depth measuring in- struments depth micrometer … measuring in-struments depth micrometer page 223...
TRANSCRIPT
Depth Measuring In-struments
Depth MicrometerPage 223
Depth GaugePage 226
Depth Gauge AccessoriesPage 233
222 The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
Depth MicrometerSpecifications
Scale thimble and sleeve satin chrome finish, ø 18 mm
Measuring span 25 mmSpindle pitch 0,5 mm with spindle lockMicrometer Head Feed (0-25 mm)
±3 µm
Flatness of reference surface (base)
1,3 µm (63,5 mm)2 µm (101,6 mm)
Flatness of measuring face (rod)
0.3 µm
Parallelism between measuring face (rod) and reference surface (base)
(4+L/50) µm L=max. measuring length (mm)
Measuring surfaces Hardened, precision ground, micro-lap finish
Base Hardened tool steelMeasuring force 5-10 NGraduation 0.01 mmDelivered Including box and key
Series 128
This micrometer allows you to measure depth and offers you the following features:• ø4mm measuring rod.• Ratchet stop provides you with constant measuring force.• Measuring rod lock.• Carbide-tipped measuring rod model is available.
128-101
Metric
No.Range[mm]
Base (W x T)Mass[g]
128-101 0-25 63,5 x 16 mm 200128-102 0-25 101,6 x 16 mm 250
Metric Carbide-tipped measuring rod
No.Range[mm]
Base (W x T)Mass[g]
128-103 0-25 63,5 x 16 mm 200128-104 0-25 101,6 x 16 mm 250
The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
223
Digimatic Depth Micrometer with Interchangeable Rods
Series 329
This interchangeable rod type micrometer can be used for wide range measurements.It offers you the following benefits:• ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range
measurement• The ratchet stop provides constant measuring force.• Measuring rod lock.
329-250-10
Metric
No.Range[mm]
Base (W x T) Number of rodsMass[g]
329-250-10 0-150 101,6 x 16 mm 6 540329-251-10 0-300 101,6 x 16 mm 12 790
ø18.
3
ø4
101.
6
18 3.5 47.2 2.3 3 60.9 17A
mm
A = Range
Functions Series 329ZERO/ABSDATA/HOLDLock functionAuto Power OFFafter 20 min. non use2 x PRESETLow voltage alarmData output
Specifications
Scale Thimble and sleeve satin chrome finish, ø18 mm
Measuring span 25 mmSpindle pitch 0,5 mm with spindle lockZero point errors of rods ±4 µm (0-150 mm)
±6 µm (0-300 mm)Micrometer Head Feed (0-25 mm) (excluding quantizing error)
±3 µm
Flatness of reference surface (base)
2 µm
Flatness of measuring face (rod)
0.3 µm
Parallelism between measuring face (rod) and reference surface (base)
(4+L/50) µmL = max. measuring length (mm)
Measuring surfaces Hardened, precision ground, micro-lap finish
Base Hardened tool steelMeasuring force 5-10 NDigital step 0,001 mmBattery life approx. 1.2 yearsDelivered Including box, key and 1
battery
Optional accessories
No. Description05CZA662 Digimatic cable with data switch (1 m)05CZA663 Digimatic cable with data switch (2 m)
02AZD790B Connecting cable U-Wave with data switch
06ADV380B USB Input Tool Direct cable with data switch (2 m)
Consumable spares
No. Description938882 Battery SR44
224 The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
Depth Micrometer with Interchangeable RodsSpecifications
Scale Thimble and sleeve satin chrome finish ø18 mm
Measuring span 25 mmSpindle pitch 0,5 mm, with spindle lockMicrometer Head Feed (0-25 mm)
±3 µm
Zero point errors of rods
±4 µm (0-150 mm)±6 µm (0-300 mm)
Flatness of reference surface (base)
1,3 µm for 63,5 mm2 µm for 101,6 mm
Flatness of measuring face (rod)
0.3 µm
Parallelism between measuring face (rod) and reference surface (base)
(4+ L/50) µm L=max. measuring length (mm)
Measuring surfaces Hardened, precision ground, micro-lap finish
Base Hardened tool steelMeasuring force 5-10 NGraduation 0.01 mmDelivered Including box and key
Series 129
This interchangeable rod type micrometer can be used for wide range measurements.It offers you the following benefits:• ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range
measurement• The ratchet stop provides constant measuring force.• Measuring rod lock.
