design of thin-walled members
DESCRIPTION
Design of Thin-Walled Members. Various shapes of cold-formed sections. Advantages. Lightness High strength and stiffness Ease of prefabrication and mass production Fast and easy erection and installation Substantial elimination of delays due to weather More accurate detailing - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/1.jpg)
Design of Thin-Walled Members
![Page 2: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/2.jpg)
Various shapes of cold-formed sections
![Page 3: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/3.jpg)
![Page 4: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/4.jpg)
![Page 5: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/5.jpg)
![Page 6: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/6.jpg)
![Page 7: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/7.jpg)
![Page 8: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/8.jpg)
![Page 9: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/9.jpg)
![Page 10: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/10.jpg)
Advantages• Lightness• High strength and stiffness• Ease of prefabrication and mass production• Fast and easy erection and installation• Substantial elimination of delays due to weather• More accurate detailing• Non shrinking and non creeping at ambient temperatures• Formwork unneeded• Termite-proof and rot proof• Uniform quality• Economy in transportation and handling• Non combustibility• Recyclable material
![Page 11: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/11.jpg)
Characteristic Behavior• relatively high width to thickness ratios.
• Un-stiffened or incompletely restrained parts of sections.
• singly symmetrical or unsymmetrical shapes.
• geometrical imperfections of the same order as or exceeding the thickness of the section.
• structural imperfections caused by the cold-forming process.
![Page 12: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/12.jpg)
Characteristic Behavior• buckling within the range of large deflections.
• effects of local buckling on overall stability.
• combined torsional and flexural buckling.
• shear lag and curling effects.
• effects of varying residual stresses over the section.
![Page 13: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/13.jpg)
Materials
• For cold-formed sections and sheeting it is preferable to use cold-rolled continuously galvanized steel with yield stresses in the range of 280-320-350N/mm2, and with a total elongation of at least 10%
![Page 14: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/14.jpg)
ASD (Allowable Stress Design) Method
![Page 15: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/15.jpg)
LRFD (Load and Resistance Factor Design) Method
![Page 16: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/16.jpg)
Safety Factors and Resistance Factors
![Page 17: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/17.jpg)
Nominal Loads
![Page 18: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/18.jpg)
Effects of Cold Forming• As cold forming involves work hardening effects, the
yield stress, the ultimate strength and the ductility are all locally influenced by an amount which depends on the bending radius, the thickness of the sheet, the type of steel and the forming process.
• The average yield stress of the section then depends on the number of corners and the width of the flat elements
![Page 19: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/19.jpg)
Effects of Cold Forming• The average yield
stress can be estimated by approximate expressions given in the appropriate codes. In the example, the average yield stress ratio fya/fyb» 1,05 and the corner yield stress ratio fyc/fyb» 1,4.
![Page 20: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/20.jpg)
Effects of Cold Formingfull-section tensile yield strength;
![Page 21: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/21.jpg)
The effective width concept
![Page 22: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/22.jpg)
Effective Cross-sections• evaluate the effective width of the compression
elements of the section• calculate the geometric properties of the
effective section• the design procedure is the same as for thick-
walled sections• the resistance of a thin-walled effective cross-
section is limited by the design yield stress at any part of the section, based on an elastic analysis.
• the design resistance is based on the value fy/M, where M is a partial safety factor for resistance (normally M=1,1).
![Page 23: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/23.jpg)
Validity of the effective width concept
![Page 24: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/24.jpg)
Effective Section
k = the buckling factor = 4 for stiffened Elements = 0.43 for unstiffened element
Uniformly compressed stiffened and unstiffened elements
w = the flat width;ρ = the reduction factorλ = a slenderness factorf = the stress in the element
![Page 25: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/25.jpg)
Effective SectionUniformly compressed stiffened and unstiffened elements
![Page 26: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/26.jpg)
Effective Section
w = the flat width;ρ = the reduction factorλ = a slenderness factorf = the stress in the element
k = the buckling factor = 4 for stiffened Elements = 0.43 for unstiffened element
checking the serviceability state of uniformly compressed elements supported by webs on both edges:
![Page 27: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/27.jpg)
Effective Section
Ψ = f2/f1
b = the effective width (uniformlycompressed stiffened elements) with f1 substituted by f and with k determined fromk=4+2(1–ψ)3+2(1–ψ)
Webs and stiffened elements with stress gradient
![Page 28: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/28.jpg)
Doubly supported element
![Page 29: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/29.jpg)
Singly supported element
![Page 30: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/30.jpg)
Effective SectionUnstiffened elements and edge stiffened with stress gradient
In this case, the code suggests evaluating the effective widths in accordance with Section 5.4.2 (uniformly compressed unstiffened elements) using a uniform distribution with the maximum value of stress f.
![Page 31: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/31.jpg)
Effective Section
Uniformly compressed elements with an edge stiffener
Uniformly compressed elements with one intermediate stiffener
![Page 32: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/32.jpg)
Limits for b/t ratios• The design rules
give limits for b/t ratios as.
