DESIGN PROJECT

“STAR”CHRISTMAS CARD

2 /10 WWW.CREATE-YOUR-STYLE.COM

SWAROVSKI ELEMENTS Supplies & Tools

Sewing

Article Product Group Article No. Amount Size Color Color Code

Beads 5000 15 pcs. 4 mm Crystal Moonlight 001 MOL

Pendants 6714 1 pc. 28 mm Crystal AB 001 AB

Supplies

Card, cream, 15.5 x 15.5 cmFake fur, white, 5 x 5 cmSewing silk, gold

Tools

Beading needleDouble sided tapeNeedleScissors1 Sheet of paper, A4Tape

Level of design: BEGINNER

Have also a look at the text instruction at the last page!

CHRISTMAS CARD “STAR”

Step 1

5 cm

5 cm

STEP 1

3 /10 WWW.CREATE-YOUR-STYLE.COM

14 cm

3.6 cm

STEP 2

4 /10 WWW.CREATE-YOUR-STYLE.COM

5 /10 WWW.CREATE-YOUR-STYLE.COM

Step 3

Repeat15.5 cm

15.5 cm

5 /10WWW.CREATE-YOUR-STYLE.COM

STEP 3

6 /10 WWW.CREATE-YOUR-STYLE.COM 6 /10 W

STEP 4

1.5 m

7 /10 WWW.CREATE-YOUR-STYLE.COM

Step 5

Repeat

STEP 5

8 /10 WWW.CREATE-YOUR-STYLE.COM

Step 6

x4

STEP 6

9 /10 WWW.CREATE-YOUR-STYLE.COM

10 /10 WWW.CREATE-YOUR-STYLE.COM

STEP 1: Cut the fur to measure of 5 x 5 cm.

STEP 2: Cut out the pattern in this illustration or construct one for yourself with the measurements shown in the illustration. Apply double sided tape exactly in the middle and on the back side of this pattern.

STEP 3: Stick the pattern on to the middle of the card, (the size of the card should be 15.5 x 15.5 cm.) and pierce through the pattern on the marked points using a needle. Once you have pierced through every marked point on the pattern you can remove the pattern.

STEP 4: Cut 1.5 m sewing silk and thread onto the beading needle so that the thread length is equal on both sides. Stitch from the top side on to the back of the card and tie the leftover thread on the top side of the card to a double knot and stick it with a tape as depicted in the illustrations.

STEP 5: Come out with the thread and needle at the point shown in the illustration in this step and insert the fi rst Swarovski Bead art. 5000 4 mm Crystal Moonlight onto it. Stitch through the entire length of the star inserting one Bead art. 5000 4 mm Crystal Moonlight with each stitch and come out at the centre of the card as illustrated.

STEP 6: Pierce through the fur piece and insert one Swarovski Pendant art. 6714 28 mm Crystal AB on to the thread, pierce back through the same point and secure it as shown in the illustrations in this step.

CREATE YOUR STYLE with SWAROVSKI ELEMENTS Design ProjectChristmas Card “Star”