129-112
Metric Base 101,6 x 16 mm
No.Range[mm]
Number of rodsMass[g]
129-155 0-25 290129-113 0-50 2 310129-114 0-75 3 330129-115 0-100 4 355129-116 0-150 6 410129-153 0-300 12 640
Metric Base 63,5 x 16 mm
No.Range[mm]
Number of rodsMass[g]
129-154 0-25 240129-109 0-50 2 260129-110 0-75 3 280129-111 0-100 4 310129-112 0-150 6 370129-152 0-300 12 600
mm
A
ø18.
3
65.4 17318
ø4
101.
6
A = Range
The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
225
ABSOLUTE Digimatic Depth Gauge
Series 571
This is a standard model depth gauge that lets you take accurate measurements.It offers you the following benefits:• ABSOLUTE System gives you reliable measurements.• Its base and measuring faces are hardened and micro-lapped for robustness.• Large character height of 9mm makes measurements easy to read.• Exceptional battery life.
571-201-20
Metric
No.Range[mm]
AccuracyL
[mm]Base (W x T)
Mass[g]
571-201-20 0-150 ±0,02 mm 237 100 x 6 mm 207571-202-20 0-200 ±0,02 mm 287 100 x 6 mm 227571-203-20 0-300 ±0,03 mm 403 100 x 6 mm 257571-204-10 0-450 ±0,05 mm 635 250 x 10 mm 1270571-205-10 0-600 ±0,05 mm 785 250 x 10 mm 1400571-206-10 0-750 ±0,06 mm 935 250 x 10 mm 1530571-207-10 0-1000 ±0,07 mm 1200 250 x 10 mm 1760
Over 300 mm range models
Functions Series 571ORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarmData output
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Max. response speed
Unlimited
Repeatability 0.01 mmDigital step 0,01 mmDisplay LCD; character height 9 mm
(150/200/300 mm), 10 mm (> 300 mm)
Battery life approx. 20.000 hoursDelivered In a case (450/1000 mm)
including 1 battery
Optional accessories
No. Description959149 Digimatic cable with data switch (1 m)959150 Digimatic cable with data switch (2 m)
02AZD790C U-WAVE Data Cable with data switch06ADV380C USB Input tool Direct cable with data
switch (2 m)959143 Data-hold unit900370 Base length 180
for range up to 300Thickness 8
900371 Base length 260for range up to 300Thickness 8
900372 Base length 320for range up to 300Thickness 8
Consumable spares
No. Description938882 Battery SR44
L
73.5
10
0
2-ø5
5
10
7
20
70
16
Up to 300 mm range models
226 The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
ABSOLUTE Digimatic Depth GaugeFunctions Series 571ORIGIN (ABS-Zero)Auto Power OFFafter 20 min. non useLow voltage alarmData output
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Max. response speed
Unlimited
Repeatability 0.01 mmDigital step 0,01 mmDisplay LCD, Character Height 7.5 mm
(150, 200 mm) 10,2 mm (300 mm)Battery life approx. 15.000 hours (150, 200
mm) 5.000 hours (300 mm)Delivered In a case including 1 battery
Optional accessories
No. Description05CZA624 Digimatic cable with data switch (1 m)05CZA625 Digimatic cable with data switch (2 m)
02AZD790A Connecting cable U-Wave with data switch
06ADV380A USB Input Tool Direct cable (2 m)900370 Base length 180
for range up to 300Thickness 8
900371 Base length 260for range up to 300Thickness 8
900372 Base length 320for range up to 300Thickness 8
Consumable spares
No. Description938882 Battery SR44
Interchangeable base
Bore depth gauges
ScrewWasher
Mounting the interchangeable base
Series 571
This depth gauge is IP67 coolant proof and offers you the following benefits:• ABSOLUTE System gives you reliable measurements.• Its base and measuring faces are hardened and micro-lapped for
robustness.• It has excellent resistance against water and dust (IP67 protection
level) enabling you to use it in machining situations that include splashing coolant fluid.
• Extremely resistant to both coolants and lubricants.
571-251-10
Metric
No.Range[mm]
AccuracyL
[mm]Base (W x T)
Mass[g]
571-251-10 0-150 ±0,02 mm 237 100x 6 mm 199571-252-10 0-200 ±0,02 mm 287 100 x 6 mm 219571-253-10 0-300 ±0,03 mm 404 100 x 6.3 mm 357
Range : 0-150 mm, 0-200 mm
Range : 0-300 mm
The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
227
ABSOLUTE Digimatic Depth Gauge IP67 Hook/Pin Type
Series 571
• Direct reading for either measuring surface is obtained by press-ing the OFFSET function, which compensates for the 10 mm width of the hook.
