design verification test report tsm/ssm tsm-125-01...

Project Number: Design Verification Test Report Tracking Code: TC0935--2714_Report_Rev_4

Requested by: Vico Zhao Date: 10/30/2009 Product Rev: BJ

Part #: TSM-125-01-S-DV-A/SSM-125-S-DV Lot #: N/A Tech: Kason He Eng: Vico Zhao

Part description: TSM/SSM Qty to test: 50

Test Start: 8/26/2009 Test Completed: 10/30/2009

of 53

Design Verification Test Report

TSM/SSM

TSM-125-01-S-DV-A/SSM-125-S-DV

Tracking Code: TC0935--2714_Report_Rev_3 Part #: TSM-125-01-S-DV-A/SSM-125-S-DV

Part description: TSM/SSM

of 53

CERTIFICATION

All instruments and measuring equipment were calibrated to National Institute for Standards and Technology (NIST)

traceable standards according to IS0 10012-l and ANSI/NCSL 2540-1, as applicable.

All contents contained herein are the property of Samtec. No portion of this report, in part or in full shall be

reproduced without prior written approval of Samtec.

SCOPE To perform the following tests: Design Verification Test , See test plan

APPLICABLE DOCUMENTS

Standards: EIA Publication 364

TEST SAMPLES AND PREPARATION 1) All materials were manufactured in accordance with the applicable product specification.

2) All test samples were identified and encoded to maintain traceability throughout the test sequences.

3) After soldering, the parts to be used for LLCR and DWV/IR testing were cleaned according to TLWI-0001.

4) Either an automated cleaning procedure or an ultrasonic cleaning procedure may be used.

5) The automated procedure is used with aqueous compatible soldering materials.

6) Parts not intended for testing LLCR and DWV/IR are visually inspected and cleaned if necessary.

7) Any additional preparation will be noted in the individual test sequences.

8) Solder Information: Lead free

9) Re-Flow Time/Temp: See accompanying profile.

10) Samtec Test PCBs used: PCB-102150-TST/ PCB-102151-TST



of 53

TYPICAL OVEN PROFILE (Soldering Parts to Test Boards)



of 53

FLOWCHARTS

IR & DWV

TEST GROUP A1 GROUP A2 GROUP A3 GROUP B

STEP 2 Mated Sets

2 Unmated of Part # Being

Tested

2 Unmated of Mating Part

# 2 Mated Sets

Break Down -

Pin to Pin

Break Down -

Pin to Pin

Break Down -

Pin to Pin Pin to Pin

01

DWV/Break Down

Voltage

DWV/Break Down

Voltage

DWV/Break Down

Voltage

IR & DWV at test

voltage (on both mated

sets and on each

connector unmated)

02

Thermal Aging (both

sets unmated)

03

IR & DWV at test


sets and on each

connector unmated)

04

Cyclic Humidity (both

sets unmated)

05

IR & DWV at test


sets and on each

connector unmated)

* - DWV on group B to be performed at Test Voltage

DWV test voltage is equal to 75% of the lowest break down voltage from group A1, A2 or A3

Thermal Aging = EIA-364-17, Test Condition 4 (105 °C)

Time Condition 'B' (250 hours)

Humidity = EIA-364-31, Test Condition B (240 Hours)

and Method III (+25° C to +65° C @ 90%RH to 98% RH)

ambient pre-condition and delete steps 7a and 7b

IR = EIA-364-21

DWV = EIA-364-20, Test Condition 1

Part # Being Tested:

Mating Part #:

PCB Required: PCB-102150-TST-XX

SSW-136-22-S-D-VS (SSW-125-22-S-D-VS)

TSM-136-01-S-DV-A (TSM-125-01-S-DV-A)

Gas Tight

TEST GROUP A

STEP 192 Points

01 LLCR-1

02 Gas Tight

03 LLCR-2

Gas Tight = EIA-364-36A

LLCR = EIA-364-23, LLCR

use Keithley 580 in the dry circuit mode, 10 mA Max


Part # Being Tested: SSW-136-22-S-D-VS (SSW-125-22-S-D-VS)

Mating Part #: TSM-136-01-S-DV-A (TSM-125-01-S-DV-A)



of 53

FLOWCHARTS Continued

Mating/Unmating/Gaps/Normal Force/Deflection Force

TEST GROUP A GROUP B1 GROUP B2

STEP10 Boards

(each position submitted)

Individual Contacts

(8-10 min)

Individual Contacts

(8-10 min)

01 Contact Gaps Setup Approved Setup Approved

02

Mating / Unmating (smallest,

middle, largest positions)

Normal Force (in the body and

soldered on PCB unless

otherwise specified)

Thermal Aging (Mated)

03 25 Cycles

Normal Force (in the body and

soldered on PCB unless

otherwise specified)

04 Clean w/Compressed Air

05



06 25 Cycles (50 Total)


08





11





14



15 Contact Gaps

16 Thermal Aging (Mated)

17



18 Contact Gaps

19 Cyclic Humidity (Mated)

20



Thermal Aging = EIA-364-17, Test Condition 4 (105 °C)


Humidity = EIA-364-31, Test Condition B (240 Hours)

and Method III (+25 °C to +65 °C @ 90%RH to 98% RH)


Mating/Un-Mating Forces = EIA-364-13

Normal Force = EIA-364-04

(Perpendicular) displacement Force = 12.7 mm/min +/- 6 mm/min

Spec is 50 N @ 1 mm displacement

Contact Gaps/Height - No standard method. Usually measured optically

PCB Required:

PCB-102152-TST-XX/PCB-102145-TST-XX/PCB-

102151-TST-XX

SSW-136-22-S-D-VS (SSW-125-22-S-D-VS)

TSM-136-01-S-DV-A (TSM-125-01-S-DV-A)


Mating Part #:



of 53

FLOWCHARTS Continued

Durability/Thermal Age/Cyclic Humidity

TEST GROUP A

STEP 192 Points

100 Cycles

01 LLCR-1

02 100 Cycles

03 Clean Mating Interface

04 LLCR-2

05

Thermal Age (Mated

and undisturbed)

06 LLCR-3

07

Cyclic Humidity

(Mated and

undisturbed)

08 LLCR-4

Thermal Aging = EIA-364-17, Test Condition 4, 105 deg C;


Humidity =EIA-364-31, Test Condition B (240 Hours)

and Method III (+25 ° C to +65 ° C @ 90%RH to 98% RH)


LLCR = EIA-364-23, LLCR

use Keithley 580 in the dry circuit mode, 10 mA Max


SSW-136-22-S-D-VS (SSW-125-22-S-D-VS)

TSM-136-01-S-DV-A (TSM-125-01-S-DV-A)


Mating Part #:

Current Carrying Capacity 3 Mated Assemblies Each

TEST GROUP A GROUP B GROUP C GROUP D GROUP E

STEP 3 Mated Assembies 3 Mated Assembies 3 Mated Assembies 3 Mated Assembies 3 Mated Assembies

2 CONTACT POWERED 4 CONTACTS POWERED 6 CONTACTS POWERED 8 CONTACTS POWERED ALL CONTACTS POWERED

01 CCC CCC CCC CCC CCC

CCC, Temp rise = EIA-364-70

(TIN PLATING) - Tabulate calculated current at RT, 65° C, 75° C and 95° C

after derating 20% and based on 105° C

(GOLD PLATING) - Tabulate calculated current at RT, 85° C, 95° C and 115° C

after derating 20% and based on 125° C



of 53

ATTRIBUTE DEFINITIONS The following is a brief, simplified description of attributes.

THERMAL: 1) EIA-364-17, Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors.

2) Test Condition 4 at 105° C.

3) Test Time Condition B for 250 hours.

4) All test samples are pre-conditioned at ambient.

5) All test samples are exposed to environmental stressing in the mated condition.

HUMIDITY: 1) Reference document: EIA-364-31, Humidity Test Procedure for Electrical Connectors.

2) Test Condition B, 240 Hours.

3) Method III, +25° C to + 65° C, 90% to 98% Relative Humidity excluding sub-cycles 7a and 7b.

4) All samples are pre-conditioned at ambient.

5) All test samples are exposed to environmental stressing in the mated condition.

TEMPERATURE RISE (Current Carrying Capacity, CCC): 1) EIA-364-70, Temperature Rise versus Current Test Procedure for Electrical Connectors and Sockets.

2) When current passes through a contact, the temperature of the contact increases as a result of I2R (resistive)

heating.

3) The number of contacts being investigated plays a significant part in power dissipation and therefore

temperature rise.

4) The size of the temperature probe can affect the measured temperature.

5) Copper traces on PC boards will contribute to temperature rise:

a. Self heating (resistive)

b. Reduction in heat sink capacity affecting the heated contacts

6) A de-rating curve, usually 20%, is calculated.

7) Calculated de-rated currents at three temperature points are reported:

a. Ambient

b. 80о C

c. 95о C

d. 115о C

8) Typically, neighboring contacts (in close proximity to maximize heat build up) are energized.

9) The thermocouple (or temperature measuring probe) will be positioned at a location to sense the maximum

temperature in the vicinity of the heat generation area.

10) A computer program, TR 803.exe, ensures accurate stability for data acquisition.

11) Hook-up wire cross section is larger than the cross section of any connector leads/PC board traces, jumpers,

etc.

12) Hook-up wire length is longer than the minimum specified in the referencing standard.

CONTACT GAPS: 1) Gaps above the surrounding plastic surface were measured before and after stressing the contacts (e.g.

thermal aging, mechanical cycling, etc.).

2) Typically, all contacts on the connector are measured.



of 53

ATTRIBUTE DEFINITIONS Continued The following is a brief, simplified description of attributes.

MATING/UNMATING: 1) Reference document: EIA-364-13, Mating and Unmating Forces Test Procedure for Electrical Connectors.

2) The full insertion position was to within 0.003” to 0.004” of the plug bottoming out in the receptacle to

prevent damage to the system under test.

3) One of the mating parts is secured to a floating X-Y table to prevent damage during cycling.

NORMAL FORCE (FOR CONTACTS TESTED OUTSIDE THE HOUSING): 1) Reference document: EIA-364-04, Normal Force Test Procedure for Electrical Connectors.

2) The contacts shall be tested in the loose state, not inserted in connector housing.

3) The contacts shall be prepared to allow access to the spring member at the same attitude and deflection level

as would occur in actual use.

4) In the event that portions of the contact prevent insertion of the test probe and/or deflection of the spring

member under evaluation, said material shall be removed leaving the appropriate contact surfaces exposed.

5) In the case of multi-tine contacts, each tine shall be tested independently on separate samples as required.

6) The connector housing shall be simulated, if required, in order to provide an accurate representation of the

actual contact system performance.

7) A holding fixture shall be fashioned to allow the contact to be properly deflected.

8) Said holding fixture shall be mounted on a floating, adjustable, X-Y table on the base of the Dillon TC2,

computer controlled test stand with a deflection measurement system accuracy of 5 µm (0.0002”).

9) The probe shall be attached to a Dillon P/N 49761-0105, 5 N (1.1 Lb) load cell providing an accuracy of

0.2%.

10) The nominal deflection rate shall be 5 mm (0.2”)/minute.

11) Unless otherwise noted a minimum of five contacts shall be tested.

12) The force/deflection characteristic to load and unload each contact shall be repeated five times.

13) The system shall utilize the TC2 software in order to acquire and record the test data.

14) The permanent set of each contact shall be measured within the TC2 software.

15) The acquired data shall be graphed with the deflection data on the X-axis and the force data on the Y-axis

and a print out will be stored with the Tracking Code paperwork.



of 53


INSULATION RESISTANCE (IR): To determine the resistance of insulation materials to leakage of current through or on the surface of these

materials when a DC potential is applied.

1) PROCEDURE:

a. Reference document: EIA-364-21, Insulation Resistance Test Procedure for Electrical Connectors.

b. Test Conditions:

i. Between Adjacent Contacts or Signal-to-Ground

ii. Electrification Time 2.0 minutes

iii. Test Voltage (500 VDC) corresponds to calibration settings for measuring resistances.

2) MEASUREMENTS:

3) When the specified test voltage is applied (VDC), the insulation resistance shall not be less than 5000

megohms.

DIELECTRIC WITHSTANDING VOLTAGE (DWV): To determine if the sockets can operate at its rated voltage and withstand momentary over potentials due to

switching, surges, and other similar phenomenon. Separate samples are used to evaluate the effect of

environmental stresses so not to influence the readings from arcing that occurs during the measurement

process.

1) PROCEDURE:

a. Reference document: EIA-364-20, Withstanding Voltage Test Procedure for Electrical Connectors.

b. Test Conditions:

i. Between Adjacent Contacts or Signal-to-Ground

ii. Rate of Application 500 V/Sec

iii. Test Voltage (VAC) until breakdown occurs

2) MEASUREMENTS/CALCULATIONS

a. The breakdown voltage shall be measured and recorded.

b. The dielectric withstanding voltage shall be recorded as 75% of the minimum breakdown voltage.

c. The working voltage shall be recorded as one-third (1/3) of the dielectric withstanding voltage (one-

fourth of the breakdown voltage).

LLCR: 1) EIA-364-23, Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets.

