description item model optical wireless …...outdoor housing housing including a sighting device,...
TRANSCRIPT
Outdoor Housing
Housing including a sighting device, useful for optical axis adjustment of the Optical wireless communication unit.
Model: HDW2A
External Dimensions: Width 217.7 × Depth 300.5 × Height 111.0 mm 3,740 g, IP66
Angle Adjustment Plate
Fine adjustment of up/down, right/left positioning is possible, enabling easy optical axis adjustment.
Peripheral Units (Handled by TAIYO YUDEN)
Model: MBA1
External Dimensions: Width 144.4 × Depth 179.2 × Height 33 mm 1,040 g
Combined with the Housing
ItemModelOperating environmentInterfaceCommunication speedCommunication distanceCommunication methodLight-emitting deviceDirectionalityLight-receiving deviceOperating ambient temperatureOperating ambient humidityProtective structure
Operating ambient illuminance
Connection
Consumption current
Source voltage
External dimensionsWeight
DescriptionSOT-TS100AIEEE802.3u (Ethernet)100BASE-TXCable: 100 MbpsMin. 20 m Max. 100 mFull-duplex bidirectionalInfrared LED (Emission wavelength: 860 nm)1°APD-10 to 50 °C. No frost.10 to 85%RH. No condensation.IP40Sunlight: 10,000 lx or less Fluorescent light, incandescent light bulb: 3,000 lx or lessThe light-receiving device shall not be exposed directly to sunlight or ambient light.For signals: RJ-45 modular jackFor power supply: 4-pole connector (e-CON-compatible)Conversion adapter for power plug included.(PL03B plug 4-pole connector)320 mA or less (when 12 VDC is input)12 VDC or 24 VDC (Power supply ripple: within 10%)Peak voltage: within 26 V including ripples Width 81.6 mm × Depth 119 mm × Height 50.5 mm (including protruded parts)Approx. 200 g (main unit only)
Third major means of communication after wired and radio communications
Optical wireless communication unitSOT-TS100A
■ Optical space transmission of Ethernet
■ 100 Mbps full-duplex bidirectional communication with a communication distance of 100 m
■ Stable communication immune to jamming and noise interference
■ Meets communication needs that cannot be covered by conventional wired and wireless communication
Major specifications * Two optical wireless communication units (SOT-TS100A) are required for communication.
太陽誘電_光無線おもて 校了
• Security camera
Security camera
Security camera
Optical wirelesscommunicationunit
Optical wirelesscommunicationunit
Optical wirelesscommunicationunit
Optical wirelesscommunicationunit
Security camera
Security camera
• Optical wireless communication unit
•Optical wireless communication unit
Public toilet
Parking
AdminBldg
To Kawasaki Station
Nakamisedori Shopping Street
Optical Wireless Communication* Optical wireless communication refers to wireless communication that uses pulses of light.
■ Four features of optical wireless communication ■ Easily adjustable in 5 steps
* For outdoor use, an IP65 or better housing is required.■ Communication immune to weather changes
■ Comparison with the other communication methods
Enables one-to-one wireless communication where cables cannot be laid.
Does not interfere with radio waves. Not subject to radio noise interference.
Easy to install, remove, and reinstall, contributing to cost reduction.
No communications fees.
1
2
3
4
The optical axis can easily be adjusted with tools.
■ Actual installationsTakasaki City Jonan Multilevel Car Parking Tower Nakamisedori Shopping Street in front of Kawasaki Station
・Use for communication across a road ・Surveillance camera relay network across a road・Use in an area where there are many people and jamming easily occurs
STEP
1STEP
2STEP
3STEP
4STEP
5
Communication possible even in torrential rainCommunication is possible even in rain of 300 mm/h.(Tested in a rain test chamber)
Communication possible even when a dense fog advisory is issuedCommunication is possible even in dense fog with a visibility of 40 m or so (when the communication distance is 100 m). (Tested in a fog test chamber)
Communication possible even in the scorching sunCommunication is possible without problems as long as the light-emitting and receiving parts are not directly exposed to sunlight or reflected light.
Form of communication
Communication speed
Installation cost
Jamming/noise interferenceMaintenance of appearance ofinstallation environment
Subject to Radio Act
Installation
Confidentiality
○ Constant
○ Low
○ Not affected
○ Easy
○ No
○ Easy
○ High
Optical wireless communication
○×△×○×○
Constant
The longer the communication distance is, the higher the cost is.
Affected by noise
Difficult
No
Difficult
High
Wired communication
×○×○×○×
Not constant
Low
Jamming occurs.
Easy
Yes
Easy
Low
Radio wireless communication
Roughly adjust the position and angle.
■ Application examples
Finely adjust them with a laser pointer.
Measure the height difference with a distance meter.
Adjust the height difference with an angle meter.
Check the communication condition with a tester.
One-to-one One-to-one One-to-multiple
Immune to
rain
Immune to
fog
Immune to
sunlight
Optical Wireless Communication unit SOT-TS100A
Theme parks Events Construction sites Factories
Shopping malls Parking areas Communication across a road Power plants/substations
Third major means of communication after wired and radio communications
Security camera
Optical wireless communication unit
Optical wireless communication unit
太陽誘電_光無線なか 校了
• Security camera
Security camera
Security camera
Optical wirelesscommunicationunit
Optical wirelesscommunicationunit
Optical wirelesscommunicationunit
Optical wirelesscommunicationunit
Security camera
Security camera
• Optical wireless communication unit
•Optical wireless communication unit
Public toilet
Parking
AdminBldg
To Kawasaki Station
Nakamisedori Shopping Street
Optical Wireless Communication* Optical wireless communication refers to wireless communication that uses pulses of light.
