597A -ProgrammingkitComCenterPC

ComCenterPCisthenameofthesoftwareusedtoadjustparametersontheECcordlessscrewdriversindependentlytothebasestationComCenter10.Theli-cencekeyforthesoftwareissavedontheBluetoothadaptorandaactivationkeyisalsoprovided.ThesettingsonasmanyECcordlessscrewdriversasrequiredcanbemanagedusingtheComCenterPCsoftware,justselectthescrewdriverrequiredwhenstartingthesoftware.Range of functionsScrewdrivingprogramscanbegeneratedandadjustedusingtheComCenterPCsoftware.GraphscanbedisplayedandtransferredusingthesoftwaremoduleGraph10(E).ThisisincludedandautomaticallyinstalledwiththeComCenterPCsoftware.AllsettingsfortheECcordlessscrewdriverscanalsobemanagedviathemenusonthewebinterfaceofthebasestationComCenter10.Thereare12languagesavailablefortheComCenterPCsoftwareandfortheuserinterfaceofthebasestationComCenter10.

815454 3

SoftwarepackagesDFUNThebasicsoftwarepackageregulatesthefunctionsofyoursystemcomponents.Thefunctionalitymatchestheperformancecapabilityoftherelevantsystemcon-trol.

815455 3

815456 3

815457 3

815629 3

SoftwarepackagesDVIP

Thesoftwarepackageforvisualisationandpositioning.Operatorguidanceonthepositioningcontrolnecessitatesprocessingandsequencingvisualisation.Thefunctionalitymatchestheperformancecapabilityoftherelevantsystemcon-trol.

815630 3

815631 3

815632 3

SoftwarepackagesDPROThis software package supports the process control throughBDE,MDE andMESconnections.Thefunctionalitymatchestheperformancecapabilityof therelevantsystemcontrol.

815633 3

815634 3

815635 3

815641 3

SoftwarepackagesDAST

Thesoftware-panelforECandECServoSystems.DASTisusedtosupervisetheoperationandvisualisationof thescrewdriversequencecontroller (ASTseries)throughthesystemcontrol.Thefunctionalitymatchestheperformancecapabilityoftherelevantsystemcontrol.815642 3

828560 8 PCsoftwareTC30-PC Softwareforgeneratingofthescrewdrivingprogram

828634 8 AST30statisticsStatisticssoftwareforevaluationofthescrewdrivingdataandcalculationofave-ragevalue,standarddeviationandcmkvalue.Forthegraphicdisplayseveralalternativesmaybeselected.

829085 8 TC30-PCdatalogger Forstoringscrewdrivingdataofupto32screwdrivercontrollersinonefile.ThiscanbehandledfurtherbyMS-ExcelorAST30-statistics-software.

829613 8 Extension Shut-offateffectivetorque

829614 8 Extension Frictioncontrolledfasteningtotorque

830458 8 TC30-PCtoQS-STAT Conversionprogram

832380 7 AST10-GRAPH10 GRAPH10

Category What do we need from our customer? What do we deliver? fee required

1Purchaseorder/POandautomaticallyge-neratednumber(generatedbythecontroller)

Activationkey(viaE-Mail) no

2 Purchaseorder/PO Downloadlink(printedontheinvoice) yes

2-a Purchaseorder/PO

Downloadlink(printedontheinvoice)-Thesoftwareisfree,theinvoicewillonlybecreatedwhenthesoftwareisactivated(theactivationkeyalwayshasoneseparateordernumber)

yeswhenactivated

3

Purchaseorder/POonlyforin-houseprojects(specialmachines):Partno.mustbecapturedinternallyinthecustomersorder

InstalledbyDEPRAG yes

6Purchaseorder/PO,installationonlypossibleatDEPRAG-thecustomerhastosendthehardwaretoAmberg

Returnofthehardwarewithinstalledsoftware yes

7

a)Softwarealreadystoredoncontrol-mustbeinstalledbythecustomerb)Softwarenotstoredoncontrol-mustberequiredbythecustomer

a)-

b)Downloadlinkno

8 Purchaseorder/PO Deliveryondatamedium(e.g.CD) yes

9

Independent of a special machines project:Purchaseorder/POandautomaticallyge-neratednumber(generatedbythecontroller)

Activationkey(viaE-Mail) yes

As part of a special machines project:Purchaseorder/PO

ActivationalreadydonebyDEPRAG yes

16 17

The Order Process

18 19

Notes

Your global partner for screwdriving technology, feeding technology and automation

More information: www.deprag.com D

3900

E 0

1.20

19

deprag schulz gmbh u. co - depragusa.com · interface i/o part no. - - 117237 117237 - - 117239...

Documents