2) A computer program, LLCR 221.exe, ensures repeatability for data acquisition.

3) The following guidelines are used to categorize the changes in LLCR as a result from stressing

a. <= +5.0 mOhms: ----------------------------- Stable

b. +5.1 to +10.0 mOhms: ---------------------- Minor

c. +10.1 to +15.0 mOhms: -------------------- Acceptable

d. +15.1 to +50.0 mOhms: -------------------- Marginal

e. +50.1 to +2000 mOhms: ------------------- Unstable

f. >+2000 mOhms: ----------------------------- Open Failure



of 53


GAS TIGHT: To provide method for evaluating the ability of the contacting surfaces in preventing penetration of harsh

vapors which might lead to oxide formation that may degrade the electrical performance of the contact

system.

1) EIA-364-23, Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets.


3) The following guidelines are used to categorize the changes in LLCR as a result from stressing

a. <= +5.0 mOhms: ----------------------------- Stable

b. +5.1 to +10.0 mOhms: ---------------------- Minor





4) Procedure:

a. Reference document: EIA-364-36, Test Procedure for Determination of Gas-Tight Characteristics

for Electrical Connectors, Sockets and/or Contact Systems.

b. Test Conditions:

i. Class II--- Mated pairs of contacts assembled to their plastic housings.

ii. Reagent grade Nitric Acid shall be used of sufficient volume to saturate the test chamber

iii. The ratio of the volume of the test chamber to the surface area of the acid shall be 10:1.

iv. The chamber shall be saturated with the vapor for at least 15 minutes before samples are

added.

v. Exposure time, 55 to 65 minutes.

vi. The samples shall be no closer to the chamber walls than 1 inches and no closer to the

surface of the acid than 3 inches.

vii. The samples shall be dried after exposure for a minimum of 1 hour.

viii. Drying temperature 50о C

ix. The final LLCR shall be conducted within 1 hour after drying.



of 53

RESULTS

Temperature Rise, CCC at a 20% de-rating

CCC for a 30°C Temperature Rise ----------------------- 5.4A per contact with 2 adjacent contacts powered




CCC for a 30°C Temperature Rise ----------------------- 2.0A per contact with all adjacent contacts powered

Contact Gaps

2 Position

Initial

o Min -------------------------------------------------- 0.0161 in

o Max ------------------------------------------------- 0.0180 in

After 100 Cycles

o Min -------------------------------------------------- 0.0171 in

o Max ------------------------------------------------- 0.0184 in

Thermal

o Min -------------------------------------------------- 0.0175 in

o Max ------------------------------------------------- 0.0192 in

20 Position

Initial

o Min -------------------------------------------------- 0.0164 in

o Max ------------------------------------------------- 0.0178 in

After 100 Cycles

o Min -------------------------------------------------- 0.0169 in

o Max ------------------------------------------------- 0.0183 in

Thermal

o Min -------------------------------------------------- 0.0176 in

o Max ------------------------------------------------- 0.0187 in

36 Position

Initial

o Min -------------------------------------------------- 0.0162 in

o Max ------------------------------------------------- 0.0181 in

After 100 Cycles

o Min -------------------------------------------------- 0.0163 in

o Max ------------------------------------------------- 0.0184 in

Thermal

o Min -------------------------------------------------- 0.0172 in

o Max ------------------------------------------------- 0.0187 in



of 53

RESULTS Continued Mating – Unmating Forces

2 Position

Initial

o Mating

Min --------------------------------------- 0.80 Lbs

Max --------------------------------------- 1.00 Lbs

o Unmating

Min --------------------------------------- 0.45 Lbs

Max --------------------------------------- 0.90 Lbs

After 100 Cycles

o Mating

Min --------------------------------------- 0.63 Lbs

Max --------------------------------------- 0.70 Lbs

o Unmating

Min --------------------------------------- 0.43 Lbs

Max --------------------------------------- 0.60 Lbs

Thermal

o Mating

Min --------------------------------------- 0.54 Lbs

Max --------------------------------------- 0.60 Lbs

o Unmating

Min --------------------------------------- 0.45 Lbs

Max --------------------------------------- 0.50 Lbs

Humidity

o Mating

Min --------------------------------------- 0.50 Lbs

Max --------------------------------------- 0.60 Lbs

o Unmating

Min --------------------------------------- 0.44 Lbs

Max --------------------------------------- 0.50 Lbs



of 53

RESULTS Continued 20 Position

Initial

o Mating

Min --------------------------------------- 7.44 Lbs

Max --------------------------------------- 9.60 Lbs

o Unmating

Min --------------------------------------- 6.60 Lbs

Max --------------------------------------- 8.30 Lbs

After 100 Cycles

o Mating

Min --------------------------------------- 6.22 Lbs

Max --------------------------------------- 8.90 Lbs

o Unmating

Min --------------------------------------- 5.58 Lbs

Max --------------------------------------- 6.80 Lbs

Thermal

o Mating

Min --------------------------------------- 6.27 Lbs

Max --------------------------------------- 8.00 Lbs

o Unmating

Min --------------------------------------- 5.15 Lbs

Max --------------------------------------- 6.40 Lbs

Humidity

o Mating

Min --------------------------------------- 6.11 Lbs

Max --------------------------------------- 8.00 Lbs

o Unmating

Min --------------------------------------- 5.14 Lbs

Max --------------------------------------- 6.90 Lbs



of 53

RESULTS Continued

36 Position

Initial

o Mating

Min -------------------------------------- 15.39 Lbs

Max -------------------------------------- 20.80 Lbs

o Unmating

Min -------------------------------------- 12.79 Lbs

Max -------------------------------------- 14.50 Lbs

After 100 Cycles

o Mating

Min -------------------------------------- 14.18 Lbs

Max -------------------------------------- 17.10 Lbs

o Unmating

Min -------------------------------------- 10.53 Lbs

Max -------------------------------------- 11.90 Lbs

Thermal

o Mating

Min -------------------------------------- 12.44 Lbs

Max -------------------------------------- 14.20 Lbs

o Unmating

Min -------------------------------------- 10.19 Lbs

Max -------------------------------------- 12.00 Lbs

Humidity

o Mating

Min -------------------------------------- 12.19 Lbs

Max -------------------------------------- 14.90 Lbs

o Unmating

Min -------------------------------------- 10.23 Lbs

Max -------------------------------------- 12.40 Lbs



of 53

RESULTS Continued

Normal Force at 0.12 mm deflection

Initial

o Min ----------------------------------------------- 130.00 gf Set ----- 0.001 mm

o Max ---------------------------------------------- 148.00 gf Set ----- 0.010 mm

Thermal

o Min ----------------------------------------------- 122.00 gf Set ----- 0.000 mm

o Max ---------------------------------------------- 146.00 gf Set ----- 0.010 mm

Insulation Resistance minimums, IR

Initial

o Mated ------------------------------------------------ 10000Meg Ω ------------------------- Pass

o Unmated -------------------------------------------- 10000Meg Ω ------------------------ Pass

Thermal

o Mated ------------------------------------------------ 10000Meg Ω ------------------------ Pass


Humidity

o Mated ------------------------------------------------ 10000Meg Ω ------------------------ Pass


Dielectric Withstanding Voltage minimums, DWV

Breakdown ------------------------------------- 1440 VAC

DWV --------------------------------------------- 1080 VAC

Working voltage --------------------------------- 360 VAC

Initial ------------------------------------- Passed

Thermal ------------------------------------- Passed

Humidity ------------------------------------- Passed



of 53

RESULTS Continued

LLCR Durability (192 LLCR test points)

Initial ----------------------------------------------------------------- 6.6mOhms Max

Durability, 100 Cycles

o <= +5.0 mOhms ---------------------------------- 192 Points ------------------------- Stable

o +5.1 to +10.0 mOhms ----------------------------------- 0 Points ------------------------- Minor

o +10.1 to +15.0 mOhms --------------------------------- 0 Points ------------------------- Acceptable

o +15.1 to +50.0 mOhms --------------------------------- 0 Points ------------------------- Marginal

o +50.1 to +2000 mOhms --------------------------------- 0 Points ------------------------- Unstable

o >+2000 mOhms ------------------------------------------ 0 Points ------------------------- Open Failure

Thermal







o

Humidity







LLCR Gas Tight (192 LLCR test points)

Initial ----------------------------------------------------------------- 6.1mOhms Max

Gas-Tight









of 53

DATA SUMMARIES

TEMPERATURE RISE (Current Carrying Capacity, CCC):

1) High quality thermocouples whose temperature slopes track one another were used for temperature

monitoring. 2) The thermocouples were placed at a location to sense the maximum temperature generated during testing. 3) Temperature readings recorded are those for which three successive readings, 15 minutes apart, differ less

than 1° C (computer controlled data acquisition).

4) Adjacent contacts were powered:

a. Linear configuration with 2 adjacent conductors/contacts powered

TC0935--2714

2(2x1) Contacts in Linear series

Part Numbers:SSM-136-S-DV/TSM-136-01-S-DV-A

12.812.8

10.310.3

7.87.8

6.36.36.76.7

5.45.4

3.73.7

2.92.9

0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

20 40 60 80 100 120 140

Ambient Temperature, ° C

Max

imu

m C

urr

en

t, A

mp

per

Co

nta

ct

Base Curve

Derated 20 %

RT Peak Amp

RT Derated Amp

Measured Current

85 ° C

85 ° C Peak Amp

85 ° C Derated Amp

95 ° C

95 ° C Peak Amp

95 ° C Derated Amp

Limit

115 ° C Peak Amp

115 ° C Derated Amp

115 ° C

Room Temp125° C

Limit

Useful Range

Room Temp=23.1 C

Current Rating per Contact (30 Deg. Rise, 20% Derated) = 5.4Amps



of 53

DATA SUMMARIES Continued

b. Linear configuration with 4 adjacent conductors/contacts powered

TC0935--2714



9.29.2

7.47.4

5.75.7

4.64.64.94.9

3.93.9

2.82.8

2.22.2

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

20 40 60 80 100 120 140


Ma

xim

um

Cu

rre

nt,

Am

p p

er

Co

nta

ct

Base Curve

Derated 20 %

RT Peak Amp

RT Derated Amp

Measured Current

85 ° C

85 ° C Peak Amp

85 ° C Derated Amp

95 ° C

95 ° C Peak Amp

95 ° C Derated Amp

Limit

115 ° C Peak Amp


115 ° C

Room Temp125° C

Limit

Useful Range

Room Temp= 25.2 C

Current Rating per Contact (30 Deg. Rise, 20% Derated) = 3.9 Amps



of 53


c. Linear configuration with 6 adjacent conductors/contacts powered

TC0935--2714



8.18.1

6.56.5

5.05.0

4.04.04.34.3

3.43.4

2.42.4

1.91.9

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

20 40 60 80 100 120 140


Ma

xim

um

Cu

rre

nt,

Am

p p

er

Co

nta

ct

Base Curve

Derated 20 %

RT Peak Amp

RT Derated Amp

Measured Current

85 ° C

85 ° C Peak Amp

85 ° C Derated Amp

95 ° C

95 ° C Peak Amp

95 ° C Derated Amp

Limit

115 ° C Peak Amp


115 ° C

Room Temp125° C

Limit

Useful Range

Room Temp=23.4 C




of 53


d. Linear configuration with 8 adjacent conductors/contacts powered

TC0935--2714



7.57.5

6.06.0

4.64.6

3.73.73.93.9

3.23.2

2.22.2

1.71.7

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

20 40 60 80 100 120 140


Max

imu

m C

urr

en

t, A

mp

per

Co

nta

ct

Base Curve

Derated 20 %

RT Peak Amp

RT Derated Amp

Measured Current

85 ° C

85 ° C Peak Amp

85 ° C Derated Amp

95 ° C

95 ° C Peak Amp

95 ° C Derated Amp

Limit

115 ° C Peak Amp


115 ° C

Room Temp125° C

Limit

Useful Range

Room Temp= 21.9 C




of 53


e. Linear configuration with all adjacent conductors/contacts powered

TC0935--2714

72(all) Contacts in Linear series


5.05.0

4.04.0

3.03.0

2.42.42.52.5

2.02.0

1.31.3

1.11.1

0.0

1.0

2.0

3.0

4.0

5.0

6.0

20 40 60 80 100 120 140


Max

imu

m C

urr

en

t, A

mp

per

Co

nta

ct

Base Curve

Derated 20 %

RT Peak Amp

RT Derated Amp

Measured Current

85 ° C

85 ° C Peak Amp

85 ° C Derated Amp

95 ° C

95 ° C Peak Amp

95 ° C Derated Amp

Limit

115 ° C Peak Amp


115 ° C

Room Temp125° C

Limit

Useful Range

Room Temp= 23.8 C

Current Rating per Contact (30 Deg. Rise, 20% Derated) = 2.0 Amps



of 53


CONTACT GAPS:

2 Position

Units: inches Units: inches Units: inches

0.0161 0.0171 0.0175

0.0180 0.0184 0.0192

0.0172 0.0179 0.0183

0.0003 0.0003 0.0004

40 40 40

St. Dev.St. Dev.