• The ABSOLUTE feature of this gauge keeps track of the origin point (once set) for the entire life of the battery.
571-255-10
571-301-10
Metric Hook Type
No.Depthrange
Hookrange
Base (W x T)L
[mm]Mass[g]
571-254-10 10-160 mm 0-150 mm 100 x 6 mm 247 216571-255-10 10-210 mm 0-200 mm 100 x 6 mm 297 236
Metric Pin Type
No.Range[mm]
Base (W x T)L
[mm]Mass[g]
571-301-10 0-150 100 x 6 mm 237 207571-302-10 0-200 100 x 6 mm 287 227
10
7
26100
10
70
16
2-ø5 L
(57.5)
(41.
3)
mm
7
10
0
70
16
2-ø5L
(57.5)
(41
.3)
67 4
Ø 1
,9
Series 571
Functions 571-
254-
1057
1-25
5-10
571-
301-
1057
1-30
2-10
ORIGIN (ABS-Zero)OFFSETAuto Power OFFafter 20 min. non useLow voltage alarmData output
Specifications
Accuracy ±0,03 mm(excluding quantizing error)
Max. response speed UnlimitedRepeatability 0.01 mmDigital step 0,01 mmDisplay LCD, Character Height 7.5 mmBattery life approx. 15.000 hoursDelivered In a case including 1 battery
Optional accessories
No. Description05CZA624 Digimatic cable with data switch (1 m)05CZA625 Digimatic cable with data switch (2 m)
02AZD790A Connecting cable U-Wave with data switch
06ADV380A USB Input Tool Direct cable (2 m)900370 Base length 180
for range up to 300Thickness 8
900371 Base length 260for range up to 300Thickness 8
900372 Base length 320for range up to 300Thickness 8
Consumable spares
No. Description938882 Battery SR44
Mounting the interchangeable base
228 The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
Vernier Depth GaugeSpecifications
Accuracy Refer to the list of specifications
Optional accessories
No. Description900370 Base length 180
for range up to 300Thickness 8
900371 Base length 260for range up to 300Thickness 8
900372 Base length 320for range up to 300Thickness 8
10
7
70
20
L
10
0
4
70
16
34
.5
Ø 5
11
Up to 300 mm range models
Mounting the interchangeable base
Series 527
This vernier depth gauge offers you the following benefits:• Its base and measuring faces are hardened and micro-lapped for robustness.• Fine adjustment models are available.
527-101
Metric
No.Range[mm]
Graduation Accuracy Base (W x T)L
[mm]Mass[g]
527-201 0-150 0.05 mm ±0,05 mm 100 x 6.5 mm 260 240527-121 0-150 0.02 mm ±0,03 mm 100 x 6.5 mm 260 215527-202 0-200 0.05 mm ±0,05 mm 100 x 6.5mm 310 260527-122 0-200 0.02 mm ±0,03 mm 100 x 6.5mm 310 230527-203 0-300 0.05 mm ±0,08 mm 100 x 6.5 mm 410 300527-123 0-300 0.02 mm ±0,04 mm 100 x 6.5mm 410 265527-204 0-600 0.05 mm ±0,10 mm 250 x 10 mm 800 1510527-205 0-1,000 0.05 mm ±0,15 mm 250 x 10mm 1200 1880
Metric With fine adjustment
No.Range[mm]
Graduation Accuracy Base (W x T)L
[mm]Mass[g]
527-101 0-150 0.02 mm ±0,03 mm 100 x 6.5mm 260 280527-102 0-200 0.02 mm ±0,03 mm 100 x 6.5mm 310 300527-103 0-300 0.02 mm ±0,04 mm 100 x 6.5mm 410 350527-104 0-600 0.02 mm ±0,05 mm 250 x 10mm 800 1510527-105 0-1,000 0.02 mm ±0,07 mm 250 x 10mm 1200 1880
Over 300 mm range models
The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
229
Vernier Depth Gauge Hook Type
Series 527
This hook type vernier depth gauge offers you the following benefits:• The end of the beam is hook-shaped so you can take depth and thickness measurements of a
projected portion or lip in a hole, as well as standard depth measurements.• Fine adjustment models are available.
