design of simple beam using staad pro
TRANSCRIPT
Exp No: Date:
DESIGN OF SIMPLE BEAM USING STAAD.PRO
AIM
To design a simple beam using STAAD.Pro
SOFTWARE USED
STAAD.Pro
PROCEDURE:
1) STARTING THE PROGRAM
1. Start STAAD.Pro by double clicking on the icon
2. Click New Project Tick “ Space” Add ‘File Name’ and choose location
Change Length Units to “Meter” and Force units “Kilo Newton” Click ‘Next’.
3. Tick “ Add Beam” Click ‘Finish’.
2) GENERATING THE MODEL GEOMETRY
4. Click on to View from +Z. [Can consider it as the Front view]
5. Draw the beam length using Snap Node.
3) SPECIFY MEMBER PROPERTIES
6. From the file menu go to
Commands Member property Prismatic Rectangle
YD = 0.45 m
ZD = 0.23 m
Click, Add Close
Click, Assign to view Assign Close
(Click ‘Yes’ when prompted to continue.)
4) SPECIFY SUPPORT TYPES
7. Commands Support specifications Fixed Click Add
Select support 2 Assign to view Assign
(Click ‘Yes’ when prompted to proceed)
5) SPECIFY MEMBER LOADS
8. Add self-weight and member loads.
Commands Loading Primary Load Give title (and type) Add
(1) To specify self-weight:
In the ‘Load & Definition’ window Click New Load items Self-weight
Then Assign each loads to the member.
Select the load Assign to view Assign Close
(Click ‘Yes’ when prompted to continue)
9. Scale the plotted beam loads as required. Goto toolbar
Scale Point Force (50), Dist.Force (25) ApplyOK
This will scale the length of the loads to eye view clarity.
10. Add Load values : Scale Labels Load values Apply OK.
11. Add Dimensions
Click Dimension Dimension to View Display Close
6) ANALYSIS
Analysis consists of three phases – Pre-Analysis, Analysis, Post Analysis
Start Analysing the beam
12. Pre-Analysis:
Commands Pre- Analysis Print Member Information To View OK.
13. Analysis:
Commands Analysis Perform Analysis
All or No Print OK.
14. Result Analysis:
Commands Post Analysis Analysis Results Yes OK
Commands Analyze Run Analysis
15. Results:
Mode Post processing Result view options Apply OK.
Click ‘Go to post processing mode’ Done.
7) STRUCTURE DIAGRAMS
16. View structure diagrams
View Structure diagrams Loads and Results Apply OK.
17. To get the various diagrams like SFD, BMD, etc.
Results View Values Beam results Ranges All
Go to the next tab – Beam Results Tick the required data Annotate
(You need to ON SFD and BMD or it will ask to ON automatically)
8) DESIGN
18. Go to Commands Design Concrete Design
Change ‘Current Code’ to ‘IS 456’
19. Click on Select parameters ( )
Click on symbol ‘<<’ Add necessary parameters like clear, Fc, Fymain, etc.
20. Click on Define Parameters ( )
Add values for each parameter as below
Clear = 0.03 m
Fc = 25000 kN/m2 (If mix is M25)
Fymain = 41500 kN/m2 (If steel bar used is Fe415)
If more parameters are added, give suitable values.
Note: Click ‘Add’ after each Close
21. Assign these parameters to the member
Select the parameter in ‘Concrete Design’ window Assign to view
22. Click on ‘Commands’ ( )
Add the required design requirements. Here we have a beam only. So we add two
terms. (1) DESIGN BEAM and (2) TAKE OFF.
23. Again come back to ‘Concrete Design’ window
Click on ‘DESIGN BEAM’ Assign to view Assign
24. Run Pre Analysis, Analysis, and Post Analysis again and the analyse the beam.
25. Analyze ‘Go to post processing mode’
26. Come back to ‘Modelling’ mode Double click the beam. It pop up a screen
showing various information about the beam.
Information includes Geometry, Property, Loading, Shear Bending, Deflection, Concrete
Design etc.
27. Print ‘Input File’
Go to File View Input Command file
Copy and paste input details to MS Word and print.
28. Print STAAD Analysis Output
Go to File View STAAD Analysis Output
Copy and paste to MS Word and print required details from it.
29. The printout of below items are taken care
(1) Loading Diagram
(2) SFD
(3) BMD
(4) Deflection Pattern
(5) Input file
(6) Concrete Take Off
(7) Concrete design
30. Design of the simple beam is completed.
RESULT
Analysis and design of a simple beam is done and the required structural drawings were
obtained using STAAD.Pro.
DESIGN OF SIMPLE BEAM – DETAILS
LOADING DIAGRAM
SHEAR FORCE DIAGRAM (SFD)
BENDING MOMENT DIAGRAM (BMD)
DEFLECTION PATTERN
INPUT FILE
STAAD SPACE
START JOB INFORMATION
ENGINEER DATE 21-Jun-17
END JOB INFORMATION
INPUT WIDTH 79
UNIT METER KN
JOINT COORDINATES
1 1 5 0; 2 9 5 0;
MEMBER INCIDENCES
1 1 2;
DEFINE MATERIAL START
ISOTROPIC CONCRETE
E 2.17185e+007
POISSON 0.17
DENSITY 23.5616
ALPHA 1e-005
DAMP 0.05
TYPE CONCRETE
STRENGTH FCU 27579
END DEFINE MATERIAL
MEMBER PROPERTY
1 PRIS YD 0.45 ZD 0.23
CONSTANTS
MATERIAL CONCRETE ALL
SUPPORTS
1 2 FIXED
LOAD 1 LOADTYPE None TITLE LOAD CASE 1
SELFWEIGHT Y -1 LIST ALL
MEMBER LOAD
1 UNI GY -20 0 3
1 CON GY -50 6 0
PRINT MEMBER INFORMATION ALL
PRINT MEMBER INFORMATION ALL
PERFORM ANALYSIS PRINT ALL
PRINT ANALYSIS RESULTS
START CONCRETE DESIGN
CODE INDIAN
CLEAR 0.03 ALL
FC 25000 ALL
FYMAIN 415000 ALL
DESIGN BEAM 1
CONCRETE TAKE
END CONCRETE DESIGN
PERFORM ANALYSIS PRINT ALL
PRINT ANALYSIS RESULTS
FINISH
SUPPORT REACTIONS
DESIGN RESULTS
CONCRETE TAKE OFF
CONCRETE BEAM DESIGN DETAILS