After Thermal

Count

MinimumMinimum

Maximum

Average

Maximum

Average

Count

After 100 Cycles

St. Dev.

Count

Initial

Minimum

Maximum

Average

20 Position


0.0164 0.0169 0.0176

0.0178 0.0183 0.0187

0.0172 0.0176 0.0181

0.0002 0.0002 0.0002

400 400 400

St. Dev.St. Dev.

After Thermal

Count

MinimumMinimum

Maximum

Average

Maximum

Average

Count

After 100 Cycles

St. Dev.

Count

Initial

Minimum

Maximum

Average

36 Position


0.0162 0.0163 0.0172

0.0181 0.0184 0.0187

0.0175 0.0177 0.0180

0.0003 0.0003 0.0003

720 720 720

St. Dev.St. Dev.

After Thermal

Count

MinimumMinimum

Maximum

Average

Maximum

Average

Count

After 100 Cycles

St. Dev.

Count

Initial

Minimum

Maximum

Average



of 53


MATING/UNMATING:

2 Position

Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)

Minimum 12.8 0.80 7.2 0.45 11.5 0.72 7.0 0.44

Maximum 15.2 1.0 13.8 0.9 13.3 0.8 11.5 0.7

Average 13.5 0.8 10.8 0.7 12.3 0.8 9.9 0.6


Minimum 11.2 0.70 6.9 0.43 10.7 0.67 6.9 0.43

Maximum 12.2 0.8 10.9 0.7 11.5 0.7 10.1 0.6

Average 11.6 0.7 9.3 0.6 11.1 0.7 8.9 0.6


Minimum 10.1 0.63 6.9 0.43 8.6 0.54 7.2 0.45

Maximum 11.5 0.7 9.9 0.6 10.2 0.6 8.3 0.5

Average 10.7 0.7 8.8 0.5 9.3 0.6 7.9 0.5

Force (Oz) Force (Lbs) Force (Oz) Force (Lbs)

Minimum 8.0 0.50 7.0 0.44

Maximum 9.8 0.6 7.8 0.5

Average 8.8 0.5 7.5 0.5

After Humidity

Mating Unmating

After 100 Cycles

After 50 Cycles

Mating

After Thermals

Mating Unmating Mating Unmating

Unmating

After 25 Cycles

Mating Mating Unmating

Initial

After 75 Cycles

Mating UnmatingUnmating



of 53


20 Position


Minimum 119.0 7.44 105.6 6.60 106.7 6.67 97.6 6.10

Maximum 153.8 9.6 133.0 8.3 150.2 9.4 112.3 7.0

Average 132.5 8.3 118.0 7.4 127.4 8.0 104.9 6.6


Minimum 104.6 6.54 96.3 6.02 102.6 6.41 95.8 5.99

Maximum 146.1 9.1 109.3 6.8 144.3 9.0 106.7 6.7

Average 125.0 7.8 103.1 6.4 123.3 7.7 101.5 6.3


Minimum 99.5 6.22 93.6 5.85 100.3 6.27 82.4 5.15

Maximum 141.9 8.9 108.0 6.8 127.2 8.0 102.1 6.4

Average 121.5 7.6 100.1 6.3 111.8 7.0 91.6 5.7


Minimum 97.8 6.11 82.2 5.14

Maximum 128.0 8.0 109.8 6.9

Average 110.0 6.9 92.8 5.8

After 75 Cycles


Unmating

After 25 Cycles


Initial

After Thermals


After Humidity

Mating Unmating

After 100 Cycles

After 50 Cycles

Mating



of 53


36 Position


Minimum 246.2 15.39 204.6 12.79 240.5 15.03 187.7 11.73

Maximum 333.3 20.8 232.2 14.5 310.6 19.4 217.9 13.6

Average 274.6 17.2 218.8 13.7 263.2 16.4 203.8 12.7


Minimum 236.6 14.79 174.4 10.90 234.1 14.63 169.3 10.58

Maximum 289.8 18.1 197.0 12.3 281.3 17.6 194.2 12.1

Average 255.4 16.0 188.0 11.7 249.2 15.6 184.2 11.5


Minimum 226.9 14.18 168.5 10.53 199.0 12.44 163.0 10.19

Maximum 274.1 17.1 190.1 11.9 227.4 14.2 191.4 12.0

Average 240.0 15.0 181.0 11.3 207.8 13.0 179.8 11.2


Minimum 195.0 12.19 163.7 10.23

Maximum 238.6 14.9 198.6 12.4

Average 209.3 13.1 183.6 11.5

After Humidity

Mating Unmating

After 100 Cycles

After 50 Cycles

Mating

After Thermals


Unmating

After 25 Cycles


Initial

After 75 Cycles




of 53


NORMAL FORCE (FOR CONTACTS TESTED OUTSIDE THE HOUSING): 1) Calibrated force gauges are used along with computer controlled positioning equipment.

2) Typically, 8-10 readings are taken and the averages reported.

0.040 0.060 0.080 0.100 0.120 SET

Averages 48.77 71.38 94.15 116.23 139.00 0.0058

Min 43.00 64.00 88.00 109.00 130.00 0.0010

Max 55.00 79.00 101.00 125.00 148.00 0.0100

St. Dev 3.37 4.11 4.26 4.66 5.46 0.0033

Count 13 13 13 13 13 13

InitialDeflections in mm Forces in Grams

0.040 0.060 0.080 0.100 0.120 SET

Averages 47.85 71.31 92.85 114.46 138.08 0.0025

Min 40.00 62.00 81.00 101.00 122.00 0.0000

Max 53.00 78.00 102.00 125.00 146.00 0.0100

St. Dev 4.24 5.12 6.45 6.50 6.55 0.0032

Count 13 13 13 13 13 13

ThermalDeflections in mm, Forces in Grams



of 53


INSULATION RESISTANCE (IR):

DIELECTRIC WITHSTANDING VOLTAGE (DWV):



of 53


LLCR: 1) A total of 192 points were measured.



4) The following guidelines are used to categorize the changes in LLCR as a result from stressing.

a. <= +5.0 mOhms: ----------------------------- Stable

b. +5.1 to +10.0 mOhms: ---------------------- Minor



e. +50.1 to +2000 mOhms -------------------- Unstable


Date Sep. 07 2009 Sep. 07 2009 Sep. 18 2009 Sep. 29 2009

Room Temp C 25 27 24 21

RH 51% 49% 60% 54%

Name Kason He Kason He Kason He Kason He

mOhm values Actual Delta Delta Delta

Initial 100 Cycles Thermal Humidity

Average 5.2 -0.1 0.1 0.5

St. Dev. 0.5 0.3 0.4 1.1

Min 4.1 -1.3 -1.3 -1.4

Max 6.6 1.5 1.6 5.7

Count 192 192 192 192

8

24

Stable Minor Acceptable Marginal Unstable Open

100 Cycles 192 0 0 0 0 0

Thermal 192 0 0 0 0 0

Humidity 191 1 0 0 0 0

How many samples are being tested?

How many contacts are on each board?



of 53


GAS TIGHT: 1) A total of 192 points were measured.



4) The following guidelines are used to categorize the changes in LLCR as a result from stressing.

a. <= +5.0 mOhms: ----------------------------- Stable

b. +5.1 to +10.0 mOhms: ---------------------- Minor





Date Sep. 07 2009 Sep. 16 2009

Room Temp C 25 26

RH 51% 64%

Name Kason He Kason He

mOhm values Actual Delta

Initial Gas Tight

Average 5.2 -0.1

St. Dev. 0.4 0.2

Min 4.1 -0.9

Max 6.1 0.4

Count 192 192

8

24

Stable Minor Acceptable Marginal Unstable Open

Gas Tight 192 0 0 0 0 0

How many samples are being tested?

How many contacts are on each board?



of 53

DATA

CONTACT GAPS:

2 Position

Initial

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.017344 0.016865 0.016909 0.017418 0.017053 0.01759 0.017154 0.017592 0.017125 0.016972

2 0.017787 0.01713 0.017016 0.017245 0.01772 0.016979 0.017099 0.017238 0.016934 0.017008

3 0.017235 0.017388 0.016113 0.017345 0.017322 0.017268 0.017125 0.017378 0.017988 0.017327

4 0.017307 0.016806 0.01698 0.017155 0.017307 0.017429 0.017153 0.017207 0.017042 0.017161

After 100 cycles

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.018044 0.018026 0.018094 0.017994 0.017863 0.018118 0.018089 0.018071 0.018188 0.017702

2 0.017263 0.01796 0.018165 0.017507 0.017694 0.018398 0.018122 0.017862 0.018254 0.018077

3 0.01772 0.017496 0.018111 0.017117 0.017649 0.018422 0.017531 0.018189 0.017777 0.018055

4 0.017674 0.017741 0.017898 0.017501 0.017743 0.018038 0.01758 0.017844 0.017698 0.017477

After Thermal

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.018196 0.019164 0.017844 0.018302 0.018263 0.017489 0.018013 0.01838 0.018599 0.018593

2 0.018344 0.019017 0.017508 0.01834 0.018356 0.017788 0.018373 0.018221 0.018648 0.018159

3 0.018136 0.019181 0.018557 0.018283 0.017929 0.017679 0.018422 0.018064 0.018217 0.018839

4 0.017678 0.018745 0.018329 0.018234 0.017975 0.017748 0.017991 0.018419 0.018318 0.019111

20 Position

Initial

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.017511 0.017468 0.017081 0.017269 0.017344 0.016998 0.017494 0.01695 0.016899 0.017324

2 0.016682 0.01705 0.017091 0.016912 0.016965 0.017411 0.017517 0.017239 0.017373 0.017319

3 0.017393 0.016819 0.017183 0.017269 0.016973 0.017262 0.017232 0.017236 0.017015 0.017369

4 0.016916 0.017049 0.017076 0.016866 0.017406 0.017436 0.017271 0.01741 0.017342 0.017372

5 0.017606 0.016648 0.017275 0.017252 0.017284 0.017172 0.017154 0.017054 0.017029 0.017387

6 0.016836 0.017017 0.017103 0.016914 0.017051 0.017323 0.017338 0.01737 0.017553 0.017333

7 0.017476 0.017159 0.017187 0.017315 0.01704 0.016915 0.017261 0.017162 0.016962 0.017445

8 0.016765 0.017014 0.017196 0.016916 0.017035 0.017311 0.016778 0.017356 0.017245 0.017331

9 0.017576 0.017527 0.017249 0.017148 0.017637 0.017096 0.01727 0.016994 0.017049 0.017394

10 0.016739 0.016839 0.017118 0.016809 0.017658 0.017337 0.017335 0.017472 0.01728 0.01732

11 0.017434 0.016711 0.017289 0.017203 0.017424 0.017233 0.016916 0.017051 0.017092 0.017422

12 0.01682 0.017079 0.017249 0.016922 0.017067 0.017227 0.017227 0.017224 0.017263 0.017141

13 0.017536 0.017291 0.017261 0.017231 0.01722 0.017128 0.017355 0.016966 0.01698 0.017418

14 0.01672 0.016638 0.017205 0.016877 0.017106 0.017239 0.01717 0.017432 0.01733 0.017207

15 0.017553 0.016724 0.017283 0.017357 0.017145 0.017046 0.017321 0.016884 0.017098 0.017334

16 0.016848 0.01733 0.01703 0.016899 0.016876 0.017197 0.016625 0.017272 0.017475 0.017384

17 0.016651 0.016625 0.017349 0.017223 0.01698 0.017163 0.016927 0.016935 0.016908 0.017534

18 0.016739 0.016601 0.016954 0.016918 0.016896 0.017312 0.017367 0.017394 0.017372 0.017335

19 0.017448 0.016781 0.017359 0.017349 0.01729 0.017031 0.017232 0.016945 0.017004 0.017186

20 0.016816 0.016961 0.016997 0.016825 0.016704 0.017263 0.017231 0.017137 0.01748 0.017389

21 0.016873 0.016559 0.017311 0.016876 0.017382 0.017209 0.017469 0.017235 0.0173 0.017042

22 0.017336 0.017042 0.017284 0.017373 0.017198 0.017036 0.017283 0.016814 0.016977 0.017409

23 0.016849 0.016796 0.017345 0.016923 0.017172 0.017257 0.017279 0.017303 0.017274 0.01707

24 0.017462 0.016777 0.017403 0.01721 0.016913 0.016938 0.017294 0.01678 0.016897 0.017625



of 53

25 0.016814 0.016817 0.01727 0.01682 0.017072 0.017199 0.017394 0.017284 0.017161 0.01726

26 0.017475 0.01699 0.01724 0.017294 0.016926 0.01689 0.017316 0.016912 0.016908 0.017327

27 0.016725 0.016504 0.017201 0.016953 0.017041 0.017178 0.017406 0.017254 0.017215 0.017248

28 0.017527 0.01655 0.017281 0.017454 0.016927 0.017032 0.0174 0.016927 0.016982 0.017507

29 0.016779 0.016491 0.017156 0.016996 0.017431 0.017212 0.017319 0.017109 0.017235 0.017316

30 0.017387 0.016598 0.017476 0.017512 0.016888 0.017088 0.017316 0.016938 0.017035 0.017431