• These maximum width-to-thickness ratios depend partly on limited experimental evidence, and partly on experience from manufacturing and handling sections
![Page 33: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/33.jpg)
Resistance vs. geometrical properties.
![Page 34: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/34.jpg)
RESISTANCE OF CROSS-SECTIONSLRFD Factored resistance фRn
Resistance under axial tension
Resistance under axial compression
Resistance under bending moment
Combined axial tension and bending
Combined axial compression and bending
Combined shear force and bending moment
Buckling resistance under axial compression
Buckling resistance under axial compression and bending
![Page 35: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/35.jpg)
Resistance under axial tension - LRFD
An = the net area of the cross-section;
Fy = the design yield stress, which takes into account the increase in basic yield strength due to strain-hardening
Фt = resistance reduction factor
The nominal tensile strength Tn shall be determined as follows
![Page 36: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/36.jpg)
Resistance under axial compression - LRFD
Ae = the effective area at the stress Fy;
Fy = the design yield stress
Фt = resistance reduction factor
Assuming that the member is not subject to the risk of axial buckling,the nominal compression strength Pn shall be determined as follows
![Page 37: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/37.jpg)
Resistance under bending moment - LRFD
Se = the elastic section modulus of the effective section, calculated for extreme compression or tension fiber at Fy;
Fy = the design yield stress—for the section to be fully effective it should take into account the increase of the basic yield strength due to strain-hardening.
Фb = resistance reduction factor
The nominal flexural strength Mn shall be determined as follows:
for sections with unstiffened compression flange
![Page 38: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/38.jpg)
Combined axial tension and bending - LRFD
T = the required tensile axial strength;Tn = the nominal tensile axial strengthMx, My = the required flexural strengths about the centroidal axes;Mnx, Mny = the nominal flexural strengths about the centroidal;Mnxt = SfxtFy Mnyt = SfytFy
Sfxt = the elastic section modulus of the full unreduced section for the extreme tension fibre about the x axis;Sfyt=the elastic section modulus of the full unreduced section for the extreme tension fibre about the y axis;фb, фt=are the appropriate safety factors.
The required strengths T, Mx, My shall satisfy the following equations
![Page 39: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/39.jpg)
Combined axial compression and bending - LRFD
P = the required compressive axial strength;
Pn = the nominal axial strength
Mx, My = the required flexural strengths with respect to the centroidal axes of the effective section determined for the required cornpressive axial strength alone;
Mnx, Mny = the nominal flexural strengths about the centroidal axes;
фb, фc = the appropriate safety factors.
If the member is not subject to the risk of axial buckling, the required strengths P, Mx, My shall satisfy the following equations,
![Page 40: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/40.jpg)
Buckling resistance under axial compression - LRFD
Ae = the effective area at the stress Fn;
Fe = the smallest value for the elastic flexural, torsional and torsional-flexural bucklingstress. (the case here is for elastic flexural buckling)
E is the modulus of elasticity,K is the effective length factorL is the unbraced lengthr is the radius of gyration of the full, unreduced section.
Фt = resistance reduction factor
The nominal axial strength Pn shall be calculated as follows
for λc≤1.5
for λc>1.5
![Page 41: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/41.jpg)
Buckling resistance under axial compression - LRFD
![Page 42: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/42.jpg)
Buckling resistance under axial compression and bending - LRFD
P = the required compressive axial strength;Pn = the nominal axial strength;Pno = the nominal axial strength (i.e. with Fn=Fy);Mx, My = the required flexural strengths with respect to the centroidal axes of the effective section determined for the required compressive axial strength alone;Mnx, Mny = the nominal flexural strengths about the centroidal axes фb, фc = are the appropriate safety factors
The required strengths P, Mx, My shall satisfy the following equations
![Page 43: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/43.jpg)
Buckling resistance under axial compression and bending - LRFD
Ix, Iy=the moments of inertia of the full unreduced section about the x axis and y axis,respectively;Lx, Ly=the actual unbraced lengths for bending about the x axis and y axis,respectively;
The reduction coefficient α is given by:
![Page 44: Design of Thin-Walled Members](https://reader033.vdocuments.net/reader033/viewer/2022061603/56812d6c550346895d92802d/html5/thumbnails/44.jpg)
Buckling resistance under axial compression and bending - LRFD
Kx, Ky = the effective length factors for buckling about the x and y axes,Cmx, Cmy=coefficients defined as follows:Cm=0.85 for compression member in frames subject to joint translation (sideways);Cm=0.6–0.4M1/M2 for restrained compression members in frames braced against joint translation and not subjected to transverse loading between their supports in the plane of bending (M1/M2 is the ratio of the smaller to the larger moment at the end of themember);Cm= 0.85 for compression members in frames braced against joint translation and subjected to transverse loading between their supports in the plane of bending, when their ends are restrained;Cm=1.00 for compression members in frames braced against joint translation and subjected to transverse loading between their supports in the plane of bending, when their ends are not restrained.