24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 1/10

Cerrar SIS

Pantalla anterior

Producto: WHEEL LOADERModelo: 950H WHEEL LOADER M1G00392Configuración: 950H Wheel Loader M1G00001-UP (MACHINE)POWERED BY C7 Engine

Desarmado y Armado IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine SystemsNúmero de medio -RENR8881-01 Fecha de publicación -01/06/2009 Fecha de actualización -08/06/2009

i02857532

Control Manifold (Brake Charge) (Hydraulic Fan Control) -Disassemble

SMCS - 5264-015-BRK; 5264-015-HFN

Disassembly Procedure

Start By:

A. Remove the control manifold. Refer to Disassembly and Assembly, "Control Manifold (Brake Charge)

(Hydraulic Fan Control) - Remove".

Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the componentshould be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 2/10

Illustration 1 g01424140

1. Remove cartridge assembly (1) , spring washer (2) , and coil assembly (3) .

2. Remove relief valve (4) , and diverter valve (5) .

Illustration 2 g01152940

3. Remove O-ring seals (8) and backup rings (9) from relief valve (4) .

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 3/10

Illustration 3 g01424265

4. Remove O-ring seals (10) and backup rings (11) from diverter valve (5) .

Illustration 4 g01424166

5. Remove plugs (12) , (13) and (15) . Remove shuttle valve (14) .

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 4/10

Illustration 5 g01424266

6. Remove O-ring seal (17) from plug (13) .

7. Remove O-ring seal (16) from plug (12) .

8. Remove O-ring seal and backup ring from shuttle valve (16) .

Illustration 6 g01424284

9. Remove plug (18) . Remove shuttle valve (19) . Remove plug (12) . Remove check valve (21) .

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 5/10

Illustration 7 g01424290

10. Remove O-ring seal (23) from plug (18) .

Illustration 8 g01424295

11. Remove O-ring seals (24) and backup rings (25) from shuttle valve (19) .

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 6/10

Illustration 9 g01424296

12. Remove O-ring seal (16) from plug (12) .

Illustration 10 g01424297

13. Remove O-ring seals (26) and backup ring (27) from relief valve (21) .

Illustration 11 g01424298

14. Remove screen (22) . Remove plugs (12) .

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 7/10

Illustration 12 g01424296

15. Remove O-ring (16) from plug (12) .

Illustration 13 g01424311

16. Remove check valves (18) . Remove plug (12) .

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 8/10

Illustration 14 g01424296

17. Remove O-ring (16) from plug (12) .

Illustration 15 g01424290

18. Remove O-ring seal (23) from plug (18) .

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/si… 9/10

Illustration 16 g01424317

19. Remove diverter valve (28) . Remove plug (12) .

Illustration 17 g01424346

20. Remove O-ring seals (29) , and backup rings (30) from diverter valve (28) .

24/06/13 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 41) - Documentación

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/… 10/10

Illustration 18 g01424296

21. Remove O-ring (16) from plug (12) .

Copyright 1993 - 2013 Caterpillar Inc.Todos los derechos reservados.Red privada para licenciados del SIS.

Mon Jun 24 2013 20:59:39 GMT-0500 (Hora est. Pacífico, Sudamérica)