31 0.016702 0.016433 0.01722 0.016915 0.017037 0.017256 0.017443 0.017125 0.017355 0.017099

32 0.0175 0.017324 0.01735 0.017514 0.016851 0.01706 0.017451 0.016934 0.016948 0.017329

33 0.01667 0.01753 0.017001 0.016784 0.017146 0.017273 0.017465 0.017215 0.017239 0.017288

34 0.01744 0.017491 0.01755 0.017447 0.017171 0.016982 0.017278 0.016898 0.017015 0.017297

35 0.016685 0.017165 0.01701 0.016872 0.017125 0.017372 0.017423 0.017304 0.017293 0.01742

36 0.017406 0.016781 0.017349 0.017347 0.01753 0.017056 0.017388 0.017061 0.016855 0.017534

37 0.01663 0.017374 0.017432 0.016964 0.017371 0.017201 0.017491 0.017311 0.017443 0.017237

38 0.017447 0.017085 0.01781 0.017378 0.017425 0.016938 0.017259 0.016927 0.017058 0.01735

39 0.016659 0.017174 0.017326 0.017034 0.017085 0.017235 0.017396 0.017237 0.017315 0.017069

40 0.017323 0.016739 0.017234 0.017365 0.017251 0.016962 0.0173 0.016974 0.017028 0.017253

After 100 cycles

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.018323 0.017721 0.018022 0.017911 0.017541 0.017552 0.017771 0.017774 0.017472 0.017964

2 0.017502 0.017587 0.017742 0.017527 0.017912 0.017918 0.018072 0.017886 0.017886 0.017914

3 0.018088 0.017826 0.017792 0.017918 0.017752 0.017757 0.017884 0.017813 0.017521 0.017936

4 0.017581 0.017464 0.017689 0.017348 0.017899 0.017888 0.017738 0.017967 0.01779 0.017963

5 0.01802 0.017785 0.017688 0.017626 0.017498 0.0175 0.017661 0.017479 0.01743 0.017814

6 0.017319 0.017322 0.017462 0.017305 0.01761 0.017617 0.017712 0.017723 0.01783 0.017729

7 0.017798 0.01758 0.017498 0.017639 0.017365 0.017379 0.017612 0.017474 0.017258 0.017758

8 0.017166 0.017344 0.017434 0.017265 0.017564 0.01757 0.017638 0.017702 0.017545 0.017618

9 0.017827 0.017498 0.017515 0.017514 0.01736 0.017368 0.017512 0.017285 0.017381 0.017717

10 0.017025 0.017352 0.017432 0.017147 0.017561 0.017552 0.017586 0.017717 0.017529 0.017566

11 0.017695 0.017546 0.01753 0.017527 0.017534 0.01754 0.017407 0.017334 0.017358 0.017648

12 0.01711 0.017226 0.01754 0.017263 0.017474 0.017482 0.017485 0.017501 0.01752 0.01743

13 0.017845 0.01775 0.017532 0.017543 0.017441 0.017449 0.017567 0.017312 0.017314 0.017746

14 0.017087 0.01722 0.017459 0.017236 0.017573 0.01758 0.017463 0.017744 0.017596 0.017538

15 0.017969 0.017668 0.017596 0.017722 0.01756 0.017567 0.017428 0.017356 0.017529 0.017674

16 0.017169 0.017309 0.017532 0.017349 0.017615 0.017628 0.017803 0.01762 0.0177 0.017743

17 0.017955 0.017674 0.017786 0.017645 0.017729 0.01774 0.017629 0.017396 0.017293 0.017968

18 0.017145 0.017461 0.017585 0.017504 0.017718 0.01772 0.017881 0.017707 0.017677 0.017911

19 0.018014 0.017773 0.01778 0.017973 0.017678 0.01769 0.017919 0.017403 0.017508 0.017806

20 0.017405 0.017739 0.018086 0.017758 0.017964 0.017994 0.017888 0.0176 0.017911 0.01819

21 0.017628 0.017274 0.017882 0.017628 0.01766 0.017661 0.017855 0.01783 0.017774 0.017997

22 0.017997 0.017506 0.017791 0.017854 0.017614 0.017613 0.018024 0.017505 0.017533 0.018031

23 0.017513 0.017159 0.017833 0.017456 0.017622 0.01763 0.017952 0.017848 0.017702 0.01775

24 0.017897 0.017935 0.017804 0.017481 0.017499 0.017503 0.017822 0.017468 0.017419 0.018045

25 0.017159 0.017105 0.017639 0.017103 0.017478 0.01748 0.017711 0.017617 0.017513 0.017612

26 0.017698 0.017525 0.017568 0.01747 0.017284 0.017285 0.017515 0.017198 0.017342 0.017651

27 0.017008 0.017115 0.017533 0.017183 0.017361 0.017362 0.017684 0.017465 0.017467 0.017558

28 0.01769 0.017493 0.01753 0.017584 0.017307 0.017308 0.017595 0.01721 0.017306 0.017739

29 0.016983 0.017046 0.017369 0.017174 0.017401 0.017407 0.017541 0.01733 0.01745 0.017556

30 0.017572 0.017965 0.017611 0.017678 0.017333 0.017324 0.017495 0.017165 0.017302 0.017637

31 0.016921 0.017106 0.017468 0.017123 0.017483 0.017487 0.017594 0.017314 0.017545 0.01733



of 53

32 0.017658 0.017406 0.017559 0.017673 0.017255 0.017261 0.017644 0.017139 0.017166 0.017555

33 0.016954 0.017145 0.017252 0.017097 0.017528 0.017532 0.017712 0.017451 0.017473 0.017505

34 0.017697 0.017879 0.017703 0.017663 0.017262 0.017255 0.01757 0.017153 0.017258 0.01759

35 0.017048 0.017197 0.017323 0.017223 0.017693 0.017693 0.017713 0.017652 0.017544 0.017738

36 0.017803 0.017568 0.017716 0.017771 0.017366 0.017362 0.017779 0.017385 0.01719 0.017858

37 0.016976 0.017279 0.017524 0.017589 0.017542 0.017539 0.017868 0.017691 0.017797 0.017732

38 0.017882 0.017683 0.017939 0.01802 0.017564 0.017556 0.017941 0.017352 0.017496 0.017858

39 0.017075 0.017389 0.017921 0.017816 0.017734 0.017735 0.018014 0.017578 0.017653 0.017848

40 0.017845 0.017919 0.017906 0.018042 0.017565 0.017571 0.018154 0.017574 0.017657 0.017899

After Thermal

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.018739 0.018213 0.018407 0.018365 0.018167 0.018079 0.01834 0.018251 0.017954 0.018388

2 0.018009 0.018107 0.018175 0.018047 0.017742 0.018391 0.018571 0.018361 0.018313 0.018335

3 0.018506 0.018321 0.01822 0.018435 0.018122 0.018195 0.018425 0.018311 0.018014 0.018347

4 0.018063 0.017937 0.018082 0.017876 0.017827 0.018309 0.018246 0.018381 0.018264 0.018396

5 0.018433 0.018251 0.01813 0.018104 0.018116 0.017977 0.018216 0.017964 0.017942 0.018256

6 0.0178 0.017822 0.017888 0.0178 0.017856 0.018056 0.01823 0.018175 0.018275 0.01821

7 0.01821 0.017997 0.017925 0.018132 0.018112 0.017885 0.01815 0.017968 0.017788 0.018184

8 0.017668 0.017835 0.017932 0.017783 0.017914 0.018046 0.018084 0.018177 0.018036 0.018134

9 0.018256 0.017982 0.017946 0.018025 0.018045 0.01786 0.018079 0.017817 0.017871 0.018162

10 0.017571 0.017819 0.017873 0.017677 0.018023 0.018012 0.018091 0.018196 0.018003 0.018059

11 0.018134 0.01796 0.017977 0.01804 0.018237 0.017991 0.017971 0.017811 0.017848 0.018094

12 0.017624 0.017701 0.017976 0.017778 0.018065 0.017956 0.017942 0.017918 0.018023 0.01794

13 0.018273 0.018162 0.017965 0.018045 0.018379 0.017933 0.018103 0.017803 0.017814 0.018208

14 0.017598 0.017644 0.017965 0.017799 0.018112 0.01801 0.017941 0.018214 0.018113 0.018039

15 0.01834 0.01806 0.018055 0.018281 0.018331 0.018042 0.017945 0.017838 0.018013 0.018134

16 0.017667 0.017765 0.017988 0.017895 0.01829 0.018069 0.01825 0.018064 0.018229 0.018222

17 0.018365 0.018091 0.018201 0.018126 0.018484 0.018183 0.018131 0.017874 0.017846 0.018411

18 0.017649 0.017904 0.018048 0.018015 0.018392 0.01818 0.018348 0.018197 0.018161 0.018389

19 0.01845 0.018186 0.018238 0.018482 0.018663 0.018076 0.018425 0.017889 0.017975 0.018272

20 0.017919 0.018187 0.018549 0.018246 0.018708 0.01837 0.018284 0.01805 0.018376 0.018629

21 0.018205 0.017847 0.018391 0.018224 0.017983 0.018191 0.018411 0.018371 0.018316 0.018586

22 0.018551 0.018073 0.018318 0.018439 0.017946 0.018165 0.018693 0.018087 0.018083 0.018573

23 0.018079 0.017738 0.018304 0.018051 0.017991 0.018192 0.018477 0.01844 0.018297 0.018377

24 0.018421 0.018204 0.018294 0.018074 0.018036 0.018085 0.018429 0.018023 0.018014 0.018593

25 0.017748 0.017698 0.018144 0.017718 0.017988 0.01804 0.018257 0.01816 0.018093 0.018199

26 0.018231 0.01805 0.018114 0.018052 0.018112 0.017853 0.018236 0.01777 0.017915 0.018202

27 0.017614 0.017657 0.018067 0.017789 0.018021 0.017966 0.018236 0.01802 0.018046 0.018167

28 0.018236 0.017984 0.018035 0.018175 0.018076 0.017903 0.018256 0.017846 0.017907 0.018303

29 0.017623 0.017666 0.017945 0.017814 0.017999 0.017981 0.018083 0.017912 0.018059 0.018147

30 0.018155 0.018021 0.018144 0.018253 0.018152 0.017892 0.018226 0.017725 0.017907 0.018209

31 0.017565 0.017656 0.017978 0.017718 0.017936 0.018031 0.018133 0.017929 0.018126 0.017954

32 0.018262 0.017915 0.018114 0.018227 0.01803 0.017844 0.018258 0.017776 0.017747 0.018136

33 0.017611 0.017678 0.017871 0.017733 0.018031 0.01808 0.018241 0.01804 0.018041 0.018115

34 0.0183 0.018024 0.018249 0.018243 0.018069 0.017818 0.018169 0.017742 0.017853 0.018153

35 0.017672 0.017754 0.017855 0.017807 0.018075 0.018214 0.018245 0.018218 0.018096 0.018325

36 0.01834 0.018104 0.018264 0.018366 0.018113 0.017921 0.018356 0.017975 0.017742 0.018376

37 0.017595 0.017814 0.018073 0.018143 0.018126 0.018093 0.01838 0.01826 0.018306 0.018283



of 53

38 0.018412 0.018231 0.018436 0.018572 0.01836 0.0181 0.018491 0.017911 0.018037 0.018395

39 0.017741 0.017915 0.018386 0.018418 0.018491 0.018277 0.018518 0.018139 0.018201 0.018418

40 0.018439 0.018391 0.018424 0.018598 0.018108 0.018164 0.018684 0.018137 0.018184 0.018414

36 Position

Initial

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.017346 0.017429 0.01662 0.016539 0.01743 0.01755 0.016707 0.017453 0.017165 0.017678

2 0.016982 0.017176 0.016601 0.017632 0.016923 0.017406 0.017045 0.017235 0.017428 0.017399

3 0.017482 0.017287 0.016998 0.017536 0.017601 0.017662 0.016783 0.017493 0.017408 0.017928

4 0.017104 0.017351 0.017616 0.017648 0.01716 0.017431 0.018074 0.01721 0.017502 0.016484

5 0.017633 0.016501 0.017001 0.016935 0.017713 0.017832 0.017408 0.017604 0.017441 0.017775

6 0.017148 0.017459 0.017639 0.017829 0.017202 0.017614 0.017956 0.01727 0.017549 0.016763

7 0.017554 0.017998 0.017098 0.017364 0.017909 0.017745 0.017455 0.017638 0.017242 0.017724

8 0.017139 0.017619 0.017593 0.017825 0.017084 0.017602 0.017948 0.017504 0.01747 0.016356

9 0.017609 0.017878 0.016774 0.016785 0.017879 0.017819 0.017535 0.017549 0.01737 0.017821

10 0.017209 0.017434 0.017683 0.017785 0.017061 0.017633 0.017999 0.017514 0.017625 0.017409

11 0.017512 0.017884 0.017131 0.016949 0.017783 0.017717 0.017518 0.017869 0.017502 0.017828

12 0.017178 0.017457 0.017705 0.017919 0.017091 0.017816 0.018107 0.017607 0.017458 0.017542

13 0.017643 0.017981 0.01703 0.017379 0.017693 0.017913 0.017363 0.017247 0.017627 0.017871