527-401
Metric
No.Depthrange
Hookrange
Graduation AccuracyL
[mm]Mass[g]
527-401 10-150 mm 0-150 mm 0.05 mm ±0,05 mm 260 240527-402 10-200 mm 0-200 mm 0.05 mm ±0,05 mm 310 240527-403 10-300 mm 0-300 mm 0.05 mm ±0,08 mm 410 270
Metric With fine adjustment
No.Depthrange
Hookrange
Graduation AccuracyL
[mm]Mass[g]
527-411 10-150 mm 0-150 mm 0.02 mm ±0,03 mm 260 280527-412 10-200 mm 0-200 mm 0.02 mm ±0,03 mm 310 300527-413 10-300 mm 0-300 mm 0.02 mm ±0,04 mm 410 350
2110
0
10
9.5
L
Ø 5
11
L1 = depth-vernier reading / L2 = hook-vernier reading / L3 = (depth-vernier reading) - (hook-vernier reading)
Specifications
Accuracy Refer to the list of specifications
Optional accessories
No. Description900370 Base length 180
for range up to 300Thickness 8
900371 Base length 260for range up to 300Thickness 8
900372 Base length 320for range up to 300Thickness 8
Interchangeable base
Bore depth gauges
ScrewWasher
Mounting the interchangeable base
230 The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
Dial Depth GaugeSpecifications
Accuracy Refer to the list of specificationsGraduation 0.05 mmBase size 100 x 6,5 mm (W x T) mm
Optional accessories
No. Description900370 Base length 180
for range up to 300Thickness 8
900371 Base length 260for range up to 300Thickness 8
900372 Base length 320for range up to 300Thickness 8
Interchangeable base
Bore depth gauges
ScrewWasher
Mounting the interchangeable base
Series 527
This dial depth gauge offers you the following benefits:• The dial is very easy-to-read.• Its base and measuring faces are hardened and micro-lapped for robustness.• You can make fine adjustments.
527-301-50
Metric
No.Range[mm]
AccuracyL
[mm]Mass[g]
527-301-50 0-150 ±0,05 mm 260 280527-302-50 0-200 ±0,05 mm 310 300527-303-50 0-300 ±0,08 mm 410 340
10
7
10
0
70
70
20
L
2 Ø 5
4
11
34
.5
16
The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
231
Tyre Tread Depth Gauge
Series 571
This is designed to measure tyre tread depth and offers you the following benefits:• The ABSOLUTE feature of this gauge keeps track of the origin point (once set)
for the entire life of the battery.• It gives you SPC data output.
571-100MOT-10
87.2
(60) 16
(3.5
)
ø30.8
ø3
mm
Metric
No.Range[mm]
AccuracyMass[g]
571-100MOT-10 0-25 ±0,02 mm 160
Functions Series 571ORIGIN (ABS-Zero)ZERO/ABSON/OFFAuto Power OFFafter 20 min. non useLow voltage alarmData output
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Max. response speed unlimitedRepeatability 0.01 mmDigital step 0,01 mmDisplay LCD, Character height 7,5 mmBattery life approx. 20.000 hoursDelivered Including 1 battery
Optional accessories
No. Description959149 Digimatic cable with data switch (1 m)959150 Digimatic cable with data switch (2 m)
02AZD790C U-WAVE Data Cable with data switch06ADV380C USB Input tool Direct cable with data
switch (2 m)959143 Data-hold unit
Consumable spares
No. Description938882 Battery SR44
Series 700
• Specially designed to measure tyre tread depth.• Plastic construction for lightweight use.
700-104
mm
2960
11383
164
4.3
ø1.5
ø3
13
25
10
Metric
No. Range AccuracyMass[g]
700-104 0-25 mm ±0,2 mm 50
Functions Series 700ZEROON/OFFLow voltage alarm
Specifications
Accuracy Refer to the list of specifications(excluding quantizing error)
Digital step 0,1 mmDelivered Including 1 battery
Consumable spares
No. Description938882 Battery SR44
232 The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
Optional Accessories for Depth Gauge
Attaching the extension base
Extension bases
These optional extension bases can be fitted to depth gauge models up to 0-300mm range.They cannot be attached to 0-600mm or 0-1000mm range models.
900372
Metric
No.L
[mm]A
[mm]B
[mm]Number of holes
Mass[g]
900370 180 70 55 2 200900371 260 35 60 5 270900372 320 70 55 4 345
L
B A
17
7
A BA
R5 R5
n–M4×P=0.7
The prices listed are suggested retail prices (valid until 31st May 2014). All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
233