■ Four features of optical wireless communication ■ Easily adjustable in 5 steps
* For outdoor use, an IP65 or better housing is required.■ Communication immune to weather changes
■ Comparison with the other communication methods
Enables one-to-one wireless communication where cables cannot be laid.
Does not interfere with radio waves. Not subject to radio noise interference.
Easy to install, remove, and reinstall, contributing to cost reduction.
No communications fees.
1
2
3
4
The optical axis can easily be adjusted with tools.
■ Actual installationsTakasaki City Jonan Multilevel Car Parking Tower Nakamisedori Shopping Street in front of Kawasaki Station
・Use for communication across a road ・Surveillance camera relay network across a road・Use in an area where there are many people and jamming easily occurs
STEP
1STEP
2STEP
3STEP
4STEP
5
Communication possible even in torrential rainCommunication is possible even in rain of 300 mm/h.(Tested in a rain test chamber)
Communication possible even when a dense fog advisory is issuedCommunication is possible even in dense fog with a visibility of 40 m or so (when the communication distance is 100 m). (Tested in a fog test chamber)
Communication possible even in the scorching sunCommunication is possible without problems as long as the light-emitting and receiving parts are not directly exposed to sunlight or reflected light.
Form of communication
Communication speed
Installation cost
Jamming/noise interferenceMaintenance of appearance ofinstallation environment
Subject to Radio Act
Installation
Confidentiality
○ Constant
○ Low
○ Not affected
○ Easy
○ No
○ Easy
○ High
Optical wireless communication
○×△×○×○
Constant
The longer the communication distance is, the higher the cost is.
Affected by noise
Difficult
No
Difficult
High
Wired communication
×○×○×○×
Not constant
Low
Jamming occurs.
Easy
Yes
Easy
Low
Radio wireless communication
Roughly adjust the position and angle.
■ Application examples
Finely adjust them with a laser pointer.
Measure the height difference with a distance meter.
Adjust the height difference with an angle meter.
Check the communication condition with a tester.
One-to-one One-to-one One-to-multiple
Immune to
rain
Immune to
fog
Immune to
sunlight
Optical Wireless Communication unit SOT-TS100A
Theme parks Events Construction sites Factories
Shopping malls Parking areas Communication across a road Power plants/substations
Third major means of communication after wired and radio communications
Security camera
Optical wireless communication unit
Optical wireless communication unit
太陽誘電_光無線なか 校了
Outdoor Housing
Housing including a sighting device, useful for optical axis adjustment of the Optical wireless communication unit.
Model: HDW2A
External Dimensions: Width 217.7 × Depth 300.5 × Height 111.0 mm 3,740 g, IP66
Angle Adjustment Plate
Fine adjustment of up/down, right/left positioning is possible, enabling easy optical axis adjustment.
Peripheral Units (Handled by TAIYO YUDEN)
Model: MBA1
External Dimensions: Width 144.4 × Depth 179.2 × Height 33 mm 1,040 g
Combined with the Housing
ItemModelOperating environmentInterfaceCommunication speedCommunication distanceCommunication methodLight-emitting deviceDirectionalityLight-receiving deviceOperating ambient temperatureOperating ambient humidityProtective structure
Operating ambient illuminance
Connection
Consumption current
Source voltage
External dimensionsWeight
DescriptionSOT-TS100AIEEE802.3u (Ethernet)100BASE-TXCable: 100 MbpsMin. 20 m Max. 100 mFull-duplex bidirectionalInfrared LED (Emission wavelength: 860 nm)1°APD-10 to 50 °C. No frost.10 to 85%RH. No condensation.IP40Sunlight: 10,000 lx or less Fluorescent light, incandescent light bulb: 3,000 lx or lessThe light-receiving device shall not be exposed directly to sunlight or ambient light.For signals: RJ-45 modular jackFor power supply: 4-pole connector (e-CON-compatible)Conversion adapter for power plug included.(PL03B plug 4-pole connector)320 mA or less (when 12 VDC is input)12 VDC or 24 VDC (Power supply ripple: within 10%)Peak voltage: within 26 V including ripples Width 81.6 mm × Depth 119 mm × Height 50.5 mm (including protruded parts)Approx. 200 g (main unit only)
Third major means of communication after wired and radio communications
Optical wireless communication unitSOT-TS100A
■ Optical space transmission of Ethernet
■ 100 Mbps full-duplex bidirectional communication with a communication distance of 100 m
■ Stable communication immune to jamming and noise interference
■ Meets communication needs that cannot be covered by conventional wired and wireless communication
Major specifications * Two optical wireless communication units (SOT-TS100A) are required for communication.
太陽誘電_光無線おもて 校了
Top view
Indicators
Rear view
LANDC power inlet
Side view
TAIYO YUDEN CO., LTD. New Business Planning and Development Department http://www.ty-top.comKyobashi East Bldg., 2-7-19, Kyobashi, Chuo-ku, Tokyo 104-0031, Japan ©2019 TAIYO YUDEN CO.,LTD. All Rights Reserved.
Dec. 2019