14 0.017064 0.017447 0.017712 0.018036 0.017149 0.017526 0.018066 0.017483 0.017651 0.017208

15 0.017604 0.017825 0.017118 0.01663 0.017598 0.017825 0.017361 0.017911 0.017514 0.017857

16 0.017275 0.017437 0.017688 0.018038 0.017199 0.017754 0.01733 0.017426 0.017656 0.017351

17 0.017472 0.016796 0.017164 0.016385 0.017774 0.017846 0.017563 0.017098 0.017639 0.018015

18 0.017256 0.017419 0.016828 0.017973 0.017367 0.017719 0.017204 0.017501 0.017709 0.016794

19 0.01766 0.01798 0.017225 0.016548 0.017837 0.017813 0.017581 0.017514 0.017856 0.018103

20 0.017264 0.017617 0.01787 0.018104 0.017314 0.017741 0.017217 0.017354 0.01765 0.016707

21 0.017725 0.017237 0.017191 0.016832 0.01775 0.017837 0.017585 0.017255 0.017797 0.017958

22 0.01734 0.017622 0.017894 0.017976 0.017352 0.017712 0.018034 0.016937 0.017183 0.017465

23 0.017695 0.017284 0.017356 0.016743 0.017778 0.017762 0.017457 0.017139 0.017677 0.017972

24 0.017414 0.017534 0.01721 0.017267 0.01724 0.017642 0.017211 0.016915 0.017534 0.017686

25 0.017656 0.017183 0.017291 0.016669 0.017821 0.017854 0.016792 0.017162 0.017587 0.01804

26 0.017524 0.01768 0.01729 0.018062 0.017233 0.017696 0.017225 0.017542 0.017639 0.017491

27 0.017814 0.017064 0.017494 0.016159 0.017877 0.017964 0.017737 0.017001 0.017744 0.01785

28 0.017505 0.01746 0.017948 0.018099 0.017259 0.017638 0.018116 0.017483 0.017575 0.016654

29 0.017629 0.017107 0.016971 0.016497 0.017922 0.017992 0.017637 0.016985 0.017454 0.017803

30 0.017427 0.017348 0.017566 0.017893 0.0171 0.017598 0.018045 0.01746 0.016923 0.017272

31 0.017558 0.01707 0.016716 0.016607 0.017741 0.017692 0.01761 0.017897 0.017566 0.017933

32 0.017412 0.01741 0.016435 0.018009 0.01725 0.017529 0.017221 0.017466 0.017549 0.01715

33 0.01763 0.017929 0.016959 0.017631 0.017643 0.017787 0.017428 0.01789 0.017628 0.017833

34 0.017307 0.017354 0.017727 0.017889 0.01726 0.017574 0.018047 0.017515 0.017242 0.016941

35 0.017488 0.017962 0.016837 0.016601 0.017653 0.017747 0.017686 0.016793 0.017832 0.018035

36 0.017246 0.017089 0.017754 0.017917 0.016957 0.017533 0.017985 0.017334 0.017423 0.017163

37 0.016872 0.017617 0.017653 0.017186 0.017115 0.017323 0.017656 0.017064 0.017363 0.016891

38 0.016464 0.017765 0.01733 0.017139 0.01753 0.017656 0.017263 0.017521 0.017347 0.016523

39 0.017011 0.01755 0.017569 0.017063 0.017056 0.017465 0.017689 0.017261 0.017458 0.017071

40 0.016854 0.017571 0.017262 0.017349 0.017541 0.017725 0.01729 0.017507 0.0173 0.016895

41 0.016619 0.017329 0.017683 0.016891 0.017196 0.017618 0.017739 0.017482 0.017616 0.016921

42 0.017556 0.017676 0.017194 0.017456 0.017486 0.017672 0.017125 0.017647 0.01732 0.01795



of 53

43 0.017168 0.017252 0.017686 0.017286 0.017114 0.017526 0.017913 0.017348 0.017473 0.017047

44 0.017517 0.01784 0.017312 0.017449 0.017698 0.017736 0.017348 0.017605 0.017472 0.016597

45 0.017222 0.017593 0.017847 0.01702 0.017283 0.017483 0.017989 0.017492 0.017694 0.017039

46 0.017604 0.017748 0.017533 0.017515 0.017545 0.017761 0.017283 0.017759 0.017448 0.01683

47 0.016831 0.017429 0.017881 0.017173 0.017403 0.017482 0.018043 0.017092 0.017859 0.017127

48 0.017458 0.017622 0.017187 0.017412 0.017695 0.017596 0.0173 0.017768 0.017451 0.016643

49 0.017149 0.017234 0.017768 0.017331 0.017317 0.017459 0.017311 0.017576 0.017706 0.017005

50 0.017525 0.01797 0.016661 0.017615 0.017856 0.01759 0.017302 0.017886 0.017673 0.01722

51 0.017161 0.017085 0.017712 0.017105 0.017424 0.01758 0.017334 0.017444 0.017727 0.017118

52 0.017479 0.017708 0.017199 0.017577 0.017867 0.017591 0.01728 0.017828 0.017662 0.017139

53 0.017187 0.017453 0.017699 0.017069 0.017361 0.017369 0.017299 0.017346 0.01764 0.017183

54 0.017529 0.017648 0.017134 0.017648 0.017786 0.017536 0.017271 0.017776 0.01758 0.016843

55 0.017061 0.017434 0.017727 0.018002 0.017228 0.017508 0.017819 0.017458 0.017712 0.017114

56 0.01756 0.017833 0.016181 0.01747 0.017786 0.017455 0.017364 0.017888 0.017771 0.016916

57 0.017247 0.017411 0.01763 0.017897 0.01722 0.017572 0.01724 0.017436 0.017665 0.017006

58 0.017751 0.01787 0.017429 0.017331 0.017821 0.017618 0.01733 0.017765 0.017676 0.017262

59 0.01732 0.017924 0.017872 0.018053 0.017342 0.017405 0.017759 0.0175 0.017696 0.017021

60 0.01769 0.017651 0.017338 0.017595 0.017729 0.017465 0.017339 0.01785 0.017601 0.017115

61 0.017231 0.017583 0.01771 0.017383 0.01733 0.017459 0.017884 0.017584 0.017803 0.017222

62 0.017851 0.017878 0.017471 0.017707 0.017655 0.017713 0.017324 0.017871 0.017522 0.016923

63 0.017085 0.017847 0.017986 0.017586 0.017179 0.017661 0.01795 0.017287 0.017795 0.017068

64 0.017526 0.017641 0.017349 0.017459 0.017792 0.017545 0.017313 0.017857 0.017555 0.017163

65 0.01711 0.017383 0.017689 0.017105 0.017275 0.017335 0.01784 0.017482 0.017788 0.016937

66 0.017653 0.017686 0.01732 0.017262 0.017706 0.017527 0.017414 0.017883 0.017526 0.017148

67 0.017184 0.017147 0.017753 0.017536 0.017339 0.017274 0.017961 0.017381 0.017685 0.017033

68 0.017525 0.017472 0.017359 0.017357 0.017568 0.017597 0.017358 0.017851 0.017401 0.017072

69 0.017049 0.017364 0.01776 0.01722 0.017261 0.017396 0.017733 0.017568 0.017658 0.016982

70 0.017343 0.017633 0.017254 0.017475 0.017577 0.017626 0.01735 0.017865 0.017515 0.017305

71 0.016944 0.017289 0.017675 0.017536 0.017074 0.017451 0.017702 0.017241 0.01756 0.017035

72 0.017242 0.017696 0.017072 0.01727 0.017591 0.017503 0.017021 0.017964 0.017675 0.016213

After 100 cycles

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.01748 0.018162 0.01709 0.017334 0.017542 0.017327 0.017559 0.017249 0.017312 0.017863

2 0.017105 0.017352 0.017608 0.017699 0.017062 0.018093 0.01725 0.017526 0.018065 0.017252

3 0.017543 0.018024 0.017108 0.017363 0.017728 0.017296 0.017536 0.017499 0.017278 0.018046

4 0.017107 0.017398 0.017631 0.017688 0.017231 0.018089 0.017236 0.017604 0.018067 0.017494

5 0.017557 0.018083 0.01705 0.017537 0.017785 0.017344 0.017629 0.017522 0.017321 0.017937

6 0.017141 0.017463 0.017672 0.017861 0.017226 0.017966 0.017312 0.017632 0.017952 0.017536

7 0.017522 0.01793 0.017134 0.017393 0.017912 0.017538 0.017667 0.017316 0.017533 0.017773

8 0.017172 0.01758 0.017599 0.017851 0.017168 0.018077 0.017532 0.017596 0.018071 0.01748

9 0.017625 0.017862 0.017239 0.017407 0.017852 0.017487 0.017632 0.017439 0.017475 0.017929

10 0.017255 0.017538 0.01769 0.01781 0.017134 0.018098 0.017462 0.017685 0.018086 0.017376

11 0.01748 0.017923 0.017184 0.017567 0.017774 0.017525 0.0179 0.017545 0.017512 0.017882

12 0.017156 0.017543 0.017733 0.017958 0.017102 0.01809 0.017616 0.017499 0.018084 0.017374

13 0.01769 0.018037 0.017098 0.017448 0.01777 0.017438 0.017442 0.017674 0.017429 0.017923

14 0.017185 0.017547 0.017727 0.018099 0.017247 0.018171 0.017534 0.017745 0.018155 0.017449

15 0.017649 0.017966 0.017191 0.017571 0.017728 0.017439 0.017889 0.017582 0.017424 0.018016

16 0.017289 0.017546 0.017703 0.018102 0.017228 0.018339 0.017416 0.017808 0.01833 0.01741

17 0.017501 0.018107 0.017216 0.017548 0.017765 0.017633 0.017772 0.017675 0.01763 0.018173



of 53

18 0.017241 0.017512 0.017891 0.018093 0.017396 0.018182 0.018157 0.017764 0.018177 0.017218

19 0.017702 0.018049 0.017243 0.01759 0.017835 0.017653 0.017857 0.017913 0.017637 0.018286

20 0.017265 0.017691 0.01788 0.018157 0.017359 0.018209 0.018028 0.018308 0.018203 0.017428

21 0.017697 0.018202 0.017218 0.017491 0.017754 0.017591 0.018049 0.017853 0.017606 0.01801

22 0.017405 0.017633 0.01792 0.01809 0.017383 0.018148 0.018066 0.017545 0.018123 0.017481

23 0.01772 0.018166 0.017226 0.017654 0.017822 0.017541 0.018057 0.017788 0.017511 0.018076

24 0.017419 0.01749 0.017892 0.018103 0.017282 0.018333 0.018067 0.017865 0.018219 0.017518

25 0.017598 0.01815 0.017342 0.017614 0.017852 0.017751 0.017846 0.017672 0.017719 0.018096

26 0.017408 0.017656 0.01786 0.018119 0.017242 0.018251 0.017932 0.017878 0.018307 0.017526

27 0.017733 0.01802 0.017314 0.017491 0.017852 0.017756 0.01762 0.017751 0.017747 0.017868

28 0.017515 0.017558 0.017943 0.018108 0.01728 0.018186 0.017991 0.017789 0.018147 0.017552

29 0.01761 0.018099 0.017318 0.017636 0.017934 0.017684 0.017765 0.017527 0.017671 0.01802

30 0.017452 0.017428 0.017861 0.017946 0.017157 0.018112 0.017508 0.017793 0.01809 0.017363

31 0.01758 0.018023 0.017185 0.017705 0.01775 0.017682 0.017886 0.017631 0.017663 0.018152

32 0.017464 0.0174 0.017862 0.018071 0.01723 0.01824 0.017487 0.01775 0.018233 0.017412

33 0.017644 0.017864 0.017236 0.017572 0.017631 0.017512 0.018093 0.017669 0.0175 0.01799

34 0.017436 0.017389 0.017754 0.017985 0.01728 0.018131 0.017505 0.017329 0.018113 0.017474

35 0.017606 0.018014 0.017144 0.017523 0.017645 0.017727 0.01782 0.017894 0.017677 0.018087

36 0.017354 0.017122 0.017808 0.017664 0.016998 0.018037 0.017408 0.017749 0.018032 0.017251

37 0.0171 0.016928 0.01788 0.018147 0.017355 0.017919 0.017233 0.017478 0.017862 0.017104

38 0.01765 0.017912 0.017326 0.01732 0.017713 0.017483 0.017656 0.01747 0.017481 0.017626

39 0.017159 0.017702 0.01781 0.018115 0.017243 0.017864 0.017427 0.017599 0.017868 0.017264

40 0.017528 0.01773 0.017433 0.017519 0.017687 0.017535 0.01765 0.017527 0.017525 0.017786

41 0.017202 0.017478 0.017828 0.018008 0.017386 0.017933 0.017642 0.017776 0.017935 0.017137

42 0.017708 0.017634 0.01728 0.017612 0.017697 0.017393 0.017749 0.017495 0.017421 0.017745

43 0.017334 0.017593 0.017726 0.018156 0.017319 0.018144 0.017551 0.01764 0.018147 0.01726

44 0.017685 0.017916 0.017446 0.017736 0.017954 0.017625 0.017781 0.017699 0.01762 0.017959

45 0.017426 0.017865 0.018055 0.018197 0.017483 0.018166 0.017662 0.01788 0.018202 0.017308

46 0.0177 0.016972 0.017359 0.017763 0.017757 0.017561 0.017726 0.017706 0.017537 0.018068

47 0.017278 0.017506 0.017997 0.017123 0.017554 0.018241 0.017505 0.017858 0.018223 0.017382

48 0.017599 0.018086 0.017202 0.017586 0.01795 0.017564 0.017787 0.017658 0.01762 0.018108

49 0.017308 0.017366 0.017872 0.017592 0.017583 0.018125 0.0178 0.017886 0.018112 0.017295

50 0.017679 0.018016 0.017306 0.017835 0.018132 0.017587 0.018122 0.017851 0.017548 0.018171

51 0.017326 0.017783 0.017902 0.017143 0.017602 0.01762 0.017731 0.017882 0.018161 0.017422

52 0.017627 0.017792 0.017311 0.017821 0.018042 0.017498 0.017986 0.0179 0.017495 0.018079

53 0.017358 0.017626 0.017843 0.017181 0.017539 0.018137 0.017613 0.017879 0.018131 0.017441

54 0.017709 0.017997 0.017292 0.017787 0.018022 0.017536 0.01791 0.017696 0.017457 0.01805

55 0.01724 0.017293 0.017867 0.017349 0.017437 0.018064 0.017722 0.01701 0.018036 0.017346

56 0.017681 0.017948 0.017319 0.017842 0.017971 0.017587 0.018001 0.01794 0.017568 0.018078

57 0.01742 0.017564 0.017702 0.017733 0.017425 0.018014 0.017619 0.017977 0.017983 0.017313

58 0.017879 0.017958 0.017689 0.01773 0.018086 0.017663 0.017727 0.01793 0.017599 0.018024

59 0.017509 0.018029 0.01726 0.017969 0.017532 0.018047 0.017704 0.017902 0.018087 0.017324

60 0.017847 0.017491 0.01746 0.017878 0.017984 0.016855 0.018044 0.017684 0.017809 0.018203

61 0.017316 0.017752 0.017519 0.017472 0.017526 0.017377 0.017686 0.017855 0.017376 0.017461

62 0.017926 0.017945 0.017569 0.018044 0.017885 0.016336 0.018155 0.017692 0.017255 0.017876

63 0.017375 0.018035 0.018135 0.017515 0.017354 0.018073 0.017781 0.017946 0.018071 0.017319

64 0.017694 0.017628 0.017447 0.017799 0.01797 0.017615 0.017967 0.017789 0.017593 0.018007

65 0.017354 0.017611 0.017731 0.017216 0.017446 0.018156 0.017896 0.017891 0.018091 0.017293

66 0.017887 0.017881 0.017379 0.017623 0.017845 0.016604 0.017984 0.017705 0.017609 0.018044



of 53

67 0.017436 0.017602 0.017888 0.017678 0.017511 0.01823 0.017519 0.017073 0.018182 0.017351

68 0.017755 0.017323 0.017533 0.016727 0.01768 0.017604 0.01801 0.01757 0.017591 0.017914

69 0.017326 0.017557 0.017906 0.018419 0.017401 0.01801 0.017817 0.017831 0.018006 0.017294

70 0.017585 0.017704 0.017457 0.016839 0.017755 0.017591 0.018063 0.017702 0.017562 0.017931

71 0.017234 0.017536 0.01788 0.018388 0.017273 0.017979 0.017497 0.017786 0.017937 0.01738

72 0.017492 0.017895 0.017273 0.017669 0.017741 0.017303 0.018169 0.017802 0.017311 0.017684

After Thermal

Pos.# B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

1 0.017862 0.01821 0.018084 0.018237 0.018063 0.018407 0.017977 0.017718 0.017233 0.017936

2 0.017481 0.017668 0.018079 0.018065 0.018433 0.018175 0.017976 0.018227 0.017656 0.01803

3 0.017868 0.018256 0.018091 0.018379 0.0178 0.01822 0.017965 0.017733 0.017427 0.018031

4 0.017525 0.017571 0.017971 0.018112 0.01821 0.018082 0.017965 0.018243 0.01765 0.018069

5 0.017935 0.018134 0.017942 0.018331 0.017668 0.01813 0.018055 0.017807 0.017642 0.018075

6 0.017421 0.017624 0.018103 0.01829 0.018256 0.017888 0.017988 0.018366 0.017749 0.018113

7 0.018147 0.018273 0.017941 0.018484 0.017571 0.017925 0.018201 0.018143 0.017551 0.018126

8 0.01762 0.017598 0.017945 0.018392 0.018134 0.017932 0.018048 0.018572 0.017781 0.01836

9 0.018202 0.01834 0.01825 0.018663 0.017624 0.017946 0.018238 0.018418 0.017662 0.018491

10 0.017537 0.017667 0.018131 0.017908 0.018273 0.017873 0.018549 0.018598 0.017726 0.018108

11 0.018223 0.018365 0.018348 0.017983 0.017598 0.017977 0.018391 0.018167 0.017505 0.018079

12 0.01762 0.017649 0.018425 0.017946 0.01834 0.017976 0.018318 0.017742 0.017787 0.018391

13 0.018112 0.01845 0.018284 0.017991 0.017667 0.017965 0.018304 0.018122 0.0178 0.018195

14 0.017548 0.017919 0.018411 0.018036 0.018365 0.017965 0.018294 0.017827 0.018122 0.018309

15 0.018161 0.018205 0.018693 0.017988 0.017649 0.018055 0.018144 0.018116 0.017731 0.017977

16 0.017495 0.018551 0.018477 0.018112 0.01845 0.017988 0.018114 0.017856 0.017986 0.018056

17 0.018131 0.018079 0.018429 0.018021 0.017919 0.018201 0.018067 0.018112 0.017613 0.017885

18 0.017457 0.018421 0.018257 0.018076 0.018205 0.018048 0.018035 0.017914 0.01791 0.018046

19 0.018036 0.017748 0.018236 0.017999 0.018551 0.018238 0.017945 0.018045 0.017722 0.01786

20 0.017568 0.018231 0.018236 0.018152 0.018079 0.018549 0.018144 0.018023 0.018001 0.018012

21 0.017983 0.017614 0.018256 0.017936 0.018421 0.018391 0.017978 0.018237 0.017619 0.017991

22 0.017599 0.018236 0.018083 0.01803 0.017748 0.018318 0.018114 0.018065 0.017727 0.017956

23 0.018087 0.017623 0.018226 0.018031 0.018231 0.018304 0.017871 0.018379 0.017704 0.017933

24 0.017809 0.018155 0.018133 0.018069 0.017614 0.018294 0.018249 0.018112 0.018044 0.01801

25 0.017376 0.017565 0.018258 0.018075 0.018236 0.018144 0.017855 0.018331 0.017686 0.018042

26 0.017255 0.018262 0.018241 0.018113 0.017623 0.018114 0.018264 0.01829 0.018155 0.018069

27 0.018071 0.017611 0.018169 0.018126 0.018155 0.018067 0.018073 0.018484 0.017781 0.018183

28 0.017593 0.0183 0.018245 0.01836 0.017565 0.018035 0.018436 0.018392 0.017967 0.01818

29 0.018091 0.017672 0.018356 0.018491 0.018262 0.017945 0.018386 0.018663 0.017896 0.018076

30 0.017609 0.01834 0.01838 0.018108 0.017611 0.018144 0.018424 0.018708 0.017984 0.01837

31 0.018182 0.017595 0.018491 0.018079 0.0183 0.017978 0.018365 0.017983 0.017519 0.018191

32 0.017591 0.018412 0.018518 0.018391 0.017672 0.018114 0.018047 0.017946 0.01801 0.018165

33 0.018006 0.017741 0.018684 0.018195 0.01834 0.017871 0.018435 0.017991 0.017817 0.018192

34 0.017562 0.018439 0.018251 0.018309 0.017595 0.018249 0.017876 0.018036 0.018063 0.018085

35 0.017937 0.018213 0.018361 0.017977 0.018412 0.017855 0.018104 0.017988 0.017497 0.01804

36 0.017311 0.018107 0.018311 0.018056 0.017741 0.018264 0.0178 0.018112 0.018169 0.017853

37 0.017334 0.018321 0.018381 0.017885 0.018439 0.018073 0.018132 0.018021 0.017863 0.017966

38 0.017699 0.017937 0.017964 0.018046 0.018213 0.018436 0.017783 0.018076 0.017252 0.017903

39 0.017363 0.018251 0.018175 0.01786 0.018107 0.018386 0.018025 0.017999 0.018046 0.017352

40 0.017688 0.017822 0.017968 0.018012 0.018321 0.018424 0.017677 0.018152 0.017494 0.018024

41 0.017537 0.017997 0.018177 0.017991 0.017937 0.018365 0.01804 0.017936 0.017937 0.017398



of 53

42 0.017861 0.017835 0.017817 0.017956 0.018251 0.018047 0.017778 0.01803 0.017536 0.018083

43 0.017393 0.017982 0.018196 0.017933 0.017822 0.018435 0.018045 0.018031 0.017773 0.017463

44 0.017851 0.017819 0.017811 0.01801 0.017997 0.017876 0.017799 0.018069 0.01748 0.01793

45 0.017407 0.01796 0.017918 0.018042 0.017835 0.018104 0.018281 0.018075 0.017929 0.01758

46 0.01781 0.017701 0.017803 0.018069 0.017982 0.0178 0.017895 0.018113 0.017376 0.017862

47 0.017567 0.018162 0.018214 0.018183 0.017819 0.018132 0.018126 0.018126 0.017882 0.017538

48 0.017958 0.017644 0.017838 0.01818 0.01796 0.017783 0.018015 0.01836 0.017374 0.017923

49 0.017448 0.01806 0.018064 0.018076 0.017701 0.018025 0.018482 0.018491 0.017923 0.017543

50 0.018099 0.017765 0.017874 0.01837 0.018162 0.017677 0.018246 0.018108 0.017449 0.018037

51 0.017571 0.018091 0.018197 0.018191 0.017644 0.01804 0.018224 0.018079 0.018016 0.017547

52 0.018102 0.017904 0.017889 0.018165 0.01806 0.017778 0.018439 0.018391 0.01741 0.017966

53 0.017548 0.018186 0.01805 0.018192 0.017765 0.018045 0.018051 0.018195 0.018173 0.017546

54 0.018093 0.018187 0.018371 0.018085 0.018091 0.017799 0.018074 0.018309 0.017218 0.018107

55 0.01759 0.017847 0.018087 0.01804 0.017904 0.018281 0.017718 0.017977 0.018286 0.017512

56 0.018157 0.018073 0.01844 0.017853 0.018186 0.017895 0.018052 0.018056 0.017428 0.018049

57 0.017491 0.017738 0.018023 0.017966 0.018187 0.018126 0.017789 0.017885 0.01801 0.017691

58 0.01809 0.018204 0.01816 0.017903 0.017847 0.018015 0.018175 0.018046 0.017481 0.018202

59 0.017654 0.017698 0.01777 0.017981 0.018073 0.018482 0.017814 0.01786 0.018076 0.017633

60 0.018103 0.01805 0.01802 0.017892 0.017738 0.018246 0.018253 0.018012 0.017518 0.018166

61 0.017614 0.017657 0.017846 0.018031 0.018204 0.018224 0.017718 0.017991 0.018096 0.01749

62 0.018119 0.017984 0.017912 0.017844 0.017698 0.018439 0.018227 0.017956 0.017526 0.01815

63 0.017491 0.017666 0.017725 0.01808 0.01805 0.018051 0.017733 0.017933 0.017868 0.017656

64 0.018108 0.018021 0.017929 0.017818 0.017657 0.018074 0.018243 0.01801 0.017552 0.01802

65 0.017636 0.017656 0.017776 0.018214 0.017984 0.017718 0.017807 0.018042 0.01802 0.017558

66 0.017946 0.017915 0.01804 0.017921 0.017666 0.018052 0.018366 0.018069 0.017363 0.018099

67 0.017705 0.017678 0.017742 0.018093 0.018021 0.017789 0.018143 0.018183 0.018152 0.017428

68 0.018071 0.018024 0.018218 0.0181 0.017656 0.018175 0.018572 0.01818 0.017412 0.018023

69 0.017572 0.017754 0.017975 0.018277 0.017915 0.017814 0.018418 0.018076 0.01799 0.0174

70 0.017985 0.018104 0.01826 0.018164 0.017678 0.018253 0.018598 0.01837 0.017474 0.017864

71 0.017523 0.017814 0.017911 0.01834 0.018024 0.017718 0.018167 0.018191 0.018087 0.017389

72 0.017664 0.018231 0.018139 0.018571 0.017754 0.018227 0.017742 0.018165 0.017251 0.018014



of 53

DATA Continued

MATING/UNMATING:

2 Position

Sample# Initial After 25 Cycles After 50 Cycles After 75 Cycles

Mating Unmating Mating Unmating Mating Unmating Mating Unmating

1 0.84 0.86 0.79 0.72 0.72 0.68 0.70 0.63

2 0.81 0.72 0.78 0.64 0.75 0.62 0.72 0.59

3 0.80 0.66 0.72 0.61 0.70 0.59 0.68 0.55

4 0.89 0.66 0.80 0.58 0.74 0.55 0.70 0.55

5 0.81 0.68 0.76 0.62 0.73 0.54 0.68 0.50

6 0.81 0.63 0.75 0.59 0.72 0.55 0.69 0.54

7 0.82 0.45 0.73 0.44 0.71 0.43 0.67 0.43

8 0.82 0.76 0.74 0.71 0.71 0.64 0.69 0.59

9 0.95 0.70 0.83 0.65 0.76 0.62 0.70 0.60

10 0.87 0.65 0.80 0.60 0.73 0.58 0.71 0.57

Sample# After 100 Cycles After Thermals After Humidity

Mating Unmating Mating Unmating Mating Unmating

1 0.69 0.62 0.58 0.50 0.53 0.46

2 0.72 0.58 0.64 0.52 0.60 0.48

3 0.68 0.54 0.56 0.50 0.52 0.47

4 0.68 0.55 0.58 0.49 0.55 0.49

5 0.63 0.54 0.57 0.45 0.54 0.47

6 0.64 0.53 0.60 0.51 0.61 0.49

7 0.65 0.43 0.55 0.46 0.52 0.44

8 0.63 0.58 0.54 0.49 0.50 0.46

9 0.68 0.56 0.57 0.48 0.53 0.46

10 0.70 0.54 0.62 0.51 0.57 0.48



of 53

DATA Continued

20 Position



1 8.27 7.92 8.27 6.61 8.15 6.51 8.02 6.43

2 7.89 6.91 7.32 6.10 7.23 6.02 7.19 5.99

3 8.02 6.77 7.92 6.90 7.62 6.83 7.50 6.47

4 9.61 8.31 9.39 6.49 9.13 6.52 9.02 6.52

5 9.02 8.31 8.69 6.86 8.49 6.73 8.40 6.67

6 7.52 7.26 7.03 7.02 7.12 6.81 6.98 6.52

7 7.90 7.46 7.76 6.48 7.46 6.18 7.38 6.09

8 9.28 6.60 9.20 6.51 9.07 6.44 8.91 6.45

9 7.89 7.06 7.37 6.47 7.29 6.32 7.25 6.32

10 7.44 7.13 6.67 6.12 6.54 6.07 6.41 5.99



1 7.92 6.34 6.29 6.05 6.69 5.75

2 7.22 5.94 6.70 5.17 6.90 6.08

3 7.33 6.75 7.95 6.38 7.59 6.86

4 8.87 6.47 7.82 6.01 8.00 6.51

5 8.33 6.54 7.52 5.91 7.33 6.62

6 6.78 6.29 6.91 5.37 6.45 5.29

7 7.22 5.87 6.27 5.15 6.11 5.14

8 8.71 6.37 7.24 5.98 7.05 5.38

9 7.32 6.16 6.44 5.82 6.21 5.19

10 6.22 5.85 6.73 5.40 6.39 5.18



of 53

DATA Continued

36 Position



1 18.11 14.09 17.83 13.13 17.52 12.20 17.28 11.92

2 16.85 13.16 15.76 12.40 15.32 11.46 15.04 11.21

3 15.39 13.35 15.03 13.62 14.79 12.31 14.63 12.14

4 16.32 14.51 15.81 12.79 15.64 11.88 15.11 11.36

5 16.44 14.48 16.18 13.18 15.52 12.08 15.27 11.91

6 17.07 12.87 15.21 12.16 15.13 11.84 14.82 11.56

7 16.50 14.12 16.34 13.07 16.09 12.14 15.59 11.84

8 20.83 13.86 19.41 12.54 18.11 11.38 17.58 11.55

9 18.64 12.79 17.76 11.73 16.42 10.90 15.69 10.58

10 15.45 13.50 15.16 12.73 15.09 11.28 14.73 11.05



1 17.13 11.88 14.21 11.24 14.91 12.40

2 14.58 11.04 13.14 11.56 12.72 10.96

3 14.52 11.66 12.87 11.96 12.89 11.32

4 14.52 11.65 12.59 11.36 13.30 12.36

5 14.35 11.50 12.44 11.17 13.30 12.41

6 14.18 11.26 12.73 11.09 13.37 11.48

7 14.42 11.43 12.62 11.32 12.46 11.18

8 16.96 11.48 13.82 11.28 13.11 11.09

9 15.07 10.68 12.94 10.19 12.54 10.23

10 14.27 10.53 12.51 11.22 12.19 11.30



of 53

DATA Continued

NORMAL FORCE (FOR CONTACTS TESTED OUTSIDE THE HOUSING):

Initial Deflections in mm Forces in Grams

Sample

# 0.040 0.060 0.080 0.100 0.120 SET

1 43.00 64.00 88.00 109.00 130.00 0.01000

2 45.00 68.00 89.00 113.00 136.00 0.01000

3 48.00 68.00 91.00 114.00 136.00 0.00300

4 51.00 76.00 100.00 125.00 148.00 0.00500

5 49.00 71.00 94.00 116.00 136.00 0.00500

6 47.00 71.00 93.00 116.00 141.00 0.00300

7 48.00 69.00 93.00 116.00 139.00 0.01000

8 51.00 74.00 98.00 120.00 147.00 0.00700

9 48.00 72.00 94.00 115.00 140.00 0.00600

10 49.00 72.00 96.00 116.00 137.00 0.00300

11 55.00 79.00 101.00 122.00 143.00 0.00200

12 46.00 68.00 89.00 109.00 131.00 0.01000

13 54.00 76.00 98.00 120.00 143.00 0.00100

Thermal Deflections in mm Forces in Grams

Sample

# 0.040 0.060 0.080 0.100 0.120 SET

1 51.00 75.00 90.00 114.00 140.00 0.00000

2 52.00 76.00 100.00 117.00 143.00 0.00000

3 46.00 71.00 92.00 115.00 137.00 0.01000

4 48.00 69.00 92.00 111.00 137.00 0.00200

5 40.00 62.00 81.00 101.00 122.00 0.00200

6 53.00 78.00 102.00 125.00 145.00 0.00000

7 48.00 71.00 96.00 116.00 140.00 0.00300

8 43.00 65.00 85.00 106.00 129.00 0.00000

9 42.00 64.00 85.00 109.00 138.00 0.00600

10 52.00 75.00 95.00 116.00 136.00 0.00000

11 49.00 73.00 96.00 120.00 143.00 0.00500

12 46.00 71.00 92.00 116.00 139.00 0.00500

13 52.00 77.00 101.00 122.00 146.00 0.00000



of 53

DATA Continued

INSULATION RESISTANCE (IR):

Mated

x x x

Sample# SSM/TSM SSM TSM

1 10000 10000 10000

2 10000 10000 10000

Initial Insulation Resistance

Measured In Meg Ohms

Pin to Pin

Unmated

Mated

x x x


1 10000 10000 10000

2 10000 10000 10000


Thermal Insulation Resistance

Unmated

Pin to Pin

Mated

x x x


1 10000 10000 10000

2 10000 10000 10000


Humidity Insulation Resistance

Unmated

Pin to Pin



of 53

DATA Continued

DIELECTRIC WITHSTANDING VOLTAGE (DWV):

Mated


1 1680 1800 2000

2 1440 1770 2000

Initial Breakdown Voltage

Pin to Pin

Unmated

x

Test Voltage Until Breakdown Occurs

1080

Mated


1 1080 1080 1080

2 1080 1080 1080

Unmated

Test Voltage=

Pin to Pin

Initial DWV

1080

Mated


1 1080 1080 1080

2 1080 1080 1080

Thermal Test Voltage

Unmated

Test Voltage=

Pin to Pin

1080

Mated


1 1080 1080 1080

2 1080 1080 1080

Humidity Test Voltage

Unmated

Test Voltage=

Pin to Pin



of 53

DATA Continued

LLCR:

mOhm values Actual Delta Delta Delta

Board Position Initial 100 Cycles Thermal Humidity

1 P1 5.0 -0.1 0.3 1.4

1 P2 5.1 0.2 0.4 0.2

1 P3 5.0 -0.2 0.1 0.6

1 P4 5.3 -0.2 -0.2 -0.4

1 P5 4.4 -0.3 -0.1 -0.2

1 P6 4.7 -0.5 -0.4 0.5

1 P7 5.4 0.2 -0.2 -0.2

1 P8 5.3 -0.1 0.1 4.4

1 P9 5.2 0.0 0.7 1.6

1 P10 5.5 -0.4 -0.6 0.3

1 P11 5.0 0.2 0.8 1.9

1 P12 5.5 -0.7 -0.4 1.2

1 P13 5.0 0.3 0.3 5.7

1 P14 5.4 -0.3 0.2 2.4

1 P15 5.0 0.0 0.3 5.0

1 P16 5.1 0.0 0.0 3.2

1 P17 5.2 0.0 0.2 0.3

1 P18 5.4 0.0 -0.1 1.5

1 P19 5.1 0.1 0.0 0.3

1 P20 4.4 -0.2 -0.1 -0.1

1 P21 4.2 0.0 0.1 0.6

1 P22 5.7 0.2 0.1 0.1

1 P23 5.4 -0.2 -0.1 0.4

1 P24 5.6 -0.3 0.1 0.8

2 P1 5.0 0.1 0.6 0.4

2 P2 5.1 -0.2 0.6 2.6

2 P3 4.9 0.3 1.6 2.1

2 P4 5.3 -0.2 0.4 1.6

2 P5 4.3 -0.1 0.1 0.0

2 P6 4.3 0.1 0.1 0.1

2 P7 5.3 0.2 0.0 0.0

2 P8 5.3 -0.2 0.1 -0.1

2 P9 5.3 -0.2 0.6 0.2

2 P10 5.1 -0.1 0.2 0.3

2 P11 5.4 0.0 -0.1 0.4

2 P12 4.8 0.2 0.3 0.8

2 P13 5.2 0.1 0.3 0.8

2 P14 5.7 -0.3 0.8 1.9

2 P15 5.1 0.0 0.8 0.7

2 P16 5.1 0.1 0.3 0.1

2 P17 5.3 -0.1 0.4 0.0

2 P18 5.2 -0.2 0.2 0.7

2 P19 5.3 0.1 0.4 0.0



of 53

2 P20 4.3 0.2 0.3 0.8

2 P21 4.6 -0.4 1.1 2.7

2 P22 5.5 -0.2 0.7 4.9

2 P23 5.3 -0.1 0.3 1.0

2 P24 5.6 -0.5 -0.3 2.1

3 P1 5.3 0.1 0.1 0.1

3 P2 5.2 0.2 0.2 0.9

3 P3 5.1 0.4 0.5 0.3

3 P4 5.1 0.4 0.3 0.9

3 P5 4.1 0.3 0.2 0.2

3 P6 4.2 0.2 0.4 0.0

3 P7 5.6 -0.4 0.8 -0.2

3 P8 5.2 -0.2 0.0 -0.2

3 P9 5.4 0.2 0.5 -0.1

3 P10 5.1 -0.1 0.5 -0.2

3 P11 6.4 -0.8 -0.6 -0.6

3 P12 5.5 -0.2 -0.3 0.0

3 P13 5.6 -0.5 -0.4 -0.4

3 P14 5.4 -0.5 0.7 0.5

3 P15 5.7 -0.4 -0.3 -0.2

3 P16 5.6 -0.7 -0.3 -0.1

3 P17 5.4 0.0 0.0 0.0

3 P18 5.7 -0.5 -0.3 -0.2

3 P19 5.7 0.0 0.4 0.8

3 P20 4.3 -0.3 0.4 -0.2

3 P21 4.3 -0.2 0.1 -0.1

3 P22 5.7 0.1 0.0 0.1

3 P23 6.1 -0.5 -0.3 0.6

3 P24 5.8 -0.2 0.2 0.2

4 P1 6.0 0.1 1.3 1.2

4 P2 5.7 -0.8 -0.5 -0.6

4 P3 6.0 0.3 0.4 1.9

4 P4 5.7 0.8 0.8 0.6

4 P5 4.3 1.5 0.5 0.6

4 P6 4.2 0.2 -0.2 0.1

4 P7 5.4 0.3 0.2 0.7

4 P8 5.2 0.0 -0.2 -0.2

4 P9 6.3 -1.3 -1.3 -0.9

4 P10 5.2 0.2 0.2 0.1

4 P11 5.9 -0.5 -0.6 1.6

4 P12 5.1 -0.2 -0.1 -0.1

4 P13 5.7 -0.6 -0.6 -0.2

4 P14 5.2 -0.3 -0.4 -0.1

4 P15 5.7 -0.4 -0.8 0.0

4 P16 5.0 0.0 0.0 0.3

4 P17 5.3 -0.1 -0.3 0.2

4 P18 5.6 -0.5 -0.6 -0.4

4 P19 5.5 0.1 -0.3 0.1

4 P20 4.5 -0.3 -0.4 -0.5



of 53

4 P21 4.7 -0.4 -0.4 0.0

4 P22 6.3 -1.1 -1.2 -0.8

4 P23 6.0 -0.6 -0.7 -0.5

4 P24 6.6 -1.0 -1.1 -1.4

5 P1 5.5 -0.3 0.0 0.1

5 P2 5.2 0.1 0.1 0.1

5 P3 5.3 0.1 0.3 0.3

5 P4 5.2 0.1 0.3 0.0

5 P5 4.2 0.1 0.7 0.1

5 P6 4.4 0.1 -0.2 0.2

5 P7 5.5 0.0 0.0 -0.1

5 P8 5.3 0.0 0.0 -0.1

5 P9 5.3 -0.1 0.2 0.2

5 P10 5.1 0.1 0.0 0.1

5 P11 5.7 -0.3 0.6 1.0

5 P12 5.2 -0.3 0.3 -0.1

5 P13 5.3 0.0 0.2 0.3

5 P14 5.1 0.1 0.4 0.2

5 P15 5.3 -0.2 0.5 1.9

5 P16 5.2 -0.3 0.2 0.1

5 P17 5.3 -0.2 0.2 -0.2

5 P18 5.2 0.0 0.1 0.1

5 P19 5.5 -0.1 0.4 -0.3

5 P20 4.2 0.0 0.0 0.3

5 P21 4.5 0.5 0.7 0.1

5 P22 5.5 -0.1 0.2 0.4

5 P23 6.0 -0.1 -0.6 -0.2

5 P24 5.4 0.1 0.5 4.9

6 P1 5.4 -0.2 0.1 -0.2

6 P2 4.9 0.0 -0.1 0.0

6 P3 5.5 -0.5 -0.4 -0.2

6 P4 5.2 -0.3 0.4 0.8

6 P5 5.1 0.2 1.3 1.6

6 P6 4.6 -0.1 -0.1 0.2

6 P7 5.7 -0.5 -0.3 -0.3

6 P8 5.4 -0.4 -0.3 -0.3

6 P9 5.3 -0.2 0.0 0.4

6 P10 5.2 -0.2 0.2 0.7

6 P11 5.1 0.1 0.2 2.5

6 P12 5.2 -0.1 0.0 1.2

6 P13 5.4 -0.3 -0.1 1.6

6 P14 5.1 0.1 -0.1 0.6

6 P15 5.3 -0.1 0.2 1.1

6 P16 5.2 -0.3 0.0 -0.2

6 P17 5.3 -0.3 -0.1 -0.1

6 P18 5.1 0.0 -0.1 0.0

6 P19 5.5 -0.5 0.0 2.1

6 P20 4.1 0.2 0.2 0.5

6 P21 4.6 -0.2 -0.1 0.0



of 53

6 P22 5.6 -0.2 -0.3 -0.1

6 P23 5.3 0.1 0.1 0.3

6 P24 5.3 -0.1 0.1 0.1

7 P1 5.0 0.1 0.0 0.1

7 P2 5.2 -0.3 -0.1 -0.1

7 P3 5.0 0.2 0.0 0.4

7 P4 4.9 0.1 0.1 0.6

7 P5 4.1 0.0 0.0 0.0

7 P6 4.2 0.4 0.0 0.1

7 P7 5.3 0.0 0.2 -0.1

7 P8 5.4 -0.1 0.1 0.7

7 P9 5.4 -0.3 0.0 0.1

7 P10 5.2 -0.4 0.0 -0.3

7 P11 5.6 0.2 -0.3 -0.3

7 P12 5.4 -0.3 0.0 0.5

7 P13 5.5 -0.2 -0.3 -0.4

7 P14 5.5 -0.6 -0.4 -0.3

7 P15 5.4 0.3 -0.2 0.5

7 P16 5.3 0.0 0.0 0.3

7 P17 5.4 -0.1 0.0 0.0

7 P18 5.6 -0.2 -0.1 -0.3

7 P19 5.4 0.0 0.0 -0.1

7 P20 4.4 -0.1 0.0 0.0

7 P21 4.1 0.1 0.1 0.4

7 P22 5.5 0.0 0.1 0.0

7 P23 5.2 0.0 0.0 0.3

7 P24 5.4 -0.1 0.0 0.4

8 P1 5.5 0.5 0.4 0.8

8 P2 5.9 -0.1 -0.3 -0.3

8 P3 5.6 -0.5 -0.1 0.0

8 P4 5.2 -0.3 -0.1 0.1

8 P5 4.6 -0.4 -0.2 3.1

8 P6 4.3 -0.1 0.2 0.5

8 P7 5.5 0.1 0.0 0.0

8 P8 5.4 0.0 0.1 -0.1

8 P9 5.4 -0.1 0.0 0.4

8 P10 5.7 -0.5 -0.5 -0.2

8 P11 5.5 -0.4 -0.2 0.0

8 P12 5.5 -0.3 -0.2 2.3

8 P13 5.4 -0.1 0.2 0.6

8 P14 5.5 -0.1 -0.3 1.4

8 P15 5.4 -0.4 -0.1 3.0

8 P16 5.3 -0.1 0.2 0.3

8 P17 5.4 -0.3 0.1 -0.1

8 P18 5.3 0.0 0.2 0.4

8 P19 5.4 -0.1 0.0 -0.2

8 P20 4.4 -0.1 -0.2 0.7

8 P21 5.0 -0.7 -0.8 -0.5

8 P22 5.7 -0.4 -0.1 -0.3



of 53

8 P23 5.7 -0.3 -0.1 -0.5

8 P24 5.5 -0.4 -0.3 0.0

DATA Continued

GAS TIGHT:

mOhm values Actual Delta

Board Position Initial Gas Tight

1 P1 5.4 -0.2

1 P2 5.3 -0.1

1 P3 5.5 -0.5

1 P4 5.4 0.3

1 P5 4.8 -0.1

1 P6 4.5 -0.1

1 P7 5.1 0.1

1 P8 5.4 -0.4

1 P9 5.5 -0.2

1 P10 5.5 -0.3

1 P11 5.3 0.2

1 P12 5.4 0.0

1 P13 5.7 -0.3

1 P14 5.3 0.2

1 P15 5.4 0.0

1 P16 5.4 -0.1

1 P17 5.1 0.4

1 P18 5.4 0.2

1 P19 5.7 0.0

1 P20 4.6 0.0

1 P21 4.7 -0.5

1 P22 5.6 -0.1

1 P23 5.6 -0.3

1 P24 5.4 -0.1

2 P1 5.5 -0.2

2 P2 5.2 0.0

2 P3 5.1 -0.2

2 P4 5.4 -0.6

2 P5 4.3 -0.2

2 P6 4.3 0.0

2 P7 5.3 0.2

2 P8 5.3 0.0

2 P9 6.1 -0.9

2 P10 5.0 0.1

2 P11 5.4 0.1

2 P12 5.1 0.2

2 P13 5.8 -0.4

2 P14 5.4 -0.2

2 P15 5.6 0.0

2 P16 5.2 -0.1



of 53

2 P17 5.5 0.0

2 P18 5.7 -0.1

2 P19 5.6 0.0

2 P20 4.7 -0.4

2 P21 4.3 -0.6

2 P22 5.7 -0.1

2 P23 5.6 -0.2

2 P24 5.4 0.2

3 P1 5.3 0.0

3 P2 5.6 -0.2

3 P3 5.5 -0.3

3 P4 5.1 0.0

3 P5 4.4 0.0

3 P6 4.5 0.2

3 P7 5.2 0.1

3 P8 5.4 -0.1

3 P9 5.4 -0.3

3 P10 5.2 0.0

3 P11 5.5 0.0

3 P12 5.3 0.2

3 P13 5.3 0.0

3 P14 5.3 -0.3

3 P15 5.5 -0.2

3 P16 5.4 0.1

3 P17 5.0 0.0

3 P18 5.7 -0.1

3 P19 5.3 -0.3

3 P20 4.5 -0.1

3 P21 4.5 -0.2

3 P22 6.0 -0.5

3 P23 5.5 -0.2

3 P24 5.3 0.3

4 P1 5.3 -0.2

4 P2 5.3 -0.3

4 P3 5.1 -0.2

4 P4 5.2 -0.1

4 P5 4.1 0.2

4 P6 4.5 -0.2

4 P7 5.2 -0.1

4 P8 5.4 -0.1

4 P9 5.5 0.0

4 P10 5.3 0.1

4 P11 5.4 0.3

4 P12 5.6 -0.3

4 P13 5.2 0.1

4 P14 5.3 -0.2

4 P15 5.4 0.0

4 P16 5.2 0.2

4 P17 5.4 0.1



of 53

4 P18 5.8 -0.3

4 P19 5.4 -0.1

4 P20 4.5 -0.1

4 P21 4.2 -0.1

4 P22 5.4 -0.1

4 P23 5.5 0.0

4 P24 5.7 -0.1

5 P1 5.5 -0.3

5 P2 5.2 0.0

5 P3 5.3 -0.2

5 P4 5.8 -0.7

5 P5 4.2 -0.3

5 P6 4.8 -0.1

5 P7 5.2 0.0

5 P8 5.4 0.0

5 P9 5.2 -0.1

5 P10 5.4 -0.3

5 P11 5.4 0.2

5 P12 5.5 -0.1

5 P13 5.2 -0.2

5 P14 5.2 -0.1

5 P15 5.4 -0.1

5 P16 5.3 0.0

5 P17 5.1 -0.1

5 P18 5.5 -0.4

5 P19 5.3 -0.1

5 P20 4.4 0.2

5 P21 4.3 -0.1

5 P22 5.5 -0.1

5 P23 5.5 0.0

5 P24 5.4 -0.1

6 P1 5.4 0.1

6 P2 5.0 -0.3

6 P3 5.4 -0.3

6 P4 5.0 0.2

6 P5 4.2 0.0

6 P6 4.6 -0.4

6 P7 5.7 -0.1

6 P8 5.4 0.2

6 P9 5.2 -0.1

6 P10 5.1 -0.1

6 P11 5.6 -0.1

6 P12 5.1 0.1

6 P13 5.3 0.0

6 P14 5.4 0.0

6 P15 5.3 0.1

6 P16 5.3 -0.2

6 P17 5.5 -0.3

6 P18 5.0 0.2



of 53

6 P19 5.7 -0.1

6 P20 4.4 0.0

6 P21 4.4 -0.1

6 P22 5.5 0.1

6 P23 5.7 -0.2

6 P24 5.4 -0.3

7 P1 5.3 0.0

7 P2 5.2 -0.2

7 P3 5.4 0.1

7 P4 5.2 0.1

7 P5 4.3 -0.3

7 P6 4.6 -0.4

7 P7 5.2 -0.1

7 P8 5.2 0.0

7 P9 5.5 -0.1

7 P10 5.1 0.0

7 P11 5.7 -0.2

7 P12 5.2 0.0

7 P13 5.5 -0.4

7 P14 5.2 -0.3

7 P15 5.3 -0.1

7 P16 5.3 0.0

7 P17 5.8 -0.2

7 P18 5.5 -0.3

7 P19 5.9 -0.3

7 P20 4.5 0.0

7 P21 4.3 0.0

7 P22 5.6 -0.2

7 P23 5.4 0.1

7 P24 5.6 -0.2

8 P1 5.3 0.0

8 P2 5.1 0.0

8 P3 5.0 -0.2

8 P4 4.9 0.2

8 P5 4.2 0.1

8 P6 4.7 -0.2

8 P7 5.6 -0.4

8 P8 5.3 -0.2

8 P9 5.3 -0.1

8 P10 5.3 -0.3

8 P11 5.9 -0.4

8 P12 5.9 -0.4

8 P13 5.9 -0.1

8 P14 5.5 -0.1

8 P15 5.7 -0.1

8 P16 5.8 -0.4

8 P17 5.7 -0.5

8 P18 5.5 -0.2

8 P19 5.7 -0.2



of 53

8 P20 4.3 -0.1

8 P21 4.5 0.1

8 P22 5.7 -0.3

8 P23 5.4 0.1

8 P24 5.6 -0.4



of 53

EQUIPMENT AND CALIBRATION SCHEDULES

Equipment #: HZ-MO-03

Description: Micro-ohmmeter

Manufacturer: Keithley

Model: 580

Serial #: 297288

Accuracy: Last Cal: 2009-8-07, Next Cal: 2010-8-06

Equipment #: HZ-TCT-01

Description: Normal force analyzer

Manufacturer: Mecmesin Multitester

Model: Mecmesin Multitester 2.5-i

Serial #: 08-1049-04


Equipment #: HZ-OV-01

Description: Oven

Manufacturer: Huida

Model: CS101-1E

Serial #: CS101-1E-B


Equipment #: HZ-THC-01

Description: Humidity transmitter

Manufacturer: Thermtron

Model: HMM30C

Serial #: D0240037


Equipment #: HZ-MO-01

Description: Micro-ohmmeter

Manufacturer: Keithley

Model: 2700

Serial #: 1199807


Equipment #: HZ-PS-01

Description: Power Supply

Manufacturer: Agilent

Model: 6031A

Serial #: MY41000982


design verification test report tsm/ssm tsm-125-01...

Documents